Commit Graph

194 Commits

Author SHA1 Message Date
Hauke Mehrtens
8ec57228c3 ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 12:46:37 -04:00
Hauke Mehrtens
e2da4bd3ec bcma/ssb: parse new attributes from sprom
These newly added attributes are used by brcmsmac. Now bcma should
parse all attributes used by brcmsmac out of the sprom.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 12:45:22 -04:00
Hauke Mehrtens
673335c8f0 ssb: fill board_rev attribute from sprom
This attribute is now used in b43 driver and should be filled for all
sprom versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 12:45:21 -04:00
Hauke Mehrtens
bf7d420b4a ssb/bcma: fill attribute alpha2 from sprom
The attribute country_code and alpha2 are two different attributes in
the sprom. country_code contains some code in an 8 bit coding and
alpha2 contains two chars with the country code. The attributes where
read out wrongly in the past and country_code is only available on
sprom version 1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 12:45:21 -04:00
Hauke Mehrtens
5a20ef3db2 ssb: remove rev from boardinfo
Previously the rev contained the revision read from the pci config
space and was used as board_rev in the wireless drivers. This is wrong
the board_rev is only fetched from the sprom accordingly to the open
source part of the Broadcom SDK and brcmsmac. This patch removes the
rev from the boardinfo structure and uses the board_rev attribute from
sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC
code.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16 12:45:20 -04:00
Linus Torvalds
3b59bf0816 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20 21:04:47 -07:00
Greg Kroah-Hartman
263a5c8e16 Merge 3.3-rc6 into driver-core-next
This was done to resolve a conflict in the drivers/base/cpu.c file.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 12:35:53 -08:00
Hauke Mehrtens
f8f8a660ba ssb: remove 5GHz antenna gain from sprom
There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom
just stores the gain values for antenna 1 and 2 or 1 to 4 for more
recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05 15:20:49 -05:00
John W. Linville
ca994a36f5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	net/mac80211/debugfs_sta.c
	net/mac80211/sta_info.h
2012-02-15 16:24:37 -05:00
Hauke Mehrtens
d486a5b499 ssb: add support for bcm5354
This patch adds support the the BCM5354 SoC.
It has a PMU and a constant not configurable clock.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:55:36 -05:00
Hauke Mehrtens
bedb2a18af ssb: log the id, rev and pkg of the chip found
This makes us see what type of hardware someone uses by the dmesg
output.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06 14:53:11 -05:00
Hauke Mehrtens
a6c84622b7 ssb: fix cardbus slot in hostmode
ssb supports one extra device on the cardbus. This results in two
devices in total, one beeing the host controller itself and the other
the external device connected to the hostcontroller over cardbus.

This makes the cardbus slot work on the Linksys WRT150N.

Reported-by: Aaron Z <aaronz@pls-net.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-01 15:26:00 -05:00
Alan Stern
f3ff924708 Remove useless get_driver()/put_driver() calls
As part of the removal of get_driver()/put_driver(), this patch
(as1512) gets rid of various useless and unnecessary calls in several
drivers.  In some cases it may be desirable to pin the driver by
calling try_module_get(), but that can be done later.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: "David S. Miller" <davem@davemloft.net>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Michael Buesch <m@bues.ch>
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-24 16:00:35 -08:00
Rafał Miłecki
b0f7029205 ssb: SPROM: extract each core power info
We already extract some basic info but it's incomplete, reads info
about the first core only. Used data structure doesn't allow easy
adding of more cores.
This patch adds new struct and array for storing power info. The plan
is to: switch all extractors (including the ones using NVRAM) to new
struct, switch drivers, then deprecate and finally drop old SSB fields.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24 14:06:04 -05:00
John W. Linville
5d22df200b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-14 14:35:41 -05:00
Rafał Miłecki
8a5ac6ecd5 ssb: extract FEM info from SPROM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13 15:30:49 -05:00
Hauke Mehrtens
329456d1ff ssb: fix init regression with SoCs
This fixes a Data bus error on some SoCs. The first fix for this
problem did not solve it on all devices.
    commit 6ae8ec2786
    Author: Rafał Miłecki <zajec5@gmail.com>
    Date:   Tue Jul 5 17:25:32 2011 +0200
        ssb: fix init regression of hostmode PCI core

In ssb_pcicore_fix_sprom_core_index() the sprom on the PCI core is
accessed, but the sprom only exists when the ssb bus is connected over
a PCI bus to the rest of the system and not when the SSB Bus is the
main system bus. SoCs sometimes have a PCI host controller and there
this code will not be executed, but there are some old SoCs with an PCI
controller in client mode around and ssb_pcicore_fix_sprom_core_index()
should not be called on these devices too. The PCI controller on these
devices are unused, but without this fix it results in an Data bus
error when it gets initialized.

