Commit Graph

248 Commits

Author SHA1 Message Date
Linus Torvalds
a727fea99b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  tifm_sd: treat "status error" as normal command completion
  mmc: wbsd: Remove stray kunmap_atomic()
  mmc: sdhci: Stop asking for mail
  mmc: sdhci: Remove driver version
  mmc: wbsd: Remove driver version
2007-02-11 11:39:00 -08:00
Alex Dubov
12c834527b tifm_sd: treat "status error" as normal command completion
TI FlasMedia controller attempts to validate command responses and
issues a "status error" if response does not matches its perceived
(by controller) value. As mmc layer does its own validation we can
safely ignore the controller's opinion.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-11 16:28:22 +01:00
Pierre Ossman
abc71668b5 mmc: wbsd: Remove stray kunmap_atomic()
There was one kunmap_atomic() left over from
4a0ddbd25a that was causing
crashes.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-11 16:27:13 +01:00
Al Viro
9f3bed5fdb [PATCH] TIFM should depend on PCI - TIFM_CORE leads to use of pci primitives
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09 08:28:48 -08:00
Pierre Ossman
acf1da4522 mmc: sdhci: Stop asking for mail
We get enough error reports without having to ask for it.
Remove notices about mailing the development list.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-09 08:29:19 +01:00
Pierre Ossman
52fbf9c976 mmc: sdhci: Remove driver version
The driver version was only really meaningful when it was an
out-of-tree driver. Now we can use the version of the kernel.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-09 08:23:41 +01:00
Pierre Ossman
1615cc224e mmc: wbsd: Remove driver version
The driver version was only really meaningful when it was an
out-of-tree driver. Now we can use the version of the kernel.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-09 08:19:07 +01:00
Pierre Ossman
f9d429a2e5 mmc: tifm: replace kmap with page_address
Since we actively avoid highmem, calling kmap_atomic() instead
of page_address() is effectively only obfuscation.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:12 +01:00
Pierre Ossman
c70840e819 mmc: sdhci: fix voltage ocr
Some bad if-clauses caused the driver to just report the highest
supported voltage, not all.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:12 +01:00
Pierre Ossman
2a22b14edf mmc: sdhci: replace kmap with page_address
Since we actively avoid highmem, calling kmap_atomic() instead
of page_address() is effectively only obfuscation.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:12 +01:00
Pierre Ossman
4a0ddbd25a mmc: wbsd: replace kmap with page_address
Since we actively avoid highmem, calling kmap_atomic() instead
of page_address() is effectively only obfuscation.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:11 +01:00
Pierre Ossman
df1c4b7bf7 mmc: handle pci_enable_device() return value in sdhci
Make sure we report back any errors from pci_enable_device().

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:11 +01:00
Pierre Ossman
397411e67f mmc: Proper unclaim in mmc_block
Make sure we release the claim on the host even on failure.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:11 +01:00
Pierre Ossman
ae06eaf9ab mmc: Graceful fallback for fancy features
MMC high-speed, wide bus support and SD high-speed
are functions that aren't critical for correct
operation of the card. As such, they shouldn't mark
the card as bad or dead when there is a failure
activating these features.

This is needed in particular on some really stupid
hardware (e.g. Winbond's) where not all data transfer
commands are supported.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:11 +01:00
Pierre Ossman
5ba593a972 mmc: Handle wbsd's stupid command list
The wbsd hardware is so incredibly brain damaged that it has an internal
list of commands that result in data transfers. The result being that
commands that aren't on this list aren't supported.

Instead of locking up, waiting for a data interrupt that will never come,
we try to fail a bit more gracefully.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:11 +01:00
Pierre Ossman
55db890a83 mmc: Allow host drivers to specify max block count
Many controllers have an upper limit on the number of blocks that can be
transferred in one request. Allow the host drivers to specify this and make
sure we avoid hitting this limit.

