Commit Graph

53 Commits

Author SHA1 Message Date
Dan Williams
7e55a70c5b ioat: fix infinite timeout checking in ioat2_quiesce
Fix typo in ioat2_quiesce. check 'tmo' is zero, not 'end'.  Also applies
to 2.6.32.3

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02 22:57:34 -07:00
Dan Williams
a6d52d7067 ioat2,3: put channel hardware in known state at init
Put the ioat2 and ioat3 state machines in the halted state with all
errors cleared.

The ioat1 init path is not disturbed for stability, there are no
reported ioat1 initiaization issues.

Cc: <stable@kernel.org>
Reported-by: Roland Dreier <rdreier@cisco.com>
Tested-by: Roland Dreier <rdreier@cisco.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-19 15:36:02 -07:00
Dan Williams
cd78809f61 ioat3: fix p-disabled q-continuation
When continuing a pq calculation the driver needs 3 extra sources.  The
driver can perform a 3 source calculation with a single descriptor, but
needs an extended descriptor to process up to 8 sources in one
operation.  However, in the p-disabled case only one extra source is
needed.  When continuing a p-disabled operation there are occasions
(i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an
extended descriptor.  Properly account for this fact otherwise invalid
'dmacount' values will be written to hardware usually causing the
channel to halt with 'invalid descriptor' errors.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-17 13:52:39 -07:00
Dan Williams
49954c1567 ioat3: fix pq completion versus channel deallocation race
The completion of a pq operation is notified with a null descriptor
appended to the end of the chain.  This descriptor needs to be visible
to dma clients otherwise the client is precluded from ensuring all
operations are quiesced before freeing channel resources, i.e. due to
descriptor polling it may get the completion notification ahead of the
interrupt delivered by the null descriptor.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
7b3cc2b1fc async_tx: build-time toggling of async_{syndrome,xor}_val dma support
ioat3.2 does not support asynchronous error notifications which makes
the driver experience latencies when non-zero pq validate results are
expected.  Provide a mechanism for turning off async_xor_val and
async_syndrome_val via Kconfig.  This approach is generally useful for
any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like
to force the async_tx api to fall back to the synchronous path for
certain operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
b57014def9 ioat2,3: report all uncorrectable errors
Modify is_ioat_bug() to catch all errors that are uncorrectable, or not
currently handled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
de581b65f6 ioat3: specify valid address for disabled-Q or disabled-P
Although disabled, hardware still checks address validity, so duplicate
the known address.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:08:45 -07:00
Dan Williams
6f82b83b7a ioat2,3: disable asynchronous error notifications
Error interrupts and error completions may cause channel hangs, so
poll the channel status register after a timeout.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:07:57 -07:00
Dan Williams
228c4f5cfb ioat3: dca and raid operations are incompatible
RAID operations cause a system hang on platforms with DCA
(Direct-Cache-Access) enabled.  So turn off RAID capabilities in this
case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:07:10 -07:00
Dan Williams
e22dde9904 ioat: silence "dca disabled" messages
Turning off dca is not an "error", and the dca-enabled state can be
viewed from sysfs.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-17 11:34:31 -07:00
Dan Williams
cdef57dbb6 ioat3: fix uninitialized var warnings
drivers/dma/ioat/dma_v3.c: In function 'ioat3_prep_memset_lock':
drivers/dma/ioat/dma_v3.c:439: warning: 'fill' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:437: warning: 'desc' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c: In function '__ioat3_prep_xor_lock':
drivers/dma/ioat/dma_v3.c:489: warning: 'xor' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:486: warning: 'desc' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c: In function '__ioat3_prep_pq_lock':
drivers/dma/ioat/dma_v3.c:631: warning: 'pq' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:628: warning: 'desc' may be used uninitialized in this function

gcc-4.0, unlike gcc-4.3, does not see that these variables are
initialized before use.  Convert the descriptor loops to do-while make
this initialization apparent.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-21 09:22:29 -07:00
Andrew Morton
f477f5b331 drivers/dma/ioat/dma_v2.c: fix warnings
drivers/dma/ioat/dma_v2.c: In function 'ioat2_dma_prep_memcpy_lock':
drivers/dma/ioat/dma_v2.c:680: warning: 'hw' may be used uninitialized in this function
drivers/dma/ioat/dma_v2.c:681: warning: 'desc' may be used uninitialized in this function

