Commit Graph

991 Commits

Author SHA1 Message Date
Linus Torvalds
3ed43c745d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits)
  Blackfin Serial Driver: abstract away DLAB differences into header
  Blackfin Serial Driver: macro away the IER differences between processors
  [Blackfin] arch: remove useless IRQ_SW_INT defines
  [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined
  [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined
  [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver
  [Blackfin] arch: Set spi flash partition on bf527 as like bf548.
  [Blackfin] arch: fix bug - Remove module will not free L1 memory used
  [Blackfin] arch: fix wrong header name in comment
  [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount
  [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit
  [Blackfin] arch: Add physmap partition for BF527-EZkit
  [Blackfin] arch: fix gdb testing regression
  [Blackfin] arch: disable single stepping when delivering a signal
  [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c.
  [Blackfin] arch: In the double fault handler, set up the PT_RETI slot
  [Blackfin] arch: Support for CPU_FREQ and NOHZ
  [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
  [Blackfin] arch: fix bug -  breaking the atomic sections code.
  [Blackfin] arch: Equalize include files: Add VR_CTL masks
  ...
2008-05-09 10:34:00 -07:00
Linus Torvalds
a9545ee3c8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...
2008-05-09 08:07:58 -07:00
Tetsuo Handa
55d7b68996 serial: access after NULL check in uart_flush_buffer()
I noticed that

  static void uart_flush_buffer(struct tty_struct *tty)
  {
  	struct uart_state *state = tty->driver_data;
  	struct uart_port *port = state->port;
  	unsigned long flags;

  	/*
  	 * This means you called this function _after_ the port was
  	 * closed.  No cookie for you.
  	 */
  	if (!state || !state->info) {
  		WARN_ON(1);
  		return;
  	}

is too late for checking state != NULL.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-08 10:46:55 -07:00
Magnus Damm
3d2c2f3ef7 sh-sci: avoid writing to nonexistent registers
Only write to hardware in SCI_OUT() if the register size is valid.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:59 +09:00
Magnus Damm
9b4e466f93 sh-sci: sh7722 lacks scsptr registers
The sh7722 serial ports all lack SCSPTR registers, so mark them as
nonexistent in the register table.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:58 +09:00
Magnus Damm
346b746300 sh-sci: improve sh7722 support
Improve sh7722 support for SCIF1 and SCIF2 and separate code
from sh7366 implementation.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:57 +09:00
Paul Mundt
85f094ecb1 sh: Enable use of the clk fwk on SH-5.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:42 +09:00
Mike Frysinger
45828b812d Blackfin Serial Driver: abstract away DLAB differences into header
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Mike Frysinger
89bf6dc51a Blackfin Serial Driver: macro away the IER differences between processors
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Linus Torvalds
bf640be423 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Delete prom_stdin and prom_stdout.
  sparc32: More memory probing consolidation.
  sparc32: Kill totally unused memory information tables.
  sparc64: Fix syscall restart, for real...
  serial: Fix sparc driver name strings.
  sparc64: Stop creating dummy root PCI host controller devices.
2008-05-03 10:05:11 -07:00
Linus Torvalds
c36c804559 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Bolt in SLB entry for kernel stack on secondary cpus
  [POWERPC] PS3: Update ps3_defconfig
  [POWERPC] PS3: Remove unsupported wakeup sources
  [POWERPC] PS3: Make ps3_virq_setup and ps3_virq_destroy static
  [POWERPC] PS3: Add time include to lpm
  [POWERPC] Fix slb.c compile warnings
  [POWERPC] Xilinx: Fix compile warnings
  [POWERPC] Squash build warning for print of resource_size_t in fsl_soc.c
  [RAPIDIO] fix current kernel-doc notation
  [POWERPC] 86xx: mpc8610_hpcd: add support for PCI Express x8 slot
  Fix a potential issue in mpc52xx uart driver
  [POWERPC] mpc5200: Allow for fixed speed MII configurations
  [POWERPC] 86xx: Fix the wrong serial1 interrupt for 8610 board
2008-05-03 10:01:33 -07:00
David S. Miller
32039f4954 serial: Fix sparc driver name strings.
They were all "serial" so if multiple of these drivers registered,
we'd trigger sysfs directory creation errors:

[    1.695793] proc_dir_entry 'serial' already registered
[    1.695839] Call Trace:
[    1.831891]  [00000000004f2534] create_proc_entry+0x7c/0x98
[    1.833608]  [00000000004f3a58] proc_tty_register_driver+0x40/0x70
[    1.833663]  [0000000000594700] tty_register_driver+0x1fc/0x208
[    1.835371]  [00000000005aade4] uart_register_driver+0x134/0x16c
[    1.841762]  [00000000005ac274] sunserial_register_minors+0x34/0x68
[    1.841818]  [00000000007db2a4] sunsu_init+0xf8/0x150
[    1.867697]  [00000000007c62a4] kernel_init+0x190/0x330
[    1.939147]  [0000000000426cf8] kernel_thread+0x38/0x48
[    1.939198]  [00000000006a0d90] rest_init+0x18/0x5c

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-02 05:22:51 -07:00
Andrew Liu
fbe543b412 Fix a potential issue in mpc52xx uart driver
mpc52xx_uart_int and __uart_put_char both try to acquire the
port->lock. Therefore the function sequence of:

mpc52xx_uart_int--> ...-->flush_to_ldisc-->...-->__uart_put_char

can potentially trigger a deadlock. To avoid this deadlock a fix
similar to that found in the 8250.c serial driver is applied. The
deadlock is avoided by releasing the lock before pushing a buffer
and reacquiring it when completed.

Signed-off-by: Andrew Liu <shengping.liu@windriver.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-05-01 11:59:12 -06:00
Scott Kilau
99da9047e6 jsm: add new supported board to jsm serial driver
Add new PCI Express Neo/JSM board to the supported list of drivers in
the JSM driver.

Signed-off-by: Scott Kilau <scottk@digi.com>
Acked-by: Ananda V <avenkat@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:04:01 -07:00
Alan Cox
6f441fe998 8250: switch 8250 drivers to use _nocache ioremaps
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:04:00 -07:00
Linus Torvalds
ec31b21241 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix crashkernel= handling when no crashkernel= specified
  [POWERPC] Make emergency stack safe for current_thread_info() use
  [POWERPC] spufs: add .gitignore for spu_save_dump.h & spu_restore_dump.h
  [POWERPC] spufs: trace spu_acquire_saved events
  [POWERPC] spufs: fix marker name for find_victim
  [POWERPC] spufs: add marker for destroy_spu_context
  [POWERPC] spufs: add sputrace marker parameter names
  [POWERPC] spufs: add context switch notification log
  [POWERPC] mpc5200: defconfigs for CM5200, Lite5200B, Motion-PRO and TQM5200
  [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format
  [POWERPC] mpc5200: Fix FEC error handling on FIFO errors
  [POWERPC] mpc5200: add Phytec pcm030 board support
  [POWERPC] mpc5200: add gpiolib support for mpc5200
  [POWERPC] mpc5200: add interrupt type function
  [POWERPC] mpc5200: Fix unterminated of_device_id table
2008-04-30 08:37:40 -07:00
Harvey Harrison
71cc2c2152 serial: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:54 -07:00
Alan Cox
f34d7a5b70 tty: The big operations rework
- Operations are now a shared const function block as with most other Linux
  objects

- Introduce wrappers for some optional functions to get consistent behaviour

- Wrap put_char which used to be patched by the tty layer

- Document which functions are needed/optional

- Make put_char report success/fail

- Cache the driver->ops pointer in the tty as tty->ops

- Remove various surplus lock calls we no longer need

- Remove proc_write method as noted by Alexey Dobriyan

- Introduce some missing sanity checks where certain driver/ldisc
  combinations would oops as they didn't check needed methods were present

