Commit Graph

6511 Commits

Author SHA1 Message Date
David Rientjes
215ba78115 mm, selftests: test return value of munmap for MAP_HUGETLB memory
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned,
otherwise it fails with -EINVAL.

All tests currently behave correctly, but it's better to explcitly test
the return value for completeness and document the requirement, especially
if users copy map_hugetlb.c as a sample implementation.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Eric B Munson <emunson@akamai.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:19 -07:00
Linus Torvalds
6c373ca893 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add BQL support to via-rhine, from Tino Reichardt.

 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
    can support hw switch offloading.  From Floria Fainelli.

 3) Allow 'ip address' commands to initiate multicast group join/leave,
    from Madhu Challa.

 4) Many ipv4 FIB lookup optimizations from Alexander Duyck.

 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
    Borkmann.

 6) Remove the ugly compat support in ARP for ugly layers like ax25,
    rose, etc.  And use this to clean up the neigh layer, then use it to
    implement MPLS support.  All from Eric Biederman.

 7) Support L3 forwarding offloading in switches, from Scott Feldman.

 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
    up route lookups even further.  From Alexander Duyck.

 9) Many improvements and bug fixes to the rhashtable implementation,
    from Herbert Xu and Thomas Graf.  In particular, in the case where
    an rhashtable user bulk adds a large number of items into an empty
    table, we expand the table much more sanely.

10) Don't make the tcp_metrics hash table per-namespace, from Eric
    Biederman.

11) Extend EBPF to access SKB fields, from Alexei Starovoitov.

12) Split out new connection request sockets so that they can be
    established in the main hash table.  Much less false sharing since
    hash lookups go direct to the request sockets instead of having to
    go first to the listener then to the request socks hashed
    underneath.  From Eric Dumazet.

13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.

14) Support stable privacy address generation for RFC7217 in IPV6.  From
    Hannes Frederic Sowa.

15) Hash network namespace into IP frag IDs, also from Hannes Frederic
    Sowa.

16) Convert PTP get/set methods to use 64-bit time, from Richard
    Cochran.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
  fm10k: Bump driver version to 0.15.2
  fm10k: corrected VF multicast update
  fm10k: mbx_update_max_size does not drop all oversized messages
  fm10k: reset head instead of calling update_max_size
  fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
  fm10k: update xcast mode before synchronizing multicast addresses
  fm10k: start service timer on probe
  fm10k: fix function header comment
  fm10k: comment next_vf_mbx flow
  fm10k: don't handle mailbox events in iov_event path and always process mailbox
  fm10k: use separate workqueue for fm10k driver
  fm10k: Set PF queues to unlimited bandwidth during virtualization
  fm10k: expose tx_timeout_count as an ethtool stat
  fm10k: only increment tx_timeout_count in Tx hang path
  fm10k: remove extraneous "Reset interface" message
  fm10k: separate PF only stats so that VF does not display them
  fm10k: use hw->mac.max_queues for stats
  fm10k: only show actual queues, not the maximum in hardware
  fm10k: allow creation of VLAN on default vid
  fm10k: fix unused warnings
  ...
2015-04-15 09:00:47 -07:00
Linus Torvalds
6c8a53c9e6 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Core kernel changes:

   - One of the more interesting features in this cycle is the ability
     to attach eBPF programs (user-defined, sandboxed bytecode executed
     by the kernel) to kprobes.

     This allows user-defined instrumentation on a live kernel image
     that can never crash, hang or interfere with the kernel negatively.
     (Right now it's limited to root-only, but in the future we might
     allow unprivileged use as well.)

     (Alexei Starovoitov)

   - Another non-trivial feature is per event clockid support: this
     allows, amongst other things, the selection of different clock
     sources for event timestamps traced via perf.

     This feature is sought by people who'd like to merge perf generated
     events with external events that were measured with different
     clocks:

       - cluster wide profiling

       - for system wide tracing with user-space events,

       - JIT profiling events

     etc.  Matching perf tooling support is added as well, available via
     the -k, --clockid <clockid> parameter to perf record et al.

     (Peter Zijlstra)

  Hardware enablement kernel changes:

   - x86 Intel Processor Trace (PT) support: which is a hardware tracer
     on steroids, available on Broadwell CPUs.

     The hardware trace stream is directly output into the user-space
     ring-buffer, using the 'AUX' data format extension that was added
     to the perf core to support hardware constraints such as the
     necessity to have the tracing buffer physically contiguous.

     This patch-set was developed for two years and this is the result.
     A simple way to make use of this is to use BTS tracing, the PT
     driver emulates BTS output - available via the 'intel_bts' PMU.
     More explicit PT specific tooling support is in the works as well -
     will probably be ready by 4.2.

     (Alexander Shishkin, Peter Zijlstra)

   - x86 Intel Cache QoS Monitoring (CQM) support: this is a hardware
     feature of Intel Xeon CPUs that allows the measurement and
     allocation/partitioning of caches to individual workloads.

     These kernel changes expose the measurement side as a new PMU
     driver, which exposes various QoS related PMU events.  (The
     partitioning change is work in progress and is planned to be merged
     as a cgroup extension.)

     (Matt Fleming, Peter Zijlstra; CPU feature detection by Peter P
     Waskiewicz Jr)

   - x86 Intel Haswell LBR call stack support: this is a new Haswell
     feature that allows the hardware recording of call chains, plus
     tooling support.  To activate this feature you have to enable it
     via the new 'lbr' call-graph recording option:

        perf record --call-graph lbr
        perf report

     or:

        perf top --call-graph lbr

     This hardware feature is a lot faster than stack walk or dwarf
     based unwinding, but has some limitations:

       - It reuses the current LBR facility, so LBR call stack and
         branch record can not be enabled at the same time.

       - It is only available for user-space callchains.

     (Yan, Zheng)

   - x86 Intel Broadwell CPU support and various event constraints and
     event table fixes for earlier models.

     (Andi Kleen)

   - x86 Intel HT CPUs event scheduling workarounds.  This is a complex
     CPU bug affecting the SNB,IVB,HSW families that results in counter
     value corruption.  The mitigation code is automatically enabled and
     is transparent.

