Commit Graph

7554 Commits

Author SHA1 Message Date
Pekka Enberg
22fb4e71e6 irq: use kcalloc() instead of the bootmem allocator
Fixes the following problem:

[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:256
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: at mm/bootmem.c:537 alloc_arch_preferred_bootmem+0x40/0x7e()
[    0.000000] Hardware name: To Be Filled By O.E.M.
[    0.000000] Pid: 0, comm: swapper Not tainted 2.6.30-tip-02161-g7a74539-dirty #59709
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff823f8c8e>] ? alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff81067168>] warn_slowpath_common+0x88/0xcb
[    0.000000]  [<ffffffff810671d2>] warn_slowpath_null+0x27/0x3d
[    0.000000]  [<ffffffff823f8c8e>] alloc_arch_preferred_bootmem+0x40/0x7e
[    0.000000]  [<ffffffff823f9307>] ___alloc_bootmem_nopanic+0x4e/0xec
[    0.000000]  [<ffffffff823f93c5>] ___alloc_bootmem+0x20/0x61
[    0.000000]  [<ffffffff823f962e>] __alloc_bootmem+0x1e/0x34
[    0.000000]  [<ffffffff823f757c>] early_irq_init+0x6d/0x118
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e0cf7>] start_kernel+0x192/0x394
[    0.000000]  [<ffffffff823e0140>] ? early_idt_handler+0x0/0x71
[    0.000000]  [<ffffffff823e02ad>] x86_64_start_reservations+0xb4/0xcf
[    0.000000]  [<ffffffff823e0000>] ? __init_begin+0x0/0x140
[    0.000000]  [<ffffffff823e0420>] x86_64_start_kernel+0x158/0x17b
[    0.000000] ---[ end trace a7919e7f17c0a725 ]---
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2002.510 MHz processor.
[    0.004000] Console: colour VGA+ 80x25

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:13 +03:00
Pekka Enberg
0fb5302916 sched: use slab in cpupri_init()
Lets not use the bootmem allocator in cpupri_init() as slab is already up when
it is run.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:12 +03:00
Pekka Enberg
4bdddf8ff9 sched: use alloc_cpumask_var() instead of alloc_bootmem_cpumask_var()
Slab is initialized when sched_init() runs now so lets use alloc_cpumask_var().

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:11 +03:00
Yinghai Lu
dad213aeb5 irq/cpumask: make memoryless node zero happy
Don't hardcode to node zero for early boot IRQ setup memory allocations.

[ penberg@cs.helsinki.fi: minor cleanups ]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:08 +03:00
Yinghai Lu
38c7fed2f5 x86: remove some alloc_bootmem_cpumask_var calling
Now that we set up the slab allocator earlier, we can get rid of some
alloc_bootmem_cpumask_var() calls in boot code.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:07 +03:00
Pekka Enberg
36b7b6d465 sched: use kzalloc() instead of the bootmem allocator
Now that kmem_cache_init() happens before sched_init(), we should use kzalloc()
and not the bootmem allocator.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:04 +03:00
Catalin Marinas
4f2294b6dc kmemleak: Add modules support
This patch handles the kmemleak operations needed for modules loading so
that memory allocations from inside a module are properly tracked.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-06-11 17:03:31 +01:00
Ingo Molnar
940010c5a3 Merge branch 'linus' into perfcounters/core
Conflicts:
	arch/x86/kernel/irqinit.c
	arch/x86/kernel/irqinit_64.c
	arch/x86/kernel/traps.c
	arch/x86/mm/fault.c
	include/linux/sched.h
	kernel/exit.c
2009-06-11 17:55:42 +02:00
Peter Zijlstra
cca3f454a8 perf_counter: Add counter->id to the throttle event
So as to be able to distuinguish between multiple counters.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:54:45 +02:00
Peter Zijlstra
f4dbfa8f31 perf_counter: Standardize event names
Pure renames only, to PERF_COUNT_HW_* and PERF_COUNT_SW_*.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:54:15 +02:00
Peter Zijlstra
1c432d899d perf_counter: Rename enums
Rename the perf enums to be in the 'perf_' namespace and strictly
enumerate the ABI bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 17:53:41 +02:00
Peter Zijlstra
df58ab24bf perf_counter: Rename perf_counter_limit sysctl
Rename perf_counter_limit to perf_counter_max_sample_rate and
prohibit creation of counters with a known higher sample
frequency.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 16:48:38 +02:00
Peter Zijlstra
0764771dab perf_counter: More paranoia settings
Rename the perf_counter_priv knob to perf_counter_paranoia (because
priv can be read as private, as opposed to privileged) and provide
one more level:

 0 - permissive
 1 - restrict cpu counters to privilidged contexts
 2 - restrict kernel-mode code counting and profiling

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 16:48:38 +02:00
john stultz
3f68535ada clocksource: sanity check sysfs clocksource changes
Thomas, Andrew and Ingo pointed out that we don't have any safety checks
in the clocksource sysfs entries to make sure sysadmins don't try to
change the clocksource to a non high-res timer capable clocksource (such
as jiffies) when high-res timers (HRT) is enabled.  Doing so will likely
hang a system.

Correct this by filtering non HRT clocksources from available_clocksources
and not accepting non HRT clocksources with HRT enabled.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-06-11 11:24:52 +02:00
Paul Mundt
cf9fe114e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-06-11 09:01:14 +03:00
Linus Torvalds
991ec02cdc Merge branch 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  function-graph: always initialize task ret_stack
  function-graph: move initialization of new tasks up in fork
  function-graph: add memory barriers for accessing task's ret_stack
  function-graph: enable the stack after initialization of other variables
  function-graph: only allocate init tasks if it was not already done

Manually fix trivial conflict in kernel/trace/ftrace.c
2009-06-10 19:58:10 -07:00
Linus Torvalds
8623661180 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
  Revert "x86, bts: reenable ptrace branch trace support"
  tracing: do not translate event helper macros in print format
  ftrace/documentation: fix typo in function grapher name
  tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
  tracing: add protection around module events unload
  tracing: add trace_seq_vprint interface
  tracing: fix the block trace points print size
  tracing/events: convert block trace points to TRACE_EVENT()
  ring-buffer: fix ret in rb_add_time_stamp
  ring-buffer: pass in lockdep class key for reader_lock
  tracing: add annotation to what type of stack trace is recorded
  tracing: fix multiple use of __print_flags and __print_symbolic
  tracing/events: fix output format of user stack
  tracing/events: fix output format of kernel stack
  tracing/trace_stack: fix the number of entries in the header
  ring-buffer: discard timestamps that are at the start of the buffer
  ring-buffer: try to discard unneeded timestamps
  ring-buffer: fix bug in ring_buffer_discard_commit
  ftrace: do not profile functions when disabled
  tracing: make trace pipe recognize latency format flag
  ...
2009-06-10 19:53:40 -07:00
Linus Torvalds
8f40642ad3 Merge branch 'signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hookup sys_rt_tgsigqueueinfo
  signals: implement sys_rt_tgsigqueueinfo
  signals: split do_tkill
2009-06-10 19:50:52 -07:00
Linus Torvalds
20f3f3ca49 Merge branch 'rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: rcu_sched_grace_period(): kill the bogus flush_signals()
  rculist: use list_entry_rcu in places where it's appropriate
  rculist.h: introduce list_entry_rcu() and list_first_entry_rcu()
  rcu: Update RCU tracing documentation for __rcu_pending
  rcu: Add __rcu_pending tracing to hierarchical RCU
  RCU: make treercu be default
2009-06-10 19:50:03 -07:00
James Morris
73fbad283c Merge branch 'next' into for-linus 2009-06-11 11:03:14 +10:00
Peter Zijlstra
9e350de37a perf_counter: Accurate period data
We currently log hw.sample_period for PERF_SAMPLE_PERIOD, however this is
incorrect. When we adjust the period, it will only take effect the next
cycle but report it for the current cycle. So when we adjust the period
for every cycle, we're always wrong.

Solve this by keeping track of the last_period.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 02:39:02 +02:00
Peter Zijlstra
df1a132bf3 perf_counter: Introduce struct for sample data
For easy extension of the sample data, put it in a structure.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 02:39:02 +02:00
Peter Zijlstra
66fff22483 perf_counter: Annotate exit ctx recursion
Ever since Paul fixed it to unclone the context before taking the
ctx->lock this became a false positive, annotate it away.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-11 02:39:01 +02:00
Linus Torvalds
e7241d7714 Merge branch 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  spinlock: Add missing __raw_spin_lock_flags() stub for UP
  mutex: add atomic_dec_and_mutex_lock(), fix
  locking, rtmutex.c: Documentation cleanup
  mutex: add atomic_dec_and_mutex_lock()
2009-06-10 16:19:40 -07:00
Linus Torvalds
75063600fd Merge branch 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: fix restart in wait_requeue_pi
  futex: fix restart for early wakeup in futex_wait_requeue_pi()
  futex: cleanup error exit
  futex: remove the wait queue
  futex: add requeue-pi documentation
  futex: remove FUTEX_REQUEUE_PI (non CMP)
  futex: fix futex_wait_setup key handling
  sparc64: extend TI_RESTART_BLOCK space by 8 bytes
  futex: fixup unlocked requeue pi case
  futex: add requeue_pi functionality
  futex: split out futex value validation code
  futex: distangle futex_requeue()
  futex: add FUTEX_HAS_TIMEOUT flag to restart.futex.flags
  rt_mutex: add proxy lock routines
  futex: split out fixup owner logic from futex_lock_pi()
  futex: split out atomic logic from futex_lock_pi()
  futex: add helper to find the top prio waiter of a futex
  futex: separate futex_wait_queue_me() logic from futex_wait()
2009-06-10 16:16:48 -07:00
Linus Torvalds
be15f9d63b Merge branch 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
  xen: cache cr0 value to avoid trap'n'emulate for read_cr0
  xen/x86-64: clean up warnings about IST-using traps
  xen/x86-64: fix breakpoints and hardware watchpoints
  xen: reserve Xen start_info rather than e820 reserving
  xen: add FIX_TEXT_POKE to fixmap
  lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
  xen: honour VCPU availability on boot
  xen: add "capabilities" file
  xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
  xen/sys/hypervisor: change writable_pt to features
  xen: add /sys/hypervisor support
  xen/xenbus: export xenbus_dev_changed
  xen: use device model for suspending xenbus devices
  xen: remove suspend_cancel hook
  xen/dev-evtchn: clean up locking in evtchn
  xen: export ioctl headers to userspace
  xen: add /dev/xen/evtchn driver
  xen: add irq_from_evtchn
  xen: clean up gate trap/interrupt constants
  xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
  ...
2009-06-10 16:16:27 -07:00
Linus Torvalds
082b63ae45 Merge branch 'sched-docs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-docs-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Document memory barriers implied by sleep/wake-up primitives
2009-06-10 15:48:53 -07:00
Linus Torvalds
99e97b860e Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: fix typo in sched-rt-group.txt file
  ftrace: fix typo about map of kernel priority in ftrace.txt file.
  sched: properly define the sched_group::cpumask and sched_domain::span fields
  sched, timers: cleanup avenrun users
  sched, timers: move calc_load() to scheduler
  sched: Don't export sched_mc_power_savings on multi-socket single core system
  sched: emit thread info flags with stack trace
  sched: rt: document the risk of small values in the bandwidth settings
  sched: Replace first_cpu() with cpumask_first() in ILB nomination code
  sched: remove extra call overhead for schedule()
  sched: use group_first_cpu() instead of cpumask_first(sched_group_cpus())
  wait: don't use __wake_up_common()
  sched: Nominate a power-efficient ilb in select_nohz_balancer()
  sched: Nominate idle load balancer from a semi-idle package.
  sched: remove redundant hierarchy walk in check_preempt_wakeup
2009-06-10 15:32:59 -07:00
Linus Torvalds
82782ca77d Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (46 commits)
  x86, boot: add new generated files to the appropriate .gitignore files
  x86, boot: correct the calculation of ZO_INIT_SIZE
  x86-64: align __PHYSICAL_START, remove __KERNEL_ALIGN
  x86, boot: correct sanity checks in boot/compressed/misc.c
  x86: add extension fields for bootloader type and version
  x86, defconfig: update kernel position parameters
  x86, defconfig: update to current, no material changes
  x86: make CONFIG_RELOCATABLE the default
  x86: default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN to 16 MB
  x86: document new bzImage fields
  x86, boot: make kernel_alignment adjustable; new bzImage fields
  x86, boot: remove dead code from boot/compressed/head_*.S
  x86, boot: use LOAD_PHYSICAL_ADDR on 64 bits
  x86, boot: make symbols from the main vmlinux available
  x86, boot: determine compressed code offset at compile time
  x86, boot: use appropriate rep string for move and clear
  x86, boot: zero EFLAGS on 32 bits
  x86, boot: set up the decompression stack as early as possible
  x86, boot: straighten out ranges to copy/zero in compressed/head*.S
  x86, boot: stylistic cleanups for boot/compressed/head_64.S
  ...