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-21 09:17:58 -07:00
Dan Williams
376ec37667 ioat2: clarify ring size limits
With the addition of ioat_max_alloc_order it is not clear what the
maximum allocation order is, so document that in the modinfo.  Also take
an opportunity to kill a stray semicolon.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-16 15:16:50 -07:00
Dan Williams
3208ca52f3 ioat: driver version 4.0
A new ring implementation and the addition of raid functionality
constitutes a bump in the driver major version number.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-10 11:27:36 -07:00
Maciej Sosnowski
1a5aeeecd5 dca: registering requesters in multiple dca domains
This patch enables DCA support on multiple-IOH/multiple-IIO architectures.
It modifies dca module by replacing single dca_providers list
with dca_domains list, each domain containing separate list of providers.
This approach lets dca driver manage multiple domains, i.e. sets of providers
and requesters mapped back to the same PCI root complex device.
The driver takes care to register each requester to a provider
from the same domain.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
2009-09-10 10:00:05 -07:00
Dan Williams
bbb20089a3 Merge branch 'dmaengine' into async-tx-next
Conflicts:
	crypto/async_tx/async_xor.c
	drivers/dma/ioat/dma_v2.h
	drivers/dma/ioat/pci.c
	drivers/md/raid5.c
2009-09-08 17:55:21 -07:00
Dan Williams
162b96e63e ioat2,3: cacheline align software descriptor allocations
All the necessary fields for handling an ioat2,3 ring entry can fit into
one cacheline.  Move ->len prior to ->txd in struct ioat_ring_ent, and
move allocation of these entries to a hw-cache-aligned kmem cache to
reduce the number of cachelines dirtied for descriptor management.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:53:04 -07:00
Dan Williams
ea25968a32 ioat: implement a private tx_list
Drop ioatdma's use of tx_list from struct dma_async_tx_descriptor in
preparation for removal of this field.

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:53:02 -07:00
Roland Dreier
a6417dd58d I/OAT: Convert to PCI_VDEVICE()
Trivial cleanup to make the PCI ID table easier to read.

[dan.j.williams@intel.com: extended to v3.2 devices]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:03 -07:00
Roland Dreier
6506cbca6b Add MODULE_DEVICE_TABLE() so ioatdma module is autoloaded
The ioatdma module is missing aliases for the PCI devices it supports,
so it is not autoloaded on boot.  Add a MODULE_DEVICE_TABLE() to get
these aliases.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:03 -07:00
Dan Williams
e3232714d4 ioat3: segregate raid engines
The cleanup routine for the raid cases imposes extra checks for handling
raid descriptors and extended descriptors.  If the channel does not
support raid it can avoid this extra overhead by using the ioat2 cleanup
path.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:02 -07:00
Tom Picard
b265b11fc1 ioat3: ioat3.2 pci ids for Jasper Forest
Jasper Forest introduces raid offload support via ioat3.2 support.  When
raid offload is enabled two (out of 8 channels) will report raid5/raid6
offload capabilities.  The remaining channels will only report ioat3.0
capabilities (memcpy).

Signed-off-by: Tom Picard <tom.s.picard@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:01 -07:00
Dan Williams
58c8649e0e ioat3: interrupt descriptor support
The async_tx api uses the DMA_INTERRUPT operation type to terminate a
chain of issued operations with a callback routine.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:00 -07:00
Dan Williams
ae786624c2 ioat3: support xor via pq descriptors
If a platform advertises pq capabilities, but not xor, then use
ioat3_prep_pqxor and ioat3_prep_pqxor_val to simulate xor support.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:00 -07:00
Dan Williams
d69d235b7d ioat3: pq support
ioat3.2 adds support for raid6 syndrome generation (xor sum of galois
field multiplication products) using up to 8 sources.  It can also
perform an pq-zero-sum operation to validate whether the syndrome for a
given set of sources matches a previously computed syndrome.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:59 -07:00
Dan Williams
9de6fc717b ioat3: xor self test
This adds a hardware specific self test to be called from ioat_probe.
In the ioat3 case we will have tests for all the different raid
operations, while ioat1 and ioat2 will continue to just test memcpy.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:58 -07:00
Dan Williams
b094ad3be5 ioat3: xor support
ioat3.2 adds xor offload support for up to 8 sources.  It can also
perform an xor-zero-sum operation to validate whether all given sources
sum to zero, without writing to a destination.  Xor descriptors differ
from memcpy in that one operation may require multiple descriptors
depending on the number of sources.  When the number of sources exceeds
5 an extended descriptor is needed.  These descriptors need to be
accounted for when updating the DMA_COUNT register.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:57 -07:00
Dan Williams
e61dacaeb3 ioat3: enable dca for completion writes
Tag completion writes for direct cache access to reduce the latency of
checking for descriptor completions.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:57 -07:00
Dan Williams
5669e31c5a ioat: add 'ioat' sysfs attributes
Export driver attributes for diagnostic purposes:
'ring_size': total number of descriptors available to the engine
'ring_active': number of descriptors in-flight
'capabilities': supported operation types for this channel
'version': Intel(R) QuickData specfication revision

