Commit Graph

175 Commits

Author SHA1 Message Date
Uwe Kleine-König
21ae2956ce tree-wide: fix typos "aquire" -> "acquire", "cumsumed" -> "consumed"
This patch was generated by

	git grep -E -i -l '[Aa]quire' | xargs -r perl -p -i -e 's/([Aa])quire/$1cquire/'

and the cumsumed was found by checking the diff for aquire.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:57 +01:00
KAMEZAWA Hiroyuki
ef8745c1e7 memcg: reduce check for softlimit excess
In charge/uncharge/reclaim path, usage_in_excess is calculated repeatedly
and it takes res_counter's spin_lock every time.

This patch removes unnecessary calls for res_count_soft_limit_excess.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:13 -07:00
KAMEZAWA Hiroyuki
4e649152cb memcg: some modification to softlimit under hierarchical memory reclaim.
This patch clean up/fixes for memcg's uncharge soft limit path.

Problems:
  Now, res_counter_charge()/uncharge() handles softlimit information at
  charge/uncharge and softlimit-check is done when event counter per memcg
  goes over limit. Now, event counter per memcg is updated only when
  memory usage is over soft limit. Here, considering hierarchical memcg
  management, ancesotors should be taken care of.

  Now, ancerstors(hierarchy) are handled in charge() but not in uncharge().
  This is not good.

  Prolems:
  1. memcg's event counter incremented only when softlimit hits. That's bad.
     It makes event counter hard to be reused for other purpose.

  2. At uncharge, only the lowest level rescounter is handled. This is bug.
     Because ancesotor's event counter is not incremented, children should
     take care of them.

  3. res_counter_uncharge()'s 3rd argument is NULL in most case.
     ops under res_counter->lock should be small. No "if" sentense is better.

Fixes:
  * Removed soft_limit_xx poitner and checks in charge and uncharge.
    Do-check-only-when-necessary scheme works enough well without them.

  * make event-counter of memcg incremented at every charge/uncharge.
    (per-cpu area will be accessed soon anyway)

  * All ancestors are checked at soft-limit-check. This is necessary because
    ancesotor's event counter may never be modified. Then, they should be
    checked at the same time.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:13 -07:00
KAMEZAWA Hiroyuki
26251eaf98 memcg: fix refcnt going negative
__mem_cgroup_largest_soft_limit_node() returns a mem_cgroup_per_zone "mz"
with incremnted mz->mem->css's refcnt.  Then, the caller of this function
has to call css_put(mz->mem->css).

But, mz can be !NULL even if "not found" i.e.  without css_get().  By
this, css->refcnt will go down to minus.

This may cause various things...one of results will be
initite-loop in css_tryget()  as this.

INFO: RCU detected CPU 0 stall (t=10000 jiffies)
sending NMI to all CPUs:
NMI backtrace for cpu 0
CPU 0:
<snip>

 <<EOE>>  <IRQ>  [<ffffffff810884bd>] trace_hardirqs_off+0xd/0x10
  [<ffffffff8102a940>] flat_send_IPI_mask+0x90/0xb0
  [<ffffffff8102a9c9>] flat_send_IPI_all+0x69/0x70
  [<ffffffff81027372>] arch_trigger_all_cpu_backtrace+0x62/0xa0
  [<ffffffff810bff8e>] __rcu_pending+0x7e/0x370
  [<ffffffff810c02c7>] rcu_check_callbacks+0x47/0x130
  [<ffffffff81063a26>] update_process_times+0x46/0x70
  [<ffffffff81085930>] tick_sched_timer+0x60/0x160
  [<ffffffff810858d0>] ? tick_sched_timer+0x0/0x160
  [<ffffffff8107a03a>] __run_hrtimer+0xba/0x150
  [<ffffffff8107a325>] hrtimer_interrupt+0xd5/0x1b0
  [<ffffffff81426dfe>] ? trace_hardirqs_off_thunk+0x3a/0x3c
  [<ffffffff8142cacd>] smp_apic_timer_interrupt+0x6d/0x9b
  [<ffffffff8100cb33>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff811317b6>] ? mem_cgroup_walk_tree+0x156/0x180
  [<ffffffff811316d3>] ? mem_cgroup_walk_tree+0x73/0x180
  [<ffffffff81131692>] ? mem_cgroup_walk_tree+0x32/0x180
  [<ffffffff81131a00>] ? mem_cgroup_get_local_stat+0x0/0x110
  [<ffffffff81131d5b>] ? mem_control_stat_show+0x14b/0x330
  [<ffffffff810a57fd>] ? cgroup_seqfile_show+0x3d/0x60

Above shows CPU0 caught in css_tryget()'s inifinite loop because
of bad refcnt.

