Commit Graph

2245 Commits

Author SHA1 Message Date
Linus Torvalds
eda054770e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: clear bridge resource range if BIOS assigned bad one
  PCI: hotplug/cpqphp, fix NULL dereference
  Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
  PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11 14:15:44 -07:00
Jiri Slaby
a7ef7d1f5e PCI: hotplug/cpqphp, fix NULL dereference
There are devices out there which are PCI Hot-plug controllers with
compaq PCI IDs, but are not bridges, hence have pdev->subordinate
NULL. But cpqphp expects the pointer to be non-NULL.

Add a check to the probe function to avoid oopses like:
BUG: unable to handle kernel NULL pointer dereference at 00000050
IP: [<f82e3c41>] cpqhpc_probe+0x951/0x1120 [cpqphp]
*pdpt = 0000000033779001 *pde = 0000000000000000
...

The device here was:
00:0b.0 PCI Hot-plug controller [0804]: Compaq Computer Corporation PCI Hotplug Controller [0e11:a0f7] (rev 11)
	Subsystem: Compaq Computer Corporation Device [0e11:a2f8]

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:10:21 -07:00
Jesse Barnes
3be434f024 Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/"
This reverts commit 75568f8094.

Since they're just a convenience anyway, remove these symlinks since
they're causing duplicate filename errors in the wild.

Acked-by: Alex Chiang <achiang@canonical.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:08:37 -07:00
Bjorn Helgaas
f6d440daeb PCI: change resource collision messages from KERN_ERR to KERN_INFO
We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11 13:08:14 -07:00
Tejun Heo
4daedcfe8c ahci: add pci quirk for JMB362
JMB362 is a new variant of jmicron controller which is similar to
JMB360 but has two SATA ports instead of one.  As there is no PATA
port, single function AHCI mode can be used as in JMB360.  Add pci
quirk for JMB362.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Aries Lee <arieslee@jmicron.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-06-07 16:03:10 -04:00
Linus Torvalds
9a90e09854 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI: Don't let acpi_pad needlessly mark TSC unstable
  drivers/acpi/sleep.h: Checkpatch cleanup
  ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion
  ACPI: delete unused c-state promotion/demotion data strucutures
  ACPI: video: fix acpi_backlight=video
  ACPI: EC: Use kmemdup
  drivers/acpi: use kasprintf
  ACPI, APEI, EINJ injection parameters support
  Add x64 support to debugfs
  ACPI, APEI, Use ERST for persistent storage of MCE
  ACPI, APEI, Error Record Serialization Table (ERST) support
  ACPI, APEI, Generic Hardware Error Source memory error support
  ACPI, APEI, UEFI Common Platform Error Record (CPER) header
  Unified UUID/GUID definition
  ACPI Hardware Error Device (PNP0C33) support
  ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup
  ACPI, APEI, Document for APEI
  ACPI, APEI, EINJ support
  ACPI, APEI, HEST table parsing
  ACPI, APEI, APEI supporting infrastructure
  ...
2010-05-28 14:42:18 -07:00
Linus Torvalds
6109e2ce26 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits)
  PCI: hotplug: pciehp: Removed check for hotplug of display devices
  PCI: read memory ranges out of Broadcom CNB20LE host bridge
  PCI: Allow manual resource allocation for PCI hotplug bridges
  x86/PCI: make ACPI MCFG reserved error messages ACPI specific
  PCI hotplug: Use kmemdup
  PM/PCI: Update PCI power management documentation
  PCI: output FW warning in pci_read/write_vpd
  PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
  PCI quirks: disable msi on AMD rs4xx internal gfx bridges
  PCI: Disable MSI for MCP55 on P5N32-E SLI
  x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs
  PCI: aerdrv: trivial cleanup for aerdrv_core.c
  PCI: aerdrv: trivial cleanup for aerdrv.c
  PCI: aerdrv: introduce default_downstream_reset_link
  PCI: aerdrv: rework find_aer_service
  PCI: aerdrv: remove is_downstream
  PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS
  PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC
  PCI: aerdrv: rework do_recovery
  PCI: aerdrv: rework get_e_source()
  ...
2010-05-21 18:58:52 -07:00
Linus Torvalds
0961d6581c Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
  intel-iommu: Combine the BIOS DMAR table warning messages
  panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I')
  panic: Allow warnings to set different taint flags
  intel-iommu: intel_iommu_map_range failed at very end of address space
  intel-iommu: errors with smaller iommu widths
  intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled
  intel-iommu: use physfn to search drhd for VF
  intel-iommu: Print out iommu seq_id
  intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported
  intel-iommu: Avoid global flushes with caching mode.
  intel-iommu: Use correct domain ID when caching mode is enabled
  intel-iommu mistakenly uses offset_pfn when caching mode is enabled
  intel-iommu: use for_each_set_bit()
  intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
2010-05-21 17:25:01 -07:00
Praveen Kalamegham
ac81860ea0 PCI: hotplug: pciehp: Removed check for hotplug of display devices
Removed check to prevent hotplug of display devices within pciehp.
Originally this was thought to have been required within the PCI
Hotplug specification for some legacy devices.  However there is
no such requirement in the most recent revision. The check prevents
hotplug of not only display devices but also computational GPUs
which require serviceability.

