Commit Graph

4546 Commits

Author SHA1 Message Date
Linus Torvalds
1d9b9f6a53 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: use dev_printk when possible
  PCI: add D3 power state avoidance quirk
  PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
  PCI: add an option to allow ASPM enabled forcibly
  PCI: disable ASPM on pre-1.1 PCIe devices
  PCI: disable ASPM per ACPI FADT setting
  PCI MSI: Don't disable MSIs if the mask bit isn't supported
  PCI: handle 64-bit resources better on 32-bit machines
  PCI: rewrite PCI BAR reading code
  PCI: document pci_target_state
  PCI hotplug: fix typo in pcie hotplug output
  x86 gart: replace to_pages macro with iommu_num_pages
  x86, AMD IOMMU: replace to_pages macro with iommu_num_pages
  iommu: add iommu_num_pages helper function
  dma-coherent: add documentation to new interfaces
  Cris: convert to using generic dma-coherent mem allocator
  Sh: use generic per-device coherent dma allocator
  ARM: support generic per-device coherent dma mem
  Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE
  x86: use generic per-device dma coherent allocator
  ...
2008-07-28 18:14:24 -07:00
Andrea Arcangeli
cddb8a5c14 mmu-notifiers: core
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   ->invalidate_page notification (invalidate_range_begin/end works on
   ranges and ->invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);

+       kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:21 -07:00
Ingo Molnar
cb28a1bbdb Merge branch 'linus' into core/generic-dma-coherent
Conflicts:

	arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-29 00:07:55 +02:00
Ingo Molnar
9e3ee1c39c Merge branch 'linus' into cpus4096
Conflicts:

	kernel/stop_machine.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 23:32:00 +02:00
Linus Torvalds
e56b3bc794 cpu masks: optimize and clean up cpumask_of_cpu()
Clean up and optimize cpumask_of_cpu(), by sharing all the zero words.

Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns
creating a huge array of constant bitmasks, realize that the zero words
can be shared.

In other words, on a 64-bit architecture, we only ever need 64 of these
arrays - with a different bit set in one single world (with enough zero
words around it so that we can create any bitmask by just offsetting in
that big array). And then we just put enough zeroes around it that we
can point every single cpumask to be one of those things.

So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each,
with one bit set in each array - 2MB memory total), we have exactly 64
arrays instead, each 8k bits in size (64kB total).

And then we just point cpumask(n) to the right position (which we can
calculate dynamically). Once we have the right arrays, getting
"cpumask(n)" ends up being:

  static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
  {
          const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
          p -= cpu / BITS_PER_LONG;
          return (const cpumask_t *)p;
  }

This brings other advantages and simplifications as well:

 - we are not wasting memory that is just filled with a single bit in
   various different places

 - we don't need all those games to re-create the arrays in some dense
   format, because they're already going to be dense enough.

if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory
is a non-issue (especially since by doing this "overlapping" trick we
probably get better cache behaviour anyway).

[ mingo@elte.hu:

  Converted Linus's mails into a commit. See:

     http://lkml.org/lkml/2008/7/27/156
     http://lkml.org/lkml/2008/7/28/320

  Also applied a family filter - which also has the side-effect of leaving
  out the bits where Linus calls me an idio... Oh, never mind ;-)
]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 22:20:41 +02:00
Ingo Molnar
414f746d23 Merge branch 'linus' into cpus4096 2008-07-28 21:14:43 +02:00
Linus Torvalds
37eaf8c746 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: fix up ftrace.c
  stop_machine: Wean existing callers off stop_machine_run()
  stop_machine(): stop_machine_run() changed to use cpu mask
  Hotplug CPU: don't check cpu_online after take_cpu_down
  Simplify stop_machine
  stop_machine: add ALL_CPUS option
  module: fix build warning with !CONFIG_KALLSYMS
2008-07-28 08:37:46 -07:00
Rusty Russell
784e2d7600 stop_machine: fix up ftrace.c
Simple conversion.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
2008-07-28 12:16:31 +10:00
Rusty Russell
9b1a4d3837 stop_machine: Wean existing callers off stop_machine_run()
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-28 12:16:31 +10:00
Rusty Russell
eeec4fad96 stop_machine(): stop_machine_run() changed to use cpu mask
Instead of a "cpu" arg with magic values NR_CPUS (any cpu) and ~0 (all
cpus), pass a cpumask_t.  Allow NULL for the common case (where we
don't care which CPU the function is run on): temporary cpumask_t's
are usually considered bad for stack space.

