Commit Graph

64 Commits

Author SHA1 Message Date
Linus Torvalds
769d9968e4 Revert "PCI: update bridge resources to get more big ranges in PCI assign unssigned"
This reverts commit 977d17bb17, because it
can cause problems with some devices not getting any resources at all
when the resource tree is re-allocated.

For an example of this, see

	https://bugzilla.kernel.org/show_bug.cgi?id=15960
	(originally https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4982)
	(lkml thread: http://lkml.org/lkml/2010/4/19/20)

where Peter Henriksson reported his Xonar DX sound card gone, because
the IO port region was no longer allocated.

Reported-bisected-and-tested-by: Peter Henriksson <peter.henriksson@gmail.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Requested-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-12 18:39:45 -07:00
Yinghai Lu
9a928660c9 pci: don't reassign to ROM res if it is not going to be enabled
A ROM resource that doesn't fit should not cause us to try to re-assign
all the bus resources.  Nobody generally cares, and re-assigning is
going to just cause way more troubles than it tries to solve.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-01 07:41:55 -08:00
Bjorn Helgaas
89a74ecccd PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
No functional change; this converts loops that iterate from 0 to
PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the
pci_bus_for_each_resource() iterator instead.

This doesn't change the way resources are stored; it merely removes
dependencies on the fact that they're in a table.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-23 09:43:31 -08:00
Yinghai Lu
9958610552 PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges
Make pci_bridge_check_ranges() store the PCI_PREF_RANGE_TYPE_64 in
addition to IORESOURCE_MEM_64.  Just like pci_read_bridge_bases().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:25 -08:00
Yinghai Lu
32180e402f PCI: pciehp: second try to get big range for pcie devices
Handle the case where the slot bridge that doesn't get a pre-allocated
resource big enough to handle its child resources..  For example pcie
devices need 256M, but the bridge only gets 2M preallocated.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:25 -08:00
Yinghai Lu
6841ec681a PCI: introduce pci_assign_unassigned_bridge_resources
For use by pciehp.

pci_setup_bridge() will not check enabled for the slot bridge, otherwise
update res is not updated to bridge BAR.  That is, bridge is already
enabled for port service.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:23 -08:00
Yinghai Lu
977d17bb17 PCI: update bridge resources to get more big ranges in PCI assign unssigned
BIOS separates IO ranges between several IOHs, and on some slots, BIOS assigns
resources to a bridge, but stops assigning resources to the device under that
bridge, because the device needs a big resource.

So:
  1. allocate resources and record the failed device resources
  2. clear the BIOS assigned resources of the parent bridge of failing device
  3. go back and call pci assign unassigned
  4. if it still fails, go up the tree, clear more bridges. and try again

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:22 -08:00
Yinghai Lu
d65245c329 PCI: don't shrink bridge resources
When clearing leaf bridge resources, trying to get a big enough one, we
could shrink the bridge if there is no resource under it.  Confirm
against the old resource side to make sure we're increasing the
allocation.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:21 -08:00
Yinghai Lu
568ddef873 PCI: add failed_list to pci_bus_assign_resources
This allows us to track failed allocations for later re-trying with
reallocation.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:20 -08:00
Yinghai Lu
5009b46025 PCI: add pci_bridge_release_resources and pci_bus_release_bridge_resources
We use this in later patches to free resrouce ranges for reassignment in
an effort to support a wider variety of PCI topologies.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:19 -08:00
Yinghai Lu
7c9342b8dd PCI: don't dump resource when bus resource flags indicates unused
Don't print out resources without flags to avoid cluttering up the debug
output.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:17:00 -08:00
Yinghai Lu
7cc5997d1d PCI: separate pci_setup_bridge to small functions
This is a good cleanup in itself, and makes it easier to modify specific
resource types in later code.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:16:59 -08:00
Alex Williamson
59353ea30e PCI: Always set prefetchable base/limit upper32 registers
Prior to 1f82de10 we always initialized the upper 32bits of the
prefetchable memory window, regardless of the address range used.
Now we only touch it for a >32bit address, which means the upper32
registers remain whatever the BIOS initialized them too.

