Commit Graph

240 Commits

Author SHA1 Message Date
Peter Zijlstra (Intel)
e9d867a67f sched: Allow per-cpu kernel threads to run on online && !active
In order to enable symmetric hotplug, we must mirror the online &&
!active state of cpu-down on the cpu-up side.

However, to retain sanity, limit this state to per-cpu kthreads.

Aside from the change to set_cpus_allowed_ptr(), which allow moving
the per-cpu kthreads on, the other critical piece is the cpu selection
for pinned tasks in select_task_rq(). This avoids dropping into
select_fallback_rq().

select_fallback_rq() cannot be allowed to select !active cpus because
its used to migrate user tasks away. And we do not want to move user
tasks onto cpus that are in transition.

Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jan H. Schönherr <jschoenh@amazon.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160301152303.GV6356@twins.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-05-06 14:58:22 +02:00
Thomas Gleixner
fc6d73d674 arch/hotplug: Call into idle with a proper state
Let the non boot cpus call into idle with the corresponding hotplug state, so
the hotplug core can handle the further bringup. That's a first step to
convert the boot side of the hotplugged cpus to do all the synchronization
with the other side through the state machine. For now it'll only start the
hotplug thread and kick the full bringup of the cpu.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Rik van Riel <riel@redhat.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-01 20:36:57 +01:00
Heiko Carstens
cd17e153af s390: remove superfluous memblock_alloc() return value checks
memblock_alloc() and memblock_alloc_base() will panic on their own if
they can't find free memory. Therefore remove some pointless checks.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-19 12:14:02 +01:00
Heiko Carstens
c667aeacc1 s390: rename struct _lowcore to struct lowcore
Finally get rid of the leading underscore. I tried this already two or
three years ago, however Michael Holzheu objected since this would
break the crash utility (again).

However Michael integrated support for the new name into the crash
utility back then, so it doesn't break if the name will be changed
now.  So finally get rid of the ever confusing leading underscore.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-11 12:27:15 +01:00
Heiko Carstens
3dbc78d3a1 s390/smp: save timestamp on external calls
This is supposed to make debugging easier: if within a dump we can see
that an external call or emergency signal IPI is pending but all cpus
are idle, we have no idea for how long the interrupt is outstanding.

Therefore save a timestamp into the per cpu pcpu array of the target
cpu whenever such an IPI is sent.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-18 14:59:31 +01:00
Martin Schwidefsky
1a2c5840ac s390/dump: cleanup CPU save area handling
Introduce save_area_alloc(), save_area_boot_cpu(), save_area_add_regs()
and save_area_add_vxrs to deal with storing the CPU state in case of a
system dump. Remove struct save_area and save_area_ext, and create a new
struct save_area as a local definition to arch/s390/kernel/crash_dump.c.
Copy each individual field from the hardware status area to the save area,
storing the minimum of required data.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27 09:24:14 +01:00
Martin Schwidefsky
1a36a39e22 s390/dump: rework CPU register dump code
To collect the CPU registers of the crashed system allocated a single
page with memblock_alloc_base and use it as a copy buffer. Replace the
stop-and-store-status sigp with a store-status-at-address sigp in
smp_save_dump_cpus() and smp_store_status(). In both cases the target
CPU is already stopped and store-status-at-address avoids the detour
via the absolute zero page.

For kexec simplify s390_reset_system and call store_status() before
the prefix register of the boot CPU has been set to zero. Use STPX
to store the prefix register and remove dump_prefix_page.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27 09:24:14 +01:00
Martin Schwidefsky
f08b841463 s390/dump: remove SAVE_AREA_BASE
Replace the SAVE_AREA_BASE offset calculations in reipl.S with the
assembler constant for the location of each register status area.

Use __LC_FPREGS_SAVE_AREA instead of SAVE_AREA_BASE in the three
remaining code locations and remove the definition of SAVE_AREA_BASE.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27 09:24:14 +01:00
Martin Schwidefsky
df9694c797 s390/dump: streamline oldmem copy functions
Introduce two copy functions for the memory of the dumped system,
copy_oldmem_kernel() to copy to the virtual kernel address space
and copy_oldmem_user() to copy to user space.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27 09:24:12 +01:00
Martin Schwidefsky
8a07dd02d7 s390/kdump: remove code to create ELF notes in the crashed system
The s390 architecture can store the CPU registers of the crashed system
after the kdump kernel has been started and this is the preferred way.
Remove the remaining code fragments that deal with storing CPU registers
while the crashed system is still active.

Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-11-27 09:24:12 +01:00
Christian Borntraeger
e22cf8ca6f s390/cpumf: rework program parameter setting to detect guest samples
The program parameter can be used to mark hardware samples with
some token.  Previously, it was used to mark guest samples only.

Improve the program parameter doubleword by combining two parts,
the leftmost LPP part and the rightmost PID part.  Set the PID
part for processes by using the task PID.
To distinguish host and guest samples for the kernel (PID part
is zero), the guest must always set the program paramater to a
non-zero value.  Use the leftmost bit in the LPP part of the
program parameter to be able to detect guest kernel samples.

[brueckner@linux.vnet.ibm.com]: Split __LC_CURRENT and introduced
__LC_LPP. Corrected __LC_CURRENT users and adjusted assembler parts.
And updated the commit message accordingly.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14 14:32:12 +02:00
Martin Schwidefsky
b5a6b71b19 s390/diag: add tracepoint for diagnose calls
To be able to analyse problems in regard to hypervisor overhead
add a tracepoing for diagnose calls. It reports the number of
the diagnose issued, e.g.

            sshd-1385  [002] ....    42.701431: diagnose: nr=0x9c
          <idle>-0     [001] ..s.    43.587528: diagnose: nr=0x9c

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14 14:32:06 +02:00
Martin Schwidefsky
1ec2772e0c s390/diag: add a statistic for diagnose calls
Introduce /sys/debug/kernel/diag_stat with a statistic how many diagnose
calls have been done by each CPU in the system.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-14 14:32:06 +02:00
Heiko Carstens
e7f596de19 s390/smp: add missing __init annotation to __smp_store_cpu_state()
Section mismatch in reference from the function __smp_store_cpu_state()
  to the function .init.text:memblock_alloc()
The function __smp_store_cpu_state() references
the function __init memblock_alloc().

Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-29 09:11:42 +02:00
Heiko Carstens
1af135a1e7 s390/kdump: fix compile for !SMP
Fix this compile error:

arch/s390/kernel/setup.c:875:2: error:
 implicit declaration of function 'smp_save_dump_cpus'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 10:13:11 +02:00
Michael Holzheu
1592a8e456 s390/kdump: fix nosmt kernel parameter
It turned out that SIGP set-multi-threading can only be done once.
Therefore switching to a different MT level after switching to
sclp.mtid_prev in the dump case fails.

As a symptom specifying the "nosmt" parameter currently fails for
the kdump kernel and the kernel starts with multi-threading enabled.

So fix this and issue diag 308 subcode 1 call after collecting the
CPU states for the dump. Also enhance the diag308_reset() function to
be usable also with enabled lowcore protection and prefix register != 0.
After the reset it is possible to switch the MT level again. We have
to do the reset very early in order not to kill the already initialized
console. Therefore instead of kmalloc() the corresponding memblock
functions have to be used. To avoid copying the sclp cpu code into
sclp_early, we now use the simple sigp loop method for CPU detection.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:26 +02:00
Martin Schwidefsky
d08d94306e s390/smp: cleanup core vs. cpu in the SCLP interface
The SCLP interface to query, configure and deconfigure CPUs actually
operates on cores. For a machine without the multi-threading faciltiy
a CPU and a core are equivalent but starting with System z13 a core
can have multiple hardware threads, also referred to as logical CPUs.

