Commit Graph

52 Commits

Author SHA1 Message Date
Dave Airlie
34db18abd3 Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-next
* 'intel/drm-intel-next' of ../drm-next: (755 commits)
  drm/i915: Only wait on a pending flip if we intend to write to the buffer
  drm/i915/dp: Sanity check eDP existence
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
  drm/i915: Don't save/restore hardware status page address register
  drm/i915: don't store the reg value for HWS_PGA
  drm/i915: fix memory corruption with GM965 and >4GB RAM
  Linux 2.6.38-rc7
  Revert "TPM: Long default timeout fix"
  drm/i915: Re-enable GPU semaphores for SandyBridge mobile
  drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#"
  Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU"
  drm/i915: Allow relocation deltas outside of target bo
  drm/i915: Silence an innocuous compiler warning for an unused variable
  fs/block_dev.c: fix new kernel-doc warning
  ACPI: Fix build for CONFIG_NET unset
  mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
  x86: Use u32 instead of long to set reset vector back to 0
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
2011-03-14 14:15:13 +10:00
Daniel Vetter
7e4d15d90a drm/radeon: introduce gem_to_radeon_bo helper
... and switch it to container_of upcasting.

v2: converted new pageflip code-paths.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:34:47 +10:00
Dave Airlie
e40b6fc837 drm/radeon/kms: align height of fb allocation.
this aligns the height of the fb allocation so it doesn't trip
over the size checks later when we use this from userspace to
copy the buffer at X start.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23 10:08:17 +10:00
Dave Airlie
ff72145bad drm: dumb scanout create/mmap for intel/radeon (v3)
This is just an idea that might or might not be a good idea,
it basically adds two ioctls to create a dumb and map a dumb buffer
suitable for scanout. The handle can be passed to the KMS ioctls to create
a framebuffer.

It looks to me like it would be useful in the following cases:
a) in development drivers - we can always provide a shadowfb fallback.
b) libkms users - we can clean up libkms a lot and avoid linking
to libdrm_*.
c) plymouth via libkms is a lot easier.

Userspace bits would be just calls + mmaps. We could probably
mark these handles somehow as not being suitable for acceleartion
so as top stop people who are dumber than dumb.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07 12:16:14 +10:00
Dave Airlie
3632ef8909 Revert "drm: Update fbdev fb_fix_screeninfo"
This reverts commit dfe63bb0ad.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 16:10:28 -08:00
James Simmons
dfe63bb0ad drm: Update fbdev fb_fix_screeninfo
If you change the color depth via fbset or some other framebuffer aware
userland application struct fb_fix_screeninfo is not updated to this new
information. This patch fixes this issue. Also the function is changed to
just pass in struct drm_framebuffer so in the future we could use more
fields. I'm hoping some day fix->smem* could be set here :-)

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07 13:44:40 +10:00
Dave Airlie
4f125010d2 Merge branch 'master' of /home/airlied/kernel/linux-2.6 into drm-core-next 2011-01-05 08:31:08 +10:00
James Simmons
57084d0537 drm/fb: Don't expose mmio for fbdev emulation layer
For the fbdev api if the struct fb_var_screeninfo accel_flags field is set
to FB_ACCELF_TEXT then userland applications can not mmap the mmio region.
Since it is a bad idea for DRM drivers to expose the mmio region via the
fbdev layer we always set the accel_flags to prevent this. Please apply.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21 12:49:44 +10:00
Dave Airlie
68d3059665 drm/radeon: use aperture size not vram size for overlap tests
This fixes a problem where the wrong card conflicts with vesafb in my
x2 system.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-20 10:54:48 +10:00
Dave Airlie
b7ae5056c9 Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-next
Conflicts:
	drivers/gpu/drm/i915/intel_fb.c
	drivers/gpu/drm/radeon/r600_blit_kms.c
	drivers/gpu/drm/ttm/ttm_bo.c
2010-10-19 09:48:34 +10:00
Dave Airlie
dab8dcfa3c drm: don't drop handle reference on unload
since the handle references are all tied to a file_priv, and when it disappears
all the handle refs go with it.

The fbcon ones we'd only notice on unload, but the nouveau notifier one
would would happen on reboot.

nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
i915 unload: Reported-by: Keith Packard <keithp@keithp.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-07 14:01:17 +10:00
Chris Ball
4dd19b0dd7 drm/radeon/kms: Implement KDB debug hooks for radeon KMS.
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06 11:50:08 +10:00
Dave Airlie
29d08b3efd drm/gem: handlecount isn't really a kref so don't make it one.
There were lots of places being inconsistent since handle count
looked like a kref but it really wasn't.

