Commit Graph

1338 Commits

Author SHA1 Message Date
Peter Zijlstra
20273941f2 mm: fix race in kunmap_atomic()
Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.

The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM).  If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().

Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:05 -07:00
Michel Lespinasse
68da336a14 x86: access_error API cleanup
access_error() already takes error_code as an argument, so there is
no need for an additional write flag.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Michel Lespinasse
d065bd810b mm: retry page fault when blocking on disk transfer
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.

It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.

It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.

Tests:

- microbenchmark: thread A mmaps a large file and does random read accesses
  to the mmaped area - achieves about 55 iterations/s. Thread B does
  mmap/munmap in a loop at a separate location - achieves 55 iterations/s
  before, 15000 iterations/s after.

- We are seeing related effects in some applications in house, which show
  significant performance regressions when running without this change.

[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Peter Zijlstra
3e4d3af501 mm: stack based kmap_atomic()
Keep the current interface but ignore the KM_type and use a stack based
approach.

The advantage is that we get rid of crappy code like:

	#define __KM_PTE			\
		(in_nmi() ? KM_NMI_PTE : 	\
		 in_irq() ? KM_IRQ_PTE :	\
		 KM_PTE0)

and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.

The downside is that FRV kmap_atomic() gets more expensive.

For now we use a CPP trick suggested by Andrew:

  #define kmap_atomic(page, args...) __kmap_atomic(page)

to avoid having to touch all kmap_atomic() users in a single patch.

[ not compiled on:
  - mn10300: the arch doesn't actually build with highmem to begin with ]

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Linus Torvalds
f1ebdd60cc Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
  Add _addr_lsb field to ia64 siginfo
  Fix migration.c compilation on s390
  HWPOISON: Remove retry loop for try_to_unmap
  HWPOISON: Turn addr_valid from bitfield into char
  HWPOISON: Disable DEBUG by default
  HWPOISON: Convert pr_debugs to pr_info
  HWPOISON: Improve comments in memory-failure.c
  x86: HWPOISON: Report correct address granuality for huge hwpoison faults
  Encode huge page size for VM_FAULT_HWPOISON errors
  Fix build error with !CONFIG_MIGRATION
  hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
  Clean up __page_set_anon_rmap
  HWPOISON, hugetlb: fix unpoison for hugepage
  HWPOISON, hugetlb: soft offlining for hugepage
  HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
  hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
  HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
  hugetlb: hugepage migration core
  hugetlb: redefine hugepage copy functions
  hugetlb: add allocate function for hugepage migration
  ...
2010-10-26 10:13:10 -07:00
Linus Torvalds
10f2a2b0f6 Merge branch 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, mm: Add an initial page table for core bootstrapping
2010-10-22 20:37:50 -07:00
Andi Kleen
46e387bbd8 Merge branch 'hwpoison-hugepages' into hwpoison
Conflicts:
	mm/memory-failure.c
2010-10-22 17:40:48 +02:00
Linus Torvalds
3044100e58 Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
  xen: Cope with unmapped pages when initializing kernel pagetable
  memblock, bootmem: Round pfn properly for memory and reserved regions
  memblock: Annotate memblock functions with __init_memblock
  memblock: Allow memblock_init to be called early
  memblock/arm: Fix memblock_region_is_memory() typo
  x86, memblock: Remove __memblock_x86_find_in_range_size()
  memblock: Fix wraparound in find_region()
  x86-32, memblock: Make add_highpages honor early reserved ranges
  x86, memblock: Fix crashkernel allocation
  arm, memblock: Fix the sparsemem build
  memblock: Fix section mismatch warnings
  powerpc, memblock: Fix memblock API change fallout
  memblock, microblaze: Fix memblock API change fallout
  x86: Remove old bootmem code
  x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
  x86: Remove not used early_res code
  x86, memblock: Replace e820_/_early string with memblock_
  x86: Use memblock to replace early_res
  x86, memblock: Use memblock_debug to control debug message print out
  ...

Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
2010-10-21 18:52:11 -07:00
Linus Torvalds
709d9f54cc Merge branch 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Remove alloc_pmd_clone hook, only used by VMI
  x86, vmware: Remove deprecated VMI kernel support

Fix up trivial #include conflict in arch/x86/kernel/smpboot.c
2010-10-21 13:53:24 -07:00
Linus Torvalds
c3b86a2942 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-32, percpu: Correct the ordering of the percpu readmostly section
  x86, mm: Enable ARCH_DMA_ADDR_T_64BIT with X86_64 || HIGHMEM64G
  x86: Spread tlb flush vector between nodes
  percpu: Introduce a read-mostly percpu API
  x86, mm: Fix incorrect data type in vmalloc_sync_all()
  x86, mm: Hold mm->page_table_lock while doing vmalloc_sync
  x86, mm: Fix bogus whitespace in sync_global_pgds()
  x86-32: Fix sparse warning for the __PHYSICAL_MASK calculation
  x86, mm: Add RESERVE_BRK_ARRAY() helper
  mm, x86: Saving vmcore with non-lazy freeing of vmas
  x86, kdump: Change copy_oldmem_page() to use cached addressing
  x86, mm: fix uninitialized addr in kernel_physical_mapping_init()
  x86, kmemcheck: Remove double test
  x86, mm: Make spurious_fault check explicitly check the PRESENT bit
  x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes
  x86, mm: Separate x86_64 vmalloc_sync_all() into separate functions
  x86, mm: Avoid unnecessary TLB flush
2010-10-21 13:47:29 -07:00
Linus Torvalds
d60a2793ba Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove stale pmtimer_64.c
  x86, cleanups: Use clear_page/copy_page rather than memset/memcpy
  x86: Remove unnecessary #ifdef ACPI/X86_IO_ACPI
  x86, cleanup: Remove obsolete boot_cpu_id variable
2010-10-21 13:18:06 -07:00
Linus Torvalds
2f0384e5fc Merge branch 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, amd_nb: Enable GART support for AMD family 0x15 CPUs
  x86, amd: Use compute unit information to determine thread siblings
  x86, amd: Extract compute unit information for AMD CPUs
  x86, amd: Add support for CPUID topology extension of AMD CPUs
  x86, nmi: Support NMI watchdog on newer AMD CPU families
  x86, mtrr: Assume SYS_CFG[Tom2ForceMemTypeWB] exists on all future AMD CPUs
  x86, k8: Rename k8.[ch] to amd_nb.[ch] and CONFIG_K8_NB to CONFIG_AMD_NB
  x86, k8-gart: Decouple handling of garts and northbridges
  x86, cacheinfo: Fix dependency of AMD L3 CID
  x86, kvm: add new AMD SVM feature bits
  x86, cpu: Fix allowed CPUID bits for KVM guests
  x86, cpu: Update AMD CPUID feature bits
  x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bit
  x86, AMD: Remove needless CPU family check (for L3 cache info)
  x86, tsc: Remove CPU frequency calibration on AMD
2010-10-21 13:01:08 -07:00
Linus Torvalds
5d70f79b5e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (163 commits)
  tracing: Fix compile issue for trace_sched_wakeup.c
  [S390] hardirq: remove pointless header file includes
  [IA64] Move local_softirq_pending() definition
  perf, powerpc: Fix power_pmu_event_init to not use event->ctx
  ftrace: Remove recursion between recordmcount and scripts/mod/empty
  jump_label: Add COND_STMT(), reducer wrappery
  perf: Optimize sw events
  perf: Use jump_labels to optimize the scheduler hooks
  jump_label: Add atomic_t interface
  jump_label: Use more consistent naming
  perf, hw_breakpoint: Fix crash in hw_breakpoint creation
  perf: Find task before event alloc
  perf: Fix task refcount bugs
  perf: Fix group moving
  irq_work: Add generic hardirq context callbacks
  perf_events: Fix transaction recovery in group_sched_in()
  perf_events: Fix bogus AMD64 generic TLB events
  perf_events: Fix bogus context time tracking
  tracing: Remove parent recording in latency tracer graph options
  tracing: Use one prologue for the preempt irqs off tracer function tracers
  ...
2010-10-21 12:54:49 -07:00
Shaohua Li
9329672021 x86: Spread tlb flush vector between nodes
Currently flush tlb vector allocation is based on below equation:
	sender = smp_processor_id() % 8
This isn't optimal, CPUs from different node can have the same vector, this
causes a lot of lock contention. Instead, we can assign the same vectors to
CPUs from the same node, while different node has different vectors. This has
below advantages:
a. if there is lock contention, the lock contention is between CPUs from one
node. This should be much cheaper than the contention between nodes.
b. completely avoid lock contention between nodes. This especially benefits
kswapd, which is the biggest user of tlb flush, since kswapd sets its affinity
to specific node.

