Commit Graph

1569 Commits

Author SHA1 Message Date
Guenter Roeck
4cc452758f hwmon: (coretemp) Fix checkpatch errors
Fix remaining checkpatch errors in the coretemp driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-21 07:29:17 -07:00
Guenter Roeck
5e99c2f1e0 hwmon: Remove pkgtemp driver
After the merge of pkgtemp functionality into the coretemp driver,
the pkgtemp driver is no longer necessary. Remove it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-21 07:22:10 -07:00
Durgadoss R
199e0de7f5 hwmon: (coretemp) Merge pkgtemp with coretemp
This patch merges the pkgtemp with coretemp driver.
The sysfs interfaces for all cores in the same pkg
are shown under one directory, in hwmon. It also
supports CONFIG_HOTPLUG_CPU. So, the sysfs interfaces
are created when each core comes online and are
removed when it goes offline.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
[guenter.roeck@ericsson.com: Fixed section reference errors]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-20 07:04:49 -07:00
Guenter Roeck
83f7649c52 hwmon: (pmbus) Add support for Analog Devices ADM1275
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:41 -07:00
Guenter Roeck
0c0a061516 hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910
Sequencer and System Health Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:40 -07:00
Guenter Roeck
84fc4585c1 hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck
6586b14c7b hwmon: (pmbus) Use device specific function to read fan configuration
Fan control implementation tends to be device specific, so start using
the device specific function call to read fan configuration registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck
2cfa6aedb3 hwmon: (pmbus) Expand scope of device specific get_status function
Some devices use non-standard registers to access various functionality.
This does not only affect status registers, but other registers as well.
Rename local get_status function to get_byte_data to reflect this requirement.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:38 -07:00
Guenter Roeck
b4ce237b7f hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers
This commit replaces hard-coded sensor and limit register detection code
with table based sensor detection. This change eliminates code block repetition
and reduces code size.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:37 -07:00
Guenter Roeck
f5bae2642e hwmon: Driver for MAX16065 System Manager and compatibles
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066,
MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers
with nonvolatile fault registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2011-05-19 08:19:36 -07:00
Jerome Oufella
82c7465b4d hwmon: (sht15) add support for CRC validation
The sht15 sensor allows validating exchanges to and from the device
using a crc8 function. An utility function to reverse a byte has also
been added.

Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:36 -07:00
Vivien Didelot
cc15c7ebb4 hwmon: (sht15) add support for the status register
* Add support for:
  - Heater.
  - End of battery notice.
  - Ability not to reload from OTP.
  - Low resolution (12bit temp, 8bit humidity).
* Add an utility function to read individual bytes from the device.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:35 -07:00
Vivien Didelot
181148ae68 hwmon: (sht15) clean-up the probe function
* Move the creation of sysfs attributes after the end of the
  initialization, and remove them in the error path.
* Release regulator in the error path.
* Add a soft reset command (need to wait 11ms before next command).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:34 -07:00
Vivien Didelot
99a0378de9 hwmon: (sht15) general code clean-up
* Add a documentation file for the device.
* Respect a bit more the kernel-doc syntax.
* Rename some variables for clarity.
* Use bool type for flags.
* Use an enum for states (actions being done).

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:33 -07:00
Per Dalén
83bffbce74 hwmon: Add support for MAX6642
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:32 -07:00
Axel Lin
c30aa39c23 hwmon: (twl4030-madc-hwmon) Return proper error if hwmon_device_register fails
The driver did not return an error if the call to hwmon_device_register failed.
Fix by returning the error reported from hwmon_device_register.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-01 09:06:35 -07:00
Jean Delvare
bc4d45f190 hwmon: (lm85) Fix error paths in probe function
We must remove all files we created, even in error cases.

Fixes second part of kernel bug #34072:
https://bugzilla.kernel.org/show_bug.cgi?id=34072

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29 16:33:36 +02:00
Jean Delvare
5f441e2256 hwmon: (lm85) Add missing list terminators
Fixes kernel bug #34072:
https://bugzilla.kernel.org/show_bug.cgi?id=34072

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29 16:33:36 +02:00
Jean Delvare
d7ce0335b5 hwmon: (adm1021) Clarify documentation regarding Xeon processors
Recent Xeon processor thermal sensors are supported by the coretemp
driver and not the adm1021 driver. Only one old generation of Xeon
processors (the first Netburst ones) are supported by the adm1021
driver.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-04-29 16:33:36 +02:00
Guenter Roeck
5a4e5e6a70 hwmon: (lm90) Add support for ADT7461A and NCT1008
This patch adds support for ADT7461A and NCT1008 to the lm90 driver.
Both chips have identical functionality and report the same manufacturing ID
and device ID values.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-04-29 16:33:35 +02:00
Guenter Roeck
3b17857dfb hwmon: (pmbus) Removed unused variable from struct pmbus_data
struct pmbus_data included an unused variable named status_bits.
Remove it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-04-19 08:49:56 -07:00
Linus Torvalds
42933bac11 Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
  Fix common misspellings
2011-04-07 11:14:49 -07:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Axel Lin
c4757ee58a hwmon: twl4030-madc-hwmon: add "platform:" prefix for platform modalias
Since 43cc71eed1 (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-29 17:26:18 -07:00
Thomas Gleixner
dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Linus Torvalds
4329510c22 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (pmbus) Fix temperature limit register access
2011-03-27 20:03:39 -07:00
Guenter Roeck
3506999e2f hwmon: (pmbus) Fix temperature limit register access
Commit 8677011 added auto-update to temperature limit registers.
Unfortunately, the update flag is also used to determine if an attribute
is writable, which results in read-only temperature limit registers.
To fix the problem, pass 'readonly' as separate flag to the function used
to add sensor attributes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 09:53:56 -07:00
Hans de Goede
a66c10887a hwmon: (f71882fg) Add support for the F71889A
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-26 10:45:02 +01:00
Jean Delvare
383586b12d hwmon: (f71882fg) Add support for the F81865F
Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:02 +01:00
Jean Delvare
5d7f77bf66 hwmon: (f71882fg) Document all supported devices
The list of supported devices was not always well documented in all
places. Clarify and list all devices in documentation, Kconfig and
the driver itself.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:02 +01:00
Jean Delvare
f27def07bf hwmon: (f71882fg) Per-chip fan/temperature input count tables
Use tables to list the count of fan and temperature inputs for all
supported chips, almost similar to (but more simple than) what is
already done for voltage inputs. This avoids repeating the same tests
in different functions, and will make it easier to add support for
chips with a different count of fan or temperature inputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:01 +01:00
Jean Delvare
2740c60c4a hwmon: (f71882fg) Secure chip property definition arrays
Using C99-style array initialization will ensure definitions won't
drift if the chips enum gets new values added.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-26 10:45:01 +01:00
Andres Salomon
e9300066bb jz4740: silence warnings related to mfd_get_cell changes
mfd_get_cell returns a const, so change the jz4740 clients to store
a const mfd cell.  This silences type mismatch warnings.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:02 +01:00
Keerthy
0070bddfe7 hwmon: twl4030: Hwmon Driver for TWL4030 MADC
This driver exposes the sysfs nodes of the TWL4030 MADC module.
All the voltage channel values are expressed in terms of mV. Channel 13
and channel 14 are reserved. There are channels which represent
temperature and current the output is represented by celcius
and mA respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:00 +01:00
Andres Salomon
6a54ac2149 mfd: mfd_cell is now implicitly available to jz4740 drivers
No need to explicitly set the cell's platform_data/data_size.