This deprecates stop_machine_run, to be removed soon when all the
callers are dead.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-28 12:16:30 +10:00
Rusty Russell
0432158758 Hotplug CPU: don't check cpu_online after take_cpu_down
Akinobu points out that if take_cpu_down() succeeds, the cpu must be offline.
Remove the cpu_online() check, and put a BUG_ON().

Quoting Akinobu Mita:
   Actually the cpu_online() check was necessary before appling this
   stop_machine: simplify patch.

   With old __stop_machine_run(), __stop_machine_run() could succeed
   (return !IS_ERR(p) value) even if take_cpu_down() returned non-zero value.
   The return value of take_cpu_down() was obtained through kthread_stop()..

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Akinobu Mita" <akinobu.mita@gmail.com>
2008-07-28 12:16:29 +10:00
Rusty Russell
ffdb5976c4 Simplify stop_machine
stop_machine creates a kthread which creates kernel threads.  We can
create those threads directly and simplify things a little.  Some care
must be taken with CPU hotunplug, which has special needs, but that code
seems more robust than it was in the past.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-07-28 12:16:29 +10:00
Jason Baron
5c2aed6225 stop_machine: add ALL_CPUS option
-allow stop_mahcine_run() to call a function on all cpus. Calling
 stop_machine_run() with a 'ALL_CPUS' invokes this new behavior.
 stop_machine_run() proceeds as normal until the calling cpu has
 invoked 'fn'. Then, we tell all the other cpus to call 'fn'.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Adrian Bunk <bunk@stusta.de>
CC: Andi Kleen <andi@firstfloor.org>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: mingo@elte.hu
CC: akpm@osdl.org
2008-07-28 12:16:28 +10:00
WANG Cong
15bba37d62 module: fix build warning with !CONFIG_KALLSYMS
This patch fixed the warning:

  CC      kernel/module.o
  /home/wangcong/Projects/linux-2.6/kernel/module.c:332: warning:
‘lookup_symbol’ defined but not used

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-28 12:16:28 +10:00
Andrea Righi
940389b8af task IO accounting: move all IO statistics in struct task_io_accounting
Simplify the code of include/linux/task_io_accounting.h.

It is also more reasonable to have all the task i/o-related statistics in a
single struct (task_io_accounting).

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27 16:12:28 -07:00
Andrea Righi
5995477ab7 task IO accounting: improve code readability
Put all i/o statistics in struct proc_io_accounting and use inline functions to
initialize and increment statistics, removing a lot of single variable
assignments.

This also reduces the kernel size as following (with CONFIG_TASK_XACCT=y and
CONFIG_TASK_IO_ACCOUNTING=y).

    text    data     bss     dec     hex filename
   11651       0       0   11651    2d83 kernel/exit.o.before
   11619       0       0   11619    2d63 kernel/exit.o.after
   10886     132     136   11154    2b92 kernel/fork.o.before
   10758     132     136   11026    2b12 kernel/fork.o.after

 3082029  807968 4818600 8708597  84e1f5 vmlinux.o.before
 3081869  807968 4818600 8708437  84e155 vmlinux.o.after

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27 09:58:20 -07:00
Andrea Righi
605ccb73f6 tracing: remove unused variable
Remove the following warning with CONFIG_TRACING=y:

	kernel/trace/trace.c: In function ‘s_next’:
	kernel/trace/trace.c:1186: warning: unused variable ‘last_ent’