Signed-off-by: Praveen Kalamegham <praveen@nextio.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-21 14:43:46 -07:00
Felix Radensky
3322340a9d PCI: Allow manual resource allocation for PCI hotplug bridges
At the moment only PCI-E briges can be flagged as hotplug, thus
allowing manual resource preallocation via pci=hpmemsize=nnM and
pci=hpiosize=nnM kernel parameters. Some PCI hotplug bridges, e.g.
PLX 6254 can also benefit from this functionalily, as kernel fails
to properly allocate their resources when hotplug device is added
and PCI bus is rescanned.

This patch adds header quirk for PLX 6254 that marks this bridge
as hotplug. Other PCI bridges with similar problems can use it
as well.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-21 14:43:45 -07:00
Chris Wright
de139a3393 pci: check caps from sysfs file open to read device dependent config space
The PCI config space bin_attr read handler has a hardcoded CAP_SYS_ADMIN
check to verify privileges before allowing a user to read device
dependent config space.  This is meant to protect from an unprivileged
user potentially locking up the box.

When assigning a PCI device directly to a guest with libvirt and KVM,
the sysfs config space file is chown'd to the unprivileged user that
the KVM guest will run as.  The guest needs to have full access to the
device's config space since it's responsible for driving the device.
However, despite being the owner of the sysfs file, the CAP_SYS_ADMIN
check will not allow read access beyond the config header.

With this patch we check privileges against the capabilities used when
openining the sysfs file.  The allows a privileged process to open the
file and hand it to an unprivileged process, and the unprivileged process
can still read all of the config space.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:32 -07:00
Chris Wright
2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Linus Torvalds
f39d01be4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits)
  vlynq: make whole Kconfig-menu dependant on architecture
  add descriptive comment for TIF_MEMDIE task flag declaration.
  EEPROM: max6875: Header file cleanup
  EEPROM: 93cx6: Header file cleanup
  EEPROM: Header file cleanup
  agp: use NULL instead of 0 when pointer is needed
  rtc-v3020: make bitfield unsigned
  PCI: make bitfield unsigned
  jbd2: use NULL instead of 0 when pointer is needed
  cciss: fix shadows sparse warning
  doc: inode uses a mutex instead of a semaphore.
  uml: i386: Avoid redefinition of NR_syscalls
  fix "seperate" typos in comments
  cocbalt_lcdfb: correct sections
  doc: Change urls for sparse
  Powerpc: wii: Fix typo in comment
  i2o: cleanup some exit paths
  Documentation/: it's -> its where appropriate
  UML: Fix compiler warning due to missing task_struct declaration
  UML: add kernel.h include to signal.c
  ...
2010-05-20 09:20:59 -07:00
Huang Ying
affb72c3a8 ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup
Now, a dedicated HEST tabling parsing code is used for PCIE AER
firmware_first setup. It is rebased on general HEST tabling parsing
code of APEI. The firmware_first setup code is moved from PCI core to
AER driver too, because it is only AER related.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19 22:40:14 -04:00
Ben Hutchings
fd0c889489 intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables
We now know how to deal with these tables so that they are harmless.
Set TAINT_FIRMWARE_WORKAROUND instead of the default TAINT_WARN.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19 08:38:11 +01:00
Ben Hutchings
3a8663ee61 intel-iommu: Combine the BIOS DMAR table warning messages
We have nearly the same code for warnings repeated four times.  Move
it into a separate function.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19 08:37:58 +01:00
Julia Lawall
8f6bce3c4f PCI hotplug: Use kmemdup
Use kmemdup when some other buffer is immediately copied into the
allocated region.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
statement S;
@@