To avoid confusion replace the word 'cpu' with 'core' in the SCLP
interface. Also replace MAX_CPU_ADDRESS with SCLP_MAX_CORES.
The core-id is an 8-bit field, the maximum thread id is in the range
0-31. The theoretical limit for the CPU address is therefore 8191.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:24 +02:00
Martin Schwidefsky
e7086eb181 s390/smp: fix sigp cpu detection loop
On a (theoretical) system where the read-cpu-info SCLP command does
not work but SMT is enabled, the sigp detection loop may not find
all configured cores. The maximum CPU address needs to be shifted
with smp_cpu_mt_shift.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-25 09:39:24 +02:00
David Hildenbrand
3a9f3fe69e s390/sclp: get rid of sclp_get_mtid() and sclp_get_mtid_max()
As all relevant sclp data is now directly accessible, let's move the
logic of these two functions to the single caller.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
David Hildenbrand
37c5f6c86c s390/sclp: unify basic sclp access by exposing "struct sclp"
Let's unify basic access to sclp fields by storing the data in an external
struct in asm/sclp.h.

The values can now directly be accessed by other components, so there is
no need for most accessor functions and external variables anymore.

The mtid, mtid_max and facility part will be cleaned up separately.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:17 +02:00
David Hildenbrand
9747bc47b3 s390/sclp: prepare smp_fill_possible_mask for global "struct sclp"
We need to rename sclp -> sclp_max to prepare for using the global variable
"sclp" for sclp access later in this function.

Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-05-13 09:58:16 +02:00
Heiko Carstens
a1307bba1a s390/smp: wait until secondaries are active & online
This is the s390 version of 875ebe940d ("powerpc/smp: Wait until secondaries
are active & online").
The race described in length within the commit message is also possible on s390
and every other architecture. So fix this race on s390 as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-04-13 10:46:20 +02:00
Heiko Carstens
5a79859ae0 s390: remove 31 bit support
Remove the 31 bit support in order to reduce maintenance cost and
effectively remove dead code. Since a couple of years there is no
distribution left that comes with a 31 bit kernel.

The 31 bit kernel also has been broken since more than a year before
anybody noticed. In addition I added a removal warning to the kernel
shown at ipl for 5 minutes: a960062e58 ("s390: add 31 bit warning
message") which let everybody know about the plan to remove 31 bit
code. We didn't get any response.

Given that the last 31 bit only machine was introduced in 1999 let's
remove the code.
Anybody with 31 bit user space code can still use the compat mode.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-03-25 11:49:33 +01:00
Heiko Carstens
2f859d0dad s390/smp: reduce size of struct pcpu
Reduce the size of struct pcpu, since the pcpu_devices array consists
of NR_CPUS elements of type struct pcpu. For most machines this is just
a waste of memory.
So let's try to make it a bit smaller.
This saves 16k with performance_defconfig.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-12 09:37:23 +01:00
Paul Bolle
032f1be056 s390/smp: remove check for CONFIG_ZFCPDUMP
Commit 725908110a1f ("s390: add SMT support") added a check for
CONFIG_ZFCPDUMP. But the Kconfig symbol ZFCPDUMP was removed in v3.16
through commit bf28a5970d ("s390/dump: Remove CONFIG_ZFCPDUMP"). So
this check will always evaluate to false. No one noticed probably
because the code also checks for CONFIG_CRASH_DUMP which "also enables
s390 zfcpdump".

Dump the unneeded check.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:06 +01:00
Martin Schwidefsky
10ad34bc76 s390: add SMT support
The multi-threading facility is introduced with the z13 processor family.
This patch adds code to detect the multi-threading facility. With the
facility enabled each core will surface multiple hardware threads to the
system. Each hardware threads looks like a normal CPU to the operating
system with all its registers and properties.

The SCLP interface reports the SMT topology indirectly via the maximum
thread id. Each reported CPU in the result of a read-scp-information
is a core representing a number of hardware threads.

To reflect the reduced CPU capacity if two hardware threads run on a
single core the MT utilization counter set is used to normalize the
raw cputime obtained by the CPU timer deltas. This scaled cputime is
reported via the taskstats interface. The normal /proc/stat numbers
are based on the raw cputime and are not affected by the normalization.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-01-22 12:16:01 +01:00
Heiko Carstens
c933146a5e s390/ftrace,kprobes: allow to patch first instruction
If the function tracer is enabled, allow to set kprobes on the first
instruction of a function (which is the function trace caller):

If no kprobe is set handling of enabling and disabling function tracing
of a function simply patches the first instruction. Either it is a nop
(right now it's an unconditional branch, which skips the mcount block),
or it's a branch to the ftrace_caller() function.

