Commit Graph

10718 Commits

Author SHA1 Message Date
Linus Torvalds
f2f1756d7d Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] fix saa7111 non-detection
  [media] rc/streamzap: fix reporting response times
  [media] mceusb: really fix remaining keybounce issues
  [media] rc: use time unit conversion macros correctly
  [media] rc/ir-lirc-codec: add back debug spew
  [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
  [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
  [media] hdpvr: fix up i2c device registration
  [media] rc/mce: add mappings for missing keys
  [media] gspca - zc3xx: Discard the partial frames
  [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
  [media] gspca - zc3xx: Bad delay when given by a table
2011-02-02 17:52:19 -08:00
Russell King
bed3c1de66 [media] fix saa7111 non-detection
One saa7111 device is reporting a different ID:

saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip.

As this is for sure a saa7111, change the detection code to also
cover this device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 14:19:50 -02:00
Jarod Wilson
56b0ec30c4 [media] rc/streamzap: fix reporting response times
The streamzap driver has relatively low sampling resolution, and any
delays in reporting events seem to cause some minor problems for the
likes of irw when using the lirc bridge driver, resulting in a single
keypress registering as multiple independent ones, rather than as a
single press with repeats. If we call ir_raw_event_handle() more
frequently and reset the rawir kfifo at end-of-signal, the behavior
improves quite a bit.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:22:13 -02:00
Jarod Wilson
5bd9d73c84 [media] mceusb: really fix remaining keybounce issues
Make sure rawir struct is zeroed out before populating it for each
ir_raw_event_store_with_filter() call, and when we see a trailing 0x80
packet (end-of-data), issue an ir_raw_event_reset() call.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:20:35 -02:00
Jarod Wilson
b4608faee0 [media] rc: use time unit conversion macros correctly
Due to my own stupidity, some of the wrong time unit conversion macros
were being used inside some of the IR drivers I've been working on. Fix
that, and convert over some additional places to also use the macros.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:20:11 -02:00
Jarod Wilson
457e2ffcef [media] rc/ir-lirc-codec: add back debug spew
Some occasionally useful debug spew disappeared as part of a feature
update a while back, and I'm finding myself in need of it again to help
diagnose some issues.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:19:42 -02:00
Jarod Wilson
8df59918b5 [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
Add the same "are you ready?" i2c_master_send() poll command to
get_key_haup_xvr found in lirc_zilog, which is apparently seen in
the Windows driver for the PVR-150 w/a z8. This stabilizes what is
received from both the HD-PVR and HVR-1950, even with their polling
intervals at the default of 100, thus the removal of the custom
260ms polling_interval in pvrusb2-i2c-core.c.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@isely.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:19:15 -02:00
Jarod Wilson
7f2a06deaa [media] hdpvr: fix up i2c device registration
We have to actually call i2c_new_device() once for each of the rx and tx
addresses. Also improve error-handling and device remove i2c cleanup.

Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:18:04 -02:00
Jarod Wilson
86ee659488 [media] rc/mce: add mappings for missing keys
Per http://mediacenterguides.com/book/export/html/31 and investigation
by Erin, we were missing these last three mappings to complete the mce
key table. Lets remedy that.

Reported-by: Erin Simonds <fisslefink@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:16:52 -02:00
Jean-François Moine
a5ecdfb3da [media] gspca - zc3xx: Discard the partial frames
In some cases, some frames may not end with the JPEG end of frame.
Being not complete, they are now discarded.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:48 -02:00
Jean-François Moine
3d244065cb [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
The problem was introduced by the commit 2af0b4c60c.
Some registers were no more initialized.

