Commit Graph

293 Commits

Author SHA1 Message Date
Richard Purdie
078abcf95c [ARM] 3096/1: Add SharpSL Zaurus power and battery management core driver
Patch from Richard Purdie

This patch adds a power and battery management core driver which with
the addition of the right device files, supports the c7x0 and cxx00
series of Sharp Zaurus handhelds.

The driver is complex for several reasons. Battery charging is manually
monitored and controlled. When suspended, the device needs to
periodically partially resume, check the charging status and then
re-suspend. It does without bothering the higher linux layers as
a full resume and re-suspend is unnecessary. The code is carefully
written to avoid interrupts or calling code outside the module under
these circumstances. It also vets the various wake up sources and
monitors the device's power situation.

Hooks to limit the backlight intensity and to notify the battery
monitoring code of backlight events are connected/added as the
backlight is one of the biggest users of power on the device.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 17:42:29 +00:00
Russell King
3ae5eaec1d [DRIVER MODEL] Convert platform drivers to use struct platform_driver
This allows us to eliminate the casts in the drivers, and eventually
remove the use of the device_driver function pointer methods for
platform device drivers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09 22:32:44 +00:00
Adrian Bunk
703ebe86a9 [PATCH] drivers/video/vgastate.c: kill dead code
This patch kills some dead code.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:36 -08:00
Arnd Bergmann
c7f82d9c49 [PATCH] fbdev: move ioctl32 code to fbmem.c
The frame buffer layer already had some code dealing with compat ioctls, this
patch moves over the remaining code from fs/compat_ioctl.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:36 -08:00
Ralf Baechle
01a16fae8e [PATCH] fbdev: Remove remains of epson1356fb
Delete leftovers of the FB_E1356 and anything that did depend on it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:36 -08:00
Antonino A. Daplas
81d3e147ec [PATCH] fbdev: Possible endian fix in cfbimageblit
Fix possible endian bug(?) when bit testing in slow_imageblit().  This
function is rarely called (only if (width * bpp) % 32 != 0) thus the bug is
not triggered.

However, if the console is rotated at 90 or 270 degrees, the height becomes
the width, and a variety of fonts have heights that will force a call to
slow_imageblit().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:36 -08:00
Antonino A. Daplas
120ddb41f1 [PATCH] vga16fb: Convert vga16fb as a platform device
- Convert vga16fb as a platform device

- use framebuffer_alloc() to dynamically allocate resources, and
  framebuffer_release() to free

- remove unneeded casts

- trivial whitespace changes

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:35 -08:00
Antonino A. Daplas
a812c94b94 [PATCH] fbcon: Console Rotation - Add ability to control rotation via sysfs
Add ability to set rotation via sysfs.  The attributes are located in
/sys/class/graphics/fb[n] and accepts 0 - unrotated; 1 - clockwise; 2 - upside
down; 3 - counterclockwise.

The attributes are:

con_rotate (r/w) -   set rotation of the active console
con_rotate_all (w) - set rotation of all consoles
rotate (r/w) -       set rotation of the framebuffer, if supported.
Currently, none of the drivers support this.

This is probably temporary, since con_rotate and con_rotate_all are
console-specific and has no business being under the fb device.  However,
until the console layer acquires it's own sysfs class, these attributes will
temporarily reside here.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:35 -08:00
Antonino A. Daplas
ed8c0e99f2 [PATCH] fbcon: Console Rotation - Add support for 270-degree rotation
Add support for 270-degree (counterclockwise) rotation of the console.  To
activate, boot with:

fbcon=rotate:3

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
33ee82978c [PATCH] fbcon: Console Rotation - Add support for 180-degree console rotation
Add support for 180-degree (upside down) rotation of the console.  To
activate, boot with:

fbcon=rotate:2

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
dbcbfe1ea4 [PATCH] fbcon: Console Rotation - Add support for 90-degree console rotation
Add support for 90-degree (clockwise) rotation of the console.  To activate,
boot with:

fbcon=rotate:1

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
6cc50e1c5b [PATCH] fbcon: Console Rotation - Add support to rotate font bitmap
Add support to rotate the font bitmap.  To save on processing time, the entire
fontdata will be rotated on a console switch, then stored in a buffer private
to fbcon.  To further save on processing, the fontdata will only be rotated if
the font has changed or if the angle of rotation has changed.  Only a single
copy of the rotated fontdata will be kept.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
9c44e5f6c2 [PATCH] fbcon: Console Rotation - Add support to rotate the logo
Add support for rotating and positioning of the logo.  Rotation and position
depends on 'int rotate' parameter added to fb_prepare_logo() and
fb_show_logo().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
e4fc27618b [PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation
This patch series implements generic code to rotate the console at 90, 180,
and 270 degrees. The implementation is completely done in the framebuffer
console level, thus no changes to the framebuffer layer or to the drivers
are needed.

Console rotation is required by some Sharp-based devices where the natural
orientation of the display is not at 0 degrees. Also, users that have
displays that can pivot will benefit by having a console in portrait mode
if they so desire.

The choice to implement the code in the console layer rather than in the
framebuffer layer is due to the following reasons:

- it's fast
- it does not require driver changes
- it can coexist with devices that can rotate the display at the hardware level
- it complements graphics applications that can do display rotation

The changes to core fbcon are minimal-- recognition of the console
rotation angle so it can swap directions, origins and axes (xres vs yres,
xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation
angle per display. The bulk of the code that does the actual drawing to the
screen are placed in separate files. Each angle of rotation has separate
methods (bmove, clear, putcs, cursor, update_start which is derived from
update_var, and clear_margins).  To mimimize processing time, the fontdata
are pre-rotated at each console switch (only if the font or the angle has
changed).

The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if
rotation is not needed.

Choosing the rotation angle can be done in several ways:

1. boot option fbcon=rotate:n, where
     n = 0 - normal
     n = 1 - 90 degrees (clockwise)
     n = 2 - 180 degrees (upside down)
     n = 3 - 270 degrees (counterclockwise)

2. echo n > /sys/class/graphics/fb[num]/con_rotate

     where n is the same as described above. It sets the angle of rotation
of the current console

3 echo n > /sys/class/graphics/fb[num]/con_rotate_all

     where n is the same as described above. Globally sets the angle of
rotation.

GOTCHAS:

	The option, especially at angles of 90 and 270 degrees, will exercise
the least used code of drivers.  Namely, at these angles, panning is done
in the x-axis, so it can reveal bugs in the driver if xpanstep is set
incorrectly. A workaround is to set xpanstep = 0.

	Secondly, at these angles, the framebuffer memory access can be
unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers
imageblit, fillrect and copyarea functions.  (I think cfbfillrect may have
this buglet). A workaround is to use a standard 8x16 font.

Speed:

	The scrolling speed difference between 0 and 180 degrees is minimal,
somewhere areound 1-2%.  At 90 or 270 degress, speed drops down to a vicinity
of 30-40%. This is understandable because the blit direction is across the
framebuffer "direction." Scrolling will be helped at these angles if xpanstep
is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2.

Note: The code is tested on little-endian only, so I don't know if it will
work in big-endian. Please let me know, it will take only less than a minute
of your time.

This patch prepares fbcon for console rotation and contains the following
changes:

- add rotate field in struct fbcon_ops to keep fbcon's current rotation
  angle

- add con_rotate field in struct display to store per-display rotation angle

- create a private copy of the current var to fbcon.  This will prevent
  fbcon from directly manipulating info->var, especially the fields xoffset,
  yoffset and vmode.

- add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc)
  depending on the rotation angle

- change global update_var() (function that sets the screen start address)
  as an fbcon method update_start.  This is required because the axes, start
  offset, and/or direction can be reversed depending on the rotation angle.

- add fbcon method rotate_font() which will rotate each character bitmap to
  the correct angle of rotation.

- add fbcon boot option 'rotate' to select the angle of rotation at bootime.
   Currently does nothing until all patches are applied.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Michael Hanselmann
1dfcdfae57 [PATCH] fbdev: Framebuffer mode required for PowerBook Titanium
This patch adds the framebuffer mode required for an Apple PowerBook G4
Titanium.