     (Maria Dimakopoulou, Stephane Eranian)

  The perf tooling side had a ton of changes in this cycle as well, so
  I'm only able to list the user visible changes here, in addition to
  the tooling changes outlined above:

  User visible changes affecting all tools:

      - Improve support of compressed kernel modules (Jiri Olsa)
      - Save DSO loading errno to better report errors (Arnaldo Carvalho de Melo)
      - Bash completion for subcommands (Yunlong Song)
      - Add 'I' event modifier for perf_event_attr.exclude_idle bit (Jiri Olsa)
      - Support missing -f to override perf.data file ownership. (Yunlong Song)
      - Show the first event with an invalid filter (David Ahern, Arnaldo Carvalho de Melo)

  User visible changes in individual tools:

    'perf data':

        New tool for converting perf.data to other formats, initially
        for the CTF (Common Trace Format) from LTTng (Jiri Olsa,
        Sebastian Siewior)

    'perf diff':

        Add --kallsyms option (David Ahern)

    'perf list':

        Allow listing events with 'tracepoint' prefix (Yunlong Song)

        Sort the output of the command (Yunlong Song)

    'perf kmem':

        Respect -i option (Jiri Olsa)

        Print big numbers using thousands' group (Namhyung Kim)

        Allow -v option (Namhyung Kim)

        Fix alignment of slab result table (Namhyung Kim)

    'perf probe':

        Support multiple probes on different binaries on the same command line (Masami Hiramatsu)

        Support unnamed union/structure members data collection. (Masami Hiramatsu)

        Check kprobes blacklist when adding new events. (Masami Hiramatsu)

    'perf record':

        Teach 'perf record' about perf_event_attr.clockid (Peter Zijlstra)

        Support recording running/enabled time (Andi Kleen)

    'perf sched':

        Improve the performance of 'perf sched replay' on high CPU core count machines (Yunlong Song)

    'perf report' and 'perf top':

        Allow annotating entries in callchains in the hists browser (Arnaldo Carvalho de Melo)

        Indicate which callchain entries are annotated in the
        TUI hists browser (Arnaldo Carvalho de Melo)

        Add pid/tid filtering to 'report' and 'script' commands (David Ahern)

        Consider PERF_RECORD_ events with cpumode == 0 in 'perf top', removing one
        cause of long term memory usage buildup, i.e. not processing PERF_RECORD_EXIT
        events (Arnaldo Carvalho de Melo)

    'perf stat':

        Report unsupported events properly (Suzuki K. Poulose)

        Output running time and run/enabled ratio in CSV mode (Andi Kleen)

    'perf trace':

        Handle legacy syscalls tracepoints (David Ahern, Arnaldo Carvalho de Melo)

        Only insert blank duration bracket when tracing syscalls (Arnaldo Carvalho de Melo)

        Filter out the trace pid when no threads are specified (Arnaldo Carvalho de Melo)

        Dump stack on segfaults (Arnaldo Carvalho de Melo)

        No need to explicitely enable evsels for workload started from perf, let it
        be enabled via perf_event_attr.enable_on_exec, removing some events that take
        place in the 'perf trace' before a workload is really started by it.
        (Arnaldo Carvalho de Melo)

        Allow mixing with tracepoints and suppressing plain syscalls. (Arnaldo Carvalho de Melo)

  There's also been a ton of infrastructure work done, such as the
  split-out of perf's build system into tools/build/ and other changes -
  see the shortlog and changelog for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (358 commits)
  perf/x86/intel/pt: Clean up the control flow in pt_pmu_hw_init()
  perf evlist: Fix type for references to data_head/tail
  perf probe: Check the orphaned -x option
  perf probe: Support multiple probes on different binaries
  perf buildid-list: Fix segfault when show DSOs with hits
  perf tools: Fix cross-endian analysis
  perf tools: Fix error path to do closedir() when synthesizing threads
  perf tools: Fix synthesizing fork_event.ppid for non-main thread
  perf tools: Add 'I' event modifier for exclude_idle bit
  perf report: Don't call map__kmap if map is NULL.
  perf tests: Fix attr tests
  perf probe: Fix ARM 32 building error
  perf tools: Merge all perf_event_attr print functions
  perf record: Add clockid parameter
  perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10
  perf sched replay: Support using -f to override perf.data file ownership
  perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
  perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
  perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
  perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations
  ...
2015-04-14 14:37:47 -07:00
Linus Torvalds
078838d565 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
 "The main changes in this cycle were:

   - changes permitting use of call_rcu() and friends very early in
     boot, for example, before rcu_init() is invoked.

   - add in-kernel API to enable and disable expediting of normal RCU
     grace periods.

   - improve RCU's handling of (hotplug-) outgoing CPUs.

   - NO_HZ_FULL_SYSIDLE fixes.

   - tiny-RCU updates to make it more tiny.

   - documentation updates.

   - miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
  cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
  cpu: Defer smpboot kthread unparking until CPU known to scheduler
  rcu: Associate quiescent-state reports with grace period
  rcu: Yet another fix for preemption and CPU hotplug
  rcu: Add diagnostics to grace-period cleanup
  rcutorture: Default to grace-period-initialization delays
  rcu: Handle outgoing CPUs on exit from idle loop
  cpu: Make CPU-offline idle-loop transition point more precise
  rcu: Eliminate ->onoff_mutex from rcu_node structure
  rcu: Process offlining and onlining only at grace-period start
  rcu: Move rcu_report_unblock_qs_rnp() to common code
  rcu: Rework preemptible expedited bitmask handling
  rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
  rcutorture: Enable slow grace-period initializations
  rcu: Provide diagnostic option to slow down grace-period initialization
  rcu: Detect stalls caused by failure to propagate up rcu_node tree
  rcu: Eliminate empty HOTPLUG_CPU ifdef
  rcu: Simplify sync_rcu_preempt_exp_init()
  rcu: Put all orphan-callback-related code under same comment
  rcu: Consolidate offline-CPU callback initialization
  ...
2015-04-14 13:36:04 -07:00
Linus Torvalds
eeee78cf77 Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
 
 Tracepoints have helper functions for the TP_printk() called
 __print_symbolic() and __print_flags() that lets a numeric number be
 displayed as a a human comprehensible text. What is placed in the
 TP_printk() is also shown in the tracepoint format file such that
 user space tools like perf and trace-cmd can parse the binary data
 and express the values too. Unfortunately, the way the TRACE_EVENT()
 macro works, anything placed in the TP_printk() will be shown pretty
 much exactly as is. The problem arises when enums are used. That's
 because unlike macros, enums will not be changed into their values
 by the C pre-processor. Thus, the enum string is exported to the
 format file, and this makes it useless for user space tools.
 
 The TRACE_DEFINE_ENUM() solves this by converting the enum strings
 in the TP_printk() format into their number, and that is what is
 shown to user space. For example, the tracepoint tlb_flush currently
 has this in its format file:
 
      __print_symbolic(REC->reason,
         { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
         { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
         { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
         { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
 
 After adding:
 
      TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
      TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
 
 Its format file will contain this:
 
      __print_symbolic(REC->reason,
         { 0, "flush on task switch" },
         { 1, "remote shootdown" },
         { 2, "local shootdown" },
         { 3, "local mm shootdown" })
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
 wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
 y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
 dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
 aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
 JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
 =Ixwt
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...
2015-04-14 10:49:03 -07:00
Linus Torvalds
d0bbe0dd35 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Usual trivial tree updates.  Nothing outstanding -- mostly printk()
  and comment fixes and unused identifier removals"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  goldfish: goldfish_tty_probe() is not using 'i' any more
  powerpc: Fix comment in smu.h
  qla2xxx: Fix printks in ql_log message
  lib: correct link to the original source for div64_u64
  si2168, tda10071, m88ds3103: Fix firmware wording
  usb: storage: Fix printk in isd200_log_config()
  qla2xxx: Fix printk in qla25xx_setup_mode
  init/main: fix reset_device comment
  ipwireless: missing assignment
  goldfish: remove unreachable line of code
  coredump: Fix do_coredump() comment
  stacktrace.h: remove duplicate declaration task_struct
  smpboot.h: Remove unused function prototype
  treewide: Fix typo in printk messages
  treewide: Fix typo in printk messages
  mod_devicetable: fix comment for match_flags
2015-04-14 09:50:27 -07:00
Linus Torvalds
b79013b244 Staging driver patches for 4.1-rc1
Here's the big staging driver patchset for 4.1-rc1.
 