It's valid for the BIOS to set the upper32 base/limit to
0xffffffff/0x00000000, which makes us program prefetchable ranges
like 0xffffffffabc00000 - 0x00000000abc00000

Revert the chunk of 1f82de10 that made this conditional so we always
write the upper32 registers and remove now unused pref_mem64 variable.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04 15:52:43 -08:00
Bjorn Helgaas
865df576e8 PCI: improve discovery/configuration messages
This makes PCI resource management messages more consistent and adds a few
new messages to aid debugging.

Whenever we assign resources to a device, update a BAR, or change a
bridge aperture, it's worth noting it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:44 -08:00
Bjorn Helgaas
c7dabef8a2 vsprintf: use %pR, %pr instead of %pRt, %pRf
Jesse accidentally applied v1 [1] of the patchset instead of v2 [2].  This
is the diff between v1 and v2.

The changes in this patch are:
    - tidied vsprintf stack buffer to shrink and compute size more
      accurately
    - use %pR for decoding and %pr for "raw" (with type and flags) instead
      of adding %pRt and %pRf

[1] http://lkml.org/lkml/2009/10/6/491
[2] http://lkml.org/lkml/2009/10/13/441

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 13:06:41 -08:00
Bjorn Helgaas
a369c791e8 PCI: print resources consistently with %pRt
This uses %pRt to print additional resource information (type, size,
prefetchability, etc.) consistently.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04 08:47:18 -08:00
Jesse Barnes
55a1098476 Revert "PCI: get larger bridge ranges when space is available"
This reverts commit 308cf8e13f.  This
patch had trouble with transparent bridges, among other things.  A more
readable and correct version should land in 2.6.33.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-27 09:39:18 -07:00
Yinghai Lu
308cf8e13f PCI: get larger bridge ranges when space is available
Found one system:
[   71.120590] pci 0000:40:05.0: scanning behind bridge, config 4f4a40, pass 0
[   71.138283] PCI: Scanning bus 0000:4a
[   71.140341] pci 0000:4a:00.0: found [15b3:6278] class 000c06 header type 00
[   71.157173] pci 0000:4a:00.0: reg 10 64bit mmio: [0x000000-0x0fffff]
[   71.161697] pci 0000:4a:00.0: reg 18 64bit mmio pref: [0x000000-0x7fffff]
[   71.179403] pci 0000:4a:00.0: reg 20 64bit mmio pref: [0x000000-0xfffffff]
[   71.185366] pci 0000:4a:00.0: calling quirk_resource_alignment+0x0/0x1dd
[   71.200846] pci 0000:4a:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[   71.219623] PCI: Fixups for bus 0000:4a
[   71.222194] pci 0000:40:05.0: bridge 32bit mmio: [0xcf000000-0xcf0fffff]
[   71.238662] pci 0000:40:05.0: bridge 64bit mmio pref: [0xcd800000-0xcdffffff]
[   71.255793] PCI: Bus scan for 0000:4a returning with max=4a

Device needs a big pref mmio, but BIOS doesn't allocate mmio to it aside
from a small MMIO range.  Later, the kernel will not allocate resources to
that to the device:
[   99.574030] pci 0000:4a:00.0: BAR 4: can't allocate mem resource [0xd0000000-0xcdffffff]
[   99.580102] pci 0000:4a:00.0: BAR 2: got res [0xcd800000-0xcdffffff] bus [0xcd800000-0xcdffffff] flags 0x12120c
[   99.602307] pci 0000:4a:00.0: BAR 2: moved to bus [0xcd800000-0xcdffffff] flags 0x12120c
[   99.615991] pci 0000:4a:00.0: BAR 0: got res [0xcf000000-0xcf0fffff] bus [0xcf000000-0xcf0fffff] flags 0x120204
[   99.634499] pci 0000:4a:00.0: BAR 0: moved to bus [0xcf000000-0xcf0fffff] flags 0x120204
[   99.654318] pci 0000:40:05.0: PCI bridge, secondary bus 0000:4a
[   99.658766] pci 0000:40:05.0:   IO window: disabled
[   99.675478] pci 0000:40:05.0:   MEM window: 0xcf000000-0xcf0fffff
[   99.681663] pci 0000:40:05.0:   PREFETCH window: 0x000000cd800000-0x000000cdffffff