Tested-by: <Giovanni Scafora giovanni@archlinux.org>
Tested-by: <Sergey Manucharian sm@ingeniware.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:26 -02:00
Jean-François Moine
7c45f2c7fe [media] gspca - zc3xx: Bad delay when given by a table
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:04:25 -02:00
Dmitry Torokhov
54e74b87e2 Input: rc-keymap - return KEY_RESERVED for unknown mappings
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31 13:04:11 +10:00
Linus Torvalds
13a3cec844 Merge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...
2011-01-21 16:50:31 -08:00
David Rientjes
6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Jarod Wilson
559d162e1e [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
The current hdpvr code kmalloc's a new buffer for every i2c read and
write. Rather than do that, lets allocate a buffer in the driver's
device struct and just use that every time.

The size I've chosen for the buffer is the maximum size I could
ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit
of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up
to 128).

Note that this might also remedy user reports of very sluggish behavior
of IR receive with hdpvr hardware.

v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare]

Reported-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:21 -02:00
Jarod Wilson
324b04ba5d [media] hdpvr: enable IR part
A number of things going on here, but the end result is that the IR part
on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or
lirc_zilog.

First up, there are some conditional build fixes that come into play
whether i2c is built-in or modular. Second, we're swapping out
i2c_new_probed_device() for i2c_new_device(), as in my testing, probing
always fails, but we *know* that all hdpvr devices have a z8 chip at
0x70 and 0x71. Third, we're poking at an i2c address directly without a
client, and writing some magic bits to actually turn on this IR part
(this could use some improvement in the future). Fourth, some of the
i2c_adapter storage has been reworked, as the existing implementation
used to lead to an oops following i2c changes c. 2.6.31.

Earlier editions of this patch have been floating around the 'net for a
while, including being patched into Fedora kernels, and they *do* work.
This specific version isn't yet tested, beyond loading ir-kbd-i2c and
confirming that it does bind to the RX address of the hdpvr.

[mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug]
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:20 -02:00
Jarod Wilson
706c57d802 [media] rc/mceusb: timeout should be in ns, not us
Fixes an egregious bug in mceusb driver, where the receiver was being
put into idle mode far sooner than it should have, thanks to storing a
timeout value that in us where it should be ns. Basically, the receiver
kept going into idle mode before a trailing space had been fully
received, which was causing problems for some protocols, most notably
manifesting as lirc userspace never receiving a trailing space for any
rc5 signals.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 12:52:19 -02:00
Hans Verkuil
672dcd5477 [media] v4l2-device: fix 'use-after-freed' oops
Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced
after it was freed.

Normally the i2c adapter is removed before this function is called. Removing
the adapter will also unregister all subdevs on that adapter, so generally
v4l2_device_unregister has nothing to do. However, in the case of a platform
i2c bus that bus is generally not freed.

In that case, after freeing the i2c subdevice the code will fall into the
second block when it tests if the subdev is a SPI device. But by that time
the subdev is already freed and the kernel oopses.

The fix is trivial: continue with the loop after freeing the i2c or spi
subdevice.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:14 -02:00
Hans Verkuil
46b633779b [media] v4l2-dev: don't memset video_device.dev
Zeroing video_device.dev causes a memory leak if video_set_drvdata
was called before video_register_device was called. video_set_drvdata
calls dev_set_drvdata which allocates video_device.dev.p.

memsetting this will prevent freeing of that memory.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:13 -02:00
Hans Verkuil
6ce3ced4f7 [media] zoran: use video_device_alloc instead of kmalloc
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:12 -02:00
Hans Verkuil
bd5ba3ba2e [media] w9966: zero device state after a detach
After a detach zero the whole device state to ensure a clean slate
on the next attach.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:11 -02:00
Laurent Pinchart
eac9aa005a [media] v4l: Fix a use-before-set in the control framework
v4l2_queryctrl sets the step value based on the control type. That would
be fine if it used the control type stored in the V4L2 kernel control
object, not the one stored in the userspace ioctl structure that has
just been memset to 0. Fix this.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:52:10 -02:00
Hans Verkuil
829fb2dcb5 [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then
currently it is replaced by the real internal ID. This is not according to
the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:15 -02:00
Hans Verkuil
c959acfddb [media] v4l2-ctrls: fix missing 'read-only' check
VIDIOC_S_CTRL did not check against read-only controls. Even worse, for
controls of type CTRL_CLASS it would cause a kernel oops since those controls
do not have a s_ctrl op.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:14 -02:00
Andy Walls
4999e27a62 [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
When registering an IR Rx device with the I2C subsystem, provide more detailed
information about the IR device and default remote configuration for the IR
driver modules.

