Commit Graph

78 Commits

Author SHA1 Message Date
Akinobu Mita
af0940dac3 ieee1394: Use hweight32
Use hweight32 instead of counting for each bit

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (add required include)
2009-11-18 20:30:35 +01:00
Harvey Harrison
debb48063a ieee1394: mark bus_info_data as a __be32 array
Two access functions get_max_rom and set_hw_config_rom are
changed to take __be32 as well.  Only bus_info_data was
ever passed in so this is OK.  All other uses of bus_info_data
treated it as a be32 value already.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-04 23:50:35 +01:00
Stefan Richter
cbe7dd699e ieee1394: ohci1394: flush MMIO writes before delay in initialization
and replace busy-wait by msleep.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-04 23:50:33 +01:00
Stefan Richter
9e234faf98 ieee1394: ohci1394: pass error codes from request_irq through
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-04 23:50:33 +01:00
Frans Pop
d1069aea68 ieee1394: ohci1394: don't leave interrupts enabled during suspend/resume
On my HP 2510p I get the following in dmesg during near the end of most
resumes from suspend to RAM:

irq 19: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.28-rc7 #67
Call Trace:
 <IRQ>  [<ffffffffa00ee9e1>] ? ohci_irq_handler+0x60/0x7e9 [ohci1394]
 [<ffffffff8026aa4d>] __report_bad_irq+0x38/0x87
 [<ffffffff8026abaa>] note_interrupt+0x10e/0x174
 [<ffffffff8026b262>] handle_fasteoi_irq+0xa7/0xd1
 [<ffffffff8020eb87>] do_IRQ+0x73/0xe4
 [<ffffffff8020c626>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffffa0012606>] ? acpi_idle_enter_bm+0x26b/0x2b2 [processor]
 [<ffffffffa00125fc>] ? acpi_idle_enter_bm+0x261/0x2b2 [processor]
 [<ffffffff8024f30f>] ? notifier_call_chain+0x33/0x5b
 [<ffffffff803b9c64>] ? cpuidle_idle_call+0x8c/0xc4
 [<ffffffff8020b312>] ? cpu_idle+0x4a/0x9a
 [<ffffffff8042c5c8>] ? rest_init+0x5c/0x5e
handlers:
[<ffffffffa00ee981>] (ohci_irq_handler+0x0/0x7e9 [ohci1394])
Disabling IRQ #19

There also seems to be an interrupt storm during suspend/resume when this
happens:
 19:      99968         33   IO-APIC-fasteoi   ohci1394

This patch gets rid of both issues and makes the resume as a whole
significantly faster.

Signed-off-by: Frans Pop <elendil@planet.nl>

As was pointed out in http://lkml.org/lkml/2008/12/6/127, this does not
fix the cause of the interrupt storm.  However, since the source of the
interrupts could not be determined yet, we make the system at least more
usable with this change.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-04 23:50:33 +01:00
Pieter Palmers
cc9429bcb6 ieee1394: rawiso: requeue packet for transmission after skipped cycle
As it seems, some host controllers have issues that can cause them to
skip cycles now and then when using large packets. I suspect that this
is due to DMA not succeeding in time. If the transmit fifo can't contain
more than one packet (big packets), the DMA should provide a new packet
each cycle (125us). I am under the impression that my current PCI
express test system can't guarantee this.

In any case, the patch tries to provide a workaround as follows:
The DMA program descriptors are modified such that when an error occurs,
the DMA engine retries the descriptor the next cycle instead of
stalling. This way no data is lost. The side effect of this is that
packets are sent with one cycle delay. This however might not be that
much of a problem for certain protocols (e.g. AM824). If they use
padding packets for e.g. rate matching they can drop one of those to
resync the streams.

The amount of skips between two userspace wakeups is counted. This
number is then propagated to userspace through the upper 16 bits of the
'dropped' parameter. This allows unmodified userspace applications due
to the following:
1) libraw simply passes this dropped parameter to the user application
2) the meaning of the dropped parameter is: if it's nonzero, something
bad has happened. The actual value of the parameter at this moment does
not have a specific meaning.

