The prioritized bit vector manipulation functions are useful in both vmx and
svm.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We ignore writes to the performance counters and performance event
selector registers already. Kaspersky antivirus reads the eventsel
MSR causing it to crash with the current behaviour.
Return 0 as data when the eventsel registers are read to stop the
crash.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
free_mmu_pages() should only undo what alloc_mmu_pages() does.
Free mmu pages from the generic VM destruction function, kvm_destroy_vm().
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
After discussion with Marcelo, we decided to rework device assignment framework
together. The old problems are kernel logic is unnecessary complex. So Marcelo
suggest to split it into a more elegant way:
1. Split host IRQ assign and guest IRQ assign. And userspace determine the
combination. Also discard msi2intx parameter, userspace can specific
KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to
enable MSI to INTx convertion.
2. Split assign IRQ and deassign IRQ. Import two new ioctls:
KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ.
This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the
old interface).
[avi: replace homemade bitcount() by hweight_long()]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fix this sparse warnings:
arch/x86/kvm/lapic.c:916:22: warning: symbol 'lapic_timer_ops' was not declared. Should it be static?
arch/x86/kvm/i8254.c:268:22: warning: symbol 'kpit_ops' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The new way does not require additional loop over vcpus to calculate
the one with lowest priority as one is chosen during delivery bitmap
construction.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
There is no reason to update the shadow pte here because the guest pte
is only changed to dirty state.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Hide the internals of vcpu awakening / injection from the in-kernel
emulated timers. This makes future changes in this logic easier and
decreases the distance to more generic timer handling.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We can infer elapsed time from hrtimer_expires_remaining.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This issue just appeared in kvm-84 when running on 2.6.28.7 (x86-64)
with PREEMPT enabled.
We're getting syslog warnings like this many (but not all) times qemu
tells KVM to run the VCPU:
BUG: using smp_processor_id() in preemptible [00000000] code:
qemu-system-x86/28938
caller is kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
Pid: 28938, comm: qemu-system-x86 2.6.28.7-mtyrel-64bit
Call Trace:
debug_smp_processor_id+0xf7/0x100
kvm_arch_vcpu_ioctl_run+0x5d1/0xc70 [kvm]
? __wake_up+0x4e/0x70
? wake_futex+0x27/0x40
kvm_vcpu_ioctl+0x2e9/0x5a0 [kvm]
enqueue_hrtimer+0x8a/0x110
_spin_unlock_irqrestore+0x27/0x50
vfs_ioctl+0x31/0xa0
do_vfs_ioctl+0x74/0x480
sys_futex+0xb4/0x140
sys_ioctl+0x99/0xa0
system_call_fastpath+0x16/0x1b
As it turns out, the call trace is messed up due to gcc's inlining, but
I isolated the problem anyway: kvm_write_guest_time() is being used in a
non-thread-safe manner on preemptable kernels.
Basically kvm_write_guest_time()'s body needs to be surrounded by
preempt_disable() and preempt_enable(), since the kernel won't let us
query any per-CPU data (indirectly using smp_processor_id()) without
preemption disabled. The attached patch fixes this issue by disabling
preemption inside kvm_write_guest_time().
[marcelo: surround only __get_cpu_var calls since the warning
is harmless]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
It's also convenient when we extend KVM supported vcpu number in the future.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Would be used with bit ops, and would be easily extended if KVM_MAX_VCPUS is
increased.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Windows 2008 accesses this MSR often on context switch intensive workloads;
since we run in guest context with the guest MSR value loaded (so swapgs can
work correctly), we can simply disable interception of rdmsr/wrmsr for this
MSR.
A complication occurs since in legacy mode, we run with the host MSR value
loaded. In this case we enable interception. This means we need two MSR
bitmaps, one for legacy mode and one for long mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
The processor is documented to reload the PDPTRs while in PAE mode if any
of the CR4 bits PSE, PGE, or PAE change. Linux relies on this
behaviour when zapping the low mappings of PAE kernels during boot.
The code already handled changes to CR4.PAE; augment it to also notice changes
to PSE and PGE.
This triggered while booting an F11 PAE kernel; the futex initialization code
runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem
ended up uninitialized, killing PI futexes and pulseaudio which uses them.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
The paravirt tlb flush may be used not only to flush TLBs, but also
to reload the four page-directory-pointer-table entries, as it is used
as a replacement for reloading CR3. Change the code to do the entire
CR3 reloading dance instead of simply flushing the TLB.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM optimizes guest port 80 accesses by passthing them through to the host.
Some AMD machines die on port 80 writes, allowing the guest to hard-lock the
host.
Remove the port passthrough to avoid the problem.
