Commit Graph

127 Commits

Author SHA1 Message Date
Matthew Garrett
e5a44df85e [SCSI] hpsa: Disable ASPM
The Windows driver .inf disables ASPM on hpsa devices. Do the same because the
selection of a non default ASPM policy can cause the device to hang.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@kernel.org
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-11-14 10:47:01 -06:00
Linus Torvalds
cd3f07d1e6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
  [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev
  [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands
  [SCSI] scsi_transport_iscsi: Fix documentation os parameter
  [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support
  [SCSI] libfc: improve flogi retries to avoid lport stuck
  [SCSI] libfc: avoid exchanges collision during lport reset
  [SCSI] libfc: fix checking FC_TYPE_BLS
  [SCSI] edd: Treat "XPRS" host bus type the same as "PCI"
  [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)
  [SCSI] isci: revert bcn filtering
  [SCSI] isci: Fix hard reset timeout conditions.
  [SCSI] isci: No need to manage the pending reset bit on pending requests.
  [SCSI] isci: Remove redundant isci_request.ttype field.
  [SCSI] isci: Fix task management for SMP, SATA and on dev remove.
  [SCSI] isci: No task_done callbacks in error handler paths.
  [SCSI] isci: Handle task request timeouts correctly.
  [SCSI] isci: Fix tag leak in tasks and terminated requests.
  [SCSI] isci: Immediately fail I/O to removed devices.
  [SCSI] isci: Lookup device references through requests in completions.
  [SCSI] ipr: add definitions for additional adapter
  ...
2011-11-05 15:32:53 -07:00
Linus Torvalds
3d0a8d10cf Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-block
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits)
  virtio-blk: use ida to allocate disk index
  hpsa: add small delay when using PCI Power Management to reset for kump
  cciss: add small delay when using PCI Power Management to reset for kump
  xen/blkback: Fix two races in the handling of barrier requests.
  xen/blkback: Check for proper operation.
  xen/blkback: Fix the inhibition to map pages when discarding sector ranges.
  xen/blkback: Report VBD_WSECT (wr_sect) properly.
  xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests.
  xen-blkfront: plug device number leak in xlblk_init() error path
  xen-blkfront: If no barrier or flush is supported, use invalid operation.
  xen-blkback: use kzalloc() in favor of kmalloc()+memset()
  xen-blkback: fixed indentation and comments
  xen-blkfront: fix a deadlock while handling discard response
  xen-blkfront: Handle discard requests.
  xen-blkback: Implement discard requests ('feature-discard')
  xen-blkfront: add BLKIF_OP_DISCARD and discard request struct
  drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()
  drivers/block/loop.c: emit uevent on auto release
  drivers/block/cpqarray.c: use pci_dev->revision
  loop: always allow userspace partitions and optionally support automatic scanning
  ...

Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-04 17:22:14 -07:00
Stephen M. Cameron
a0c124137a [SCSI] hpsa: detect controller lockup
When controller lockup condition is detected,
we should fail all outstanding commands and disable
the controller.  This will enable multipath solutions
to recover gracefully.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:35:01 +04:00
Stephen M. Cameron
bb158eabda [SCSI] hpsa: fix flush cache transfer length
We weren't filling in the transfer length of the
flush cache command (it transfers 4 bytes of zeroes).
Firmware didn't seem to be bothered by this, but it
should be fixed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:34:27 +04:00
Scott Teel
b7ec021fe6 [SCSI] hpsa: fix potential array overflow in hpsa_update_scsi_devices
The currentsd[] array in hpsa_update_scsi_devices had room for
256 devices.  The code was iterating over however many physical
and logical devices plus an additional number of possible external
MSA2XXX controllers, which together could potentially exceed 256.

We increased the size of the currentsd array to 1024 + 1024 + 32 + 1
elements to reflect a reasonable maximum possible number of devices
which might be encountered.  We also don't just walk off the end
of the array if the array controller reports more devices than we
are prepared to handle, we just ignore the excessive devices.