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27 09:58:20 -07:00
Al Viro
bfbcf03479 lost sysctl fix
try_attach() should walk into the matching subdirectory, not the first one...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Valdis.Kletnieks@vt.edu
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27 09:45:34 -07:00
Al Viro
3f8206d496 [PATCH] get rid of indirect users of namei.h
fs.h needs path.h, not namei.h; nfs_fs.h doesn't need it at all.
Several places in the tree needed direct include.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:42 -04:00
Al Viro
7f2da1e7d0 [PATCH] kill altroot
long overdue...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:20 -04:00
Al Viro
e6305c43ed [PATCH] sanitize ->permission() prototype
* kill nameidata * argument; map the 3 bits in ->flags anybody cares
  about to new MAY_... ones and pass with the mask.
* kill redundant gfs2_iop_permission()
* sanitize ecryptfs_permission()
* fix remaining places where ->permission() instances might barf on new
  MAY_... found in mask.

The obvious next target in that direction is permission(9)

folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:14 -04:00
Al Viro
9043476f72 [PATCH] sanitize proc_sysctl
* keep references to ctl_table_head and ctl_table in /proc/sys inodes
* grab the former during operations, use the latter for access to
  entry if that succeeds
* have ->d_compare() check if table should be seen for one who does lookup;
  that allows us to avoid flipping inodes - if we have the same name resolve
  to different things, we'll just keep several dentries and ->d_compare()
  will reject the wrong ones.
* have ->lookup() and ->readdir() scan the table of our inode first, then
  walk all ctl_table_header and scan ->attached_by for those that are
  attached to our directory.
* implement ->getattr().
* get rid of insane amounts of tree-walking
* get rid of the need to know dentry in ->permission() and of the contortions
  induced by that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:12 -04:00
Al Viro
ae7edecc9b [PATCH] sysctl: keep track of tree relationships
In a sense, that's the heart of the series.  It's based on the following
property of the trees we are actually asked to add: they can be split into
stem that is already covered by registered trees and crown that is entirely
new.  IOW, if a/b and a/c/d are introduced by our tree, then a/c is also
introduced by it.

That allows to associate tree and table entry with each node in the union;
while directory nodes might be covered by many trees, only one will cover
the node by its crown.  And that will allow much saner logics for /proc/sys
in the next patches.  This patch introduces the data structures needed to
keep track of that.

When adding a sysctl table, we find a "parent" one.  Which is to say,
find the deepest node on its stem that already is present in one of the
tables from our table set or its ancestor sets.  That table will be our
parent and that node in it - attachment point.  Add our table to list
anchored in parent, have it refer the parent and contents of attachment
point.  Also remember where its crown lives.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:11 -04:00
Al Viro
f7e6ced406 [PATCH] allow delayed freeing of ctl_table_header
Refcount the sucker; instead of freeing it by the end of unregistration
just drop the refcount and free only when it hits zero.  Make sure that
we _always_ make ->unregistering non-NULL in start_unregistering().

That allows anybody to get a reference to such puppy, preventing its
freeing and reuse.  It does *not* block unregistration.  Anybody who
holds such a reference can
	* try to grab a "use" reference (ctl_head_grab()); that will
succeeds if and only if it hadn't entered unregistration yet.  If it
succeeds, we can use it in all normal ways until we release the "use"
reference (with ctl_head_finish()).  Note that this relies on having
->unregistering become non-NULL in all cases when one starts to unregister
the sucker.
	* keep pointers to ctl_table entries; they *can* be freed if
the entire thing is unregistered.  However, if ctl_head_grab() succeeds,
we know that unregistration had not happened (and will not happen until
ctl_head_finish()) and such pointers can be used safely.

IOW, now we can have inodes under /proc/sys keep references to ctl_table
entries, protecting them with references to ctl_table_header and
grabbing the latter for the duration of operations that require access
to ctl_table.  That won't cause deadlocks, since unregistration will not
be stopped by mere keeping a reference to ctl_table_header.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:09 -04:00
Al Viro
734550921e [PATCH] beginning of sysctl cleanup - ctl_table_set
New object: set of sysctls [currently - root and per-net-ns].
Contains: pointer to parent set, list of tables and "should I see this set?"
method (->is_seen(set)).
Current lists of tables are subsumed by that; net-ns contains such a beast.
->lookup() for ctl_table_root returns pointer to ctl_table_set instead of
that to ->list of that ctl_table_set.