Fix this my just making handle count an atomic on the object,
and have it increase the normal object kref.

Now i915/radeon/nouveau drivers can drop the normal reference on
userspace object creation, and have the handle hold it.

This patch fixes a memory leak or corruption on unload, because
the driver had no way of knowing if a handle had been actually
added for this object, and the fbcon object needed to know this
to clean itself up properly.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-01 09:17:44 +10:00
Linus Torvalds
ee005577aa Merge branch 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits)
  drm/radeon/kms: fix typo in radeon_compute_pll_gain
  drm/radeon/kms: try to detect tv vs monitor for underscan
  drm/radeon/kms: fix sideport detection on newer rs880 boards
  drm/radeon: fix passing wrong type to gem object create.
  drm/radeon/kms: set encoder type to DVI for HDMI on evergreen
  drm/radeon/kms: add back missing break in info ioctl
  drm/radeon/kms: don't enable MSIs on AGP boards
  drm/radeon/kms: fix agp mode setup on cards that use pcie bridges
  drm: move dereference below check
  drm: fix end of loop test
  drm/radeon/kms: rework radeon_dp_detect() logic
  drm/radeon/kms: add missing asic callback assignment for evergreen
  drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c
  drm/radeon/kms/pm: bail early if nothing's changing
  drm/radeon/kms/atom: clean up dig atom handling
  drm/radeon/kms: DCE3/4 transmitter fixes
  drm/radeon/kms: rework encoder handling
  drm/radeon/kms: DCE3/4 AdjustPixelPll updates
  drm/radeon: Fix stack data leak
  drm/radeon/kms: fix GTT/VRAM overlapping test
  ...
2010-08-23 18:28:03 -07:00
Dave Airlie
4dfe947e74 drm/radeon: fix passing wrong type to gem object create.
We are passing a ttm type when we want to pass true/false.

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-23 08:27:47 +10:00
Jesse Barnes
8fd4bd2235 vt/console: try harder to print output when panicing
Jesse's initial patch commit said:

"At panic time (i.e.  when oops_in_progress is set) we should try a bit
harder to update the screen and make sure output gets to the VT, since
some drivers are capable of flipping back to it.

So make sure we try to unblank and update the display if called from a
panic context."

I've enhanced this to add a flag to the vc that console layer can set to
indicate they want this behaviour to occur.  This also adds support to
fbcon for that flag and adds an fb flag for drivers to indicate they want
to use the support.  It enables this for KMS drivers.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10 13:47:40 -07:00
Chris Wilson
5a79395b27 drm: Propagate error from drm_fb_helper_init().
The previous commit fixes the problem, these commits make sure we actually
fail properly if it happens again.

I've squashed the commits from Chris since they are all fixing one issue.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:32:02 +10:00
Dave Airlie
eb1f8e4f3b drm/fbdev: rework output polling to be back in the core. (v4)
After thinking it over a lot it made more sense for the core to deal with
the output polling especially so it can notify X.

v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings.

v3: add config lock take inside polling, add intel/nouveau poll init/fini calls

v4: config lock was a bit agressive, only needed around connector list reading.
otherwise it could re-enter.

glisse: discard drm_helper_hpd_irq_event

v3: Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 17:40:11 +10:00
Marcin Slusarz
1471ca9aa7 fbdev: allow passing more than one aperture for handoff
It removes a hack from nouveau code which had to detect which
region to pass to kick vesafb/efifb.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18 16:19:27 +10:00
Dave Airlie
7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
James Simmons
b1f201980e drm/fb: remove drm_fb_helper_setcolreg
This patch is against the drm-fbdevfix1 branch. It removes the
drm_fb_helper_setcolreg function. The reason is that fb_setcolreg is only
used in the case where fb_setcmap is called and no fb_ops->fb_setcmap is
used. In the drm case we always need a fb_setcmap hook to handle multiple
crtcs so we don't need a fb_setcolreg hook. Please apply.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-08 10:09:50 +10:00
Dave Airlie
4abe35204a drm/kms/fb: use slow work mechanism for normal hotplug also.
a) slow work is always used now for any fbcon hotplug, as its not
   a fast task and is more suited to being ran under slow work.

b) attempt to not do any fbdev changes when X is running as we'll
   just mess it up. This hooks set_par to hopefully do the changes
   once X hands control to fbdev.