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas
6d83b0bb8e [PATCH] savagefb: X-panning fixes
The driver unconditionally sets xpanstep to 2.  However, a value of 4
empirically works better at bpp = 8, and 2 for 16 and 32.  This buglet was
exposed by the rotation code.

Second fix is the unconditional call to update_start() without verifying if
the offsets are correct.  Remove this call, it's not necessary and secondly,
it causes a crash with invalid values.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Russell King
2c25013495 [ARM] More sparse fixes
arch/arm/kernel/irq.c:998:26: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:145:25: warning: Using plain integer as NULL pointer
arch/arm/kernel/smp.c:362:5: warning: symbol 'smp_call_function_on_cpu' was not declared. Should it be static?
drivers/video/amba-clcd.c:521:12: warning: symbol 'amba_clcdfb_init' was not declared. Should it be static?

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 14:44:15 +00:00
David S. Miller
4c85ce522f [SPARC]: Remove bogus register programming in cg6 driver.
Don't write garbage into the overlay plane.

Noted by Bob Breuer.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-07 14:09:44 -08:00
Jesper Juhl
6044ec8882 [PATCH] kfree cleanup: misc remaining drivers
This is the remaining misc drivers/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in misc files in
drivers/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:05 -08:00
Ville Syrjl
f73195ad7e [PATCH] matroxfb: Set maxhipri to 0
The current init code sets hiprilvl to 0 and maxhipri to 5.  According to the
specs those values are illegal on both G200 and G400.  It also causes
distortions on the TV-out at least when CRTC2 is in YUV mode as is the case
with DirectFB.  This patch resets both values to 0.

Signed-off-by: Ville Syrjl <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Ville Syrjl
5ea8d9d038 [PATCH] matroxfb: Kill a useless message
No point in spamming the logs with a message about xres rounding.

Signed-off-by: Ville Syrjl <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Ville Syrjl
6c12f30554 [PATCH] matroxfb: Use CACHEFLUSH on all chips
Use the CACHEFLUSH register on all chip types.  The register is listed in all
other specs except 2064W.  However I have verified that the register does work
on a 2064W despite being marked reserved in the specs.  There were no
noticeable side effects after writing to the register.

Signed-off-by: Ville Syrjl <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Ville Syrjl
63921fbfbd [PATCH] matroxfb: Add support for Mystique AGP
Add new entries for Mystique AGP with the PCI ID 0x051e.

I don't actually have such boards but according to google they do exist.
Curiosly X.Org doesn't recognize that PCI ID.  And what's even more
interesting is that Matrox's own Windows drivers don't recognize it either.
After going through about a dozen different versions I did find one older
driver that does list this particular ID.  It is also listed in the pci.ids
file.

I'm not sure if non-220 AGP chips exist.  I left the chip revision check
intact for AGP chips nonetheless.

Signed-off-by: Ville Syrjl <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Ville Syrjl
b1e91fdf56 [PATCH] matroxfb: Remove an unused wait queue entry
wait_event_event_interruptible() uses a private wait queue entry so there's no
need for the caller to initialize one.

Signed-off-by: Ville Syrjl <syrjala@sci.fi>
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:54 -08:00
Jake Moilanen
183dee0f02 [PATCH] fbdev: ATI RN50 pci id
Here's the PCI ID for the ATI RN50 chip.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas
5ee1ef96a0 [PATCH] fbdev: Convert a few drivers to use the fb_find_best_display helper
Convert i810fb, nvidiafb and savagefb to use the fb_find_best_display helper
when searching for the initial video mode.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas
003cfc0c56 [PATCH] fbdev: Add helper to get an appropriate initial mode
Add new helper, fb_find_best_display(), which will search the modelist for the
best mode for the attached display.  This requires an EDID block that is
converted to struct fb_monspecs and a private modelist.  The search will be
done in this manner:

- if 1st detailed timing is preferred, use that
- else if dimensions of the display are known, use that to estimate xres and
- else if modelist has detailed timings, use the first detailed timing
- else, use the very first entry from the modelist

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Antonino A. Daplas
14c8102ffc [PATCH] fbdev: Rearrange mode database entries
Rearrange mode database entries such that preferred timings are entered first,
and less preferred timings are entered last.  (Detailed, VESA,
established/standard).