Modify clients to use mfd_get_cell helper function instead of
accessing platform_data directly.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:50 +01:00
Dirk Eibach
c0046867f3 hwmon: (ads1015) Make gain and datarate configurable
Configuration for ads1015 gain and datarate is possible via
devicetree or platform data.

This is a followup patch to previous ads1015 patches on Jean Delvares
tree.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:37 +01:00
Jean Delvare
fdf241a8ed hwmon: (ads1015) Drop dynamic attribute group
It is cheaper to handle attributes individually.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Dirk Eibach <eibach@gdsys.de>
2011-03-21 17:59:37 +01:00
Dirk Eibach
8c22a8f575 hwmon: Add support for Texas Instruments ADS1015
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Hans de Goede
a98d506c08 hwmon: New driver for SMSC SCH5627
SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.

The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Hans de Goede
93d0cc5883 hwmon: (abituguru*) Update my email address
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Jean Delvare
e76f67b5ba hwmon: (lm75) Speed up detection
Make the LM75/LM75A device detection faster:

* Don't read the current temperature value when we don't use it.
* Check for unused bits in the configuration register as soon as we
  have read its value.
* Don't use word reads, not all devices support this, and some which
  don't misbehave when you try.
* Check for cycling register values every 40 register addresses
  instead of every 8, it's 5 times faster and just as efficient.

Some of these improvements come straight from the user-space
sensors-detect script, so both detection routines are in line now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-21 17:59:36 +01:00
Len Sorensen
05e82fe40f hwmon: (lm75) Add detection of the National Semiconductor LM75A
Add support for detection of the National Semiconductor LM75A using the ID
register value.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Jean Delvare
ff606677f6 Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare
efcfed9bad Move hp_accel to drivers/platform/x86
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare
39c3e721d6 Let Kconfig handle lis3lv02d dependencies
The dependencies between the various lis3lv02d drivers make it
impossible to split them to different directories, while we really
want to do this. Move handling of dependencies from Makefile to
Kconfig, to make the move possible at all.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:35 +01:00
Vivien Didelot
ccd32e735d hwmon: (sht15) Fix integer overflow in humidity calculation
An integer overflow occurs in the calculation of RHlinear when the
relative humidity is greater than around 30%. The consequence is a subtle
(but noticeable) error in the resulting humidity measurement.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-21 17:59:35 +01:00
Justin P. Mattock
396bd766a6 hwmon: (sht15) Spelling fix
Remove one too many "n" in a word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:35 +01:00
Linus Torvalds
a44f99c7ef Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
  video: change to new flag variable
  scsi: change to new flag variable
  rtc: change to new flag variable
  rapidio: change to new flag variable
  pps: change to new flag variable
  net: change to new flag variable
  misc: change to new flag variable
  message: change to new flag variable
  memstick: change to new flag variable
  isdn: change to new flag variable
  ieee802154: change to new flag variable
  ide: change to new flag variable
  hwmon: change to new flag variable
  dma: change to new flag variable
  char: change to new flag variable
  fs: change to new flag variable
  xtensa: change to new flag variable
  um: change to new flag variables
  s390: change to new flag variable
  mips: change to new flag variable
  ...

Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-20 18:14:55 -07:00
Linus Torvalds
19520fc1ee Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)
  hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes
  hwmon/f71882fg: Add support for f71808e
  hwmon/f71882fg: Add support for f71869f and f71869e
  hwmon/f71882fg: Add support for f71889ed
  hwmon/f71882fg: Break out test for auto pwm's controlled by digital readings
  hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr
  hwmon/f71882fg: Remove bogus temp2_type for certain models
  hwmon/f71882fg: Make number of temps configurable
  hwmon/f71882fg: Make creation of in sysfs attributes more generic
  hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled
  hwmon/f71882fg: Fix temp1 sensor type reporting
  hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F
  hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F
  hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F
  hwmon: (w83627ehf) Store rpm instead of raw fan speed data
  hwmon: (w83627ehf) Use 16 bit fan count registers if supported
  hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F
  hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup
  hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers
  hwmon: (w83627ehf) Remove references to datasheets which no longer exist
  ...
2011-03-17 16:59:38 -07:00
matt mooney
5c39e31195 hwmon: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:05:33 +01:00
Linus Torvalds
4c5811bf46 Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
  tty: serial: altera_jtaguart: Add device tree support
  tty: serial: altera_uart: Add devicetree support
  dt: eliminate of_platform_driver shim code
  dt: Eliminate of_platform_{,un}register_driver
  dt/serial: Eliminate users of of_platform_{,un}register_driver
  dt/usb: Eliminate users of of_platform_{,un}register_driver
  dt/video: Eliminate users of of_platform_{,un}register_driver
  dt/net: Eliminate users of of_platform_{,un}register_driver
  dt/sound: Eliminate users of of_platform_{,un}register_driver
  dt/spi: Eliminate users of of_platform_{,un}register_driver
  dt: uartlite: merge platform and of_platform driver bindings
  dt: xilinx_hwicap: merge platform and of_platform driver bindings
  ipmi: convert OF driver to platform driver
  leds/leds-gpio: merge platform_driver with of_platform_driver
  dt/sparc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: Eliminate users of of_platform_{,un}register_driver
  dt/powerpc: move of_bus_type infrastructure to ibmebus
  drivercore/dt: add a match table pointer to struct device
  dt: Typo fix.
  altera_ps2: Add devicetree support
  ...
2011-03-16 17:28:10 -07:00
Guenter Roeck
d668a8b022 hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes
The alarm bit assumed to be a low voltage alarm bit is not set for low voltage
alarms, and the alarm bit assumed to be a high voltage alarm turns out to be a
general alarm bit which is set for both low and high voltage alarms.

Remove the in1_min_alarm sysfs attribute and rename in1_max_alarm to in1_alarm
to reflect the situation.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-16 06:57:34 -07:00
Hans de Goede
e5e713cbe8 hwmon/f71882fg: Add support for f71808e
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Jonathan Michalon <johndescs@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:26 -07:00
Hans de Goede
c11bb99362 hwmon/f71882fg: Add support for f71869f and f71869e
Note that these 2 are register compatible and report the same superio id,
but they are 2 distinct chips / models!