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:34:04 +04:00
Scott Teel
cfe5badcab [SCSI] hpsa: rename HPSA_MAX_SCSI_DEVS_PER_HBA
Rename HPSA_MAX_SCSI_DEVS_PER_HBA to HPSA_MAX_DEVICES

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:16:38 +04:00
Stephen M. Cameron
03ab31f4c1 [SCSI] hpsa: remove unused busy_initializing and busy_scanning
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:09:59 +04:00
Stephen M. Cameron
c0d6a4d17b [SCSI] hpsa: set max sectors instead of taking the default
Set the max hardware sectors in the SCSI host template to 8192
to allow for larger i/o's (8192 is the same limit the cciss
driver currently has.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-30 14:09:24 +04:00
Mike Miller
c4853efec6 hpsa: add small delay when using PCI Power Management to reset for kump
The P600 requires a small delay when changing states. Otherwise we may think
the board did not reset and we bail. This for kdump only and is particular
to the P600.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-21 08:21:50 +02:00
Mike Miller
fba63097b8 [SCSI] hpsa: change confusing message to be more clear
The following warning message may be confusing to some users:

dev_warn(&pdev->dev, "Controller claims that "
		"'Bit 2 doorbell reset' is "
		"supported, but not 'bit 5 doorbell reset'.  "
		"Firmware update is recommended.\n");

Most users don't know or care what bit we may be hitting. Also change
"recommended" to "required."

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-20 10:16:20 -05:00
Stephen M. Cameron
01350d0553 [SCSI] hpsa: fix physical device lun and target numbering problem
If a physical device exposed to the OS by hpsa
is replaced (e.g. one hot plug tape drive is replaced
by another, or a tape drive is placed into "OBDR" mode
in which it acts like a CD-ROM device) and a rescan is
initiated, the replaced device will be added to the
SCSI midlayer with target and lun numbers set to -1.
After that, a panic is likely to ensue.  When a physical
device is replaced, the lun and target number should be
preserved.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-26 12:52:39 -07:00
Stephen M. Cameron
0b0e1d6cbc [SCSI] hpsa: fix problem that OBDR devices are not detected
The test to detect OBDR ("One Button Disaster Recovery")
cd-rom devices was comparing against uninitialized data.

Fixed by moving the test for the device to where the
inquiry data is collected, and uninitialized variable
altogether as it wasn't really being used.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-26 12:49:04 -07:00
Linus Torvalds
6c6e3b828b Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (71 commits)
  [SCSI] fcoe: cleanup cpu selection for incoming requests
  [SCSI] fcoe: add fip retry to avoid missing critical keep alive
  [SCSI] libfc: fix warn on in lport retry
  [SCSI] libfc: Remove the reference to FCP packet from scsi_cmnd in case of error
  [SCSI] libfc: cleanup sending SRR request
  [SCSI] libfc: two minor changes in comments
  [SCSI] libfc, fcoe: ignore rx frame with wrong xid info
  [SCSI] libfc: release exchg cache
  [SCSI] libfc: use FC_MAX_ERROR_CNT
  [SCSI] fcoe: remove unused ptype field in fcoe_rcv_info
  [SCSI] bnx2fc: Update copyright and bump version to 1.0.4
  [SCSI] bnx2fc: Tx BDs cache in write tasks
  [SCSI] bnx2fc: Do not arm CQ when there are no CQEs
  [SCSI] bnx2fc: hold tgt lock when calling cmd_release
  [SCSI] bnx2fc: Enable support for sequence level error recovery
  [SCSI] bnx2fc: HSI changes for tape
  [SCSI] bnx2fc: Handle REC_TOV error code from firmware
  [SCSI] bnx2fc: REC/SRR link service request and response handling
  [SCSI] bnx2fc: Support 'sequence cleanup' task
  [SCSI] dh_rdac: Associate HBA and storage in rdac_controller to support partitions in storage
  ...
2011-07-30 08:36:02 -10:00
Stephen M. Cameron
f6e76055ba [SCSI] hpsa: retry commands completing with status of UNSOLICITED_ABORT
In a shared SAS setup, target devices may be reset by one of
several hosts, and outstanding commands on that device will be
completed to corresponding hosts with status of UNSOLICITED_ABORT.
Such commands should be retried instead of being treated as i/o
errors.  Also fixed a nearby spelling error.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27 15:35:49 +04:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Stephen M. Cameron
db111e18ec [SCSI] hpsa: fix potential overrun while memcpy'ing sense data
This memcpy:

   memcpy(cmd->sense_buffer, ei->SenseInfo,
	   ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
		   SCSI_SENSE_BUFFERSIZE :
		   ei->SenseLen);

The ei->SenseLen field is filled in by the Smart Array.  For requests to
logical drives, it will not exceed 32 bytes, so should be ok, but for physical
requests it depends on the target device, not the Smart Array.  It's conceivable
that this could exceed the 32 byte size of ei->SenseInfo.  In that case, the memcpy
would read past the end of ei->SenseInfo, copying data from the next command,
as if it were sense data, or, if it happened to be the very last command in the
block of allocated commands, could fall off the end of the allocated area and
crash.  I'm not aware of anyone ever encountering this behavior, but it could
conceivably happen.  This bug was found by Coverity.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 12:09:56 -05:00
Stephen M. Cameron
c2dd32e026 [SCSI] hpsa: fix dma unmap error in hpsa_passthru_ioctl
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 12:09:53 -05:00
Joe Perches
7630abd0c6 [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)
Not at all sure this is correct or appropriate to change,
but this seems odd.

