Commit Graph

28 Commits

Author SHA1 Message Date
Arnaldo Carvalho de Melo
a2e2725541 net: Introduce recvmmsg socket syscall
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:40:10 -07:00
David S. Miller
b7058842c9 net: Make setsockopt() optlen be unsigned.
This provides safety against negative optlen at the type
level instead of depending upon (sometimes non-trivial)
checks against this sprinkled all over the the place, in
each and every implementation.

Based upon work done by Arjan van de Ven and feedback
from Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 16:12:20 -07:00
Johannes Berg
1dacc76d00 net/compat/wext: send different messages to compat tasks
Wireless extensions have the unfortunate problem that events
are multicast netlink messages, and are not independent of
pointer size. Thus, currently 32-bit tasks on 64-bit platforms
cannot properly receive events and fail with all kinds of
strange problems, for instance wpa_supplicant never notices
disassociations, due to the way the 64-bit event looks (to a
32-bit process), the fact that the address is all zeroes is
lost, it thinks instead it is 00:00:00:00:01:00.

The same problem existed with the ioctls, until David Miller
fixed those some time ago in an heroic effort.

A different problem caused by this is that we cannot send the
ASSOCREQIE/ASSOCRESPIE events because sending them causes a
32-bit wpa_supplicant on a 64-bit system to overwrite its
internal information, which is worse than it not getting the
information at all -- so we currently resort to sending a
custom string event that it then parses. This, however, has a
severe size limitation we are frequently hitting with modern
access points; this limitation would can be lifted after this
patch by sending the correct binary, not custom, event.

A similar problem apparently happens for some other netlink
users on x86_64 with 32-bit tasks due to the alignment for
64-bit quantities.

In order to fix these problems, I have implemented a way to
send compat messages to tasks. When sending an event, we send
the non-compat event data together with a compat event data in
skb_shinfo(main_skb)->frag_list. Then, when the event is read
from the socket, the netlink code makes sure to pass out only
the skb that is compatible with the task. This approach was
suggested by David Miller, my original approach required
always sending two skbs but that had various small problems.

To determine whether compat is needed or not, I have used the
MSG_CMSG_COMPAT flag, and adjusted the call path for recv and
recvfrom to include it, even if those calls do not have a cmsg
parameter.

I have not solved one small part of the problem, and I don't
think it is necessary to: if a 32-bit application uses read()
rather than any form of recvmsg() it will still get the wrong
(64-bit) event. However, neither do applications actually do
this, nor would it be a regression.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15 08:53:39 -07:00
Patrick Ohly
20d4947353 net: socket infrastructure for SO_TIMESTAMPING
The overlap with the old SO_TIMESTAMP[NS] options is handled so
that time stamping in software (net_enable_timestamp()) is
enabled when SO_TIMESTAMP[NS] and/or SO_TIMESTAMPING_RX_SOFTWARE
is set.  It's disabled if all of these are off.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:35 -08:00
Ulrich Drepper
de11defebf reintroduce accept4
Introduce a new accept4() system call.  The addition of this system call
matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(),
inotify_init1(), epoll_create1(), pipe2()) which added new system calls
that differed from analogous traditional system calls in adding a flags
argument that can be used to access additional functionality.

The accept4() system call is exactly the same as accept(), except that
it adds a flags bit-mask argument.  Two flags are initially implemented.
(Most of the new system calls in 2.6.27 also had both of these flags.)

SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled
for the new file descriptor returned by accept4().  This is a useful
security feature to avoid leaking information in a multithreaded
program where one thread is doing an accept() at the same time as
another thread is doing a fork() plus exec().  More details here:
http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling",
Ulrich Drepper).

The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag
to be enabled on the new open file description created by accept4().
(This flag is merely a convenience, saving the use of additional calls
fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result.

Here's a test program.  Works on x86-32.  Should work on x86-64, but
I (mtk) don't have a system to hand to test with.

