Let nfs4_schedule_session_recovery() handle the details of choosing
between resetting the session, and other session related recovery.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we handle NFS4ERR_DELAY errors separately, and then
let nfs4_recovery_handle_error() handle all other cases.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to avoid races with other RPC calls that end up setting the
NFS4CLNT_BIND_CONN_TO_SESSION flag.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the EXCHGID4_FLAG_CONFIRMED_R flag is set, the client is in theory
supposed to already know the correct value of the seqid, in which case
RFC5661 states that it should ignore the value returned.
Also ensure that if the sanity check in nfs4_check_cl_exchange_flags
fails, then we must not change the nfs_client fields.
Finally, clean up the code: we don't need to retest the value of
'status' unless it can change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Apparently the patch "NFS: Always use the same SETCLIENTID boot verifier"
is tickling a Linux nfs server bug, and causing a regression: the server
can get into a situation where it keeps replying NFS4ERR_SEQ_MISORDERED
to our CREATE_SESSION request even when we are sending the correct
sequence ID.
Fix this by purging the lease and then retrying.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Try to consolidate the error handling for nfs4_reclaim_lease into
a single function instead of doing a bit here, and a bit there...
Also ensure that NFS4CLNT_PURGE_STATE handles errors correctly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Exchange ID can be called in a lease reclaim situation, so it
will deadlock if it then tries to write out dirty NFS pages.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The state manager can handle SEQ4_STATUS_CB_PATH_DOWN* flags with a
BIND_CONN_TO_SESSION instead of destroying the session and creating a new one.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the BIND_CONN_TO_SESSION operation which is needed for
upcoming SP4_MACH_CRED work and useful for recovering from broken connections
without destroying the session.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We only support one layout type per file system, so one threshold_item4 per
mdsthreshold4.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that a process that uses the nfs_client->cl_cons_state test
for whether the initialisation process is finished does not read
stale data.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since the struct nfs_client gets added to the global nfs_client_list
before it is initialised, it is possible that rpc_pipefs_event can
end up trying to create idmapper entries on such a thing.
The solution is to have the mount notification wait for the
initialisation of each nfs_client to complete, and then to
skip any entries for which the it failed.
Reported-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Session initialisation is not complete until the lease manager
has run. We need to ensure that both nfs4_init_session and
nfs4_init_ds_session do so, and that they check for any resulting
errors in clp->cl_cons_state.
Only after this is done, can nfs4_ds_connect check the contents
of clp->cl_exchange_flags.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Andy Adamson <andros@netapp.com>
Save the server major and minor ID results from EXCHANGE_ID, as they
are needed for detecting server trunking.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"noresvport" and "discrtry" can be passed to nfs_create_rpc_client()
by setting flags in the passed-in nfs_client. This change makes it
easy to add new flags.
Note that these settings are now "sticky" over the lifetime of a
struct nfs_client, and may even be copied when an nfs_client is
cloned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Continue to rationalize the locking in nfs_get_client() by
moving the logic that handles the case where a matching server IP
address is not found.
When we support server trunking detection, client initialization may
return a different nfs_client struct than was passed to it. Change
the synopsis of the init_client methods to return an nfs_client.
The client initialization logic in nfs_get_client() is not much more
than a wrapper around ->init_client. It's simpler to keep the little
bits of error handling in the version-specific init_client methods.
No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Code that takes and releases nfs_client_lock remains in
nfs_get_client(). Logic that handles a pre-existing nfs_client is
moved to a separate function.
No behavior change is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently our NFS client assigns a unique SETCLIENTID boot verifier
for each server IP address it knows about. It's set to CURRENT_TIME
when the struct nfs_client for that server IP is created.
During the SETCLIENTID operation, our client also presents an
nfs_client_id4 string to servers, as an identifier on which the server
can hang all of this client's NFSv4 state. Our client's
nfs_client_id4 string is unique for each server IP address.
An NFSv4 server is obligated to wipe all NFSv4 state associated with
an nfs_client_id4 string when the client presents the same
nfs_client_id4 string along with a changed SETCLIENTID boot verifier.
