Commit Graph

395 Commits

Author SHA1 Message Date
Vitaly Kuznetsov
aefd80e874 hv_netvsc: preserve hw_features on mtu/channels/ringparam changes
rndis_filter_device_add() is called both from netvsc_probe() when we
initially create the device and from set channels/mtu/ringparam
routines where we basically remove the device and add it back.

hw_features is reset in rndis_filter_device_add() and filled with
host data. However, we lose all additional flags which are set outside
of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and
many others.

Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()}
calls cannot be avoided on every RNDIS reset: host expects us to set
required features explicitly. Moreover, in theory hardware capabilities
can change and we need to reflect the change in hw_features.

Reset net->hw_features bits according to host data in
rndis_netdev_set_hwcaps(), clear corresponding feature bits
from net->features in case some features went missing (will never happen
in real life I guess but let's be consistent).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-16 10:49:00 +09:00
Vitaly Kuznetsov
b5eb819dcb hv_netvsc: hide warnings about uninitialized/missing rndis device
Hyper-V hosts are known to send RNDIS messages even after we halt the
device in rndis_filter_halt_device(). Remove user visible messages
as they are not really useful.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 10:28:54 +09:00
Vitaly Kuznetsov
0cf737808a hv_netvsc: netvsc_teardown_gpadl() split
It was found that in some cases host refuses to teardown GPADL for send/
receive buffers (probably when some work with these buffere is scheduled or
ongoing). Change the teardown logic to be:
1) Send NVSP_MSG1_TYPE_REVOKE_* messages
2) Close the channel
3) Teardown GPADLs.
This seems to work reliably.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08 10:28:54 +09:00
Haiyang Zhang
a6fb6aa3cf hv_netvsc: Set tx_table to equal weight after subchannels open
In some cases, like internal vSwitch, the host doesn't provide
send indirection table updates. This patch sets the table to be
equal weight after subchannels are all open. Otherwise, all workload
will be on one TX channel.

As tested, this patch has largely increased the throughput over
internal vSwitch.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29 12:09:23 +09:00
Haiyang Zhang
6b0cbe3158 hv_netvsc: Add initialization of tx_table in netvsc_device_add()
tx_table is part of the private data of kernel net_device. It is only
zero-ed out when allocating net_device.

We may recreate netvsc_device w/o recreating net_device, so the private
netdev data, including tx_table, are not zeroed. It may contain channel
numbers for the older netvsc_device.

This patch adds initialization of tx_table each time we recreate
netvsc_device.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14 18:42:55 -07:00
Haiyang Zhang
39e91cfbf6 hv_netvsc: Rename tx_send_table to tx_table
Simplify the variable name: tx_send_table

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14 18:42:55 -07:00
Haiyang Zhang
47371300df hv_netvsc: Rename ind_table to rx_table
Rename this variable because it is the Receive indirection
table.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14 18:42:55 -07:00
Haiyang Zhang
0518ec4f9d hv_netvsc: Add ethtool handler to set and get TCP hash levels
The patch supports the options to switch TCP hash level between
L3 and L4 by ethtool command. TCP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.

For example, for TCP over IPv4 on eth0:
To include TCP port numbers in hashing:
	ethtool -N eth0 rx-flow-hash tcp4 sdfn
To exclude TCP port numbers in hashing:
	ethtool -N eth0 rx-flow-hash tcp4 sd
To show TCP hash level:
	ethtool -n eth0 rx-flow-hash tcp4

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 10:11:01 -07:00
Haiyang Zhang
486e398105 hv_netvsc: Change the hash level variable to bit flags
This simplifies the logic and make it easier to add more
options.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08 10:11:01 -07:00
David Ahern
42ab19ee90 net: Add extack to upper device linking
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04 21:39:33 -07:00
Simon Xiao
09af87d18f hv_netvsc: report stop_queue and wake_queue
Report the numbers of events for stop_queue and wake_queue in
ethtool stats.

Example:
ethtool -S eth0
NIC statistics:
	...
	stop_queue: 7
	wake_queue: 7
	...

Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-01 04:10:30 +01:00
Haiyang Zhang
6450f8f269 hv_netvsc: Fix the real number of queues of non-vRSS cases
For older hosts without multi-channel (vRSS) support, and some error
cases, we still need to set the real number of queues to one.
This patch adds this missing setting.

