Commit Graph

326 Commits

Author SHA1 Message Date
Roland Dreier
fd9cfdd11b IB/mthca: Semaphore to mutex conversions
Convert semaphores to mutexes in mthca.  Leave firmware command
interface poll_sem and event_sem as semaphores.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 16:45:11 -08:00
Michael S. Tsirkin
e3aa31c517 IB/mthca: Don't cancel commands on a signal
We have run into the following problem: if a task receives a signal
while in the process of e.g. destroying a resource (which could be
because the relevant file was closed) mthca could bail out from trying
to take a command interface semaphore without performing the
appropriate command to tell hardware that the resource is being
destroyed.

As a result we see messages like
 ib_mthca 0000:04:00.0: HW2SW_CQ failed (-4)

In this case, hardware could access the resource after the memory has
been freed, possibly causing memory corruption.

A simple solution is to replace down_interruptible() by down() in
command interface activation.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
[ It's also not safe to bail out on multicast table operations, since
  they may be invoked on the cleanup path too.  So use down() for
  mcg_table.sem too. ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 16:22:29 -08:00
Ingo Molnar
8e9e5f4f5e IB/srp: Semaphore to mutex conversion
Convert srp_host->target_mutex from a semaphore to a mutex.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:21:21 -08:00
Michael S. Tsirkin
cbd2981a97 IB/mthca: Relax UAR size check
There are some cards around that have UAR (user access region) size
different from 8 MB.  Relax our sanity check to make sure that the PCI
BAR is big enough to access the UAR size reported by the device
firmware instead.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30 15:20:35 -08:00
Michael S. Tsirkin
f9e61929e5 IB/mthca: Use correct GID in MADs sent on port 2
mthca_create_ah() includes the port number in the GID index. The reverse
needs to be done in mthca_read_ah().

Noted by Hal Rosenstock.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-21 14:02:59 -08:00
Michael S. Tsirkin
b36f170b61 IPoIB: Lock accesses to multicast packet queues
Avoid corrupting mcast->pkt_queue by serializing access with
priv->tx_lock.  Also, update dropped packet statistics to count
multicast packets removed from pkt_queue as dropped.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17 12:19:40 -08:00
Michael S. Tsirkin
0f47ae0b3e IB/sa_query: Flush scheduled work before unloading module
sa_query schedules work on IB asynchronous events.  After
unregistering the async event handler, make sure that this work has
completed before releasing the IB device (and possibly allowing the
sa_query module text to go away).

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17 09:53:51 -08:00
Michael S. Tsirkin
cc76e33ec9 IB/uverbs: Flush scheduled work before unloading module
uverbs might schedule work to clean up when a file is closed.  Make
sure that this work runs before allowing module text to go away.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17 09:41:47 -08:00
Michael S. Tsirkin
47f7a0714b IPoIB: Make sure path is fully initialized before using it
The SA path record query completion can initialize path->pathrec.dlid
before IPoIB's callback runs and initializes path->ah, so we must test
ah rather than dlid.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-17 09:22:05 -08:00
Arjan van de Ven
858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Ingo Molnar
95ed644fd1 IB: convert from semaphores to mutexes
semaphore to mutex conversion by Ingo and Arjan's script.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Sanity-checked on real IB hardware ]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-13 14:51:39 -08:00
Michael S. Tsirkin
9eacee2ac6 IB/mthca: Initialize grh_present before using it
build_mlx_header() was using sqp->ud_header.grh_present before it was
initialized by mthca_read_ah().  Furthermore, header->grh_present is
set by ib_ud_header_init, so there's no need to set it again in
mthca_read_ah().

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:55:41 -08:00
Michael S. Tsirkin
c063a06835 IB/mthca: Cosmetic: use the ALIGN macro
Use the ALIGN macro to simplify some rounding code.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:43:58 -08:00
Jack Morgenstein
17e2e81951 IB/mthca: Fix memory leaks in error handling
Fix memory leaks in mthca_create_qp() and mthca_create_srq()
error handling.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:35:15 -08:00
Ishai Rabinovitz
59f174faff IB/mthca: Fix memory leak of multicast group structures
Convert "/ (1 << lg)" to ">> lg" for a slight code size reduction.

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function                                     old     new   delta
mthca_map_cmd                                613     589     -24

Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 15:24:51 -08:00
Eli Cohen
988bd50300 IPoIB: Fix memory leak of multicast group structures
The current handling of multicast groups in IPoIB ends up never
freeing send-only multicast groups.  It turns out the logic was much
more complicated than it needed to be; we can fix this bug and
completely kill ipoib_mcast_dev_down() at the same time.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12 14:32:20 -08:00
Michael S. Tsirkin
78bfe0b5b6 IPoIB: Take dev->xmit_lock around mc_list accesses
dev->mc_list accesses must be protected by dev->xmit_lock.
Found by Eli Cohen <eli@mellanox.co.il>.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-11 11:47:34 -08:00
Eli Cohen
97460df37e IPoIB: Fix address handle refcounting for multicast groups
Multiple ipoib_neigh structures on mcast->neigh_list may point to the
same ah.  This means that ipoib_mcast_free() can't just make a list of
ah structs to free, since this might end up trying to add the same ah
to the list more than once.  Handle this in ipoib_multicast.c in the
same way as it is handled in ipoib_main.c for struct ipoib_path.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10 07:43:02 -08:00
Eli Cohen
70b4c8cdc1 IPoIB: Fix error path in ipoib_mcast_dev_flush()
Don't leak memory on allocation failure for broadcast mcast group.
Also, print a warning to match handling for other mcast groups.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10 07:42:14 -08:00
Sean Hefty
cf311cd49a IB: Add node_guid to struct ib_device
Add a node_guid field to struct ib_device.  It is the responsibility
of the low-level driver to initialize this field before registering a
device with the midlayer.  Convert everyone to looking at this field
instead of calling ib_query_device() when all they want is the node
GUID, and remove the node_guid field from struct ib_device_attr.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10 07:39:34 -08:00
Roland Dreier
87635b71b5 IB/mthca: Factor common MAD initialization code
Factor out common code for initializing MAD packets, which is shared
by many query routines in mthca_provider.c, into init_query_mad().

add/remove: 1/0 grow/shrink: 0/4 up/down: 16/-44 (-28)
function                                     old     new   delta
init_query_mad                                 -      16     +16
mthca_query_port                             521     518      -3
mthca_query_pkey                             301     294      -7
mthca_query_device                           648     641      -7
mthca_query_gid                              453     426     -27

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09 15:29:53 -08:00
Roland Dreier
105e50a5e8 IB/mthca: kzalloc conversions
Convert kmalloc()/memset(,0,) pairs to kzalloc().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09 15:21:21 -08:00
Michael S. Tsirkin
92898522e3 IB/mthca: prevent event queue overrun
I am seeing EQ overruns in SDP stress tests: if the CQ completion
handler arms a CQ, this could generate more EQEs, so that EQ will
never get empty and consumer index will never get updated.

This is similiar to what we have with command interface:
		/*
		 * cmd_event() may add more commands.
		 * The card will think the queue has overflowed if
		 * we don't tell it we've been processing events.
		 */
However, for completion events, we *don't* want to update the consumer
index on each event. So, perform EQ doorbell coalescing: allocate EQs
with some spare EQEs, and update once we run out of them.

The value 0x80 was selected to avoid any performance impact.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09 14:04:40 -08:00
Michael S. Tsirkin
6627fa662e IB/mthca: fix page shift calculation in mthca_reg_phys_mr()
For all pages except possibly the last one, the byte beyond the buffer
end must be page aligned.  Therefore, when computing the page shift to
use, OR the end addresses of the buffers as well as the start
addresses into the mask we check.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09 13:50:57 -08:00
Linus Torvalds
5367f2d67c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband 2006-01-08 20:18:44 -08:00
Tim Schmielau
de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Ralph Campbell
4f8448dfe8 IB: Set GIDs correctly in ib_create_ah_from_wc()
ib_create_ah_from_wc() doesn't create the correct return address (AH)
when there is a GRH present (source & dest GIDs need to be swapped).

Signed-off-by: Ralph Campbell <ralphc@pathscale.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 16:43:47 -08:00
Jack Morgenstein
ac4e7b3557 IB/uverbs: Release event file reference on ib_uverbs_create_cq() error
ib_uverbs_create_cq() should release the completion channel event file
if an error occurs after it looks it up.  Also, if userspace asks for
a completion channel and we don't find it, an error should be returned
instead of silently creating a CQ without a completion channel.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 16:43:14 -08:00
Ralph Campbell
ea5d4a6ad2 IB/uverbs: set ah_flags when creating address handle
AH attribute's ah_flags need to be set according to the is_global flag
passed in from userspace.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 16:24:45 -08:00
Jack Morgenstein
b4ca1a3f8c IB/uverbs: Fix reference counting on error paths
If an operation fails after incrementing an object's reference count,
then it should decrement the reference count on the error path.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 16:21:19 -08:00
Dotan Barak
4de144bf72 IB/mthca: Add support for automatic path migration (APM)
Add code to modify QP operation to handle setting alternate paths for
connected QPs.