 There's a lot of patches here, the Outreachy application period happened
 during this development cycle, so that means that there was a lot of
 cleanup patches accepted.  Other than the normal coding style and sparse
 fixes here, there are some driver updates and work toward making some of
 the drivers into "mergable" shape (like the Unisys drivers.)
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlUsIA0ACgkQMUfUDdst+ylHuACgm8QZ9S6lk45/Qd9YeR3NSDaS
 upoAn3gVAaHnuxkW3anivuwOcirgCp3l
 =7VHU
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here's the big staging driver patchset for 4.1-rc1.

  There's a lot of patches here, the Outreachy application period
  happened during this development cycle, so that means that there was a
  lot of cleanup patches accepted.  Other than the normal coding style
  and sparse fixes here, there are some driver updates and work toward
  making some of the drivers into "mergable" shape (like the Unisys
  drivers.)

  All of these have been in linux-next for a while"

* tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits)
  staging: lustre: orthography & coding style
  staging: lustre: lnet: lnet: fix error return code
  staging: lustre: fix sparse warning
  Revert "Staging: sm750fb: Fix C99 Comments"
  Staging: rtl8192u: use correct array for debug output
  staging: rtl8192e: Remove dead code
  staging: rtl8192e: Comment cleanup (style/format)
  staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp()
  staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp()
  staging: rtl8192e: Divide rtllib_rx_auth()
  staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings
  staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning
  staging: rtl8192e: Fix BRACES warning
  staging: rtl8192e: Fix LINE_CONTINUATIONS warning
  staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings
  staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro
  staging: rtl8192e: Fix RETURN_VOID warnings
  staging: rtl8192e: Fix UNNECESSARY_ELSE warning
  staging: rtl8723au: Remove unneeded comments
  staging: rtl8723au: Use __func__ in trace logs
  ...
2015-04-13 17:37:33 -07:00
Linus Torvalds
60f898eeaa Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
 "There were lots of changes in this development cycle:

   - over 100 separate cleanups, restructuring changes, speedups and
     fixes in the x86 system call, irq, trap and other entry code, part
     of a heroic effort to deobfuscate a decade old spaghetti asm code
     and its C code dependencies (Denys Vlasenko, Andy Lutomirski)

   - alternatives code fixes and enhancements (Borislav Petkov)

   - simplifications and cleanups to the compat code (Brian Gerst)

   - signal handling fixes and new x86 testcases (Andy Lutomirski)

   - various other fixes and cleanups

  By their nature many of these changes are risky - we tried to test
  them well on many different x86 systems (there are no known
  regressions), and they are split up finely to help bisection - but
  there's still a fair bit of residual risk left so caveat emptor"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits)
  perf/x86/64: Report regs_user->ax too in get_regs_user()
  perf/x86/64: Simplify regs_user->abi setting code in get_regs_user()
  perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user()
  perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user()
  x86/asm/entry/32: Tidy up JNZ instructions after TESTs
  x86/asm/entry/64: Reduce padding in execve stubs
  x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork
  x86/asm/entry/64: Simplify jumps in ret_from_fork
  x86/asm/entry/64: Remove a redundant jump
  x86/asm/entry/64: Optimize [v]fork/clone stubs
  x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too
  x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()
  x86/asm/entry/64: Use common code for rt_sigreturn() epilogue
  x86/asm/entry/64: Add forgotten CFI annotation
  x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout
  x86/asm/entry/64: Move opportunistic sysret code to syscall code path
  x86, selftests: Add sigreturn selftest
  x86/alternatives: Guard NOPs optimization
  x86/asm/entry: Clear EXTRA_REGS for all executable formats
  x86/signal: Remove pax argument from restore_sigcontext
  ...
2015-04-13 13:16:36 -07:00
Linus Torvalds
4541fec310 linux-kselftest-4.1-rc1
This update adds install and packaging tools developed on top
 of back-end shared logic enhancemnets to run and install tests.
 In addition several timer tests are added.
 
 - New timer tests from John Stultz
 - rtc test from Prarit Bhargava
 - Enhancements to un and install tests from Michael Ellerman
 - Install and packaging tools from Shuah Khan
 - Cross-compilation enablement from Tyler Baker
 - A couple of bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVIuw/AAoJEAsCRMQNDUMcO5gP/RlKsICYrG8R26cifiDJn7G0
 loSNuZ7f1oGiXtAw/MjCCUI9bxS9c6Y7z03FsgsztU6BN3xy2N0y1dsy29ix8Vc5
 uOak3Gl9fVg+cVMu6nTuDMMesBXpRCP9Wy+bmS2yBl8iTYETzagjLpMxCXcNbkll
 JSx78+09KE3H7HflCl2mK9HjmIfmZzu5TDCzYgwZHn6BC9atZBpJDNfD+mGDJSBo
 B+UMeR9rGV25axELky5Ul4N9f6Gssw4sEYMLx+UwyRE27kvL4q3jKMpIPgqtmYJh
 T1Ob09XaCEpiUF9eTdWoQWQT3AXVJTExPBmAfMqgv+znoEmx82xccqe8kWmbDiUP
 rcwfCBUYk5fS2UXc1L6fa5aBMtJUaFb9KBhbcTJNWAtMc5YYOOpTiQmEKaE2Rc6n
 5aRf2sEc9T1DG52BKde7Vg9GaAuzHgkomJDJeu4NtYJgoNuDyYnrQcGs13Xe+4DK
 u3hpiu3fz/0Pt+sX9hIMVaUbGwO6TticyEHNtkAdinRSjTcOVg6oYWh1WrWTcOPp
 Z0PH0ysdKF7nPk78uLqaSz9b20IwivyEaLVwczc1OkPoTjsrbm+3IP/oqepmhK+C
 S0+oVL4BWHHSyK6Lls7maXCy0D356GT6AaIKyzpJ2f36QhIjaTVX8RPZ2l6dC6h0
 ieZZQYW4ALd+6qmfzPxe
 =M1zT
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This is a milestone update in a sense.  Several new tests and install
  and packaging support is added in this update.

  This update adds install and packaging tools developed on top of
  back-end shared logic enhancemnets to run and install tests.  In
  addition several timer tests are added.