A libraw client can then retrieve the number of skipped cycles and
account for them if needed.

Signed-off-by: Pieter Palmers <pieterp@joow.be>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25 18:15:45 +02:00
Stefan Richter
9508c208aa ieee1394: ohci1394: missing PPC PMac feature calls in failure path
The failure path of ohci1394_pci_probe() reuses ohci1394_pci_remove().
Doing so it missed to call ohci1394_pmac_off() in a few unlikely early
error cases.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter
c4e2e02bc9 ieee1394: ohci1394: refactor some printk format strings
to reduce the size of ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter
d09c680383 ieee1394: ohci1394: unroll a macro with return
We don't want to hide something like return in a preprocessor macro.
Unroll the macro and use a goto, which also reduces the size of
ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Robert P. J. Day
e351c4d069 ieee1394: Use shorter list_splice_init() for brevity.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Harvey Harrison
b1ce1fd778 ieee1394: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter
b25d166616 ieee1394: ohci1394: refactor probe, remove, suspend, resume
Clean up shared code and variable names.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter
38275ac36d ieee1394: ohci1394: switch on bus power after resume on PPC PMac
The platform feature calls in the suspend method switched off cable
power, but the calls in the resume method did not switch it back on.

Add the necessary feature call to .resume.  Also add the corresponding
call to .suspend to make .suspend's behavior explicitly the same on all
PMacs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter
85c5798b09 ieee1394: ohci1394: don't schedule IT tasklets on IR events
Bug noted by Pieter Palmers:  Isochronous transmit tasklets were
scheduled on isochronous receive events, in addition to the proper
isochronous receive tasklets.

http://marc.info/?l=linux1394-devel&m=119783196222802

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:21 +01:00
Stefan Richter
be7963b7e7 ieee1394: ohci1394: fix initialization if built non-modular
Initialization of ohci1394 was broken according to one reporter if the
driver was statically linked, i.e. not built as loadable module.  Dmesg:

  PCI: Device 0000:02:07.0 not available because of resource collisions
  ohci1394: Failed to enable OHCI hardware.

This was reported for a Toshiba Satellite 5100-503.  The cause is commit
8df4083c52 in Linux 2.6.19-rc1 which only
served purposes of early remote debugging via FireWire.  This
functionality is better provided by the currently out-of-tree driver
ohci1394_earlyinit.  Reversal of the commit was OK'd by Andi Kleen.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-09-20 21:19:45 +02:00
Stefan Richter
53c96b4174 ieee1394: remove old isochronous ABI
Based on patch "the scheduled removal of RAW1394_REQ_ISO_{SEND,LISTEN}"
from Adrian Bunk, November 20 2006.

This patch also removes the underlying facilities in ohci1394 and
disables them in pcilynx.  That is, hpsb_host_driver.devctl() and
hpsb_host_driver.transmit_packet() are no longer used for iso reception
and transmission.

Since video1394 and dv1394 only work with ohci1394 and raw1394's rawiso
interface has never been implemented in pcilynx, pcilynx is now no
longer useful for isochronous applications.

raw1394 will still handle the request types but will complete the
requests with errors that indicate API version conflicts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:41 +02:00
Stefan Richter
17a624869e ieee1394: ohci1394: remove dead CONFIG variable
spotted by Robert P. J. Day <rpjday@mindspring.com>

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-07-10 00:07:36 +02:00
Simon Arlott
749cf76620 ieee1394: ohci1394: Fix mistake in printk message.
Fix the "attempting to setting" message in ohci1394.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Bernhard Kauer
2ab7752469 ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
Remove the unneeded code that clears, sets and again clears the
rcvPhyPkt bit in the ohci1394 LinkControl register in ohci_initialize().