Fixed trivial conflict in arch/x86/configs/x86_64_defconfig manually
2009-06-10 15:30:41 -07:00
Linus Torvalds
f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Peter Zijlstra
bd2b5b1284 perf_counter: More aggressive frequency adjustment
Also employ the overflow handler to adjust the frequency, this results
in a stable frequency in about 40~50 samples, instead of that many ticks.

This also means we can start sampling at a sample period of 1 without
running head-first into the throttle.

It relies on sched_clock() to accurately measure the time difference
between the overflow NMIs.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-10 16:55:26 +02:00
Steven Rostedt
110bf2b764 tracing: add protection around module events unload
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 17:29:07 -04:00
Manish Katiyar
ad6ccfad6f kernel/kallsyms.c: replace deprecated __initcall with device_initcall and fix whitespace
Fix coding style whitespace issues and replace __initcall with
device_initcall.  Fixed multi-line comments as per coding style.

Errors as reported by checkpatch.pl :-
Before:
total: 14 errors, 14 warnings, 487 lines checked
After :
total: 0 errors, 8 warnings, 507 lines checked

Compile tested binary verified as :-
Before:
 text    data     bss     dec     hex filename
 2405       4       0    2409     969 kernel/kallsyms.o
After :
 text     data     bss     dec     hex filename
 2405       4       0    2409     969 kernel/kallsyms.o

Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:52 +02:00
Steven Rostedt
725c624a58 tracing: add trace_seq_vprint interface
The code to update the print formats for events requires a vprintf
format in the trace_seq. This patch adds that interface.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 15:17:32 -04:00
Li Zefan
55782138e4 tracing/events: convert block trace points to TRACE_EVENT()
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:34:23 -04:00
Steven Rostedt
f57a8a1911 ring-buffer: fix ret in rb_add_time_stamp
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.

[ Impact: fix compiler warning and real bug ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-09 12:33:30 -04:00
Yinghai Lu
eaa958402e cpumask: alloc zeroed cpumask for static cpumask_var_ts
These are defined as static cpumask_var_t so if MAXSMP is not used,
they are cleared already.  Avoid surprises when MAXSMP is enabled.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-09 22:30:27 +09:30
James Morris
0b4ec6e4e0 Merge branch 'master' into next 2009-06-09 09:27:53 +10:00
Peter Zijlstra
1f8a6a10fb ring-buffer: pass in lockdep class key for reader_lock
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
>  (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
>  (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
>  #0:  (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0

The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.

This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>

[ store key in ring buffer descriptor ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 18:50:20 -04:00
Linus Torvalds
3af968e066 async: Fix lack of boot-time console due to insufficient synchronization
Our async work synchronization was broken by "async: make sure
independent async domains can't accidentally entangle" (commit
d5a877e8dd), because it would report
the wrong lowest active async ID when there was both running and
pending async work.

This caused things like no being able to read the root filesystem,
resulting in missing console devices and inability to run 'init',
causing a boot-time panic.

This fixes it by properly returning the lowest pending async ID: if
there is any running async work, that will have a lower ID than any
pending work, and we should _not_ look at the pending work list.

There were alternative patches from Jaswinder and James, but this one
also cleans up the code by removing the pointless 'ret' variable and
the unnecesary testing for an empty list around 'for_each_entry()' (if
the list is empty, the for_each_entry() thing just won't execute).

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474
Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-08 12:31:53 -07:00
Artem Bityutskiy
8daa21e61b hrtimer: export ktime_add_safe
We want to use hrtimers in UBIFS (for write-buffer write-back timer).
We need the 'hrtimer_set_expires_range_ns()', which is an in-line
function which uses 'ktime_add_safe()'.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-08 11:14:58 +03:00
Ingo Molnar
8326f44da0 perf_counter: Implement generalized cache event types
Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.

This is a 3-dimensional space:

       { L1-D, L1-I, L2, ITLB, DTLB, BPU } x
       { load, store, prefetch } x
       { accesses, misses }

User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)

Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.

Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.

( x86 is supported for now, with the Nehalem event table filled in,
  and with Core2 and Atom having placeholder tables. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 13:14:47 +02:00
Ingo Molnar
a21ca2cac5 perf_counter: Separate out attr->type from attr->config
Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 11:37:22 +02:00
Peter Zijlstra
6a24ed6c60 perf_counter: Fix frequency adjustment for < HZ
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 18:07:48 +02:00
Peter Zijlstra
689802b2d0 perf_counter: Add PERF_SAMPLE_PERIOD
In order to allow easy tracking of the period, also provide means of
adding it to the sample data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 18:07:47 +02:00
Peter Zijlstra
ac4bcf8894 perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID
The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 18:07:47 +02:00
Ingo Molnar
918143e8b7 Merge branch 'tip/tracing/ftrace-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace 2009-06-05 16:50:29 +02:00
Peter Zijlstra
089dd79db9 perf_counter: Generate mmap events for install_special_mapping()
In order to track the vdso also generate mmap events for
install_special_mapping().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 14:46:41 +02:00
Paul Mackerras
6dc5f2a417 perf_counter: Fix lockup with interrupting counters
Commit 8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read.  The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero.  On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.

This fixes it by using atomic_long_read rather than atomic_read.

[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-05 08:22:26 +02:00
Oleg Nesterov
edaba2c533 ptrace: revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic"
Commit 95a3540da9 ("ptrace_detach: the wrong
wakeup breaks the ERESTARTxxx logic") removed the "extra"
wake_up_process() from ptrace_detach(), but as Jan pointed out this breaks
the compatibility.

I believe the changelog is right and this wake_up() is wrong in many
ways, but GDB assumes that ptrace(PTRACE_DETACH, child, 0, 0) always
wakes up the tracee.

Despite the fact this breaks SIGNAL_STOP_STOPPED/group_stop_count logic,
and despite the fact this wake_up_process() can break another
assumption: PTRACE_DETACH with SIGSTOP should leave the tracee in
TASK_STOPPED case.  Because the untraced child can dequeue SIGSTOP and
call do_signal_stop() before ptrace_detach() calls wake_up_process().

Revert this change for now.  We need some fixes even if we we want to keep
the current behaviour, but these fixes are not for 2.6.30.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04 18:07:40 -07:00
Oleg Nesterov
087eb43705 ptrace: tracehook_report_clone: fix false positives
The "trace || CLONE_PTRACE" check in tracehook_report_clone() is not right,

- If the untraced task does clone(CLONE_PTRACE) the new child is not traced,
  we must not queue SIGSTOP.

- If we forked the traced task, but the tracer exits and untraces both the
  forking task and the new child (after copy_process() drops tasklist_lock),
  we should not queue SIGSTOP too.

Change the code to check task_ptrace() != 0 instead. This is still racy, but
the race is harmless.

We can race with another tracer attaching to this child, or the tracer can
exit and detach in parallel. But giwen that we didn't do wake_up_new_task()
yet, the child must have the pending SIGSTOP anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-04 18:07:40 -07:00
Peter Zijlstra
d99e944620 perf_counter: Remove munmap stuff
In name of keeping it simple, only track mmap events. Userspace
will have to remove old overlapping maps when it encounters them.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-04 17:51:38 +02:00
Peter Zijlstra
60313ebed7 perf_counter: Add fork event
Create a fork event so that we can easily clone the comm and
dso maps without having to generate all those events.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-04 17:51:38 +02:00
Ingo Molnar
64edbc5620 Merge branch 'tracing/ftrace' into tracing/core
Merge reason: this mini-topic had outstanding problems that delayed
              its merge, so it does not fast-forward.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-04 13:59:40 +02:00
Christoph Lameter
e0a94c2a63 security: use mmap_min_addr indepedently of security models
This patch removes the dependency of mmap_min_addr on CONFIG_SECURITY.
It also sets a default mmap_min_addr of 4096.

mmapping of addresses below 4096 will only be possible for processes
with CAP_SYS_RAWIO.

Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Eric Paris <eparis@redhat.com>
Looks-ok-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-04 12:07:48 +10:00
Ingo Molnar
128f048f0f perf_counter: Fix throttling lock-up
Throttling logic is broken and we can lock up with too small
hw sampling intervals.

Make the throttling code more robust: disable counters even
if we already disabled them.

( Also clean up whitespace damage i noticed while reading
  various pieces of code related to throttling. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-03 23:39:51 +02:00
Steven Rostedt
563af16c30 tracing: add annotation to what type of stack trace is recorded
The current method of printing out a stack trace is to add a new line
and print out the trace:

    yum-updatesd-3120  [002]   573.691303:
 => do_softirq
 => irq_exit
 => smp_apic_timer_interrupt
 => apic_timer_interrupt

This looks a bit awkward, and if we have both stack and user stack traces
running, it would be nice to have a title to tell them apart, although
it is easy to tell by the output.

This patch adds an annotation to the start of the stack traces:

            init-1     [003]   929.304979: <stack trace>
 => user_path_at
 => vfs_fstatat
 => vfs_stat
 => sys_newstat
 => system_call_fastpath

             cat-3459  [002]  1016.824040: <user stack trace>
 =>  <0000003aae6c0250>
 =>  <00007ffff4b06ae4>
 =>  <69636172742f6775>

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 11:10:44 -04:00
Steven Whitehouse
56d8bd3f0b tracing: fix multiple use of __print_flags and __print_symbolic
Here is an updated patch to include the extra call to
trace_seq_init() as requested. This is vs. the latest
-tip tree and fixes the use of multiple __print_flags
and __print_symbolic in a single tracer. Also tested
to ensure its working now:

mount.gfs2-2534  [000]   235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR
mount.gfs2-2534  [000]   235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI
mount.gfs2-2534  [000]   235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX
glock_workqueue-2529  [000]   235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI
glock_workqueue-2529  [000]   235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:29:48 -04:00
walimis
048dc50c5e tracing/events: fix output format of user stack
According to "events/ftrace/user_stack/format", fix the output of
user stack.

before fix:

  sh-1073  [000]    31.137561:  <b7f274fe> <-  <0804e33c> <-  <080835c1>

after fix:

  sh-1072  [000]    37.039329:
 =>  <b7f8a4fe>
 =>  <0804e33c>
 =>  <080835c1>

Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:25:30 -04:00
walimis
f11b3f4e29 tracing/events: fix output format of kernel stack
According to "events/ftrace/kernel_stack/format", output format of
kernel stack should use "=>" instead of "<=".

The second problem is that we shouldn't skip the first entry in the stack,
although it seems to be duplicated when used in the "function" tracer,
but events also use it. If we skip the first one, we will drop the topmost
entry of the stack.