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Zach Smith
998e6d5116 [PATCH] fbcon: Add rl (Roman Large) font
I converted the "rl" console font from the kbd utility to be a built-in font
for the framebuffer console, and I was wondering if you would be OK with
including it.  I've generated a font_rl.c file and related minor
modifications.  I find it's the most visually appealing of the kbd fonts which
is why I use it and selected it for conversion.  I believe the font is GPL'd.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas
5fab851ea1 [PATCH] i810fb: Cleanup I2C code
- The functions for reading the 1st and 2nd bus are essentially the same,
  except for the register.  Consolidate them all.

- According to Nicolas Boichat, there is an undocumented 3rd i2c bus for
  attaching daughter cards.  Add support for this.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas
8a0934f296 [PATCH] vesafb: Disable mtrr as the default
vesafb occassionally gets the size wrong when setting the mtrr.  When X or DRI
attempts to set the mtrr, it will fail due to range overlap significantly
affecting their performance.  Disable mtrr and let the user explicitly enable
it with the mtrr:n option.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Ben Dooks
2726bff344 [PATCH] s3c2410fb: initialise device_driver .owner
Initialise the .owner field, so that if the driver is built as a module, the
system has a link to the owner

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Michal Januszewski
8fb6567e34 [PATCH] fbdev: fix the fb_find_nearest_mode() function
Currently the fb_find_nearest_mode() function finds a mode with screen
resolution closest to that described by the 'var' argument and with some
arbitrary refresh rate (eg.  in the following sequence of refresh rates: 70 60
53 85 75, 53 is selected).

This patch fixes the function so that it looks for the closest mode as far as
both resolution and refresh rate are concerned.  The function's first argument
is changed to fb_videomode so that the refresh rate can be specified by the
caller, as fb_var_screeninfo doesn't have any fields that could directly hold
this data.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas
2fe0175491 [PATCH] nvidiafb: Fix empty macro
Use do {} while(0) for empty reverse_order() macro.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas
475666d4f8 [PATCH] fbdev: Workaround for buggy EDID blocks
Some EDID blocks set the flag "prefer first detailed timing" without providing
any detailed timing at all.  Clear this flag if the block does not provide
detailed timings.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Peter 'p2' De Schrijver
9127fa2859 [PATCH] pm2fb: Manual configuration of timings for Elsa Winner 2000 Office
Attached is a small patch which configures the correct memory clock and
timings on the Elsa Winner 2000 Office pm2 based card.  This is necessary when
the card is used on a platform which does not support PC style BIOS
initialization.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
1cc650c69f [PATCH] savagefb: Convert from VGA IO access to MMIO access
Use MMIO registers instead of banging the VGA IO registers.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
1013d26663 [PATCH] atyfb: Get initial mode timings from LCD BIOS
Reported by: Jean-Philippe Gurard (Bugzilla Bug 1782)

"I've tried with video=atyfb:debug and video=atyfb:debug,mode:1280x600, \
nomtrr.

In both case, the screen stays black, but seems divided into 4 vertical bands.
 Some white lines pop up randomly on each vertical band."

The problem is a combination of an incorrect xclk plus lack of timing
information.  The adapter is attached to an LCD device that can do 1280x600
(which is not a standard resolution).  The global mode database does not have
an entry for it.  Fortunately, the Video BIOS contains the complete timing
info for this display, however, atyfb is not making use of it.

Add support to get the timing information from the BIOS, if available.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
eba5085045 [PATCH] vesafb: Fix color palette handling
Fix out-of-bounds bug.  The pseudopalette has room only for 16 entries, thus,
write only the first 16 entries to the pseudopalette.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
b4d8aea6d6 [PATCH] fbdev: Remove software clipping from drawing functions
Remove software clipping from imageblit, fillrect and copyarea.  Clipping is
not needed because the console layer assures that reads/writes doest not
happen beyond the extents of the framebuffer.  And software clipping tends to
hide bugs, if they do exist.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
dd0314f7bb [PATCH] fbcon: Initialize new driver when old driver is released
If machine has more than 1 driver installed, and they all drive the same
hardware, it's possible that the driver's fb_release() method will attempt to
restore the hardware state to the initial state.  This will leave the new
driver in an undefined state.  To prevent this problem, initialize the new
driver by calling fb_set_par() when the old driver is released by fbcon.

