Commit Graph

18 Commits

Author SHA1 Message Date
Sage Weil
54ad023ba8 ceph: don't use writeback_control in writepages completion
The ->writepages writeback_control is not still valid in the writepages
completion.  We were touching it solely to adjust pages_skipped when there
was a writeback error (EIO, ENOSPC, EPERM due to bad osd credentials),
causing an oops in the writeback code shortly thereafter.  Updating
pages_skipped on error isn't correct anyway, so let's just rip out this
(clearly broken) code to pass the wbc to the completion.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 21:31:40 -07:00
Sage Weil
7ff899da02 ceph: fix lockless caps check
The __ variant requires caller to hold i_lock.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03 10:49:25 -07:00
Linus Torvalds
96e35b40c0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use separate class for ceph sockets' sk_lock
  ceph: reserve one more caps space when doing readdir
  ceph: queue_cap_snap should always queue dirty context
  ceph: fix dentry reference leak in dcache readdir
  ceph: decode v5 of osdmap (pool names) [protocol change]
  ceph: fix ack counter reset on connection reset
  ceph: fix leaked inode ref due to snap metadata writeback race
  ceph: fix snap context reference leaks
  ceph: allow writeback of snapped pages older than 'oldest' snapc
  ceph: fix dentry rehashing on virtual .snap dir
2010-04-14 18:45:31 -07:00
Sage Weil
6298a33757 ceph: fix snap context reference leaks
The get_oldest_context() helper takes a reference to the returned snap
context, but most callers weren't dropping that reference.  Fix them.

Also drop the unused locked __get_oldest_context() variant.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 09:34:37 -07:00
Sage Weil
80e755fede ceph: allow writeback of snapped pages older than 'oldest' snapc
On snap deletion, we don't regenerate ceph_cap_snaps for inodes with dirty
pages because deletion does not affect metadata writeback.  However, we
did run into problems when we went to write back the pages because the
'oldest' snapc is determined by the oldest cap_snap, and that may be the
newer snapc that reflects the deletion.  This caused confusion and an
infinite loop in ceph_update_writeable_page().

Change the snapc checks to allow writeback of any snapc that is equal to
OR older than the 'oldest' snapc.

When there are no cap_snaps, we were also using the realm's latest snapc
for writeback, which complicates ceph_put_wrbufffer_cap_refs().  Instead,
use i_head_snapc, the most snapc used for the most recent ('head') data.
This makes the writeback snapc (ceph_osd_request.r_snapc) _always_ match a
capsnap or i_head_snapc.

Also, in writepags_finish(), drop the snapc referenced by the _page_
and do not assume it matches the request snapc (it may not anymore).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 09:34:36 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sage Weil
8f883c24de ceph: make write_begin wait propagate ERESTARTSYS
Currently, if the wait_event_interruptible is interrupted, we
return EAGAIN unconditionally and loop, such that we aren't, in
fact, interruptible.  So, propagate ERESTARTSYS if we get it.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-23 07:47:03 -07:00
Alexander Beregalov
4ce1e9adab ceph: move dereference after NULL test
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 14:26:34 -08:00
Yehuda Sadeh
e63dc5c780 ceph: remove page upon writeback completion if lost cache cap
This page should have been removed earlier when the cache cap was
revoked, but a writeback was in flight, so it was skipped. We truncate
it here just as the writeback finishes, while it's still locked.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-19 14:34:18 -08:00
Sage Weil
3c6f6b79a6 ceph: cleanup async writeback, truncation, invalidate helpers
Grab inode ref in helper.  Make work functions static, with consistent
naming.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:54 -08:00
Yehuda Sadeh
4af6b2257e ceph: refactor ceph_write_begin, fix ceph_page_mkwrite
Originally ceph_page_mkwrite called ceph_write_begin, hoping that
the returned locked page would be the page that it was requested
to mkwrite. Factored out relevant part of ceph_page_mkwrite and
we lock the right page anyway.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:50 -08:00
Yehuda Sadeh
b056c8769d ceph: remove unused variable
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-11 11:48:48 -08:00
Sage Weil
79788c698b ceph: release all pages after successful osd write response
We release all the pages, even if the osd response was
different than the number of pages written. This could only
happen due to truncation that arrives the osd in
different order, for which we want the pages released anyway.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-02 16:34:04 -08:00
Julia Lawall
ec7384ec23 ceph: remove duplicate variable initialization
The variable client is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-01-25 11:33:35 -08:00
Yehuda Sadeh
2baba25019 ceph: writeback congestion control
Set bdi congestion bit when amount of write data in flight exceeds adjustable
threshold.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:56 -08:00
Yehuda Sadeh
dbd646a851 ceph: writepage grabs and releases inode
Fixes a deadlock that is triggered due to kswapd,
while the page was locked and the iput couldn't tear
down the address space.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2009-12-21 16:39:56 -08:00
Sage Weil
6b8051855d ceph: allocate and parse mount args before client instance
This simplifies much of the error handling during mount.  It also means
that we have the mount args before client creation, and we can initialize
based on those options.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-27 11:57:03 -07:00
Sage Weil
1d3576fd10 ceph: address space operations
The ceph address space methods are concerned primarily with managing
the dirty page accounting in the inode, which (among other things)
must keep track of which snapshot context each page was dirtied in,
and ensure that dirty data is written out to the OSDs in snapshort
order.

A writepage() on a page that is not currently writeable due to
snapshot writeback ordering constraints is ignored (it was presumably
called from kswapd).

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:09 -07:00