This also adds the nouveau/intel hotplug support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:30:38 +10:00
Dave Airlie
5c4426a782 drm/kms/fb: add polling support for when nothing is connected.
When we are running in a headless environment we have no idea what
output the user might plug in later, we only have hotplug detect
from the digital outputs. So if we detect no connected outputs at
initialisation, start a slow work operation to poll every 5 seconds
for an output.

this is only hooked up for radeon so far, on hw where we have full
hotplug detection there is no need for this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:29:52 +10:00
Dave Airlie
0b4c0f3f0e drm/kms/fb: separate fbdev connector list from core drm connectors
This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:28:01 +10:00
Dave Airlie
8be48d924c drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
This move to using the list of crtcs in the fb helper and cleans up the
whole picking code, now we store the crtc/connectors we want directly
into the modeset and we use the modeset directly to set the mode.

Fixes from James Simmons and Ben Skeggs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:24:56 +10:00
Dave Airlie
386516744b drm/fb: fix fbdev object model + cleanup properly.
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:21:03 +10:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dave Airlie
1c62233508 Merge branch 'gpu-switcher' of /ssd/git//linux-2.6 into drm-next-stage
* 'gpu-switcher' of /ssd/git//linux-2.6:
  vga_switcheroo: initial implementation (v15)
  fb: for framebuffer handover don't exit the loop early.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/radeon/Makefile
	drivers/gpu/drm/radeon/radeon.h
2010-03-01 16:22:38 +10:00
Dave Airlie
6a9ee8af34 vga_switcheroo: initial implementation (v15)
Many new laptops now come with 2 gpus, one to be used for low power
modes and one for gaming/on-ac applications. These GPUs are typically
wired to the laptop panel and VGA ports via a multiplexer unit which
is controlled via ACPI methods.

4 combinations of systems typically exist - with 2 ACPI methods.
Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method
ATI/ATI - some ASUS - use ATPX ACPI Method
Intel/Nvidia - - use _DSM ACPI method
Nvidia/Nvidia -  - use _DSM ACPI method.

TODO:
This patch adds support for the ATPX method and initial bits
for the _DSM methods that need to written by someone with
access to the hardware.
Add a proper non-debugfs interface - need to get some proper
testing first.

v2: add power up/down support for both devices
on W500 puts i915/radeon into D3 and cuts power to radeon.

v3: redo probing methods, no DMI list, drm devices call to
register with switcheroo, it tries to find an ATPX method on
any device and once there is two devices + ATPX it inits the
switcher.

v4: ATPX msg handling using buffers - should work on more machines

v5: rearchitect after more mjg59 discussion - move ATPX handling to
    radeon driver.

v6: add file headers + initial nouveau bits (to be filled out).

v7: merge delayed switcher code.

v8: avoid suspend/resume of gpu that is off

v9: rearchitect - mjg59 is always right. - move all ATPX code to
radeon, should allow simpler DSM also proper ATRM handling

v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv

v11: fix bug in resuming Intel for 2nd time.

v12: start fixing up nvidia code blindly.

v13: blindly guess at finishing nvidia code

v14: remove radeon audio hacks - fix up intel resume more like upstream

v15: clean up printks + remove unnecessary igd/dis pointers

mount debugfs

/sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected
 + 2 cards.

DIS - immediate change to discrete
IGD - immediate change to IGD
DDIS - delayed change to discrete
DIGD - delayed change to IGD
ON - turn on not in use
OFF - turn off not in use

Tested on W500 (Intel/ATI) and T500 (Intel/ATI)

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:20:37 +10:00
Dave Airlie
eb6b6d7cdd Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
  drm/radeon/kms: update new pll algo
  drm/radeon/kms: add support for square microtiles on r3xx-r5xx
  drm/radeon/kms: force pinning buffer into visible VRAM
  drm/radeon/kms/evergreen: fix typo in cursor code
  drm/radeon/kms: implement reading active PCIE lanes on R600+
  drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
  drm/radeon/kms: simplify storing current and requested PM mode
  drm/radeon: fixes for r6xx/r7xx gfx init
  drm/radeon/rv740: fix backend setup
  drm/radeon/kms: fix R3XX/R4XX memory controller initialization
  [rfc] drm/radeon/kms: pm debugging check for vbl.
  drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
  drm: Add generic multipart buffer.
  drm/radeon/kms: simplify memory controller setup V2
  drm/radeon: Add asic hook for dma copy to r200 cards.
  drm/radeon/kms: Create asic structure for r300 pcie cards.
  drm/radeon/kms: remove unused r600_gart_clear_page
  drm/radeon/kms: remove HDP flushes from fence emit (v2)
  drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
  drm/radeon/kms: simplify picking power state
  ...

