Commit Graph

332 Commits

Author SHA1 Message Date
Andres Salomon
01dee1881d kbuild: fix help output to show correct arch
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 22:46:11 +02:00
Segher Boessenkool
5dffbe811b kbuild: show defconfig subdirs in make help
PowerPC will start moving board defconfigs into subarch-specific
subdirs soon.  "make help" currently does not look in subdirs to
find the defconfigs to show.  This is partially a good thing,
since there are way too many defconfigs for one list.

This patch makes the main "make help" display something like

  help-40x         - Show 40x-specific targets
  help-44x         - Show 44x-specific targets
  help-boards      - Show all of the above

and wires up stuff so those new help-* commands actually work.

[sam: fixed it up to display x86 defconfigs too]
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-28 22:40:14 +02:00
Uwe Kleine-König
0254da07d9 kbuild: fix depmod comment
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: trivial@kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:49:40 +02:00
Andi Kleen
35bb5b1e0e Add option to enable -Wframe-larger-than= on gcc 4.4
Add option to enable -Wframe-larger-than= on gcc 4.4

gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=...
option to warn at build time about too large stack frames. Add a config
option to enable this warning, since this very useful for the kernel.

I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit
and 1024 as default for 32bit architectures.  With some research and
fixing all the code for smaller values these defaults should be probably
lowered.

With the default allyesconfigs have some new warnings, but I think
that is all code that should be just fixed.

At some point (when gcc 4.4 is released and widely used) this should
obsolete make checkstack

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:23:47 +02:00
Alexey Dobriyan
80ff262416 kbuild: add kconfig symbols to tags output
Steps to reproduce:

	vi -t NETFILTER

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-04-25 20:20:42 +02:00
Sebastian Siewior
f764e51421 Remove -numa from EXTRAVERSION
This snuck in through 919ee677b6
("[SPARC64]: Add NUMA support")

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24 12:38:04 -07:00
David S. Miller
919ee677b6 [SPARC64]: Add NUMA support.
Currently there is only code to parse NUMA attributes on
sun4v/niagara systems, but later on we will add such parsing
for older systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-23 23:32:17 -07:00
Uwe Kleine-Knig
bc3c26fe65 fix typo "is" -> "if" in Makefile
It should be "if" but is written as "is"..

Signed-off-by: Uwe Kleine-Koenig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
2008-04-21 22:53:56 +00:00
Linus Torvalds
4b119e21d0 Linux 2.6.25 2008-04-16 19:49:44 -07:00
Linus Torvalds
120dd64cac Linux 2.6.25-rc9 2008-04-11 13:32:29 -07:00
Linus Torvalds
0e81a8ae37 Linux 2.6.25-rc8 2008-04-01 12:44:26 -07:00
Linus Torvalds
05dda977f2 Linux 2.6.25-rc7 2008-03-25 18:38:14 -07:00
Sam Ravnborg
4ce6efed48 kbuild: soften modpost checks when doing cross builds
The module alias support in the kernel have a consistency
check where it is checked that the size of a structure
in the kernel and on the build host are the same.
For cross builds this check does not make sense so detect
when we do cross builds and silently skip the check in these
situations.
This fixes a build bug for a wireless driver when cross building
for arm.

Acked-by: Michael Buesch <mb@bu3sch.de>
Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@kernel.org
2008-03-23 21:38:54 +01:00
Linus Torvalds
a978b30af3 Linux 2.6.25-rc6 2008-03-16 16:32:14 -07:00
Linus Torvalds
cdeeeae056 Linux 2.6.25-rc5 2008-03-09 22:22:27 -07:00
Linus Torvalds
29e8c3c304 Linux 2.6.25-rc4 2008-03-04 20:33:54 -08:00
Linus Torvalds
bfa274e243 Linux 2.6.25-rc3 2008-02-24 13:25:54 -08:00
Linus Torvalds
230b548c15 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: explain why DEBUG_SECTION_MISMATCH is UNDEFINED
  kbuild: fix building vmlinux.o
  kbuild: allow -fstack-protector to take effect
  kconfig: fix select in combination with default
2008-02-18 15:41:05 -08:00
Linus Torvalds
101142c37b Linux 2.6.25-rc2 2008-02-15 12:57:20 -08:00
Sam Ravnborg
cf87dcd140 kbuild: fix building vmlinux.o
Ingo Molnar wrote:
>
> i've got a build log from a weird build error below:
>
>   LD      init/built-in.o
> distcc[12023] ERROR: compile (null) on localhost failed
> make: *** [vmlinux.o] Error 1
> make: *** Waiting for unfinished jobs....
>   LD      .tmp_vmlinux1
>

Building vmlinux.o were moved up in the dependency chain so we started
to build it before the kallsym stuff. This was done to let modpost
report section mismatch bugs even when the final link failed.