It tests accept4() with each of the four possible combinations of
SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies
that the appropriate flags are set on the file descriptor/open file
description returned by accept4().

I tested Ulrich's patch in this thread by applying against 2.6.28-rc2,
and it passes according to my test program.

/* test_accept4.c

  Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk
       <mtk.manpages@gmail.com>

  Licensed under the GNU GPLv2 or later.
*/
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <stdlib.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>

#define PORT_NUM 33333

#define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0)

/**********************************************************************/

/* The following is what we need until glibc gets a wrapper for
  accept4() */

/* Flags for socket(), socketpair(), accept4() */
#ifndef SOCK_CLOEXEC
#define SOCK_CLOEXEC    O_CLOEXEC
#endif
#ifndef SOCK_NONBLOCK
#define SOCK_NONBLOCK   O_NONBLOCK
#endif

#ifdef __x86_64__
#define SYS_accept4 288
#elif __i386__
#define USE_SOCKETCALL 1
#define SYS_ACCEPT4 18
#else
#error "Sorry -- don't know the syscall # on this architecture"
#endif

static int
accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags)
{
   printf("Calling accept4(): flags = %x", flags);
   if (flags != 0) {
       printf(" (");
       if (flags & SOCK_CLOEXEC)
           printf("SOCK_CLOEXEC");
       if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK))
           printf(" ");
       if (flags & SOCK_NONBLOCK)
           printf("SOCK_NONBLOCK");
       printf(")");
   }
   printf("\n");

#if USE_SOCKETCALL
   long args[6];

   args[0] = fd;
   args[1] = (long) sockaddr;
   args[2] = (long) addrlen;
   args[3] = flags;

   return syscall(SYS_socketcall, SYS_ACCEPT4, args);
#else
   return syscall(SYS_accept4, fd, sockaddr, addrlen, flags);
#endif
}

/**********************************************************************/

static int
do_test(int lfd, struct sockaddr_in *conn_addr,
       int closeonexec_flag, int nonblock_flag)
{
   int connfd, acceptfd;
   int fdf, flf, fdf_pass, flf_pass;
   struct sockaddr_in claddr;
   socklen_t addrlen;

   printf("=======================================\n");

   connfd = socket(AF_INET, SOCK_STREAM, 0);
   if (connfd == -1)
       die("socket");
   if (connect(connfd, (struct sockaddr *) conn_addr,
               sizeof(struct sockaddr_in)) == -1)
       die("connect");

   addrlen = sizeof(struct sockaddr_in);
   acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen,
                      closeonexec_flag | nonblock_flag);
   if (acceptfd == -1) {
       perror("accept4()");
       close(connfd);
       return 0;
   }

   fdf = fcntl(acceptfd, F_GETFD);
   if (fdf == -1)
       die("fcntl:F_GETFD");
   fdf_pass = ((fdf & FD_CLOEXEC) != 0) ==
              ((closeonexec_flag & SOCK_CLOEXEC) != 0);
   printf("Close-on-exec flag is %sset (%s); ",
           (fdf & FD_CLOEXEC) ? "" : "not ",
           fdf_pass ? "OK" : "failed");

   flf = fcntl(acceptfd, F_GETFL);
   if (flf == -1)
       die("fcntl:F_GETFD");
   flf_pass = ((flf & O_NONBLOCK) != 0) ==
              ((nonblock_flag & SOCK_NONBLOCK) !=0);
   printf("nonblock flag is %sset (%s)\n",
           (flf & O_NONBLOCK) ? "" : "not ",
           flf_pass ? "OK" : "failed");

   close(acceptfd);
   close(connfd);

   printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL");
   return fdf_pass && flf_pass;
}

static int
create_listening_socket(int port_num)
{
   struct sockaddr_in svaddr;
   int lfd;
   int optval;