Fixes: 8195b1396e ("hv_netvsc: fix deadlock on hotplug")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 20:20:51 -07:00
Colin Ian King
1b17ca044a hv_netvsc: make const array ver_list static, reduces object code size
Don't populate const array ver_list on the stack, instead make it
static. Makes the object code smaller by over 400 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  18444	   3168	    320	  21932	   55ac	drivers/net/hyperv/netvsc.o

After:
   text	   data	    bss	    dec	    hex	filename
  17950	   3224	    320	  21494	   53f6	drivers/net/hyperv/netvsc.o

(gcc 6.3.0, x86-64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-25 16:25:17 -07:00
Alex Ng
0ab09befdb hv_netvsc: fix send buffer failure on MTU change
If MTU is changed the host would reject the send buffer change.
This problem is result of recent change to allow changing send
buffer size.

Every time we change the MTU, we store the previous net_device section
count before destroying the buffer, but we don’t store the previous
section size. When we reinitialize the buffer, its size is calculated
by multiplying the previous count and previous size. Since we
continuously increase the MTU, the host returns us a decreasing count
value while the section size is reinitialized to 1728 bytes every
time.

This eventually leads to a condition where the calculated buf_size is
so small that the host rejects it.

Fixes: 8b5327975a ("netvsc: allow controlling send/recv buffer size")
Signed-off-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21 15:17:16 -07:00
Stephen Hemminger
5023a6db73 netvsc: increase default receive buffer size
The default receive buffer size was reduced by recent change
to a value which was appropriate for 10G and Windows Server 2016.
But the value is too small for full performance with 40G on Azure.
Increase the default back to maximum supported by host.

Fixes: 8b5327975a ("netvsc: allow controlling send/recv buffer size")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15 14:41:12 -07:00
Stephen Hemminger
8f2bb1de73 hv_netvsc: avoid unnecessary wakeups on subchannel creation
Only need to wakeup the initiator after all sub-channels
are opened.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 14:21:30 -07:00
Stephen Hemminger
8195b1396e hv_netvsc: fix deadlock on hotplug
When a virtual device is added dynamically (via host console), then
the vmbus sends an offer message for the primary channel. The processing
of this message for networking causes the network device to then
initialize the sub channels.

The problem is that setting up the sub channels needs to wait until
the subsequent subchannel offers have been processed. These offers
come in on the same ring buffer and work queue as where the primary
offer is being processed; leading to a deadlock.

This did not happen in older kernels, because the sub channel waiting
logic was broken (it wasn't really waiting).

The solution is to do the sub channel setup in its own work queue
context that is scheduled by the primary channel setup; and then
happens later.

Fixes: 732e49850c ("netvsc: fix race on sub channel creation")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-11 14:21:30 -07:00
Haiyang Zhang
db3cd7af9d hv_netvsc: Fix the channel limit in netvsc_set_rxfh()
The limit of setting receive indirection table value should be
the current number of channels, not the VRSS_CHANNEL_MAX.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:39:12 -07:00
Haiyang Zhang
06be580ac7 hv_netvsc: Simplify the limit check in netvsc_set_channels()
Because of the following code, net->num_tx_queues equals to
VRSS_CHANNEL_MAX, and max_chn is less than or equals to VRSS_CHANNEL_MAX.

netvsc_drv.c:
alloc_etherdev_mq(sizeof(struct net_device_context),
                                VRSS_CHANNEL_MAX);
rndis_filter.c:
net_device->max_chn = min_t(u32, VRSS_CHANNEL_MAX, num_possible_rss_qs);

So this patch removes the unnecessary limit check before comparing
with "max_chn".

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:39:12 -07:00
Haiyang Zhang
5c4217d05d hv_netvsc: Simplify num_chn checking in rndis_filter_device_add()
The minus one and assignment to a local variable is not necessary.
This patch simplifies it.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:39:12 -07:00
Haiyang Zhang
715e2ec532 hv_netvsc: Clean up an unused parameter in rndis_filter_set_rss_param()
This patch removes the parameter, num_queue in
rndis_filter_set_rss_param(), which is no longer in use.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:39:12 -07:00
Stephen Hemminger
ec158f77de netvsc: allow driver to be removed even if VF is present
If VF is attached then can still allow netvsc driver module to
be removed. Just have to make sure and do the cleanup.

