Commit Graph

102 Commits

Author SHA1 Message Date
Harvey Harrison
66bef8c059 PCI: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:09 -07:00
Shaohua Li
7d715a6c1a PCI: add PCI Express ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.

This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
        -default, BIOS default setting
        -powersave, highest power saving mode, enable all available ASPM
state and clock power management
        -performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.

In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.

Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:03 -07:00
Andrew Morton
49741c4d01 PCI: revert "pcie: utilize pcie transaction pending bit"
Revert as it is reported to cause problems for people.

commit 4348a2dc49
Author: Shaohua Li <shaohua.li@intel.com>
Date:   Wed Oct 24 10:45:08 2007 +0800

    pcie: utilize pcie transaction pending bit

    PCIE has a mechanism to wait for Non-Posted request to complete. I think
    pci_disable_device is a good place to do this.

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Due to the regression reported at
http://bugzilla.kernel.org/show_bug.cgi?id=10065

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Soeren Sonnenburg <kernel@nn7.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:38:44 -07:00
Rafael J. Wysocki
3a2d5b7001 PM: Introduce PM_EVENT_HIBERNATE callback state
During the last step of hibernation in the "platform" mode (with the
help of ACPI) we use the suspend code, including the devices'
->suspend() methods, to prepare the system for entering the ACPI S4
system sleep state.

But at least for some devices the operations performed by the
->suspend() callback in that case must be different from its operations
during regular suspend.

For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and
pass it to the device drivers' ->suspend() methods during the last phase
of hibernation, so that they can distinguish this case and handle it as
appropriate.  Modify the drivers that handle PM_EVENT_SUSPEND in a
special way and need to handle PM_EVENT_HIBERNATE in the same way.

These changes are necessary to fix a hibernation regression related
to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 10:40:04 -08:00
FUJITA Tomonori
59fc67dedb iommu sg merging: PCI: add dma segment boundary support
This adds PCI's accessor for segment_boundary_mask in device_dma_parameters.

The default segment_boundary is set to 0xffffffff, same to the block layer's
default value (and the scsi mid layer uses the same value).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:12 -08:00
FUJITA Tomonori
4d57cdfaca iommu sg merging: PCI: add device_dma_parameters support
This adds struct device_dma_parameters in struct pci_dev and properly
sets up a pointer in struct device.

The default max_segment_size is set to 64K, same to the block layer's
default value.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Mostly-acked-by: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:10 -08:00
Greg Kroah-Hartman
cc3a1378b4 Revert "PCI: PCIE ASPM support"
This reverts commit 6c723d5bd8.

It caused build errors on non-x86 platforms, config file confusion, and
even some boot errors on some x86-64 boxes.  All around, not quite ready
for prime-time :(

Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02 11:32:01 -08:00
Linus Torvalds
215e871aaa Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits)
  PCI: make pci_bus a struct device
  PCI: fix codingstyle issues in include/linux/pci.h
  PCI: fix codingstyle issues in drivers/pci/pci.h
  PCI: PCIE ASPM support
  PCI: Fix fakephp deadlock
  PCI: modify SB700 SATA MSI quirk
  PCI: Run ACPI _OSC method on root bridges only
  PCI ACPI: AER driver should only register PCIe devices with _OSC
  PCI ACPI: Added a function to register _OSC with only PCIe devices.
  PCI: constify function pointer tables
  PCI: Convert drivers/pci/proc.c to use unlocked_ioctl
  pciehp: block new requests from the device before power off
  pciehp: workaround against Bad DLLP during power off
  pciehp: wait for 1000ms before LED operation after power off
  PCI: Remove pci_enable_device_bars() from documentation
  PCI: Remove pci_enable_device_bars()
  PCI: Remove users of pci_enable_device_bars()
  PCI: Add pci_enable_device_{io,mem} intefaces
  PCI: avoid save the same type of cap multiple times
  PCI: correctly initialize a structure for pcie_save_pcix_state()
  ...
2008-02-02 14:29:33 +11:00
Shaohua Li
6c723d5bd8 PCI: PCIE ASPM support
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.