Cc: Michael Buesch <m@bues.ch>
Cc: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 15:06:35 -05:00
Paul Gortmaker
1014c22e42 ssb: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE
Or we will get things like this when we remove the implicit path:

drivers/ssb/embedded.c:32: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/ssb/driver_chipcommon.c:432: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/ssb/driver_chipcommon_pmu.c:607: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
drivers/ssb/pcihost_wrapper.c:120: error: ‘THIS_MODULE’ undeclared (first use in this function)
drivers/ssb/driver_pcicore.c:721: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
drivers/ssb/driver_gige.c:249: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:08 -04:00
Paul Gortmaker
20a112d0ba ssb: Add module.h to the real modules in drivers/ssb
The header cleanup means that module.h is no longer simply
everywhere.  So real modules need to actively include it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:07 -04:00
Rafał Miłecki
04023afcce ssb: fix DMA translation for some specific boards
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24 14:41:41 -04:00
Linus Torvalds
d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Rafał Miłecki
a9770a815d ssb: return correct translation bit for 64-bit DMA
Remove b43's workarounds at the same time. Other users of
ssb_dma_translation do not support any 64-bit DMA devices, so they are
not affected.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22 09:51:12 -04:00
John W. Linville
d859898114 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
Conflicts:
	drivers/net/wireless/ath/ath5k/sysfs.c
	net/bluetooth/l2cap_core.c
	net/mac80211/wpa.c
2011-07-11 14:46:59 -04:00
Jiri Kosina
b7e9c223be Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.
2011-07-11 14:15:55 +02:00
Rafał Miłecki
6ae8ec2786 ssb: fix init regression of hostmode PCI core
Our workarounds seem to be clientmode PCI specific. Using SPROM
workaround on SoC resulted in Oops:

Data bus error, epc == 8017ed58, ra == 80225838
 Oops[#1]:
 Cpu 0
 $ 0   : 00000000 10008000 b8000000 00000001
 $ 4   : 80293b5c 00000caa ffffffff 00000000
 $ 8   : 0000000a 00000003 00000001 696d6d20
 $12   : ffffffff 00000000 00000000 ffffffff
 $16   : 802d0140 b8004800 802c0000 00000000
 $20   : 00000000 802c0000 00000000 802d04d4
 $24   : 00000018 80151a00
 $28   : 81816000 81817df8 8029bda0 80225838
 Hi    : 00000000
 Lo    : 00000000
 epc   : 8017ed58 ssb_ssb_read16+0x48/0x60
   Not tainted
 ra    : 80225838 ssb_pcicore_init+0x54/0x3b4

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-07 13:06:08 -04:00
Michael Büsch
eb032b9837 Update my e-mail address
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-07 15:18:01 +02:00
Sergei Shtylyov
115f9450ba ssb: use pci_dev->subsystem_{vendor,device}
The SSB code reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:32:54 -04:00
Sergei Shtylyov
2fa2319027 ssb: use pci_dev->revision
The SSB code reads PCI revision ID from the PCI configuration register while
it's already stored by the PCI subsystem in the 'revision' field  of 'struct
pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:32:23 -04:00
Sergei Shtylyov
304e21bbea ssb: PCI revision ID register is 8-bit wide
The SSB code reads PCI revision ID register as 16-bit entity while the register
is actually 8-bit only (the next 8 bits are the programming interface register).
Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well,
to match the register size.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05 15:26:55 -04:00
Sergei Shtylyov
ce2dd3c2d5 ssb: use pci_dev->revision
The bus scan code reads PCI revision ID from the PCI configuration register
while it's already stored by PCI subsystem in the 'revision' field of 'struct
pci_dev'...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:40 -04:00
Hauke Mehrtens
e913d46830 ssb: fix ssb clock rate according to broadcom source
This fix was done according to si_clock_rate function in broadcom siutils.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27 15:09:39 -04:00
Hauke Mehrtens
cd15598707 ssb: add __devinit to some functions
Two functions in ssb are using register_pci_controller() which is
__devinit. The functions ssb_pcicore_init_hostmode() and
ssb_gige_probe() should also be __devinit.

This fixes the following warning:
WARNING: vmlinux.o(.text+0x2727b8): Section mismatch in reference from the function ssb_pcicore_init_hostmode() to the function .devinit.text:register_pci_controller()
The function ssb_pcicore_init_hostmode() references
the function __devinit register_pci_controller().
This is often because ssb_pcicore_init_hostmode lacks a __devinit
annotation or the annotation of register_pci_controller is wrong.