-  to = \(kmalloc\|kzalloc\)(size,flag);
+  to = kmemdup(from,size,flag);
   if (to==NULL || ...) S
-  memcpy(to, from, size);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 15:02:09 -07:00
Prarit Bhargava
5030718ee4 PCI: output FW warning in pci_read/write_vpd
pci_read/write_vpd() can fail due to a timeout.  Usually the command
times out because of firmware issues (incorrect vpd length, etc.) on the
PCI card.  Currently, the timeout occurs silently.

Output a message to the user indicating that they should check with
their vendor for new firmware.

Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 15:00:25 -07:00
Roman Fietze
ee6583f6e8 PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments
This fixes all occurrences of pci_enable_device and pci_disable_device
in all comments. There are no code changes involved.

Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 14:59:08 -07:00
Alex Deucher
9313ff4504 PCI quirks: disable msi on AMD rs4xx internal gfx bridges
Doesn't work reliably for internal gfx.  Fixes kernel bug
https://bugzilla.kernel.org/show_bug.cgi?id=15626.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 14:33:07 -07:00
Ben Hutchings
e4146bb908 PCI: Disable MSI for MCP55 on P5N32-E SLI
As reported in <http://bugs.debian.org/552299>, MSI appears to be
broken for this on-board device.  We already have a quirk for the
P5N32-SLI Premium; extend it to cover both variants of the board.

Reported-by: Romain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18 14:32:32 -07:00
Linus Torvalds
8123d8f17d Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Add amd_iommu=off command line option
  iommu-api: Remove iommu_{un}map_range functions
  x86/amd-iommu: Implement ->{un}map callbacks for iommu-api
  x86/amd-iommu: Make amd_iommu_iova_to_phys aware of multiple page sizes
  x86/amd-iommu: Make iommu_unmap_page and fetch_pte aware of page sizes
  x86/amd-iommu: Make iommu_map_page and alloc_pte aware of page sizes
  kvm: Change kvm_iommu_map_pages to map large pages
  VT-d: Change {un}map_range functions to implement {un}map interface
  iommu-api: Add ->{un}map callbacks to iommu_ops
  iommu-api: Add iommu_map and iommu_unmap functions
  iommu-api: Rename ->{un}map function pointers to ->{un}map_range
2010-05-18 07:22:37 -07:00
Tom Lyon
8954da1f82 intel-iommu: intel_iommu_map_range failed at very end of address space
intel_iommu_map_range() doesn't allow allocation at the very end of the
address space; that code has been simplified and corrected.

Signed-off-by: Tom Lyon <pugs@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-17 08:34:20 +01:00
Tom Lyon
a99c47a228 intel-iommu: errors with smaller iommu widths
When using iommu_domain_alloc with the Intel iommu, the domain address
width is always initialized to 48 bits (agaw 2).  This domain->agaw value
is then used by pfn_to_dma_pte to (always) build a 4 level page table.
However, not all systems support iommu width of 48 or 4 level page tables.
In particular, the Core i5-660 and i5-670 support an address width of 36
bits (not 39!), an agaw of only 1, and only 3 level page tables.

This version of the patch simply lops off extra levels of the page tables
if the agaw value of the iommu is less than what is currently allocated
for the domain (in intel_iommu_attach_device).  If there were already
allocated addresses above what the new iommu can handle, EFAULT is
returned.

Signed-off-by: Tom Lyon <pugs@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-17 08:34:18 +01:00
Linus Torvalds
769d9968e4 Revert "PCI: update bridge resources to get more big ranges in PCI assign unssigned"
This reverts commit 977d17bb17, because it
can cause problems with some devices not getting any resources at all
when the resource tree is re-allocated.

For an example of this, see

	https://bugzilla.kernel.org/show_bug.cgi?id=15960
	(originally https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4982)
	(lkml thread: http://lkml.org/lkml/2010/4/19/20)

where Peter Henriksson reported his Xonar DX sound card gone, because
the IO port region was no longer allocated.

Reported-bisected-and-tested-by: Peter Henriksson <peter.henriksson@gmail.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Requested-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-12 18:39:45 -07:00
Hidetoshi Seto
caa5afbd48 PCI: aerdrv: trivial cleanup for aerdrv_core.c
Style cleanup for pci_{en,dis}able_pcie_error_reporting().