This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
        -default, BIOS default setting
        -powersave, highest power saving mode, enable all available ASPM
state
and clock power management
        -performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.

In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:30 -08:00
Benjamin Herrenschmidt
7cbe5b6005 PCI: Remove pci_enable_device_bars()
Now that all in-tree users are gone, this removes pci_enable_device_bars()
completely.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:28 -08:00
Benjamin Herrenschmidt
b718989da7 PCI: Add pci_enable_device_{io,mem} intefaces
The pci_enable_device_bars() interface isn't well suited to PCI
because you can't actually enable/disable BARs individually on
a device. So for example, if a device has 2 memory BARs 0 and 1,
and one of them (let's say 1) has not been successfully allocated
by the firmware or the kernel, then enabling memory decoding
shouldn't be permitted for the entire device since it will decode
whatever random address is still in that BAR 1.

So a device must be either fully enabled for IO, for Memory, or
for both. Not on a per-BAR basis.

This provides two new functions, pci_enable_device_io() and
pci_enable_device_mem() to replace pci_enable_device_bars(). The
implementation internally builds a BAR mask in order to be able
to use existing arch infrastructure.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Shaohua Li
017fc480cc PCI: avoid save the same type of cap multiple times
Avoid adding the same type of cap multiple times, otherwise we will see dead loop.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Shaohua Li
ec0a3a27fb PCI: correctly initialize a structure for pcie_save_pcix_state()
save_state->cap_nr should be correctly set, otherwise we can't find the
saved cap at resume.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Shaohua Li
f34303de9e PCI: fix typo in pci_save_pcix_state
pci_save/store_state has multiple bugs, which will cause cap can't be
saved/restored correctly. Below 3 patches fix them.


fix the typo in pci_save_pcix_state

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:27 -08:00
Shaohua Li
4348a2dc49 pcie: utilize pcie transaction pending bit
PCIE has a mechanism to wait for Non-Posted request to complete. I think
pci_disable_device is a good place to do this.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Adrian Bunk
ad668599f2 PCI: make pci_restore_bars() static
This patch makes the needlessly global pci_restore_bars() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:18 -08:00
Tejun Heo
b95d58eaf2 pci: allow multiple calls to pcim_enable_device()
There's no reason not to allow multiple calls to pcim_enable_device().
Calls after the first one can simply be noop.  All PCI resources will
be released when the initial pcim_enable_device() resource is
released.

This allows more flexibility to managed PCI users.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-01 12:26:44 -05:00
Al Viro
b4482a4b2e more trivial signedness fixes in drivers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:52 -07:00
Jeff Garzik
32a2eea795 PCI: Add 'nodomains' boot option, and pci_domains_supported global
* Introduce pci_domains_supported global, hardcoded to zero if
  !CONFIG_PCI_DOMAINS.

* Introduce 'nodomains' boot option, which clears pci_domains_supported
  on platforms that enable it by default (x86, x86-64, and others when
  they are converted to use this).

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:18 -07:00
Randy Dunlap
7f78576366 pci: implement "pci=noaer"
For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users
to disable PCIE Advanced Error Reporting by using "pci=noaer" on the
kernel command line.

This can be used to work around hardware or (kernel) software problems.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:17 -07:00
vignesh babu
229f5afded PCI: is_power_of_2 in drivers/pci/pci.c
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n)

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Tejun Heo
0b62e13b5c pci: rename __pci_reenable_device() to pci_reenable_device()
Rename __pci_reenable_device() to pci_reenable_device().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01 10:00:56 -04:00
Randy Dunlap
42e61f4adb kernel-doc fixes for PCI and drivers/base/
Fix undocumented function parameters in PCI and drivers/base.

Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-30 14:25:12 -07:00
Linus Torvalds
a4fb2122f1 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops
2007-07-25 11:28:00 -07:00
Tejun Heo
f0a664bbd1 PCI: export __pci_reenable_device()
Some odd ACPI implementations choke if certain controller is disabled
when ACPI suspend is invoked but we still need to make sure the PCI
device is enabled during resume.  Simply using pci_enable_device()
unbalances device enable count.  Export __pci_reenable_device().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-24 16:55:01 -04:00
Shaohua Li
ab826ca4cf ACPI: Use ACPI methods to select PCI device suspend state
applied after Rafel's 'PM: Update global suspend and hibernation
operations framework' patch set

Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22 04:18:32 -04:00
Andrew Lunn
cca03dec2f PCI: pci_set_power_state(): check for PM capabilities earlier
Check for PCI_CAP_ID_PM before checking the device state.  Apparently fixes
some log spam via the 3c59x driver.