If a kprobe is being placed on a function tracer calling instruction
we encode if we actually have a nop or branch in the remaining bytes
after the breakpoint instruction (illegal opcode).
This is possible, since the size of the instruction used for the nop
and branch is six bytes, while the size of the breakpoint is only
two bytes.
Therefore the first two bytes contain the illegal opcode and the last
four bytes contain either "0" for nop or "1" for branch. The kprobes
code will then execute/simulate the correct instruction.

Instruction patching for kprobes and function tracer is always done
with stop_machine(). Therefore we don't have any races where an
instruction is patched concurrently on a different cpu.
Besides that also the program check handler which executes the function
trace caller instruction won't be executed concurrently to any
stop_machine() execution.

This allows to keep full fault based kprobes handling which generates
correct pt_regs contents automatically.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-27 13:27:27 +01:00
Michael Holzheu
a62bc07392 s390/kdump: add support for vector extension
With this patch for kdump the s390 vector registers are stored into the
prepared save areas in the old kernel and into the REGSET_VX_LOW and
REGSET_VX_HIGH ELF notes for /proc/vmcore in the new kernel.

The NT_S390_VXRS_LOW note contains the lower halves of the first 16 vector
registers 0-15. The higher halves are stored in the floating point register
ELF note.  The NT_S390_VXRS_HIGH contains the full vector registers 16-31.

The kernel provides a save area for storing vector register in case of
machine checks. A pointer to this save are is stored in the CPU lowcore
at offset 0x11b0. This save area is also used to save the registers for
kdump. In case of a dumped crashed kdump those areas are used to extract
the registers of the production system.

The vector registers for remote CPUs are stored using the "store additional
status at address" SIGP. For the dump CPU the vector registers are stored
with the VSTM instruction.

With this patch also zfcpdump stores the vector registers.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:16 +02:00
Martin Schwidefsky
8070361799 s390: add support for vector extension
The vector extension introduces 32 128-bit vector registers and a set of
instruction to operate on the vector registers.

The kernel can control the use of vector registers for the problem state
program with a bit in control register 0. Once enabled for a process the
kernel needs to retain the content of the vector registers on context
switch. The signal frame is extended to include the vector registers.
Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added
to the regset interface for the debugger and core dumps.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:13 +02:00
Martin Schwidefsky
b5f87f15e2 s390/idle: consolidate idle functions and definitions
Move the C functions and definitions related to the idle state handling
to arch/s390/include/asm/idle.h and arch/s390/kernel/idle.c. The function
s390_get_idle_time is renamed to arch_cpu_idle_time and vtime_stop_cpu to
enabled_wait.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:03 +02:00
Martin Schwidefsky
fe0f49768d s390/nohz: use a per-cpu flag for arch_needs_cpu
Move the nohz_delay bit from the s390_idle data structure to the
per-cpu flags. Clear the nohz delay flag in __cpu_disable and
remove the cpu hotplug notifier that used to do this.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-09 09:14:02 +02:00
Martin Schwidefsky
d59b93da5e s390/rwlock: use directed yield for write-locked rwlocks
Add an owner field to the arch_rwlock_t to be able to pass the timeslice
of a virtual CPU with diagnose 0x9c to the lock owner in case the rwlock
is write-locked. The undirected yield in case the rwlock is acquired
writable but the lock is read-locked is removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-25 10:52:05 +02:00
Michael Holzheu
f4192bf2dc s390/smp: Avoid busy loop after halt and "begin" on z/VM
Currently the smp_stop_cpu() function for SMP kernels enters a busy
loop when "begin" is entered on the z/VM console after Linux is halted.
To avoid this behavior, use the non-SMP variant of smp_stop_cpu()
which stops the CPU again after "begin" is entered. As a side
effect we now have consistent behavior for SMP and non-SMP Linux.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20 08:58:45 +02:00
Michael Holzheu
bf28a5970d s390/dump: Remove CONFIG_ZFCPDUMP
Currently there are two s390 kernel dump config options "CONFIG_ZFCPDUMP"
and "CONFIG_CRASH_DUMP". In order to keep things simple and because the
"CONFIG_ZFCPDUMP" option already has a dependency to "CONFIG_CRASH_DUMP"
remove the CONFIG_ZFCPDUMP option.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20 08:58:43 +02:00
Philipp Hachtmann
6c8cd5bbda s390/spinlock: optimize spinlock code sequence
Use lowcore constant to improve the code generated for spinlocks.