Originally I had expected the dependency of $(kallsyms.o) to
cover this but it turns out that we need to be even more explicit.
Fix this by adding a conditional dependency on firat target
used in the kallsyms serie of builds.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
2008-02-14 23:33:25 +01:00
Sam Ravnborg
e06b8b98da kbuild: allow -fstack-protector to take effect
Arjan van de Ven <arjan@infradead.org> wrote:
===
I just read the excellent LWN writeup of the vmsplice
security thing, and that got me wondering why this attack
wasn't stopped by the CONFIG_CC_STACKPROTECTOR option...
because it plain should have been...

Some analysis later.. it turns out that the following line
in the top level Makefile, added by you in October 2007,
entirely disables CONFIG_CC_STACKPROTECTOR ;(
With this line removed the exploit will be nicely stopped.

CFLAGS          += $(call cc-option, -fno-stack-protector)

Now I realize that certain distros have patched gcc to
compensate for their lack of distro wide CFLAGS, and it's
great to work around that... but would there be a way to NOT
disable this for CONFIG_CC_STACKPROTECTOR please?
It would have made this exploit not possible for those kernels
that enable this feature (and that includes distros like Fedora)
===

Move the assignment to KBUILD_CFLAGS up before including
the arch specific Makefile so arch makefiles may override
the setting.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org
2008-02-14 23:33:21 +01:00
Linus Torvalds
19af35546d Linux 2.6.25-rc1
.. and I really need to call it something else.  Maybe it is time to
bring back the weasel series, since weasels always make me feel good
about a kernel.
2008-02-10 14:18:14 -08:00
Robert P. J. Day
e1b8513d21 Typoes: "whith" -> "with"
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:14:02 +02:00
Sam Ravnborg
310f8243a6 kbuild: link vmlinux.o before kallsyms passes
link vmlinux.o so we may report section mismatch bugs before
we start with the real link - that may error out.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Sam Ravnborg
91341d4b2c kbuild: introduce new option to enhance section mismatch analysis
Setting the option DEBUG_SECTION_MISMATCH will
report additional section mismatch'es but this
should in the end makes it possible to get rid of
all of them.

See help text in lib/Kconfig.debug for details.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:21:18 +01:00
Valdis.Kletnieks@vt.edu
243f40cecb kbuild: document 'make prepare' in 'make help'
The output of 'make help' covers a lot of options, but doesn't include
a listing for 'make prepare'.  Here's a one-liner to fix that...

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Uwe Kleine-König
2c81210a26 kbuild: ignore cache modifiers for generating the tags files
With this patch I'm able to find the definition of _xmit_lock defined in
include/linux/netdevice.h as follows:

	struct net_device {
		...
		spinlock_t _xmit_lock ____cacheline_aligned_in_smp;
	}

Otherwise this counts as definition of ____cacheline_aligned_in_smp.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:38 +01:00
Robert P. J. Day
899c38420c Kbuild: Clarify the rpm-related make packaging targets
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:36 +01:00
Tejun Heo
551559e13a kbuild: implement modules.order
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Geert Uytterhoeven
8000743455 kbuild: Add missing srctree prefix for includecheck and versioncheck
Add missing $(srctree)/ prefix for scripts used by the includecheck and
versioncheck make targets

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Sam Ravnborg
aa025e7d5c kbuild: document versioncheck in make help
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Randy Dunlap
ec2d987f98 kbuild: add 'includecheck' help text
Add 'includecheck' to the Static analyzers help list.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00
Paul Mundt
12760cb4df sh: Fix up uname -m matching for native sh64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:56 +09:00
Linus Torvalds
49914084e7 Linux 2.6.24 2008-01-24 14:58:37 -08:00
Linus Nilsson
d384e35a25 Makefile: Change typoed 'behavour' to 'behaviour'
Change two occurances of "behavour" to "behaviour".

Signed-off-by: Linus Nilsson <lajnold@acc.umu.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-21 19:55:04 -08:00
Linus Torvalds
cbd9c88369 Linux 2.6.24-rc8 2008-01-15 20:22:48 -08:00
Linus Torvalds
3ce5445046 Linux 2.6.24-rc7 2008-01-06 13:45:38 -08:00
Linus Torvalds
ea67db4cdb Linux 2.6.24-rc6 2007-12-20 17:25:48 -08:00
Linus Torvalds
82d29bf6dc Linux 2.6.24-rc5 2007-12-10 19:48:43 -08:00
Sam Ravnborg
18c32dac75 kbuild: fix building with O=.. options
The check introduced in commit:
4f1127e204 "kbuild: fix
infinite make recursion"

caused certain external modules not to build and
also caused 'make targz-pkg' to fail.
This is a minimal fix so we revert to previous
behaviour - but we do not overwrite the Makefile
in the top-level directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Jay Cliburn <jacliburn@bellsouth.net>
Cc: Jay Cliburn <jacliburn@bellsouth.net>
2007-12-09 08:55:13 +01:00
Sam Ravnborg
1cacc9ab8b kbuild: fix building with redirected output.
Jan Altenberg <jan.altenberg@linutronix.de> reported that
building with redirected input like this failed:
make O=dir oldconfig bzImage < /dev/null