[akpm@linux-foundation.org: fix fs/compat_ioctl.c build]
[akpm@linux-foundation.org: fix isicom]
[akpm@linux-foundation.org: fix arch/ia64/hp/sim/simserial.c build]
[akpm@linux-foundation.org: fix kgdb]
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:47 -07:00
Alan Cox
23d22cea85 serial: switch the serial core to int put_char methods
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:47 -07:00
Alan Cox
09a6ffa84c serial m68k: put_char returns
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:45 -07:00
Alan Cox
978e595f88 tty/serial: lay the foundations for the next set of reworks
- Stop drivers calling their own flush method indirectly, it obfuscates code
  and it will change soon anyway

- A few more lock_kernel paths temporarily needed in some driver internal
  waiting code

- Remove private put_char method that does a write call for one char - we
  have that anyway

- Most but not yet all of the termios copy under lock fixing (some has other
  dependencies to follow)

- Note a few locking bugs in drivers found in the process

- Kill remaining [ab]users of TIOCG/SSOFTCAR in the driver, these must go to
  fix the termios locking

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:45 -07:00
Alan Cox
e523844260 serial_core: Prepare for BKL push down
Instead of checking for the BKL in these methods, take it ourselves.  That
avoids propogating it into the serial drivers and we can then fix them later
on.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:40 -07:00
Alan Cox
c0754c99a6 68360serial: Note that there isn't any info->mcr locking
Noticed while auditing the code for the BKL elimination project

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:40 -07:00
Bryan Wu
2f3517418d Blackfin serial driver: this driver enable SPORTs on Blackfin emulate UART
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:30 -07:00
Linus Torvalds
d973664992 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits)
  [ARM] pxa: fix 1c104e0e4f
  [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
  [ARM] am79c961a: platform_get_irq() may return signed unnoticed
  [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()
  [ARM] Feroceon: fix function alignment in proc-feroceon.S
  [ARM] Orion: catch a couple more alternative spellings of PCIe
  [ARM] Orion: fix orion-ehci platform resource end addresses
  [ARM] Orion: fix ->map_irq() PCIe bus number check
  [ARM] Orion: fix ioremap() optimization
  [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check
  [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check
  kprobes/arm: fix decoding of arithmetic immediate instructions
  kprobes/arm: fix cache flush address for instruction stub
  [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2
  [ARM] 5021/1: at91: buildfix for sam9263 + PM
  [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation
  [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263
  [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake()
  [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
  [ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
  ...
2008-04-29 15:18:06 -07:00
Grant Likely
bc775eac63 [POWERPC] mpc5200: Fix unterminated of_device_id table
If CONFIG_PPC_MPC5121 is not set, then the of_device_id table for the
mpc5200 serial driver will not get terminated with a NULL entry.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-29 07:16:18 -06:00
Roel Kluin
681587c586 [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed
port->irq is unsigned, platform_get_irq() may return signed unnoticed

