Commit Graph

198 Commits

Author SHA1 Message Date
Nishanth Aravamudan
0287ebedfa [PATCH] ppc64: replace schedule_timeout() with msleep_interruptible()
Use msleep_interruptible() instead of schedule_timeout() in ppc64-specific
code to cleanup/simplify the sleeping logic.  Change the units of the
parameter of do_event_scan_all_cpus() to milliseconds from jiffies.  The
return value of rtas_extended_busy_delay_time() was incorrectly being used
as a jiffies value (it is actually milliseconds), which is fixed by using
the value as a parameter to msleep_interruptible().  Also, use
rtas_extended_busy_delay_time() in another case where similar logic is
duplicated.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:01 -07:00
Olof Johansson
233ccd0d04 [PATCH] ppc64: Add VMX save flag to VPA
We need to indicate to the hypervisor that it needs to save our VMX
registers when switching partitions on a shared-processor system, just as
it needs to for FP and PMC registers.

This could be made to be on-demand when VMX is used, but we don't do that
for FP nor PMC right now either so let's not overcomplicate things.

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: <engebret@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:01 -07:00
Joel Schopp
597f95e2bf [PATCH] ppc64: lparconfig.c memory leak
This patch fixes a rare memory leak found by Coverity.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:42:35 +10:00
Joel Schopp
5ff98ae18b [PATCH] ppc64: of_device.c remove useless code
Coverity found more unused code.

Signed-off-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:42:33 +10:00
Olof Johansson
7fea82ab1a [PATCH] PPC64: Don't try to claim memory from OF at 1GB mark
Some RS64-based machines (p620, F80, others) have problems with firmware
returning 0xdeadbeef instead of failure to allocations that end at the
1GB mark.

We have two options:
1. Detect the undocumented 0xdeadbeef return value and interpret it as
a failure.
2. Avoid allocating that high.

(2) is really the cleaner solution here. 768MB is plenty of room so use
that as the max alloc_top instead of 1GB.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:32:08 +10:00
Stephen Rothwell
fb120da678 [PATCH] Make MODULE_DEVICE_TABLE work for vio devices
Make MODULE_DEVICE_TABLE work for vio devices.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:31:56 +10:00
Stephen Rothwell
71d276d751 [PATCH] Create vio_bus_ops
Create vio_bus_ops so that we just pass a structure to vio_bus_init
instead of three separate function pointers.

Rearrange vio.h to avoid forward references. vio.h only needs
struct device_node from prom.h so remove the include and just
declare it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00
Stephen Rothwell
b877b90f22 [PATCH] Create vio_register_device
Take some assignments out of vio_register_device_common and
rename it to vio_register_device.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00
Stephen Rothwell
5c0b4b8759 [PATCH] Formatting changes to vio.c
Formatting changes to vio.c to bring it closer to the
kernel coding standard.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:08:53 +10:00
Stephen Rothwell
1e4a79e045 [PATCH] fix iSeries build for gcc-3.4
gcc 3.4 (at least the build we are using) puts the gcc generated .ident
string into a .note section at the end of the files it compiles (gcc
3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section).  This
means that the lparmap.s file we produce in the iSeries build may end with
a .note section.  When we include it into head.S, the assembler can no
longer resolve some of the conditional branches since the target label
ends up too far away.  This patch just forces us back to the .text section
after including lparmap.s.

The breakage was caused by my patch "iSeries build with newer assemblers
and compilers" (sha1-id: 2ad5649662).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:08:53 +10:00
David Gibson
2739e8cf11 [PATCH] Restore lparmap.s include for iSeries
A mistake rebasing the series of ppc64 head.S cleanup patches meant
the #include of lparmap.s, needed for iSeries was lost.  This patch
puts it back again.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 12:59:48 +10:00
Linus Torvalds
40193713df Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 2005-08-29 17:11:29 -07:00
Steven Rostedt
69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
David Gibson
c594adad56 [PATCH] Dynamic hugepage addresses for ppc64
Paulus, I think this is now a reasonable candidate for the post-2.6.13
queue.

Relax address restrictions for hugepages on ppc64

Presently, 64-bit applications on ppc64 may only use hugepages in the
address region from 1-1.5T.  Furthermore, if hugepages are enabled in
the kernel config, they may only use hugepages and never normal pages
in this area.  This patch relaxes this restriction, allowing any
address to be used with hugepages, but with a 1TB granularity.  That
is if you map a hugepage anywhere in the region 1TB-2TB, that entire
area will be reserved exclusively for hugepages for the remainder of
the process's lifetime.  This works analagously to hugepages in 32-bit
applications, where hugepages can be mapped anywhere, but with 256MB
(mmu segment) granularity.