Also, avoid extra rtnl round trip when calling unregister.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:31:19 -07:00
Stephen Hemminger
9a0c48df0d netvsc: cleanup datapath switch
Use one routine for datapath up/down. Don't need to reopen
the rndis layer.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 20:31:19 -07:00
David S. Miller
6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
stephen hemminger
9b4e946ce1 netvsc: fix deadlock betwen link status and removal
There is a deadlock possible when canceling the link status
delayed work queue. The removal process is run with RTNL held,
and the link status callback is acquring RTNL.

Resolve the issue by using trylock and rescheduling.
If cancel is in process, that block it from happening.

Fixes: 122a5f6410 ("staging: hv: use delayed_work for netvsc_send_garp()")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24 21:59:08 -07:00
Haiyang Zhang
c6f71c418f hv_netvsc: Fix rndis_filter_close error during netvsc_remove
We now remove rndis filter before unregister_netdev(), which calls
device close. It involves closing rndis filter already removed.

This patch fixes this error.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24 21:55:59 -07:00
Haiyang Zhang
4823eb2f3a hv_netvsc: Add ethtool handler to set and get UDP hash levels
The patch add the functions to switch UDP hash level between
L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set
differently. The default hash level is L4. We currently only
allow switching TX hash level from within the guests.

On Azure, fragmented UDP packets have high loss rate with L4
hashing. Using L3 hashing is recommended in this case.

For example, for UDP over IPv4 on eth0:
To include UDP port numbers in hasing:
	ethtool -N eth0 rx-flow-hash udp4 sdfn
To exclude UDP port numbers in hasing:
	ethtool -N eth0 rx-flow-hash udp4 sd
To show UDP hash level:
	ethtool -n eth0 rx-flow-hash udp4

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 14:08:12 -07:00
Haiyang Zhang
4c0e2cbfd9 hv_netvsc: Clean up unused parameter from netvsc_get_rss_hash_opts()
The parameter "nvdev" is not in use.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 14:08:11 -07:00
Haiyang Zhang
fcba1569a0 hv_netvsc: Clean up unused parameter from netvsc_get_hash()
The parameter "sk" is not in use.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22 14:08:11 -07:00
stephen hemminger
5dd0fb9b9f vmbus: remove unused vmbus_sendpacket_ctl
The only usage of vmbus_sendpacket_ctl was by vmbus_sendpacket.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 16:27:45 -07:00
stephen hemminger
5a668d8cdd vmbus: remove unused vmubs_sendpacket_pagebuffer_ctl
The function vmbus_sendpacket_pagebuffer_ctl was never used directly.
Just have vmbus_send_pagebuffer

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16 16:27:45 -07:00
stephen hemminger
cad5c19770 netvsc: keep track of some non-fatal overload conditions
Add ethtool statistics for case where send chimmeny buffer is
exhausted and driver has to fall back to doing scatter/gather
send. Also, add statistic for case where ring buffer is full and
receive completions are delayed.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:00:07 -07:00
stephen hemminger
8b5327975a netvsc: allow controlling send/recv buffer size
Control the size of the buffer areas via ethtool ring settings.
They aren't really traditional hardware rings, but host API breaks
receive and send buffer into chunks. The final size of the chunks are
controlled by the host.

The default value of send and receive buffer area for host DMA
is much larger than it needs to be. Experimentation shows that
4M receive and 1M send is sufficient.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 14:00:06 -07:00
stephen hemminger
ea5a32c00b netvsc: remove unnecessary check for NULL hdr
The function init_page_array is always called with a valid pointer
to RNDIS header. No check for NULL is needed.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:43 -07:00
stephen hemminger
00f5024e82 netvsc: remove unnecessary cast of void pointer
Assignment to a typed pointer is sufficient in C.
No cast is needed.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:43 -07:00
stephen hemminger
89bb42b113 netvsc: whitespace cleanup
Fix some minor indentation issues.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:43 -07:00
stephen hemminger
958333708f netvsc: no need to allocate send/receive on numa node
The send and receive buffers are both per-device (not per-channel).
The associated NUMA node is a property of the CPU which is per-channel
therefore it makes no sense to force the receive/send buffer to be
allocated on a particular node (since it is a shared resource).