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Thomas Faber <thfabba@gmx.de>
Tested-by: Alexey Sychev <owl@umail.ru>
Tested-by: Dieter Bloms <dieter@bloms.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:26 -07:00
Hans de Goede
3cad402281 hwmon/f71882fg: Add support for f71889ed
Note that this patch also makes 2 changes to the code paths for the f71889fg
to keep the code unified between the 2 (for simplicities sake). Both of these
are harmless for then f71889fg:

1) The first change is to always set the FAN_PROG_SEL bit to 0. This influences
   accesses to some banked fan / pwm registers. On the f71889fg no registers
   which we use are banked. On the f71889ed however some more fan registers
   have been banked including one which we use, by making the FAN_PROG_SEL bit
   0, address 0x96 will point to the right register.
2) The second change is to see a FANx_TEMP_SEL value of 0 as pointing to
   a PECI / AMDSI value, and thus disable our pwm related sysfs attr.
   This is correct for the f71889ed and on the f71889fg 0 is a reserved
   value, so we should never see it and if we do, disabling the pwm related
   sysfs attr is a sane thing to do.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Thomas Greve <tg42@gmx.net>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:25 -07:00
Hans de Goede
e48a7f1a71 hwmon/f71882fg: Break out test for auto pwm's controlled by digital readings
Putting this check in its own switch case rather then in the switch case
for adding pwm auto point sysfs attr is cleaner. This is a preparation patch
for adding support for more different models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:24 -07:00
Hans de Goede
78aa4f72b3 hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr
This is a preparation patch for adding support for more different models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:24 -07:00
Hans de Goede
2a91946ac9 hwmon/f71882fg: Remove bogus temp2_type for certain models
Remove the temp2_type sysfs files for f8000 / f71858fg models,
this got in accidentally and is wrong as these models don't have a
Temperature Sensor Type Register at all.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:23 -07:00
Hans de Goede
60d2b378bb hwmon/f71882fg: Make number of temps configurable
Make the temp sysattr array for the standard models a 2d array, which allows
to use it for models with less temperatures too. This is a preparation
patch for adding support for more different models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:22 -07:00
Hans de Goede
0bae640088 hwmon/f71882fg: Make creation of in sysfs attributes more generic
This is a preparation patch for adding support for more different models,
some of which have a sparse list of used voltage pins.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:22 -07:00
Hans de Goede
98f7ba197f hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:21 -07:00
Hans de Goede
44c4dc521e hwmon/f71882fg: Fix temp1 sensor type reporting
The code for determining a sensort type for temp1 was based on me misreading
the datasheet, the tested registers do not determine what kind of sensor
is actually reported as temp1. Instead the enable / disable certain additional
digital sensor readouts throug PECI / AMDSI, etc. Independent of these settings
temp1 is still reading an external BJT or thermistor as configured by the
Temperature Sensor Type Register (0x6b).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:21 -07:00
Guenter Roeck
02309ad2b8 hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F
Systems with NCT6775F reported temperature sensor labels for systems with
NCT6776F. This patch fixes the problem.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:20 -07:00
Ian Dobson
d42e869acf hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F
NCT6776F and NCT6775F support debouncing the fan RPM signal. This can
help improve the stability of th RPM signal for some fans (Arctic cooling
fans for example).
This patch adds a module parameter fan_debounce, which when set to 1 enables
debounce for all fans that the chip supports.

Signed-off-by: Ian Dobson <i.dobson@planet-ian.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:19 -07:00
Guenter Roeck
2dd59c26e9 hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:19 -07:00
Guenter Roeck
3382a918da hwmon: (w83627ehf) Store rpm instead of raw fan speed data
Since the fan speed value can be above 0xff, we can no longer use
that value to determine if the fan speed reading is valid. This
makes it difficult to manipulate the stored fan speed register value.

If we store rpm instead of the fan speed register value, we do not
need to correct it if the fan divisor value is changed, and the above
mentioned problem no longer exists.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:18 -07:00
Guenter Roeck
26bc440e3f hwmon: (w83627ehf) Use 16 bit fan count registers if supported
Some of the chips supported by this driver have 13 bit or 16 bit fan count
registers. This patch improves support for those registers, specifically for
NCT6775F. With the changes in this patch, fan speed is reported correctly even
if the fan divider is set to a low value, which results in a fan speed reading
above 0xff.

With this patch, the width of fan count registers is no longer used to determine
if the chip has fan divider register(s) or not. A dedicated flag is used instead
to determine if this is the case.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:18 -07:00
Guenter Roeck
ec3e5a1644 hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F
This patch adds support for NCT6775F and NCT6776F to the w83627ehf driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Ian Dobson <i.dobson@planet-ian.com> (NCT6776F)
Tested-by: Zachary Marzec <zmarzec@gmail.com> (ASUS P8P67 PRO/NCT6776F)
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:17 -07:00
Guenter Roeck
b84bb51862 hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup
If SmartFan IV mode was configured at startup, it should be possible
to re-enable it later on.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:16 -07:00
Guenter Roeck
279af1a91a hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers
For newer chips, several registers are banked and thus need to be 16 bit.
Also, register addresses change.

To prepare for those chips, convert affected register arrays to 16 bit,
and change access to those registers to array pointers in struct w83627ehf_data.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:16 -07:00
Guenter Roeck
d36cf32c9a hwmon: (w83627ehf) Improve support for W83667HG-B
Add support for 4th temperature sensor on W83677HG-B.
Display temperature labels on W83677HG-B to report temperature sources.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:14 -07:00
Guenter Roeck
83cc8985b8 hwmon: (w83627ehf) Optimize multi-bank register access
Assume that each register is banked, and set the bank for each access.
Cache the bank number so it only needs to be set if it changes.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:14 -07:00
Guenter Roeck
e7e1ca6ef4 hwmon: (w83627ehf) Fixed most checkpatch warnings and errors
This cleanup fixes most of the checkpatch warnings and errors in the w83627ehf
driver. Remaining warnings and errors are left untouched on purpose to avoid
making the code less readable.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:13 -07:00
Guenter Roeck
bce26c58df hwmon: (w83627ehf) Unify temperature register access, and use strict string conversions
This patch unifies temperature register access, and replaces simple_strtoXXX
with strict_strtoXXX throughout the driver.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ian Dobson <i.dobson@planet-ian.com>
2011-03-14 22:39:13 -07:00
per.dalen@appeartv.com
de7790155f hwmon: Add support for LTC4151
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear
Technology.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00
Guenter Roeck
9f6ad1ce64 hwmon: (pmbus) Fix LINEAR16 data format
LINEAR16 data format is unsigned, not signed. Impact is that affected
attributes report negative values in the upper half of the supported
value range.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00
Guenter Roeck
8677011a5d hwmon: (pmbus) Continuously update temperature limit registers
PMBus only has one set of limit registers for up to three temperature sensors.
Thus, changing a limit for one of the temperature sensors affects limits for
other temperature sensors in the same page (and potentially multiple pages
depending on the chip implementation). To handle this situation, re-read all
temperature limit registers when updating sensor data. This way, all affected
temperature limits are updated whenever the limit for a single sensor is
changed.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:10 -07:00
Guenter Roeck
b49547a5df hwmon: (pmbus) Improve support for paged temperature sensors
Assumption so far was that PMBus devices would support TEMP2 and TEMP3 registers
only on page 0, and that only the TEMP1 register would be used/supported
on other pages.

Turns out that is not correct. UCD92xx devices support TEMP1 and TEMP2 on
page 0, and TEMP2 on other pages. So it is necessary to change the core code
such that it does not make a page based assumptions about temperature register
support.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:09 -07:00
Guenter Roeck
954df6763c hwmon: (pmbus) Improve support for paged fans
So far, it seemed like fans would either all be in page 0, or that
there would be one page per fan.