[folded compile fixes by rdd for configs without sysctl]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26 20:53:08 -04:00
Linus Torvalds
a048d3aff8 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: fix modular build
  ftrace: disable tracing on acpi idle calls
  ftrace: remove latency-tracer leftover
  ftrace: only trace preempt off with preempt tracer
  ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
2008-07-26 13:25:47 -07:00
Adrian Bunk
96930a6365 make cgroup_seqfile_release() static
cgroup_seqfile_release() can become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:11 -07:00
Roland McGrath
85ba2d862e tracehook: wait_task_inactive
This extends wait_task_inactive() with a new argument so it can be used in
a "soft" mode where it will check for the task changing state unexpectedly
and back off.  There is no change to existing callers.  This lays the
groundwork to allow robust, noninvasive tracing that can try to sample a
blocked thread but back off safely if it wakes up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
b787f7ba67 tracehook: force signal_pending()
This defines a new hook tracehook_force_sigpending() that lets tracing
code decide to force TIF_SIGPENDING on in recalc_sigpending().

This is not used yet, so it compiles away to nothing for now.  It lays the
groundwork for new tracing code that can interrupt a task synthetically
without actually sending a signal.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
2b2a1ff64a tracehook: death
This moves the ptrace logic in task death (exit_notify) into tracehook.h
inlines.  Some code is rearranged slightly to make things nicer.  There is
no change, only cleanup.

There is one hook called with the tasklist_lock write-locked, as ptrace
needs.  There is also a new hook called after exit_state changes and
without locks.  This is a better place for tracing work to be in the
future, since it doesn't delay the whole system with locking.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
fa00b80b3c tracehook: job control
This defines the tracehook_notify_jctl() hook to formalize the ptrace
effects on the job control notifications.  There is no change, only
cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
7bcf6a2ca5 tracehook: get_signal_to_deliver
This defines the tracehook_get_signal() hook to allow tracing code to slip
in before normal signal dequeuing.  This lays the groundwork for new
tracing features that can inject synthetic signals outside the normal
queue or control the disposition of delivered signals.  The calling
convention lets tracehook_get_signal() decide both exactly what will
happen and what signal number to report in the handler/exit.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
445a91d2fe tracehook: tracehook_consider_fatal_signal
This defines tracehook_consider_fatal_signal() has a fine-grained hook for
deciding to skip the special cases for a fatal signal, as ptrace does.
There is no change, only cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
35de254dc6 tracehook: tracehook_consider_ignored_signal
This defines tracehook_consider_ignored_signal() has a fine-grained hook
for deciding to prevent the normal short-circuit of sending an ignored
signal, as ptrace does.  There is no change, only cleanup.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:09 -07:00
Roland McGrath
dae33574dc tracehook: release_task
This moves the ptrace-related logic from release_task into tracehook.h and
ptrace.h inlines.  It provides clean hooks both before and after locking
tasklist_lock, for future tracing logic to do more cleanup without the
lock.

This also changes release_task() itself in the rare "zap_leader" case to
set the leader to EXIT_DEAD before iterating.  This maintains the
invariant that release_task() only ever handles a task in EXIT_DEAD.  This
is a common-sense invariant that is already always true except in this one
arcane case of zombie leader whose parent ignores SIGCHLD.

This change is harmless and only costs one store in this one rare case.
It keeps the expected state more consisently sane, which is nicer when
debugging weirdness in release_task().  It also lets some future code in
the tracehook entry points rely on this invariant for bookkeeping.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Roland McGrath
daded34be9 tracehook: vfork-done
This moves the PTRACE_EVENT_VFORK_DONE tracing into a tracehook.h inline,
tracehook_report_vfork_done().  The change has no effect, just clean-up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Roland McGrath
09a05394fe tracehook: clone
This moves all the ptrace initialization and tracing logic for task
creation into tracehook.h and ptrace.h inlines.  It reorganizes the code
slightly, but should not change any behavior.