Also change the max_sectors field to avoid confusion. This makes it map
less directly to the block layer limits, but as they didn't apply directly
on MMC cards anyway, this isn't a great loss.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:10 +01:00
Pierre Ossman
fe4a3c7a20 mmc: Allow host drivers to specify a max block size
Most controllers have an upper limit on the block size. Allow the host
drivers to specify this and make sure we avoid hitting this limit.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:10 +01:00
Alex Dubov
dba4accab1 tifm_sd: add suspend and resume functionality
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:10 +01:00
Alex Dubov
50743f4cb1 Remove unused return value from signal_irq callback
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:08 +01:00
Alex Dubov
2e8ce5e741 tifm_sd: prettify
This patch introduces no semantic changes - it is here for estetic purposes.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:08 +01:00
Alex Dubov
8e02f8581c tifm_sd: restructure initialization, removal and command handling
In order to support correct suspend and resume several changes were needed:
1. Switch from work_struct to tasklet for command handling. When device
suspend is called workqueues are already frozen and can not be used.
2. Separate host initialization code from driver's probe and don't rely
on interrupts for host initialization. This, in turn, addresses two
problems:
 a) Resume needs to re-initialize the host, but can not assume that
    device interrupts were already re-armed.
 b) Previously, probe will return successfully before really knowing
    the state of the host, as host interrupts were not armed in time.
    Now it uses polling to determine the real host state before returning.
3. Separate termination code from driver's remove. Termination may be caused
by resume, if media changed type or became unavailable during suspend.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Alex Dubov
83d420ba92 tifm_sd: fix hardware timeout setup
The register access order when setting hardware timeout was incorrect and
causing problems (wrong timeout intervals). This is now fixed.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Alex Dubov
0803dd0c25 tifm_sd: Switch software timeout handler from work_struct to timer
Two changes are introduced to software timeout handler in order to simplify
its management:
1. The implementation is switched from work_struct to timer
2. Previously, software timeout was rearmed with each interrupt. Now,
current request must complete entirely within timeout interval.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Alex Dubov
255ef22e89 tifm_sd: use kmap_atomic instead of kmap for PIO data buffer
Data buffer for PIO transfer used to be mapped in advance with kmap.
Abolish it in favor of on-demand kmap_atomic.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Alex Dubov
1289335a2a tifm_sd: alter order of the states in the command handler
Previously, stop command was issued right after BRS (block received/sent)
event. Stop command completion event could interfere with the card busy
event, causing miscount of the written blocks.
This patch ensures that stop command issued as last action for a
particular command, after DMA sompletion event and written block
count verification.

Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Philip Langdale
fba68bd2da mmc: Add support for SDHC cards
Thanks to the generous donation of an SDHC card by John Gilmore, and
the surprisingly enlightened decision by the SD Card Association to
publish useful specs, I've been able to bash out support for SDHC. The
changes are not too profound:

i) Add a card flag indicating the card uses block level addressing and
check it in the block driver. As we never took advantage of byte-level
addressing, this simply involves skipping the block -> byte
translation when sending commands.

ii) The layout of the CSD is changed - a set of fields are discarded
to make space for a larger C_SIZE. We did not reference any of the
discarded fields except those related to the C_SIZE.

iii) Read and write timeouts are fixed values and not calculated from
CSD values.

iv) Before invoking SEND_APP_OP_COND, we must invoke the new
SEND_IF_COND to inform the card we support SDHC.

Signed-off-by: Philipl Langdale <philipl@overt.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:07 +01:00
Darren Salt
9e9dc5f29f mmc: Power quirk for ENE controllers
Support for these devices was broken for 2.6.18-rc1 and later by commit
146ad66eac, which added voltage level support.

This restores the previous behaviour for these devices by ensuring that when
the voltage is changed, only one write to set the voltage is performed.

It may be that both writes are needed if the voltage is being changed between
two non-zero values or that it's safe to ensure that only one write is done
if the hardware only supports one voltage; I don't know whether either is the
case nor can I test since I have only the one SD reader (1524:0550), and it
supports just the one voltage.

Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:06 +01:00
Pierre Ossman
11354d03af mmc: let host be parent of cards
Change the parent of cards to be a specific host (a class
device), not the physical controller. This is particularly
useful when the hardware has multiple slots, meaning
multiple hosts.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:06 +01:00
Pierre Ossman
f22ee4edf6 mmc: replace host->card_busy
As card_busy was only used to indicate if the host was exclusively
claimed and not really used to identify a particular card, replacing
it with just a boolean makes things a lot more easily understandable.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:06 +01:00
Manuel Lauss
279bc44509 mmc: au1xmmc: return errors for unknown response types
au1xmmc: return error when encountering unhandled/unknown response type.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:06 +01:00
Manuel Lauss
82999770d6 mmc: au1xmmc: implement proper ro switch detection
au1xmmc: implement proper R/O switch detection.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-02-04 20:54:05 +01:00
Philip Langdale
6f949909e8 mmc: Correct definition of R6
During development of SDHC support, it was discovered that the definition
for R6 was incorrect. This patch fixes that and patches the drivers that
do switch on the response type.

Signed-off-by: Philip Langdale <philipl@overt.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pavel Pisa <ppisa@pikron.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-01-15 06:44:03 +01:00
Carlos Eduardo Aguiar
1b3b263184 omap: Update MMC response types
This patch is a fix in order to update MMC response types. This modification is
needed to allow SD card support on OMAP platforms.

Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Yuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-01-15 06:39:00 +01:00
Linus Torvalds
c70a1ce873 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  MMC: at91 mmc linkage updates
  ARM: OMAP: fix MMC workqueue changes
2007-01-10 15:55:10 -08:00
Russell King
e47c222b22 [ARM] Fix potential MMCI bug
The MMCI driver might end up aborting the initial command and leaving
the data part of the command sequence still in place.  Avoid this
problem by ensuring that any data sequence is properly cleared out
when a command completes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-08 19:49:51 +00:00
David Brownell
a26b498c96 MMC: at91 mmc linkage updates
Linker level tweaks for the AT91 MMC driver:

  - fix a wrongly-exported symbol
  - move probe() to init section
  - move remove() to exit section

When this driver is statically linked, this patch shrinks the driver's
runtime I-space footprint by over 20% (950 bytes).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-01-04 07:03:57 +01:00
Kyungmin Park
3947a3907f ARM: OMAP: fix MMC workqueue changes
fix OMAP MMC workqueue in recent workqueue change

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-01-04 07:03:38 +01:00
Andrew Victor
99eeb8dfb1 AT91 MMC update for 2.6.19
The driver is usable on the newer SAM9 processors so replace all text
references to AT91RM9200 with just AT91.

The controller bug where all the words are byte-swapped is fixed on the
AT91SAM9 processors.  The byte-swapping work-around therefore only needs
to be done if cpu_is_at91rm9200().
[Original patch from Wojtek Kaniewski]

The AT91RM9200 and AT91SAM9260 processors support two MMC/SD slots - the
slot which is connected is now passed via the platform_data and the
correct slot selected in the AT91_MCI_SDCR register.

The driver should not be calling at91_set_gpio_output() since the VCC
pin should have already been configured as an output in the
processor/board setup code.  The driver should call
at91_set_gpio_value().

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 12:43:35 +01:00
Pierre Ossman
a98087cf81 mmc: Change SDHCI iomem error to a warning
Some controllers report an invalid iomem size, but seem to work
correctly anyway. Change our current error to just a warning and
hope it doesn't cause too much problems.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:48:42 +01:00
Vitaly Wool
7b30d281b9 mmc: fix "prev->state: 2 != TASK_RUNNING??" problem on SD/MMC card removal
Currently on SD/MMC card removal the system exhibits the following message (the platform is ARM Versatile):

    prev->state: 2 != TASK_RUNNING??
    mmcqd/762[CPU#0]: BUG in __schedule at linux-2.6/kernel/sched.c:3826

(akpm: someone tried to fix this, but it's still wrong)

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:48:16 +01:00
Andrew Victor
f3a8efa90b AT91 MMC 5 : Minor cleanups
A number of small cleanups to the AT91RM9200 MMC driver:
 - fix warnings generated by pr_debug().
 - prepend "AT91 MMC:" to printk() messages.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:47:21 +01:00
Andrew Victor
df05a303e3 AT91 MMC 4 : Interrupt handler cleanup
This patch simplifies the AT91RM9200 MMC interrupt handler code so that
it doesn't re-read the Interrupt Status and Interrupt Mask registers
multiple times.