   memset(&svaddr, 0, sizeof(struct sockaddr_in));
   svaddr.sin_family = AF_INET;
   svaddr.sin_addr.s_addr = htonl(INADDR_ANY);
   svaddr.sin_port = htons(port_num);

   lfd = socket(AF_INET, SOCK_STREAM, 0);
   if (lfd == -1)
       die("socket");

   optval = 1;
   if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval,
                  sizeof(optval)) == -1)
       die("setsockopt");

   if (bind(lfd, (struct sockaddr *) &svaddr,
            sizeof(struct sockaddr_in)) == -1)
       die("bind");

   if (listen(lfd, 5) == -1)
       die("listen");

   return lfd;
}

int
main(int argc, char *argv[])
{
   struct sockaddr_in conn_addr;
   int lfd;
   int port_num;
   int passed;

   passed = 1;

   port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM;

   memset(&conn_addr, 0, sizeof(struct sockaddr_in));
   conn_addr.sin_family = AF_INET;
   conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
   conn_addr.sin_port = htons(port_num);

   lfd = create_listening_socket(port_num);

   if (!do_test(lfd, &conn_addr, 0, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0))
       passed = 0;
   if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK))
       passed = 0;
   if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK))
       passed = 0;

   close(lfd);

   exit(passed ? EXIT_SUCCESS : EXIT_FAILURE);
}

[mtk.manpages@gmail.com: rewrote changelog, updated test program]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Tested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19 18:49:57 -08:00
Patrick Ohly
d35aac10eb net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller
In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This
has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 01:54:56 -08:00
Ulrich Drepper
aaca0bdca5 flag parameters: paccept
This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:27 -07:00
YOSHIFUJI Hideaki
230b183921 net: Use standard structures for generic socket address structures.
Use sockaddr_storage{} for generic socket address storage
and ensures proper alignment.
Use sockaddr{} for pointers to omit several casts.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-19 22:35:47 -07:00
David L Stevens
42908c69f6 net: Add compat support for getsockopt (MCAST_MSFILTER)
This patch adds support for getsockopt for MCAST_MSFILTER for
both IPv4 and IPv6. It depends on the previous setsockopt patch,
and uses the same method.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29 03:23:22 -07:00
David L Stevens
be666e0a13 net: Several cleanups for the setsockopt compat support.
1) added missing "__user" for kgsr and kgf pointers
2) verify read for only GROUP_FILTER_SIZE(0). The group_filter
        structure definition (via RFC) includes space for one source
        in the source list array, but that source need not be present.
        So, sizeof(group_filter) > GROUP_FILTER_SIZE(0). Fixed
        the user read-check for minimum length to use the smaller size.
3) remove unneeded "&" for gf_slist addresses

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-29 03:23:00 -07:00
David L Stevens
dae5029548 ipv4/ipv6 compat: Fix SSM applications on 64bit kernels.
Add support on 64-bit kernels for seting 32-bit compatible MCAST*
socket options.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-27 14:26:53 -07:00
Patrick McHardy
3bc3fe5eed [NETFILTER]: ip6_tables: add compat support
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:58:36 -08:00
Patrick McHardy
6e23ae2a48 [NETFILTER]: Introduce NF_INET_ hook values
The IPv4 and IPv6 hook values are identical, yet some code tries to figure
out the "correct" value by looking at the address family. Introduce NF_INET_*
values for both IPv4 and IPv6. The old values are kept in a #ifndef __KERNEL__
section for userspace compatibility.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:55 -08:00
Wei Yongjun
1ac70e7ad2 [NET]: Fix function put_cmsg() which may cause usr application memory overflow
When used function put_cmsg() to copy kernel information to user 
application memory, if the memory length given by user application is 
not enough, by the bad length calculate of msg.msg_controllen, 
put_cmsg() function may cause the msg.msg_controllen to be a large 
value, such as 0xFFFFFFF0, so the following put_cmsg() can also write 
data to usr application memory even usr has no valid memory to store 
this. This may cause usr application memory overflow.