This patch applies on top of the four level pagetable patch
(http://patchwork.ozlabs.org/linuxppc64/patch?id=1936).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
9a5573e378 [PATCH] ppc64: Check of_chosen in check_for_initrd()
You can't call get_property() on a NULL node, so check if of_chosen is set
in check_for_initrd().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/setup.c |   20 ++++++++++++--------
 1 files changed, 12 insertions(+), 8 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
95920324f5 [PATCH] ppc64: unflatten_device_tree() should check if lmb_alloc() fails
unflatten_device_tree() doesn't check if lmb_alloc() succeeds or not, it
should. All it can do is panic, but at least there's an error message
(assuming you have some sort of console at that point).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/prom.c |    9 +++++++--
 1 files changed, 7 insertions(+), 2 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
145ec7d51a [PATCH] ppc64: Fix a misleading printk in unflatten_dt_node()
When unflatten_dt_node() fails to find an OF_DT_END_NODE tag it prints
"Weird tag at start of node", this should be "Weird tag at end of node".

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

 arch/ppc64/kernel/prom.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Michael Ellerman
180a33627d [PATCH] ppc64: Move ppc64_enable_pmcs() logic into a ppc_md function
This patch moves power4_enable_pmcs() to arch/ppc64/kernel/pmc.c.

I've tested it on P5 LPAR and P4. It does what it used to.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:38 +10:00
Olaf Hering
b13cfd173f [PATCH] ppc64: allow xmon=off
If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config,
there is no way to disable xmon again. setup_system calls first xmon_init,
later parse_early_param. So a new 'xmon=off' cmdline option will do the right
thing.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
71e1f55ad4 [PATCH] ppc64: Simplify some lmb functions
lmb_phys_mem_size() can always return lmb.memory.size, as long as it's called
after lmb_analyze(), which it is. There's no need to recalculate the size on
every call.

lmb_analyze() was calculating a few things we then threw away, so just don't
calculate them to start with.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
180379dcef [PATCH] ppc64: Remove physbase from the lmb_property struct
We no longer need the lmb code to know about abs and phys addresses, so
remove the physbase variable from the lmb_property struct.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
e88bcd1b29 [PATCH] ppc64: Remove redundant abs_to_phys() macro
abs_to_phys() is a macro that turns out to do nothing, and also has the
unfortunate property that it's not the inverse of phys_to_abs() on iSeries.

The following is for my benefit as much as everyone else.

With CONFIG_MSCHUNKS enabled, the lmb code is changed such that it keeps
a physbase variable for each lmb region. This is used to take the possibly
discontiguous lmb regions and present them as a contiguous address space
beginning from zero.

In this context each lmb region's base address is its "absolute" base
address, and its physbase is it's "physical" address (from Linux's point of
view). The abs_to_phys() macro does the mapping from "absolute" to "physical".

Note: This is not related to the iSeries mapping of physical to absolute
(ie. Hypervisor) addresses which is maintained with the msChunks structure.
And the msChunks structure is not controlled via CONFIG_MSCHUNKS.

Once upon a time you could compile for non-iSeries with CONFIG_MSCHUNKS
enabled. But these days CONFIG_MSCHUNKS depends on CONFIG_PPC_ISERIES, so
for non-iSeries code abs_to_phys() is a no-op.

On iSeries we always have one lmb region which spans from 0 to
systemcfg->physicalMemorySize (arch/ppc64/kernel/iSeries_setup.c line 383).
This region has a base (ie. absolute) address of 0, and a physbase address
of 0 (as calculated in lmb_analyze() (arch/ppc64/kernel/lmb.c line 144)).

On iSeries, abs_to_phys(aa) is defined as lmb_abs_to_phys(aa), which finds
the lmb region containing aa (and there's only one, ie. 0), and then does:

 return lmb.memory.region[0].physbase + (aa - lmb.memory.region[0].base)

physbase == base == 0, so you're left with "return aa".

So remove abs_to_phys(), and lmb_abs_to_phys() which is the implementation
of abs_to_phys() for iSeries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:37 +10:00
Michael Ellerman
a4a0f97020 [PATCH] ppc64: Remove redundant use of pointers in lmb code
The lmb code is all written to use a pointer to an lmb struct. But it's always
the same lmb struct, called "lmb". So we take the address of lmb, call it
_lmb and then start using _lmb->foo everywhere, which is silly.

This patch removes the _lmb pointers and replaces them with direct references
to the one "lmb" struct. We do the same for some _mem and _rsv pointers which
point to lmb.memory and lmb.reserved respectively.