When our client unmounts the last of a server's shares, it destroys
that server's struct nfs_client. The next time the client mounts that
NFS server, it creates a fresh struct nfs_client with a fresh boot
verifier. On seeing the fresh verifer, the server wipes any previous
NFSv4 state associated with that nfs_client_id4.
However, NFSv4.1 clients are supposed to present the same
nfs_client_id4 string to all servers. And, to support Transparent
State Migration, the same nfs_client_id4 string should be presented
to all NFSv4.0 servers so they recognize that migrated state for this
client belongs with state a server may already have for this client.
(This is known as the Uniform Client String model).
If the nfs_client_id4 string is the same but the boot verifier changes
for each server IP address, SETCLIENTID and EXCHANGE_ID operations
from such a client could unintentionally result in a server wiping a
client's previously obtained lease.
Thus, if our NFS client is going to use a fixed nfs_client_id4 string,
either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a
boot verifier that does not change depending on server IP address.
Replace our current per-nfs_client boot verifier with a per-nfs_net
boot verifier.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_reset_all_state() refreshes the boot verifier a server sees to
trigger that server to wipe this client's state. This function is
invoked when an NFSv4.1 server reports that it has revoked some or
all of a client's NFSv4 state.
To facilitate server trunking discovery, we will eventually want to
move the cl_boot_time field to a more global structure. The Uniform
Client String model (and specifically, server trunking detection)
requires that all servers see the same boot verifier until the client
actually does reboot, and not a fresh verifier every time the client
unmounts and remounts the server.
Without the cl_boot_time field, however, nfs4_reset_all_state() will
have to find some other way to force the server to purge the client's
NFSv4 state.
Because these verifiers are opaque (ie, the server doesn't know or
care that they happen to be timestamps), we can force the server
to wipe NFSv4 state by updating the boot verifier as we do now, then
immediately afterwards establish a fresh client ID using the old boot
verifier again.
Hopefully there are no extra paranoid server implementations that keep
track of the client's boot verifiers and prevent clients from reusing
a previous one.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: update to use matching types in "if" expressions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.
Introduced by commit e50a7a1a "NFS: make NFS client allocated per
network namespace context," Tue Jan 10, 2012.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.
Additionally, for consistency, move the impl_id field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.
Introduced by commit 7d2ed9ac "NFSv4: parse and display server
implementation ids," Fri Feb 17, 2012.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: When naming fields and data types, follow established
conventions to facilitate accurate grep/cscope searches.
Additionally, for consistency, move the scope field into the NFSv4-
specific part of the nfs_client, and free that memory in the logic
that shuts down NFSv4 nfs_clients.
Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April
1 2009.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
fs/nfs/nfs4state.c does not yet have any dprintk() call sites, and I'm
about to introduce some. We will need a new flag for enabling them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The SETCLIENTID boot verifier is opaque to NFSv4 servers, thus there
is no requirement for byte swapping before the client puts the
verifier on the wire.
This treatment is similar to other timestamp-based verifiers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "struct inode *inode" was only used in a dprintk, so compiling with
CONFIG_SUNRPC_DEBUG off triggers a warning. To get around this, I
remove the "struct inode *inode" variable and instead change the
dprintk()s to use hdr->inode instead.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We reset all I/O on a disconnected data server through the pgio layer indicated
by the NFS_IOHDR_REDO flag.
Differentiate between on-the-wire tasks returning with an error which must
call rpc_call_done and tasks woken from the data server slot_table_waitq
waiting for a session slot with a status of zero which call rpc_exit in
rpc_prepare and need to skip rpc_call_done.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
filelayout_scan_commit_lists needs to bump the reference count on
the struct nfs_page just like nfs_scan_commit_list().
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.
This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.
Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the last DS io is processed, the data server client record will be
freed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare to put a dis-connected DS client record.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The DS has a connection error (invalid deviceid). Drain the fore channel
slot table waitq.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state.
Reset the task for io through the MDS if the deviceid is invalid.
The reset functions put the io pages through the pageio layer which has the
advantage of re-coalescing which allows for the MDS and DS having different
r/wsizes. Exit the awakened task without executing the rpc_call_done routine.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replaced by filelayout_reset_write and filelayout_reset_read
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.
Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the recovery parameters for data servers.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