Turns out this was a wrong assumption. There is at least one PMBus
fan controller which supports three pages with four fans each.
Update code to handle this situation.

Reported-by: Greg Schnorr <gschnorr@cisco.com>
Tested-by: Greg Schnorr <gschnorr@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14 22:39:09 -07:00
Guenter Roeck
83274c68a3 hwmon: (pmbus) More stringent checking of VOUT_MODE register
Some PMBus chips do not support the VOUT_MODE register. To make matters worse,
such chips may not return an error when reading the register either, but instead
return 0xff.

Check if the register exists using pmbus_check_byte_register() before reading
its value. In addition, validate the returned value and ignore it if it is 0xff
(which is invalid).

Reported-by: Greg Schnorr <gschnorr@cisco.com>
Tested-by: Greg Schnorr <gschnorr@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Greg Schnorr <gschnorr@cisco.com>
2011-03-14 22:39:08 -07:00
Guenter Roeck
a3eeb45353 hwmon: (pmbus) Add support for Maxim MAX34440/MAX34441
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:07 -07:00
Guenter Roeck
dcb7d0668b hwmon: (pmbus) Add support for Maxim MAX16064
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:07 -07:00
Guenter Roeck
8ea3238ba1 hwmon: (pmbus) Add support for Maxim MAX8688
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:39:06 -07:00
Guenter Roeck
442aba7872 hwmon: PMBus device driver
This driver adds support for hardware monitoring features of various PMBus
devices.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-14 22:36:26 -07:00
Guenter Roeck
06923f8442 hwmon: (lm85) Add support for EMC6D103S
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7],
6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected
registers for all other chips only.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
4f8ab430fa hwmon: (lm85) Do not update hysteresis and temp_auto_off if auto_temp_min is changed
So far, the driver updates temp_auto_hyst and temp_auto_off if temp_auto_min changes.
This may cause problems if temp_auto_off was not configured before configuring
temp_auto_min, because one of the variables used (off_desired) is not initialized
in this case.

To simplify the code, and for consistency with other drivers, no longer update the delta
between "min" and "off" until the user sets the "off" value again.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
bc6db2b5ce hwmon: (lm85) Use function to remove sysfs attribute files
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
de24880586 hwmon: (lm85) Use boolean to determine if VID5 is configured
ADT7463 and ADT7468 optionally support VID5 instead of the standard +12V
measurement input. Use a boolean to identify the chip configuration instead of
hardcoding it several times.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-03-14 22:36:25 -07:00
Guenter Roeck
502b5a0199 hwmon: Add support for Lineage Compact Power Line PEM devices
This patch adds support for hardware monitoring of Lineage Compact Power Line
Power Entry Modules.

Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
Mark Brown
4e9be65059 hwmon: (lis3lv02d) Convert SPI to dev_pm_ops
There is a move to deprecate bus-specific PM operations and move to
using dev_pm_ops instead in order to reduce the amount of boilerplate
code in buses and facilitiate updates to the PM core. Do this move for
the lis3lv02d SPI driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
stigge@antcom.de
177f3b920c hwmon: (max6639) Set reasonable default PWM frequency
This patch initializes register CONFIG3 to a reasonable default PWM frequency
of 25kHz, to prevent audible sound in fan.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:25 -07:00
stigge@antcom.de
a5b79d62f2 hwmon: Driver for Maxim MAX6639
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:36:24 -07:00
Hans de Goede
d9ebaa4547 hwmon/f71882fg: Set platform drvdata to NULL later
This avoids a possible race leading to trying to dereference NULL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13 07:42:52 -07:00
Hans de Goede
14a4019de8 hwmon/f71882fg: Fix a typo in a comment
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-13 07:40:41 -07:00
Grant Likely
4ebb24f707 dt/sparc: Eliminate users of of_platform_{,un}register_driver
Get rid of old users of of_platform_driver in arch/sparc.  Most
of_platform_driver users can be converted to use the platform_bus
directly.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28 01:36:39 -07:00
axel lin
a7254d68b6 hwmon: (adt7411) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
axel lin
6407deb594 hwmon: (ad7414) add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-26 08:59:32 -08:00
Jan Beulich
f065a93e16 hwmon: (lm85) extend to support EMC6D103 chips
The interface is identical EMC6D102, so all that needs to be added are
some definitions and their uses.

Registers apparently missing in EMC6D103S/EMC6D103:A2 compared to EMC6D103:A0,
EMC6D103:A1, and EMC6D102 (according to the data sheets), but used
unconditionally in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. For that
reason, EMC6D103S chips don't get enabled for the time being.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
(Guenter Roeck: Replaced EMC6D103_A2 with EMC6D103S per EMC6D103S datasheet)
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
2011-02-18 17:43:36 -08:00
Clemens Ladisch
aa4790a628 hwmon: (k10temp) add support for AMD Family 12h/14h CPUs
Add the PCI ID to support the internal temperature sensor of the
AMD "Llano" and "Brazos" processor families.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-18 06:14:24 -08:00
Clemens Ladisch
2c6315da6a hwmon: (jc42) do not allow writing to locked registers
On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers.  In that case, all writes
through the corresponding sysfs files would be silently ignored.

To prevent this, detect the locks and make the affected sysfs files
read-only.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:33 -08:00
Clemens Ladisch
d5622f5b6c hwmon: (jc42) more helpful documentation
The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does.  To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.

Also add a link to the actual JC 42.4 specification.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:32 -08:00
Clemens Ladisch
e866729605 hwmon: (jc42) fix type mismatch
In set_temp_crit_hyst(), make the variable 'val' have the correct
type for strict_strtoul().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-02-16 08:18:31 -08:00
Guenter Roeck
bcf721d14d hwmon: (emc1403) Fix I2C address range
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-02-09 13:45:52 -08:00
Dirk Eibach
2778fb13ba hwmon: (lm63) Consider LM64 temperature offset
LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.

Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
2011-02-09 13:45:42 -08:00
Kalhan Trisal
a20f0bc10c hwmon: (lis3) turn down the no IRQ message
Turn down the no IRQ message - on some platforms that's a normal state of
affairs.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-25 09:10:50 -08:00
Luca Tettamanti
86ca33e825 hwmon: (asus_atk0110) Override interface detection on Sabertooth X58
ASUS Sabertooth X58 has a bug in ACPI that prevents the reading of MCH
temperature when the "old" ATK0110 interface is used. Add a DMI entry
to override the detection heuristic and force the use of the "new"
interface on this board.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Joris Creyghton <jorisctn@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-23 09:30:08 -08:00
Henrik Rydberg
9d1f8a40dd hwmon: (applesmc) Properly initialize lockdep attributes
The switch to dynamically allocated sysfs attributes left the
internal lockdep members uninitialized, causing a formal bug.
This patch adds sysfs_attr_init() to the node creation function,
remedying the problem.