In my test, this could reduce > 20% CPU overhead in extreme case.The test
machine has 4 nodes and each node has 16 CPUs. I then bind each node's kswapd
to the first CPU of the node. I run a workload with 4 sequential mmap file
read thread. The files are empty sparse file. This workload will trigger a
lot of page reclaim and tlbflush. The kswapd bind is to easy trigger the
extreme tlb flush lock contention because otherwise kswapd keeps migrating
between CPUs of a node and I can't get stable result. Sure in real workload,
we can't always see so big tlb flush lock contention, but it's possible.

[ hpa: folded in fix from Eric Dumazet to use this_cpu_read() ]

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1287544023.4571.8.camel@sli10-conroe.sh.intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-20 14:44:42 -07:00
Borislav Petkov
b40827fa72 x86-32, mm: Add an initial page table for core bootstrapping
This patch adds an initial page table with low mappings used exclusively
for booting APs/resuming after ACPI suspend/machine restart. After this,
there's no need to add low mappings to swapper_pg_dir and zap them later
or create own swsusp PGD page solely for ACPI sleep needs - we have
initial_page_table for that.

Signed-off-by: Borislav Petkov <bp@alien8.de>
LKML-Reference: <20101020070526.GA9588@liondog.tnic>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-20 14:23:55 -07:00
H. Peter Anvin
d25e6b0b32 Merge branch 'x86/cleanups' into x86/trampoline 2010-10-20 14:22:45 -07:00
H. Peter Anvin
e44dea35cc Merge branch 'x86/vmware' into x86/trampoline 2010-10-20 13:18:17 -07:00
Borislav Petkov
f01f7c56a1 x86, mm: Fix incorrect data type in vmalloc_sync_all()
arch/x86/mm/fault.c: In function 'vmalloc_sync_all':
arch/x86/mm/fault.c:238: warning: assignment makes integer from pointer without a cast

introduced by 617d34d9e5.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20101020103642.GA3135@kryptos.osrc.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-20 12:54:04 -07:00
Jeremy Fitzhardinge
617d34d9e5 x86, mm: Hold mm->page_table_lock while doing vmalloc_sync
Take mm->page_table_lock while syncing the vmalloc region.  This prevents
a race with the Xen pagetable pin/unpin code, which expects that the
page_table_lock is already held.  If this race occurs, then Xen can see
an inconsistent page type (a page can either be read/write or a pagetable
page, and pin/unpin converts it between them), which will cause either
the pin or the set_p[gm]d to fail; either will crash the kernel.

vmalloc_sync_all() should be called rarely, so this extra use of
page_table_lock should not interfere with its normal users.

The mm pointer is stashed in the pgd page's index field, as that won't
be otherwise used for pgds.

Reported-by: Ian Campbell <ian.cambell@eu.citrix.com>
Originally-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4CB88A4C.1080305@goop.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-19 13:57:08 -07:00
Jeremy Fitzhardinge
44235dcde4 x86, mm: Fix bogus whitespace in sync_global_pgds()
Whitespace cleanup only.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-19 13:56:03 -07:00
Frederic Weisbecker
ebc8827f75 x86: Barf when vmalloc and kmemcheck faults happen in NMI
In x86, faults exit by executing the iret instruction, which then
reenables NMIs if we faulted in NMI context. Then if a fault
happens in NMI, another NMI can nest after the fault exits.