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:40 -07:00
Hidetoshi Seto
f6d3780061 PCI: aerdrv: trivial cleanup for aerdrv.c
Skip zero-ing in aer_alloc_rpc() since it is allocated by kzalloc().
The closing comment marker "*/" is recommended for kernel-doc comments.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:39 -07:00
Hidetoshi Seto
89713422a7 PCI: aerdrv: introduce default_downstream_reset_link
I noticed that when I inject a fatal error to an endpoint via
aer-inject, aer_root_reset() is called as reset_link for a
downstream port at upstream of the endpoint:

  pcieport 0000:00:06.0: AER: Uncorrected (Fatal) error received: id=5401
   :
  pcieport 0000:52:02.0: Root Port link has been reset

It externally appears to be working, but internally issues some
accesses to PCI_ERR_ROOT_COMMAND/STATUS registers that is for
root port so not available on downstream port.

This patch introduces default_downstream_reset_link that is
a version of aer_root_reset() with no accesses to root port's
register. It is used for downstream ports that has no reset_link
function its specific.

This patch also updates related description in pcieaer-howto.txt.
Some minor fixes are included.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:38 -07:00
Hidetoshi Seto
517cae3829 PCI: aerdrv: rework find_aer_service
The structure find_aer_service_data is no longer useful.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reviewed-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:38 -07:00
Hidetoshi Seto
4f7ccf6a60 PCI: aerdrv: remove is_downstream
The pcie->port of port service device points the port associated
the service with.  The find_aer_service iterates over children of
given port udev.

So it is clear that the pcie->port of port service of given port
udev must always point the udev.

Therefore we can know the type of udev without checking its children.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:37 -07:00
Hidetoshi Seto
e167bfcaa4 PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS
Make it clear that we only interest in 2 *_RCV bits.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:37 -07:00
Hidetoshi Seto
f647a44f57 PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC
The Error Source Identification Register (Offset 34h) is 4 byte
which contains a couple of 2 byte field, "[15:0] ERR_COR Source
Identification" and "[31:16] ERR_FATAL/NONFATAL Source Identification."

This patch defines PCI_ERR_ROOT_ERR_SRC to make dword access sensible.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:34 -07:00
Hidetoshi Seto
17e21854bd PCI: aerdrv: rework do_recovery
Move dev_printks for debug into do_recovery().
This allows do_recovery() to return void.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:33 -07:00
Hidetoshi Seto
88da13bfab PCI: aerdrv: rework get_e_source()
Current get_e_source() returns pointer to an element of array.
However since it also progress consume counter, it is possible
that the element is overwritten by newly produced data before
the element is really consumed.

This patch changes get_e_source() to copy contents of the element
to address pointed by its caller.  Once copied the element in
array can be consumed.

And relocate this function to more innocuous place.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:33 -07:00
Hidetoshi Seto
7c4ec94f72 PCI: aerdrv: rework aer_isr_one_error()
Divide tricky for-loop into readable if-blocks.

The logic to set multi_error_valid (to force walking pci bus
hierarchy to find 2nd~ error devices) is changed too, to check
MULTI_{,_UN}COR_RCV bit individually and to force walk only when
it is required.

And rework setting e_info->severity for uncorrectable, not to use
magic numbers.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:16 -07:00
Hidetoshi Seto
4a0c096efd PCI: aerdrv: rework add_error_device
Stop iteration if we cannot register any more.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:15 -07:00
Hidetoshi Seto
bd17d4742d PCI: aerdrv: remove compare_device_id
Inline too-simple subroutine only used here.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:15 -07:00
Hidetoshi Seto
c887275e6a PCI: aerdrv: introduce is_error_source
Take core part of find_device_iter() to make a new function
is_error_source() that checks given device has report an error
or not.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:14 -07:00
Hidetoshi Seto
98ca3964fe PCI: aerdrv: rework find_source_device
Return bool to indicate that the source device is found or not.
This allows us to skip calling aer_process_err_devices() if we can.

And move dev_printk for debug into this function.

v2: return bool instead of int

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:14 -07:00
Hidetoshi Seto
843f4697ee PCI: aerdrv: make aer_{en,dis}able_rootport static
These functions are only called from init/remove path of aerdrv,
so move them from aerdrv_core.c to aerdrv.c, to make them static.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:13 -07:00
Hidetoshi Seto
460d298d52 PCI: aerdrv: cleanup inconsistent functions
This cleanup solves some minor naming issues by removing unuseful
function aer_delete_rootport() and by renaming disable_root_aer()
to aer_disable_rootport().

