This patch gathers all the struct flock64 definitions (and the operations),
puts them under !CONFIG_64BIT and cleans up the arch files.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch just gathers together all the struct flock definitions except
xtensa into asm-generic/fcntl.h.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch puts the most popular of each fcntl operation/flag into
asm-generic/fcntl.h and cleans up the arch files.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch puts the most popular of each open flag into asm-generic/fcntl.h
and cleans up the arch files.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These two files are basically identical, so make one just include the other
(protecting the 32-bit-only parts with __powerpc64__). Also remove some
completely unused defines.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This set of patches creates asm-generic/fcntl.h and consolidates as much as
possible from the asm-*/fcntl.h files into it.
This patch just gathers all the identical bits of the asm-*/fcntl.h files into
asm-generic/fcntl.h.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While installing Debian on our new IBM X41 Tablet, I tried briefly to use
the built-in Atmel TPM. The Athmel TPM is also located on the LPC-bus of
the ICH6. To make it work I had to apply the following patch:
Signed-off-by: Philipp Matthias Hahn <pmhahn@titan.lahn.de>
Acked-by: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here's a small warning fix for drivers/isdn/i4l/isdn_v110.c
drivers/isdn/i4l/isdn_v110.c:523: warning: `ret' might be used uninitialized in this function
In addition to Karsten Keil signing off on the patch, Thomas Pfeiffer also
commented on the patch, saying
"initializing ret with the value zero is correct and should be done."
Please apply.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The HPET driver is using a parts per second drift factor instead of the
standard parts per million drift the time interpolator code expects. This
patch fixes that problem and updates the URL for the HPET spec.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "Robert W. Picco" <bob.picco@hp.com>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Based on a patch from Andr Pereira de Almeida <andre@cachola.com.br>
It might be possible for the saved pointer (*p) to become invalid in
between vc_resizes, so saving the screen offset instead of the screen
pointer is saner.
This bug is very hard to trigger though, but Andre probably did, if he's
submitting this patch. Anyway, with Andre's patch, it's still possible for
the offsets to be still illegal, if the new screen size is smaller than the
old one. So I've also added checks if the offsets are still within the
screenbuffer size.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I've rewriten Atushi's fix for the 64-bit put_unaligned on 32-bit systems
bug to generate more efficient code.
This case has buzilla URL http://bugzilla.kernel.org/show_bug.cgi?id=5138.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The file `fs/umsdos/notes' contains only a small note about a possible bug
involving verify_area(). Since umsdos is no longer in the kernel and
verify_area() is also gone, it seems to make sense that this file goes the way
of the Dodo.
After applying this patch the `fs/umsdos/' directory will be empty and can be
removed entirely.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove (or edit) remaining references to the now dead verify_area() function
from files in Documentation/.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove a redundant fifo_poll() abstraction from fs/pipe.c and adds a big
fat comment stating we set POLLERR for FIFOs too on Linux unlike most
Unices.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
asm/segment.h varies greatly on different architectures but is clearly
deprecated. Removing all non-architecture consumers will make it easier
for us to get ride of asm/segment.h all together.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Per-queue parameters should be updated using the appropriate blk_queue_xxx
functions.
Signed-off-by: Stuart McLaren <stuart.mclaren@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up a commonly repeated set of changes to the NTP state
variables by adding two helper inline functions:
ntp_clear(): Clears the ntp state variables
ntp_synced(): Returns 1 if the system is synced with a time server.
This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc,
sparc64.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark variables which are usually accessed for reads with __readmostly.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch cleans up the error path of futex_fd() by removing duplicate
code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
posix_timer_event() first checks that the thread (SIGEV_THREAD_ID case)
does not have PF_EXITING flag, then it calls send_sigqueue() which locks
task list. But if the thread exits in between the kernel will oops
(->sighand == NULL after __exit_sighand).
This patch moves the PF_EXITING check into the send_sigqueue(), it must be
done atomically under tasklist_lock. When send_sigqueue() detects exiting
thread it returns -1. In that case posix_timer_event will send the signal
to thread group.
Also, this patch fixes task_struct use-after-free in posix_timer_event.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Every time cramfs_lookup() is called to lookup and inode for a dentry,
get_cramfs_inode() will allocate a new inode without checking to see if that
inode already exists in the inode cache.
This is fine the first time, but if the dentry cache entry(ies) associated
with that inode are aged out, but the inode entry is not aged out (which can
be quite common if the inode has buffer cache linked to it), cramfs_lookup()
will be called again and another inode will be allocated and added to the
inode cache creating a duplicate in the inode cache.