There are four tracehook entry points, at each important stage of task
creation.  This keeps the interface from the core fork.c code fairly
clean, while supporting the complex setup required for ptrace or something
like it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Roland McGrath
30199f5a46 tracehook: exit
This moves the PTRACE_EVENT_EXIT tracing into a tracehook.h inline,
tracehook_report_exec().  The change has no effect, just clean-up.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Roland McGrath
ff1188646c tracehook: unexport ptrace_notify
The ptrace_notify() function should not be called by any modules.  It was
only ever exported to be called by binfmt exec functions.  But that is no
longer necessary since fs/exec.c deals with that generically now.  There
should be no calls to ptrace_notify() from outside the core kernel.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:08 -07:00
Arjan van de Ven
261c40c119 use WARN() in kernel/irq/chip.c
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Arjan van de Ven
b8c512f619 Use WARN() in kernel/irq/manage.c
Replace a printk+WARN_ON() by a WARN(); this increases the chance of the
string making it into the bugreport (ie: it goes inside the
---[ cut here ]--- section)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Alexey Dobriyan
51cc50685a SL*B: drop kmem cache argument from constructor
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres.  Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.

Non-trivial places are:
	arch/powerpc/mm/init_64.c
	arch/powerpc/mm/hugetlbpage.c

This is flag day, yes.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:07 -07:00
Eduard - Gabriel Munteanu
20d8b67c06 relay: add buffer-only channels; useful for early logging
Allows one to create and use a channel with no associated files.  Files
can be initialized later.  This is useful in scenarios such as logging in
early code, before VFS is up.  Therefore, such channels can be created and
used as soon as kmem_cache_init() completed.

This is needed by kmemtrace to do tracing in early kernel code.

[kosaki.motohiro@jp.fujitsu.com: build fix]
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Eduard - Gabriel Munteanu
7babe8db99 Full conversion to early_initcall() interface, remove old interface
A previous patch added the early_initcall(), to allow a cleaner hooking of
pre-SMP initcalls.  Now we remove the older interface, converting all
existing users to the new one.

[akpm@linux-foundation.org: cleanups]
[akpm@linux-foundation.org: build fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
[kosaki.motohiro@jp.fujitsu.com: warning fix]
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Huang Ying
89081d17f7 kexec jump: save/restore device state
This patch implements devices state save/restore before after kexec.

This patch together with features in kexec_jump patch can be used for
following:

- A simple hibernation implementation without ACPI support.  You can kexec a
  hibernating kernel, save the memory image of original system and shutdown
  the system.  When resuming, you restore the memory image of original system
  via ordinary kexec load then jump back.

- Kernel/system debug through making system snapshot.  You can make system
  snapshot, jump back, do some thing and make another system snapshot.

- Cooperative multi-kernel/system.  With kexec jump, you can switch between
  several kernels/systems quickly without boot process except the first time.
  This appears like swap a whole kernel/system out/in.

- A general method to call program in physical mode (paging turning
  off). This can be used to invoke BIOS code under Linux.

The following user-space tools can be used with kexec jump:

- kexec-tools needs to be patched to support kexec jump. The patches
  and the precompiled kexec can be download from the following URL:
       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

- makedumpfile with patches are used as memory image saving tool, it
  can exclude free pages from original kernel memory image file. The
  patches and the precompiled makedumpfile can be download from the
  following URL:
       source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10

- An initramfs image can be used as the root file system of kexeced
  kernel. An initramfs image built with "BuildRoot" can be downloaded
  from the following URL:
       initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz
  All user space tools above are included in the initramfs image.

Usage example of simple hibernation:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_RELOCATABLE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_KEXEC_JUMP=y

2. Build an initramfs image contains kexec-tool and makedumpfile, or
   download the pre-built initramfs image, called rootfs.gz in
   following text.