Signed-off-by: Antonino Daplas<adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
3084a895c2 [PATCH] fbcon: Use helper function when filling out var structure
Instead of manually filling up the fields in struct fb_var_screeninfo, use the
display_to_var() helper.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:51 -08:00
Antonino A. Daplas
4d9c5b6eb4 [PATCH] fbcon: Consolidate redundant code
Lot's of redundant code scattered throughout fbcon.c.  Consolidate them all
into one function, fbcon_update_softback().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00
Antonino A. Daplas
c465e05a03 [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00
Jean Delvare
e764a20196 [PATCH] radeonfb: prevent spurious recompilations
Prevent spurious recompilations of the radeonfb driver when I2C/DDC support
is not included and i2c header files are modified.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Scott MacKenzie
3a59026ba1 [PATCH] intelfb: extend partial support of i915G to include i915GM
Add partial support for GMA900 within the i915GM chipset.

Signed-off-by: Scott MacKenzie <irrational@poboxes.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Benjamin Herrenschmidt
b8c49ef6ae [PATCH] nvidiafb: Add flat panel dither support
nvidiafb didn't fully hook-up the code it borrowed from X for doing flat
panel dithering (this is useful for 6 bits panels).  This adds a driver
option to force it, and by default "reads" the current value from the chip
to get the firmware setting.  It significantly improves the quality of
images on the iMac G5 I have here (though the X driver doesn't yet "read"
the current value and defaults to 0, so you have to add Option "FBDither"
"true" to your X config file to get that, I'll try to fix X.org to "read"
the default unless specified asap).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Andrew Morton
7f8c54d20b [PATCH] nvidiafb-fix-mode-setting-ppc-support-warning-fixes
drivers/video/nvidia/nv_setup.c: In function `NVCommonSetup':
drivers/video/nvidia/nv_setup.c:408: warning: statement with no effect
drivers/video/nvidia/nv_setup.c:496: warning: statement with no effect
drivers/video/nvidia/nv_setup.c:504: warning: statement with no effect

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Benjamin Herrenschmidt
85f1503aff [PATCH] nvidiafb: Fix mode setting & PPC support
This patch fixes nvifiafb mode setting code to be closer to what the X
driver does, which actually makes it work on the 5200FX I have access to.
It also fix the routine that gets the EDID from Open Firmware on PPC, it
was broken in various ways and would crash at boot.  Compared to the patch
I posted to linux-fbdev last week, this one just changes a printk to be
closer to the other ones in the driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Randy Dunlap
ecc41d5e02 [PATCH] fb: straighten up fb drivers menu
Arrange frame buffer menu:
- puts all Epson drivers together
- removes split of FB_PXA and FB_PXA_PARAMETERS by FB_W100
- results in PXA, W100, Epson, S3C2410, & Virtual FB drivers being
  presented at the same menu level as all other FB drivers

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Randy.Dunlap
e65c0850ae [PATCH] framebuffer: add some help text in Kconfig
Frame buffer driver help text changes:
- Move S3 Trio next to S3 Savage;
- add or clarify help text for several FB drivers;
- add help text for FB console;
- add help text for bootup logos;

Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:49 -08:00
Linus Torvalds
6adfd34e85 Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel 2005-11-06 16:58:38 -08:00
Samuel Thibault
88dcb6c411 [PATCH] Set the vga cursor even when hidden
Some visually impaired people use hardware devices which directly read
the vga screen. When newt for instance asks to hide the cursor for
better visual aspect, the kernel puts the vga cursor out of the screen,
so that the cursor position can't be read by the hardware device. This
is a great loss for such people.

Here is a patch which uses the same technique as CUR_NONE for hiding the
cursor while still moving it.

Mario, you should apply it to the speakup kernel for access floppies
asap. I'll submit a 2.4 patch too.