Signed-off-by: Bernhard Kauer <kauer@os.inf.tu-dresden.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter
c13596b0e5 ieee1394: ohci1394: fix cosmetic problem in error logging
If posted write failed, an "Unhandled interrupt(s) 0x00000100" message
was logged by mistake.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:32 +02:00
Stefan Richter
afd6546d8d ieee1394: move some comments from declaration to definition
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 00:00:28 +02:00
Tobias Klauser
c5a69d57eb Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 20:11:19 +01:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Stefan Richter
3360177c62 ieee1394: restore config ROM when resuming
After PM suspend + resume, the local configuration ROM was not restored.
This prevented remote nodes from recognizing the resuming machine.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:59:19 +01:00
Stefan Richter
083922fe1c ieee1394: ohci1394: drop pcmcia-cs compatibility code
#ifdef PCMCIA is only true if compiled inside pcmcia-cs, isn't it?

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:59:09 +01:00
Kristian Hgsberg
dcb7112984 Add PCI class ID for firewire OHCI controllers.
Pull this define out of drivers/ieee1394/ohci1394.c and rename to match
other PCI class defines.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-08 20:55:23 +01:00
Stefan Richter
63cca59e89 ieee1394: ohci1394: call PMac code in shutdown only for proper machines
There has been an if(...) missing, for ages.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:04:35 +01:00
Stefan Richter
5370f1f5e9 ieee1394: ohci1394: reformat PPC_PMAC platform code
Adjust whitespace and line lengths

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:04:24 +01:00
Stefan Richter
48cfae44b4 ieee1394: ohci1394: add PPC_PMAC platform code to driver probe
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431
iBook G3 threw a machine check exception and put the display backlight
to full brightness after ohci1394 was unloaded and reloaded.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 23:04:14 +01:00
Alexey Dobriyan
c0f00e2797 ohci1394: shortcut irq printing
To print irq number no need to transform to string using %d, then print
using %s. Just use %d.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2006-12-07 21:44:27 +01:00
Stefan Richter
5f8d17f602 ieee1394: ohci1394: proper log messages in suspend and resume
- correct thinko in one of my last commits: cannot use PRINT macro with
   ohci == NULL
 - add log messages on ohci == NULL and on pci_enable_device != 0
 - update log macros from patch "revert fail on error in suspend" to use
   PRINT and DBGMSG where possible

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:32:53 +01:00
Stefan Richter
2a3f8ad3a9 ieee1394: ohci1394: revert fail on error in suspend
Some errors during preparation for suspended state can be skipped with a
warning instead of a failure of the whole suspend transition, notably an
error in pci_set_power_state.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:32:36 +01:00
Stefan Richter
da256c5537 ieee1394: ohci1394: suspend/resume cosmetics
Reorder the definitions of ohci1394_pci_suspend and _resume.  Remove
redundant comments.  Beautify return statements.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:28:40 +01:00
Bernhard Kaindl
f011bf085c ohci1394: steps to implement suspend/resume
I did a quick shot on what I described and the appended patch
does the first thing needed for working suspend/resume
in ohci1394 which is HW de- and re-initialisation.

It works with suspend2disk on my Ricoh R5C552 IEEE 1394 Controller
with the 2.6.17 kernel to the extent that if I call dvgrab --interactive
after suspend2disk without unloading ohci1394, it does not lock up
dvgrab with 100% CPU but properly connects to the camera, given
that I first unplug and plug the camera after coming back from
suspend.

I guess that could be fixed by forcing a bus reset in the resume
function.

I cannot test suspend to RAM here at the moment and should
follow the guidelines in Documentation/power/pci.txt also,
so this is rather a quick report than a finished patch and
there are some rough edges:

However, with this patch, I have to unload at least some in-kernel
users of ohci1394 like dv1394 or video1394 before suspending.

Not doing that caused an Oops and a bad tasklet error, probably from
not handling ISO tasklets during suspend/resume properly.