3. Prepare a partition to save memory image of original kernel, called
   hibernating partition in following text.

4. Boot kernel compiled in step 1 (kernel A).

5. In the kernel A, load kernel compiled in step 1 (kernel B) with
   /sbin/kexec. The shell command line can be as follow:

   /sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000
     --mem-max=0xffffff --initrd=rootfs.gz

6. Boot the kernel B with following shell command line:

   /sbin/kexec -e

7. The kernel B will boot as normal kexec. In kernel B the memory
   image of kernel A can be saved into hibernating partition as
   follow:

   jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='`
   echo $jump_back_entry > kexec_jump_back_entry
   cp /proc/vmcore dump.elf

   Then you can shutdown the machine as normal.

8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as
   root file system.

9. In kernel C, load the memory image of kernel A as follow:

   /sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf

10. Jump back to the kernel A as follow:

   /sbin/kexec -e

   Then, kernel A is resumed.

Implementation point:

To support jumping between two kernels, before jumping to (executing)
the new kernel and jumping back to the original kernel, the devices
are put into quiescent state, and the state of devices and CPU is
saved. After jumping back from kexeced kernel and jumping to the new
kernel, the state of devices and CPU are restored accordingly. The
devices/CPU state save/restore code of software suspend is called to
implement corresponding function.

Known issues:

- Because the segment number supported by sys_kexec_load is limited,
  hibernation image with many segments may not be load. This is
  planned to be eliminated by adding a new flag to sys_kexec_load to
  make a image can be loaded with multiple sys_kexec_load invoking.

Now, only the i386 architecture is supported.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
Huang Ying
3ab8352137 kexec jump
This patch provides an enhancement to kexec/kdump.  It implements the
following features:

- Backup/restore memory used by the original kernel before/after
  kexec.

- Save/restore CPU state before/after kexec.

The features of this patch can be used as a general method to call program in
physical mode (paging turning off).  This can be used to call BIOS code under
Linux.

kexec-tools needs to be patched to support kexec jump. The patches and
the precompiled kexec can be download from the following URL:

       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

Usage example of calling some physical mode code and return:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_KEXEC=y
CONFIG_PM=y
CONFIG_KEXEC_JUMP=y

2. Build patched kexec-tool or download the pre-built one.

3. Build some physical mode executable named such as "phy_mode"

4. Boot kernel compiled in step 1.

5. Load physical mode executable with /sbin/kexec. The shell command
   line can be as follow:

   /sbin/kexec --load-preserve-context --args-none phy_mode

6. Call physical mode executable with following shell command line:

   /sbin/kexec -e

Implementation point:

To support jumping without reserving memory.  One shadow backup page (source
page) is allocated for each page used by kexeced code image (destination
page).  When do kexec_load, the image of kexeced code is loaded into source
pages, and before executing, the destination pages and the source pages are
swapped, so the contents of destination pages are backupped.  Before jumping
to the kexeced code image and after jumping back to the original kernel, the
destination pages and the source pages are swapped too.

C ABI (calling convention) is used as communication protocol between
kernel and called code.

A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to
indicate that the loaded kernel image is used for jumping back.

Now, only the i386 architecture is supported.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
WANG Cong
7fccf03265 kernel/kexec.c: make 'kimage_terminate' void
Since kimage_terminate() always returns 0, make it void.

Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:04 -07:00
David Brownell
a2e2e3577c pm selftest: rtc paranoia
Cope with a quirk of some RTCs (notably ACPI ones) which aren't guaranteed
to implement oneshot behavior when they woke the system from sleeep:
forcibly disable the alarm, just in case.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:02 -07:00
Ingo Molnar
5a7a201c51 cpumask: export cpumask_of_cpu_map
fix:

 ERROR: "cpumask_of_cpu_map" [drivers/acpi/processor.ko] undefined!
 ERROR: "cpumask_of_cpu_map" [arch/x86/kernel/microcode.ko] undefined!
 ERROR: "cpumask_of_cpu_map" [arch/x86/kernel/cpu/cpufreq/speedstep-ich.ko] undefined!
 ERROR: "cpumask_of_cpu_map" [arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:48:59 +02:00
Mike Travis
0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00