Conflicts:
	drivers/gpu/drm/radeon/atom.c
	drivers/gpu/drm/radeon/atombios.h
	drivers/gpu/drm/radeon/atombios_dp.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/r600_audio.c
	drivers/gpu/drm/radeon/r600_cp.c
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/radeon_ring.c
	drivers/gpu/drm/radeon/rv770.c
2010-02-26 16:23:23 +10:00
Jerome Glisse
d594e46ace drm/radeon/kms: simplify memory controller setup V2
Get rid of _location and use _start/_end also simplify the
computation of vram_start|end & gtt_start|end. For R1XX-R2XX
we place VRAM at the same address of PCI aperture, those GPU
shouldn't have much memory and seems to behave better when
setup that way. For R3XX and newer we place VRAM at 0. For
R6XX-R7XX AGP we place VRAM before or after AGP aperture this
might limit to limit the VRAM size but it's very unlikely.
For IGP we don't change the VRAM placement.

Tested on (compiz,quake3,suspend/resume):
PCI/PCIE:RV280,R420,RV515,RV570,RV610,RV710
AGP:RV100,RV280,R420,RV350,RV620(RPB*),RV730
IGP:RS480(RPB*),RS690,RS780(RPB*),RS880

RPB: resume previously broken

V2 correct commit message to reflect more accurately the bug
and move VRAM placement to 0 for most of the GPU to avoid
limiting VRAM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-18 14:49:35 +10:00
Dave Airlie
0a4583eb98 Merge branch 'drm-radeon-linus' of ../drm-next
* 'drm-radeon-linus' of ../drm-next:
  drm/radeon/kms: retry auxch on 0x20 timeout value.
  drm/radeon: Skip dma copy test in benchmark if card doesn't have dma engine.
  drm/radeon/kms: fix screen clearing before fbcon.
  drm/radeon/kms: add quirk for VGA without DDC on rv730 XFX card.
  drm/radeon/kms: don't crash if no DDC bus on VGA/DVI connector.
  drm/radeon/kms: change Kconfig text to reflect the new option.
  drm/radeon/kms: suspend and resume audio stuff
2010-02-11 14:03:51 +10:00
Dave Airlie
6719fc663c drm/radeon/kms: fix screen clearing before fbcon.
This memset_io was added to debug something way back and got
left behind, memset the fb to black so the borders don't be all white.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 11:25:27 +10:00
Alex Deucher
18917b60bc drm/radeon/kms: consolidate crtc count in rdev
Set the number of crtcs in rdev at crtc init and use it
whenever we need the crtc count rather than recalculating
it everytime.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:32:25 +10:00
Linus Torvalds
3ef884b4c0 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits)
  drm/radeon/kms: fix warning about cur_placement being uninitialised.
  drm/ttm: Print debug information on memory manager when eviction fails
  drm: Add memory manager debug function
  drm/radeon/kms: restore surface registers on resume.
  drm/radeon/kms/r600/r700: fallback gracefully on ucode failure
  drm/ttm: Initialize eviction placement in case the driver callback doesn't
  drm/radeon/kms: cleanup structure and module if initialization fails
  drm/radeon/kms: actualy set the eviction placements we choose
  drm/radeon/kms: Fix NULL ptr dereference
  drm/radeon/kms/avivo: add support for new pll selection algo
  drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup
  drm/radeon/kms: fix return value from fence function.
  drm/radeon: Remove tests for -ERESTART from the TTM code.
  drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
  drm/radeon/kms: Convert radeon to new TTM validation API (V2)
  drm/ttm: Rework validation & memory space allocation (V3)
  drm: Add search/get functions to get a block in a specific range
  drm/radeon/kms: fix avivo tiling regression since radeon object rework
  drm/i915: Remove a debugging printk from hangcheck
  drm/radeon/kms: make sure i2c id matches
  ...
2009-12-10 21:56:47 -08:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Jerome Glisse
4c78867912 drm/radeon/kms: Rework radeon object handling
The locking & protection of radeon object was somewhat messy.
This patch completely rework it to now use ttm reserve as a
protection for the radeon object structure member. It also
shrink down the various radeon object structure by removing
field which were redondant with the ttm information. Last it
converts few simple functions to inline which should with
performances.