This is a fix to set mz=NULL at the top of retry path.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:12 -07:00
Daisuke Nishimura
1dd3a27326 memcg: show swap usage in stat file
We now count MEM_CGROUP_STAT_SWAPOUT, so we can show swap usage.  It would
be useful for users to show swap usage in memory.stat file, because they
don't need calculate memsw.usage - res.usage to know swap usage.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Balbir Singh
0c3e73e84f memcg: improve resource counter scalability
Reduce the resource counter overhead (mostly spinlock) associated with the
root cgroup.  This is a part of the several patches to reduce mem cgroup
overhead.  I had posted other approaches earlier (including using percpu
counters).  Those patches will be a natural addition and will be added
iteratively on top of these.

The patch stops resource counter accounting for the root cgroup.  The data
for display is derived from the statisitcs we maintain via
mem_cgroup_charge_statistics (which is more scalable).  What happens today
is that, we do double accounting, once using res_counter_charge() and once
using memory_cgroup_charge_statistics().  For the root, since we don't
implement limits any more, we don't need to track every charge via
res_counter_charge() and check for limit being exceeded and reclaim.

The main mem->res usage_in_bytes can be derived by summing the cache and
rss usage data from memory statistics (MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE).  However, for memsw->res usage_in_bytes, we need
additional data about swapped out memory.  This patch adds a
MEM_CGROUP_STAT_SWAPOUT and uses that along with MEM_CGROUP_STAT_RSS and
MEM_CGROUP_STAT_CACHE to derive the memsw data.  This data is computed
recursively when hierarchy is enabled.

The tests results I see on a 24 way show that

1. The lock contention disappears from /proc/lock_stats
2. The results of the test are comparable to running with
   cgroup_disable=memory.

Here is a sample of my program runs

Without Patch

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7192804.124144  task-clock-msecs         #     23.937 CPUs
         424691  context-switches         #      0.000 M/sec
            267  CPU-migrations           #      0.000 M/sec
       28498113  page-faults              #      0.004 M/sec
  5826093739340  cycles                   #    809.989 M/sec
   408883496292  instructions             #      0.070 IPC
     7057079452  cache-references         #      0.981 M/sec
     3036086243  cache-misses             #      0.422 M/sec

  300.485365680  seconds time elapsed

With cgroup_disable=memory

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7182183.546587  task-clock-msecs         #     23.915 CPUs
         425458  context-switches         #      0.000 M/sec
            203  CPU-migrations           #      0.000 M/sec
       92545093  page-faults              #      0.013 M/sec
  6034363609986  cycles                   #    840.185 M/sec
   437204346785  instructions             #      0.072 IPC
     6636073192  cache-references         #      0.924 M/sec
     2358117732  cache-misses             #      0.328 M/sec

  300.320905827  seconds time elapsed

With this patch applied

 Performance counter stats for '/home/balbir/parallel_pagefault':

 7191619.223977  task-clock-msecs         #     23.955 CPUs
         422579  context-switches         #      0.000 M/sec
             88  CPU-migrations           #      0.000 M/sec
       91946060  page-faults              #      0.013 M/sec
  5957054385619  cycles                   #    828.333 M/sec
  1058117350365  instructions             #      0.178 IPC
     9161776218  cache-references         #      1.274 M/sec
     1920494280  cache-misses             #      0.267 M/sec

  300.218764862  seconds time elapsed

Data from Prarit (kernel compile with make -j64 on a 64
CPU/32G machine)

For a single run

Without patch

real 27m8.988s
user 87m24.916s
sys 382m6.037s

With patch

real    4m18.607s
user    84m58.943s
sys     50m52.682s

With config turned off

real    4m54.972s
user    90m13.456s
sys     50m19.711s

NOTE: The data looks counterintuitive due to the increased performance
with the patch, even over the config being turned off. We probably need
more runs, but so far all testing has shown that the patches definitely
help.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Balbir Singh
4e41695356 memory controller: soft limit reclaim on contention
Implement reclaim from groups over their soft limit

Permit reclaim from memory cgroups on contention (via the direct reclaim
path).

memory cgroup soft limit reclaim finds the group that exceeds its soft
limit by the largest number of pages and reclaims pages from it and then
reinserts the cgroup into its correct place in the rbtree.