Reported-and-tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-23 09:28:50 -08:00
Guenter Roeck
c7bf71c517 hwmon: (lm93) Add support for LM94
This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-01-18 12:22:54 -08:00
Juerg Haefliger
06f3d9fb4a hwmon: (dme1737) Minor cleanups
Minor cleanups. Mostly removing assignments in if statements to get
rid of checkpatch errors.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Juerg Haefliger
d4b94e1fa6 hwmon: (dme1737) Add support for in7 for SCH5127
Add support for the 1.5V voltage monitoring input (in7) of the
SMSC SCH5127 chip.

Signed-off-by: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:13 +01:00
Jekyll Lai
7a1b76f2a4 hwmon: (emc1403) Add EMC1423 support
EMC1423 uses the similar register and adds a hardware shutdown pin to
protect exceed temperature. This function is set by resistor; it's not
necessary to do anything in the driver except add the emc1423 pid of 0x23.

Signed-off-by: Jekyll Lai <jekyll_lai@wistron.com>
[Updated Kconfig/comments and minor further changes asked for by the hwmon
 maintainers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[Fixed checkpatch warning]
Signed-of--by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:12 +01:00
Jean Delvare
36c7fe133e hwmon: (w83793) Drop useless mutex
This is the same case as fschmd, from which the code was copied as far
as I can see. So the same clean-up applies:

The WDIOC_GETSUPPORT ioctl only needs a mutex because it operates on a
static variable. There is no good reason to keep this variable static,
so let's just make it non-static and drop the now useless mutex
altogether.

See the discussion at:
http://marc.info/?l=lm-sensors&m=125563869402323&w=2

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-12 21:55:11 +01:00
Jean Delvare
1b7243e8f5 hwmon: (fschmd) Drop useless mutex
As discussed one year ago, the WDIOC_GETSUPPORT ioctl only needs a
mutex because it operates on a static variable. There is no good
reason to keep this variable static, so let's just make it non-static
and drop the now useless mutex altogether.

See the discussion at:
http://marc.info/?l=lm-sensors&m=125563869402323&w=2

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-12 21:55:11 +01:00
Joe Perches
1ca28218eb hwmon: (w83781d) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

[JD: Optimize repeated debug messages]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
5e24e0c365 hwmon: (pc87427) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
9e991c6fad hwmon: (pc87360) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

[JD: Also convert debug messages]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:11 +01:00
Joe Perches
ce47da742d hwmon: (lm78) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:10 +01:00
Joe Perches
a8ca103793 hwmon: (it87) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:10 +01:00
Jean Delvare
a516dc3e9b hwmon: (w83793) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:10 +01:00
Jean Delvare
c32301b595 hwmon: (w83792d) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
0de2b24480 hwmon: (adm9240) Implement the standard intrusion detection interface
We have a standard intrusion detection interface now, drivers should
implement it. I've left the old interface in place for the time being,
with a deprecation warning, it will be removed later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
f790674d3f hwmon: (via686a) Initialize fan_div values
Functions set_fan_min() and set_fan_div() assume that the fan_div
values have already been read from the register. The driver currently
doesn't initialize them at load time, they are only set when function
via686a_update_device() is called. This means that set_fan_min() and
set_fan_div() misbehave if, for example, "sensors -s" is called
before any monitoring application (e.g. "sensors") is has been run.

Fix the problem by always initializing the fan_div values at device
bind time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare
014bcd28a0 hwmon: (w83795) Silent false warning from gcc
The code triggers a false warning with older versions of gcc:
w83795.c: In function 'w83795_update_device':
w83795.c:475: warning: 'lsb' may be used uninitialized in this function

I admit that the code is a little tricky, but I see no way to write it
differently without hurting performance. So let's just silent the
warning with a needless initialization.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Steven Hardy
5d84291da3 hwmon: (ads7828) Update email contact details
Trivial patch updating my email contact details due to change of
employer, and because I no longer have access to the previously used
domain.

Unfortunately I also no longer have access to any ads7828 hardware, but
am happy to support/maintain the driver if others are able to test
changes.

Signed-off-by: Steve Hardy <shardy@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-01-12 21:55:08 +01:00
Roland Stigge
6099469805 hwmon: Support for Dallas Semiconductor DS620
Driver for Dallas Semiconductor DS620 temperature sensor and thermostat

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-09 09:10:10 -08:00
Urs Fleisch
430400b863 hwmon: driver for Sensirion SHT21 humidity and temperature sensor
Signed-off-by: Urs Fleisch <urs.fleisch@sensirion.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:56:28 -08:00
Jan Beulich
ae9e0ce73e hwmon: (via-cputemp) sync hotplug handling with coretemp/pkgtemp
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:48 -08:00
Davide Rizzo
0f1deb4b82 hwmon: (lm95241) Rewrite to avoid using macros
Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com>
[guenter.roeck@ericsson.com: Formatting changes]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:47 -08:00
Guenter Roeck
2bfe814826 hwmon: (applesmc) Fix checkpatch errors and fix value range checks
This patch fixes all checkpatch errors and most of the checkpatch warnings.
It also fixes the range check in applesmc_store_fan_speed().

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
2011-01-08 10:55:46 -08:00
Henrik Rydberg
41e71f9717 hwmon: (applesmc) Update copyright information
With the preceding patches, git blame assigns about half of
the file to the present author. Add a line to the copyright
to reflect this.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:45 -08:00
Henrik Rydberg
0b8ad5a57b hwmon: (applesmc) Silence driver
Make the driver report a single line on success.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:44 -08:00
Henrik Rydberg
0b0b5dff89 hwmon: (applesmc) Simplify feature sysfs handling
Given the dynamic node construction method, the setup of the
accelerometer, light sensor and keyboard backlight sysfs nodes
can be simplified. This patch does not contain any logic changes.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:43 -08:00
Henrik Rydberg
3eba2bf7c5 hwmon: (applesmc) Dynamic creation of fan files
With the dynamic temperature group in place, the setup of fans
can be simplified. This patch sets up the fans dynamically, removing
a hundred lines of code.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:42 -08:00
Henrik Rydberg
40ef06f112 hwmon: (applesmc) Extract all features generically
With temperature keys being determined automatically, the dmi match
data is only used to assign features that can easily be detected from
the smc. This patch removes the dmi match data altogether, and reduces
the match table to the main machine models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:41 -08:00
Henrik Rydberg
dcdea2614a hwmon: (applesmc) Handle new temperature format
The recent Macbooks have temperature registers of a new type.
This patch adds the logic to handle them.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:40 -08:00
Henrik Rydberg
9792dadfce hwmon: (applesmc) Dynamic creation of temperature files
The current driver creates temperature files based on a list
of temperature keys given per device. Apart from slow adaption
to new machine models, the number of sensors also depends on
the number of processors. This patch looks up the temperature
keys dynamically, thereby supporting all models.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:39 -08:00
Henrik Rydberg
5874583d56 hwmon: (applesmc) Introduce a register lookup table
One main problem with the current driver is the inability to quickly
search for supported keys, resulting in detailed feature maps per
machine model which are cumbersome to maintain.