Cc: stable@kernel.org
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Tested-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some processors don't have EFER; don't oops if userspace wants us to
read EFER when we check NX.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
AMDs VMCB does not have an explicit unusable segment descriptor field,
so we emulate it by using "not present". This has to be setup before
the fixups, because this field is used there.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly unregister cpufreq notifier on onload if it was registered
during init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Not releasing the time_page causes a leak of that page or the compound
page it is situated in.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
vmx_set_msr() does not allow i386 guests to touch EFER, but they can still
do so through the default: label in the switch. If they set EFER_LME, they
can oops the host.
Fix by having EFER access through the normal channel (which will check for
EFER_LME) even on i386.
Reported-and-tested-by: Benjamin Gilbert <bgilbert@cs.cmu.edu>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
When kvm emulates an invlpg instruction, it can drop a shadow pte, but
leaves the guest tlbs intact. This can cause memory corruption when
swapping out.
Without this the other cpu can still write to a freed host physical page.
tlb smp flush must happen if rmap_remove is called always before mmu_lock
is released because the VM will take the mmu_lock before it can finally add
the page to the freelist after swapout. mmu notifier makes it safe to flush
the tlb after freeing the page (otherwise it would never be safe) so we can do
a single flush for multiple sptes invalidated.
Cc: stable@kernel.org
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: Make symbols static.
Fix this sparse warnings:
arch/x86/kvm/mmu.c:992:5: warning: symbol 'mmu_pages_add' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1124:5: warning: symbol 'mmu_pages_next' was not declared. Should it be static?
arch/x86/kvm/mmu.c:1144:6: warning: symbol 'mmu_pages_clear_parents' was not declared. Should it be static?
arch/x86/kvm/x86.c:2037:5: warning: symbol 'kvm_read_guest_virt' was not declared. Should it be static?
arch/x86/kvm/x86.c:2067:5: warning: symbol 'kvm_write_guest_virt' was not declared. Should it be static?
virt/kvm/irq_comm.c:220:5: warning: symbol 'setup_routing_entry' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: Attribute function with __acquires(...) resp. __releases(...).
Fix this sparse warnings:
arch/x86/kvm/i8259.c:34:13: warning: context imbalance in 'pic_lock' - wrong count at exit
arch/x86/kvm/i8259.c:39:13: warning: context imbalance in 'pic_unlock' - unexpected unlock
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
is_long_mode currently checks the LongModeEnable bit in
EFER instead of the LongModeActive bit. This is wrong, but
we survived this till now since it wasn't triggered. This
breaks guests that go from long mode to compatibility mode.
This is noticed on a solaris guest and fixes bug #1842160
Signed-off-by: Amit Shah <amit.shah@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
setup_msrs() should be called when entering long mode to save the
shadow state for the 64-bit guest state.
Using vmx_set_efer() in enter_lmode() removes some duplicated code
and also ensures we call setup_msrs(). We can safely pass the value
of shadow_efer to vmx_set_efer() as no other bits in the efer change
while enabling long mode (guest first sets EFER.LME, then sets CR0.PG
which causes a vmexit where we activate long mode).
With this fix, is_long_mode() can check for EFER.LMA set instead of
EFER.LME and 5e23049e86dd298b72e206b420513dbc3a240cd9 can be reverted.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the paging_fetch function rmap_remove is called after setting a large
pte to non-present. This causes rmap_remove to not drop the reference to
the large page. The result is a memory leak of that page.
Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the segment descriptor _cache_ the accessed bit is always set
(although it can be cleared in the descriptor itself). Since Intel
checks for this condition on a VMENTRY, set this bit in the AMD path
to enable cross vendor migration.
Cc: stable@kernel.org
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Acked-By: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The assertion no longer makes sense since we don't clear page tables on
allocation; instead we clear them during prefetch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The following code flow is unnecessary:
if (largepage)
was_rmapped = is_large_pte(*shadow_pte);
else
was_rmapped = 1;
The is_large_pte() function will always evaluate to one here because the
(largepage && !is_large_pte) case is already handled in the first
if-clause. So we can remove this check and set was_rmapped to one always
here.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvmclock currently falls apart on machines without constant tsc.
This patch fixes it. Changes:
* keep tsc frequency in a per-cpu variable.
* handle kvmclock update using a new request flag, thus checking
whenever we need an update each time we enter guest context.
* use a cpufreq notifier to track frequency changes and force
kvmclock updates.
* send ipis to kick cpu out of guest context if needed to make
sure the guest doesn't see stale values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Looks like neither the direction nor the rep prefix are used anymore.
Drop related evaluations from SVM's and VMX's I/O exit handlers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
AMD K10 CPUs implement the FFXSR feature that gets enabled using
EFER. Let's check if the virtual CPU description includes that
CPUID feature bit and allow enabling it then.
This is required for Windows Server 2008 in Hyper-V mode.
v2 adds CPUID capability exposure
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.
Translate before acking.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