Maybe these can be temporarily cleared or unregistered and
re-registered for suspend/resume with help from the other
layers or from the highlevel 1394 core, but I do not really
know what these do.

But this patch provides a useful base to start from and is
already of much help for people which do not need dv1394
and video1394 or can unload them at least during suspend.

I cannot test function with sbp2 at the moment, but raw1394
seems to work fine.

Signed-off-by: Bernhard Kaindl <bk@fsfe.org>

Update 1: merge with previous two ohci1394 suspend/resume patches
Update 2: version for application on top of Linux 2.6.19-rc4

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-12-07 21:28:13 +01:00
Christoph Lameter
e94b176609 [PATCH] slab: remove SLAB_KERNEL
SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
Stefan Richter
346f5c7ee7 ieee1394: ohci1394: revert fail on error in suspend
Some errors during preparation for suspended state can be skipped with a
warning instead of a failure of the whole suspend transition, notably an
error in pci_set_power_state.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-10-29 20:02:23 +01:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Stefan Richter
ea6104c224 ieee1394: ohci1394: check for errors in suspend or resume
Some of the suspend and resume litany may fail.
Tell the PCI core about it.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:41:45 +02:00
Pavel Machek
f0645e7720 set power state of firewire host during suspend
Put firewire host controller in PCI Dx state for system suspend.
(I was not able to measure any power savings, but it sounds like right
thing to do, anyway.)

Signed-off-by: Pavel Machek <pavel@suse.cz>

Update by stefanr:  Shuffle with existing PPC_PMAC code.  Set power
state in the resume hook too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:39:06 +02:00
Stefan Richter
9531f13ae5 ieee1394: ohci1394: more obvious endianess handling
Rename ohci1394's packet_swab to header_le32_to_cpu to better reflect
what it actually does.  Also, define a constant array as 'const' and
check the array index properly.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:39:01 +02:00
Stefan Richter
cf82703dc6 ieee1394: ohci1394: fix endianess bug in debug message
The transaction labels were misprinted int the debug printk "Packet
received from node..." due two byte-swapping once too often.  Affected
were big endian machines, except UniNorth based ones.  Fix tested by
Wolfgang Pfeiffer.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:38:57 +02:00
Alexey Dobriyan
2a87418284 CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c
Remove some code which is unneeded if CONFIG_PM=n.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:33:19 +02:00
Stefan Richter
611aa19fd6 ieee1394: safer definition of empty macros
A deactivated macro, defined as "#define foo(bar)", will result in
silent corruption if somebody forgets a semicolon after a call to foo.
Replace it by "#define foo(bar) do {} while (0)" which will reveal any
respective syntax errors.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:31:20 +02:00
Andi Kleen
8df4083c52 Initialize ieee1394 early when built in
This makes debugging with firescope easier.

Signed-off-by: Andi Kleen <ak@suse.de> (original patch)

Update:
 - no need for #ifdef MODULE
 - add comment in ieee1394_core, more verbose comment in ohci1394

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (update)
2006-09-17 19:29:34 +02:00
Stefan Richter
9b4f2e9576 ieee1394: merge from Linus
Conflicts: drivers/ieee1394/hosts.c
Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling
with patch "ieee1394: fix kerneldoc of hpsb_alloc_host".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 18:19:31 +02:00
Danny Tholen
7334bb4ae9 [PATCH] 1394: fix for recently added firewire patch that breaks things on ppc
Recently a patch was added for preliminary suspend/resume handling on
!PPC_PMAC.  However, this broke both suspend and firewire on powerpc
because it saves the pci state after the device has already been disabled.

This moves the save state to before the pmac specific code.

Signed-off-by: Danny Tholen <obiwan@mailmij.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Stefan Richter
2b01b80b94 [PATCH] ieee1394: replace __inline__ by inline
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:28 -04:00
Thomas Gleixner
272ee69c65 [PATCH] irq-flags: firewire: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman
2427ddd8fa [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00