Commit Graph

125 Commits

Author SHA1 Message Date
Rafael J. Wysocki
5c7dd710f6 ACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold
Commit 1cc0c998fd ("ACPI: Fix D3hot v D3cold confusion") introduced a
bug in __acpi_bus_set_power() and changed the behavior of
acpi_pci_set_power_state() in such a way that it generally doesn't work
as expected if PCI_D3hot is passed to it as the second argument.

First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to
__acpi_bus_set_power() and the explicit_set flag is set for the D3cold
state, the function will try to execute AML method called "_PS4", which
doesn't exist.

Fix this by adding a check to ensure that the name of the AML method
to execute for transitions to ACPI_STATE_D3_COLD is correct in
__acpi_bus_set_power().  Also make sure that the explicit_set flag
for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify
acpi_power_transition() to avoid accessing power resources for
ACPI_STATE_D3_COLD, because they don't exist.

Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the
target state, the function will request a transition to
ACPI_STATE_D3_HOT instead of ACPI_STATE_D3.  However,
ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML
method is defined for the given device, which is rare.  This causes
problems to happen on systems where devices were successfully put
into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work
now.  In particular, some unused graphics adapters are not turned
off as a result.

To fix this issue restore the old behavior of
acpi_pci_set_power_state(), which is to request a transition to
ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or
PCI_D3cold is passed to it as the argument.

This approach is not ideal, because generally power should not
be removed from devices if PCI_D3hot is the target power state,
but since this behavior is relied on, we have no choice but to
restore it at the moment and spend more time on designing a
better solution in the future.

References: https://bugzilla.kernel.org/show_bug.cgi?id=43228
Reported-by: rocko <rockorequin@hotmail.com>
Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Reported-and-tested-by: Peter <lekensteyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-17 16:16:16 -07:00
Matthew Garrett
f2d4753fbd ACPI: export acpi_kobj
Drivers may wish to add entries to /sys/firmware/acpi, so export acpi_kobj
in order to let them do that.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 04:09:05 -04:00
Rafael J. Wysocki
4505a2015f ACPI: Drop ACPI_NO_HARDWARE_INIT
ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and
acpi_bus_init() when calling acpi_enable_subsystem(), but
acpi_enable_subsystem() doesn't check that flag, so it can be
dropped.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 20:32:31 -05:00
Len Brown
a7e09d450b ACPI: APEI build fix
as GHES is optional...

When # CONFIG_ACPI_APEI_GHES is not set:

(.init.text+0x4c22): undefined reference to `ghes_disable'

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-03 11:15:59 -04:00
Huang Ying
eccddd32ce ACPI, APEI, Add APEI bit support in generic _OSC call
In APEI firmware first mode, hardware error is reported by hardware to
firmware firstly, then firmware reports the error to Linux in a GHES
error record via POLL/SCI/IRQ/NMI etc.

This may result in some issues if OS has no full APEI support.  So
some firmware implementation will work in a back-compatible mode by
default.  Where firmware will only notify OS in old-fashion, without
GHES record.  For example, for a fatal hardware error, only NMI is
signaled, no GHES record.

To gain full APEI power on these machines, APEI bit in generic _OSC
call can be specified to tell firmware that Linux has full APEI
support.  This patch adds the APEI bit support in generic _OSC call.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 23:38:20 -04:00
Lin Ming
28c2103dad ACPI: Add D3 cold state
_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3.  If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.

Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-05-29 02:21:08 -04:00
Rafael J. Wysocki
6831c6edc7 PM: Drop pm_flags that is not necessary
The variable pm_flags is used to prevent APM from being enabled
along with ACPI, which would lead to problems.  However, acpi_init()
is always called before apm_init() and after acpi_init() has
returned, it is known whether or not ACPI will be used.  Namely, if
acpi_disabled is not set after acpi_init() has returned, this means
that ACPI is enabled.  Thus, it is sufficient to check acpi_disabled
in apm_init() to prevent APM from being enabled in parallel with
ACPI.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2011-03-15 00:43:16 +01:00
Rafael J. Wysocki
cd51e61cf4 PM / ACPI: Remove references to pm_flags from bus.c
If direct references to pm_flags are removed from drivers/acpi/bus.c,
CONFIG_ACPI will not need to depend on CONFIG_PM any more.  Make that
happen.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Len Brown <len.brown@intel.com>
2011-03-15 00:43:15 +01:00
Rafael J. Wysocki
53eac700b0 ACPI / PM: Drop acpi_power_nocheck
Since acpi_bus_set_power() should not use __acpi_bus_get_power() to
update the device's device->power.state field before changing its
power state (this may cause device->power.state to be inconsistent
with the device power resources' reference counters), remove this
call from it.  In consequence, the acpi_power_nocheck variable is not
necessary any more, so it can be dropped along with the DMI table
used for setting that variable for HP Pavilion 05.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki
f6767dcf2a ACPI / PM: Drop acpi_bus_get_power()
There are no more users of acpi_bus_get_power(), so it can be
dropped.  Moreover, it should be dropped, because it modifies
the device->power.state field of an ACPI device without updating
the reference counters of the device's power resources, which is
wrong.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki
488a76c526 ACPI / Fan: Rework the handling of power resources
Use the new function acpi_bus_update_power() for manipulating power
resources used by ACPI fan devices, which allows them to be put into
the right state during initialization and resume.  Consequently,
remove the flags.force_power_state field from struct acpi_device,
which is not necessary any more.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki
97d9a9e9f5 ACPI / PM: Register acpi_power_driver early
The ACPI device driver used for handling power resources,
acpi_power_driver, creates a struct acpi_power_resource object for
each ACPI device representing a power resource.  These objects are
then used when setting and reading the power states of devices using
the corresponding power resources.  Unfortunately, acpi_power_driver
is registered after acpi_scan_init() that may add devices using the
power resources before acpi_power_driver has a chance to create
struct acpi_power_resource objects for them (specifically, the power
resources may be referred to during the scanning process through
acpi_bus_get_power() before they have been initialized).

As the first step towards fixing this issue, move the registration
of acpi_power_driver into acpi_scan_init() so that power resource
devices can be initialized by it as soon as they have been found in
the namespace.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki
25eed40720 ACPI / PM: Add function for updating device power state consistently
Add function acpi_bus_update_power() for reading the actual power
state of an ACPI device and updating its device->power.state field
in such a way that its power resources' reference counters will
remain consistent with that field.

For this purpose introduce __acpi_bus_set_power() setting the
power state of an ACPI device without updating its
device->power.state field and make acpi_bus_set_power() and
acpi_bus_update_power() use it (acpi_bus_set_power() retains the
current behavior for now).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:45 -05:00
Rafael J. Wysocki
ade3e7fef7 ACPI / PM: Add function for device power state initialization
Add function acpi_bus_init_power() for getting the initial power
state of an ACPI device and reference counting its power resources
as appropriate.

Make acpi_bus_get_power_flags() use the new function instead of
acpi_bus_get_power() that updates device->power.state without
reference counting the device's power resources.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:44 -05:00
Rafael J. Wysocki
5e6d4fe429 ACPI / PM: Introduce __acpi_bus_get_power()
It sometimes is necessary to get the power state of an ACPI device
without updating its device->power.state field, for example to
avoid inconsistencies between device->power.state and the reference
counters of the device's power resources.  For this purpose introduce
__acpi_bus_get_power() that will return the given device's power
state via a pointer (instead of modifying device->power.state)
and make acpi_bus_get_power() use it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:44 -05:00
Rafael J. Wysocki
32a00d274e ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
acpi_power_get_inferred_state() should not update
device->power.state behind the back of its caller, so make it return
the state via a pointer instead.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-12 04:48:43 -05:00
Zhang Rui
b1d248d96c ACPI: install ACPI table handler before any dynamic tables being loaded
ACPI table sysfs I/F is broken by commit

78f1699659
Author: Alex Chiang <achiang@hp.com>
Date:   Sun Dec 20 12:19:09 2009 -0700
    ACPI: processor: call _PDC early

because dynamic SSDT tables may be loaded in _PDC,
before installing the ACPI table handler.
As a result, the sysfs I/F of these dynamic tables are
located at  /sys/firmware/acpi/tables instead of
/sys/firmware/acpi/tables/dynamic, which is not true.