But we don't yet support nested NMIs because we have only one NMI
stack. To prevent from that, check that vmalloc and kmemcheck
faults don't happen in this context. Most of the other kernel faults
in NMIs can be more easily spotted by finding explicit
copy_from,to_user() calls on review.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
2010-10-14 20:43:36 +02:00
Jeremy Fitzhardinge
fef5ba7979 xen: Cope with unmapped pages when initializing kernel pagetable
Xen requires that all pages containing pagetable entries to be mapped
read-only.  If pages used for the initial pagetable are already mapped
then we can change the mapping to RO.  However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.

We do this by knowing that the kernel pagetable memory is pre-allocated
in the range e820_table_start - e820_table_end, so any pfn within this
range should be mapped read-only.  However, the pagetable setup code
early_ioremaps the pages to write their entries, so we must make sure
that mappings created in the early_ioremap fixmap area are mapped RW.
(Those mappings are removed before the pages are presented to Xen
as pagetable pages.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4CB63A80.8060702@goop.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-13 16:07:13 -07:00
H. Peter Anvin
8e4029ee35 Merge branch 'x86/urgent' into core/memblock
Reason for merge:

Forward-port urgent change to arch/x86/mm/srat_64.c to the memblock tree.

Resolved Conflicts:
	arch/x86/mm/srat_64.c

Originally-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-11 17:05:11 -07:00
Yinghai Lu
73cf624d02 x86, numa: For each node, register the memory blocks actually used
Russ reported SGI UV is broken recently. He said:

| The SRAT table shows that memory range is spread over two nodes.
|
| SRAT: Node 0 PXM 0 100000000-800000000
| SRAT: Node 1 PXM 1 800000000-1000000000
| SRAT: Node 0 PXM 0 1000000000-1080000000
|
|Previously, the kernel early_node_map[] would show three entries
|with the proper node.
|
|[    0.000000]     0: 0x00100000 -> 0x00800000
|[    0.000000]     1: 0x00800000 -> 0x01000000
|[    0.000000]     0: 0x01000000 -> 0x01080000
|
|The problem is recent community kernel early_node_map[] shows
|only two entries with the node 0 entry overlapping the node 1
|entry.
|
|    0: 0x00100000 -> 0x01080000
|    1: 0x00800000 -> 0x01000000

After looking at the changelog, Found out that it has been broken for a while by
following commit

|commit 8716273cae
|Author: David Rientjes <rientjes@google.com>
|Date:   Fri Sep 25 15:20:04 2009 -0700
|
|    x86: Export srat physical topology

Before that commit, register_active_regions() is called for every SRAT memory
entry right away.

Use nodememblk_range[] instead of nodes[] in order to make sure we
capture the actual memory blocks registered with each node.  nodes[]
contains an extended range which spans all memory regions associated
with a node, but that does not mean that all the memory in between are
included.

Reported-by: Russ Anderson <rja@sgi.com>
Tested-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CB27BDF.5000800@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org> 2.6.33 .34 .35 .36
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-10-11 15:26:15 -07:00
Andi Kleen
f672b49b07 x86: HWPOISON: Report correct address granuality for huge hwpoison faults
An earlier patch fixed the hwpoison fault handling to encode the
huge page size in the fault code of the page fault handler.

This is needed to report this information in SIGBUS to user space.

This is a straight forward patch to pass this information
through to the signal handling in the x86 specific fault.c

Cc: x86@kernel.org
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: fengguang.wu@intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-08 09:32:46 +02:00
Ingo Molnar
153db80f8c Merge commit 'v2.6.36-rc7' into core/memblock
Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-08 09:15:00 +02:00
Yinghai Lu
16c36f743b x86, memblock: Remove __memblock_x86_find_in_range_size()
Fold it into memblock_x86_find_in_range(), and change bad_addr_size()
to check_reserve_memblock().

So whole memblock_x86_find_in_range_size() code is more readable.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DEC.4000401@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:45:43 -07:00
Yinghai Lu
1d931264af x86-32, memblock: Make add_highpages honor early reserved ranges
Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.

However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x

So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.