   - New timer tests from John Stultz

   - rtc test from Prarit Bhargava

   - Enhancements to un and install tests from Michael Ellerman

   - Install and packaging tools from Shuah Khan

   - Cross-compilation enablement from Tyler Baker

   - A couple of bug fixes"

* tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (42 commits)
  ftracetest: Do not use usleep directly
  selftest/mqueue: enable cross compilation
  selftest/ipc: enable cross compilation
  selftest/memfd: include default header install path
  selftest/mount: enable cross compilation
  selftest/memfd: enable cross compilation
  kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARM
  selftests: Change memory on-off-test.sh name to be unique
  selftests: change cpu on-off-test.sh name to be unique
  selftests/mount: Make git ignore all binaries in mount test suite
  kselftests: timers: Reduce default runtime on inconsistency-check and set-timer-lat
  ftracetest: Convert exit -1 to exit $FAIL
  ftracetest: Cope properly with stack tracer not being enabled
  tools, update rtctest.c to verify passage of time
  Documentation, split up rtc.txt into documentation and test file
  selftests: Add tool to generate kselftest tar archive
  selftests: Add kselftest install tool
  selftests: Set CC using CROSS_COMPILE once in lib.mk
  selftests: Add install support for the powerpc tests
  selftests/timers: Use shared logic to run and install tests
  ...
2015-04-13 08:59:21 -07:00
David Ahern
7b8283b56d perf evlist: Fix type for references to data_head/tail
The data_head and data_tail fields are defined as __u64 in
linux/perf_event.h, but perf userspace uses int and unsigned int.

Convert all references to u64 for consistency.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428420037-26599-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 11:29:20 -03:00
Masami Hiramatsu
8cb0aa4c2d perf probe: Check the orphaned -x option
To avoid probing in unintended binary, the orphaned -x option must be
checked and warned.

Without this patch, following command sets up the probe in the kernel.

  -----
  # perf probe -a strcpy -x ./perf
  Added new event:
    probe:strcpy         (on strcpy)

  You can now use it in all perf tools, such as:

          perf record -e probe:strcpy -aR sleep 1
  -----

But in this case, it seems that the user may want to probe in the perf
binary. With this patch, perf-probe correctly handles the orphaned -x.

  -----
  # perf probe -a strcpy -x ./perf
    Error: -x/-m must follow the probe definitions.
  ...
  -----

Reported-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150401102541.17137.75477.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:21:30 -03:00
Masami Hiramatsu
7afb3fab39 perf probe: Support multiple probes on different binaries
Support multiple probes on different binaries with just
one command.

In the result, this example sets up the probes on icmp_rcv in
kernel, on main and set_target in perf, and on pcspkr_event
in pcspker.ko driver.
  -----
  # perf probe -a icmp_rcv -x ./perf -a main -a set_target \
   -m /lib/modules/4.0.0-rc5+/kernel/drivers/input/misc/pcspkr.ko \
   -a pcspkr_event
  Added new event:
    probe:icmp_rcv       (on icmp_rcv)

  You can now use it in all perf tools, such as:

          perf record -e probe:icmp_rcv -aR sleep 1

  Added new event:
    probe_perf:main      (on main in /home/mhiramat/ksrc/linux-3/tools/perf/perf)

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:main -aR sleep 1

  Added new event:
    probe_perf:set_target (on set_target in /home/mhiramat/ksrc/linux-3/tools/perf/perf)

  You can now use it in all perf tools, such as:

          perf record -e probe_perf:set_target -aR sleep 1

  Added new event:
    probe:pcspkr_event   (on pcspkr_event in pcspkr)

  You can now use it in all perf tools, such as:

          perf record -e probe:pcspkr_event -aR sleep 1
  -----

Reported-by: Arnaldo Carvalho de Melo <acme@infradead.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150401102539.17137.46454.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:19:53 -03:00
He Kuang
5e78c69b72 perf buildid-list: Fix segfault when show DSOs with hits
commit: f3b623b849 ("perf tools: Reference count struct thread")
appends every thread->node to dead_threads in machine__remove_thread()
and list_del_init() this node in thread__put().

perf_event__exit_del_thread() releases thread wihout using
machine__remove_thread(), and causes a NULL pointer crash when
list_del_init(&thread->node) is called. Fix this by using
machine_remove_thread() instead of using thread__put() directly.

This problem can be reproduced as following:

  $ perf record ls
  $ perf buildid-list --with-hits
  [ 3874.195070] perf[1018]: segfault at 0 ip 00000000004b0b15 sp
  00007ffc35b44780 error 6 in perf[400000+166000]
  Segmentation fault

After this patch:
  $ perf record ls
  $ perf buildid-list --with-hits
  bc23e7c3281e542650ba4324421d6acf78f4c23e /proc/kcore
  643324cb0e969f30c56d660f167f84a150845511 [vdso]
  0000000000000000000000000000000000000000 /bin/busybox
  ...

Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428658500-6483-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:13:59 -03:00
David Ahern
1060ab857f perf tools: Fix cross-endian analysis
Trying to analyze a big endian data file on little endian system fails
with the error:

  0xa9b40 [0x70]: failed to process type: 9

The problem is that header parsing is not done correctly because the
file attributes are not swapped. Make it so. With this patch able to
analyze a sparc64 data file on x86_64.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1428610546-178789-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:13:58 -03:00
Arnaldo Carvalho de Melo
d998b73259 perf tools: Fix error path to do closedir() when synthesizing threads
When traversing /proc to synthesize the PERF_RECORD_FORK et al events we
were bailing out on errors without calling closedir(), fix it.

Reported-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vxtp593rfztgbi8noy0m967p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:13:58 -03:00
David Ahern
7764a385f6 perf tools: Fix synthesizing fork_event.ppid for non-main thread
Commit ca6c41c59b sets the ppid based on what is read from the
/proc/pid/status file when synthesizing fork events.

This is correct thing to do for new processes but not threads of a
process.

Fix ppid for threads to be the main thread when synthesizing fork events
(ie., assume main thread spawned all sub-threads in a process).

Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: David Ahern <david.ahern@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1428598107-178999-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-10 10:10:55 -03:00
Jiri Olsa
a1e12da479 perf tools: Add 'I' event modifier for exclude_idle bit
Adding 'I' event modifier to have complete set of modifiers for
perf_event_attr:exclude_* bits.

Any event specified with 'I' modifier will have the
perf_event_attr:exclude_idle bit set.

  $ perf record -e cycles:I -vv ls 2>&1 | grep exclude_idle
  exclude_hv          0    exclude_idle        1

Adding automated tests.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1428441919-23099-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 11:00:16 -03:00
Wang Nan
f6fcc1433a perf report: Don't call map__kmap if map is NULL.
report__warn_kptr_restrict() calls map__kmap(kernel_map) before checking
kernel_map againest NULL.

Which is dangerous, since map__kmap() will return a invalid and not NULL
address.

It will trigger a warning message in map__kmap() after the patch "perf:
kmaps: enforce usage of kmaps to protect futher bugs." was applied.