[ Martin Schwidefsky: patch breakdown and code beautification ]

Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-05-20 08:58:42 +02:00
Heiko Carstens
e7c46c66db s390/smp: fix smp_stop_cpu() for !CONFIG_SMP
smp_stop_cpu() should stop the current cpu even for !CONFIG_SMP.
Otherwise machine_halt() will return and and the machine generates a
panic instread of simply stopping the current cpu:

Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 3.14.0-01527-g2b6ef16a6bc5 #10
[...]
Call Trace:
([<0000000000110db0>] show_trace+0xf8/0x158)
 [<0000000000110e7a>] show_stack+0x6a/0xe8
 [<000000000074dba8>] panic+0xe4/0x268
 [<0000000000140570>] do_exit+0xa88/0xb2c
 [<000000000016e12c>] SyS_reboot+0x1f0/0x234
 [<000000000075da70>] sysc_nr_ok+0x22/0x28
 [<000000007d5a09b4>] 0x7d5a09b4

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-09 10:19:12 +02:00
Linus Torvalds
d586c86d50 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull second set of s390 patches from Martin Schwidefsky:
 "The second part of Heikos uaccess rework, the page table walker for
  uaccess is now a thing of the past (yay!)

  The code change to fix the theoretical TLB flush problem allows us to
  add a TLB flush optimization for zEC12, this machine has new
  instructions that allow to do CPU local TLB flushes for single pages
  and for all pages of a specific address space.

  Plus the usual bug fixing and some more cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uaccess: rework uaccess code - fix locking issues
  s390/mm,tlb: optimize TLB flushing for zEC12
  s390/mm,tlb: safeguard against speculative TLB creation
  s390/irq: Use defines for external interruption codes
  s390/irq: Add defines for external interruption codes
  s390/sclp: add timeout for queued requests
  kvm/s390: also set guest pages back to stable on kexec/kdump
  lcs: Add missing destroy_timer_on_stack()
  s390/tape: Add missing destroy_timer_on_stack()
  s390/tape: Use del_timer_sync()
  s390/3270: fix crash with multiple reset device requests
  s390/bitops,atomic: add missing memory barriers
  s390/zcrypt: add length check for aligned data to avoid overflow in msg-type 6
2014-04-08 12:02:28 -07:00
Linus Torvalds
467a9e1633 CPU hotplug notifiers registration fixes for 3.15-rc1
The purpose of this single series of commits from Srivatsa S Bhat (with
 a small piece from Gautham R Shenoy) touching multiple subsystems that use
 CPU hotplug notifiers is to provide a way to register them that will not
 lead to deadlocks with CPU online/offline operations as described in the
 changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
 of callback registration functions).
 
 The first three commits in the series introduce the API and document it
 and the rest simply goes through the users of CPU hotplug notifiers and
 converts them to using the new method.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTQow2AAoJEILEb/54YlRxW4QQAJlYRDUzwFJzJzYhltQYuVR+
 4D74XMtvXgoJfg3cwdSWvMKKpJZnA9BVN0f7Hcx9wYmgdexYUuHeZJmMNyc3S2+g
 KjKBIsugvgmZhHbbLd6TJ6GBbhGT5JLt9VmSfL9zIkveInU1YHFUUqL/mxdHm4J0
 BSGKjk2rN3waRJgmY+xfliFLtQjDKFwJpMuvrgtoUyfas3f4sIV43UNbqdvA/weJ
 rzedxXOlKH/id4b56lj/4iIzcoL3mwvJJ7r6n0CEMsKv87z09kqR0O+69Tsq/cgs
 j17CsvoJOmZGk3QTeKVMQWBsvk6aPoDu3zK83gLbQMt+qjOpSTbJLz/3HZw4/TrW
 ss4nuZne1DLMGS+6hoxYbTP+6Ni//Kn+l/LrHc5jb7m1X3lMO4W2aV3IROtIE1rv
 lEP1IG01NU4u9YwkVj1dyhrkSp8tLPul4SrUK8W+oNweOC5crjJV7vJbIPJgmYiM
 IZN55wln0yVRtR4TX+rmvN0PixsInE8MeaVCmReApyF9pdzul/StxlBze5BKLSJD
 cqo1kNPpsmdxoDucqUpQ/gSvy+IOl2qnlisB5PpV93sk7De6TFDYrGHxjYIW7jMf
 StXwdCDDQhzd2Q8Kfpp895A1dbIl8rKtwA6bTU2eX+BfMVFzuMdT44cvosx1+UdQ
 sWl//rg76nb13dFjvF+q
 =SW7Q
 -----END PGP SIGNATURE-----

Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
 "The purpose of this single series of commits from Srivatsa S Bhat
  (with a small piece from Gautham R Shenoy) touching multiple
  subsystems that use CPU hotplug notifiers is to provide a way to
  register them that will not lead to deadlocks with CPU online/offline
  operations as described in the changelog of commit 93ae4f978c ("CPU
  hotplug: Provide lockless versions of callback registration
  functions").

  The first three commits in the series introduce the API and document
  it and the rest simply goes through the users of CPU hotplug notifiers
  and converts them to using the new method"

* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  net/iucv/iucv.c: Fix CPU hotplug callback registration
  net/core/flow.c: Fix CPU hotplug callback registration
  mm, zswap: Fix CPU hotplug callback registration
  mm, vmstat: Fix CPU hotplug callback registration
  profile: Fix CPU hotplug callback registration
  trace, ring-buffer: Fix CPU hotplug callback registration
  xen, balloon: Fix CPU hotplug callback registration
  hwmon, via-cputemp: Fix CPU hotplug callback registration
  hwmon, coretemp: Fix CPU hotplug callback registration
  thermal, x86-pkg-temp: Fix CPU hotplug callback registration
  octeon, watchdog: Fix CPU hotplug callback registration
  oprofile, nmi-timer: Fix CPU hotplug callback registration
  intel-idle: Fix CPU hotplug callback registration
  clocksource, dummy-timer: Fix CPU hotplug callback registration
  drivers/base/topology.c: Fix CPU hotplug callback registration
  acpi-cpufreq: Fix CPU hotplug callback registration
  zsmalloc: Fix CPU hotplug callback registration
  scsi, fcoe: Fix CPU hotplug callback registration
  scsi, bnx2fc: Fix CPU hotplug callback registration
  scsi, bnx2i: Fix CPU hotplug callback registration
  ...
2014-04-07 14:55:46 -07:00
Martin Schwidefsky
1b948d6cae s390/mm,tlb: optimize TLB flushing for zEC12
The zEC12 machines introduced the local-clearing control for the IDTE
and IPTE instruction. If the control is set only the TLB of the local
CPU is cleared of entries, either all entries of a single address space
for IDTE, or the entry for a single page-table entry for IPTE.
Without the local-clearing control the TLB flush is broadcasted to all
CPUs in the configuration, which is expensive.

The reset of the bit mask of the CPUs that need flushing after a
non-local IDTE is tricky. As TLB entries for an address space remain
in the TLB even if the address space is detached a new bit field is
required to keep track of attached CPUs vs. CPUs in the need of a
flush. After a non-local flush with IDTE the bit-field of attached CPUs
is copied to the bit-field of CPUs in need of a flush. The ordering
of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is
such that an underindication in mm_cpumask(mm) is prevented but an
overindication in mm_cpumask(mm) is possible.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 14:31:00 +02:00
Thomas Huth
1dad093b66 s390/irq: Use defines for external interruption codes
Use the new defines for external interruption codes to get rid
of "magic" numbers in the s390 source code. And while we're at it,
also rename the (un-)register_external_interrupt function to
something shorter so that this patch does not exceed the 80
columns all over the place.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 14:30:52 +02:00
Srivatsa S. Bhat
f4edbcd5d1 s390, smp: Fix CPU hotplug callback registration
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:

	get_online_cpus();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	register_cpu_notifier(&foobar_cpu_notifier);

	put_online_cpus();

This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).