The big issue here is that the buffers associated with each inode cache entry
are not shared between the duplicates!
The older inode entries are now orphaned as no dentry points to it and won't
be freed until the buffer cache assoicated with them are first freed. The
newest entry will have to create all new buffer cache for each part of its
file as the old buffer cache is now orphaned as well.
Patch below fixes this by making get_cramfs_inode() use the inode cache before
blindly creating a new entry every time. This eliminates the duplicate inodes
and duplicate buffer cache.
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The second arg of do_timer_interrupt() is not used in the functions, and
all callers pass NULL.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Paul Mundt <lethal@Linux-SH.ORG>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
struct file cleanup: f_maxcount has an unique value (INT_MAX). Just use
the hard-wired value.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch removes a redundant variable `sig' from sys_prctl().
For some reason, when sys_prctl is called with option == PR_SET_PDEATHSIG
then the value of arg2 is assigned to an int variable named sig. Then sig
is tested with valid_signal() and later used to set the value of
current->pdeath_signal .
There is no reason to use this intermediate variable since valid_signal()
takes a unsigned long argument, so it can handle being passed arg2
directly, and if the call to valid_signal is OK, then we know the value of
arg2 is in the range zero to _NSIG and thus it'll easily fit in a plain int
and thus there's no problem assigning it later to current->pdeath_signal
(which is an int).
The patch gets rid of the pointless variable `sig'.
This reduces the size of kernel/sys.o in 2.6.13-rc6-mm1 by 32 bytes on my
system.
Patch has been compile tested, boot tested, and just to make damn sure I
didn't break anything I wrote a quick test app that calls
prctl(PR_SET_PDEATHSIG ...) with the entire range of values for a
unsigned long, and it behaves as expected with and without the patch.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In update_atime(), timespec_equal() test is done twice in succession and
the second is always false. This patch removes the second test.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a problem in the accounting subsystem in the kernel can not
correctly handle files larger than 2GB. The output file containing the
process accounting data can grow very large if the system is large enough
and active enough. If the 2GB limit is reached, then the system simply
stops storing process accounting data.
Another annoying problem is that once the system reaches this 2GB limit,
then every process which exits will receive a signal, SIGXFSZ. This signal
is generated because an attempt was made to write beyond the limit for the
file descriptor. This signal makes it look like every process has exited
due to a signal, when in fact, they have not.
The solution is to add the O_LARGEFILE flag to the list of flags used to
open the accounting file. The rest of the accounting support is already
largefile safe.
The changes were tested by constructing a large file (just short of 2GB),
enabling accounting, and then running enough commands to cause the
accounting data generated to increase the size of the file to 2GB. Without
the changes, the file grows to 2GB and the last command run in the test
script appears to exit due a signal when it has not. With the changes,
things work as expected and quietly.
There are some user level changes required so that it can deal with
largefiles, but those are being handled separately.
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The main Makefile is already adding -g to the CFLAGS if
CONFIG_DEBUG_INFO=y.
Not that two -g would do harm, but one works as well.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch simplifies the usage of do_notify_parent_cldstop(), it lessens
the source and .text size slightly, and makes the code (in my opinion) a
bit more readable.
I am sending this patch now because I'm afraid Paul will touch
do_notify_parent_cldstop() really soon, It's better to cleanup first.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I've had WARN_CONSOLE_UNLOCKED warnings when calling TIOCLINUX
TIOCL_BLANKSCREEN and TIOCL_UNBLANKSCREEN.
(I'm blind and I use a braille display. I use those functions to blank my
laptop's screen so people don't read it, and hopefully to conserve power.)
The warnings are from these places:
do_blank_screen at drivers/char/vt.c:2754 (Not tainted)
save_screen at drivers/char/vt.c:575 (Not tainted)
do_unblank_screen at drivers/char/vt.c:2822 (Not tainted)
set_palette at drivers/char/vt.c:2908 (Not tainted)
At a glance I would think the following patch ought to fix that. Tested on
one machine. Could you please tell me if this is correct and/or forward
the patch where appropriate...
Signed-off-by: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Patch to clean up missing overflow check in get_blkdev_list. The printf
which adds the "Block Devices" string in /proc/devices can overflow the
presented page if get_chrdev_list eats up the entire 4k space.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is no do_nanosleep function so kill it's declaration in <linux/time.h>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The phy status register must be read twice in order to get the actual link
state.
Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
unused and useless..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The i386 OProfile code has a function named nmi_exit(), which collides with
the nmi_exit() macro in linux/hardirq.h. At the moment, we get away with
it, because hardirq.h isn't included in the oprofile code. I hit this as a
bug when working with a patch which (indirectly) adds a #include of
hardirq.h to oprofile.