This patch adds a register lookup table, which enables binary search
for supported keys. The lookup also reduces the io frequency, so the
original mutex is replaced by locks around the actual io.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
[guenter.roeck@ericsson.com: Added value range check to key_at_index_store()]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:38 -08:00
Joe Perches
1ee7c71bd1 hwmon: (applesmc) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:37 -08:00
Henrik Rydberg
2344cd0c2e hwmon: (applesmc) Relax the severity of device init failure
The device init is used to reset the accelerometer. Failure to reset
is not severe enough to stop loading the module or to resume from
hibernation.  This patch relaxes failure to a warning and drops
output in case of success.

Cc: stable@kernel.org
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:35 -08:00
Edgar Hucek
132af03233 hwmon: (applesmc) Add MacBookAir3,1(3,2) support
This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the
applesmc driver.

[rydberg@euromail.se: minor cleanup]
Cc: stable@kernel.org
Signed-off-by: Edgar Hucek <gimli@dark-green.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:34 -08:00
Joe Perches
18de030f1d hwmon: (w83627hf) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:33 -08:00
Joe Perches
abdc6fd189 hwmon: (w83627ehf) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:32 -08:00
Joe Perches
9d72be0da1 hwmon: (vt8231) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:31 -08:00
Joe Perches
5ed9ba6b87 hwmon: (vt1211) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:30 -08:00
Joe Perches
774f7827e1 hwmon: (via686a) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:29 -08:00
Joe Perches
edb8d53c68 hwmon: (via-cputemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:28 -08:00
Joe Perches
512504e9f5 hwmon: (smsc47m1) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:27 -08:00
Joe Perches
bf1a85eff8 hwmon: (smsc47b397) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:19 -08:00
Joe Perches
4b2515dbb9 hwmon: (sis5595) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:18 -08:00
Joe Perches
14a613cc23 hwmon: (pkgtemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:17 -08:00
Joe Perches
2caec1343e hwmon: (pcf8591) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:16 -08:00
Joe Perches
5713017ec5 hwmon: (lm70) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:15 -08:00
Joe Perches
63366d37ad hwmon: (lis3lv02d) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:14 -08:00
Joe Perches
55d705cce8 hwmon: (ibmaem) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:13 -08:00
Joe Perches
c95df1ae69 hwmon: (core) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:11 -08:00
Joe Perches
1f923c7a67 hwmon: (hwmon-vid) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:10 -08:00
Joe Perches
53ab0e6888 hwmon: (hp_accel) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:09 -08:00
Joe Perches
22d3b41281 hwmon: (f71882fg) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:08 -08:00
Joe Perches
e54c5ad61f hwmon: (f71805f) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:07 -08:00
Joe Perches
9c6e13b411 hwmon: (dme1737) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:06 -08:00
Joe Perches
f8bb892568 hwmon: (coretemp) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:05 -08:00
Joe Perches
ac561494d4 hwmon: (asus_atk0110) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:04 -08:00
Joe Perches
4d630e2ba5 hwmon: (asb1000) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:03 -08:00
Joe Perches
2e991201e4 hwmon: (adt7470) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:02 -08:00
Joe Perches
fe826749ae hwmon: (abituguru3) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats
Added a few static strings to standardize logging messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:01 -08:00
Joe Perches
28ebfa13f9 hwmon: (abituguru) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats
Added a few static strings to standardize logging messages.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-08 10:55:00 -08:00
Maurus Cuelenaere
b518a64983 hwmon: (s3c-hwmon) Fix compilation
The owner field was removed from struct attribute in
6fd69dc578, so don't assign it anymore.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-02 15:31:11 -08:00
Linus Torvalds
dc99bf7823 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ltc4215) make sysfs file match the alarm cause
2010-12-14 13:36:26 -08:00
Ira W. Snyder
0a6bf658c3 hwmon: (ltc4215) make sysfs file match the alarm cause
The ltc4215 driver used the chip's "power good" status bit to provide
the power1_alarm file. This is wrong: the chip is really reporting the
status of one of the monitored voltages.

Change the sysfs file from power1_alarm to in2_min_alarm instead. This
matches the voltage that the chip is raising an alarm for.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-12-13 09:54:50 -08:00
Gabriele Gorla
8b0f1840a4 hwmon: (adm1026) Allow 1 as a valid divider value
Allow 1 as a valid div value as specified in the ADM1026 datasheet.

Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-12-08 16:27:22 +01:00
Gabriele Gorla
52bc9802ce hwmon: (adm1026) Fix setting fan_div
Prevent setting fan_div from stomping on other fans that share the
same I2C register.

Signed-off-by: Gabriele Gorla <gorlik@penguintown.net>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-12-08 16:27:22 +01:00
Jean Delvare
6229cdb236 hwmon: (it87) Fix manual fan speed control on IT8721F
The manual fan speed control logic of the IT8721F is much different
from what older devices had. Update the code to properly support that.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-12-08 16:27:22 +01:00
Guenter Roeck
32292f49f9 hwmon: (lis3lv02d_i2c) Fix compile warnings
This commit fixes the following compile warnings.

From v2.6.37-rc2/m68k/m68k-allmodconfig, v2.6.37-rc2/powerpc/powerpc-randconfig:
drivers/hwmon/lis3lv02d_i2c.c:222: warning: 'lis3_i2c_runtime_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:231: warning: 'lis3_i2c_runtime_resume' defined but not used

Seen if CONFIG_PM_RUNTIME is not set.

From v2.6.37-rc2/sh4/sh-allyesconfig:
drivers/hwmon/lis3lv02d_i2c.c:191: warning: 'lis3lv02d_i2c_suspend' defined but not used
drivers/hwmon/lis3lv02d_i2c.c:201: warning: 'lis3lv02d_i2c_resume' defined but not used

Seen if CONFIG_PM is set but CONFIG_PM_SLEEP is not.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-22 12:23:39 -08:00
Guenter Roeck
c48a291635 hwmon: (i5k_amb) Fix compile warning
This patch fixes the following compile warning.

drivers/hwmon/i5k_amb.c:500: warning: 'i5k_amb_ids' defined but not used

The warning is seen if the driver is built into the kernel (not as module).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-22 12:23:39 -08:00
Jean Delvare
52d159eecc hwmon: (w83795) Check for BEEP pin availability
On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.

The W83795G has a dedicated BEEP pin so the functionality is always
available there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare
793c51d5fd hwmon: (w83795) Clear intrusion alarm immediately
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare
cf6b9ea661 hwmon: (w83795) Read the intrusion state properly
We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)

So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
2a2d27da00 hwmon: (w83795) Print the actual temperature channels as sources
Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
edff2f8d81 hwmon: (w83795) List all usable temperature sources
Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
d5ab845a13 hwmon: (w83795) Expose fan control method
Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
ae51cd9bcd hwmon: (w83795) Fix fan control mode attributes
There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
  It will be added back as a separate attribute, as per the standard
  sysfs interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare
61ec2da506 hwmon: (lm95241) Check validity of input values
This clears the following build-time warnings I was seeing:

drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result

This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
2010-11-15 21:38:56 +01:00
Hans J. Koch
2aa25c22c4 hwmon: Change mail address of Hans J. Koch
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15 21:38:56 +01:00
Axel Lin
4f5b7994f0 hwmon: (gpio-fan) Fix fan_ctrl_init error path
In current implementation, the sysfs entries is not removed before return -ENODEV.