This patch looks quite busy, but it's basically just:
s/_lmb->/lmb./g
s/_mem->/lmb.memory./g
s/_rsv->/lmb.reserved./g
s/_rsv/&lmb.reserved/g
s/mem->/lmb.memory./g

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
aefd16b0c5 [PATCH] ppc64: Remove redundant uses of physRpn_to_absRpn
physRpn_to_absRpn is a no-op on non-iSeries platforms, remove the two
redundant calls.

There's only one caller on iSeries so fold the logic in there so we can get
rid of it completely.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
56e97b71bf [PATCH] ppc64: Rename msChunks structure
Rename the msChunks struct to get rid of the StUdlY caps and make it a bit
clearer what it's for.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:36 +10:00
Michael Ellerman
34c8f6961f [PATCH] ppc64: msChunks cleanups
Chunks are 256KB, so use constants for the size/shift/mask, rather than
getting them from the msChunks struct. The iSeries debugger (??) might still
need access to the values in the msChunks struct, so we keep them around
for now, but set them from the constant values.

Replace msChunks_entry typedef with regular u32.

Simplify msChunks_alloc() to manipulate klimit directly, rather than via
a parameter.

Move msChunks_alloc() and msChunks into iSeries_setup.c, as that's where
they're used.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Michael Ellerman
38e85dc180 [PATCH] ppc64: Remove PTRRELOC() from msChunks code
The msChunks code was written to work on pSeries, but now it's only used on
iSeries. This means there's no need to do PTRRELOC anymore, so remove it all.

A few places were getting "extern reloc_offset()" from abs_addr.h, move it
into system.h instead.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
aed3135194 [PATCH] ppc64: introduce FW_FEATURE_ISERIES
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
8d15a3e55f [PATCH] ppc64: make firmware_has_feature() stronger
Make firmware_has_feature() evaluate at compile time for the non pSeries
case and tidy up code where possible.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
1ababe1148 [PATCH] ppc64: create firmware_has_feature()
Create the firmware_has_feature() inline and move the firmware feature
stuff into its own header file.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:35 +10:00
Stephen Rothwell
7a6af5e380 [PATCH] ppc64: remove firmware features from cpu_spec
The firmware_features field of struct cpu_spec should really be a separate
variable as the firmware features do not depend on the chip and the
bitmask is constructed independently.  By removing it, we save 112 bytes
from the cpu_specs array and we access the bitmask directly instead of via
the cur_cpu_spec pointer.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
6fbb49d56d [PATCH] Move variables in ppc64 head.S from .data to .bss
The ppc64 head.S defines several zero-initialized structures, such as
the empty_zero_page and the kernel top-level pagetable.  Currently
they are defined to be in the data section.  However, they're not used
until after the bss is cleared, so this patch moves them to the bss,
saving two and a half pages from the vmlinux.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
91a57fc672 [PATCH] Tweak comments in ppc64 head.S
This patch adjust some comments in head.S for accuracy, clarity, and
spelling.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
1d086e6bd6 [PATCH] Remove unneeded #defines in head.S
arch/ppc64/kernel/head.S #defines SECONDARY_PROCESSORS then has some
#ifdefs based on it.  Whatever purpose this had is long lost, this
patch removes it.

Likewise, head.S defines H_SET_ASR, which is now defined, along with
other hypervisor call numbers in hvcall.h.  This patch deletes it, as
well, from head.S.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
60ba449457 [PATCH] Fix apparent code overlap in ppc64 head.S
An #if/#else construct near the top of ppc64's head.S appears to
create overlapping sections of code for iSeries and pSeries (i.e. one
thing on iSeries and something different in the same place on
pSeries).  In fact, checking the various absolute offsets, it doesn't.
This patch unravels the #ifdefs to make it more obvious what's going
on.  This accomplishes another microstep towards a single kernel image
which can boot both iSeries and pSeries.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:34 +10:00
David Gibson
0ab20002f4 [PATCH] Remove general use functions from head.S
As well as the interrupt vectors and initialization code, head.S
contains several asm functions which are used during runtime.  This
patch moves these to misc.S, a more sensible location for random asm
support code.  A couple The functions moved are:
	disable_kernel_fp
	giveup_fpu
	disable_kernel_altivec
	giveup_altivec
	__setup_cpu_power3	(empty function)

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
c59c464a3e [PATCH] Change address of ppc64 initial segment table
On ppc64 machines with segment tables, CPU0's segment table is at a
fixed address, currently 0x9000.  This patch moves it to the free
space at 0x6000, just below the fwnmi data area.  This saves 8k of
space in vmlinux and the runtime kernel image.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
ec465515ee [PATCH] Move iSeries and common vectors into unused space in head.S
In the ppc64 kernel head.S there is currently quite a lot of unused
space between the naca (at fixed address 0x4000) and the fwnmi data
area (at fixed address 0x7000).  This patch moves various exception
vectors and support code into this region to use the wasted space.