int put_cmsg(struct msghdr * msg, int level, int type, int len, void *data)
{
    struct cmsghdr __user *cm
        = (__force struct cmsghdr __user *)msg->msg_control;
    struct cmsghdr cmhdr;
    int cmlen = CMSG_LEN(len);
    ~~~~~~~~~~~~~~~~~~~~~
    int err;

    if (MSG_CMSG_COMPAT & msg->msg_flags)
        return put_cmsg_compat(msg, level, type, len, data);

    if (cm==NULL || msg->msg_controllen < sizeof(*cm)) {
        msg->msg_flags |= MSG_CTRUNC;
        return 0; /* XXX: return error? check spec. */
    }
    if (msg->msg_controllen < cmlen) {
    ~~~~~~~~~~~~~~~~~~~~~~~~
        msg->msg_flags |= MSG_CTRUNC;
        cmlen = msg->msg_controllen;
    }
    cmhdr.cmsg_level = level;
    cmhdr.cmsg_type = type;
    cmhdr.cmsg_len = cmlen;

    err = -EFAULT;
    if (copy_to_user(cm, &cmhdr, sizeof cmhdr))
        goto out;
    if (copy_to_user(CMSG_DATA(cm), data, cmlen - sizeof(struct cmsghdr)))
        goto out;
    cmlen = CMSG_SPACE(len);
~~~~~~~~~~~~~~~~~~~~~~~~~~~
    If MSG_CTRUNC flags is set, msg->msg_controllen is less than 
CMSG_SPACE(len), "msg->msg_controllen -= cmlen" will cause unsinged int 
type msg->msg_controllen to be a large value.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
    msg->msg_control += cmlen;
    msg->msg_controllen -= cmlen;
    ~~~~~~~~~~~~~~~~~~~~~
    err = 0;
out:
    return err;
}

The same promble exists in put_cmsg_compat(). This patch can fix this 
problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-20 14:36:44 -08:00
Ulrich Drepper
4a19542e5f O_CLOEXEC for SCM_RIGHTS
Part two in the O_CLOEXEC saga: adding support for file descriptors received
through Unix domain sockets.

The patch is once again pretty minimal, it introduces a new flag for recvmsg
and passes it just like the existing MSG_CMSG_COMPAT flag.  I think this bit
is not used otherwise but the networking people will know better.

This new flag is not recognized by recvfrom and recv.  These functions cannot
be used for that purpose and the asymmetry this introduces is not worse than
the already existing MSG_CMSG_COMPAT situations.

The patch must be applied on the patch which introduced O_CLOEXEC.  It has to
remove static from the new get_unused_fd_flags function but since scm.c cannot
live in a module the function still hasn't to be exported.

Here's a test program to make sure the code works.  It's so much longer than
the actual patch...

#include <errno.h>
#include <error.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <sys/un.h>

#ifndef O_CLOEXEC
# define O_CLOEXEC 02000000
#endif
#ifndef MSG_CMSG_CLOEXEC
# define MSG_CMSG_CLOEXEC 0x40000000
#endif

int
main (int argc, char *argv[])
{
  if (argc > 1)
    {
      int fd = atol (argv[1]);
      printf ("child: fd = %d\n", fd);
      if (fcntl (fd, F_GETFD) == 0 || errno != EBADF)
        {
          puts ("file descriptor valid in child");
          return 1;
        }
      return 0;

    }

  struct sockaddr_un sun;
  strcpy (sun.sun_path, "./testsocket");
  sun.sun_family = AF_UNIX;

  char databuf[] = "hello";
  struct iovec iov[1];
  iov[0].iov_base = databuf;
  iov[0].iov_len = sizeof (databuf);

  union
  {
    struct cmsghdr hdr;
    char bytes[CMSG_SPACE (sizeof (int))];
  } buf;
  struct msghdr msg = { .msg_iov = iov, .msg_iovlen = 1,
                        .msg_control = buf.bytes,
                        .msg_controllen = sizeof (buf) };
  struct cmsghdr *cmsg = CMSG_FIRSTHDR (&msg);

  cmsg->cmsg_level = SOL_SOCKET;
  cmsg->cmsg_type = SCM_RIGHTS;
  cmsg->cmsg_len = CMSG_LEN (sizeof (int));

  msg.msg_controllen = cmsg->cmsg_len;

  pid_t child = fork ();
  if (child == -1)
    error (1, errno, "fork");
  if (child == 0)