In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions().  Also we don't need to
remove "KVA RAM" from active ranges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-10-05 21:44:35 -07:00
Jan Beulich
234bb549ee x86, cleanups: Use clear_page/copy_page rather than memset/memcpy
When operating on whole pages, use clear_page() and copy_page() in
favor of memset() and memcpy(); after all that's what they are
intended for.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4C7FB8CA0200007800013F51@vpn.id2.novell.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-22 15:36:49 -07:00
Andreas Herrmann
23ac4ae827 x86, k8: Rename k8.[ch] to amd_nb.[ch] and CONFIG_K8_NB to CONFIG_AMD_NB
The file names are somehow misleading as the code is not specific to
AMD K8 CPUs anymore. The files accomodate code for other AMD CPU
northbridges as well.

Same is true for the config option which is valid for AMD CPU
northbridges in general and not specific to K8.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100917160343.GD4958@loge.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-20 14:22:58 -07:00
Francisco Jerez
cc1a8e5233 x86: Fix the address space annotations of iomap_atomic_prot_pfn()
This patch fixes the sparse warnings when the return pointer of
iomap_atomic_prot_pfn() is used as an argument of iowrite32()
and friends.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
LKML-Reference: <1283633804-11749-1-git-send-email-currojerez@riseup.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-05 14:26:14 +02:00
Wu Fengguang
1c5f50ee34 x86, mm: fix uninitialized addr in kernel_physical_mapping_init()
This re-adds the lost chunk in commit 9b861528a8.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Haicheng Li <haicheng.li@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100903090407.GA19771@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-03 11:40:11 +02:00
Ingo Molnar
daab7fc734 Merge commit 'v2.6.36-rc3' into x86/memblock
Conflicts:
	arch/x86/kernel/trampoline.c
	mm/memblock.c

Merge reason: Resolve the conflicts, update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-31 09:45:46 +02:00
Julia Lawall
9fbaf49c7f x86, kmemcheck: Remove double test
The opcodes 0x2e and 0x3e are tested for in the first Group 2
line as well.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
LKML-Reference: <1283010066-20935-5-git-send-email-julia@diku.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-30 09:19:28 +02:00
Yinghai Lu
774ea0bcb2 x86: Remove old bootmem code
Requested by Ingo, Thomas and HPA.

The old bootmem code is no longer necessary, and the transition is
complete.  Remove it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:14:37 -07:00
Yinghai Lu
6f2a75369e x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
memblock_memory_size() will return memory size in memblock.memory.region.
memblock_free_memory_size() will return free memory size in memblock.memory.region.

So We can get exact reseved size in specified range.

Set the size right after initmem_init(), because later bootmem API will
get area above 16M. (except some fallback).

Later after we remove the bootmem, We could call that just before paging_init().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:13:54 -07:00
Yinghai Lu
a9ce6bc151 x86, memblock: Replace e820_/_early string with memblock_
1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly

-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:13:47 -07:00
Yinghai Lu
72d7c3b33c x86: Use memblock to replace early_res
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
   replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
   so adjust some calling later in setup.c::setup_arch()
   -- corruption_check and mptable_update

-v2: Move reserve_brk() early
    Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
    that could happen We have more then 128 RAM entry in E820 tables, and
    memblock_x86_fill() could use memblock_find_in_range() to find a new place for
    memblock.memory.region array.
    and We don't need to use extend_brk() after fill_memblock_area()
    So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
    To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
    in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
    memblock.reserved already..
    use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
    active_region for 32bit does include high pages
    need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline

Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:12:29 -07:00
Yinghai Lu
301ff3e88e x86, memblock: Use memblock_debug to control debug message print out
Also let memblock_x86_reserve_range/memblock_x86_free_range could print out name if memblock=debug is
specified

will also print ther name when reserve_memblock_area/free_memblock_area are called.

-v2: according to Ingo, put " if (memblock_debug) " in one place

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:11:35 -07:00
Yinghai Lu
e82d42be24 x86, memblock: Add memblock_x86_memory_in_range()
It will return memory size in specified range according to memblock.memory.region

Try to share some code with memblock_x86_free_memory_in_range() by passing get_free to
__memblock_x86_memory_in_range().

-v2: Ben want _in_range in the name instead of size

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:11:30 -07:00
Yinghai Lu
b52c17ce85 x86, memblock: Add memblock_x86_free_memory_in_range()
It will return free memory size in specified range.

We can not use memory_size - reserved_size here, because some reserved area
may not be in the scope of memblock.memory.region.