airlied: rebase on top of r600 and other changes.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 14:00:18 +10:00
Dave Airlie
47381156a8 drm/radeon/kms: pick 8bpp console when 32MB or less VRAM
making the pinned console smaller gives X a bit more room to play with.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-02 11:37:10 +10:00
Dave Airlie
b8c00ac5b5 drm/fb: add more correct 8/16/24/32 bpp fb support.
The previous patches had some unwanted side effects, I've fixed
the lack of 32bpp working, and fixed up 16bpp so it should also work.

this also adds the interface to allow the driver to set a preferred
console depth so for example low memory rn50 can set it to 8bpp.
It also catches 24bpp on cards that can't do it and forces 32bpp.

Tested on r100/r600/i945.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06 13:54:01 +10:00
Dave Airlie
068143d388 drm/fb: add setcmap and fix 8-bit support.
This adds support for the setcmap api and fixes the 8bpp
support at least on radeon hardware. It adds a new load_lut
hook which can be called once the color map is setup.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:59 +10:00
Dave Airlie
dfee5614e4 drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
Also add single crtc for RN50 chips.

changes in v2:
fix vblank init to respect single crtc flag
fix r100 mode bandwidth to respect single crtc flag

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:58 +10:00
Dave Airlie
d50ba256b5 drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]

This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.

video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.

The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.

video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.

The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Michel Dänzer
c88f9f0c91 drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:01:59 +10:00
Dave Airlie
2f9a60d766 drm/radeon/kms: set fbdev_info for suspend/resume
this hopefully will bring back suspend/resume under kms.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-11 18:35:38 +10:00
Dave Airlie
785b93ef8c drm/kms: move driver specific fb common code to helper functions (v2)
Initially I always meant this code to be shared, but things
ran away from me before I got to it.

This refactors the i915 and radeon kms fbdev interaction layers
out into generic helpers + driver specific pieces.

It moves all the panic/sysrq enhancements to the core file,
and stores a linked list of kernel fbs. This could possibly be
improved to only store the fb which has fbcon on it for panics
etc.

radeon retains some specific codes used for a big endian
workaround.

changes:
fix oops in v1
fix freeing path for crtc_info

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:31 +10:00
Dave Airlie
bf8e828b00 drm/radeon/kms: memset the allocated framebuffer before using it.
This gets rid of some ugliness, we shuold probably find a way
for the GPU to zero this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:32 +10:00
Dave Airlie
ed8f0d9e70 drm/radeon: set fb aperture sizes for framebuffer handoff.
This will allow efi/vesa to handoff to radeon.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-29 17:07:38 +10:00
Dave Airlie
e024e11070 drm/radeon/kms: add initial colortiling support.
This adds new set/get tiling interfaces where the pitch
and macro/micro tiling enables can be set. Along with
a flag to decide if this object should have a surface when mapped.

The only thing we need to allocate with a mapped surface should be
the frontbuffer. Note rotate scanout shouldn't require one, and
back/depth shouldn't either, though mesa needs some fixes.

It fixes the TTM interfaces along Thomas's suggestions, and I've tested
the surface stealing code with two X servers and not seen any lockdep issues.

I've stopped tiling the fbcon frontbuffer, as I don't see there being
any advantage other than testing, I've left the testing commands in there,
just flip the fb_tiled to true in radeon_fb.c

Open: Can we integrate endian swapping in with this?

Future features:
texture tiling - need to relocate texture registers TXOFFSET* with tiling info.

This also merges Michel's cleanup surfaces regs at init time patch
even though it makes sense on its own, this patch really relies on it.

Some PowerMac firmwares set up a tiling surface at the beginning of VRAM
which messes us up otherwise.
that patch is:
Signed-off-by: Michel Dänzer <daenzer@vmware.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-29 15:42:18 +10:00
Michel Dänzer
61b576dbbe drm/radeon: Endianness fixes for radeondrmfb.
For now handle it via r/g/b offsets and disallow 16 bpp modes on big endian
machines.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:17 +10:00
Michel Dänzer
696d4df1db drm/radeon: Don't initialize acceleration related fields of struct fb_info.
Might lure userspace into trying silly things otherwise.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24 16:09:52 +10:00