Signed-off-by: Andrew Lunn <andrew.lunn@ascom.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:12 -07:00
Randy Dunlap
694625c0b3 PCI: add pci_try_set_mwi
As suggested by Andrew, add pci_try_set_mwi(), which does not require
return-value checking.

- add pci_try_set_mwi() without __must_check
- make it return 0 on success, errno if the "try" failed or error
- review callers

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Andrew Morton
b7b095c154 PCI: pci-x-pci-express-read-control-interfaces cleanups
- remove unneeded local

- 80-col fix

Cc: Peter Oruba <peter.oruba@amd.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Peter Oruba
d556ad4bbe PCI: add PCI-X/PCI-Express read control interfaces
This patch introduces an interface to read and write PCI-X / PCI-Express 
maximum read byte count values from PCI config space. There is a second 
function that returns the maximum _designed_ read byte count, which marks the 
maximum value for a device, since some drivers try to set MMRBC to the 
highest allowed value and rely on such a function.

Based on patch set by Stephen Hemminger <shemminger@linux-foundation.org>

Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Peter Oruba <peter.oruba@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Sam Ravnborg
96bde06a2d pci: do not mark exported functions as __devinit
Functions marked __devinit will be removed after kernel init.  But being
exported they are potentially called by a module much later.

So the safer choice seems to be to keep the function even in the non
CONFIG_HOTPLUG case.

This silence the follwoing section mismatch warnings:
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_device from __ksymtab_gpl between '__ksymtab_pci_bus_add_device' (at offset 0x20) and '__ksymtab_pci_walk_bus'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_create_bus from __ksymtab_gpl between '__ksymtab_pci_create_bus' (at offset 0x40) and '__ksymtab_pci_stop_bus_device'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_max_busnr from __ksymtab_gpl between '__ksymtab_pci_bus_max_busnr' (at offset 0xc0) and '__ksymtab_pci_assign_resource_fixed'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_claim_resource from __ksymtab_gpl between '__ksymtab_pci_claim_resource' (at offset 0xe0) and '__ksymtab_pcie_port_bus_type'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_add_devices from __ksymtab between '__ksymtab_pci_bus_add_devices' (at offset 0x70) and '__ksymtab_pci_bus_alloc_resource'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_scan_bus_parented from __ksymtab between '__ksymtab_pci_scan_bus_parented' (at offset 0x90) and '__ksymtab_pci_root_buses'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_assign_resources from __ksymtab between '__ksymtab_pci_bus_assign_resources' (at offset 0x4d0) and '__ksymtab_pci_bus_size_bridges'
WARNING: drivers/built-in.o - Section mismatch: reference to .init.text:pci_bus_size_bridges from __ksymtab between '__ksymtab_pci_bus_size_bridges' (at offset 0x4e0) and '__ksymtab_pci_setup_cardbus'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Randy Dunlap
8d7d86e9bd PCI: kernel-doc fix
Warning(linux-2621-rc3g7/drivers/pci/pci.c:1283): No description found for parameter 'dev'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:35 -07:00
Brian King
f7bdd12d23 pci: New PCI-E reset API
Adds a new API which can be used to issue various types
of PCI-E reset, including PCI-E warm reset and PCI-E hot reset.
This is needed for an ipr PCI-E adapter which does not properly
implement BIST. Running BIST on this adapter results in PCI-E
errors. The only reliable reset mechanism that exists on this
hardware is PCI Fundamental reset (warm reset). Since driving
this type of reset is architecture unique, this provides the
necessary hooks for architectures to add this support.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:34 -07:00
David Brownell
075c177152 define platform wakeup hook, use in pci_enable_wake()
This defines a platform hook to enable/disable a device as a wakeup event
source.  It's initially for use with ACPI, but more generally it could be used
whenever enable_irq_wake()/disable_irq_wake() don't suffice.