Use memblock.memory.region subtracting memblock.reserved.region to get free range array.
then count size of all free ranges.

-v2: Ben insist on using _in_range

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:11:16 -07:00
Yinghai Lu
6bcc8176d0 x86, memblock: Add memblock_x86_find_in_range_node()
It can be used to find NODE_DATA for numa.

Need to make sure early_node_map[] is filled before it is called, otherwise
it will fallback to memblock_find_in_range(), with node range.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:10:57 -07:00
Yinghai Lu
88ba088c18 x86, memblock: Add memblock_x86_register_active_regions() and memblock_x86_hole_size()
memblock_x86_register_active_regions() will be used to fill early_node_map,
the result will be memblock.memory.region AND numa data

memblock_x86_hole_size will be used to find hole size on memblock.memory.region
with specified range.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:10:52 -07:00
Yinghai Lu
4d5cf86ce1 x86, memblock: Add get_free_all_memory_range()
get_free_all_memory_range is for CONFIG_NO_BOOTMEM=y, and will be called by
free_all_memory_core_early().

It will use early_node_map aka active ranges subtract memblock.reserved to
get all free range, and those ranges will convert to slab pages.

-v4: increase range size

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:10:48 -07:00
Yinghai Lu
9dc5d569c1 x86, memblock: Add memblock_x86_reserve_range/memblock_x86_free_range
They are wrappers for core versions, which take start/end/name instead
of base/size.  This will make x86 conversion eaasier.

could add more debug print out

-v2: change get_max_mapped() to memblock.default_alloc_limit according to Michael
      Ellerman and Ben
     change to memblock_x86_reserve_range and memblock_x86_free_range according to Michael Ellerman
-v3: call check_and_double after reserve/free, so could avoid to use
      find_memblock_area. Suggested by Michael Ellerman

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:10:41 -07:00
Yinghai Lu
27de794365 x86, memblock: Add memblock_x86_to_bootmem()
memblock_x86_to_bootmem() will reserve memblock.reserved.region in
bootmem after bootmem is set up.

We can use it to with all arches that support memblock later.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:08:21 -07:00
Yinghai Lu
f88eff74aa bootmem, x86: Add weak version of reserve_bootmem_generic
It will be used memblock_x86_to_bootmem converting

It is an wrapper for reserve_bootmem, and x86 64bit is using special one.

Also clean up that version for x86_64. We don't need to take care of numa
path for that, bootmem can handle it how

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:08:13 -07:00
Yinghai Lu
fb74fb6db9 x86, memblock: Add memblock_x86_find_in_range_size()
size is returned according free range.
Will be used to find free ranges for early_memtest and memory corruption check

Do not mess it up with lib/memblock.c yet.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27 11:08:06 -07:00
Shaohua Li
660a293ea9 x86, mm: Make spurious_fault check explicitly check the PRESENT bit
pte_present() returns true even present bit isn't set but _PAGE_PROTNONE
(global bit) bit is set. While with CONFIG_DEBUG_PAGEALLOC, free pages have
global bit set but present bit clear. This patch makes we could catch
free pages access with CONFIG_DEBUG_PAGEALLOC enabled.

[ hpa: added a comment in the code as a warning to janitors ]

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1280217988.32400.75.camel@sli10-desk.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-26 16:00:21 -07:00
Haicheng Li
9b861528a8 x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes
When memory hotplug-adding happens for a large enough area
that a new PGD entry is needed for the direct mapping, the PGDs
of other processes would not get updated. This leads to some CPUs
oopsing like below when they have to access the unmapped areas.