Signed-off-by: samuel.thibault@ens-lyon.org
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05 13:30:03 -08:00
Russell King
2c119aa809 [DRIVER MODEL] Fix sgivwfb
Statically allocated devices in module data is a potential cause
of oopsen.  The device may be in use by a userspace process, which
will keep a reference to the device.  If the module is unloaded,
the module data will be freed.  Subsequent use of the platform
device will cause a kernel oops.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:22:39 +00:00
Russell King
abbf268ae8 [DRIVER MODEL] Fix gbefb
Statically allocated devices in module data is a potential cause
of oopsen.  The device may be in use by a userspace process, which
will keep a reference to the device.  If the module is unloaded,
the module data will be freed.  Subsequent use of the platform
device will cause a kernel oops.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:22:13 +00:00
Russell King
8d972a9621 [DRIVER MODEL] Fix arcfb
Release code in driver modules is a potential cause of oopsen.
The device may be in use by a userspace process, which will keep
a reference to the device.  If the module is unloaded, the module
text will be freed.  Subsequently, when the last reference is
dropped, the release code will be called, which no longer exists.

Use generic platform device allocation/release code in modules.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-05 21:21:38 +00:00
Calin A. Culianu
7015faa7df [PATCH] nvidiafb: Geforce 7800 series support added
This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver.  All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.

I also added the relevant PCI device ids to linux/pci_ids.h

I tested it on my 7800 GTX here and it works like a charm.  I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED.  ;)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04 18:01:34 -08:00
Russell King
e831556fb6 [ARM] AMBA CLCD driver can drive PL110 and PL111 primecells
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 14:40:35 +00:00
Linus Torvalds
4fd5f8267d Merge master.kernel.org:/home/rmk/linux-2.6-drvmodel
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31 07:32:56 -08:00
Paul Mackerras
23fd07750a Merge ../linux-2.6 by hand 2005-10-31 13:37:12 +11:00
Pozsar Balazs
1a66ddcb77 [PATCH] fix vgacon blanking
This patch fixes a long-standing vgacon bug: characters with the bright bit
set were left on the screen and not blacked out.  All I did was that I
lookuped up some examples on the net about setting the vga palette, and
added the call missing from the linux kernel, but included in all other
ones.  It works for me.

You can test this by writing something with the bright set to the
console, for example:
  echo -e "\e[1;31mhello there\e[0m"
and then wait for the console to blank itself (by default, after 10 mins
of inactivity), maybe making it faster using
  setterm -blank 1
so you only have to wait 1 minute.

Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:26 -08:00
Brian Gerst
0d078f6f96 [PATCH] CONFIG_IA32
Add CONFIG_X86_32 for i386.  This allows selecting options that only apply
to 32-bit systems.

(X86 && !X86_64) becomes X86_32
(X86 ||  X86_64) becomes X86

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:10 -08:00
Ralf Baechle
c5c96e1379 Fix build error caused by missmatching duplicate declaration.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:31 +01:00
Maciej W. Rozycki
a93500037e Fix dependencies for DECstation framebuffers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:19 +01:00
Pete Popov
3b495f2bb7 Au1100 FB driver uplift for 2.6.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Antonino Daplas <adaplas@pol.net>
2005-10-29 19:31:01 +01:00
Thiemo Seufer
6d7bf017e8 It helps to not use a _mem_ function for requesting I/O space.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:53 +01:00
Russell King
d052d1beff Create platform_device.h to contain all the platform device details.
Convert everyone who uses platform_bus_type to include
linux/platform_device.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29 19:07:23 +01:00
Roland Dreier
8b150478ae [PATCH] ppc: make phys_mem_access_prot() work with pfns instead of addresses
Change the phys_mem_access_prot() function to take a pfn instead of an
address.  This allows mmap64() to work on /dev/mem for addresses above 4G
on 32-bit architectures.  We start with a pfn in mmap_mem(), so there's no
need to convert to an address; in fact, it's actively bad, since the
conversion can overflow when the address is above 4G.

Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an
address by directly comparing to max_pfn.  Working with max_pfn instead of
high_memory fixes page_is_ram() to give the right answer for highmem pages.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 14:25:49 +10:00
Grant Coady
4153812fc1 [PATCH] pci_ids: macros: replace partial with whole symbols
pci_ids cleanup: replace symbols built by macros with whole symbols to
aid grep searches.

Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/video/cirrusfb.c |   24 ++++++++++++------------
 sound/oss/ymfpci.c       |   17 +++++++++--------
 sound/pci/bt87x.c        |   11 +++++++----
 3 files changed, 28 insertions(+), 24 deletions(-)
2005-10-28 15:36:59 -07:00
Linus Torvalds
84860bf064 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2005-10-28 13:09:47 -07:00
Greg KH
6fbfddcb52 Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
Linus Torvalds
8ed5759043 Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6 2005-10-28 10:08:46 -07:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Greg Kroah-Hartman
53f4654272 [PATCH] Driver Core: fix up all callers of class_device_create()
The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Russell King
c6b8fdad14 [ARM] 3/4: Remove asm/hardware.h from Versatile and Integrator io.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 14:05:16 +01:00
Kyle McMartin
e0f998930e Auto-update from upstream 2005-10-26 23:28:40 -04:00
James Simmons
c14e2cfc18 [PATCH] Return the line length via sysfs for fbdev
This small patch returns the stride/line length of the framebuffer via
sysfs.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-24 14:08:29 -07:00
Matthew Wilcox
951a015013 [PARISC] Reorganize sticore probe routine to be a little less convoluted
Fix some whitespace issues
Reorganise parisc_device probe routine to be a little less convoluted
Use ->hpa.start instead of ->hpa

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:41:49 -04:00
Grant Grundler
b2c1fe81df [PARISC] Allow STI_CONSOLE access to some FONTS
add || STI_CONSOLE to some of the basic FONTs. May need to get at
least one of them to default to "Y" for parisc.

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21 22:39:43 -04:00
Antonino A. Daplas
bb7e257ef8 [PATCH] vesafb: Fix display corruption on display blank
Reported by: Bob Tracy <rct@gherkin.frus.com>

 "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which
  I'm using the Vesa FB driver.  When the machine has been idle for some
  time and the driver attempts to powerdown the display, rather than the
  display going blank, it goes gray with several strange lines.  When I
  hit the "shift" key or other-wise wake up the display, the old video
  state is not fully restored..."

vesafb recently added a blank method which has only 2 states, powerup and
powerdown.  The powerdown state is used for all blanking levels, but in his
case, powerdown does not work correctly for higher levels of display
powersaving. Thus, for intermediate power levels, use software blanking,
and use only hardware blanking for an explicit powerdown.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18 08:43:29 -07:00
Linus Torvalds
1e65174a33 Add some basic .gitignore files
This still leaves driver and architecture-specific subdirectories alone,
but gets rid of the bulk of the "generic" generated files that we should
ignore.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18 08:26:15 -07:00
Samuel Thibault
0aec4867dc [PATCH] SVGATextMode fix
Fix bug 5441.

I didn't know about messy programs like svgatextmode...  Couldn't this be
integrated in some linux/drivers/video/console/svgacon.c ?...  So because
of the existence of the svgatextmode program, the kernel is not supposed to
touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ?

Disabling the check in vgacon_resize() might help indeed, but I'm really
not sure whether it will work for any chipset: in my patch, CRT registers
are set at each console switch, since stty rows/cols apply to consoles
separately...

The attached solution is to keep the test, but if it fails, we assume that
the caller knows what it does (i.e.  it is svgatextmode) and then disable
any further call to vgacon_doresize.  Svgatextmode is usually used to
_expand_ the display, not to shrink it.  And it is harmless in the case of
a too big stty rows/cols: the display will just be cropped.  I tested it on
my laptop, and it works fine with svgatextmode.

A better solution would be that svgatextmode explicitely tells the kernel
not to care about video timing, but for this an interface needs be defined
and svgatextmode be patched.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17 08:59:10 -07:00
Pavel Machek
6edb7467be [PATCH] zaurus: fix compilation with cpufreq disabled
This fixes compilation with CPU_FREQ disabled.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14 17:10:12 -07:00
Tom 'spot' Callaway
d85c3553df [SPARC]: Fix p9100 framebuffer in 2.6
The attached patch fixes the p9100 framebuffer so that text is viewable
(not black on black, like it was before the patch). The linux logo
displays for a very short period of time, then is replaced by a grey
box. This leads me to believe that this framebuffer would have problems
in X, but since there hasn't been a weitek driver for X in several
millennia, this isn't something that I can confirm or deny.