The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should
drop it, otherwise it will print a NULL name line.

before fix:

      sh-1072  [000]   26.957239: sched_process_fork: parent sh:1072 child sh:1073
      sh-1072  [000]   26.957262:
 <= syscall_call
 <=
      sh-1072  [000]   26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120]
      sh-1072  [000]   26.957752:
 <= preempt_schedule
 <= wake_up_new_task
 <= do_fork
 <= sys_clone
 <= syscall_call
 <=

After fix:

      sh-1075  [000]    39.791848: sched_process_fork: parent sh:1075  child sh:1076
      sh-1075  [000]    39.791871:
 => sys_clone
 => syscall_call
      sh-1075  [000]    39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120]
      sh-1075  [000]    39.792722:
 => schedule
 => preempt_schedule
 => wake_up_new_task
 => do_fork
 => sys_clone
 => syscall_call

Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-2-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:25:15 -04:00
walimis
083a63b48e tracing/trace_stack: fix the number of entries in the header
The last entry in the stack_dump_trace is ULONG_MAX, which is not
a valid entry, but max_stack_trace.nr_entries has accounted for it.
So when printing the header, we should decrease it by one.
Before fix, print as following, for example:

	Depth    Size   Location    (53 entries)	<--- should be 52
	-----    ----   --------
  0)     3264     108   update_wall_time+0x4d5/0x9a0
  ...
 51)       80      80   syscall_call+0x7/0xb
 ^^^
   it's correct.

Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-1-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:24:44 -04:00
Steven Rostedt
ea05b57cc1 ring-buffer: discard timestamps that are at the start of the buffer
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.

If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.

This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.

This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.

[ Impact: prevent time stamps from filling ring buffer ]

Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:15:25 -04:00
Steven Rostedt
edd813bffc ring-buffer: try to discard unneeded timestamps
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.

Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:15:22 -04:00
Tim Bird
a202355640 ring-buffer: fix bug in ring_buffer_discard_commit
There's a bug in ring_buffer_discard_commit.  The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).

I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer.  All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.

Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace.  Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():

again:
	...
	if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
		return NULL;

I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.

Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter().  I haven't
tracked that one down yet.

In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.

Here's the patch for the simple fix:

Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.

Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 10:15:06 -04:00
Peter Zijlstra
a96bbc1641 perf_counter: Fix race in counter initialization
We need the PID namespace and counter ID available when the
counter overflows and we need to generate a sample event.

[ Impact: fix kernel crash with high-frequency sampling ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
[ fixed a further crash and cleaned up the initialization a bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-03 14:57:03 +02:00
Peter Zijlstra
226f62fdd5 perf_counter: Add a comm hook for pure fork()s
I noticed missing COMM events and found that we missed
reporting them for pure forks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-03 14:14:30 +02:00
Steven Rostedt
84047e360a function-graph: always initialize task ret_stack
On creating a new task while running the function graph tracer, if
we fail to allocate the ret_stack, and then fail the fork, the
code will free the parent ret_stack. This is because the child
duplicated the parent and currently points to the parent's ret_stack.

This patch always initializes the task's ret_stack to NULL.

[ Impact: prevent crash of parent on low memory during fork ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 16:51:55 -04:00
Steven Rostedt
f7e8b616ed function-graph: move initialization of new tasks up in fork
When the function graph tracer is enabled, all new tasks must allocate
a ret_stack to place the return address of functions. This is because
the function graph tracer will replace the real return address with a
call to the tracing of the exit function.

This initialization happens in fork, but it happens too late. If fork
fails, then it will call free_task and that calls the freeing of this
ret_stack. But before initialization happens, the new (failed) task
points to its parents ret_stack. If a fork failure happens during
the function trace, it would be catastrophic for the parent.

Also, there's no need to call ftrace_graph_exit_task from fork, since
it is called by free_task which fork calls on failure.

[ Impact: prevent crash during failed fork running function graph tracer ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 16:49:57 -04:00
Peter Zijlstra
0d48696f87 perf_counter: Rename perf_counter_hw_event => perf_counter_attr
The structure isn't hw only and when I read event, I think about those
things that fall out the other end. Rename the thing.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 21:45:33 +02:00
Peter Zijlstra
08247e31ca perf_counter: Add ioctl for changing the sample period/frequency
Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 21:45:32 +02:00
Peter Zijlstra
8e3747c13c perf_counter: Change data head from u32 to u64
Since some people worried that 4G might not be a large enough
as an mmap data window, extend it to 64 bit for capable
platforms.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 21:45:32 +02:00
Peter Zijlstra
b23f3325ed perf_counter: Rename various fields
A few renames:

  s/irq_period/sample_period/
  s/irq_freq/sample_freq/
  s/PERF_RECORD_/PERF_SAMPLE_/
  s/record_type/sample_type/

And change both the new sample_type and read_format to u64.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 21:45:30 +02:00
Peter Zijlstra
8e5799b1ad perf_counter: Add unique counter id
Stephan raised the issue that we currently cannot distinguish between
similar counters within a group (PERF_RECORD_GROUP uses the config
value as identifier).

Therefore, generate a new ID for each counter using a global u64
sequence counter.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 21:45:29 +02:00
Steven Rostedt
26c01624a2 function-graph: add memory barriers for accessing task's ret_stack
The code that handles the tasks ret_stack allocation for every task
assumes that only an interrupt can cause issues (even though interrupts
are disabled).

In reality, the code is allocating the ret_stack for tasks that may be
running on other CPUs and there are not efficient memory barriers to
handle this case.

[ Impact: prevent crash due to using of uninitialized ret_stack variables ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 14:42:17 -04:00
Steven Rostedt
82310a3272 function-graph: enable the stack after initialization of other variables
The function graph tracer checks if the task_struct has ret_stack defined
to know if it is OK or not to use it. The initialization is done for
all tasks by one process, but the idle tasks use the same initialization
used by new tasks.

If an interrupt happens on an idle task that just had the ret_stack
created, but before the rest of the initialization took place, then
we can corrupt the return address of the functions.

This patch moves the setting of the task_struct's ret_stack to after
the other variables have been initialized.

[ Impact: prevent kernel panic on idle task when starting function graph ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 14:41:50 -04:00
Steven Rostedt
179c498ae2 function-graph: only allocate init tasks if it was not already done
When the function graph tracer is enabled, it calls the initialization
needed for the init tasks that would be called on all created tasks.

The problem is that this is called every time the function graph tracer
is enabled, and the ret_stack is allocated for the idle tasks each time.
Thus, the old ret_stack is lost and a memory leak is created.

This is also dangerous because if an interrupt happened on another CPU
with the init task and the ret_stack is replaced, we then lose all the
return pointers for the interrupt, and a crash would take place.

[ Impact: fix memory leak and possible crash due to race ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-02 12:03:19 -04:00
Peter Zijlstra
709e50cf87 perf_counter: Use PID namespaces properly
Stop using task_struct::pid and start using PID namespaces.

PIDs will be reported in the PID namespace of the monitoring
task at the moment of counter creation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 16:16:25 +02:00
Paul Mackerras
bf4e0ed3d0 perf_counter: Remove unused prev_state field
This removes the prev_state field of struct perf_counter since
it is now unused.  It was only used by the cpu migration
counter, which doesn't use it any more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35052.915728.626374@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 13:10:55 +02:00
Paul Mackerras
3f731ca60a perf_counter: Fix cpu migration counter
This fixes the cpu migration software counter to count
correctly even when contexts get swapped from one task to
another.  Previously the cpu migration counts reported by perf
stat were bogus, ranging from negative to several thousand for
a single "lat_ctx 2 8 32" run.  With this patch the cpu
migration count reported for "lat_ctx 2 8 32" is almost always
between 35 and 44.

This fixes the problem by adding a call into the perf_counter
code from set_task_cpu when tasks are migrated.  This enables
us to use the generic swcounter code (with some modifications)
for the cpu migration counter.

This modifies the swcounter code to allow a NULL regs pointer
to be passed in to perf_swcounter_ctx_event() etc.  The cpu
migration counter does this because there isn't necessarily a
pt_regs struct for the task available.  In this case, the
counter will not have interrupt capability - but the migration
counter didn't have interrupt capability before, so this is no
loss.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35006.819769.416327@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 13:10:54 +02:00
Paul Mackerras
f38b082081 perf_counter: Initialize per-cpu context earlier on cpu up
This arranges for perf_counter's notifier for cpu hotplug
operations to be called earlier than the migration notifier in
sched.c by increasing its priority to 20, compared to the 10
for the migration notifier.  The reason for doing this is that
a subsequent commit to convert the cpu migration counter to use
the generic swcounter infrastructure will add a call into the
perf_counter subsystem when tasks get migrated.  Therefore the
perf_counter subsystem needs a chance to initialize its per-cpu
data for the new cpu before it can get called from the
migration code.

This also adds a comment to the migration notifier noting that
its priority needs to be lower than that of the perf_counter
notifier.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18981.1900.792795.836858@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-02 13:10:54 +02:00
Steven Rostedt
0f6ce3de4e ftrace: do not profile functions when disabled
A race was found that if one were to enable and disable the function
profiler repeatedly, then the system can panic. This was because a profiled
function may be preempted just before disabling interrupts. While
the profiler is disabled and then reenabled, the preempted function
could start again, and access the hash as it is being initialized.

This just adds a check in the irq disabled part to check if the profiler
is enabled, and if it is not then it will just exit.

When the system is disabled, the profile_enabled variable is cleared
before calling the unregistering of the function profiler. This
unregistering calls stop machine which also acts as a synchronize schedule.

[ Impact: fix panic in enabling/disabling function profiler ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:26:23 -04:00
Steven Rostedt
112f38a7e3 tracing: make trace pipe recognize latency format flag
The trace_pipe did not recognize the latency format flag and would produce
different output than the trace file. The problem was partly due that
the trace flags in the iterator was not set as well as the trace_pipe
zeros out part of the iterator (including the flags) to be able to use
the same routines as the trace file. trace_flags of the iterator should
not cause any problems when not zeroed out by for trace_pipe.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:26:02 -04:00
Steven Whitehouse
ec081ddc3d tracing: add exports to use __print_symbolic and __print_flags from a module
A patch to allow the use of __print_symbolic and __print_flags
from a module. This allows the current GFS2 tracing patch to
build.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1243868015.29604.542.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:25:29 -04:00
Li Zefan
7fcb7c472f tracing/events: introduce __dynamic_array()
__string() is limited:

  - it's a char array, but we may want to define array with other types
  - a source string should be available, but we may just know the string size

We introduce __dynamic_array() to break those limitations, and __string()
becomes a wrapper of it. As a side effect, now __get_str() can be used
in TP_fast_assign but not only TP_print.

Take XFS for example, we have the string length in the dirent, but the
string itself is not NULL-terminated, so __dynamic_array() can be used:

TRACE_EVENT(xfs_dir2,
	TP_PROTO(struct xfs_da_args *args),
	TP_ARGS(args),

	TP_STRUCT__entry(
		__field(int, namelen)
		__dynamic_array(char, name, args->namelen + 1)
		...
	),

	TP_fast_assign(
		char *name = __get_str(name);

		if (args->namelen)
			memcpy(name, args->name, args->namelen);
		name[args->namelen] = '\0';

		__entry->namelen = args->namelen;
	),

	TP_printk("name %.*s namelen %d",
		  __entry->namelen ? __get_str(name) : NULL
		  __entry->namelen)
);

[ Impact: allow defining dynamic size arrays ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2384D2.3080403@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:25:15 -04:00
Steven Rostedt
897f17a653 tracing: combine the default tracers into one config
Both event tracer and sched switch plugin are selected by default
by all generic tracers. But if no generic tracer is enabled, their options
appear. But ether one of them will select the other, thus it only
makes sense to have the default tracers be selected by one option.

[ Impact: clean up kconfig menu ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:23:55 -04:00
Steven Rostedt
5e0a093910 tracing: fix config options to not show when automatically selected
There are two options that are selected by all tracers, but we want
to have those options available when no tracer is selected. These are

 The event tracer and sched switch tracer.