The functions load_up_fpu and load_up_altivec are moved down as well,
since they are essentially continuations of the fp_unavailable_common
and altivec_unavailable_common vectors, respectively.

Likewise, the fwnmi vectors themselves are moved down into this area,
because while the location of the fwnmi data area is fixed by the RPA,
the vectors themselves can be anywhere sufficiently low.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
David Gibson
2e2446ea07 [PATCH] Remove NACA fixed address constraint
Comments in head.S suggest that the iSeries naca has a fixed address,
because tools expect to find it there.  The only tool which appears to
access the naca is addRamDisk, but both the in-kernel version and the
version used in RHEL and SuSE in fact locate the NACA the same way as
the hypervisor does, by following the pointer in the hvReleaseData
structure.

Since the requirement for a fixed address seems to be obsolete, this
patch removes the naca from head.S and replaces it with a normal C
initializer.

For good measure, it removes an old version of addRamDisk.c which was
sitting, unused, in the ppc32 tree.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:33 +10:00
Stephen Rothwell
19dbd0f6a7 [PATCH] ppc64: split pSeries specific parts out of vio.c
This patch just splits out the pSeries specific parts of vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
6312236fe8 [PATCH] ppc64: make the bus matching function platform specific
This patch allows us to have a different bus if matching function for
each platform.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
8c65b5c955 [PATCH] ppc64: move iSeries vio iommu init
Since the iSeries vio iommu tables cannot be used until after the vio bus has
been initialised, move the initialisation of the tables to there.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Stephen Rothwell
3e494c8048 [PATCH] ppc64: split iSeries specific parts out of vio.c
This patch splits the iSeries specific parts out of vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:32 +10:00
Jake Moilanen
293da76b3d [PATCH] ppc64: PCI device-node failure detection
OpenFirmware marks devices as failed in the device-tree when a hardware
problem is detected.  The kernel needs to fail config reads/writes to
prevent a kernel crash when incorrect data is read.

This patch validates that the device-node is not marked "fail" when
config space reads/writes are attempted.

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
Benjamin Herrenschmidt
34153fa3af [PATCH] flattened device tree changes
This patch updates the format of the flattened device-tree passed
between the boot trampoline and the kernel to support a more compact
representation, for use by embedded systems mostly.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29 10:53:31 +10:00
Benjamin Herrenschmidt
5477d30e84 [PATCH] ppc64: Export machine_power_off for therm_pm72 module
This patch puts back the export of machine_power_off() that was removed
by some janitor as it's used for emergency shutdown by the G5 thermal
control driver. Wether that driver should use kernel_power_off() instead
is debatable and a post-2.6.13 decision. In the meantime, please commit
that patch that fixes the driver for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 09:41:35 -07:00
Brian King
ac9af7cba9 [PATCH] ppc64: iommu vmerge fix
This fixes a bug in the PPC64 iommu vmerge code which results in the
potential for iommu_unmap_sg to go off unmapping more than it should.

This was found on a test system which resulted in PCI bus errors due to
PCI memory being unmapped while DMAs were still in progress.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-17 14:41:22 -07:00
Stephen Rothwell
2ad5649662 [PATCH] iSeries build with newer assemblers and compilers
Paulus suggested that we put xLparMap in its own .c file so that we can
generate a .s file to be included into head.S.  This doesn't get around
the problem of having it at a fixed address, but it makes it more
palatable.

It would be good if this could be included in 2.6.13 as it solves our
build problems with various versions of binutils and gcc.  In
particular, it allows us to build an iSeries kernel on Debian unstable
using their biarch compiler.

This has been built and booted on iSeries and built for pSeries and g5.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-16 21:06:25 -07:00
Benjamin Herrenschmidt
e62b8b2bc7 [PATCH] ppc64: Fix Fan control for new PowerMac G5 2.7GHz machines
The workaround for broken device-tree that prevents fan control from
working on recent G5 models need to be "enabled" for machines with
revision 0x37 of the bridge in addition to machines with revision 0x35.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-10 11:07:40 -07:00
Dominik Brodowski
43c3473552 [PATCH] pci and yenta: pcibios_bus_to_resource
In yenta_socket, we default to using the resource setting of the CardBus
bridge.  However, this is a PCI-bus-centric view of resources and thus needs
to be converted to generic resources first.  Therefore, add a call to
pcibios_bus_to_resource() call in between.  This function is a mere wrapper on
x86 and friends, however on some others it already exists, is added in this
patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where
is its pcibios_resource_to_bus() ?).

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 21:32:46 -07:00