Instead, the correct and race-free way of performing the callback
registration is:

	cpu_notifier_register_begin();

	for_each_online_cpu(cpu)
		init_cpu(cpu);

	/* Note the use of the double underscored version of the API */
	__register_cpu_notifier(&foobar_cpu_notifier);

	cpu_notifier_register_done();

Fix the smp code in s390 by using this latter form of callback registration.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20 13:43:41 +01:00
Heiko Carstens
cf813db0b4 s390/smp: limit number of cpus in possible cpu mask
Limit the number of bits to the maximum number of cpus a machine
can have.
possible_cpu_mask typically will have more bits set than a machine
may physically have. This results in wasted memory during per-cpu
memory allocations, if the possible mask contains more cpus than
physically possible for a given configuration.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-17 15:53:06 +01:00
Linus Torvalds
f479c01c8e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "The bulk of the s390 updates for v3.14.

  New features are the perf support for the CPU-Measurement Sample
  Facility and the EP11 support for the crypto cards.  And the normal
  cleanups and bug-fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
  s390/cpum_sf: fix printk format warnings
  s390: Fix misspellings using 'codespell' tool
  s390/qdio: bridgeport support - CHSC part
  s390: delete new instances of __cpuinit usage
  s390/compat: fix PSW32_USER_BITS definition
  s390/zcrypt: add support for EP11 coprocessor cards
  s390/mm: optimize randomize_et_dyn for !PF_RANDOMIZE
  s390: use IS_ENABLED to check if a CONFIG is set to y or m
  s390/cio: use device_lock to synchronize calls to the ccwgroup driver
  s390/cio: use device_lock to synchronize calls to the ccw driver
  s390/cio: fix unlocked access of online member
  s390/cpum_sf: Add flag to process full SDBs only
  s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function
  s390/cpum_sf: Filter perf events based event->attr.exclude_* settings
  s390/cpum_sf: Detect KVM guest samples
  s390/cpum_sf: Add helper to read TOD from trailer entries
  s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks
  s390/cpum_sf: Dynamically extend the sampling buffer if overflows occur
  s390/pci: reenable per default
  s390/pci/dma: fix accounting of allocated_pages
  ...
2014-01-20 09:23:31 -08:00
Heiko Carstens
d80512f874 s390/smp: improve setup of possible cpu mask
Since under z/VM we cannot have more than 64 cpus, make sure the
cpu_possible_mask does not contain more bits.
This avoids wasting memory for dynamic per-cpu allocations if
CONFIG_NR_CPUS is larger than 64.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-18 17:35:18 +01:00
Heiko Carstens
96619fc1b3 s390/smp: reduce memory consumption of pcpu_devices array
Remove the embedded struct cpu from struct pcpu and replace it with a
pointer instead. The struct cpu now gets allocated when a new cpu gets
detected.

The size of the pcpu_devices array (NR_CPUS * sizeof(struct pcpu)) gets
reduced by nearly 120KB.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:46 +01:00
Heiko Carstens
dea24190fb s390/smp: only send external call ipi if needed
If the per cpu ec_mask bit of the receiving cpu is already set there is
no need to send an ipi, since a different cpu has already sent an ipi
and the receiving cpu has not yet executed the external call ipi handler.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-12-16 14:37:43 +01:00
Martin Schwidefsky
4560e7c331 s390/vtime: correct idle time calculation
Use the ACCESS_ONCE macro for both accesses to idle->sequence in the
loops to calculate the idle time. If only one access uses the macro,
the compiler is free to cache the value for the second access which
can cause endless loops.

Cc: stable@vger.kernel.org # 3.6+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-31 09:52:52 +01:00
Michael Holzheu
5895294274 s390: Remove zfcpdump NR_CPUS dependency
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS
CPUss. This dependency is not necessary. So remove it by dynamically
allocating the save area array.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24 17:17:04 +02:00
Martin Schwidefsky
e258d719ff s390/uaccess: always run the kernel in home space
Simplify the uaccess code by removing the user_mode=home option.
The kernel will now always run in the home space mode.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24 17:16:57 +02:00
Heiko Carstens
63df41d663 s390: make various functions static, add declarations to header files
Make various functions static, add declarations to header files to
fix a couple of sparse findings.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2013-09-07 11:58:03 +02:00