Invoke acpi_sysfs_init() before acpi_early_processor_set_pdc(),
so that the table handler is installed before any dynamic tables loaded.

https://bugzilla.kernel.org/show_bug.cgi?id=21142

CC: Dennis Jansen <dennis.jansen@web.de>
CC: Alex Chiang <achiang@hp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-26 04:55:29 -04:00
Len Brown
fdb8c58a16 Merge branches 'apei', 'battery-mwh-fix', 'bugzilla-10807', 'bugzilla-14736', 'bugzilla-14679', 'bugzilla-16396', 'launchpad-613381' and 'misc' into release 2010-09-29 15:18:28 -04:00
Len Brown
100cf87788 ACPI: invoke DSDT corruption workaround on all Toshiba Satellite
Our list of Toshiba Satellite models that require this workaround
is growing -- so invoke the workaround for the entire product line.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29 14:18:59 -04:00
Lucas De Marchi
58f87ed0d4 ACPI: Fix typos
Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-28 21:38:19 -04:00
Zhang Rui
47f5c892b0 ACPI: remove deprecated ACPI procfs I/F
Rmove deprecated ACPI procfs I/F, including
/proc/acpi/debug_layer
/proc/acpi/debug_level
/proc/acpi/info
/proc/acpi/dsdt
/proc/acpi/fadt
/proc/acpi/sleep

because the sysfs I/F is already available
and has been working well for years.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 00:27:51 -04:00
Zhang Rui
1c8fce27e2 ACPI: introduce drivers/acpi/sysfs.c
Introduce drivers/acpi/sysfs.c.

code for ACPI sysfs I/F, including
#ifdef ACPI_DEBUG
/sys/module/acpi/parameters/debug_layer
/sys/module/acpi/parameters/debug_level
/sys/module/acpi/parameters/trace_method_name
/sys/module/acpi/parameters/trace_debug_layer
/sys/module/acpi/parameters/trace_debug_level
/sys/module/acpi/parameters/trace_state
#endif
/sys/module/acpi/parameters/acpica_version
/sys/firmware/acpi/tables/
/sys/firmware/acpi/interrupts/
is moved to this file.

No function change in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 00:26:30 -04:00
Zhang Rui
a25ee9200e ACPI: introduce drivers/acpi/debugfs.c
Introduce drivers/acpi/debugfs.c.

Code for ACPI debugfs I/F,
i.e. /sys/kernel/debug/acpi/custom_method,
is moved to this file.

And make ACPI debugfs always built in,
even if CONFIG_ACPI_DEBUG is cleared.

BTW:this adds about 400bytes code to ACPI, when
CONFIG_ACPI_DEBUG is cleared.

[uaccess.h build fix from Andrew Morton <akpm@linux-foundation.org>]

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-14 23:02:00 -04:00
Andy Shevchenko
965fd9e9a2 drivers: acpi: don't use own implementation of hex_to_bin()
Remove own implementation of hex_to_bin().

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:06 -07:00
Linus Torvalds
04afb40593 Merge branch 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (22 commits)
  ACPI: fix early DSDT dmi check warnings on ia64
  ACPICA: Update version to 20100428.
  ACPICA: Update/clarify some parameter names associated with acpi_handle
  ACPICA: Rename acpi_ex_system_do_suspend->acpi_ex_system_do_sleep
  ACPICA: Prevent possible allocation overrun during object copy
  ACPICA: Split large file, evgpeblk
  ACPICA: Add GPE support for dynamically loaded ACPI tables
  ACPICA: Clarify/rename some root table descriptor fields
  ACPICA: Update version to 20100331.
  ACPICA: Minimize the differences between linux GPE code and ACPICA code base
  ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT
  ACPICA: Update DSDT copy/detection.
  ACPICA: Add subsystem option to force copy of DSDT to local memory
  ACPICA: Add detection of corrupted/replaced DSDT
  ACPICA: Add write support for DataTable operation regions
  ACPICA: Fix for acpi_reallocate_root_table for incorrect root table copy
  ACPICA: Update comments/headers, no functional change
  ACPICA: Update version to 20100304
  ACPICA: Fix for possible fault in acpi_ex_release_mutex
  ACPICA: Standardize integer output for ACPICA warnings/errors
  ...
2010-05-20 09:45:38 -07:00
Lin Ming
cce4f632db ACPI: fix early DSDT dmi check warnings on ia64
WARNING: at drivers/firmware/dmi_scan.c:423 dmi_matches+0x70/0x160()
dmi check: not initialized yet.

This is caused by commit aa2110c
(ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT).
DMI is not initialized yet in acpi_early_init on ia64.

The DSDT DMI check table is x86 specific, so make it empty on other archs.
And this fixes the warnings on ia64.