This patch fixes it by adding the missing checking.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1428490772-135393-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 11:00:00 -03:00
Jiri Olsa
54a50f93eb perf tests: Fix attr tests
Following commit:
  1a59413124 perf: Add wakeup watermark control to the AUX area

enlarged perf_event_attr, but did not updated attr tests.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/n/20150407171715.GA22603@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 10:49:53 -03:00
Wang Nan
f6c15621f0 perf probe: Fix ARM 32 building error
Commit 9b118acae3 ("perf probe: Fix to
handle aliased symbols in glibc") uses an absolute format '%lx' to
print u64 argument, which causes compiling error on ARM 32.

This patch replaces it with PRIx64.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1428459274-138470-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 10:49:48 -03:00
Peter Zijlstra
2c5e8c52c6 perf tools: Merge all perf_event_attr print functions
Currently there's 3 (that I found) different and incomplete
implementations of printing perf_event_attr.

This is quite silly. Merge the lot.

While this patch does not retain the exact form all printing that I
found is debug output and thus it should not be critical.

Also, I cannot find a single print_event_desc() caller.

Pre:

 $ perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  type                0
  size                104
  config              0
  sample_period       4000
  sample_freq         4000
  sample_type         0x107
  read_format         0
  disabled            1    inherit             1
  pinned              0    exclusive           0
  exclude_user        0    exclude_kernel      0
  exclude_hv          0    exclude_idle        0
  mmap                1    comm                1
  mmap2               1    comm_exec           1
  freq                1    inherit_stat        0
  enable_on_exec      1    task                1
  watermark           0    precise_ip          0
  mmap_data           0    sample_id_all       1
  exclude_host        0    exclude_guest       1
  excl.callchain_kern 0    excl.callchain_user 0
  wakeup_events       0
  wakeup_watermark    0
  bp_type             0
  bp_addr             0
  config1             0
  bp_len              0
  config2             0
  branch_sample_type  0
  sample_regs_user    0
  sample_stack_user   0
  sample_regs_intr    0
 ------------------------------------------------------------

 $ perf evlist  -vv
 cycles: sample_freq=4000, size: 104, sample_type: IP|TID|TIME|PERIOD,
 disabled: 1, inherit: 1, mmap: 1, mmap2: 1, comm: 1, comm_exec: 1,
 freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1

 Post:

 $ ./perf record -vv -e cycles -- sleep 1
 ------------------------------------------------------------
 perf_event_attr:
  size                             112
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|PERIOD
  disabled                         1
  inherit                          1
  mmap                             1
  comm                             1
  freq                             1
  enable_on_exec                   1
  task                             1
  sample_id_all                    1
  exclude_guest                    1
  mmap2                            1
  comm_exec                        1
------------------------------------------------------------

 $ ./perf evlist  -vv
 cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
 IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq:
 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1,
 mmap2: 1, comm_exec: 1

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150407091150.644238729@infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 10:06:28 -03:00
Peter Zijlstra
814c8c38e1 perf record: Add clockid parameter
Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.

Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
  Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 10:04:55 -03:00
Yunlong Song
ff5f3bbd40 perf sched replay: Use replay_repeat to calculate the runavg of cpu usage instead of the default value 10
Since sched->replay_repeat is set to 10 as default, the sched->run_avg,
sched->runavg_cpu_usage, and sched->runavg_parent_cpu_usage all use
10 to calculate their value.

However, the replay_repeat can be changed to other value by using -r
option, so the calculation above should use replay_repeat to achieve
more accurate results instead of the default value 10.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:27 -03:00
Yunlong Song
f0dd330fdf perf sched replay: Support using -f to override perf.data file ownership
Enable to use perf.data when it is not owned by current user or root.

Example:

 $ ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 5321918 Mar 25 15:14 perf.data
 $ sudo id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 $ sudo perf sched replay -f
 run measurement overhead: 98 nsecs
 sleep measurement overhead: 52909 nsecs
 the run test took 1000015 nsecs
 the sleep test took 1054253 nsecs
 File perf.data not owned by current user or root (use -f to override)

As shown above, the -f option does not work at all.

After this patch:

 $ sudo perf sched replay -f
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 40514 nsecs
 the run test took 1000003 nsecs
 the sleep test took 1056098 nsecs
 nr_run_events:        10
 nr_sleep_events:      1562
 nr_wakeup_events:     5
 task      0 (                  :1:         1), nr_events: 1
 task      1 (                  :2:         2), nr_events: 1
 task      2 (                  :3:         3), nr_events: 1
 ...
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 ------------------------------------------------------------
 #1  : 50.198, ravg: 50.20, cpu: 2335.18 / 2335.18
 #2  : 219.099, ravg: 67.09, cpu: 2835.11 / 2385.17
 #3  : 238.626, ravg: 84.24, cpu: 3278.26 / 2474.48
 #4  : 200.364, ravg: 95.85, cpu: 2977.41 / 2524.77
 #5  : 176.882, ravg: 103.96, cpu: 2801.35 / 2552.43
 #6  : 191.093, ravg: 112.67, cpu: 2813.70 / 2578.56
 #7  : 189.448, ravg: 120.35, cpu: 2809.21 / 2601.62
 #8  : 200.637, ravg: 128.38, cpu: 2849.91 / 2626.45
 #9  : 248.338, ravg: 140.37, cpu: 4380.61 / 2801.87
 #10 : 511.139, ravg: 177.45, cpu: 3077.73 / 2829.45

As shown above, the -f option really works now.

Besides for replay, -f option can also work for latency and map.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:26 -03:00
Yunlong Song
939cda521a perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.

Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.

And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.

That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.

This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.

For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.

That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.

As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.

Example:

Test environment: x86_64 with 160 cores

 $ cat /proc/sys/kernel/pid_max
 163840
 $ cat /proc/sys/fs/file-max
 6815744
 $ ulimit -Sn
 1024
 $ ulimit -Hn
 4096

Before this patch:

 $ perf sched replay
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 Error: sys_perf_event_open() syscall returned with -1 (Too many open
 files)

After this patch:

 $ perf sched replay
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 Error: sys_perf_event_open() syscall returned with -1 (Too many open
 files)
 Have a try with -f option

 $ perf sched replay -f
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 ------------------------------------------------------------
 #1  : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
 #2  : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
 #3  : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
 #4  : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
 #5  : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
 #6  : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
 #7  : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
 #8  : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
 #9  : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
 #10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:26 -03:00
Yunlong Song
1aff59be53 perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
Since there is sem_wait for each task in the wait_for_tasks(), e.g.
sem_wait(&task->work_done_sem).

The sem_wait can continue only when work_done_sem is greater than 0, or
it will be blocked.

For perf sched replay, one task may sem_post the work_done_sem of
another task, which causes the work_done_sem of that task processed in a
reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post...

This sequence simulates the sched process of the running tasks at the
time when perf sched record runs.

As a result, all the tasks are required and their threads must be
successfully created.