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:43 -07:00
stephen hemminger
68d715f685 netvsc: check error return when restoring channels and mtu
If setting new values fails, and the attempt to restore original
settings fails. Then log an error and leave device down.
This should never happen, but if it does don't go down in flames.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:42 -07:00
stephen hemminger
16ba326600 netvsc: propagate MAC address change to VF slave
If VF is slaved to synthetic device, then any change to netvsc
MAC address should be propagated to the slave device.

If slave device doesn't support MAC address change then it
should also be an error to attempt to change synthetic NIC MAC
address.

It also fixes the error unwind in the original code.
If give a bad address, the old code would change the device
MAC address anyway.

Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:42 -07:00
stephen hemminger
5e20d55a23 netvsc: don't signal host twice if empty
When hv_pkt_iter_next() returns NULL, it has already called
hv_pkt_iter_close(). Calling it twice can lead to extra host signal.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:42 -07:00
stephen hemminger
6123c66854 netvsc: delay setup of VF device
When VF device is discovered, delay bring it automatically up in
order to allow userspace to some simple changes (like renaming).

Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:59:42 -07:00
David S. Miller
3118e6e19d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.

The TCP conflict was a case of local variables in a function
being removed from both net and net-next.

In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09 16:28:45 -07:00
stephen hemminger
7b83f52047 netvsc: make sure and unregister datapath
Go back to switching datapath directly in the notifier callback.
Otherwise datapath might not get switched on unregister.

No need for calling the NOTIFY_PEERS notifier since that is only for
a gratitious ARP/ND packet; but that is not required with Hyper-V
because both VF and synthetic NIC have the same MAC address.

Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 0c195567a8 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08 18:09:52 -07:00
stephen hemminger
fb84af8a43 netvsc: fix rtnl deadlock on unregister of vf
With new transparent VF support, it is possible to get a deadlock
when some of the deferred work is running and the unregister_vf
is trying to cancel the work element. The solution is to use
trylock and reschedule (similar to bonding and team device).

Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 0c195567a8 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:28:10 -07:00
stephen hemminger
732e49850c netvsc: fix race on sub channel creation
The existing sub channel code did not wait for all the sub-channels
to completely initialize. This could lead to race causing crash
in napi_netif_del() from bad list. The existing code would send
an init message, then wait only for the initial response that
the init message was received. It thought it was waiting for
sub channels but really the init response did the wakeup.

The new code keeps track of the number of open channels and
waits until that many are open.

Other issues here were:
  * host might return less sub-channels than was requested.
  * the new init status is not valid until after init was completed.

Fixes: b3e6b82a00 ("hv_netvsc: Wait for sub-channels to be processed during probe")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 21:23:21 -07:00
stephen hemminger
0c195567a8 netvsc: transparent VF management
This patch implements transparent fail over from synthetic NIC to
SR-IOV virtual function NIC in Hyper-V environment. It is a better
alternative to using bonding as is done now. Instead, the receive and
transmit fail over is done internally inside the driver.

Using bonding driver has lots of issues because it depends on the
script being run early enough in the boot process and with sufficient
information to make the association. This patch moves all that
functionality into the kernel.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02 16:55:33 -07:00
Joe Perches
956a25c9f1 hyperv: netvsc: Neaten netvsc_send_pkt by using a temporary
Repeated dereference of nvmsg.msg.v1_msg.send_rndis_pkt can be
shortened by using a temporary.  Do so.

No change in object code.

Miscellanea:

o Use * const for rpkt and nvchan

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02 10:36:00 -07:00
Florian Fainelli
4a0dee1ffe netvsc: Initialize 64-bit stats seqcount
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a
lockdep splat indicating this seqcount is not correctly initialized, fix
that. In commit 6c80f3fc23 ("netvsc: report per-channel stats in
ethtool statistics") netdev_alloc_pcpu_stats() was removed in favor of
open-coding the 64-bits statistics, except that u64_stats_init() was
missed.

Fixes: 6c80f3fc23 ("netvsc: report per-channel stats in ethtool statistics")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 20:06:07 -07:00
David S. Miller
29fda25a2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01 10:07:50 -07:00
stephen hemminger
f4e403633b netvsc: signal host if receive ring is emptied
Latency improvement related to NAPI conversion.
If all packets are processed from receive ring then need
to signal host.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29 15:25:43 -07:00