Also explicitly register any IR Tx device with the I2C subsystem.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:13 -02:00
Andy Walls
c69a4af6f0 [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
This reverts a portion of commit

	44243fc2ef

A commit for which I errantly recommended that defaults for I2C address
0x71 not be set by ir-kbd-i2c.c

The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting
defaults for that address.  Until I can get those bridge drivers fixed
to properly send IR_i2c_init_data for boards with Zilog Z8 chips,
just add back the default settings for I2C address 0x71.

Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:46:12 -02:00
Stefan Richter
22f37712f2 [media] firedtv: fix remote control with newer Xorg evdev
After a recent update of xf86-input-evdev and xorg-server, I noticed
that X11 applications did not receive keypresses from the FireDTV
infrared remote control anymore.  Instead, the Xorg log featured lots of

    "FireDTV remote control: dropping event due to full queue!"

exclamations.  The Linux console did not have an issue with the
FireDTV's RC though.

The fix is to insert EV_SYN events after the key-down/-up events.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:59 -02:00
Geert Uytterhoeven
2400982a2e [media] radio-aimslab.c needs #include <linux/delay.h>
Commit e3c9221519 ("[media] radio-aimslab.c: Fix
gcc 4.5+ bug") removed the include, but introduced new callers of msleep():

| drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’:
| drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:57 -02:00
Randy Dunlap
2dbd61b465 [media] ir-raw: fix sparse non-ANSI function warning
Fix sparse warning for non-ANSI function declaration:

drivers/media/rc/ir-raw.c:247:30: warning: non-ANSI function declaration of function 'ir_raw_get_allowed_protocols'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:56 -02:00
Christian Gmeiner
b7eccc46a1 [media] adv7175: support s_power
This patch adds s_power support to adv7175 driver. Power-down is done
by power-down all four DACs.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:55 -02:00
Dan Carpenter
cb26a24ee9 [media] [v3,media] av7110: check for negative array offset
info->num comes from the user.  It's type int.  If the user passes
in a negative value that would cause memory corruption.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:54 -02:00
Jarod Wilson
76f1ef427c [media] rc/imon: default to key mode instead of mouse mode
My initial thinking was that we should default to mouse mode, so people
could use the mouse function to click on something on a login screen,
but a lot of systems where a remote is useful automatically log in a
user and launch a media center application, some of which hide the
mouse, which can be confusing to users if they punch buttons on the
remote and don't see any feedback. Plus, first and foremost, its a
remote, so lets default to being a remote, and only toggle into mouse
mode when the user explicitly asks for it. As a nice side-effect, this
actually simplifies some of the code a fair bit...

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:53 -02:00
Jarod Wilson
5aad724280 [media] rc: fix up and genericize some time unit conversions
The ene_ir driver was using a private define of MS_TO_NS, which is meant
to be microseconds to nanoseconds. The mceusb driver copied it,
intending to use is a milliseconds to microseconds. Lets move the
defines to a common location, expand and standardize them a touch, so
that we now have:

  MS_TO_NS - milliseconds to nanoseconds
  MS_TO_US - milliseconds to microseconds
  US_TO_NS - microseconds to nanoseconds

Reported-by: David Härdeman <david@hardeman.nu>
CC: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:52 -02:00
Jarod Wilson
9ad77eb57b [media] rc/imon: need to submit urb before ffdc type check
Otherwise, we have a null receive buffer, and the logic all falls down,
goes boom, all ffdc devs wind up as imon IR w/VFD. Oops.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:51 -02:00
Kyle McMartin
2e4c55626a [media] rc/ene_ir: fix oops on module load
dev->rdev is accessed in ene_setup_hw_settings, so it needs to be wired
up before then.