The are enabled by all tracers, but if a tracer is not selected we want
the options to appear. All tracers including them select TRACING.
Thus what we would like to do is:

  config EVENT_TRACER
	bool "prompt"
	depends on TRACING
	select TRACING

But that gives us a bug in the kbuild system since we just created a
circular dependency. We only want the prompt to show when TRACING is off.

This patch adds GENERIC_TRACER that all tracers will select instead of
TRACING. The two options (sched switch and event tracer) will select
TRACING directly and depend on !GENERIC_TRACER. This solves the cicular
dependency.

[ Impact: hide options that are selected by default ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:23:30 -04:00
Steven Rostedt
2af15d6a44 ftrace: add kernel command line function filtering
When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.

This patch adds two new ftrace command line commands.

  ftrace_notrace=function-list
  ftrace_filter=function-list

Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.

These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.

The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.

	ftrace_notrace=rcu*,*lock,*spin*

Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.

Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-01 23:23:10 -04:00
Frederic Weisbecker
43bd123623 tracing/stat: remove unappropriate safe walk on list
register_stat_tracer() uses list_for_each_entry_safe
to check whether a tracer is already present in the list.
But we don't delete anything from the list here, so
we don't need the safe version

[ Impact: cleanup list use is stat tracing ]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:18:33 +02:00
Li Zefan
dbd3fbdfee tracing/stat: do some cleanups
- remove duplicate code in stat_seq_init()
- update comments to reflect the change from stat list to stat rbtree

[ Impact: clean up ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:18:18 +02:00
Li Zefan
e162280690 tracing/stat: remember to free root node
When closing a trace_stat file, we destroy the rbtree constructed during
file open, but there is memory leak that the root node is not freed.

[ Impact: fix memory leak when closing a trace_stat file ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:18:03 +02:00
Li Zefan
b3dd7ba7d8 tracing/stat: change dummpy_cmp() to return -1
Currently the output of trace_stat/workqueues is totally reversed:

 # cat /debug/tracing/trace_stat/workqueues
    ...
    1       17       17      210       37   `-blk_unplug_work+0x0/0x57
    1     3779     3779      181       11   |-cfq_kick_queue+0x0/0x2f
    1     3796     3796                     kblockd/1:120
    ...

The correct output should be:

    1     3796     3796                     kblockd/1:120
    1     3779     3779      181       11   |-cfq_kick_queue+0x0/0x2f
    1       17       17      210       37   `-blk_unplug_work+0x0/0x57

It's caused by "tracing/stat: replace linked list by an rbtree for
sorting"
(53059c9b67a62a3dc8c80204d3da42b9267ea5a0).

dummpy_cmp() should return -1, so rb_node will always be inserted as
right-most node in the rbtree, thus we sort the output in ascending
order.

[ Impact: fix the output of trace_stat/workqueues ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:17:49 +02:00
Frederic Weisbecker
8f184f2730 tracing/stat: replace linked list by an rbtree for sorting
When the stat tracing framework prepares the entries from a tracer
to output them to the user, it starts by computing a linear sort
through a linked list to give the entries ordered by relevance
to the user.

This is quite ugly and causes a small latency when we begin to
read the file.

This patch changes that by turning the linked list into a red-black
tree. Athough the whole iteration using the start and next tracer
callbacks while opening the file remain the same, it is now much
more fast and scalable.

The rbtree guarantees O(log(n)) insertions whereas a linked
list with linear sorting brought us a O(n) despair. Now the
(visible) latency has disapeared.

[ Impact: kill the latency while starting to read a stat tracer file ]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:17:35 +02:00
Frederic Weisbecker
0d64f8342d tracing/stat: replace trace_stat_session by stat_session
The "trace" prefix in struct trace_stat_session type is annoying while
reading the trace_stat.c file. It makes the lines longer, and
is not that much useful to explain the sense of this type.

Just keep "struct stat_session" for this type.

[ Impact: make the code a bit more readable ]

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:17:17 +02:00
Zhaolei
f3c4ae26e9 trace_workqueue: remove blank line between each cpu
The blankline between each cpu's workqueue stat is not necessary, because
the cpu number is enough to part them by eye.
Old style also caused a blankline below headline, and made code complex
by using lock, disableirq and get cpu var.

Old style:
 # CPU  INSERTED  EXECUTED   NAME
 # |      |         |          |

   0   8644       8644       events/0
   0      0          0       cpuset
   ...
   0      1          1       kdmflush

   1  35365      35365       events/1
   ...

New style:
 # CPU  INSERTED  EXECUTED   NAME
 # |      |         |          |

   0   8644       8644       events/0
   0      0          0       cpuset
   ...
   0      1          1       kdmflush
   1  35365      35365       events/1
   ...

[ Impact: provide more readable code ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:14:26 +02:00
Zhaolei
b8867164f0 trace_workqueue: remove cpu_workqueue_stats->first_entry
cpu_workqueue_stats->first_entry is useless because we can retrieve the
header of a cpu workqueue using:
if (&cpu_workqueue_stats->list == workqueue_cpu_stat(cpu)->list.next)

[ Impact: cleanup ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:13:46 +02:00
Zhaolei
1fdfca9c57 trace_workqueue: use list_for_each_entry() instead of list_for_each_entry_safe()
No need to use list_for_each_entry_safe() in iteration without deleting
any node, we can use list_for_each_entry() instead.

[ Impact: cleanup ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:13:05 +02:00
Zhaolei
fb39125fd7 ftrace, workqueuetrace: make workqueue tracepoints use TRACE_EVENT macro
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
    introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
    the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro

TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions

Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.

[ Impact: expand workqueue tracer to events tracing ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-06-02 01:10:40 +02:00
H. Peter Anvin
48b1fddbb1 Merge branch 'irq/numa' into x86/mce3
Merge reason: arch/x86/kernel/irqinit_{32,64}.c unified in irq/numa
and modified in x86/mce3; this merge resolves the conflict.

Conflicts:
	arch/x86/kernel/irqinit.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-06-01 15:25:31 -07:00
Ingo Molnar
3d58f48ba0 Merge branch 'linus' into irq/numa
Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 21:06:21 +02:00
Ingo Molnar
22a4f650d6 perf_counter: Tidy up style details
- whitespace fixlets
 - make local variable definitions more consistent

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 19:55:32 +02:00
Paul Mackerras
880ca15adf perf_counter: Allow software counters to count while task is not running
This changes perf_swcounter_match() so that per-task software
counters can count events that occur while their associated
task is not running.  This will allow us to use the generic
software counter code for counting task migrations, which can
occur while the task is not scheduled in.

To do this, we have to distinguish between the situations where
the counter is inactive because its task has been scheduled
out, and those where the counter is inactive because it is part
of a group that was not able to go on the PMU.  In the former
case we want the counter to count, but not in the latter case.
If the context is active, we have the latter case.  If the
context is inactive then we need to know whether the counter
was counting when the context was last active, which we can
determine by comparing its ->tstamp_stopped timestamp with the
context's timestamp.

This also folds three checks in perf_swcounter_match, checking
perf_event_raw(), perf_event_type() and perf_event_id()
individually, into a single 64-bit comparison on
counter->hw_event.config, as an optimization.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34810.259718.955621@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 10:04:06 +02:00
Paul Mackerras
25346b93ca perf_counter: Provide functions for locking and pinning the context for a task
This abstracts out the code for locking the context associated
with a task.  Because the context might get transferred from
one task to another concurrently, we have to check after
locking the context that it is still the right context for the
task and retry if not.  This was open-coded in
find_get_context() and perf_counter_init_task().

This adds a further function for pinning the context for a
task, i.e. marking it so it can't be transferred to another
task.  This adds a 'pin_count' field to struct
perf_counter_context to indicate that a context is pinned,
instead of the previous method of setting the parent_gen count
to all 1s.  Pinning the context with a pin_count is easier to
undo and doesn't require saving the parent_gen value.  This
also adds a perf_unpin_context() to undo the effect of
perf_pin_task_context() and changes perf_counter_init_task to
use it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34748.755674.596386@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 10:04:05 +02:00
Ingo Molnar
23db9f430b Merge branch 'linus' into perfcounters/core
Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 10:01:39 +02:00
Peter Zijlstra
bbbee90829 perf_counter: Ammend cleanup in fork() fail
When fork() fails we cannot use perf_counter_exit_task() since that
assumes to operate on current. Write a new helper that cleans up
unused/clean contexts.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:52 +02:00
Peter Zijlstra
665c2142a9 perf_counter: Clean up task_ctx vs interrupts
Remove the local_irq_save() etc.. in routines that are smp function
calls, or have IRQs disabled by other means.

Then change the COMM, MMAP, and swcounter context iteration to
current->perf_counter_ctxp and RCU, since it really doesn't matter
which context they iterate, they're all folded.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:51 +02:00
Peter Zijlstra
efb3d17240 perf_counter: Fix COMM and MMAP events for cpu wide counters
Commit a63eaf34ae ("perf_counter: Dynamically allocate tasks'
perf_counter_context struct") broke COMM and MMAP notification for
cpu wide counters by dropping out early if there was no task context,
thereby also not iterating the cpu context.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 16:21:51 +02:00
Ingo Molnar
012b84dae1 perf_counter: Robustify counter-free logic
This fixes a nasty crash and highlights a bug that we were
freeing failed-fork() counters incorrectly.

(the fix for that will come separately)

[ Impact: fix crashes/lockups with inherited counters ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 14:28:37 +02:00
Ingo Molnar
3f4dee2273 perf_counter: Fix cpuctx->task_ctx races
Peter noticed that we are sometimes reading cpuctx->task_ctx with
interrupts enabled.

Noticed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 14:28:36 +02:00
Paul Mackerras
ad3a37de81 perf_counter: Don't swap contexts containing locked mutex
Peter Zijlstra pointed out that under some circumstances, we can take
the mutex in a context or a counter and then swap that context or
counter to another task, potentially leading to lock order inversions
or the mutexes not protecting what they are supposed to protect.

This fixes the problem by making sure that we never take a mutex in a
context or counter which could get swapped to another task.  Most of
the cases where we take a mutex is on a top-level counter or context,
i.e. a counter which has an fd associated with it or a context that
contains such a counter.  This adds WARN_ON_ONCE statements to verify
that.

The two cases where we need to take the mutex on a context that is a
clone of another are in perf_counter_exit_task and
perf_counter_init_task.  The perf_counter_exit_task case is solved by
uncloning the context before starting to remove the counters from it.
The perf_counter_init_task is a little trickier; we temporarily
disable context swapping for the parent (forking) task by setting its
ctx->parent_gen to the all-1s value after locking the context, if it
is a cloned context, and restore the ctx->parent_gen value at the end
if the context didn't get uncloned in the meantime.

This also moves the increment of the context generation count to be
within the same critical section, protected by the context mutex, that
adds the new counter to the context.  That way, taking the mutex is
sufficient to ensure that both the counter list and the generation
count are stable.

[ Impact: fix hangs, races with inherited and PID counters ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18975.31580.520676.619896@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 11:02:46 +02:00
Andi Kleen
a9862e0560 Export add_timer_on for modules
Needed in followon patch.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-28 09:24:13 -07:00
Paul Mackerras
c93f766909 perf_counter: Fix race in attaching counters to tasks and exiting
Commit 564c2b21 ("perf_counter: Optimize context switch between
identical inherited contexts") introduced a race where it is possible
that a counter being attached to a task could get attached to the
wrong task, if the task is one that has inherited its context from
another task via fork.  This happens because the optimized context
switch could switch the context to another task after find_get_context
has read task->perf_counter_ctxp.  In fact, it's possible that the
context could then get freed, if the other task then exits.