Reported-and-tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19 23:56:00 -04:00
Dan Carpenter
5cc4a0f6b7 ACPI: silence kmemcheck false positive
This addresses: https://bugzilla.kernel.org/show_bug.cgi?id=14998

We copy some strings into "event" but we leave the space after the NULL
terminators uninitialized.  Later in acpi_bus_receive_event() we copy
the whole struct to another buffer with memcpy().  If the new buffer is
stored on the stack, kmemcheck prints a warning about the unitialized
space after the NULL terminators.

It's true that the space is uninitialized, but it's harmless.  The
buffer is only used in acpi_system_read_event() and we don't read past
the NULL terminators.

This patch changes the kmalloc() to kzalloc() so that we initialize the
memory and silence the kmemcheck warning.

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-27 03:15:08 -04:00
Lin Ming
aa2110cb1a ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT
Some BIOS on Toshiba machines corrupt the DSDT, so add a new
boot option acpi=copy_dsdt to workaround it.
Add warning message to ask users to use this option if corrupt DSDT detected.

Also build a DMI blacklist to check it and automatically copy DSDT.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Len Brown
ec28dcc6b4 Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release 2010-03-14 21:30:17 -04:00
Zhao Yakui
6a4e2b7503 ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes
If the BIOS pokes the system-wide OSC bits to see if Linux
supports evaluating _OST after a _PPC change notification,
answer yes.

Also, fix an oversight where we neglected to set the OSC
bit advertising processor aggregator device support
when acpi-pad is compiled as a module.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 23:05:00 -05:00
Zhang Rui
0c99c5288e ACPI: Disable explicit power state retrieval on fans
If the ACPI power state can be got both directly and indirectly,
we prefer to get it indirectly.

https://bugzilla.redhat.com/show_bug.cgi?id=531916 describes a
system with a _PSC method for the fan that always returns "on".
There's no benefit in us always requesting the state of the fan
when performing transitions - we want to do everything we can
to ensure that the fan turns on when it should do, not risk
hardware damage by believing the hardware when it tells us the
fan is already on. Given that the Leading Other OS(tm) works fine
on this machine, it seems likely that it behaves in much this way.

inspired-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-28 21:47:29 -05:00
Len Brown
309ddc53be Merge branches 'bugzilla-14446', 'bugzilla-14753' and 'bugzilla-14824' into release 2009-12-24 01:17:01 -05:00
Shaohua Li
9dc130fccb ACPI: fix OSC regression that caused aer and pciehp not to load
Executing _OSC returns a buffer, which has an acpi object in it.
Don't directly returns the buffer, instead, we return the acpi object's
buffer. This fixes a regression since caller of acpi_run_osc expects
an acpi object's buffer returned.

Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-23 17:42:07 -05:00
Alex Chiang
78f1699659 ACPI: processor: call _PDC early
We discovered that at least one machine (HP Envy), methods in the DSDT
attempt to call external methods defined in a dynamically loaded SSDT.

Unfortunately, the DSDT methods we are trying to call are part of the
EC initialization, which happens very early, and the the dynamic SSDT
is only loaded when a processor _PDC method runs much later.

This results in namespace lookup errors for the (as of yet) undefined
methods.

Since Windows doesn't have any issues with this machine, we take it
as a hint that they must be evaluating _PDC much earlier than we are.

Thus, the proper thing for Linux to do should be to match the Windows
implementation more closely.

Provide a mechanism to call _PDC before we enable the EC. Doing so loads
the dynamic tables, and allows the EC to be enabled correctly.

The ACPI processor driver will still evaluate _PDC in its .add() method
to cover the hotplug case.

Resolves: http://bugzilla.kernel.org/show_bug.cgi?id=14824

Cc: ming.m.lin@intel.com
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-22 03:24:08 -05:00
Shaohua Li
3563ff964f ACPI: Add platform-wide _OSC support.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:05:34 -05:00
Shaohua Li
70023de88c ACPI: Add a generic API for _OSC -v2
v2->v1:
.improve debug info as suggedted by Bjorn,Kenji
.API is using uuid string as suggested by Alexey

Add an API to execute _OSC. A lot of devices can have this method, so add a
generic API.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-16 14:03:30 -05:00
Bjorn Helgaas
402ac53614 ACPI: add acpi_bus_get_status_handle()
Add acpi_bus_get_status_handle() so we can get the status of a namespace
object before building a struct acpi_device.