So try to get a big range in the pci bridge if there is no child using
that range.  With the patch we get:
[   99.104525] pci 0000:4a:00.0: BAR 4: got res [0xfc080000000-0xfc08fffffff] bus [0xfc080000000-0xfc08fffffff] flags 0x12120c
[   99.123624] pci 0000:4a:00.0: BAR 4: moved to bus [0xfc080000000-0xfc08fffffff] flags 0x12120c
[   99.131977] pci 0000:4a:00.0: BAR 2: got res [0xfc090000000-0xfc0907fffff] bus [0xfc090000000-0xfc0907fffff] flags 0x12120c
[   99.149788] pci 0000:4a:00.0: BAR 2: moved to bus [0xfc090000000-0xfc0907fffff] flags 0x12120c
[   99.169248] pci 0000:4a:00.0: BAR 0: got res [0xc0200000-0xc02fffff] bus [0xc0200000-0xc02fffff] flags 0x120204
[   99.189508] pci 0000:4a:00.0: BAR 0: moved to bus [0xc0200000-0xc02fffff] flags 0x120204
[   99.206402] pci 0000:40:05.0: PCI bridge, secondary bus 0000:4a
[   99.210637] pci 0000:40:05.0:   IO window: disabled
[   99.224856] pci 0000:40:05.0:   MEM window: 0xc0200000-0xc03fffff
[   99.230019] pci 0000:40:05.0:   PREFETCH window: 0x000fc080000000-0x000fc097ffffff

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-07 09:28:18 -07:00
Eric W. Biederman
28760489a3 PCI: pcie: Ensure hotplug ports have a minimum number of resources
In general a BIOS may goof or we may hotplug in a hotplug controller.
In either case the kernel needs to reserve resources for plugging
in more devices in the future instead of creating a minimal resource
assignment.

We already do this for cardbus bridges I am just adding a variant
for pcie bridges.

v2: Make testing for pcie hotplug bridges based on a flag.

    So far we only set the flag for pcie but a header_quirk
    could easily be added for the non-standard pci hotplug
    bridges.

Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 14:10:24 -07:00
Chris Wright
6faf17f6f1 PCI SR-IOV: correct broken resource alignment calculations
An SR-IOV capable device includes an SR-IOV PCIe capability which
describes the Virtual Function (VF) BAR requirements.  A typical SR-IOV
device can support multiple VFs whose BARs must be in a contiguous region,
effectively an array of VF BARs.  The BAR reports the size requirement
for a single VF.  We calculate the full range needed by simply multiplying
the VF BAR size with the number of possible VFs and create a resource
spanning the full range.

This all seems sane enough except it artificially inflates the alignment
requirement for the VF BAR.  The VF BAR need only be aligned to the size
of a single BAR not the contiguous range of VF BARs.  This can cause us
to fail to allocate resources for the BAR despite the fact that we
actually have enough space.

This patch adds a thin PCI specific layer over the generic
resource_alignment() function which is aware of the special nature of
VF BARs and does sorting and allocation based on the smaller alignment
requirement.

I recognize that while resource_alignment is generic, it's basically a
PCI helper.  An alternative to this patch is to add PCI VF BAR specific
information to struct resource.  I opted for the extra layer rather than
adding such PCI specific information to struct resource.  This does
have the slight downside that we don't cache the BAR size and re-read
for each alignment query (happens a small handful of times during boot
for each VF BAR).

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-30 08:37:25 -07:00
Yinghai Lu
d09ee9687e PCI: improve resource allocation under transparent bridges
We could run out of space under under 4g, but devices under transparent
bridges can use 64bit resources, so keep trying on the parent bus until
we hit a non-transparent bridge.

Impact: better support for assigning unassigned resources

Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:07 -07:00
Yinghai Lu
1f82de10d6 PCI/x86: don't assume prefetchable ranges are 64bit
We should not assign 64bit ranges to PCI devices that only take 32bit
prefetchable addresses.

Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge
and make the bus resource only have that bit set when all devices under
it support 64bit prefetchable memory.  Use that flag to allocate
resources from that range.