Add additional checks to mem_cgroup_hierarchical_reclaim() to detect long
loops in case all swap is turned off.  The code has been refactored and
the loop check (loop < 2) has been enhanced for soft limits.  For soft
limits, we try to do more targetted reclaim.  Instead of bailing out after
two loops, the routine now reclaims memory proportional to the size by
which the soft limit is exceeded.  The proportion has been empirically
determined.

[akpm@linux-foundation.org: build fix]
[kamezawa.hiroyu@jp.fujitsu.com: fix softlimit css refcnt handling]
[nishimura@mxp.nes.nec.co.jp: refcount of the "victim" should be decremented before exiting the loop]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Balbir Singh
75822b4495 memory controller: soft limit refactor reclaim flags
Refactor mem_cgroup_hierarchical_reclaim()

Refactor the arguments passed to mem_cgroup_hierarchical_reclaim() into
flags, so that new parameters don't have to be passed as we make the
reclaim routine more flexible

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Balbir Singh
f64c3f5494 memory controller: soft limit organize cgroups
Organize cgroups over soft limit in a RB-Tree

Introduce an RB-Tree for storing memory cgroups that are over their soft
limit.  The overall goal is to

1. Add a memory cgroup to the RB-Tree when the soft limit is exceeded.
   We are careful about updates, updates take place only after a particular
   time interval has passed
2. We remove the node from the RB-Tree when the usage goes below the soft
   limit

The next set of patches will exploit the RB-Tree to get the group that is
over its soft limit by the largest amount and reclaim from it, when we
face memory contention.

[hugh.dickins@tiscali.co.uk: CONFIG_CGROUP_MEM_RES_CTLR=y CONFIG_PREEMPT=y fails to boot]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Balbir Singh
296c81d89f memory controller: soft limit interface
Add an interface to allow get/set of soft limits.  Soft limits for memory
plus swap controller (memsw) is currently not supported.  Resource
counters have been enhanced to support soft limits and new type
RES_SOFT_LIMIT has been added.  Unlike hard limits, soft limits can be
directly set and do not need any reclaim or checks before setting them to
a newer value.

Kamezawa-San raised a question as to whether soft limit should belong to
res_counter.  Since all resources understand the basic concepts of hard
and soft limits, it is justified to add soft limits here.  Soft limits are
a generic resource usage feature, even file system quotas support soft
limits.

Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
KAMEZAWA Hiroyuki
261fb61a8b memcg: add comments explaining memory barriers
Add comments for the reason of smp_wmb() in mem_cgroup_commit_charge().

[akpm@linux-foundation.org: coding-style fixes]
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:58 -07:00
Balbir Singh
4b3bde4c98 memcg: remove the overhead associated with the root cgroup
Change the memory cgroup to remove the overhead associated with accounting
all pages in the root cgroup.  As a side-effect, we can no longer set a
memory hard limit in the root cgroup.

A new flag to track whether the page has been accounted or not has been
added as well.  Flags are now set atomically for page_cgroup,
pcg_default_flags is now obsolete and removed.

[akpm@linux-foundation.org: fix a few documentation glitches]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:58 -07:00
Ben Blum
be367d0992 cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time
Alter the ss->can_attach and ss->attach functions to be able to deal with
a whole threadgroup at a time, for use in cgroup_attach_proc.  (This is a
pre-patch to cgroup-procs-writable.patch.)

Currently, new mode of the attach function can only tell the subsystem
about the old cgroup of the threadgroup leader.  No subsystem currently
needs that information for each thread that's being moved, but if one were
to be added (for example, one that counts tasks within a group) this bit
would need to be reworked a bit to tell the subsystem the right
information.

[hidave.darkstar@gmail.com: fix build]
Signed-off-by: Ben Blum <bblum@google.com>
Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:58 -07:00
Johannes Weiner
b7c46d151c mm: drop unneeded double negations
Remove double negations where the operand is already boolean.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:35 -07:00
KAMEZAWA Hiroyuki
887032670d cgroup avoid permanent sleep at rmdir
After commit ec64f51545 ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts.  That commit expects all
refs after pre_destroy() is temporary but...it wasn't.  Then, rmdir can
wait permanently.  This patch tries to fix that and change followings.