WARNING: vmlinux.o(.text+0x273398): Section mismatch in reference from the function ssb_gige_probe() to the function .devinit.text:register_pci_controller()
The function ssb_gige_probe() references
the function __devinit register_pci_controller().
This is often because ssb_gige_probe lacks a __devinit
annotation or the annotation of register_pci_controller is wrong.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:58 -04:00
Connor Hansen
eb40e3e8bb drivers/ssb/driver_chipcommon_pmu.c: uninitilized warning
warning message
drivers/ssb/driver_chipcommon_pmu.c: In function ssb_pmu_resources_init
drivers/ssb/driver_chipcommon_pmu.c:420:15: warning: updown_tab_size may
be used uninitilized in this function.

updown_tab_size and depend_tab_size may not be set in the bus->chip_id
switch statement, so set to 0 by default to avoid using uninitialized
stack space.

Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17 14:22:17 -04:00
Rafał Miłecki
bdf492f502 ssb: fix PCI(e) driver regression causing oops on PCI cards
We were incorrectly executing PCIe specific workarounds on PCI cards.
This resulted in:
Machine check in kernel mode.
Caused by (from SRR1=149030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-03 14:19:49 -04:00
Linus Torvalds
06f4e926d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.
2011-05-20 13:43:21 -07:00
Hauke Mehrtens
b3ae52b6b0 SSB: Change fallback sprom to callback mechanism.
Some embedded devices like the Netgear WNDR3300 have two SSB based cards
without an own sprom on the pci bus. We have to provide two different
fallback sproms for these and this was not possible with the old solution.
In the bcm47xx architecture the sprom data is stored in the nvram in the
main flash storage. The architecture code will be able to fill the sprom
with the stored data based on the bus where the device was found.

The bcm63xx code should do the same thing as before, just using the new
API.

Acked-by: Michael Buesch <mb@bu3sch.de>
Cc: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2362/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
John W. Linville
e00cf3b9eb Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-agn-tx.c
	net/mac80211/sta_info.h
2011-05-16 19:32:19 -04:00
John W. Linville
1159024d4c ssb: fix pcicore build breakage
drivers/ssb/main.c:1336: error: 'SSB_PCICORE_BCAST_ADDR' undeclared (first use in this function)
drivers/ssb/main.c:1337: error: 'SSB_PCICORE_BCAST_DATA' undeclared (first use in this function)
drivers/ssb/main.c:1349: error: 'struct ssb_pcicore' has no member named 'dev'

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-13 15:05:46 -04:00
Rafał Miłecki
8576f815d5 ssb: move ssb_commit_settings and export it
Commiting settings is possible on devices without PCI core (but with CC
core). Export it for usage in drivers supporting other cores.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11 14:50:41 -04:00
Rafał Miłecki
9fcce61c0e ssb: update list of devices supporting multiple 80211 cores
Some of the BCM43xx chips contain cores that are attached to the SSB, but are
inactive as they do not connect to the external environment. These must not be
registered. Several of these types are handled in driver ssb; however, the
specific case of an inactive 802.11 cores is now treated in b43 and b43legacy.
Although the current setup works, this minor change will place all such
workarounds in ssb, and simplify the code in drivers b43 and b43legacy.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11 10:17:17 -04:00
John W. Linville
a70171dce9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/libertas/if_cs.c
	drivers/net/wireless/rtlwifi/pci.c
	net/bluetooth/l2cap_sock.c
2011-05-05 13:32:35 -04:00
Rafał Miłecki
0ca699552c ssb: cc: prepare clockmode support for cores rev 10+
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-02 14:49:14 -04:00
Rafał Miłecki
af335a6cbc ssb: pci: early fix for SPROM core index
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28 14:53:22 -04:00
Rafał Miłecki
5890a3ca34 ssb: pci: update PCIe workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28 14:53:22 -04:00
Rafał Miłecki
6e914101d4 ssb: pci: separate workarounds
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28 14:53:21 -04:00
Rafał Miłecki
04ad1fb264 ssb: update reject bit for Target State Low
My 14e4:4315 is SSB_IDLOW_SSBREV_26:
read32 0xfaafcff8 -> 0x600422d5
My 14e4:4328 is SSB_IDLOW_SSBREV_24:
read32 0xfaafcff8 -> 0x400422c5
My 14e4:432b is SSB_IDLOW_SSBREV_26 again:
read32 0xfaafcff8 -> 0x600422d5

For all of them wl driver is using 0x2 reject bit:
write32(0xf98) <- 0x00010002
So it seems SSB 2.3 is the exception using another bit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26 15:50:29 -04:00
Rafał Miłecki
a6ef814383 ssb: mark bus as powered up earlier
ssb_chipco_set_clockmode may want to touch CC registers to control power of the
bus. However touching registers without powered_up set causes warnings.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26 15:50:29 -04:00
Rafał Miłecki
9835a30e98 ssb: cc: clear GPIOPULL registers on init
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:20 -04:00
Rafał Miłecki
3c35c84a70 ssb: cc: use correct min_msk for 0x4312
Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow
specs and wl (noticed in MMIO dumps).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00
Rafał Miłecki
9be1cb39c6 ssb: pci: trivial: correct amount of maximum retries
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00