Reported-by: Yannick <yannick.roehlly@free.fr>
Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:06 -07:00
Yinghai Lu
681bf59721 PCI: cleanup debug output resources
Remove outputs for 0 sized resources and indicate prefetchability.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:49:25 -07:00
Yuji Shimada
296ccb086d PCI: Setup disabled bridges even if buses are added
This patch sets up disabled bridges even if buses have already been
added.

pci_assign_unassigned_resources is called after buses are added.
pci_assign_unassigned_resources calls pci_bus_assign_resources.
pci_bus_assign_resources calls pci_setup_bridge to configure BARs of
bridges.

Currently pci_setup_bridge returns immediately if the bus have already
been added. So pci_assign_unassigned_resources can't configure BARs of
bridges that were added in a disabled state; this patch fixes the issue.

On logical hot-add, we need to prevent the kernel from re-initializing
bridges that have already been initialized. To achieve this,
pci_setup_bridge returns immediately if the bridge have already been
enabled.

We don't need to check whether the specified bus is a root bus or not.
pci_setup_bridge is not called on a root bus, because a root bus does
not have a bridge.

The patch adds a new helper function, pci_is_enabled. I made the
function name similar to pci_is_managed. The codes which use
enable_cnt directly are changed to use pci_is_enabled.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:25:06 -07:00
Alex Chiang
b73e97d95c PCI: do not initialize bridges more than once
In preparation for PCI core hotplug, we need to ensure that we do
not attempt to re-initialize bridges that have already been initialized.

We only need to worry about non-root buses, since we will not allow
root bus removal.

Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:32 -07:00
Andrew Morton
ea7415512a PCI: constify pci_bus_assign_resources()
drivers/pci/hotplug/fakephp.c: In function 'pci_rescan_bus':
drivers/pci/hotplug/fakephp.c:271: warning: passing argument 1 of 'pci_bus_assign_resources' discards qualifiers from pointer target type

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:35 -07:00
Bjorn Helgaas
a19f5df7d9 PCI: use dev_printk for PCI bus resource mssages
Since pci_bus has a struct device, use dev_printk directly instead
of faking it by hand.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:19 -08:00
Bjorn Helgaas
29935282f2 PCI: make PCI bus resource messages more meaningful
Change PCI bus resource messages so they have a bit more context
and look like the rest of PCI, e.g.,

    - bus: 00 index 0 io port: [0x00-0xffff]
    - bus: 00 index 1 mmio: [0x000000-0xffffffff]
    + pci 0000:00: bus resource 0 io : [0x00-0xffff]
    + pci 0000:00: bus resource 1 mem: [0x000000-0xffffffff]

This also changes them from KERN_INFO to KERN_DEBUG.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:44 -08:00
Zhao, Yu
022edd86d7 PCI: use resource_size() everywhere.
This is a cleanup that replaces the resource calculation formula with
resource_size().

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:54:28 -07:00
Benjamin Herrenschmidt
096e6f673d pci: Use new %pR to print resource ranges
This converts things in drivers/pci to use %pR to printout the
content of a struct resource instead of hand-casted %llx or
other variants.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 09:12:32 -07:00
Ingo Molnar
6b2ada8210 Merge branches 'core/softlockup', 'core/softirq', 'core/resources', 'core/printk' and 'core/misc' into core-v28-for-linus 2008-10-15 12:48:44 +02:00
Jeremy Fitzhardinge
8308c54d7e generic: redefine resource_size_t as phys_addr_t
There's no good reason why a resource_size_t shouldn't just be a
physical address, so simply redefine it in terms of phys_addr_t.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14 17:24:27 +02:00
Linus Torvalds
0cb60efd03 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: re-add debug prints for unmodified BARs
  PCI: fix pciehp_free_irq()
  PCI Hotplug: fakephp: fix deadlock... again
  PCI: Fix printk warnings in setup-bus.c
  PCI: Fix printk warnings in probe.c
  PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets
2008-09-13 14:47:33 -07:00
Johann Felix Soden
53bc88701b PCI: Fix printk warnings in setup-bus.c
Again, the cleaned up code introduced some resource warnings:
drivers/pci/setup-bus.c: In function 'pci_bus_dump_res':
drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t'
drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'resource_size_t'

Fix those up too.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-09-09 11:43:38 -07:00
Linus Torvalds
5f17cfce57 PCI: fix pbus_size_mem() resource alignment for CardBus controllers
Commit 884525655d ("PCI: clean up resource
alignment management") changed the resource handling to mark how a
resource was aligned on a per-resource basis.