This fixes the problem by protecting both the context switch and the
critical code in find_get_context with spinlocks.  The context switch
locks the cxt->lock of both the outgoing and incoming contexts before
swapping them.  That means that once code such as find_get_context
has obtained the spinlock for the context associated with a task,
the context can't get swapped to another task.  However, the context
may have been swapped in the interval between reading
task->perf_counter_ctxp and getting the lock, so it is necessary to
check and retry.

To make sure that none of the contexts being looked at in
find_get_context can get freed, this changes the context freeing code
to use RCU.  Thus an rcu_read_lock() is sufficient to ensure that no
contexts can get freed.  This part of the patch is lifted from a patch
posted by Peter Zijlstra.

This also adds a check to make sure that we can't add a counter to a
task that is exiting.

There is also a race between perf_counter_exit_task and
find_get_context; this solves the race by moving the get_ctx that
was in perf_counter_alloc into the locked region in find_get_context,
so that once find_get_context has got the context for a task, it
won't get freed even if the task calls perf_counter_exit_task.  It
doesn't matter if new top-level (non-inherited) counters get attached
to the context after perf_counter_exit_task has detached the context
from the task.  They will just stay there and never get scheduled in
until the counters' fds get closed, and then perf_release will remove
them from the context and eventually free the context.

With this, we are now doing the unclone in find_get_context rather
than when a counter was added to or removed from a context (actually,
we were missing the unclone_ctx() call when adding a counter to a
context).  We don't need to unclone when removing a counter from a
context because we have no way to remove a counter from a cloned
context.

This also takes out the smp_wmb() in find_get_context, which Peter
Zijlstra pointed out was unnecessary because the cmpxchg implies a
full barrier anyway.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-28 15:03:50 +02:00
Heiko Carstens
5b6045a906 trace: disable preemption before taking raw spinlocks
s390 code uses smp_processor_id() in __raw_spin_lock() code which
reveals that a (raw) spinlock is taken without preemption disabled.
This can potentially deadlock.

To fix this explicitly disable and enable preemption.

BUG: using smp_processor_id() in preemptible [00000000] code: cat/2278
caller is trace_find_cmdline+0x40/0xfc
CPU: 0 Not tainted 2.6.30-rc7-dirty #39
Process cat (pid: 2278, task: 000000003faedb68, ksp: 000000003b33b988)
000000003b33b988 000000003b33bae0 0000000000000002 0000000000000000
       000000003b33bb80 000000003b33baf8 000000003b33baf8 00000000000175d6
       0000000000000001 000000003b33b988 000000003f9b0000 000000000000000b
       000000000000000c 000000003b33bb40 000000003b33bae0 0000000000000000
       0000000000000000 00000000000175d6 000000003b33bae0 000000003b33bb28
Call Trace:
([<00000000000174b2>] show_trace+0x112/0x170)
 [<0000000000017582>] show_stack+0x72/0x100
 [<0000000000441538>] dump_stack+0xc8/0xd8
 [<000000000025c350>] debug_smp_processor_id+0x114/0x130
 [<00000000000bf0e4>] trace_find_cmdline+0x40/0xfc
 [<00000000000c35d4>] trace_print_context+0x58/0xac
 [<00000000000bb676>] print_trace_line+0x416/0x470
 [<00000000000bc8fe>] s_show+0x4e/0x428
 [<000000000013834e>] seq_read+0x36a/0x5d4
 [<0000000000112a78>] vfs_read+0xc8/0x174
 [<0000000000112c58>] SyS_read+0x74/0xc4
 [<000000000002c7ae>] sysc_noemu+0x10/0x16
 [<000002000012436c>] 0x2000012436c
1 lock held by cat/2278:
 #0:  (&p->lock){+.+.+.}, at: [<0000000000138056>] seq_read+0x72/0x5d4

[ Impact: fix preempt-unsafe raw spinlock ]

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-28 01:21:03 +02:00
Eero Nurkkala
f2e21c9610 NOHZ: Properly feed cpufreq ondemand governor
A call from irq_exit() may occasionally pause the timing
info for cpufreq ondemand governor. This results in the
cpufreq ondemand governor to fail to calculate the 
system load properly. Thus, relocate the checks for this
particular case to keep the governor always functional.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Reported-by: Tero Kristo <tero.kristo@nokia.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-27 15:33:43 +02:00
Tetsuo Handa
ab2b7ebaad kmod: Release sub_info on cred allocation failure.
call_usermodehelper_setup() forgot to kfree(sub_info)
when prepare_usermodehelper_creds() failed.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-26 12:11:19 -07:00
Steven Rostedt
0f4fc29dd6 tracing: add __print_symbolic to trace events
This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.

[ Impact: add interface for showing symbol names in events ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26 20:31:50 +02:00
Steven Rostedt
be74b73a57 tracing: add __print_flags for events
Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.

Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.

Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.

[
  v2 changes include:

  Frederic Weisbecker's idea of using a mask instead of bits,
  thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.

  Li Zefan's idea of allowing the caller of __print_flags to add their
  own delimiter (or no delimiter) where we can get for file permissions
  rwx instead of r|w|x.
]

[
  v3 changes:

   Christoph Hellwig's idea of using an array instead of va_args.
]

[ Impact: better displaying of flags in trace output ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26 20:25:22 +02:00
Ingo Molnar
329d876d6f perf_counter: Initialize ->oncpu properly
This shouldnt matter normally (and i have not seen any
misbehavior), because active counters always have a
proper ->oncpu value - but nevertheless initialize the
field properly to -1.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-26 09:54:13 +02:00
Zhaolei
0e907c9939 ftrace: clean up of using ftrace_event_enable_disable()
Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.

[ Impact: factorize and cleanup event tracing code ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26 03:30:31 +02:00
Zhaolei
b11c53e12f ftrace: Add task_comm support for trace_event
If we enable a trace event alone without any tracer running (such as
function tracer, sched switch tracer, etc...) it can't output enough
task command information.

We need to use the tracing_{start/stop}_cmdline_record() helpers
which are designed to keep track of cmdlines for any tasks that
were scheduled during the tracing.

Before this patch:
 # echo 1 > debugfs/tracing/events/sched/sched_switch/enable
 # cat debugfs/tracing/trace
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
            <...>-2289  [000] 526276.724790: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.725231: sched_switch: task sshd:2287 [120] ==> bash:2289 [120]
            <...>-2289  [000] 526276.725452: sched_switch: task bash:2289 [120] ==> sshd:2287 [120]
            <...>-2287  [000] 526276.727181: sched_switch: task sshd:2287 [120] ==> swapper:0 [140]
           <idle>-0     [000] 526277.032734: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
            <...>-5     [000] 526277.032782: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

After this patch:
 # tracer: nop
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
             bash-2269  [000] 527347.989229: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.990960: sched_switch: task sshd:2267 [120] ==> bash:2269 [120]
             bash-2269  [000] 527347.991143: sched_switch: task bash:2269 [120] ==> sshd:2267 [120]
             sshd-2267  [000] 527347.992959: sched_switch: task sshd:2267 [120] ==> swapper:0 [140]
           <idle>-0     [000] 527348.531989: sched_switch: task swapper:0 [140] ==> events/0:5 [115]
         events/0-5     [000] 527348.532115: sched_switch: task events/0:5 [115] ==> swapper:0 [140]
 ...

Changelog:
v1->v2: Update Kconfig to select CONTEXT_SWITCH_TRACER in
        ENABLE_EVENT_TRACING
v2->v3: v2 can solve problem that was caused by config EVENT_TRACING
        alone, but when CONFIG_FTRACE is off and CONFIG_TRACING is
        selected by other config, compile fail happened again.
        This version solves it.

[ Impact: fix incomplete output of event tracing ]

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-26 03:03:21 +02:00
Lai Jiangshan
4f5359685a tracing: add trace_event_read_lock()
I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().

This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.

Eg:

--Task A--

print_trace_line(trace) {
  event = find_ftrace_event(trace)

--Task B--

trace_module_remove_events(mod) {
  list_trace_events_module(ev, mod) {
    unregister_ftrace_event(ev->event) {
      hlist_del(ev->event->node)
        list_del(....)
    }
  }
}
|--> module removed, the event has been dropped

--Task A--

  event->print(trace); // Dereferencing freed memory

If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.

RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().

[ Impact: fix possible freed memory dereference in ftrace ]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-25 23:53:41 +02:00
Ingo Molnar
0127c3ea08 perf_counter: fix warning & lockup
- remove bogus warning
 - fix wakeup from NMI path lockup
 - also fix up whitespace noise in perf_counter.h

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.703093461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 22:02:23 +02:00
Peter Zijlstra
a78ac32587 perf_counter: Generic per counter interrupt throttle
Introduce a generic per counter interrupt throttle.

This uses the perf_counter_overflow() quick disable to throttle a specific
counter when its going too fast when a pmu->unthrottle() method is provided
which can undo the quick disable.

Power needs to implement both the quick disable and the unthrottle method.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.703093461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 21:41:12 +02:00
Peter Zijlstra
10989fb245 perf_counter: Fix PERF_COUNTER_CONTEXT_SWITCHES for cpu counters
Ingo noticed that cpu counters had 0 context switches, even though
there was plenty scheduling on the cpu.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.419025548@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 14:55:01 +02:00
Peter Zijlstra
6ab423e0ea perf_counter: Propagate inheritance failures down the fork() path
Fail fork() when we fail inheritance for some reason (-ENOMEM most likely).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.324656474@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 14:55:01 +02:00
Peter Zijlstra
771d7cde14 perf_counter: Make pctrl() affect inherited counters too
Paul noted that the new ptcrl() didn't work on child counters.

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.203151469@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 14:55:00 +02:00
Ingo Molnar
e4cbb4e3ac perf_counter: Move child perfcounter init to after scheduler init
Initialize a task's perfcounters (inherit from parent, etc.) after
the child task's scheduler fields have been initialized already.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 13:05:06 +02:00
Linus Torvalds
93c3248380 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Do not hold dpm_list_mtx while disabling/enabling nonboot CPUs
2009-05-24 19:38:25 -07:00
James Bottomley
d5a877e8dd async: make sure independent async domains can't accidentally entangle
The problem occurs when async_synchronize_full_domain() is called when
the async_pending list is not empty.  This will cause lowest_running()
to return the cookie of the first entry on the async_pending list, which
might be nothing at all to do with the domain being asked for and thus
cause the domain synchronization to wait for an unrelated domain.   This
can cause a deadlock if domain synchronization is used from one domain
to wait for another.

Fix by running over the async_pending list to see if any pending items
actually belong to our domain (and return their cookies if they do).

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-24 13:38:41 -07:00
Rafael J. Wysocki
32bdfac546 PM: Do not hold dpm_list_mtx while disabling/enabling nonboot CPUs
We shouldn't hold dpm_list_mtx while executing
[disable|enable]_nonboot_cpus(), because theoretically this may lead
to a deadlock as shown by the following example (provided by Johannes
Berg):

CPU 3       CPU 2                     CPU 1
                                      suspend/hibernate
            something:
            rtnl_lock()               device_pm_lock()
                                       -> mutex_lock(&dpm_list_mtx)

            mutex_lock(&dpm_list_mtx)

linkwatch_work
 -> rtnl_lock()
                                      disable_nonboot_cpus()
                                       -> flush CPU 3 workqueue

Fortunately, device drivers are supposed to stop any activities that
might lead to the registration of new device objects way before
disable_nonboot_cpus() is called, so it shouldn't be necessary to
hold dpm_list_mtx over the entire late part of device suspend and
early part of device resume.

Thus, during the late suspend and the early resume of devices acquire
dpm_list_mtx only when dpm_list is going to be traversed and release
it right after that.

This patch is reported to fix the regressions tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=13245.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Miles Lane <miles.lane@gmail.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
2009-05-24 21:15:07 +02:00
Ingo Molnar
a3862d3f81 perf_counter: Increase mmap limit
In a default 'perf top' run the tool will create a counter for
each online CPU. With enough CPUs this will eventually exhaust
the default limit.