 - set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
 - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
   if there are sleeping ones, wakes them up.
 - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.

Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:35 -07:00
Jens Axboe
8aa7e847d8 Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
KAMEZAWA Hiroyuki
2ffebca6aa memcg: fix lru rotation in isolate_pages
Try to fix memcg's lru rotation sanity: make memcg use the same logic as
the global LRU does.

Now, at __isolate_lru_page() retruns -EBUSY, the page is rotated to the
tail of LRU in global LRU's isolate LRU pages.  But in memcg, it's not
handled.  This makes memcg do the same behavior as global LRU and rotate
LRU in the page is busy.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:48 -07:00
KAMEZAWA Hiroyuki
22a668d7c3 memcg: fix behavior under memory.limit equals to memsw.limit
A user can set memcg.limit_in_bytes == memcg.memsw.limit_in_bytes when the
user just want to limit the total size of applications, in other words,
not very interested in memory usage itself.  In this case, swap-out will
be done only by global-LRU.

But, under current implementation, memory.limit_in_bytes is checked at
first and try_to_free_page() may do swap-out.  But, that swap-out is
useless for memsw.limit_in_bytes and the thread may hit limit again.

This patch tries to fix the current behavior at memory.limit ==
memsw.limit case.  And documentation is updated to explain the behavior of
this special case.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:48 -07:00
KAMEZAWA Hiroyuki
8a9478ca7f memcg: fix swap accounting
This patch fixes mis-accounting of swap usage in memcg.

In the current implementation, memcg's swap account is uncharged only when
swap is completely freed.  But there are several cases where swap cannot
be freed cleanly.  For handling that, this patch changes that memcg
uncharges swap account when swap has no references other than cache.

By this, memcg's swap entry accounting can be fully synchronous with the
application's behavior.

This patch also changes memcg's hooks for swap-out.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
Li Zefan
338c843108 memcg: remove some redundant checks
We don't need to check do_swap_account in the case that the function which
checks do_swap_account will never get called if do_swap_account == 0.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
Balbir Singh
d69b042f3d memcg: add file-based RSS accounting
Add file RSS tracking per memory cgroup

We currently don't track file RSS, the RSS we report is actually anon RSS.
 All the file mapped pages, come in through the page cache and get
accounted there.  This patch adds support for accounting file RSS pages.
It should

1. Help improve the metrics reported by the memory resource controller
2. Will form the basis for a future shared memory accounting heuristic
   that has been proposed by Kamezawa.

Unfortunately, we cannot rename the existing "rss" keyword used in
memory.stat to "anon_rss".  We however, add "mapped_file" data and hope to
educate the end user through documentation.

[hugh.dickins@tiscali.co.uk: fix mem_cgroup_update_mapped_file_stat oops]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
Rik van Riel
56e49d2188 vmscan: evict use-once pages first
When the file LRU lists are dominated by streaming IO pages, evict those
pages first, before considering evicting other pages.

This should be safe from deadlocks or performance problems
because only three things can happen to an inactive file page:

1) referenced twice and promoted to the active list
2) evicted by the pageout code
3) under IO, after which it will get evicted or promoted

The pages freed in this way can either be reused for streaming IO, or
allocated for something else.  If the pages are used for streaming IO,
this pageout pattern continues.  Otherwise, we will fall back to the
normal pageout pattern.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Elladan <elladan@eskimo.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:38 -07:00
Nikanth Karthikesan
46f7e602fb memcg: fix build warning and avoid checking for mem != null again and again
Fix build warning, "mem_cgroup_is_obsolete defined but not used" when
CONFIG_DEBUG_VM is not set.  Also avoid checking for !mem again and again.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:03 -07:00
Daisuke Nishimura
e767e0561d memcg: fix deadlock between lock_page_cgroup and mapping tree_lock
mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
		interrupted
			-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
		-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Daisuke Nishimura
ae3abae64f memcg: fix mem_cgroup_shrink_usage()
Current mem_cgroup_shrink_usage() has two problems.

1. It doesn't call mem_cgroup_out_of_memory and doesn't update
   last_oom_jiffies, so pagefault_out_of_memory invokes global OOM.

2. Considering hierarchy, shrinking has to be done from the
   mem_over_limit, not from the memcg which the page would be charged to.

mem_cgroup_try_charge_swapin() does all of these things properly, so we
use it and call cancel_charge_swapin when it succeeded.