This also allows some chattiness to be removed from the driver startup
as this information is now available via sysfs.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:56 -07:00
Dan Williams
bf40a6869c ioat3: split ioat3 support to its own file, add memset
Up until this point the driver for Intel(R) QuickData Technology
engines, specification versions 2 and 3, were mostly identical save for
a few quirks.  Version 3.2 hardware adds many new capabilities (like
raid offload support) requiring some infrastructure that is not relevant
for v2.  For better code organization of the new funcionality move v3
and v3.2 support to its own file dma_v3.c, and export some routines from
the base files (dma.c and dma_v2.c) that can be reused directly.

The first new capability included in this code reorganization is support
for v3.2 memset operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:55 -07:00
Dan Williams
2aec048cdc ioat3: hardware version 3.2 register / descriptor definitions
ioat3.2 adds raid5 and raid6 offload capabilities.

Signed-off-by: Tom Picard <tom.s.picard@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:54 -07:00
Dan Williams
128f2d567f ioat2+: add fence support
In preparation for adding more operation types to the ioat3 path the
driver needs to honor the DMA_PREP_FENCE flag.  For example the async_tx api
will hand xor->memcpy->xor chains to the driver with the 'fence' flag set on
the first xor and the memcpy operation.  This flag in turn sets the 'fence'
flag in the descriptor control field telling the hardware that future
descriptors in the chain depend on the result of the current descriptor, so
wait for all writes to complete before starting the next operation.

Note that ioat1 does not prefetch the descriptor chain, so does not
require/support fenced operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:53 -07:00
Dan Williams
a309218ace ioat2,3: dynamically resize descriptor ring
Increment the allocation order of the descriptor ring every time we run
out of descriptors up to a maximum of allocation order specified by the
module parameter 'ioat_max_alloc_order'.  After each idle period
decrement the allocation order to a minimum order of
'ioat_ring_alloc_order' (i.e. the default ring size, tunable as a module
parameter).

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:38:54 -07:00
Dan Williams
09c8a5b85e ioat: switch watchdog and reset handler from workqueue to timer
In order to support dynamic resizing of the descriptor ring or polling
for a descriptor in the presence of a hung channel the reset handler
needs to make progress while in a non-preemptible context.  The current
workqueue implementation precludes polling channel reset completion
under spin_lock().

This conversion also allows us to return to opportunistic cleanup in the
ioat2 case as the timer implementation guarantees at least one cleanup
after every descriptor is submitted.  This means the worst case
completion latency becomes the timer frequency (for exceptional
circumstances), but with the benefit of avoiding busy waiting when the
lock is contended.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
ad643f54c8 ioat1: trim ioat_dma_desc_sw
Save 4 bytes per software descriptor by transmitting tx_cnt in an unused
portion of the hardware descriptor.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
345d852391 ioat: ___devinit annotate the initialization paths
Mark all single use initialization routines with __devinit.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
f6ab95b557 ioat: preserve chanctrl bits when re-arming interrupts
The register write in ioat_dma_cleanup_tasklet is unfortunate in two
ways:
1/ It clears the extra 'enable' bits that we set at alloc_chan_resources time
2/ It gives the impression that it disables interrupts when it is in
   fact re-arming interrupts

[ Impact: fix, persist the value of the chanctrl register when re-arming ]