Creating the sysfs attribute should be the last thing done by the function,
after all the rest has been successful.
Otherwise there is a small window during which user-space can access the attribute
but the driver isn't ready to deal with the requests.

Fix it by moving sysfs_create_group to be the last thing done by the function.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:43:51 -08:00
Axel Lin
f0030d87be hwmon: (ad7414) Return proper error code for ad7414_probe()
Return proper error if i2c_check_functionality reports
the adapter does not support the capability we need.

Also remove unneeded initialization for err variable.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:32:07 -08:00
Axel Lin
f7334b4ca9 hwmon: (adt7470) Return proper error code for adt7470_probe()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-11 09:32:07 -08:00
Jean Delvare
475200c088 hwmon: (ltc4261) Fix error message format
adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-05 10:17:19 -07:00
Guenter Roeck
69f8b74193 hwmon: (ltc4261) Add missing newline in debug message
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2010-11-05 10:17:19 -07:00
Jean Delvare
44c1bcd4bc hwmon: (it87) Add support for the IT8721F/IT8758E
Add support for the IT8721F/IT8758E. These new chips differ from the
older IT87xxF chips in the following ways:
* ADC LSB is 12 mV instead of 16 mV.
* PWM values are 8-bit instead of 7-bit.
There are other minor changes we don't have to care about in the
driver.

Another change is that we will handle internal voltage scaling in the
driver instead of delegating the work to user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
0df6454da9 hwmon: (it87) Move conversion functions
Move conversion functions until after structure defintions. This is
needed for future changes which make use of the structures in the
conversion funtcions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:51 +02:00
Jean Delvare
0b22ce3b7d hwmon: Remove many EXPERIMENTAL flags
Remove the dependency on EXPERIMENTAL for all drivers which are in
the kernel tree for a long time, are known to work properly and for
which we have documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Juerg Haefliger <juergh@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
f6c61cff8b hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
The ADT7468 supports a high-frequency PWM output mode where all PWM
outputs are driven by a 22.5 kHz clock. Add support for this mode, and
document it, as it may surprise the user that setting one PWM output
frequency also affects the other PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
c36364dbf3 hwmon: (lm85) Document the ADT7468 as supported
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
fa7a5797e5 hwmon: (lm85) Fix ADT7468 frequency table
The ADT7468 uses the same frequency table as the ADT7463.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Cc: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
918ee91c07 hwmon: I2C addresses are constant
We can mark normal_i2c const. Almost all drivers do that already, so
fix the 3 remaining ones before they are used as (bad) examples for
new drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: George Joseph <george.joseph@fairview5.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:50 +02:00
Jean Delvare
bd5f47ec96 Move ams driver to macintosh
The ams driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/macintosh seems much more
appropriate, as the driver is only useful on PowerBooks and iBooks.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Stelian Pop <stelian@popies.net>
Cc: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
2010-10-28 20:31:50 +02:00
Jean Delvare
6dfee85397 hwmon: (pcf8591) Don't attempt to detect devices
The PCF8591 can't be detected, don't even try. There are plenty of
other means to instantiate i2c devices these days.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:50 +02:00
Jean Delvare
4275fcd65d hwmon: (pcf8591) Register as a hwmon device
Register PCF8591 devices as hwmon devices. There's little point in
implementing the standard sysfs interface if we don't register it in
a way libsensors will pick it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
2010-10-28 20:31:49 +02:00
Jean Delvare
2437710102 hwmon: (w83795) Use standard attributes for chassis intrusion
Follow the standard attribute naming for the chassis intrusion
feature. I couldn't test the beeping (my board apparently doesn't do
that) but the alarm works fine.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
00030af231 hwmon: (w83795) Exclude fan control feature by default
The fan control feature of the w83795 driver is insufficiently
reviewed and tested for public consumption at this time, so make it
optional and disabled by default. We will change the default when
review and testing is deemed sufficient. Ultimately the option will
go away.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
e3760b432d hwmon: (w83795) Add myself as co-author and maintainer
I've made so many changes to the w83795 driver that it's only fair to
list myself as a co-author. I'll also maintain the driver for some
time. There's more work needed on the driver for sure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
eb02755a50 hwmon: (w83795) More style cleanups
Cleanups suggested by Guenter Roeck, falling into 4 categories:
* Swapping test orders, because if (var == CONSTANT) is much easier to
  read than if (CONSTANT == var).
* Simplifying comparisons with 0.
* Dropping unneeded masks.
* Dropping unneeded parentheses and curly braces.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare
5d2cd958f7 hwmon: (w83795) Fix LSB reading of voltage limits
Wrong index caused the wrong register value to be read, resulting in
random LSB for voltage limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare
21fc977551 hwmon: (w83795) Use dev_get_drvdata() where possible
When we don't need the client pointer, calling dev_get_drvdata() is
more efficient that calling to_i2c_client() and then
i2c_get_clientdata().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare
1bb3450ce5 hwmon: (w83795) Delay reading pwm config registers
Wait until we need the pwm config register values, instead of
pre-reading them. This saves over 1 second on modprobe on my test
system.

Obviously this time is added when first accessing pwm config
attributes, however not everybody will use them, so it seems unfair
to slow down driver loading (and thus boot) for an optional feature.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
2ae61de905 hwmon: (w83795) Delay reading limit registers
Wait until we need the limit register values, instead of pre-reading
them. This saves 544 ms on modprobe on my test system. Obviously this
time is added when first running "sensors" or any other monitoring
application, but I think it is better than slowing down the boot.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
0d7237bfd1 hwmon: (w83795) Move register reads to dedicated functions
Move initial register reads out of probe, to dedicated functions.
This makes the code clearer, and will be needed if we want to delay
calling these functions until they are needed, or want to call them
periodically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare
476a4e5d37 hwmon: (w83795) Pack similar register reads
Pack similar register reads using for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
fd7f82b8a3 hwmon: (w83795) Make W83795_REG_PWM more efficient
Cascaded conditionals are inefficient. Reorder the fields so that
PWM register addresses can be computed more efficiently.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare
5f7b77cbd4 hwmon: (w83795) Don't pre-read values we'll update later
There is no point in reading registers during initialization if we
will refresh the values in the update function later. This is only
slowing down the driver loading with no benefit, stop doing it.
This change saves 480 ms on driver load on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
39deb6993e hwmon: (w83795) Simplify temperature sensor type handling
All 3 temperature sensor type sysfs functions (show_temp_mode,
store_temp_mode and show_dts_mode) can be simplified. We don't
create these files when the correponding input isn't in temperature
monitoring mode, so there is no point in handling that case.
Likewise, we don't allow changing inputs from temperature to voltage,
so the code handling this case is dead and can be removed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
cd316df582 hwmon: (w83795) Drop _NUM constants
Consistently use ARRAY_SIZE() to control for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
49c7347a44 hwmon: (w83795) Drop REST_VLT_BEGIN/END
Get rid of REST_VLT_BEGIN and REST_VLT_END, they don't make the code
more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare
7eb8d508b5 hwmon: (w83795) Fix parity checks
x % 1 is obviously wrong, as it always evaluates to 0. You want
x % 2, or x & 1, for parity checking.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
a654b9d4e7 hwmon: (w83795) Get rid of VRLSB_SHIFT
VRLSB_SHIFT is a non-sense, the actual shift depends on the sensor
type (fans need 4, other sensors need 6). Get rid of it to prevent
any confusion. Also get rid of the useless masking, the meaningful
bits are always the MSb so there's nothing to mask out after
shifting.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
c1a792a6ee hwmon: (w83795) Avoid reading the same register twice
Shorten driver load time by avoiding duplicate register access during
initialization. This saves 112 ms on modprobe on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
02728ffef9 hwmon: (w83795) Rework beep_enable implementation
Handle beep_enable just like all other beep bits. It doesn't need
anything special, so let's avoid redundant code. This also saves a
duplicate register read at initialization time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
54891a3c13 hwmon: (w83795) Report PECI agent Tbase values
On systems with PECI, report PECI agent Tbase temperature values.
This is informative only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
dd127f5ccd hwmon: (w83795) Properly handle negative temperatures
The temperature registers hold regular 2's complement values, no need
to add any arithmetics.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
a0ce402fb0 hwmon: (w83795) Rename temperature limit attributes
Follow the standard for temperature limit attribute naming, so that
libsensors will pick the values.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
01879a855f hwmon: (w83795) Fix PWM duty cycle frequency attributes
The PWM duty cycle frequenty attributes are improperly named
(fanN_div instead of pwmN_div) and contain raw values instead of
actual frequencies. Rename them and fix their contents.