The hook is called -- if available -- inside pci_enable_wake(); and the
semantics of that call are enhanced so that support for PCI PME# is no longer
needed.  It can now work for devices with "legacy PCI PM", when platform
support allows it.  (That support would use some board-specific signal for for
the same purpose as PME#.)

[akpm@linux-foundation.org: Make it compile with CONFIG_PM=n]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:33 -07:00
Eric W. Biederman
9f35575dfc [PATCH] pci: Repair pci_save/restore_state so we can restore one save many times.
Because we do not reserve space for the pci-x and pci-e state in struct
pci dev we need to dynamically allocate it.  However because we need
to support restore being called multiple times after a single save
it is never safe to free the buffers we have allocated to hold the
state.

So this patch modifies the save routines to first check to see
if we have already allocated a state buffer before allocating
a new one.  Then the restore routines are modified to not free
the state after restoring it.  Simple and it fixes some subtle
error path handling bugs, that are hard to test for.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-12 16:31:50 -07:00
Eric W. Biederman
392ee1e6dd [PATCH] msi: Safer state caching.
There are two ways pci_save_state and pci_restore_state are used.  As
helper functions during suspend/resume, and as helper functions around
a hardware reset event.  When used as helper functions around a hardware
reset event there is no reason to believe the calls will be paired, nor
is there a good reason to believe that if we restore the msi state from
before the reset that it will match the current msi state.  Since arch
code may change the msi message without going through the driver, drivers
currently do not have enough information to even know when to call
pci_save_state to ensure they will have msi state in sync with the other
kernel irq reception data structures.

It turns out the solution is straight forward, cache the state in the
existing msi data structures (not the magic pci saved things) and
have the msi code update the cached state each time we write to the hardware.
This means we never need to read the hardware to figure out what the hardware
state should be.

By modifying the caching in this manner we get to remove our save_state
routines and only need to provide restore_state routines.

The only fields that were at all tricky to regenerate were the msi and msi-x
control registers and the way we regenerate them currently is a bit dependent
upon assumptions on how we use the allow msi registers to be configured and used
making the code a little bit brittle.  If we ever change what cases we allow
or how we configure the msi bits we can address the fragility then.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-12 16:31:50 -07:00
Tejun Heo
7f375f325f PCI: allow multiple calls to pcim_pin_device()
Sanity check in pcim_pin_device() was too restrictive in that it didn't
allow multiple calls to the function, which is against the devres
philosohpy of fire-and-forget.  Track pinned status separately and allow
pinning multiple times.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-09 15:36:30 -08:00
Eric W. Biederman
f5f2b13129 [PATCH] msi: sanely support hardware level msi disabling
In some cases when we are not using msi we need a way to ensure that the
hardware does not have an msi capability enabled.  Currently the code has been
calling disable_msi_mode to try and achieve that.  However disable_msi_mode
has several other side effects and is only available when msi support is
compiled in so it isn't really appropriate.

Instead this patch implements pci_msi_off which disables all msi and msix
capabilities unconditionally with no additional side effects.

pci_disable_device was redundantly clearing the bus master enable flag and
clearing the msi enable bit.  A device that is not allowed to perform bus
mastering operations cannot generate intx or msi interrupt messages as those
are essentially a special case of dma, and require bus mastering.  So the call
in pci_disable_device to disable msi capabilities was redundant.

quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:50 -08:00
Atsushi Nemoto
4516a618a7 PCI: Make CARDBUS_MEM_SIZE and CARDBUS_IO_SIZE boot options
CARDBUS_MEM_SIZE was increased to 64MB on 2.6.20-rc2, but larger size might
result in allocation failure for the reserving itself on some platforms
(for example typical 32bit MIPS).  Make it (and CARDBUS_IO_SIZE too)
customizable by "pci=" option for such platforms.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Randy Dunlap
f95d882d81 PCI/sysfs/kobject kernel-doc fixes
Fix kernel-doc warnings in PCI, sysfs, and kobject files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:30:10 -08:00
Tejun Heo
9ac7849e35 devres: device resource management
Implement device resource management, in short, devres.  A device
driver can allocate arbirary size of devres data which is associated
with a release function.  On driver detach, release function is
invoked on the devres data, then, devres data is freed.

devreses are typed by associated release functions.  Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function.  Both usages are
supported.

devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).