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
bb32078630 ioat: ignore reserved bits for chancnt and xfercap
Don't trust that the reserved bits are always zero, also sanity check
the returned value.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
4fb9b9e8d5 ioat: cleanup completion status reads
The cleanup path makes an effort to only perform an atomic read of the
64-bit completion address.  However in the 32-bit case it does not
matter if we read the upper-32 and lower-32 non-atomically because the
upper-32 will always be zero.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:24 -07:00
Dan Williams
6df9183a15 ioat: add some dev_dbg() calls
Provide some output for debugging the driver.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:23 -07:00
Dan Williams
38e12f64a1 ioat1: kill unused unmap parameters
The unified ioat1/ioat2 ioat_dma_unmap() implementation derives the
source and dest addresses from the unmap descriptor.  There is no longer
a need to track this information in struct ioat_desc_sw.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:30:23 -07:00
Dan Williams
5cbafa65b9 ioat2,3: convert to a true ring buffer
Replace the current linked list munged into a ring with a native ring
buffer implementation.  The benefit of this approach is reduced overhead
as many parameters can be derived from ring position with simple pointer
comparisons and descriptor allocation/freeing becomes just a
manipulation of head/tail pointers.

It requires a contiguous allocation for the software descriptor
information.

Since this arrangement is significantly different from the ioat1 chain,
move ioat2,3 support into its own file and header.  Common routines are
exported from driver/dma/ioat/dma.[ch].

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:55 -07:00
Dan Williams
dcbc853af6 ioat: prepare the code for ioat[12]_dma_chan split
Prepare the code for the conversion of the ioat2 linked-list-ring into a
native ring buffer.  After this conversion ioat2 channels will share
less of the ioat1 infrastructure, but there will still be places where
sharing is possible.  struct ioat_chan_common is created to house the
channel attributes that will remain common between ioat1 and ioat2
channels.

For every routine that accesses both common and hardware specific fields
the old unified 'ioat_chan' pointer is split into an 'ioat' and  'chan'
pointer.  Where 'chan' references common fields and 'ioat' the
hardware/version specific.

[ Impact: pure structure member movement/variable renames, no logic changes ]

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:55 -07:00
Dan Williams
a6a39ca1ba ioat: fix self test interrupts
If a callback is to be attached to a descriptor the channel needs to
know at ->prep time so it can set the interrupt enable bit.  This is in
preparation for moving descriptor ioat2 descriptor preparation from
->submit to ->prep.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:55 -07:00
Dan Williams
a0587bcf3e ioat1: move descriptor allocation from submit to prep
The async_tx api assumes that after a successful ->prep a subsequent
->submit will not fail due to a lack of resources.

This also fixes a bug in the allocation failure case.  Previously the
descriptors allocated prior to the allocation failure would not be
returned to the free list.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:55 -07:00
Dan Williams
c7984f4e4e ioat: define descriptor control bit-field
This cleans up a mess of and'ing and or'ing bit definitions, and allows
simple assignments from the specified dma_ctrl_flags parameter.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:55 -07:00
Dan Williams
77867fff03 ioat: fix type mismatch for ->dmacount
->dmacount tracks the sequence number of active descriptors.  It is
written to the DMACOUNT register to update the channel's view of pending
descriptors in the chain.  The register is 16-bits so ->dmacount should
be unsigned and 16-bit as well.  Also modify ->desccount to maintain
alignment.

This was never a problem in practice because we never compared dmacount
values, but this is a bug waiting to happen.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:54 -07:00
Dan Williams
f2427e276f ioat: split ioat_dma_probe into core/version-specific routines
Towards the removal of ioatdma_device.version split the initialization
path into distinct versions.  This conversion:
1/ moves version specific probe code to version specific routines
2/ removes the need for ioat_device
3/ turns off the ioat1 msi quirk if the device is reinitialized for intx

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:54 -07:00
Dan Williams
b31b78f1ab ioat: kill function prototype ifdef guards
The only .c files that utilize these protected prototypes depend on
CONFIG_INTEL_IOATDMA=y, so there is no value gained in providing empty
prototypes.

[ Impact: pure cleanup ]

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:54 -07:00
Dan Williams
bc3c702585 ioat: cleanup some long deref chains and 80 column collisions
* reduce device->common. to dma-> in ioat_dma_{probe,remove,selftest}
* ioat_lookup_chan_by_index to ioat_chan_by_index
* multi-line function definitions
* ioat_desc_sw.async_tx to ioat_desc_sw.txd
* desc->txd. to tx-> in cleanup routine

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:29:54 -07:00