This removes a use of "device->flags.dynamic_status", a cached indicator of
whether _STA exists.  It seems simpler and more reliable to just evaluate
_STA and catch AE_NOT_FOUND errors.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25 14:24:30 -04:00
Len Brown
d26f0528d5 Merge branch 'misc-2.6.32' into release
Conflicts:
	drivers/pci/dmar.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 02:14:45 -04:00
Len Brown
eb27cae8ad ACPI: linux/acpi.h should not include linux/dmi.h
users of acpi.h that need dmi.h should include it directly.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-19 01:33:27 -04:00
Bob Moore
8e4319c425 ACPICA: Fix several acpi_attach_data problems
Handler was never invoked. Now invoked if/when host node is deleted.
Data object was not automatically deleted when host node was deleted.
Interface to handler had an unused parameter, removed it.
ACPICA BZ 778.

http://acpica.org/bugzilla/show_bug.cgi?id=778

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27 10:17:19 -04:00
Bjorn Helgaas
ff754e2e85 ACPI: use handle, not device, in system notification path
This patch changes the global system notification path so it uses the
acpi_handle, not the acpi_device.

System notifications often deal with device presence and status change.
In these cases, we may not have an acpi_device.  For example, we may
get a Device Check notification on an object that previously was not
present.  Since the object was not present, we would not have had an
acpi_device for it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas
cdd5b8ca12 ACPI: remove unused return values from Bus Check & Device Check handling
Remove return values from acpi_bus_check_device() and acpi_bus_check_scope()
since nobody looks at them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas
aa8a149c0c ACPI: remove unused "status_changed" return value from Check Device handling
Remove "status_changed" return from acpi_bus_check_device().  Nobody
does anything useful based on its value.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas
02c37bd8d0 ACPI: simplify notification debug messages
This replaces several messages that depend on the acpi_device struct
with a single message that uses just the acpi_handle.  We should be
able to deal with notifications to objects that do not yet have an
acpi_device struct.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:15 -04:00
Bjorn Helgaas
6d27813100 ACPI: allow drivers to request both device and system notify events
System notify events (0x00-0x7f) are common across all device types
and should be handled in Linux/ACPI, not in drivers.  However, some
BIOSes use system notify events in device-specific ways that require
the driver to be involved.

This patch adds a ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag.  When a
driver sets this flag and supplies a .notify method, Linux/ACPI calls
the .notify method for ALL notify events on the device, not just the
device-specific (0x80-0xff) events.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-18 00:13:14 -04:00
Len Brown
ddc50b6ad6 ACPI: power: update error message
"Transitioning device [%s] to D%d" is not correct.
We print this line when we attempted to transition
the device, and it failed.

So instead, print
"Device [%s] failed to transition to D%d\n"

This can happen under two conditions:

1. acpi_power_transition() fails when trying to handle the
   _ON/_OFF for associated power resource.

2. acpi_evaluate_object() on the explicit _PS0/_PS3
   for that actual device could fail.

this change clarifies, but doesn't fix
http://bugzilla.kernel.org/show_bug.cgi?id=13243

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-08 00:07:30 -04:00
Len Brown
9a38f4eec5 Merge branch 'bjorn-initcall-cleanup' into release 2009-04-05 01:38:31 -04:00
Bjorn Helgaas
201b8c655f ACPI: call acpi_wakeup_device_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_wakeup_device_init() directly.
Previously, acpi_wakeup_device_init() was a late_initcall (sequence 7).

acpi_wakeup_device_init() depends on acpi_wakeup_device_list, which
is populated when ACPI devices are enumerated by acpi_init() ->
acpi_scan_init().  Using late_initcall is certainly enough to make
sure acpi_wakeup_device_list is populated, but it is more than
necessary.  We can just as easily call acpi_wakeup_device_init()
directly from acpi_init(), which avoids the initcall magic.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:31 -04:00
Bjorn Helgaas
9cee43e079 ACPI: call acpi_sleep_proc_init() explicitly rather than as initcall
This patch makes acpi_init() call acpi_sleep_proc_init() directly.
Previously, acpi_sleep_proc_init() was a late_initcall (sequence 7),
apparently to make sure that the /proc hierarchy already exists:

    2003/02/13 12:38:03-06:00 mochel
    acpi sleep: demote sleep proc file creation.

    - Make acpi_sleep_proc_init() a late_initcall(), and not called from
      acpi_sleep_init(). This guarantees that the acpi proc hierarchy is at
      least there when we create the dang file.

This should no longer be an issue because acpi_bus_init() (called early
in acpi_init()) creates acpi_root_dir (/proc/acpi).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:23 -04:00