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28 21:24:45 +01:00
Linus Torvalds
e31a94ed37 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (45 commits)
  [MIPS] Pb1200/DBAu1200: move platform code to its proper place
  [MIPS] Fix handling of trap and breakpoint instructions
  [MIPS] Pb1200: do register SMC 91C111
  [MIPS] DBAu1200: fix bad SMC 91C111 resource size
  [NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532
  [MIPS] IP27: Fix build bug due to missing include
  [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c
  [MIPS] cevt-gt641xx: Kill unnecessary include
  [MIPS] DS1287: Add clockevent driver
  [MIPS] add DECstation I/O ASIC clocksource
  [MIPS] rbtx4938: minor cleanup
  [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro
  [MIPS] rbtx4938: misc cleanups
  [MIPS] jmr3927: use generic txx9 gpio
  [MIPS] rbhma4500: use generic txx9 gpio
  [MIPS] generic txx9 gpio support
  [MIPS] make fallback gpio.h gpiolib-friendly
  [MIPS] unexport null_perf_irq() and make it static
  [MIPS] unexport rtc_mips_set_time()
  [MIPS] unexport copy_from_user_page()
  ...
2008-04-28 10:51:43 -07:00
Linus Torvalds
e945e849e1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: video drivers: add facility level
  sparc: tcx.c make tcx_init and tcx_exit static
  sparc: ffb.c make ffb_init and ffb_exit static
  sparc: cg14.c make cg14_init and cg15_exit static
  sparc: bw2.c fix bw2_exit
  sparc64: Fix accidental syscall restart on child return from clone/fork/vfork.
  sparc64: Clean up handling of pt_regs trap type encoding.
  sparc: Remove old style signal frame support.
  sparc64: Kill bogus RT_ALIGNEDSZ macro from signal.c
  sparc: sunzilog.c remove unused argument
  sparc: fix drivers/video/tcx.c warning
  sparc64: Kill unused local ISA bus layer.
  input: Rewrite sparcspkr device probing.
  sparc64: Do not ignore 'pmu' device ranges.
  sparc64: Kill ISA_FLOPPY_WORKS code.
  sparc64: Kill CONFIG_SPARC32_COMPAT
  sparc64: Cleanups and corrections for arch/sparc64/Kconfig
  sparc64: Fix wedged irq regression.
2008-04-28 09:45:57 -07:00
Sergei Shtylyov
6e766458f7 [MIPS] Alchemy: move UART platform code to its proper place
Move the code registering the Alchemy UART platform devices from
drivers/serial/ to its proper place, into the Alchemy platform code.  Fix
the related Kconfig entry, while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:28 +01:00
Michael Trimarchi
6e10efefaa atmel_serial: remove duplicated macro definition
After commit 39d4c922b5 (atmel_serial: fix
uart/console concurrent access) the UART_GET_TCR macro got redefined. This
patch removes the duplicated definition.

Signed-off-by: michael trimarchi <trimarchimichael@evidence.eu.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:30 -07:00
Julia Lawall
d1ec61e668 serial: use time_before, time_before_eq, etc
The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:30 -07:00
Alex Williamson
01c194d927 serial 8250: tighten test for using backup timer
Thomas Koeller had reported an issue where a device that had been making use
of the UART_BUG_TXEN code in the 8250 driver was mistakenly being caught by
the backup timer test, causing the device to work improperly.

To fix this, tighten the test requirements to enable the backup timer
workaround.

The backup timer is really meant to catch UARTs that don't re-assert the THRE
interrupt.  The expectation is that they do initially assert THRE.  This patch
clarifies the test.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: Thomas Koeller <thomas@koeller.dyndns.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:30 -07:00
Yoichi Yuasa
baac58955d serial: add vr41xx_siu_early_setup() for serial console
Add vr41xx_siu_early_setup() for serial console.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:30 -07:00
Alan Cox
eb424fd21c uart_get_baud_rate: stop mangling termios
Russell King noticed this one: We have to avoid replacing B0 when we pick a
baud rate for a "hung up" port.  Ugly but the proper fix is in the tty layer
and means changing the tty<->serial interfaces so we will defer that for now.

[akpm@linux-foundation.org: fix uninitialised var]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:30 -07:00
Alan Cox
e991a2bd4f Fix tty speed handling on 8250
We try and write the correct speed back but the serial midlayer already
mangles the speed on us and that means if we request B0 we report back B9600
when we should not.  For now we'll hack around this in the drivers and serial
code, pending a better long term solution.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:29 -07:00
Sam Ravnborg
7a63ce5a1f serial: silence section mismatch warnings in 8250_pci
Fix following warnings:
WARNING: drivers/serial/built-in.o(.data+0x5b8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_ite887x_exit()
WARNING: drivers/serial/built-in.o(.data+0x5e0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
WARNING: drivers/serial/built-in.o(.data+0x608): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
WARNING: drivers/serial/built-in.o(.data+0x658): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
WARNING: drivers/serial/built-in.o(.data+0x680): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
WARNING: drivers/serial/built-in.o(.data+0x6a8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:pci_plx9050_exit()
WARNING: drivers/serial/built-in.o(.data+0x6d0): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
WARNING: drivers/serial/built-in.o(.data+0x6f8): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
WARNING: drivers/serial/built-in.o(.data+0x720): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()
WARNING: drivers/serial/built-in.o(.data+0x748): Section mismatch in reference from the variable pci_serial_quirks to the function .devexit.text:sbs_exit()

pci_serial_quirks contains a number of function pointers where the referenced
function is annotated __devexit.  This is OK so we annotate pci_serial_quirks
with __refdata to ignore the __devexit references