So scale it up with the number of online CPUs.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-24 09:02:37 +02:00
Peter Zijlstra
475c557973 perf_counter: Remove perf_counter_context::nr_enabled
now that pctrl() no longer disables other people's counters,
remove the PMU cache code that deals with that.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163013.032998331@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-24 08:24:30 +02:00
Peter Zijlstra
082ff5a276 perf_counter: Change pctrl() behaviour
Instead of en/dis-abling all counters acting on a particular
task, en/dis- able all counters we created.

[ v2: fix crash on first counter enable ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.916937244@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-24 08:24:08 +02:00
Peter Zijlstra
aa9c67f53d perf_counter: Simplify context cleanup
Use perf_counter_remove_from_context() to remove counters from
the context.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.796275849@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 19:37:47 +02:00
Peter Zijlstra
682076ae1d perf_counter: Sanitize context locking
Ensure we're consistent with the context locks.

 context->mutex
   context->lock
     list_{add,del}_counter();

so that either lock is sufficient to stabilize the context.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.618790733@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 19:37:46 +02:00
Peter Zijlstra
fccc714b31 perf_counter: Sanitize counter->mutex
s/counter->mutex/counter->child_mutex/ and make sure its only
used to protect child_list.

The usage in __perf_counter_exit_task() doesn't appear to be
problematic since ctx->mutex also covers anything related to fd
tear-down.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.533186528@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 19:37:45 +02:00
Peter Zijlstra
e220d2dcb9 perf_counter: Fix dynamic irq_period logging
We call perf_adjust_freq() from perf_counter_task_tick() which
is is called under the rq->lock causing lock recursion.
However, it's no longer required to be called under the
rq->lock, so remove it from under it.

Also, fix up some related comments.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163012.476197912@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 19:37:44 +02:00
Paul Mundt
948cd52906 sparseirq: Allow early irq_desc allocation
Presently non-legacy IRQs have their irq_desc allocated with
kzalloc_node(). This assumes that all callers of irq_to_desc_node_alloc()
will be sufficiently late in the boot process that kmalloc is available.

While porting sparseirq support to sh this blew up immediately, as at the
time that we register the CPU's interrupt vector map only bootmem is
available. Check slab_is_available() to work out which path to use.

[ Impact: fix SH early boot crash with sparseirq enabled ]

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
LKML-Reference: <20090522014008.GA2806@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-23 14:55:24 +02:00
Jens Axboe
9bd7de51ee Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/ide/ide-io.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:28:35 +02:00
Jens Axboe
e4b636366c Merge branch 'master' into for-2.6.31
Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 20:25:34 +02:00
Paul Mackerras
564c2b210a perf_counter: Optimize context switch between identical inherited contexts
When monitoring a process and its descendants with a set of inherited
counters, we can often get the situation in a context switch where
both the old (outgoing) and new (incoming) process have the same set
of counters, and their values are ultimately going to be added together.
In that situation it doesn't matter which set of counters are used to
count the activity for the new process, so there is really no need to
go through the process of reading the hardware counters and updating
the old task's counters and then setting up the PMU for the new task.

This optimizes the context switch in this situation.  Instead of
scheduling out the perf_counter_context for the old task and
scheduling in the new context, we simply transfer the old context
to the new task and keep using it without interruption.  The new
context gets transferred to the old task.  This means that both
tasks still have a valid perf_counter_context, so no special case
is introduced when the old task gets scheduled in again, either on
this CPU or another CPU.

The equivalence of contexts is detected by keeping a pointer in
each cloned context pointing to the context it was cloned from.
To cope with the situation where a context is changed by adding
or removing counters after it has been cloned, we also keep a
generation number on each context which is incremented every time
a context is changed.  When a context is cloned we take a copy
of the parent's generation number, and two cloned contexts are
equivalent only if they have the same parent and the same
generation number.  In order that the parent context pointer
remains valid (and is not reused), we increment the parent
context's reference count for each context cloned from it.

Since we don't have individual fds for the counters in a cloned
context, the only thing that can make two clones of a given parent
different after they have been cloned is enabling or disabling all
counters with prctl.  To account for this, we keep a count of the
number of enabled counters in each context.  Two contexts must have
the same number of enabled counters to be considered equivalent.

Here are some measurements of the context switch time as measured with
the lat_ctx benchmark from lmbench, comparing the times obtained with
and without this patch series:

		-----Unmodified-----		With this patch series
Counters:	none	2 HW	4H+4S	none	2 HW	4H+4S

2 processes:
Average		3.44	6.45	11.24	3.12	3.39	3.60
St dev		0.04	0.04	0.13	0.05	0.17	0.19

8 processes:
Average		6.45	8.79	14.00	5.57	6.23	7.57
St dev		1.27	1.04	0.88	1.42	1.46	1.42

32 processes:
Average		5.56	8.43	13.78	5.28	5.55	7.15
St dev		0.41	0.47	0.53	0.54	0.57	0.81

The numbers are the mean and standard deviation of 20 runs of
lat_ctx.  The "none" columns are lat_ctx run directly without any
counters.  The "2 HW" columns are with lat_ctx run under perfstat,
counting cycles and instructions.  The "4H+4S" columns are lat_ctx run
under perfstat with 4 hardware counters and 4 software counters
(cycles, instructions, cache references, cache misses, task
clock, context switch, cpu migrations, and page faults).

[ Impact: performance optimization of counter context-switches ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10666.517218.332164@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 12:18:20 +02:00
Paul Mackerras
a63eaf34ae perf_counter: Dynamically allocate tasks' perf_counter_context struct
This replaces the struct perf_counter_context in the task_struct with
a pointer to a dynamically allocated perf_counter_context struct.  The
main reason for doing is this is to allow us to transfer a
perf_counter_context from one task to another when we do lazy PMU
switching in a later patch.

This has a few side-benefits: the task_struct becomes a little smaller,
we save some memory because only tasks that have perf_counters attached
get a perf_counter_context allocated for them, and we can remove the
inclusion of <linux/perf_counter.h> in sched.h, meaning that we don't
end up recompiling nearly everything whenever perf_counter.h changes.

The perf_counter_context structures are reference-counted and freed
when the last reference is dropped.  A context can have references
from its task and the counters on its task.  Counters can outlive the
task so it is possible that a context will be freed well after its
task has exited.

Contexts are allocated on fork if the parent had a context, or
otherwise the first time that a per-task counter is created on a task.
In the latter case, we set the context pointer in the task struct
locklessly using an atomic compare-and-exchange operation in case we
raced with some other task in creating a context for the subject task.

This also removes the task pointer from the perf_counter struct.  The
task pointer was not used anywhere and would make it harder to move a
context from one task to another.  Anything that needed to know which
task a counter was attached to was already using counter->ctx->task.

The __perf_counter_init_context function moves up in perf_counter.c
so that it can be called from find_get_context, and now initializes
the refcount, but is otherwise unchanged.

We were potentially calling list_del_counter twice: once from
__perf_counter_exit_task when the task exits and once from
__perf_counter_remove_from_context when the counter's fd gets closed.
This adds a check in list_del_counter so it doesn't do anything if
the counter has already been removed from the lists.

Since perf_counter_task_sched_in doesn't do anything if the task doesn't
have a context, and leaves cpuctx->task_ctx = NULL, this adds code to
__perf_install_in_context to set cpuctx->task_ctx if necessary, i.e. in
the case where the current task adds the first counter to itself and
thus creates a context for itself.

This also adds similar code to __perf_counter_enable to handle a
similar situation which can arise when the counters have been disabled
using prctl; that also leaves cpuctx->task_ctx = NULL.

[ Impact: refactor counter context management to prepare for new feature ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18966.10075.781053.231153@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 12:18:19 +02:00
James Morris
2c9e703c61 Merge branch 'master' into next
Conflicts:
	fs/exec.c

Removed IMA changes (the IMA checks are now performed via may_open()).

Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 18:40:59 +10:00
Paul Mundt
5f8371cec9 Merge branches 'sh/stable-updates' and 'sh/sparseirq' 2009-05-22 13:29:37 +09:00
Ingo Molnar
34adc80622 perf_counter: Fix context removal deadlock
Disable the PMU globally before removing a counter from a
context. This fixes the following lockup:

[22081.741922] ------------[ cut here ]------------
[22081.746668] WARNING: at arch/x86/kernel/cpu/perf_counter.c:803 intel_pmu_handle_irq+0x9b/0x24e()
[22081.755624] Hardware name: X8DTN
[22081.758903] perfcounters: irq loop stuck!
[22081.762985] Modules linked in:
[22081.766136] Pid: 11082, comm: perf Not tainted 2.6.30-rc6-tip #226
[22081.772432] Call Trace:
[22081.774940]  <NMI>  [<ffffffff81019aed>] ? intel_pmu_handle_irq+0x9b/0x24e
[22081.781993]  [<ffffffff81019aed>] ? intel_pmu_handle_irq+0x9b/0x24e
[22081.788368]  [<ffffffff8104505c>] ? warn_slowpath_common+0x77/0xa3
[22081.794649]  [<ffffffff810450d3>] ? warn_slowpath_fmt+0x40/0x45
[22081.800696]  [<ffffffff81019aed>] ? intel_pmu_handle_irq+0x9b/0x24e
[22081.807080]  [<ffffffff814d1a72>] ? perf_counter_nmi_handler+0x3f/0x4a
[22081.813751]  [<ffffffff814d2d09>] ? notifier_call_chain+0x58/0x86
[22081.819951]  [<ffffffff8105b250>] ? notify_die+0x2d/0x32
[22081.825392]  [<ffffffff814d1414>] ? do_nmi+0x8e/0x242
[22081.830538]  [<ffffffff814d0f0a>] ? nmi+0x1a/0x20
[22081.835342]  [<ffffffff8117e102>] ? selinux_file_free_security+0x0/0x1a
[22081.842105]  [<ffffffff81018793>] ? x86_pmu_disable_counter+0x15/0x41
[22081.848673]  <<EOE>>  [<ffffffff81018f3d>] ? x86_pmu_disable+0x86/0x103
[22081.855512]  [<ffffffff8108fedd>] ? __perf_counter_remove_from_context+0x0/0xfe
[22081.862926]  [<ffffffff8108fcbc>] ? counter_sched_out+0x30/0xce
[22081.868909]  [<ffffffff8108ff36>] ? __perf_counter_remove_from_context+0x59/0xfe
[22081.876382]  [<ffffffff8106808a>] ? smp_call_function_single+0x6c/0xe6
[22081.882955]  [<ffffffff81091b96>] ? perf_release+0x86/0x14c
[22081.888600]  [<ffffffff810c4c84>] ? __fput+0xe7/0x195
[22081.893718]  [<ffffffff810c213e>] ? filp_close+0x5b/0x62
[22081.899107]  [<ffffffff81046a70>] ? put_files_struct+0x64/0xc2
[22081.905031]  [<ffffffff8104841a>] ? do_exit+0x1e2/0x6ef
[22081.910360]  [<ffffffff814d0a60>] ? _spin_lock_irqsave+0x9/0xe
[22081.916292]  [<ffffffff8104898e>] ? do_group_exit+0x67/0x93
[22081.921953]  [<ffffffff810489cc>] ? sys_exit_group+0x12/0x16
[22081.927759]  [<ffffffff8100baab>] ? system_call_fastpath+0x16/0x1b
[22081.934076] ---[ end trace 3a3936ce3e1b4505 ]---

And could potentially also fix the lockup reported by Marcelo Tosatti.

Also, print more debug info in case of a detected lockup.

[ Impact: fix lockup ]

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 20:12:54 +02:00
Ming Lei
5537937696 ftrace: fix check for return value of register_module_notifier in event_trace_init
register_module_notifier() returns zero in the success case.
So fix the inverted fail case check in trace events modules
handler.