    {
      int sock = socket (PF_UNIX, SOCK_STREAM, 0);
      if (sock < 0)
        error (1, errno, "socket");

      if (bind (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0)
        error (1, errno, "bind");
      if (listen (sock, SOMAXCONN) < 0)
        error (1, errno, "listen");

      int conn = accept (sock, NULL, NULL);
      if (conn == -1)
        error (1, errno, "accept");

      *(int *) CMSG_DATA (cmsg) = sock;
      if (sendmsg (conn, &msg, MSG_NOSIGNAL) < 0)
        error (1, errno, "sendmsg");

      return 0;
    }

  /* For a test suite this should be more robust like a
     barrier in shared memory.  */
  sleep (1);

  int sock = socket (PF_UNIX, SOCK_STREAM, 0);
  if (sock < 0)
    error (1, errno, "socket");

  if (connect (sock, (struct sockaddr *) &sun, sizeof (sun)) < 0)
    error (1, errno, "connect");
  unlink (sun.sun_path);

  *(int *) CMSG_DATA (cmsg) = -1;

  if (recvmsg (sock, &msg, MSG_CMSG_CLOEXEC) < 0)
    error (1, errno, "recvmsg");

  int fd = *(int *) CMSG_DATA (cmsg);
  if (fd == -1)
    error (1, 0, "no descriptor received");

  char fdname[20];
  snprintf (fdname, sizeof (fdname), "%d", fd);
  execl ("/proc/self/exe", argv[0], fdname, NULL);
  puts ("execl failed");
  return 1;
}

[akpm@linux-foundation.org: Fix fastcall inconsistency noted by Michael Buesch]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Buesch <mb@bu3sch.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Eric Dumazet
92f37fd2ee [NET]: Adding SO_TIMESTAMPNS / SCM_TIMESTAMPNS support
Now that network timestamps use ktime_t infrastructure, we can add a new
SOL_SOCKET sockopt  SO_TIMESTAMPNS.

This command is similar to SO_TIMESTAMP, but permits transmission of
a 'timespec struct' instead of a 'timeval struct' control message.
(nanosecond resolution instead of microsecond)

Control message is labelled SCM_TIMESTAMPNS instead of SCM_TIMESTAMP

A socket cannot mix SO_TIMESTAMP and SO_TIMESTAMPNS : the two modes are
mutually exclusive.

sock_recv_timestamp() became too big to be fully inlined so I added a
__sock_recv_timestamp() helper function.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
CC: linux-arch@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:21 -07:00
Stephen Hemminger
e71a4783aa [NET] core: whitespace cleanup
Fix whitespace around keywords. Fix indentation especially of switch
statements.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:09 -07:00
Eric Dumazet
ae40eb1ef3 [NET]: Introduce SIOCGSTAMPNS ioctl to get timestamps with nanosec resolution
Now network timestamps use ktime_t infrastructure, we can add a new
ioctl() SIOCGSTAMPNS command to get timestamps in 'struct timespec'.
User programs can thus access to nanosecond resolution.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
CC: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:24:04 -07:00
Eric Dumazet
b7aa0bf70c [NET]: convert network timestamps to ktime_t
We currently use a special structure (struct skb_timeval) and plain
'struct timeval' to store packet timestamps in sk_buffs and struct
sock.

This has some drawbacks :
- Fixed resolution of micro second.
- Waste of space on 64bit platforms where sizeof(struct timeval)=16

I suggest using ktime_t that is a nice abstraction of high resolution
time services, currently capable of nanosecond resolution.

As sizeof(ktime_t) is 8 bytes, using ktime_t in 'struct sock' permits
a 8 byte shrink of this structure on 64bit architectures. Some other
structures also benefit from this size reduction (struct ipq in
ipv4/ip_fragment.c, struct frag_queue in ipv6/reassembly.c, ...)

Once this ktime infrastructure adopted, we can more easily provide