The name of "shrink_usage" is not appropriate for this behavior, so we
change it too.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:09 -07:00
Daisuke Nishimura
c0bd3f63ce memcg: fix try_get_mem_cgroup_from_swapcache()
This is a bugfix for commit 3c776e6466
("memcg: charge swapcache to proper memcg").

Used bit of swapcache is solid under page lock, but considering
move_account, pc->mem_cgroup is not.

We need lock_page_cgroup() anyway.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 15:36:09 -07:00
KAMEZAWA Hiroyuki
a8031cb00e memcg: remove warning when CONFIG_DEBUG_VM=n
mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used

[akpm@linux-foundation.org: simplify as suggested by Balbir]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Daisuke Nishimura
83aae4c737 memcg: cleanup cache_charge
Current mem_cgroup_cache_charge is a bit complicated especially
in the case of shmem's swap-in.

This patch cleans it up by using try_charge_swapin and commit_charge_swapin.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
KAMEZAWA Hiroyuki
a3b2d69269 cgroups: use css id in swap cgroup for saving memory v5
Try to use CSS ID for records in swap_cgroup.  By this, on 64bit machine,
size of swap_cgroup goes down to 2 bytes from 8bytes.

This means, when 2GB of swap is equipped, (assume the page size is 4096bytes)

	From size of swap_cgroup = 2G/4k * 8 = 4Mbytes.
	To   size of swap_cgroup = 2G/4k * 2 = 1Mbytes.

Reduction is large.  Of course, there are trade-offs.  This CSS ID will
add overhead to swap-in/swap-out/swap-free.

But in general,
  - swap is a resource which the user tend to avoid use.
  - If swap is never used, swap_cgroup area is not used.
  - Reading traditional manuals, size of swap should be proportional to
    size of memory. Memory size of machine is increasing now.

I think reducing size of swap_cgroup makes sense.

Note:
  - ID->CSS lookup routine has no locks, it's under RCU-Read-Side.
  - memcg can be obsolete at rmdir() but not freed while refcnt from
    swap_cgroup is available.

Changelog v4->v5:
 - reworked on to memcg-charge-swapcache-to-proper-memcg.patch
Changlog ->v4:
 - fixed not configured case.
 - deleted unnecessary comments.
 - fixed NULL pointer bug.
 - fixed message in dmesg.

[nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
Daisuke Nishimura
3c776e6466 memcg: charge swapcache to proper memcg
memcg_test.txt says at 4.1:

	This swap-in is one of the most complicated work. In do_swap_page(),
	following events occur when pte is unchanged.

	(1) the page (SwapCache) is looked up.
	(2) lock_page()
	(3) try_charge_swapin()
	(4) reuse_swap_page() (may call delete_swap_cache())
	(5) commit_charge_swapin()
	(6) swap_free().

	Considering following situation for example.

	(A) The page has not been charged before (2) and reuse_swap_page()
	    doesn't call delete_from_swap_cache().
	(B) The page has not been charged before (2) and reuse_swap_page()
	    calls delete_from_swap_cache().
	(C) The page has been charged before (2) and reuse_swap_page() doesn't
	    call delete_from_swap_cache().
	(D) The page has been charged before (2) and reuse_swap_page() calls
	    delete_from_swap_cache().

	    memory.usage/memsw.usage changes to this page/swp_entry will be
	 Case          (A)      (B)       (C)     (D)
         Event
       Before (2)     0/ 1     0/ 1      1/ 1    1/ 1
          ===========================================
          (3)        +1/+1    +1/+1     +1/+1   +1/+1
          (4)          -       0/ 0       -     -1/ 0
          (5)         0/-1     0/ 0     -1/-1    0/ 0
          (6)          -       0/-1       -      0/-1
          ===========================================
       Result         1/ 1     1/ 1      1/ 1    1/ 1

       In any cases, charges to this page should be 1/ 1.

In case of (D), mem_cgroup_try_get_from_swapcache() returns NULL
(because lookup_swap_cgroup() returns NULL), so "+1/+1" at (3) means
charges to the memcg("foo") to which the "current" belongs.
OTOH, "-1/0" at (4) and "0/-1" at (6) means uncharges from the memcg("baa")
to which the page has been charged.

So, if the "foo" and "baa" is different(for example because of task move),
this charge will be moved from "baa" to "foo".