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:29 -07:00
Alan Cox
032c17e8af crisv10: prepare for BKL push down
Just the modem bits this time

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:28 -07:00
Roel Kluin
1ecf0d0cd2 dz: test after postfix decrement fails in dz_console_putchar()
When loops reaches 0 the postfix decrement still subtracts, so the subsequent
test fails.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:16 -07:00
Robert Reif
3ade11601f sparc: sunzilog.c remove unused argument
Remove unused argument in function call.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-26 23:10:19 -07:00
Linus Torvalds
b9fa38f75e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (49 commits)
  [POWERPC] Add zImage.iseries to arch/powerpc/boot/.gitignore
  [POWERPC] bootwrapper: fix build error on virtex405-head.S
  [POWERPC] 4xx: Fix 460GT support to not enable FPU
  [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts
  [POWERPC] Xilinx: of_serial support for Xilinx uart 16550.
  [POWERPC] Xilinx: boot support for Xilinx uart 16550.
  [POWERPC] celleb: Add support for PCI Express
  [POWERPC] celleb: Move miscellaneous files for Beat
  [POWERPC] celleb: Move a file for SPU on Beat
  [POWERPC] celleb: Move files for Beat mmu and iommu
  [POWERPC] celleb: Move files for Beat hvcall interfaces
  [POWERPC] celleb: Move the SCC related code for celleb
  [POWERPC] celleb: Move the files for celleb base support
  [POWERPC] celleb: Consolidate io-workarounds code
  [POWERPC] cell: Generalize io-workarounds code
  [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries
  [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/
  [POWERPC] Register udbg console early on pseries LPAR
  [POWERPC] Mark udbg console as CON_ANYTIME, ie. callable early in boot
  [POWERPC] Set udbg_console index to 0
  ...
2008-04-25 12:52:16 -07:00
John Linn
b912b5e2cf [POWERPC] Xilinx: of_serial support for Xilinx uart 16550.
The Xilinx 16550 uart core is not a standard 16550 because it uses
word-based addressing rather than byte-based addressing. With
additional properties it is compatible with the open firmware
'ns16550' compatible binding.

This code updates the of_serial driver to handle the reg-offset
and reg-shift properties to enable this core to be used.