nanosecond resolution on top of it. (ioctl SIOCGSTAMPNS and/or
SO_TIMESTAMPNS/SCM_TIMESTAMPNS)

Note : this patch includes a bug correction in
compat_sock_get_timestamp() where a "err = 0;" was missing (so this
syscall returned -ENOENT instead of 0)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
CC: Stephen Hemminger <shemminger@linux-foundation.org>
CC: John find <linux.kernel@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:34 -07:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
YOSHIFUJI Hideaki
4768fbcbcf [NET]: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:27 -08:00
Miklos Szeredi
effee6a000 [NET]: File descriptor loss while receiving SCM_RIGHTS
If more than one file descriptor was sent with an SCM_RIGHTS message,
and on the receiving end, after installing a nonzero (but not all)
file descritpors the process runs out of fds, then the already
installed fds will be lost (userspace will have no way of knowing
about them).

The following patch makes sure, that at least the already installed
fds are sent to userspace.  It doesn't solve the issue of losing file
descriptors in case of an EFAULT on the userspace buffer.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-11 23:59:48 -07:00
Dmitry Mishin
2722971cbe [NETFILTER]: iptables 32bit compat layer
This patch extends current iptables compatibility layer in order to get
32bit iptables to work on 64bit kernel. Current layer is insufficient due
to alignment checks both in kernel and user space tools.

Patch is for current net-2.6.17 with addition of move of ipt_entry_{match|
target} definitions to xt_entry_{match|target}.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Acked-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 02:25:19 -08:00
Shaun Pereira
f0ac261441 [NET]: socket timestamp 32 bit handler for 64 bit kernel
Get socket timestamp handler function that does not use the
ioctl32_hash_table.

Signed-off-by: Shaun Pereira <spereira@tusc.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 23:59:39 -08:00
Dmitry Mishin
3fdadf7d27 [NET]: {get|set}sockopt compatibility layer
This patch extends {get|set}sockopt compatibility layer in order to
move protocol specific parts to their place and avoid huge universal
net/compat.c file in the future.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:45:21 -08:00
Al Viro
8920e8f94c [PATCH] Fix 32bit sendmsg() flaw
When we copy 32bit ->msg_control contents to kernel, we walk the same
userland data twice without sanity checks on the second pass.

Second version of this patch: the original broke with 64-bit arches
running 32-bit-compat-mode executables doing sendmsg() syscalls with
unaligned CMSG data areas

Another thing is that we use kmalloc() to allocate and sock_kfree_s()
to free afterwards; less serious, but also needs fixing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 08:14:11 -07:00
Andrew Morton
d64d387372 [NET]: Fix memory leak in sys_{send,recv}msg() w/compat
From: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com>

sendmsg()/recvmsg() syscalls from o32/n32 apps to a 64bit kernel will
cause a kernel memory leak if iov_len > UIO_FASTIOV for each syscall!

This is because both sys_sendmsg() and verify_compat_iovec() kmalloc a
new iovec structure.  Only the one from sys_sendmsg() is free'ed.

I wrote a simple test program to confirm this after identifying the
problem:

http://davej.org/programs/testsendmsg.c

Note that the below fix will break solaris_sendmsg()/solaris_recvmsg() as
it also calls verify_compat_iovec() but expects it to malloc internally.

[ I fixed that. -DaveM ]

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 15:29:19 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00