Also defined AT91_MCI_ERRORS instead of using the hard-coded 0xffff0000.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:47:12 +01:00
Andrew Victor
3dd3b039d4 AT91 MMC 3 : Move global mci_clk variable
Move the global 'mci_clk' variable into the local 'at91mci_host'
structure.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:47:02 +01:00
Andrew Victor
17ea0595f4 AT91 MMC 2 : Use platform resources
Use the I/O base-address and IRQ passed to the driver via the
platform_device resources instead of using hardcoded values.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:46:51 +01:00
Andrew Victor
e0b19b8365 AT91 MMC 1: Pass host structure.
The I/O base address is now stored in the 'at91mci_host' structure.  We
therefore have to pass this structure to at91_mci_read() and
at91_mci_write().

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-11 09:46:37 +01:00
Linus Torvalds
1709775828 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: fix au1xmmc build error
  mmc: pxamci compilation fix
2006-12-08 08:47:07 -08:00
David Howells
f0d1b0b30d [PATCH] LOG2: Implement a general integer log2 facility in the kernel
This facility provides three entry points:

	ilog2()		Log base 2 of unsigned long
	ilog2_u32()	Log base 2 of u32
	ilog2_u64()	Log base 2 of u64

These facilities can either be used inside functions on dynamic data:

	int do_something(long q)
	{
		...;
		y = ilog2(x)
		...;
	}

Or can be used to statically initialise global variables with constant values:

	unsigned n = ilog2(27);

When performing static initialisation, the compiler will report "error:
initializer element is not constant" if asked to take a log of zero or of
something not reducible to a constant.  They treat negative numbers as
unsigned.

When not dealing with a constant, they fall back to using fls() which permits
them to use arch-specific log calculation instructions - such as BSR on
x86/x86_64 or SCAN on FRV - if available.

[akpm@osdl.org: MMC fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Howells <dhowells@redhat.com>
Cc: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:51 -08:00
Linus Torvalds
ea14fad0d4 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits)
  [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked
  [ARM] 4001/1: S3C24XX: shorten reboot time
  [ARM] 3983/2: remove unused argument to __bug()
  [ARM] 4000/1: Osiris: add third serial port in
  [ARM] 3999/1: RX3715: suspend to RAM support
  [ARM] 3998/1: VR1000: LED platform devices
  [ARM] 3995/1: iop13xx: add iop13xx support
  [ARM] 3968/1: iop13xx: add iop13xx_defconfig
  [ARM] Update mach-types
  [ARM] Allow gcc to optimise arm_add_memory a little more
  [ARM] 3991/1: i.MX/MX1 high resolution time source
  [ARM] 3990/1: i.MX/MX1 more precise PLL decode
  [ARM] 3986/1: H1940: suspend to RAM support
  [ARM] 3985/1: ixp4xx clocksource cleanup
  [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2)
  [ARM] 3994/1: ixp23xx: fix handling of pci master aborts
  [ARM] 3981/1: sched_clock for PXA2xx
  [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit
  [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period
  [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter
  ...
2006-12-07 15:40:39 -08:00
David Howells
4c1ac1b491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 14:37:56 +00:00
Yoichi Yuasa
bf8c80a6a5 mmc: fix au1xmmc build error
This patch has fixed the following build error abou au1xmmc.

drivers/mmc/au1xmmc.c: In function `au1xmmc_poll_event':
drivers/mmc/au1xmmc.c:835: warning: unused variable `status'
drivers/mmc/au1xmmc.c: At top level:
drivers/mmc/au1xmmc.c:878: error: parse error before "const"
drivers/mmc/au1xmmc.c: In function `au1xmmc_probe':
drivers/mmc/au1xmmc.c:909: error: `au1xmmc_ops' undeclared (first use in this function)
drivers/mmc/au1xmmc.c:909: error: (Each undeclared identifier is reported only once
drivers/mmc/au1xmmc.c:909: error: for each function it appears in.)
drivers/mmc/au1xmmc.c: At top level:
drivers/mmc/au1xmmc.c:659: warning: 'au1xmmc_request' defined but not used
drivers/mmc/au1xmmc.c:719: warning: 'au1xmmc_set_ios' defined but not used
make[2]: *** [drivers/mmc/au1xmmc.o] Error 1
make[1]: *** [drivers/mmc] Error 2
make: *** [drivers] Error 2

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-05 09:10:30 +01:00