[ 1139.243192] BUG: soft lockup - CPU#0 stuck for 61s! [bash:6534]
[ 1139.243195] Modules linked in: ipv6 autofs4 rfcomm l2cap crc16 bluetooth rfkill binfmt_misc
dm_mirror dm_region_hash dm_log dm_multipath dm_mod video output sbs sbshc fan battery ac parport_pc
lp parport joydev usbhid processor thermal thermal_sys container button rtc_cmos rtc_core rtc_lib
i2c_i801 i2c_core pcspkr uhci_hcd ohci_hcd ehci_hcd usbcore
[ 1139.243229] irq event stamp: 8538759
[ 1139.243230] hardirqs last  enabled at (8538759): [<ffffffff8100c3fc>] restore_args+0x0/0x30
[ 1139.243236] hardirqs last disabled at (8538757): [<ffffffff810422df>] __do_softirq+0x106/0x146
[ 1139.243240] softirqs last  enabled at (8538758): [<ffffffff81042310>] __do_softirq+0x137/0x146
[ 1139.243245] softirqs last disabled at (8538743): [<ffffffff8100cb5c>] call_softirq+0x1c/0x34
[ 1139.243249] CPU 0:
[ 1139.243250] Modules linked in: ipv6 autofs4 rfcomm l2cap crc16 bluetooth rfkill binfmt_misc
dm_mirror dm_region_hash dm_log dm_multipath dm_mod video output sbs sbshc fan battery ac parport_pc
lp parport joydev usbhid processor thermal thermal_sys container button rtc_cmos rtc_core rtc_lib
i2c_i801 i2c_core pcspkr uhci_hcd ohci_hcd ehci_hcd usbcore
[ 1139.243284] Pid: 6534, comm: bash Tainted: G   M       2.6.32-haicheng-cpuhp #7 QSSC-S4R
[ 1139.243287] RIP: 0010:[<ffffffff810ace35>]  [<ffffffff810ace35>] alloc_arraycache+0x35/0x69
[ 1139.243292] RSP: 0018:ffff8802799f9d78  EFLAGS: 00010286
[ 1139.243295] RAX: ffff8884ffc00000 RBX: ffff8802799f9d98 RCX: 0000000000000000
[ 1139.243297] RDX: 0000000000190018 RSI: 0000000000000001 RDI: ffff8884ffc00010
[ 1139.243300] RBP: ffffffff8100c34e R08: 0000000000000002 R09: 0000000000000000
[ 1139.243303] R10: ffffffff8246dda0 R11: 000000d08246dda0 R12: ffff8802599bfff0
[ 1139.243305] R13: ffff88027904c040 R14: ffff8802799f8000 R15: 0000000000000001
[ 1139.243308] FS:  00007fe81bfe86e0(0000) GS:ffff88000d800000(0000) knlGS:0000000000000000
[ 1139.243311] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1139.243313] CR2: ffff8884ffc00000 CR3: 000000026cf2d000 CR4: 00000000000006f0
[ 1139.243316] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1139.243318] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1139.243321] Call Trace:
[ 1139.243324]  [<ffffffff810ace29>] ? alloc_arraycache+0x29/0x69
[ 1139.243328]  [<ffffffff8135004e>] ? cpuup_callback+0x1b0/0x32a
[ 1139.243333]  [<ffffffff8105385d>] ? notifier_call_chain+0x33/0x5b
[ 1139.243337]  [<ffffffff810538a4>] ? __raw_notifier_call_chain+0x9/0xb
[ 1139.243340]  [<ffffffff8134ecfc>] ? cpu_up+0xb3/0x152
[ 1139.243344]  [<ffffffff813388ce>] ? store_online+0x4d/0x75
[ 1139.243348]  [<ffffffff811e53f3>] ? sysdev_store+0x1b/0x1d
[ 1139.243351]  [<ffffffff8110589f>] ? sysfs_write_file+0xe5/0x121
[ 1139.243355]  [<ffffffff810b539d>] ? vfs_write+0xae/0x14a
[ 1139.243358]  [<ffffffff810b587f>] ? sys_write+0x47/0x6f
[ 1139.243362]  [<ffffffff8100b9ab>] ? system_call_fastpath+0x16/0x1b

This patch makes sure to always replicate new direct mapping PGD entries
to the PGDs of all processes, as well as ensures corresponding vmemmap
mapping gets synced.

V1: initial code by Andi Kleen.
V2: fix several issues found in testing.
V3: as suggested by Wu Fengguang, reuse common code of vmalloc_sync_all().

[ hpa: changed pgd_change from int to bool ]

Originally-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
LKML-Reference: <4C6E4FD8.6080100@linux.intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-26 14:02:33 -07:00