[Jarod Wilson]: Also fix a possible improper resource freeing bug while
we're looking at possible probe issues here.

Signed-off-by: Kyle McMartin <kmcmartin@redhat.com>
CC: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:50 -02:00
Jarod Wilson
7d2edfc23e [media] rc/imon: fix ffdc device detection oops
There's a nasty bug that slipped in when the rc device interface was
altered, only affecting the older 0xffdc imon devices. We were trying
to access ictx->rdev->allowed_protos before ictx->rdev had been set.

There's also an issue with call ordering that meant the correct
keymap wasn't getting loaded for MCE IR type 0xffdc devices.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:49 -02:00
Thadeu Lima de Souza Cascardo
e95342f168 [media] DVB: cx231xx drivers does not use dummy frontend anymore
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:48 -02:00
Matti Aaltonen
34b8fc8e68 [media] V4L2: WL1273 FM Radio: Replace ioctl with unlocked_ioctl
Use unlocked_ioctl in v4l2_file_operations. The locking is
already in place.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:47 -02:00
Tejun Heo
a3bc5e3304 [media] v4l/cx18: update workqueue usage
With cmwq, there's no reason to use separate out_work_queue.  Drop it
and use system_wq instead.  The in_work_queue needs to be ordered so
can't use one of the system wqs; however, as it isn't used to reclaim
memory, allocate the workqueue with alloc_ordered_workqueue() without
WQ_MEM_RECLAIM.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:46 -02:00
Jesper Juhl
fd01ad9894 [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic()
Hi,

While reading
drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I
noticed that

 - We don't free the memory allocated to 'urb' if the call to
   usb_alloc_coherent() fails.
 - If the 'num' argument to the function is ever <= 0 we'll return an
   uninitialized variable 'i' to the caller.

The following patch addresses both of the above by a) calling
usb_free_urb() when usb_alloc_coherent() fails and by explicitly
initializing 'i' to zero.
I also moved the variables 'mem' and 'urb' inside the for loop. This does
not actually make any difference, it just seemed more correct to me to let
variables exist only in the innermost scope they are used.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:45 -02:00
Jesper Juhl
36fd97884d [media] frontends/ix2505v: Remember to free allocated memory in failure path
We may leak the storage allocated to 'state' in
drivers/media/dvb/frontends/ix2505v.c::ix2505v_attach() on error, as
it is too early to be able to call ix2505v_release().

This patch makes sure we free the allocated memory in the failure case.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:44 -02:00
Jean-François Moine
a63d601803 [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614a
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:43 -02:00
Jean-François Moine
3afef85bfe [media] gspca - sonixj: Infrared bug fix and enhancement
The infrared was set by sensor write instead of bridge GPIO.
It is now settable by the standard control ILLUMINATOR_1.
A module parameter permits to set the right GPIO bit according
to the StarCam model.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:42 -02:00
Jean-François Moine
14b67c2969 [media] gspca - ov534: Propagate errors to higher level
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:41 -02:00
Jean-François Moine
ddffa49e25 [media] gspca - ov534: Clearer debug messages
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:39 -02:00
Jean-François Moine
fc63de88e0 [media] gspca - ov519: Cleanup source and add a comment
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:38 -02:00
Jean-François Moine
ded5e903b7 [media] gspca: Remove useless instructions
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:37 -02:00
Jean-François Moine
95c967c167 [media] gspca: Remove __devinit, __devinitconst and __devinitdata
__devinit* must not be used in USB drivers.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:35 -02:00
Jean-François Moine
0beb6714e7 [media] gspca: Version change
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19 11:45:33 -02:00