Commit Graph

18 Commits

Author SHA1 Message Date
Divy Le Ray
bf792094ef cxgb3: detect mac link faults.
The driver currently ignores the local or remote link faults
raised at the mac layer. This patch fixes it.
Our mac however only advertizes link events, so wait for the
phy to stabilize the link, then enable mac link events interrupts.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:47 -07:00
Divy Le Ray
fc88219601 cxgb3: disable high freq non-data interrupts
Under RX pressure, The HW might generate a high load of interrupts
to signal mac fifo or free lists overflow.
Disable the interrupts, and poll the relevant status bits
to maintain stats.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:45 -07:00
Divy Le Ray
f231e0a5a2 cxgb3: More flexible support for PHY interrupts.
Do not require PHY interrupts to be connected to GPIs in ascending order.
Base interrupt availability both on PHYs supporting them and on GPIs being
hooked up.  Allows boards to specify interrupt GPIs though the PHYs don't
use them.

Remove spurious PHY interrupts due to clearing T3DBG interrupts before
setting their polarity.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 17:39:00 -07:00
Karen Xie
9439f74944 cxgb3 - Add iscsi support
Add iSCSI (S3xx) support.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:20:33 -04:00
Divy Le Ray
204e2f98c2 cxgb3 - fix EEH
Reset the chip when the PCI link goes down.
Preserve the napi structure when a sge qset's resources are freed.
Replay only HW initialization when the chip comes out of reset.

Signed-off-by: Divy Le ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:37 -04:00
Divy Le Ray
b881955b7d cxgb3 - parity initialization for T3C adapters.
Add parity initialization for T3C adapters.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:22 -08:00
Divy Le Ray
a2604be548 cxgb3 - HW set up updates
Disable PEX errors. The HW generates false positives.
Update RSS hash function to a symmetric algorithm.
Update T3C HW support

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:04:11 -08:00
Divy Le Ray
75758e8aa4 cxgb3 - T3C support update
Update GPIO mapping for T3C.
Update xgmac for T3C support.
Fix typo in mtu table.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-07 15:00:36 -05:00
Divy Le Ray
3f61e4278c cxgb3 - Update internal memory management
Set PM1 internal memory to round robin mode
It balances access to this internal memory for multiport adapters.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:51 -07:00
Divy Le Ray
6e3f03b72c cxgb3 - SGE doorbell overflow warning
Log doorbell Fifo overflow

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:50:47 -07:00
Divy Le Ray
480fe1a31c cxgb3 - TP SRAM update
The chip executes microcode present in internal RAM,
whose content is loaded from EEPROM on power cycle.
This patch allows an update of the microcode through PIO
without forcing a power cycle.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Divy Le Ray
8a9fab22cf cxgb3 - Firmware update
Update FW to 4.1.
Proceed to subsequent HW tuning to improve RDMA perfs..

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Divy Le Ray
7b581a0fa8 cxgb3 - Stop mac RX when changing MTU
Rx traffic needs to be halted when the MTU is changed
to avoid a potential chip hang.
Reset/restore MAC filters around a MTU change.
Also fix the pause frames high materwark setting.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:59 -04:00
Divy Le Ray
c706bfb52a cxgb3 - Fix direct XAUI support
Check all lanes for link status on direct XAUI cards.
Don't assume that direct XAUI always uses XGMAC 1.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-20 19:16:58 -04:00
Divy Le Ray
6cdbd77e88 cxgb3 - missing CPL hanler and register setting.
Remove specific CPL handler.
Add missing CPL handler.
Add missing register setting when the interface is brought up.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 11:54:43 -04:00
Divy Le Ray
6d6dabac38 cxgb3 - Tighten xgmac workaround
Run the watchdog task when the link is up.
Flush the XGMAC Tx FIFO when the link drops.

Also remove a statistics update that should have gone
in the previous modification of xgmac.c.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-03 22:31:09 -04:00
Divy Le Ray
fc90664e34 cxgb3 - Fix potential MAC hang
Under rare conditions, the MAC might hang while generating a pause frame.
This patch fine tunes the MAC settings to avoid the issue, allows for
periodic MAC state check, and triggers a recovery if hung.

Also fix one MAC statistics counter for the rev board T3B2.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23 01:48:34 -04:00
Divy Le Ray
4d22de3e6c Add support for the latest 1G/10G Chelsio adapter, T3.
This driver is required by the Chelsio T3 RDMA driver posted by
Steve Wise.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:46 -05:00