New microblaze systems uses two buses. One for memories
and flashes and the second for low-speed peripherals
which can run on different CLK. This is the reason
why the kernel is trying to read clock-frequency
directly from node. If there is then the kernel will
work with it. If not then cpu CLK is used.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Microblaze little-endian toolchain exports __MICROBLAZEEL__
which is used in the kernel to identify little/big endian.
The most of the changes are in loading values from DTB which
is always big endian.
Little endian platforms are based on new AXI bus which has
impact to early uartlite initialization.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Upcomming microblaze version will support little-endian.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Upcomming Microblaze is little endian that's why is necessary
to fix protocol and length loading.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: devicetree-discuss@lists.ozlabs.org
Use set_dma_ops and remove now used-once oddly named temp pointer sd.
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Kconfig blocks to select any other early console support that's why
this patch has no real impact on current kernel version. But it is done
because of uart16550.
Signed-off-by: Michal Simek <monstr@monstr.eu>
gpiolib returns -ENXIO if struct gpio_chip::to_irq isn't set, so it's
safe to always call.
Based on PPC patch
"powerpc/gpio: support gpio_to_irq()"
78331aded9
Signed-off-by: Michal Simek <monstr@monstr.eu>
Use asm-generic/pci-dma-compat.h instead of the homegrown
pci_set_dma_mask and pci_set_consistent_dma_mask.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
OUTPUT_FORMAT setup bigendian platform. Microblaze Linux port
is becoming bi endian that's why it is removed.
Signed-off-by: Michal Simek <monstr@monstr.eu>
CONFIG_CONTIGUOUS_PAGE_ALLOC doesn't exist in Kconfig, therefore removing
all references to it from the source.
Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
Kernel needs two timers because of clocksource and clockevent.
It is better to show warning message directly on early
console if available. If it isn't available kernel log buffer
contains it.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signal code uses r3 value which saved in restore_sigcontext to
rt_sigframe but it require to be zeroed. If is not zero rt_sigframe
contains wrong values.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Do not save return registers before rt_sigreturn is called.
_user_exception(syscall handler) already setup return address
that's why it is removed from rt_sigreturn_wrapper.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Old gdb uses priviledged exception handler to handle
gdb exception. New gdb uses brki r16, 0x18 that's why
we can remove old gdb support.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Compilation warning:
mm/memory.c: In function '__pte_alloc':
mm/memory.c:421: warning: assignment makes integer from pointer without a cast
Signed-off-by: Michal Simek <monstr@monstr.eu>
I forget to remove unused variable from kgdb_arch_handle_exception.
Fix return value in microblaze_kgdb_break function.
Error log:
arch/microblaze/kernel/kgdb.c: In function 'microblaze_kgdb_break':
arch/microblaze/kernel/kgdb.c:83: warning: 'return' with a value, in function returning void
arch/microblaze/kernel/kgdb.c: In function 'kgdb_arch_handle_exception':
arch/microblaze/kernel/kgdb.c:119: warning: unused variable 'cpu'
Signed-off-by: Michal Simek <monstr@monstr.eu>
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus:
MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls.
MAINTAINERS: Change list for ioc_serial to linux-serial.
SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure
MIPS: jz4740: Fix Kbuild Platform file.
MIPS: Repair Kbuild make clean breakage.
If the host is slow in reading data or doesn't read data at all,
blocking write calls not only blocked the program that called write()
but the entire guest itself.
To overcome this, let's not block till the host signals it has given
back the virtio ring element we passed it. Instead, send the buffer to
the host and return to userspace. This operation then becomes similar
to how non-blocking writes work, so let's use the existing code for this
path as well.
This code change also ensures blocking write calls do get blocked if
there's not enough room in the virtio ring as well as they don't return
-EAGAIN to userspace.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Ralf: Michel's original patch only fixed N32; I replicated the same fix
for O32.]
Signed-off-by: Michel Thebeau <michel.thebeau@windriver.com>
Cc: paul.gortmaker@windriver.com
Cc: bruce.ashfield@windriver.com
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
IOC3 is also being used on SGI MIPS systems but this particular driver is
only being used on IA64 systems so linux-mips made no sense as a list. Pat
also thinks linux-serial@vger.kernel.org is the better list.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In this code, 0 is returned on memory allocation failure, even though other
failures return -ENOMEM or other similar values.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression ret;
expression x,e1,e2,e3;
@@
ret = 0
... when != ret = e1
*x = \(kmalloc\|kcalloc\|kzalloc\)(...)
... when != ret = e2
if (x == NULL) { ... when != ret = e3
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
To: Pat Gefre <pfg@sgi.com>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1704/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The platform specific files should be included via the platform-y
variable.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Patchwork: https://patchwork.linux-mips.org/patch/1719/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When running make clean, Kbuild doesn't process the .config file, so nothing
generates a platform-y variable. We can get it to descend into the platform
directories by setting $(obj-).
The dec Platform file was unconditionally setting platform-, obliterating
its previous contents and preventing some directories from being cleaned.
This is change to an append operation '+=' to allow cavium-octeon to be
cleaned.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Patchwork: https://patchwork.linux-mips.org/patch/1718/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