[ Impact: fix spurious warning on ftrace initialization]

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-05-20 19:23:11 +02:00
Peter Zijlstra
afedadf23a perf_counter: Optimize sched in/out of counters
Avoid a function call for !group counters by directly calling the counter
function.

[ Impact: micro-optimize the code ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090520102553.511933670@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 12:43:34 +02:00
Peter Zijlstra
b986d7ec0f perf_counter: Optimize disable of time based sw counters
Currently we call hrtimer_cancel() unconditionally on disable of time based
software counters. Avoid when possible.

[ Impact: micro-optimize the code ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090520102553.388185031@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 12:43:33 +02:00
Peter Zijlstra
26b119bc81 perf_counter: Log irq_period changes
For the dynamic irq_period code, log whenever we change the period so that
analyzing code can normalize the event flow.

[ Impact: add new feature to allow more precise profiling ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090520102553.298769743@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 12:43:33 +02:00
Peter Zijlstra
d7b629a34f perf_counter: Solve the rotate_ctx vs inherit race differently
Instead of disabling RR scheduling of the counters, use a different list
that does not get rotated to iterate the counters on inheritance.

[ Impact: cleanup, optimization ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090520102553.237504544@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 12:43:32 +02:00
Thomas Gleixner
2070887fde futex: fix restart in wait_requeue_pi
If the waiter has been requeued to the outer PI futex and is
interrupted by a signal and the thread handles the signal then
ERESTART_RESTARTBLOCK is changed to EINTR and the restart block is
discarded. That way we return an unexcpected EINTR to user space
instead of ending up in futex_lock_pi_restart.

But we do not need to restart the syscall because we know that the
condition has changed since we have been requeued. If we would simply
restart the syscall then we would drop out via the comparison of the
user space value with EWOULDBLOCK.

The user space side needs to handle EWOULDBLOCK anyway as the
enqueueing on the inner futex can race with a requeue/wake. So we can
simply return EWOULDBLOCK to user space which also signals that we did
not take the outer futex and let user space handle it in the same way
it has to handle the requeue/wake race.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20 10:34:32 +02:00
Thomas Gleixner
1c840c1490 futex: fix restart for early wakeup in futex_wait_requeue_pi()
The futex_wait_requeue_pi op should restart unconditionally like
futex_lock_pi. The user of that function e.g. pthread_cond_wait can
not be interrupted so we do not care about the SA_RESTART flag of the
signal. Clean up the FIXMEs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20 10:28:45 +02:00
Thomas Gleixner
c8b15a706d futex: cleanup error exit
Reuse the put_key_ref(key2) call in the exit path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20 10:28:45 +02:00
Thomas Gleixner
521c180874 Merge branch 'core/urgent' into core/futexes
Merge reason: this branch was on an pre -rc1 base, merge it up to -rc6+
              to get the latest upstream fixes.

Conflicts:
	kernel/futex.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-20 09:02:28 +02:00
Ingo Molnar
c44d70a340 perf_counter: fix counter inheritance race
Context rotation should not occur when we are in the middle of
walking the counter list when inheriting counters ...

[ Impact: fix occasionally incorrect perf stat results ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 00:22:30 +02:00
Ingo Molnar
33b2fb303f perf_counter: fix counter freeing logic
Fix counter lifetime bugs which explain the crashes reported by
Marcelo Tosatti and Arnaldo Carvalho de Melo.

The new rule is: flushing + freeing is only done for a task's
own counters, never for other tasks.

[ Impact: fix crashes/lockups with inherited counters ]

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-20 00:22:24 +02:00
Thomas Gleixner
64d1304a64 futex: setup writeable mapping for futex ops which modify user space data
The futex code installs a read only mapping via get_user_pages_fast()
even if the futex op function has to modify user space data. The
eventual fault was fixed up by futex_handle_fault() which walked the
VMA with mmap_sem held.

After the cleanup patches which removed the mmap_sem dependency of the
futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex:
clean up fault logic) removed the private VMA walk logic from the
futex code. This change results in a stale RO mapping which is not
fixed up.

Instead of reintroducing the previous fault logic we set up the
mapping in get_user_pages_fast() read/write for all operations which
modify user space data. Also handle private futexes in the same way
and make the current unconditional access_ok(VERIFY_WRITE) depend on
the futex op.

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: stable@kernel.org
2009-05-19 23:36:52 +02:00
Stefan Raspl
fd51d251e4 blktrace: remove debugfs entries on bad path
debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:

	BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error

If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.

[ Impact: fix /debug/tracing file cleanup corner case ]

Signed-off-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-19 10:29:21 +02:00
Ingo Molnar
4200efd9ac sched: properly define the sched_group::cpumask and sched_domain::span fields
Properly document the variable-size structure tricks we are doing
wrt. struct sched_group and sched_domain, and use the field[0] GCC
extension instead of defining a vla array.

Dont use unions for this, as pointed out by Linus.

[ Impact: cleanup, un-confuse Sparse and LLVM ]

Reported-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.01.0905180850110.3301@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-19 09:22:19 +02:00
Linus Torvalds
ee3af6ee77 Merge branches 'sched-fixes-for-linus-2' and 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix fallback sched_clock()'s offset when using jiffies

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS
2009-05-18 10:11:06 -07:00
Linus Torvalds
0130b2d701 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Append prompt in /debug/tracing/README file
  x86/function-graph: fix constraint for recording old return value
2009-05-18 09:15:41 -07:00
Ming Lei
24ed0c4bfc tracing: fix check for return value of register_module_notifier
return zero should be correct, so fix it.

[ Impact: eliminate incorrect syslog message ]

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1242545498-7285-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 10:24:13 +02:00
Ingo Molnar
1079cac0f4 Merge commit 'v2.6.30-rc6' into tracing/core
Merge reason: we were on an -rc4 base, sync up to -rc6

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 10:15:35 +02:00
Ingo Molnar
dc3f81b129 Merge commit 'v2.6.30-rc6' into perfcounters/core
Merge reason: this branch was on an -rc4 base, merge it up to -rc6
              to get the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 07:37:49 +02:00
Linus Torvalds
86460103c4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: check sysdev_suspend(PMSG_FREEZE) return value
2009-05-17 11:46:22 -07:00
Ingo Molnar
0203026b58 perf_counter: fix threaded task exit
Flushing counters in __exit_signal() with irqs disabled is not
a good idea as perf_counter_exit_task() acquires mutexes. So
flush it before acquiring the tasklist lock.

(Note, we still need a fix for when the PID has been unhashed.)

[ Impact: fix crash with inherited counters ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-17 11:26:57 +02:00
Peter Zijlstra
856d56b9e5 perf_counter: Fix counter inheritance
Srivatsa Vaddagiri reported that a Java workload triggers this
warning in kernel/exit.c:

   WARN_ON_ONCE(!list_empty(&tsk->perf_counter_ctx.counter_list));

Add the inherited counter propagation on self-detach, this could
cause counter leaks and incomplete stats in threaded code like
the below:

  #include <pthread.h>
  #include <unistd.h>

  void *thread(void *arg)
  {
          sleep(5);
          return NULL;
  }

  void main(void)
  {
          pthread_t thr;
          pthread_create(&thr, NULL, thread, NULL);
  }

Reported-by: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-17 07:52:24 +02:00
Peter Zijlstra
8bc2095951 perf_counter: Fix inheritance cleanup code
Clean up code that open-coded the list_{add,del}_counter() code in
__perf_counter_exit_task() which consequently diverged. This could
lead to software counter crashes.

Also, fold the ctx->nr_counter inc/dec into those functions and clean
up some of the related code.

[ Impact: fix potential sw counter crash, cleanup ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-17 07:52:23 +02:00
Linus Torvalds
0f6f49a8cd Fix caller information for warn_slowpath_null
Ian Campbell noticed that since "Eliminate thousands of warnings with
gcc 3.2 build" (commit 57adc4d2db) all
WARN_ON()'s currently appear to come from warn_slowpath_null(), eg:

  WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20()

because now that warn_slowpath_null() is in the call path, the
__builtin_return_address(0) returns that, rather than the place that
caused the warning.

Fix this by splitting up the warn_slowpath_null/fmt cases differently,
using a common helper function, and getting the return address in the
right place.  This also happens to avoid the unnecessary stack usage for
the non-stdargs case, and just generally cleans things up.

Make the function name printout use %pS while at it.

Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-16 13:41:28 -07:00
Bjorn Helgaas
4484079d51 PM: check sysdev_suspend(PMSG_FREEZE) return value
Check the return value of sysdev_suspend().  I think this was a typo.
Without this change, the following "if" check is always false.
I also changed the error message so it's distinguishable from the
similar message a few lines above.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-05-15 23:30:50 +02:00
GeunSik Lim
88fc86c283 tracing: Append prompt in /debug/tracing/README file
append prompt in /debug/tracing/README file.

This is trivial issue. Fix typo Mini Howto file(README) for ftrace.

[ Impact: cleanup ]

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: williams <williams@redhat.com>
LKML-Reference: <1242289418.31161.45.camel@centos51>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 19:43:22 +02:00
Linus Torvalds
ade385e4d1 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: gdb documentation fix
  kgdb,i386: use address that SP register points to in the exception frame
  sysrq, intel_fb: fix sysrq g collision
2009-05-15 08:06:45 -07:00
Paul Mackerras
9d23a90a67 perf_counter: allow arch to supply event misc flags and instruction pointer
At present the values we put in overflow events for the misc
flags indicating processor mode and the instruction pointer are
obtained using the standard user_mode() and
instruction_pointer() functions. Those functions tell you where
the performance monitor interrupt was taken, which might not be
exactly where the counter overflow occurred, for example
because interrupts were disabled at the point where the
overflow occurred, or because the processor had many
instructions in flight and chose to complete some more
instructions beyond the one that caused the counter overflow.

Some architectures (e.g. powerpc) can supply more precise
information about where the counter overflow occurred and the
processor mode at that point.  This introduces new functions,
perf_misc_flags() and perf_instruction_pointer(), which arch
code can override to provide more precise information if
available.  They have default implementations which are
identical to the existing code.

This also adds a new misc flag value,
PERF_EVENT_MISC_HYPERVISOR, for the case where a counter
overflow occurred in the hypervisor.  We encode the processor
mode in the 2 bits previously used to indicate user or kernel
mode; the values for user and kernel mode are unchanged and
hypervisor mode is indicated by both bits being set.

[ Impact: generalize perfcounter core facilities ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <18956.1272.818511.561835@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 16:38:56 +02:00
Peter Zijlstra
2e569d3672 perf_counter: frequency based adaptive irq_period, 32-bit fix
fix:

  kernel/built-in.o: In function `perf_counter_alloc':
  perf_counter.c:(.text+0x7ddc7): undefined reference to `__udivdi3'

[ Impact: build fix on 32-bit systems ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <1242394667.6642.1887.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 15:40:25 +02:00
Thomas Gleixner
2d02494f5a sched, timers: cleanup avenrun users
avenrun is an rough estimate so we don't have to worry about
consistency of the three avenrun values. Remove the xtime lock
dependency and provide a function to scale the values. Cleanup the
users.

[ Impact: cleanup ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2009-05-15 15:32:45 +02:00
Thomas Gleixner
dce48a84ad sched, timers: move calc_load() to scheduler
Dimitri Sivanich noticed that xtime_lock is held write locked across
calc_load() which iterates over all online CPUs. That can cause long
latencies for xtime_lock readers on large SMP systems. 

The load average calculation is an rough estimate anyway so there is
no real need to protect the readers vs. the update. It's not a problem
when the avenrun array is updated while a reader copies the values.

Instead of iterating over all online CPUs let the scheduler_tick code
update the number of active tasks shortly before the avenrun update
happens. The avenrun update itself is handled by the CPU which calls
do_timer().

[ Impact: reduce xtime_lock write locked section ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
2009-05-15 15:32:45 +02:00
Peter Zijlstra
60db5e09c1 perf_counter: frequency based adaptive irq_period
Instead of specifying the irq_period for a counter, provide a target interrupt
frequency and dynamically adapt the irq_period to match this frequency.

