Commit Graph

6 Commits

Author SHA1 Message Date
Andrew F. Davis
6308f1787f regulator: tps65086: Fix DT node referencing in of_parse_cb
When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.

Fixes: d2a2e729a6 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-13 18:04:28 +00:00
Andrew F. Davis
1c47f7c316 regulator: tps65086: Fix expected switch DT node names
The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729a6 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-13 18:04:25 +00:00
Andrew F. Davis
f8192880a1 regulator: tps65086: Fix 25mV ranges for BUCK regulators 1, 2, and 6
These regualtors output 0v when vsel is 0. The datasheet will be updated
to reflect this.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-12-05 17:21:22 +00:00
Andrew F. Davis
d8ca5bd158 regulator: tps65086: Fix 25mV ranges for BUCK regulators
The BUCK regulators 3, 4, and 5 also have a 10mV step mode,
adjust the tables and logic to reflect the data-sheet for
these regulators.

fixes: d2a2e729a6 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-01 17:42:27 +00:00
Andrew F. Davis
7f9354f26e regulator: tps65086: Update regulator driver for the TPS65086 PMIC
Make changes to allow this driver to work with the updated TPS65086 core
driver and bindings.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-01 19:58:58 +00:00
Andrew F. Davis
d2a2e729a6 regulator: tps65086: Add regulator driver for the TPS65086 PMIC
Add support for TPS65086 PMIC regulators.

The regulators set consists of 3 Step-down Controllers, 3 Step-down
Converters, 3 LDOs, 3 Load Switches, and a Sink and Source LDO. The
output voltages are configurable and are meant to supply power to a
SoC and/or other components.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-16 09:46:51 +00:00