The problem were caused by a make silentoldconfig being
run before oldconfig and with a non-recent .config the build
failed because silentoldconfig requires non-redirected stdin.

Silentoldconfig was run as a side-effect of having the
top-level Makefile re-made by make.
Introducing an empty rule for the top-level Makefile
(and Kbuild.include) fixed the issue.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-12-09 08:43:42 +01:00
Linus Torvalds
09b56adc98 Linux 2.6.24-rc4 2007-12-03 20:26:10 -08:00
Sam Ravnborg
80ef88d6d2 x86: simplify "make ARCH=x86" and fix kconfig all.config
Simplify "make ARCH=x86" and fix kconfig so we again
can set 64BIT in all.config.

For a fix the diffstat is nice:
 6 files changed, 3 insertions(+), 36 deletions(-)

The patch reverts these commits:
0f855aa64b
-> kconfig: add helper to set config symbol from environment variable

2a113281f5
-> kconfig: use $K64BIT to set 64BIT with all*config targets

Roman Zippel pointed out that kconfig supported string
compares so the additional complexity introduced by the
above two patches were not needed.

With this patch we have following behaviour:

# make {allno,allyes,allmod,rand}config [ARCH=...]
option \ host arch      | 32bit         | 64bit
=====================================================
./.                     | 32bit         | 64bit
ARCH=x86                | 32bit         | 32bit
ARCH=i386               | 32bit         | 32bit
ARCH=x86_64             | 64bit         | 64bit

The general rule are that ARCH= and native architecture
takes precedence over the configuration.
So make ARCH=i386 [whatever] will always build a 32-bit
kernel no matter what the configuration says.
The configuration will be updated to 32-bit if it was
configured to 64-bit and the other way around.

This behaviour is consistent with previous behaviour so
no suprises here.

make ARCH=x86 will per default result in a 32-bit kernel
but as the only ARCH= value x86 allow the user to select
between 32-bit and 64-bit using menuconfig. 

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Herrmann <aherrman@arcor.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-17 17:21:54 +01:00
Thomas Gleixner
d0974b11e0 Remove x86 merge artifact from top Makefile
The x86 merge modified the tags target to handle the two separate
source directories. Remove it now that i386/x86_64 are gone completely.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17 16:27:01 +01:00
Linus Torvalds
d9f8bcbf67 Linux 2.6.24-rc3 2007-11-16 21:16:36 -08:00
Sam Ravnborg
daa93fab82 x86: enable "make ARCH=x86"
After unification of the Kconfig files and
introducing K64BIT support in kconfig
it required only trivial changes to enable
"make ARCH=x86".

With this patch you can build for x86_64 in several ways:
1) make ARCH=x86_64
2) make ARCH=x86 K64BIT=y
3) make ARCH=x86 menuconfig
   => select 64-bit

Likewise for i386 with the addition that
i386 is default is you say ARCH=x86.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Sam Ravnborg
d746d647f3 x86: do not use $(ARCH) when not needed
For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12 21:02:20 +01:00
Linus Torvalds
dbeeb816e8 Linux 2.6.24-rc2 2007-11-06 13:57:46 -08:00
Sam Ravnborg
69ee0b3522 kbuild: do not pick up CFLAGS from the environment
Too many people have CFLAGS set to support building userspace.
And now Kbuild picks up CFLAGS this caused troubles.

Although people should realise that setting CFLAGS has
a 'global' effect the impact on the kernel build is a suprise.
So change kbuild to pick up value from KCFLAGS that is
much less used.

When kbuild pick up a value it will warn like this:
Makefile:544: "WARNING: Appending $KCFLAGS (-O3) from environment to kernel $CFLAGS"

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bächler <thomas@archlinux.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
2007-11-04 19:00:46 +01:00
Paul Mundt
236b195744 sh: Correct SUBARCH matching.
When configuring the kernel natively the uname matching is off,
so fix up the uname mangling to get the proper SUBARCH. Needs
an explicit range so that SH-5 doesn't break.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-02 12:22:47 +09:00