- Inconsistent location of alloc & free:
   The struct rpc is allocated in aer_alloc_rpc() at aerdrv.c
   while it is implicitly freed in aer_delete_rootport() at
   aerdrv_core.c.

- Inconsistent function name:
   It makes a bit confusion that aer_delete_rootport() is seemed
   to be paired with aer_enable_rootport(), i.e. there is neither
   "add" against "delete" nor "disable" against "enable".

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:13 -07:00
Hidetoshi Seto
c6d34eddec PCI: aerdrv: RsvdP of PCI_ERR_ROOT_COMMAND
Handle preserved bits properly.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:12 -07:00
Michal Schmidt
447c5dd733 PCI: return correct value when writing to the "reset" attribute
A successful write() to the "reset" sysfs attribute should return the
number of bytes written, not 0. Otherwise userspace (bash) retries the
write over and over again.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:11 -07:00
Jesse Barnes
3196180a54 PCI: change PCI_MSI help text to recommend enabling
Most current machines have no problem with this, and in fact many devices and
features work best (or only!) with MSI.

Reported-by: Petteri Räty <betelgeuse@gentoo.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:10 -07:00
Thomas Gleixner
511dd98ce8 PCI: Convert pci_lock to raw_spinlock
pci_lock must be a real spinlock in preempt-rt. Convert it to
raw_spinlock. No change for !RT kernels.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:09 -07:00
Alan Stern
52b265a127 PCI: clearing wakeup flags not needed
This patch (as1353) removes a couple of unnecessary assignments from
the PCI core.  The should_wakeup flag is naturally initialized to 0;
there's no need to clear it.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:08 -07:00
Alex Chiang
75568f8094 PCI: create function symlinks in /sys/bus/pci/slots/N/
Create convenience symlinks in sysfs, linking slots to device
functions, and vice versa. These links make it easier for users to
figure out which devices actually live in what slots.

For example:

sapphire:/sys/bus/pci/slots # ls
1  10  2  3  4  5  6  7  8  9

sapphire:/sys/bus/pci/slots # ls -l 3
total 0
-r--r--r-- 1 root root 65536 Aug 18 14:10 address
lrwxrwxrwx 1 root root     0 Aug 18 14:10 function0 ->
../../../../devices/pci0000:23/0000:23:01.0
lrwxrwxrwx 1 root root     0 Aug 18 14:10 function1 ->
../../../../devices/pci0000:23/0000:23:01.1

sapphire:/sys/bus/pci/slots # ls -l 3/function0/slot
lrwxrwxrwx 1 root root 0 Aug 18 14:13 3/function0/slot ->
../../../bus/pci/slots/3

The original form of this patch was written by Matthew Wilcox,
and was enhanced to include links from the sysfs slots/ directory
pointing back at the device functions.

Cc: willy@linux.intel.com
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-11 12:01:07 -07:00
Joerg Roedel
795e74f7a6 Merge branch 'iommu/largepages' into amd-iommu/2.6.35
Conflicts:
	arch/x86/kernel/amd_iommu.c
2010-05-11 17:40:57 +02:00
Bill Pemberton
8356dda2a5 PCI: make bitfield unsigned
Fix sparse warning:

drivers/pci/pci.h:247:25: error: dubious one-bit signed bitfield

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-pci@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:07:20 +02:00
Linus Torvalds
553cbf0a8f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/ps3: Update ps3_defconfig
  powerpc/ps3: Update platform maintainer
  powerpc/pseries: Flush lazy kernel mappings after unplug operations
  powerpc/numa: Add form 1 NUMA affinity
  powerpc/fsl-booke: Fix CONFIG_RELOCATABLE support on FSL Book-E ppc32
  powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
  powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED
  powerpc/83xx: configure SIL SATA driver in 83xx-wide defconfig
  powerpc/83xx: enable EPOLL syscall in defconfig
  powerpc/83xx: add RTC drivers in 83xx defconfig
  powerpc/fsl-cpm: Configure clock correctly for SCC
  powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYS
  powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=n
2010-04-29 17:16:36 -07:00