If any one (task A) of the tasks fails to create its thread, then
another task (task B), whose work_done_sem needs sem_post from that
failed task A, may likely block itself due to seg_wait.

And this is a dead halt, since task B's thread_func cannot continue at
all.

To solve this problem, perf sched replay should exit once any task fails
to create its thread.

Example:

Test environment: x86_64 with 160 cores

Before this patch:

 $ perf sched replay
 ...
 Error: sys_perf_event_open() syscall returned with -1 (Too many open
 files)
 ------------------------------------------------------------    <- dead halt

After this patch:

 $ perf sched replay
 ...
 task   1551 (           <unknown>:         0), nr_events: 10
 Error: sys_perf_event_open() syscall returned with -1 (Too many open
 files)
 $

As shown above, perf sched replay finishes the process after printing an
error message and does not block itself.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:25 -03:00
Yunlong Song
08097abc11 perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
The pr_err in self_open_counters() prints error message to stderr.
Unlike stdout, stderr uses memory buffer on the stack of each calling
process.

The pr_err in self_open_counters() works in a thread called thread_func
created in function create_tasks, which concurrently creates
sched->nr_tasks threads.

If the error happens and pr_err prints the error message in each of
these threads, the stack size of the perf process (default is 8192
kbytes) will quickly run out and the segmentation fault will happen
then.

To solve this problem, pr_err with self_open_counters() should be moved
from newly created threads to the old main thread of the perf process.
Then the pr_err can work in a stable situation without the strange
segmentation fault problem.

Example:

Test environment: x86_64 with 160 cores

Before this patch:

 $ perf sched replay
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 Segmentation fault

After this patch:

 $ perf sched replay
 ...
 task   1549 (             :163132:    163132), nr_events: 1
 task   1550 (             :163540:    163540), nr_events: 1
 task   1551 (           <unknown>:         0), nr_events: 10
 ...

As shown above, the result continues without any segmentation fault.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:24 -03:00
Yunlong Song
3a423a5c36 perf sched replay: Realloc the memory of pid_to_task stepwise to adapt to the different pid_max configurations
Although the memory of pid_to_task can be allocated via calloc according
to the value of /proc/sys/kernel/pid_max, it cannot handle the case when
pid_max is changed after 'perf sched record' has created its perf.data.

If the new pid_max configured in 'perf sched replay' is smaller than the
old pid_max configured in 'perf sched record', then it will cause the
assertion failure problem.

To solve this problem, we realloc the memory of pid_to_task stepwise
once the passed-in pid parameter in register_pid is larger than the
current pid_max.

Example:

Test environment: x86_64 with 160 cores

 $ cat /proc/sys/kernel/pid_max
 163840
 $ perf sched record ls
 $ echo 5000 > /proc/sys/kernel/pid_max
 $ cat /proc/sys/kernel/pid_max
 5000

Before this patch:

 $ perf sched replay
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 55356 nsecs
 the run test took 1000011 nsecs
 the sleep test took 1060940 nsecs
 perf: builtin-sched.c:337: register_pid: Assertion `!(pid >= (unsigned
 long)pid_max)' failed.
 Aborted

After this patch:

 $ perf sched replay
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 55611 nsecs
 the run test took 1000026 nsecs
 the sleep test took 1060486 nsecs
 nr_run_events:        10
 nr_sleep_events:      1562
 nr_wakeup_events:     5
 task      0 (                  :1:         1), nr_events: 1
 task      1 (                  :2:         2), nr_events: 1
 task      2 (                  :3:         3), nr_events: 1
 task      3 (                  :5:         5), nr_events: 1
 ...

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:23 -03:00
Yunlong Song
cb06ac256a perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:

Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.

Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.

Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.

Example:

Test environment: x86_64 with 160 cores

 $ cat /proc/sys/kernel/pid_max
 163840
 $ echo 1025000 > /proc/sys/kernel/pid_max
 $ cat /proc/sys/kernel/pid_max
 1025000

Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).

Before this patch:

 $ perf sched replay
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 55480 nsecs
 the run test took 1000008 nsecs
 the sleep test took 1063151 nsecs
 perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
 failed.
 Aborted

After this patch:

 $ perf sched replay
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 55435 nsecs
 the run test took 1000004 nsecs
 the sleep test took 1059312 nsecs
 nr_run_events:        10
 nr_sleep_events:      1562
 nr_wakeup_events:     5
 task      0 (                  :1:         1), nr_events: 1
 task      1 (                  :2:         2), nr_events: 1
 task      2 (                  :3:         3), nr_events: 1
 task      3 (                  :5:         5), nr_events: 1
 ...

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:22 -03:00
Yunlong Song
a35e27d0e5 perf sched replay: Increase the MAX_PID value to fix assertion failure problem
Current MAX_PID is only 65536, which will cause assertion failure problem
when CPU cores are more than 64 in x86_64.

This is because the pid_max value in x86_64 is at least
PIDS_PER_CPU_DEFAULT * num_possible_cpus() (see function pidmap_init
defined in kernel/pid.c), where PIDS_PER_CPU_DEFAULT is 1024 (defined in
include/linux/threads.h).

Thus for MAX_PID = 65536, the correspoinding CPU cores are
65536/1024=64.  This is obviously not enough at all for x86_64, and will
cause an assertion failure problem due to BUG_ON(pid >= MAX_PID) in the
codes.

We increase MAX_PID value from 65536 to 1024*1000, which can be used in
x86_64 with 1000 cores.

This number is finally decided according to the limitation of stack size
of calling process.

Use 'ulimit -a', the result shows the stack size of any process is 8192
Kbytes, which is defined in include/uapi/linux/resource.h (#define
_STK_LIM (8*1024*1024)).

Thus we choose a large enough value for MAX_PID, and make it satisfy to
the limitation of the stack size, i.e., making the perf process take up
a memory space just smaller than 8192 Kbytes.

We have calculated and tested that 1024*1000 is OK for MAX_PID.

This means perf sched replay can now be used with at most 1000 cores in
x86_64 without any assertion failure problem.

Example:

Test environment: x86_64 with 160 cores

 $ cat /proc/sys/kernel/pid_max
 163840

Before this patch:

 $ perf sched replay
 run measurement overhead: 240 nsecs
 sleep measurement overhead: 55379 nsecs
 the run test took 1000004 nsecs
 the sleep test took 1059424 nsecs
 perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 65536)'
 failed.
 Aborted

After this patch:

 $ perf sched replay
 run measurement overhead: 221 nsecs
 sleep measurement overhead: 55397 nsecs
 the run test took 999920 nsecs
 the sleep test took 1053313 nsecs
 nr_run_events:        10
 nr_sleep_events:      1562
 nr_wakeup_events:     5
 task      0 (                  :1:         1), nr_events: 1
 task      1 (                  :2:         2), nr_events: 1
 task      2 (                  :3:         3), nr_events: 1
 task      3 (                  :5:         5), nr_events: 1
 ...