Thus, instead of looking at the resource number to determine whether it
was a bridge resource or a regular resource (they have different
alignment rules), we should just ask the resource for its alignment
directly.

The reason this broke only cardbus resources was that for the other
types of resources, the old way of deciding alignment actually still
happened to work.  But CardBus bridge resources had been changed by
commit 934b7024f0 ("Fix cardbus resource
allocation") to look more like regular resources than PCI bridge
resources from an alignment handling standpoint.

Reported-and-tested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-04 01:33:59 -07:00
Ingo Molnar
0679c2f47d Merge branch 'linus' into pci-for-jesse 2008-07-18 22:39:59 +02:00
Bjorn Helgaas
80ccba1186 PCI: use dev_printk when possible
Convert printks to use dev_printk().

I converted pr_debug() to dev_dbg().  Both use KERN_DEBUG and are enabled
only when DEBUG is defined.

I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(),
because dev_dbg() is only enabled when DEBUG is defined.

I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info().  The DBG()
name makes it sound like debug, but it's been enabled forever, so dev_info()
preserves the previous behavior.

I tried to make the resource assignment formats more consistent, e.g.,
  "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n"
instead of sometimes using "start-end" and sometimes using "size@start".
I'm not attached to one or the other; I'd just like them consistent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-25 16:05:13 -07:00
Yinghai Lu
76fbc263ff pci: debug extra pci bus resources
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23 21:57:21 +02:00
Linus Torvalds
934b7024f0 Fix cardbus resource allocation
Commit 884525655d ("PCI: clean up resource
alignment management") didn't set the alignment information for the
cardbus window resources, causing their subsequent allocations to fail
miserably with a message like

  yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions
  yenta_cardbus: probe of 0000:15:00.0 failed with error -16

or similar.

This fixes it and clarifies the code a bit too (we used to have to use
the insane PCI bridge alignment logic that put the alignment in the
"start" field, this makes it use the slightly easier-to-understand
size-based alignment, and allows us to set the resource start to zero
until it gets allocated).

Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-22 18:16:30 -07:00
Adrian Bunk
a391f19717 PCI: pci_setup_bridge() mustn't be __devinit
WARNING: drivers/pci/built-in.o(.text+0x28ee9): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:13 -07:00
Adrian Bunk
5468ae6170 PCI: pci_bus_size_cardbus() mustn't be __devinit
WARNING: drivers/pci/built-in.o(.text+0x28e1f): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:12 -07:00
Ivan Kokshaysky
884525655d PCI: clean up resource alignment management
Done per Linus' request and suggestions. Linus has explained that
better than I'll be able to explain:

On Thu, Mar 27, 2008 at 10:12:10AM -0700, Linus Torvalds wrote:
> Actually, before we go any further, there might be a less intrusive
> alternative: add just a couple of flags to the resource flags field (we
> still have something like 8 unused bits on 32-bit), and use those to
> implement a generic "resource_alignment()" routine.
>
> Two flags would do it:
>
>  - IORESOURCE_SIZEALIGN: size indicates alignment (regular PCI device
>    resources)
>
>  - IORESOURCE_STARTALIGN: start field is alignment (PCI bus resources
>    during probing)
>
> and then the case of both flags zero (or both bits set) would actually be
> "invalid", and we would also clear the IORESOURCE_STARTALIGN flag when we
> actually allocate the resource (so that we don't use the "start" field as
> alignment incorrectly when it no longer indicates alignment).
>
> That wouldn't be totally generic, but it would have the nice property of
> automatically at least add sanity checking for that whole "res->start has
> the odd meaning of 'alignment' during probing" and remove the need for a
> new field, and it would allow us to have a generic "resource_alignment()"
> routine that just gets a resource pointer.