This patch adds devres core including documentation and the following
managed interfaces.

* alloc/free	: devm_kzalloc(), devm_kzfree()
* IO region	: devm_request_region(), devm_release_region()
* IRQ		: devm_request_irq(), devm_free_irq()
* DMA		: dmam_alloc_coherent(), dmam_free_coherent(),
		  dmam_declare_coherent_memory(), dmam_pool_create(),
		  dmam_pool_destroy()
* PCI		: pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap		: devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
		  devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
		  pcim_iomap(), pcim_iounmap()

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 17:39:36 -05:00
Michael Ellerman
8fed4b6523 MSI: Combine pci_(save|restore)_msi/msix_state
The PCI save/restore code doesn't need to care about MSI vs MSI-X, all
it really wants is to say "save/restore all MSI(-X) info for this device".

This is borne out in the code, we call the MSI and MSI-X save routines
side by side, and similarly with the restore routines.

So combine the MSI/MSI-X routines into pci_save_msi_state() and
pci_restore_msi_state(). It is up to those routines to decide what state
needs to be saved.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Pavel Machek
e36c455c2f PCI: power management: remove noise on non-manageable hw
Return early from pci_set_power_state() if hardware does not support
power management. This way, we do not generate noise in the logs.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Adrian Bunk
8255cf35d5 PCI: make isa_bridge Alpha-only
Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, 
there's no reason for providing it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Adrian Bunk
c30ca1db39 PCI: quirks.c: cleanup
This patch contains the following cleanups:
- move all EXPORT_SYMBOL's directly below the code they are exporting
- move all DECLARE_PCI_FIXUP_*'s directly below the functions they
  are calling

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Hidetoshi Seto
c87deff776 PCI : Add selected_regions funcs
This patch adds the following changes into generic PCI code especially
for PCI legacy I/O port free drivers.

     - Added new pci_request_selected_regions() and
       pci_release_selected_regions() for PCI legacy I/O port free
       drivers in order to request/release only the selected regions.

     - Added helper routine pci_select_bars() which makes proper mask
       of BARs from the specified resource type. This would be very
       helpful for users of pci_enable_device_bars().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
38cc13022e PCI : add extremely specialized __pci_reenable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 3 of 3 patches does:

  - add __pci_reenable_device
    (recover former change of 1st patch)

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
9fb625c3cc PCI : Move pci_fixup_device and is_enabled (originally intended change)
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 2 of 3 patches does:

  - Move pci_fixup_device and enable_cnt
    (originally intended change)

  - relocate pci_fixup_device
    (recover latter change of 1st patch)

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
924b08f3ff PCI : remove too specialized __pci_enable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 1 of 3 patches does:

  - reverts small part of Inaky's patch
    (remove __pci_enable_device)
    This change will be recovered by 3rd patch.

  - temporarily remove pci_fixup_device.
    This change will be recovered by 2nd patch.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Brice Goglin
47a4d5be7c [PATCH] increment pos before looking for the next cap in __pci_find_next_ht_cap
While testing 2.6.20-rc3 on a machine with some CK804 chipsets, we noticed
that quirk_nvidia_ck804_msi_ht_cap() was not detecting HT MSI capabilities
anymore.  It is actually caused by the MSI mapping on the root chipset
being the 2nd HT capability in the chain.  pci_find_ht_capability() does
not seem to find anything but the first HT cap correctly, because it
forgets to increment the position before looking for the next cap.  The
following patch seems to fix it.

At least, this proves that having a ttl is good idea since the machine
would have been stucked in an infinite loop if we didn't have a ttl :)

We have to pass pos + PCI_CAP_LIST_NEXT to __pci_find_next_cap_ttl to
get the next HT cap instead of the same one again.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew J. Gallatin <gallatin@myri.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:20 -08:00