Signed-off-by: Dotan Barak <dotanb@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 13:23:58 -08:00
Michael S. Tsirkin
0f8e8f9607 IB/mthca: Fill in vendor_err field in completion with error
Fill vendor_err field in completion with error.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 13:13:32 -08:00
Jack Morgenstein
5ceb74557c IB/mthca: multiple fixes for multicast group handling
Multicast group management fixes:
. Fix leak of mailbox memory in error handling on multicast group operations.
. Free AMGM indices at detach and in attach error handling.
. Fix amount to shift for aligning next_gid_index in mailbox: it
  starts at bit 6, not bit 5.
. Allocate AMGM index after end of MGM table, in the range num_mgms to
  multicast table size - 1. Add some BUG_ON checks to catch cases
  where the index falls in the MGM hash area.
. Initialize the list of QPs in a newly-allocated group from AMGM to 0
  This is necessary since when a group is moved from AMGM to MGM (in the
  case where the MGM entry has been emptied of QPs), the AMGM entry is
  not reset to 0 (and we don't want an extra command to do that).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 13:11:07 -08:00
Jack Morgenstein
0d3b525fff IB/mthca: fix for RTR-to-RTS transition in modify QP
PKEY_INDEX is not a legal parameter in the RTR->RTS transition.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 13:03:43 -08:00
Jack Morgenstein
0364ffc3e8 IB/mthca: fix for SQEr-to-RTS transition in modify QP
Fixes to SQEr->RTS transition in modify_qp:
1. The flag IB_QP_ACCESS_FLAGS is optional for UC qps
2. The SQEr state is not supported for RC qps

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 13:01:27 -08:00
Jack Morgenstein
5b3bc7a681 IB/mthca: max_inline_data handling tweaks
Fix a case where copying max_inline_data from a successful create_qp
capabilities output to create_qp input could cause EINVAL error:

mthca_set_qp_size must check max_inline_data directly against
max_desc_sz; checking qp->sq.max_gs is wrong since max_inline_data
depends on the qp type and does not involve max_sg.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06 12:57:30 -08:00
Michael S. Tsirkin
466200562c IB/mthca: create_eq with size not a power of 2
Fix mthca_create_eq for when the EQ size is not a power of 2.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05 16:17:38 -08:00
Jack Morgenstein
38d1e79347 IB/mthca: check port validity in modify_qp
Modify_qp should check that the physical port number provided
is a legal value.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05 16:13:46 -08:00
Jack Morgenstein
aa2f936779 IB/mthca: check return value in mthca_dev_lim call
Check error return on call to mthca_dev_lim for Tavor
(as is done for memfree).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05 16:12:01 -08:00
Linus Torvalds
db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Kay Sievers
312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Jack Morgenstein
1d7d2f6f47 IB/mthca: fix WQE size calculation in create-srq
Thinko: 64 bytes is the minimum SRQ WQE size (not the maximum).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-04 14:42:39 -08:00
Arnaldo Carvalho de Melo
14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
Jack Morgenstein
c4342d8a4d IB/mthca: Fix corner cases in max_rd_atomic value handling in modify QP
sae and sre bits should only be set when setting sra_max.  Further, in
the old code, if the caller specifies max_rd_atomic = 0, the sre and
sae bits are still set, with the result that the QP ends up with
max_rd_atomic = 1 in effect.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15 19:59:01 -08:00
Jack Morgenstein
d1646f86a2 IB/mthca: Fix IB_QP_ACCESS_FLAGS handling.
This patch corrects some corner cases in managing the RAE/RRE bits in
the mthca qp context.  These bits need to be zero if the user requests
max_dest_rd_atomic of zero.  The bits need to be restored to the value
implied by the qp access flags attribute in a previous (or the
current) modify-qp command if the dest_rd_atomic variable is changed
to non-zero.

In the current implementation, the following scenario will not work:
RESET-to-INIT 	set QP access flags to all disabled (zeroes)
INIT-to-RTR     set max_dest_rd_atomic=10, AND
		set qp_access_flags = IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_ATOMIC

The current code will incorrectly take the access-flags value set in
the RESET-to-INIT transition.

We can simplify, and correct, this IB_QP_ACCESS_FLAGS handling: it is
always safe to set qp access flags in the firmware command if either
of IB_QP_MAX_DEST_RD_ATOMIC or IB_QP_ACCESS_FLAGS is set, so let's
just set it to the correct value, always.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15 14:36:24 -08:00
Jack Morgenstein
576d2e4e40 IB/mthca: Fix SRQ cleanup during QP destroy
When cleaning up a CQ for a QP attached to SRQ, need to free an SRQ
WQE only if the CQE is a receive completion.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15 14:20:23 -08:00
Michael S. Tsirkin
6c7d2a75b5 IB/mthca: Fix thinko in mthca_table_find()
break only escapes from the innermost loop, and we want to escape both
loops and return an answer.  Noticed by Ishai Rabinovitch.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15 13:55:50 -08:00
Jack Morgenstein
44b5b03033 IB/mthca: don't change driver's copy of attributes if modify QP fails
Only change the driver's copy of the QP attributes in modify QP after
checking the modify QP command completed successfully.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09 16:40:14 -08:00
Jack Morgenstein
6aa2e4e806 IB/mthca: correct log2 calculation
Fix thinko in rd_atomic calculation: ffs(x) - 1 does not find the next
power of 2 -- it should be fls(x - 1).

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09 16:38:04 -08:00
Jack Morgenstein
94361cf74a IB/mthca: check RDMA limits
Add limit checking on rd_atomic and dest_rd_atomic attributes:
especially for max_dest_rd_atomic, a value that is larger than HCA
capability can cause RDB overflow and corruption of another QP.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-09 16:32:21 -08:00