Besides, I removed IORESOURCE_BUS_HAS_VGA flag which was unused for ages.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:08 -07:00
Linus Torvalds
12c22d6ef2 Revert "PCI: remove transparent bridge sizing"
This reverts commit 8fa5913d54, which
caused various interesting problems for people, including wrong resource
allocations.  See for example bugzilla entry "2.6.25-rc2: ohci1394
problem (MMIO broken)" at

	http://bugzilla.kernel.org/show_bug.cgi?id=10080

And Gary Hade says:

 "The same change had also exposed an issue reported by Paul Martin that
  has been causing an Oops while hotplugging ThinkPads to a ThinkPad
  Dock II.  See

	http://lkml.org/lkml/2008/2/19/405
	http://bugzilla.kernel.org/show_bug.cgi?id=9961

  I have a fix for the ThinkPad docking Oops but if the issue being
  discussed here is caused by the transparent bridge sizing removal
  change I totally agree that it should be reverted."

  The transparent bridge sizing removal change was motivated by
  insufficient PCI memory resource for a transparent bridge window that
  was being created as a result of expansion ROM(s) being included in
  the transparent bridge sizing calculations.

  A later "PCI: Remove default PCI expansion ROM memory allocation"
  change ( re: http://lkml.org/lkml/2007/12/11/361 ) removes the
  expansion ROM(s) from the transparent bridge sizing calculations which
  actually resolves the original issue in a different manner.  So, even
  if the "PCI: remove transparent bridge sizing" is not problematic it
  is no longer needed anyway."

Identified-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Gary Hade <garyhade@us.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-26 11:22:40 -07:00
Andrew Morton
13d36c2483 PCI: fix up setup-bus.c #ifdef
Use upper_32_bits(): no code changes, one less ifdef.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:34:38 -08:00
Sam Ravnborg
451124a7cc PCI: fix 4x section mismatch warnings
The following warnings were issued during build of
drivers/pci with an allyesconfig build:
WARNING: o-x86_64/drivers/pci/built-in.o(.text+0xdaf): Section mismatch in reference from the function pci_add_new_bus() to the function .devinit.text:pci_alloc_child_bus()
WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x15e2): Section mismatch in reference from the function pci_scan_single_device() to the function .devinit.text:pci_scan_device()
WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x1b0c5): Section mismatch in reference from the function pci_bus_assign_resources() to the function .devinit.text:pci_setup_bridge()
WARNING: o-x86_64/drivers/pci/built-in.o(.text+0x1b32d): Section mismatch in reference from the function pci_bus_size_bridges() to the function .devinit.text:pci_bus_size_cardbus()

Investigating each case closer it looked like all
referred functions are only used in the init phase
or during hotplug.
So to avoid wasting too much memory in the non-hotplug
case the simpler fix was to allow the fuctions to
use code/data from the __devinit sections.
This was done in all four case by adding the __ref
annotation.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02 15:08:04 -08:00
Benjamin Herrenschmidt
c40a22e0ce PCI: Fix bus resource assignment on 32 bits with 64b resources
The current pci_assign_unassigned_resources() code doesn't work properly
on 32 bits platforms with 64 bits resources. The main reason is the use
of unsigned long in various places instead of resource_size_t.

This is a pre-requisite for making powerpc use the generic code instead of
its own half-useful implementation.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:25 -08:00
Gary Hade
8fa5913d54 PCI: remove transparent bridge sizing
Remove transparent bridge sizing.

Due to code in pci_read_bridge_bases() [drivers/pci/probe.c] the child
bus of a transparent bridge already has access to the parent bus
resources so transparent bridge sizing appears unnecessary.  The bridge
sizing includes alignment and granularity adjustments that can cause
significantly more memory to be reserved from the parant bus than
required by devices on the child bus and allotted by _CRS.

Signed-off-by: Gary Hade <gary.hade@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
Milind Arun Choudhary
6f6f8c2f4b PCI: ROUND_UP macro cleanup in drivers/pci
ROUND_UP macro cleanup, use ALIGN where ever appropriate

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Acked-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Sam Ravnborg
96bde06a2d pci: do not mark exported functions as __devinit
Functions marked __devinit will be removed after kernel init.  But being
exported they are potentially called by a module much later.

So the safer choice seems to be to keep the function even in the non
CONFIG_HOTPLUG case.

This silence the follwoing section mismatch warnings:
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Atsushi Nemoto
4516a618a7 PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options
CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size might
result in allocation failure for the reserving itself on some platforms
(for example typical 32bit MIPS).  Make it (and CARDBUS_IO_SIZE too)
customizable by "pci=" option for such platforms.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00