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:21 -03:00
Yunlong Song
0755bc4dc7 perf sched replay: Use struct task_desc instead of struct task_task for correct meaning
There is no struct task_task at all, thus it is a typo error in the old
commits, now fix it to what it should be in order to avoid unnecessary
misunderstanding.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:19 -03:00
Jiri Olsa
28939e1a1f perf kmem: Respect -i option
Currently the perf kmem does not respect -i option.

Initializing the file.path properly after options get parsed.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:14 -03:00
Namhyung Kim
3201f0dc42 tools lib traceevent: Honor operator priority
Currently it ignores operator priority and just sets processed args as a
right operand.  But it could result in priority inversion in case that
the right operand is also a operator arg and its priority is lower.

For example, following print format is from new kmem events.

  "page=%p", REC->pfn != -1UL ? (((struct page *)(0xffffea0000000000UL)) + (REC->pfn)) : ((void *)0)

But this was treated as below:

  REC->pfn != ((null - 1UL) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0)

In this case, the right arg was '?' operator which has lower priority.
But it just sets the whole arg so making the output confusing - page was
always 0 or 1 since that's the result of logical operation.

With this patch, it can handle it properly like following:

  ((REC->pfn != (null - 1UL)) ? ((struct page *)0xffffea0000000000UL + REC->pfn) : (void *) 0)

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-10-git-send-email-namhyung@kernel.org
[ Replaced 'swap' with 'rotate' in a comment as requested by Steve and agreed by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:09 -03:00
Wang Nan
ba92732e98 perf kmaps: Check kmaps to make code more robust
This patch add checks in places where map__kmap is used to get kmaps
from struct kmap.

Error messages are added at map__kmap to warn invalid accessing of kmap
(for the case of !map->dso->kernel, kmap(map) does not exists at all).

Also, introduces map__kmaps() to warn uninitialized kmaps.

Reviewed-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1428394966-131044-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:07:03 -03:00
He Kuang
8ea92ceb74 perf evlist: Fix inverted logic in perf_mmap__empty
perf_evlist__mmap_consume() uses perf_mmap__empty() to judge whether
perf_mmap is empty and can be released. But the result is inverted so
fix it.

Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1428399071-7141-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-08 09:06:58 -03:00
Ingo Molnar
4bcc7827b0 Linux 4.0-rc7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVIws/AAoJEHm+PkMAQRiGwEcH/1GCBqrBzXaKwDdCPMRcYVUb
 MYkXmGkCGRYWe5MXI8QNAaa/CdG6mAFMHWN6CaMMpLTxnM1m87uBg01fQMsh73BO
 mRVLKE/soiJDnR1gYzBBDBYV/AUvytN5PhgeNaA95YIJvU3T1f3iTnV8vs30Dp0L
 YpxSqwr3C0k7C9IE0VcgfzvWJPCnQ9IWHuX3jn5s1XjGKVNbBYHMt6FusHdyXMfT
 dp8ksuGHwm30mTFI5xJpKOrRzfi+P5EsEUrsnFRPRM/iFTVrM5R7eaUhsRZb2+Wo
 YApnbYhUYz7om1AuQ+UZ/+S6y7ZLlGWegI1lWI754GIsczG5vPHEYhhgkzMhTsc=
 =kR1V
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc7' into x86/asm, to resolve conflicts

Conflicts:
	arch/x86/kernel/entry_64.S

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08 09:01:54 +02:00
Andy Lutomirski
3f705dfdf8 x86, selftests: Add sigreturn selftest
This is my sigreturn test, added mostly unchanged from its old
home. It exercises the sigreturn(2) syscall, specifically
focusing on its interactions with various IRET corner cases.

It tests for correct behavior in several areas that were
historically dangerously buggy. For example, it exercises espfix
on kernels of both bitnesses under various conditions, and it
contains testcases for several now-fixed bugs in IRET error
handling.

If you run it on older kernels without the fixes, your system will
crash. It probably won't eat your data in the process.

There is no released kernel on which the sigreturn_64 test will
pass, but it passes on tip:x86/asm.

I plan to switch to lib.mk for Linux 4.2.

I'm not using the ksft_ helpers at all yet.  I can do that later.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/89d10b76b92c7202d8123654dc8d36701c017b3d.1428386971.git.luto@kernel.org
[ Fixed empty format string GCC build warning in trivial_32bit_program.c ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-08 08:22:02 +02:00
Greg Kroah-Hartman
c610f7f772 Merge 4.0-rc7 into staging-next
We want those fixes (iio primarily) into the -next branch to help with
merge and testing issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-07 11:03:02 +02:00
Namhyung Kim
2bfd4d1f8c ftracetest: Do not use usleep directly
The usleep is only provided on distros from Redhat so running ftracetest
on other distro resulted in failures due to the missing usleep.

The reason of using [u]sleep in the test was to generate (scheduler)
events.  It can be done various ways like this:

yield() {  ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1; }

For more information to the history of this patch, please refer to:

Link: http://lkml.kernel.org/r/1427329943-16896-1-git-send-email-namhyung@kernel.org

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Suggested-by: Pádraig Brady <P@draigBrady.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-03 09:16:32 -06:00
David S. Miller
9f0d34bc34 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/asix_common.c
	drivers/net/usb/sr9800.c
	drivers/net/usb/usbnet.c
	include/linux/usb/usbnet.h
	net/ipv4/tcp_ipv4.c
	net/ipv6/tcp_ipv6.c

The TCP conflicts were overlapping changes.  In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.

With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02 16:16:53 -04:00
Tyler Baker
6886f41d88 selftest/mqueue: enable cross compilation
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 12:41:58 -06:00
Tyler Baker
5de8304904 selftest/ipc: enable cross compilation
Use the CC variable instead of hard coding gcc.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 12:41:52 -06:00
Tyler Baker
ab923bb9e2 selftest/memfd: include default header install path
Include the default path for INSTALL_HDR_PATH to make it less intrusive when
cross building.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 12:41:03 -06:00
Tyler Baker
365ce9997b selftest/mount: enable cross compilation
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 12:40:48 -06:00
Tyler Baker
52dd5576cd selftest/memfd: enable cross compilation
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.

Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 12:40:34 -06:00
John Stultz
48fd77d144 kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARM
The set-timer-lat test fails when testing CLOCK_BOOTTIME_ALARM
or CLOCK_REALTIME_ALARM when the user isn't running as root or
with CAP_WAKE_ALARM.

So this patch improves the error checking so we report the
issue more clearly and continue rather then reporting a failure.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2015-04-02 10:32:33 -06:00
Yunlong Song
bd05954bfa perf data: Support using -f to override perf.data file ownership for 'convert'
Enable perf data convert to use perf.data when it is not owned by
current user or root.