I think this is an unexpected behavior.

This patch fixes this by modifying mem_cgroup_try_get_from_swapcache()
to return the memcg to which the swapcache has been charged if PCG_USED bit
is set.
IIUC, checking PCG_USED bit of swapcache is safe under page lock.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
KOSAKI Motohiro
c137b5ece4 memcg: remove mem_cgroup_calc_mapped_ratio()
Currently, mem_cgroup_calc_mapped_ratio() is unused at all.  it can be
removed and KAMEZAWA-san suggested it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
Balbir Singh
e222432bfa memcg: show memcg information during OOM
Add RSS and swap to OOM output from memcg

Display memcg values like failcnt, usage and limit when an OOM occurs due
to memcg.

Thanks to Johannes Weiner, Li Zefan, David Rientjes, Kamezawa Hiroyuki,
Daisuke Nishimura and KOSAKI Motohiro for review.

Sample output
-------------

Task in /a/x killed as a result of limit of /a
memory: usage 1048576kB, limit 1048576kB, failcnt 4183
memory+swap: usage 1400964kB, limit 9007199254740991kB, failcnt 0

[akpm@linux-foundation.org: compilation fix]
[akpm@linux-foundation.org: fix kerneldoc and whitespace]
[akpm@linux-foundation.org: add printk facility level]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
KAMEZAWA Hiroyuki
0b7f569e45 memcg: fix OOM killer under memcg
This patch tries to fix OOM Killer problems caused by hierarchy.
Now, memcg itself has OOM KILL function (in oom_kill.c) and tries to
kill a task in memcg.

But, when hierarchy is used, it's broken and correct task cannot
be killed. For example, in following cgroup

	/groupA/	hierarchy=1, limit=1G,
		01	nolimit
		02	nolimit
All tasks' memory usage under /groupA, /groupA/01, groupA/02 is limited to
groupA's 1Gbytes but OOM Killer just kills tasks in groupA.

This patch provides makes the bad process be selected from all tasks
under hierarchy. BTW, currently, oom_jiffies is updated against groupA
in above case. oom_jiffies of tree should be updated.

To see how oom_jiffies is used, please check mem_cgroup_oom_called()
callers.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: const fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
KAMEZAWA Hiroyuki
81d39c20f5 memcg: fix shrinking memory to return -EBUSY by fixing retry algorithm
As pointed out, shrinking memcg's limit should return -EBUSY after
reasonable retries.  This patch tries to fix the current behavior of
shrink_usage.

Before looking into "shrink should return -EBUSY" problem, we should fix
hierarchical reclaim code.  It compares current usage and current limit,
but it only makes sense when the kernel reclaims memory because hit
limits.  This is also a problem.

What this patch does are.

  1. add new argument "shrink" to hierarchical reclaim. If "shrink==true",
     hierarchical reclaim returns immediately and the caller checks the kernel
     should shrink more or not.
     (At shrinking memory, usage is always smaller than limit. So check for
      usage < limit is useless.)

  2. For adjusting to above change, 2 changes in "shrink"'s retry path.
     2-a. retry_count depends on # of children because the kernel visits
	  the children under hierarchy one by one.
     2-b. rather than checking return value of hierarchical_reclaim's progress,
	  compares usage-before-shrink and usage-after-shrink.
	  If usage-before-shrink <= usage-after-shrink, retry_count is
	  decremented.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
KAMEZAWA Hiroyuki
14067bb3e2 memcg: hierarchical stat
Clean up memory.stat file routine and show "total" hierarchical stat.

This patch does
  - renamed get_all_zonestat to be get_local_zonestat.
  - remove old mem_cgroup_stat_desc, which is only for per-cpu stat.
  - add mcs_stat to cover both of per-cpu/per-lru stat.
  - add "total" stat of hierarchy (*)
  - add a callback system to scan all memcg under a root.
== "total" is added.
[kamezawa@localhost ~]$ cat /opt/cgroup/xxx/memory.stat
cache 0
rss 0
pgpgin 0
pgpgout 0
inactive_anon 0
active_anon 0
inactive_file 0
active_file 0
unevictable 0
hierarchical_memory_limit 50331648
hierarchical_memsw_limit 9223372036854775807
total_cache 65536
total_rss 192512
total_pgpgin 218
total_pgpgout 155
total_inactive_anon 0
total_active_anon 135168
total_inactive_file 61440
total_active_file 4096
total_unevictable 0
==
(*) maybe the user can do calc hierarchical stat by his own program
   in userland but if it can be written in clean way, it's worth to be
   shown, I think.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
KAMEZAWA Hiroyuki
04046e1a0a memcg: use CSS ID
Assigning CSS ID for each memcg and use css_get_next() for scanning hierarchy.