[ Impact: new perf-counter attribute/feature ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.646195868@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 15:26:56 +02:00
Peter Zijlstra
789f90fcf6 perf_counter: per user mlock gift
Instead of a per-process mlock gift for perf-counters, use a
per-user gift so that there is less of a DoS potential.

[ Impact: allow less worst-case unprivileged memory consumption ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.496182835@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 15:26:56 +02:00
Peter Zijlstra
548e1ddf25 perf_counter: remove perf_disable/enable exports
Now that ACPI idle doesn't use it anymore, remove the exports.

[ Impact: remove dead code/data ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090515132018.429826617@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 15:26:55 +02:00
Thomas Gleixner
f1a11e0576 futex: remove the wait queue
The waitqueue which is used in struct futex_q is a leftover from the
futexfd implementation. There is no need to use a waitqueue at all, as
the waiting task is the only user of it. The waitqueue just adds
additional locking and a loop in the wake up path which both can be
avoided.

We have already a task reference in struct futex_q which is used for
PI futexes. Use it for normal futexes as well and just wake up the
task directly.

The logic of signalling the futex wakeup via setting q->lock_ptr to
NULL is kept with the difference that we set it NULL before doing the
wakeup. This opens an exit race window vs. a non futex wake up of the
to be woken up task, which we prevent with get_task_struct /
put_task_struct on the waiter.

[ Impact: simplification ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-15 15:24:18 +02:00
Jason Wessel
364b5b7b1d sysrq, intel_fb: fix sysrq g collision
Commit 79e539453b introduced a
regression where you cannot use sysrq 'g' to enter kgdb.  The solution
is to move the intel fb sysrq over to V for video instead of G for
graphics.  The SMP VOYAGER code to register for the sysrq-v is not
anywhere to be found in the mainline kernel, so the comments in the
code were cleaned up as well.

This patch also cleans up the sysrq definitions for kgdb to make it
generic for the kernel debugger, such that the sysrq 'g' can be used
in the future to enter a gdbstub or another kernel debugger.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-05-15 07:56:24 -05:00
Jens Axboe
cd17cbfda0 Revert "mm: add /proc controls for pdflush threads"
This reverts commit fafd688e4c.

Work is progressing to switch away from pdflush as the process backing
for flushing out dirty data. So it seems pointless to add more knobs
to control pdflush threads. The original author of the patch did not
have any specific use cases for adding the knobs, so we can easily
revert this before 2.6.30 to avoid having to maintain this API
forever.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-15 11:32:24 +02:00
Peter Zijlstra
9e35ad388b perf_counter: Rework the perf counter disable/enable
The current disable/enable mechanism is:

	token = hw_perf_save_disable();
	...
	/* do bits */
	...
	hw_perf_restore(token);

This works well, provided that the use nests properly. Except we don't.

x86 NMI/INT throttling has non-nested use of this, breaking things. Therefore
provide a reference counter disable/enable interface, where the first disable
disables the hardware, and the last enable enables the hardware again.

[ Impact: refactor, simplify the PMU disable/enable logic ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:47:02 +02:00
Peter Zijlstra
53020fe81e perf_counter: Fix perf_output_copy() WARN to account for overflow
The simple reservation test in perf_output_copy() failed to take
unsigned int overflow into account, fix this.

[ Impact: fix false positive warning with more than 4GB of profiling data ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:46:59 +02:00
Li Zefan
5872144f64 tracing/filters: fix off-by-one bug
We should leave the last slot for the ending '\0'.

[ Impact: fix possible crash when the length of an operand is 128 ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC8C.30602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:55:12 -04:00
Li Zefan
8cd995b6de tracing/filters: add missing unlock in a failure path
[ Impact: fix deadlock in a rare case we fail to allocate memory ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC6F.7070200@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:55:10 -04:00
Steven Rostedt
1ec7c4849c tracing: stop stack trace on first empty entry
The stack tracer stores eight entries in the ring buffer when an event
traces the stack. The output outputs all eight entries regardless of
how many entries were recorded.

This patch breaks out of the loop when a null entry is discovered.

[ Impact: only print the stack that is recorded ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:40:06 -04:00
Arun R Bharadwaj
eea08f32ad timers: Logic to move non pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

This patch migrates all non pinned timers and hrtimers to the current
idle load balancer, from all the idle CPUs. Timers firing on busy CPUs
are not migrated.

While migrating hrtimers, care should be taken to check if migrating
a hrtimer would result in a latency or not. So we compare the expiry of the
hrtimer with the next timer interrupt on the target cpu and migrate the
hrtimer only if it expires *after* the next interrupt on the target cpu.
So, added a clockevents_get_next_event() helper function to return the
next_event on the target cpu's clock_event_device.

[ tglx: cleanups and simplifications ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Arun R Bharadwaj
cd1bb94b4a timers: /proc/sys sysctl hook to enable timer migration
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

This patch creates the /proc/sys sysctl interface at
/proc/sys/kernel/timer_migration

Timer migration is enabled by default.

To disable timer migration, when CONFIG_SCHED_DEBUG = y,

echo 0 > /proc/sys/kernel/timer_migration

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Arun R Bharadwaj
5c333864a6 timers: Identifying the existing pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

The following pinned hrtimers have been identified and marked:
1)sched_rt_period_timer
2)tick_sched_timer
3)stack_trace_timer_fn

[ tglx: fixup the hrtimer pinned mode ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Arun R Bharadwaj
597d027573 timers: Framework for identifying pinned timers
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:

This patch creates a new framework for identifying cpu-pinned timers
and hrtimers.

This framework is needed because pinned timers are expected to fire on
the same CPU on which they are queued. So it is essential to identify
these and not migrate them, in case there are any.

For regular timers, the currently existing add_timer_on() can be used
queue pinned timers and subsequently mod_timer_pinned() can be used
to modify the 'expires' field.

For hrtimers, new modes HRTIMER_ABS_PINNED and HRTIMER_REL_PINNED are
added to queue cpu-pinned hrtimer.

[ tglx: use .._PINNED mode argument instead of creating tons of new
functions ]

Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-13 16:52:42 +02:00
Steven Rostedt
39a2eddb9b genirq: fix comment to say IRQ_WAKE_THREAD
Trying to implement a driver to use threaded irqs, I was confused when the 
return value to use that was described in the comment above 
request_threaded_irq was not defined.

Turns out that the enum is IRQ_WAKE_THREAD where as the comment said 
IRQ_THREAD_WAKE.

[Impact: do not confuse developers with wrong comments ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.0905121431020.13338@gandalf.stny.rr.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-12 22:11:29 +02:00
Ingo Molnar
d80c19df5f lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS
Now that lockdep coverage has increased it has become easier to
run out of entries:

[   21.401387] BUG: MAX_LOCKDEP_ENTRIES too low!
[   21.402007] turning off the locking correctness validator.
[   21.402007] Pid: 1555, comm: S99local Not tainted 2.6.30-rc5-tip #2
[   21.402007] Call Trace:
[   21.402007]  [<ffffffff81069789>] add_lock_to_list+0x53/0xba
[   21.402007]  [<ffffffff810eb615>] ? lookup_mnt+0x19/0x53
[   21.402007]  [<ffffffff8106be14>] check_prev_add+0x14b/0x1c7
[   21.402007]  [<ffffffff8106c304>] validate_chain+0x474/0x52a
[   21.402007]  [<ffffffff8106c6fc>] __lock_acquire+0x342/0x3c7
[   21.402007]  [<ffffffff8106c842>] lock_acquire+0xc1/0xe5
[   21.402007]  [<ffffffff810eb615>] ? lookup_mnt+0x19/0x53
[   21.402007]  [<ffffffff8153aedc>] _spin_lock+0x31/0x66

Double the size - as we've done in the past.

[ Impact: allow lockdep to cover more locks ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 19:59:52 +02:00
Paul Mackerras
e758a33d6f perf_counter: call hw_perf_save_disable/restore around group_sched_in
I noticed that when enabling a group via the PERF_COUNTER_IOC_ENABLE
ioctl on the group leader, the counters weren't enabled and counting
immediately on return from the ioctl, but did start counting a little
while later (presumably after a context switch).

The reason was that __perf_counter_enable calls group_sched_in which
calls hw_perf_group_sched_in, which on powerpc assumes that the caller
has called hw_perf_save_disable already.  Until commit 46d686c6
("perf_counter: put whole group on when enabling group leader") it was
true that all callers of group_sched_in had called
hw_perf_save_disable first, and the powerpc hw_perf_group_sched_in
relies on that (there isn't an x86 version).

This fixes the problem by putting calls to hw_perf_save_disable /
hw_perf_restore around the calls to group_sched_in and
counter_sched_in in __perf_counter_enable.  Having the calls to
hw_perf_save_disable/restore around the counter_sched_in call is
harmless and makes this call consistent with the other call sites
of counter_sched_in, which have all called hw_perf_save_disable first.

[ Impact: more precise counter group disable/enable functionality ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18953.25733.53359.147452@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 15:31:06 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Steven Rostedt
168b6b1d05 ring-buffer: move code around to remove some branches
This is a bit of micro-optimizations. But since the ring buffer is used
in tracing every function call, it is an extreme hot path. Every nanosecond
counts.

This change shows over 5% improvement in the ring-buffer-benchmark.

[ Impact: more efficient code ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 23:33:06 -04:00
Steven Rostedt
88eb012536 ring-buffer: use internal time stamp function
The ring_buffer_time_stamp that is exported adds a little more overhead
than is needed for using it internally. This patch adds an internal
timestamp function that can be inlined (a single line function)
and used internally for the ring buffer.

[ Impact: a little less overhead to the ring buffer ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 23:14:03 -04:00
Steven Rostedt
0f0c85fc80 ring-buffer: small optimizations
Doing some small changes in the fast path of the ring buffer recording
saves over 3% in the ring-buffer-benchmark test.

[ Impact: a little faster ring buffer recording ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 23:12:34 -04:00
H. Peter Anvin
5031296c57 x86: add extension fields for bootloader type and version
A long ago, in days of yore, it all began with a god named Thor.
There were vikings and boats and some plans for a Linux kernel
header.  Unfortunately, a single 8-bit field was used for bootloader
type and version.  This has generally worked without *too* much pain,
but we're getting close to flat running out of ID fields.

Add extension fields for both type and version.  The type will be
extended if it the old field is 0xE; the version is a simple MSB
extension.

Keep /proc/sys/kernel/bootloader_type containing
(type << 4) + (ver & 0xf) for backwards compatiblity, but also add
/proc/sys/kernel/bootloader_version which contains the full version
number.

[ Impact: new feature to support more bootloaders ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-05-11 17:45:06 -07:00
Steven Rostedt
be957c447f ring-buffer: move calculation of event length
The event length is calculated and passed in to rb_reserve_next_event
in two different locations. Having rb_reserve_next_event do the
calculations directly makes only one location to do the change and
causes the calculation to be inlined by gcc.

Before:
   text    data     bss     dec     hex filename
  16538      24      12   16574    40be kernel/trace/ring_buffer.o

After:
   text    data     bss     dec     hex filename
  16490      24      12   16526    408e kernel/trace/ring_buffer.o

[ Impact: smaller more efficient code ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 14:42:53 -04:00
Steven Rostedt
1cd8d73589 ring-buffer: remove type parameter from rb_reserve_next_event
The rb_reserve_next_event is only called for the data type (type = 0).
There is no reason to pass in the type to the function.

Before:
   text    data     bss     dec     hex filename
  16554      24      12   16590    40ce kernel/trace/ring_buffer.o

After:
   text    data     bss     dec     hex filename
  16538      24      12   16574    40be kernel/trace/ring_buffer.o

[ Impact: cleaner, smaller and slightly more efficient code ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 14:19:00 -04:00