But this patch does get color console working on my SPARCbook 3TX.

Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 13:05:56 -07:00
Sven Henkel
14bfd1ff94 [PATCH] pmac/radeonfb: Add suspend support for M11 chip in new iBook 12"
This adds suspend support for the Radeon M11 chip in 12" iBooks
manufactured after July 2005.  I don't know if the new 14" iBooks also
have that chip, so they might also be supported.

The chip identifies itself as "RV350 NV" (pci id 0x4e56), revision 0x80.
Apple calls it "Snowy", xfree86 names it "ATI FireGL Mobility T2 (M11)
NV (AGP)".  So, we seem to be lucky here: The suspend-code for the M10
(which also is a "RV350 NV") works flawless for that chip.

Signed-off-by: Sven Henkel <shenkel@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01 17:01:48 -07:00
Linus Torvalds
c4a7c77fcb Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-09-30 08:43:13 -07:00
Linus Torvalds
1dd465cac8 Merge master.kernel.org:/home/rmk/linux-2.6-arm 2005-09-30 08:39:56 -07:00
David S. Miller
017fb98e70 [RADEON]: Fix unaligned I/O port access during probe.
The driver does a readl() on DEVICE_ID which is 2-byte aligned and
2-bytes in size.  It's doing this read just to flush write buffers.

Create IN16() and OUT16() macros, and use the former to do this I/O
load.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-29 19:26:51 -07:00
Ben Dooks
fe984bba30 [PATCH] s3c2410fb: Minor warning fix
The function s3c2410fb_activate_var does not return
a value, therefore it should be declared void.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:54:20 -07:00
Antonino A. Daplas
375726d7ed [PATCH] intelfb: Fix regression (blank display) from ioremap patch
- Workaround for the ioremap patch that produces a blank display on some
  chipsets
- Make hwcursor = 0 the default.  The hardware cursor does not work with all
  hardware.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:54:20 -07:00
Al Viro
be88ec74cb [PATCH] i810-i2c iomem annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:27 -07:00
Al Viro
775b048d09 [PATCH] cyblafb: portability fixes, sanitized work with pointers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-29 08:46:26 -07:00
Russell King
fc611a1a50 [ARM] Don't include mach-types.h unnecessarily
It's pointless to include mach-types.h if you're not going to use
anything from it.  These references were removed as a result of:

grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 11:15:51 +01:00
Russell King
ca5da71062 [ARM] pxafb: Remove #if DEBUG, convert DPRINTK to pr_debug
Fix warning:
 drivers/video/pxafb.h:119:5: warning: "DEBUG" is not defined
by removing the whole
 #if DEBUG
 #define DPRINTK(fmt, args...) printk...etc...
 #else
 #define DPRINTK(fmt, args...)
 #endif
stuff - we have pr_debug() for this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-29 09:44:54 +01:00
Andrew Morton
2601c2e278 [PATCH] atyfb c99 fix
- fix this:

  drivers/video/aty/xlinit.c: In function `atyfb_xl_init':
  drivers/video/aty/xlinit.c:256: warning: ISO C90 forbids mixed declarations and code

- repair some kooky coding style

- Use ARRAY_SIZE()

Cc: Tom 'spot' Callaway <tcallawa@redhat.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-23 13:35:36 -07:00
Linus Torvalds
2fe9f798ba Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-09-21 07:53:38 -07:00
Tom 'spot' Callaway
1a3e64aa48 [ATYFB]: Fix build with CONFIG_FB_ATY_GENERIC_LCD disabled.
Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-21 00:29:16 -07:00
Antonino A. Daplas
6d67e34de5 [PATCH] fbdev: Fix reversed back and front porches
In fbdev perspective, the frontporch is the lower/right margin and the
backporch is the upper/left margin.

Correct.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-20 17:36:38 -07:00
Antonino A. Daplas
7a482425f4 [PATCH] nvidiafb: Fix absence of cursor in nvidiafb
A recent change in nvidiafb caused nvidiafb_cursor to always return -ENXIO
instead of using the soft_cursor.  This will happen if the parameter "hwcur"
is not set, which happens to be the default.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-20 17:36:38 -07:00