Example:

 # perf record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 28260 Apr  2 17:35 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf data convert --to-ctf=./ctf-data/
 File perf.data not owned by current user or root (use -f to override)
 # perf data convert --to-ctf=./ctf-data/ -f
   Error: unknown switch `f'

  usage: perf data convert [<options>]

     -v, --verbose         be more verbose
     -i, --input <file>    input file name
         --to-ctf ...      Convert to CTF format

After this patch:

 # perf data convert --to-ctf=./ctf-data/
 File perf.data not owned by current user or root (use -f to override)
 # perf data convert --to-ctf=./ctf-data/ -f
 # ls ctf-data/
 metadata  perf_stream_0

As shown above, the -f option really works now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:18:52 -03:00
Yunlong Song
e366a6d894 perf trace: Support using -f to override perf.data file ownership
Enable perf trace to use perf.data when it is not owned by current user
or root.

Example:

 # perf trace record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 4153101 Apr  2 15:28 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf trace -i perf.data
 File perf.data not owned by current user or root (use -f to override)
 # perf trace -i perf.data -f
   Error: unknown switch `f'

  usage: perf trace [<options>] [<command>]
     or: perf trace [<options>] -- <command> [<options>]
     or: perf trace record [<options>] [<command>]
     or: perf trace record [<options>] -- <command> [<options>]

         --event <event>   event selector. use 'perf list' to list
 						  available events
         --comm            show the thread COMM next to its id
         --tool_stats      show tool stats
     -e, --expr <expr>     list of events to trace
     -o, --output <file>   output file name
     -i, --input <file>    Analyze events in file
     -p, --pid <pid>       trace events on existing process id
     -t, --tid <tid>       trace events on existing thread id
         --filter-pids <float>
  ...

As shown above, the -f option does not work at all.

After this patch:

 # perf trace -i perf.data
 File perf.data not owned by current user or root (use -f to override)
 # perf trace -i perf.data -f
 0.056 ( 0.002 ms): ls/47325 brk(                                 ...
 0.108 ( 0.018 ms): ls/47325 mmap(len: 4096, prot: READ|WRITE,    ...
 0.145 ( 0.013 ms): ls/47325 access(filename: 0x7f31259a0eb0,     ...
 0.172 ( 0.008 ms): ls/47325 open(filename: 0x7fffeb9a0d00,       ...
 0.180 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00,       ...
 0.185 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00,       ...
 0.189 ( 0.003 ms): ls/47325 stat(filename: 0x7fffeb9a0d00,       ...
 0.195 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00,       ...
 0.199 ( 0.002 ms): ls/47325 stat(filename: 0x7fffeb9a0d00,       ...
 0.205 ( 0.004 ms): ls/47325 open(filename: 0x7fffeb9a0d00,       ...
 0.211 ( 0.004 ms): ls/47325 stat(filename: 0x7fffeb9a0d00,       ...
 0.220 ( 0.007 ms): ls/47325 open(filename: 0x7f312599e8ff,       ...
 ...
 ...

As shown above, the -f option really works now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:18:51 -03:00
Yunlong Song
44f7e432e3 perf timechart: Support using -f to override perf.data file ownership
Enable perf timechart to use perf.data when it is not owned by current
user or root.

Example:

 # perf timechart record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 5471744 Apr  2 15:15 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf timechart
 File perf.data not owned by current user or root (use -f to override)
 # perf timechart -f
   Error: unknown switch `f'

  usage: perf timechart [<options>] {record}

     -i, --input <file>    input file name
     -o, --output <file>   output file name
     -w, --width <n>       page width
         --highlight <duration or task name>
                           highlight tasks. Pass duration in ns or process name.
     -P, --power-only      output power data only
     -T, --tasks-only      output processes data only
     -p, --process <process>
                           process selector. Pass a pid or process name.
         --symfs <directory>
                           Look for files with symbols relative to this directory
     -n, --proc-num <n>    min. number of tasks to print
     -t, --topology        sort CPUs according to topology
         --io-skip-eagain  skip EAGAIN errors
         --io-min-time <time>
                           all IO faster than min-time will visually appear longer
         --io-merge-dist <time>
                           merge events that are merge-dist us apart

As shown above, the -f option does not work at all.

After this patch:

 # perf timechart
 File perf.data not owned by current user or root (use -f to override)
 # perf timechart -f
 Written 0.0 seconds of trace to output.svg.
 # cat output.svg
 <?xml version="1.0" standalone="no"?>
 <!DOCTYPE svg SYSTEM "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
 <svg width="1000" height="10110" version="1.1" xmlns="http://www.w3.org/2000/svg">
 <defs>
   <style type="text/css">
     <![CDATA[
       rect          { stroke-width: 1; }
 ...
 ...

As shown above, the -f option really works now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:18:50 -03:00
Yunlong Song
06af0f2c91 perf script: Support using -f to override perf.data file ownership
Enable perf script to use perf.data when it is not owned by current user
or root. Change the short option name of --fields to -F to avoid confusion
with --force.

Example:

 # perf record ls
 # chown Yunlong.Song:Yunlong.Song perf.data
 # ls -al perf.data
 -rw------- 1 Yunlong.Song Yunlong.Song 28360 Apr  2 14:53 perf.data
 # id
 uid=0(root) gid=0(root) groups=0(root),64(pkcs11)

Before this patch:

 # perf script
 File perf.data not owned by current user or root (use -f to override)
 # perf script -f
   Error: switch `f' requires a value

  usage: perf script [<options>]
     or: perf script [<options>] record <script> [<record-options>] <command>
     or: perf script [<options>] report <script> [script-args]
     or: perf script [<options>] <script> [<record-options>] <command>
     or: perf script [<options>] <top-script> [script-args]

     -f, --fields <str>    comma separated output fields prepend with
     'type:'. Valid types: hw,sw,trace,raw. Fields:
     comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr,symoff,period

As shown above, the -f option does not work at all. And -f is already
taken up by --fields, which makes --force confused, so change the short
option name of --fields to -F like what other perf commands do (e.g.
perf report -F) and use -f as the short option name of --force.

After this patch:

 # perf script
 File perf.data not owned by current user or root (use -f to override)
 # perf script -f
 :41298 41298 2590086.564226:          1 cycles:  ffffffff8103efc6
 native_write_msr_safe ([kernel.kallsyms])
 :41298 41298 2590086.564244:          1 cycles:  ffffffff8103efc6
 native_write_msr_safe ([kernel.kallsyms])
 :41298 41298 2590086.564249:          7 cycles:  ffffffff8103efc6
 native_write_msr_safe ([kernel.kallsyms])
 :41298 41298 2590086.564255:        176 cycles:  ffffffff8103efc6
 native_write_msr_safe ([kernel.kallsyms])
     ls 41298 2590086.567346:       4059 cycles:  ffffffff8105a592
     raise_softirq ([kernel.kallsyms])
     ls 41298 2590086.567353:       3717 cycles:  ffffffff8105a592
     raise_softirq ([kernel.kallsyms])
     ls 41298 2590086.567358:      63058 cycles:  ffffffff8105a592
     raise_softirq ([kernel.kallsyms])
     ls 41298 2590086.567448:    1706255 cycles:            406ae0
     [unknown] (/usr/bin/ls)

As shown above, the -f option really works now.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-02 13:18:50 -03:00