	Assume folloing tree.

	group_A (ID=3)
		/01 (ID=4)
		   /0A (ID=7)
		/02 (ID=10)
	group_B (ID=5)
	and task in group_A/01/0A hits limit at group_A.

	reclaim will be done in following order (round-robin).
	group_A(3) -> group_A/01 (4) -> group_A/01/0A (7) -> group_A/02(10)
	-> group_A -> .....

	Round robin by ID. The last visited cgroup is recorded and restart
	from it when it start reclaim again.
	(More smart algorithm can be implemented..)

	No cgroup_mutex or hierarchy_mutex is required.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:55 -07:00
KAMEZAWA Hiroyuki
ec64f51545 cgroup: fix frequent -EBUSY at rmdir
In following situation, with memory subsystem,

	/groupA use_hierarchy==1
		/01 some tasks
		/02 some tasks
		/03 some tasks
		/04 empty

When tasks under 01/02/03 hit limit on /groupA, hierarchical reclaim
is triggered and the kernel walks tree under groupA. In this case,
rmdir /groupA/04 fails with -EBUSY frequently because of temporal
refcnt from the kernel.

In general. cgroup can be rmdir'd if there are no children groups and
no tasks. Frequent fails of rmdir() is not useful to users.
(And the reason for -EBUSY is unknown to users.....in most cases)

This patch tries to modify above behavior, by
	- retries if css_refcnt is got by someone.
	- add "return value" to pre_destroy() and allows subsystem to
	  say "we're really busy!"

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:54 -07:00
KAMEZAWA Hiroyuki
299b4eaa30 memcg: NULL pointer dereference at rmdir on some NUMA systems
N_POSSIBLE doesn't means there is memory...and force_empty can
visit invalid node which have no pgdat.

To visit all valid nodes, N_HIGH_MEMORY should be used.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29 18:04:44 -08:00
Daisuke Nishimura
7bcc1bb123 memcg: get/put parents at create/free
The lifetime of struct cgroup and struct mem_cgroup is different and
mem_cgroup has its own reference count for handling references from
swap_cgroup.

This causes strange problem that the parent mem_cgroup dies while child
mem_cgroup alive, and this problem causes a bug in case of
use_hierarchy==1 because res_counter_uncharge climbs up the tree.

This patch is for avoiding it by getting the parent at create, and putting
it at freeing.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-29 18:04:43 -08:00
Li Zefan
068b38c1fa memcg: fix a race when setting memory.swappiness
(suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60)

echo 10 > /memcg/0/swappiness   |
  mem_cgroup_swappiness_write() |
    ...                         | echo 1 > /memcg/0/use_hierarchy
                                | mkdir /mnt/0/1
                                |   sub_memcg->swappiness = 60;
    memcg->swappiness = 10;     |

In the above scenario, we end up having 2 different swappiness
values in a single hierarchy.

We should hold cgroup_lock() when cheking cgrp->children list.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:41 -08:00
Li Zefan
0eb253e223 memcg: fix section mismatch
At system boot when creating the top cgroup, mem_cgroup_create() calls
enable_swap_cgroup() which is marked as __init, so mark
mem_cgroup_create() as __ref to avoid false section mismatch warning.

Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:41 -08:00
Daisuke Nishimura
4d1c627389 memcg: make oom less frequently
In previous implementation, mem_cgroup_try_charge checked the return
value of mem_cgroup_try_to_free_pages, and just retried if some pages
had been reclaimed.
But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it)
only checks whether the usage is less than the limit.

This patch tries to change the behavior as before to cause oom less
frequently.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:39 -08:00
Daisuke Nishimura
c268e9946d memcg: fix hierarchical reclaim
If root_mem has no children, last_scaned_child is set to root_mem itself.
But after some children added to root_mem, mem_cgroup_get_next_node can
mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get.

This patch fixes this behavior by:

- Set last_scanned_child to NULL if root_mem has no children or DFS
  search has returned to root_mem itself(root_mem is not a "child" of
  root_mem).  Make mem_cgroup_get_first_node return root_mem in this case.
   There are no mem_cgroup_get/put for root_mem.

- Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and
  mem_cgroup_get_first_node to mem_cgroup_get_next_node.  Make
  mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:39 -08:00
Daisuke Nishimura
40d58138f8 memcg: fix error path of mem_cgroup_move_parent
There is a bug in error path of mem_cgroup_move_parent.

Extra refcnt got from try_charge should be dropped, and usages incremented
by try_charge should be decremented in both error paths:

    A: failure at get_page_unless_zero
    B: failure at isolate_lru_page

This bug makes this parent directory unremovable.

In case of A, rmdir doesn't return, because res.usage doesn't go down to 0
at mem_cgroup_force_empty even after all the pc in lru are removed.

In case of B, rmdir fails and returns -EBUSY, because it has extra ref
counts even after res.usage goes down to 0.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:39 -08:00
Daisuke Nishimura
bd112db872 memcg: fix mem_cgroup_get_reclaim_stat_from_page
In case of swapin, a new page is added to lru before it is charged,
so page->pc->mem_cgroup points to NULL or last mem_cgroup the page
was charged before.

In the latter case, if the mem_cgroup has already freed by rmdir,
the area pointed to by page->pc->mem_cgroup may have invalid data.

Actually, I saw general protection fault.

    general protection fault: 0000 [#1] SMP
    last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map
    CPU 4
    Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode]
    Pid: 26038, comm: page01 Tainted: G        W  2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1
    RIP: 0010:[<ffffffff8028e710>]  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
    RSP: 0000:ffff8801ee457da8  EFLAGS: 00010002
    RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8
    RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28
    RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001
    R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000
    R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2
    FS:  00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960)
    Stack:
     ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17
     ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000
     ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8
    Call Trace:
     [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c
     [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89
     [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98
     [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741
     [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c
     [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c
     [<ffffffff804d860f>] ? page_fault+0x1f/0x30
    Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54
    RIP  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
     RSP <ffff8801ee457da8>

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-15 16:39:39 -08:00
Paul Menage
2cb378c862 cgroups: use hierarchy_mutex in memory controller
Update the memory controller to use its hierarchy_mutex rather than
calling cgroup_lock() to protected against cgroup_mkdir()/cgroup_rmdir()
from occurring in its hierarchy.

Signed-off-by: Paul Menage <menage@google.com>
Tested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki
b5a84319a4 memcg: fix shmem's swap accounting
Now, you can see following even when swap accounting is enabled.

 1. Create Group 01, and 02.
 2. allocate a "file" on tmpfs by a task under 01.
 3. swap out the "file" (by memory pressure)
 4. Read "file" from a task in group 02.
 5. the charge of "file" is moved to group 02.

This is not ideal behavior. This is because SwapCache which was loaded
by read-ahead is not taken into account..

This is a patch to fix shmem's swapcache behavior.
  - remove mem_cgroup_cache_charge_swapin().
  - Add SwapCache handler routine to mem_cgroup_cache_charge().
    By this, shmem's file cache is charged at add_to_page_cache()
    with GFP_NOWAIT.
  - pass the page of swapcache to shrink_mem_cgroup.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki
544122e5e0 memcg: fix LRU accounting for SwapCache
Now, a page can be deleted from SwapCache while do_swap_page().
memcg-fix-swap-accounting-leak-v3.patch handles that, but, LRU handling is
still broken.  (above behavior broke assumption of memcg-synchronized-lru
patch.)

This patch is a fix for LRU handling (especially for per-zone counters).
At charging SwapCache,
 - Remove page_cgroup from LRU if it's not used.
 - Add page cgroup to LRU if it's not linked to.

Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki
54595fe265 memcg: use css_tryget in memcg
From:KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

css_tryget() newly is added and we can know css is alive or not and get
refcnt of css in very safe way.  ("alive" here means "rmdir/destroy" is
not called.)

This patch replaces css_get() to css_tryget(), where I cannot explain
why css_get() is safe. And removes memcg->obsolete flag.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00
KAMEZAWA Hiroyuki
a7ba0eef3a memcg: fix double free and make refcnt sane
1. Fix double-free BUG in error route of mem_cgroup_create().
    mem_cgroup_free() itself frees per-zone-info.
 2. Making refcnt of memcg simple.
    Add 1 refcnt at creation and call free when refcnt goes down to 0.

Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:10 -08:00