Signed-off-by: John Linn <john.linn@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-24 13:32:46 -05:00
Linus Torvalds
346ad4b7fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (85 commits)
  Blackfin char driver for Blackfin on-chip OTP memory (v3)
  Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer.
  Blackfin Serial Driver: the uart break anomaly has been given its own number, so switch to it
  Blackfin Serial Driver: use BFIN_UART_NR_PORTS to help SIR driver in uart port.
  Blackfin Serial Driver: Fix bug - kernel hangs when accessing uart 0 on bf537 when booting u-boot and linux on uart 1
  Blackfin Serial Driver: punt unused lsr variable
  Blackfin Serial Driver: Enable IR function when user application (irattach /dev/ttyBFx -s) call TIOCSETD ioctl with line discipline N_IRDA
  [Blackfin] arch: add include/boot .gitignore files
  [Blackfin] arch: Functional power management support: Add support for cpu frequency scaling
  [Blackfin] arch: Functional power management support: Remove broken cpu frequency scaling drivers
  [Blackfin] arch: Equalize include files: Add PLL_DIV Masks
  [Blackfin] arch: Add a warning about the value of CLKIN.
  [Blackfin] arch: take DDR DEVWD into consideration as well for BF548
  [Blackfin] arch: Remove the circular buffering mechanism for exceptions
  [Blackfin] arch: lose unnecessary dependency on CONFIG_BFIN_ICACHE for MPU
  [Blackfin] arch: fix bug - before assign new channel to the map register, need clear the bits first.
  [Blackfin] arch: add Blackfin on-chip SIR IrDA driver support
  [Blackfin] arch: BF54x memsizes are in mbits, not mbytes
  [Blackfin] arch: try to remove condition that causes double fault, by checking current before it gets dereferenced
  [Blackfin] arch: Update anomaly list.
  ...
2008-04-24 09:33:34 -07:00
Sonic Zhang
0a27842337 Blackfin Serial Driver: fix bug - use mod_timer to replace only add_timer.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=4045
If adding timer in both timer handler and rx interrupt, a timer may be
added when it is till in the pending list.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 04:36:47 +08:00
Mike Frysinger
50e2e15afa Blackfin Serial Driver: the uart break anomaly has been given its own number, so switch to it
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 03:03:03 +08:00
Graf Yang
2ade972996 Blackfin Serial Driver: use BFIN_UART_NR_PORTS to help SIR driver in uart port.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 02:55:49 +08:00
Robert Reif
227739bf4c sparc: sunzilog uart order
I have a sparcstation 20 clone with a lot of on board serial ports.
The serial core code assumes that uarts are assigned contiguously
and that may not be the case when there are multiple zs devices
present.  This patch insures that uart chips are placed in front of
keyboard/mouse chips in the port table.

ffd37420: ttyS0 at MMIO 0xf1100000 (irq = 44) is a zs (ESCC)
Console: ttyS0 (SunZilog zs0)
console [ttyS0] enabled
ffd37420: ttyS1 at MMIO 0xf1100004 (irq = 44) is a zs (ESCC)
ffd37500: Keyboard at MMIO 0xf1000000 (irq = 44) is a zs
ffd37500: Mouse at MMIO 0xf1000004 (irq = 44) is a zs
ffd3c5c0: ttyS2 at MMIO 0xf1100008 (irq = 44) is a zs (ESCC)
ffd3c5c0: ttyS3 at MMIO 0xf110000c (irq = 44) is a zs (ESCC)
ffd3c6a0: ttyS4 at MMIO 0xf1100010 (irq = 44) is a zs (ESCC)
ffd3c6a0: ttyS5 at MMIO 0xf1100014 (irq = 44) is a zs (ESCC)
ffd3c780: ttyS6 at MMIO 0xf1100018 (irq = 44) is a zs (ESCC)
ffd3c780: ttyS7 at MMIO 0xf110001c (irq = 44) is a zs (ESCC)

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 03:37:51 -07:00
Sonic Zhang
1a3a4c7130 Blackfin Serial Driver: Fix bug - kernel hangs when accessing uart 0 on bf537 when booting u-boot and linux on uart 1
Wait only when this UART is enabled.
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3995

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 09:43:20 +08:00
Mike Frysinger
0c44a86d9e Blackfin Serial Driver: punt unused lsr variable
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 04:56:02 +08:00
Linus Torvalds
9a64388d83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
  [POWERPC] Fix compile breakage for 64-bit UP configs
  [POWERPC] Define copy_siginfo_from_user32
  [POWERPC] Add compat handler for PTRACE_GETSIGINFO
  [POWERPC] i2c: Fix build breakage introduced by OF helpers
  [POWERPC] Optimize fls64() on 64-bit processors
  [POWERPC] irqtrace support for 64-bit powerpc
  [POWERPC] Stacktrace support for lockdep
  [POWERPC] Move stackframe definitions to common header
  [POWERPC] Fix device-tree locking vs. interrupts
  [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
  [POWERPC] Remove unused __max_memory variable
  [POWERPC] Simplify xics direct/lpar irq_host setup
  [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
  [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
  [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
  [POWERPC] Use asm-generic/bitops/find.h in bitops.h
  [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
  [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
  [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
  [POWERPC] 86xx: mark functions static, other minor cleanups
  ...
2008-04-21 15:50:49 -07:00