Regardless, the name collision is probably not a good idea, so this patch
fixes it, renaming the oprofile function to op_nmi_exit(). It also renames
the nmi_init() and nmi_timer_init() functions similarly, for consistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
IRQ_PER_CPU is not used by all architectures. This patch introduces the
macros ARCH_HAS_IRQ_PER_CPU and CHECK_IRQ_PER_CPU() to avoid the generation
of dead code in __do_IRQ().
ARCH_HAS_IRQ_PER_CPU is defined by architectures using IRQ_PER_CPU in their
include/asm_ARCH/irq.h file.
Through grepping the tree I found the following architectures currently use
IRQ_PER_CPU:
cris, ia64, ppc, ppc64 and parisc.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Frank Sorenson <frank@tuxrocks.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes prototypes for the generic_file_open and
generic_file_llseek functions.
Besides being superfluous because they are already present in fs.h, they
were also wrong because the actual functions aren't weak functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch contains the following updates to the help texts:
- QUOTA: most people will get the quota utilities from their
distribution, and if not the mini-HOWTO will tell them
- QFMT_V2: quota utilities 3.01 are no longer recent, they are now
ancient
and 3.01 is lower than the minimal version documented in
Documentation/Changes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This interface is said to be commonly used in germany: "The patch has been
proven to work fine in a beige G3 Mac."
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=262324
Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
cleanup of deadline_dispatch_requests():
- replace drq selection with hopefully clearer while semantically the
same construct: take write request, if there is any, otherwise take read
one, or NULL if none exist.
- kill unused other_dir.
Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since early userspace was added, there's no way to override which init to
run from it. Some people tack on an extra cpio archive with a link from
/init depending on what they want to run, but that's sometimes impractical.
Changing the "init=" to also override the early userspace isn't feasible,
since it is still used to indicate what init to run from disk when early
userspace has completed doing whatever it's doing (i.e. load filesystem
modules and drivers).
Instead, introduce "rdinit=" and make it override the default "/init" if
specified.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes bug titled "sunrpc as module and bad proc/sys link count"
reported by Jiri Slaby.
The problem was, that only proc_dir_entry->nlink was updated and the
corresponding inode->i_nlink was not. The fix is to implement the
inode->getattr() method, and update i_nlink (if necessary).
A quick audit of proc code shows that no other attribute changes after
creation.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With "-W -Wno-unused -Wno-sign-compare" I get the following compile warning:
CC kernel/workqueue.o
kernel/workqueue.c: In function `workqueue_cpu_callback':
kernel/workqueue.c:504: warning: ordered comparison of pointer with integer zero
On error create_workqueue_thread() returns NULL, not negative pointer, so
following trivial patch suggests itself.
Signed-off-by: Mika Kukkonen <mikukkon@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add fsnotify_xattr() hook to removexattr().
Signed-off-by: Robert Love <rml@novell.com>
Signed-off-by: John McCtuchan <ttb@tentacle.dhs.org>
Cc: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds the Dell Systems Management Base Driver with sysfs support.
This driver has been tested with Dell OpenManage.
Signed-off-by: Doug Warzecha <Douglas_Warzecha@dell.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Upgrade the request_firmware_nowait function to not start the hotplug
action on a firmware update.
This patch is tested along with dell_rbu driver on i386 and x86-64 systems.
Signed-off-by: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
This speeds up directory reads for large FAT partitions, if the buffercache
has to be filled from the drive. Following values were taken from:
$ time find path_to_freshly_mounted_fat > /dev/null
on an otherwise idle system.
FAT with 16KB Clusters on IDE attached drive: Factor 2
FAT with 32KB Clusters on USB2 attached drive: Factor 10 (!)
Its less than 1/10 slower, if the buffercache is uptodate.
The patch introduces the new function fat_dir_readahead().
fat_dir_readahead() calls sb_breadahead() to readahead a whole cluster,
if the requested sector is the first one in a cluster.
It is usefull to do this, because on FAT directories occupy whole
clusters, with the exception of FAT12/FAT16 root dirs.
Readahead is only done, if the cluster's first sector is not uptodate
to avoid overhead, when the buffer cache is already uptodate.
Note that under memory pressure, the maximal byte count wasted
(read: has to be red from disk twice) is 1 cluster's size. Thats 64KB.
fat_dir_readahead() is called from fat__get_entry().
There is also an unrelated cleanup at one spot:
if (bh)
brelse(bh);
is replaced with:
brelse(bh);
brelse() can handle NULL pointer arguments by itself.
Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