Also improve the logic when the user asks for a new frequency, to
always pick the closest supported frequency. The algorithm could
certainly be optimized, but the operation is infrequent enough that
I don't think it's worth the effort.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare
0e256018b0 hwmon: (w83795) Add support for dynamic in0-2 limits
The W83795G can be configured to set the in0, in1 and/or in2 voltage
limits dynamically based on VID input pins. Switch the respective
sysfs attributes to read-only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
6c82b2f3fb hwmon: (w83795) Fix LSB reading of fan speeds
Misplaced parentheses caused the wrong register value to be read,
resulting in random LSB for fan speed values and limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
71caf46fbf hwmon: (w83795) Clean up probe function
* The data structure is zalloc'd, so no need to set individual fields
  to 0 explicitly.
* Refactor the handling of pins that can be used for either
  temperature or voltage monitoring.
* Misc other clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
6f9dfd85f7 hwmon: (w83795) Fix in17-in20 gain factor
Gain bit set means 1x gain and cleared means 8x gain, not the other
way around.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
80646b9586 hwmon: (w83795) Only start monitoring if needed
This saves an SMBus write if monitoring was already enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
86ef4d2fd5 hwmon: (w83795) Add const markers
Attribute structures can be made const. Same for the I2C address
list.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
b2cc528e58 hwmon: (w83795) Only create fan[1-8]_target files when needed
Only create fan[1-8]_target files when the fan in question can be
controlled (PWM output is present.) Also name these files according
to the standard.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
b5f6a90a0b hwmon: (w83795) Move PWM attributes to a dedidated array
Use a dedicated 2D array for PWM attributes. This way, PWM attributes
are handled the same way as other attributes, this is more consistent.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare
87df0dad3e hwmon: (w83795) Use 2D arrays for many device attributes
Use 2D arrays for in, fan, temp and dts device attributes. Using
linear arrays is too risky as we have to skip some groups depending
on the device model and configuration. Adding or removing an
attribute would let the driver build silently but then it would crash
at runtime. With 2D arrays, the consistency checking happens at build
time, which is much safer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
6f3dcde9c6 hwmon: (w83795) Merge w83795_create_files and w83795_remove_files
Functions w83795_create_files and w83795_remove_files iterate over
the same set of files, just calling a different function. Merge them
into a single function which takes the action as a parameter. This
saves code, and also ensure that file creation and deletion are in
sync.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
892514a637 hwmon: (w83795) Move file creation to a separate function too
Function w83795_probe() is way too big, move file creation to a separate
function to make it more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
2fa09878ba hwmon: (w83795) Move files removal to a separate function
Sysfs files must be removed on device removal but also when device
registration fails. Move the code to a separate function to avoid
code redundancy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
2be381de0f hwmon: (w83795) Improve detection routine
Check for additional identification registers. Improve debugging
messages on failed detection.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
b2469f422f hwmon: (w83795) Refactor bank selection
Move the bank selection code to a separate function, to avoid
duplicating it in read and write functions. Improve error reporting
on register access error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
093d1a4794 hwmon: (w83795) Drop duplicate enum
Enum chips and chip_types are redundant, get rid of the former. Fix
the detection code to properly identify the chip variant and name the
client accordingly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare
315bacfdbe hwmon: (w83795) Misc cleanups
* Improve driver description.
* Drop unused macro.
* Drop unreachable code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Wei Song
792d376b4f hwmon: New driver for the W83795G/ADG monitoring chips
There is still much work needed, but I wanted to give Wei the credit
he deserves. I've merged some of my own fixes already, to make
gcc and checkpatch happy. Individual fixes and improvements from me
will follow.

[JD: Fix build errors]
[JD: Coding style cleanups]
[JD: Get rid of forward declarations]
[JD: Drop VID support]
[JD: Drop fault output control feature]
[JD: Use lowercase for inline function names]
[JD: Use strict variants of the strtol/ul functions]
[JD: Shorten the read and write function names]

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Maurus Cuelenaere
62991f7ab3 hwmon: (s3c-hwmon) Depend on S3C_ADC
This way we don't need to modify Kconfig every time a new SoC comes along to
make this driver support it. Also fix some typos while I'm at it.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Thomas Gleixner
9c627e3be3 hwmon: (s3c-hwmon) Use a real mutex
The semaphore which protects the ADC is semantically a mutex. Use a
real mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Shubhrajyoti D
caaa0f36c3 hwmon: (lm75) Trivial changes to pacify the checkpatch
Some trivial changes to pacify the checkpatch.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Shubhrajyoti D
e3cd9528af hwmon: (lm75) Make the writing to sysfs more robust
Currently we get the checkpatch warning
consider using strict_strtol in preference to simple_strtol.
Also we should not allow any partially numeric values.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Jean Delvare
c4f99a2b8f hwmon: (lm90) Add support for the W83L771W/G
I was wondering if that chip ever existed publicly... Apparently yes,
so add support for it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:44 +02:00
Guenter Roeck
0c01b644f7 hwmon: (lm90) Add support for update_interval sysfs attribute
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Guenter Roeck
1179324c41 hwmon: (lm90) Introduce capability flag to indicate broken ALERT functionality
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:44 +02:00
Guenter Roeck
4667bcb8d8 hwmon: (lm90) Introduce chip parameter structure
Instead of using switch/case and if statements in probe, define chip specific
functionality in a parameter structure array.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
15b66ab690 hwmon: (lm90) Rearrange code to no longer require forward declarations
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
06e1c0a216 hwmon: (lm90) Add support for max6695 and max6696
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
6948708dd0 hwmon: (lm90) Add support for extra features of max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00
Guenter Roeck
13c84951a3 hwmon: (lm90) Add explicit support for max6659
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:43 +02:00