Found via coccinelle script

@@
type T;
T* ptr;
expression E1;
@@

* memset(E1, 0, sizeof(ptr));

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:19:27 +04:00
Stephen M. Cameron
fda38518f2 [SCSI] hpsa: add P2000 to list of shared SAS devices
Signed-off-by: Scott Teel <scott.stacy.teel@hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:09:41 +04:00
Stephen M. Cameron
4638078697 [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work.
Just go straight to the soft-reset method instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:08:09 +04:00
Stephen M. Cameron
dfc2224828 [SCSI] hpsa: remove superfluous sleeps around reset code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:50 +04:00
Stephen M. Cameron
64670ac870 [SCSI] hpsa: do soft reset if hard reset is broken
on driver load, if reset_devices is set, and the hard reset
attempts fail, try to bring up the controller to the point that
a command can be sent, and send it a soft reset command, then
after the reset undo whatever driver initialization was done to get
it to the point to take a command, and re-do it after the reset.

This is to get kdump to work on all the "non-resettable" controllers
(except 64xx controllers which can't be reset due to the potentially
shared cache module.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:28 +04:00
Stephen M. Cameron
cf0b08d0cd [SCSI] hpsa: use new doorbell-bit-5 reset method
The bit-2-doorbell reset method seemed to cause (survivable) NMIs
on some systems and (unsurvivable) IOCK NMIs on some G7 servers.
Firmware guys implemented a new doorbell method to alleviate these
problems triggered by bit 5 of the doorbell register.  We want to
use it if it's available.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:07:01 +04:00
Stephen M. Cameron
9a41338e5b [SCSI] hpsa: remove atrophied hpsa_scsi_setup function
hpsa_scsi_setup at one time contained enough code to justify
its existence, but that time has passed.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:06:30 +04:00
Stephen M. Cameron
2b870cb300 [SCSI] hpsa: clarify messages around reset behavior
When waiting for the board to become "not ready"
don't print a message saying "waiting for board to
become ready" (possibly followed by a message saying
"failed waiting for board to become not ready".  Instead,
it should be "waiting for board to reset" and "failed
waiting for board to reset."

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:06:11 +04:00
Stephen M. Cameron
0ae01a32cb [SCSI] hpsa: factor out irq request code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:05:20 +04:00
Stephen M. Cameron
2e9d1b3626 [SCSI] hpsa: factor out cmd pool allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:05:03 +04:00
Stephen M. Cameron
580ada3c1e [SCSI] hpsa: do a better job of detecting controller reset failure
Detect failure of controller reset by noticing if the 32 bytes of
"driver version" we store on the hardware in the config table
fail to get zeroed out.  Previously we noticed if the controller
did not transition to "simple mode", but this did not detect reset
failure if the controller was already in simple mode prior to
the reset attempt (e.g. due to module parameter hpsa_simple_mode=1).

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:04:11 +04:00
Stephen M. Cameron
1fb011fb05 [SCSI] hpsa: remove unused parameter from hpsa_complete_scsi_command()
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-17 11:03:14 +04:00
Stephen M. Cameron
941b1cdae8 [SCSI] hpsa: export resettable host attribute
This attribute, requested by Redhat, allows kexec-tools to know
whether the controller can honor the reset_devices kernel parameter
and actually reset the controller.  For kdump to work properly it
is necessary that the reset_devices parameter be honored.  This
attribute enables kexec-tools to warn the user if they attempt to
designate a non-resettable controller as the dump device.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:44:41 -05:00
Stephen M. Cameron
3f5eac3a04 [SCSI] hpsa: move device attributes to avoid forward declarations
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:40:20 -05:00
scameron@beardog.cce.hp.com
9143a96122 [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try)
My first attempt was botched, got the wrong PCI Device ID
(used PCI_DEVICE_ID_HP_CISSE, should have been PCI_DEVICE_ID_HP_CISSF)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 18:34:58 -05:00
Dan Carpenter
382be668c5 [SCSI] hpsa: fix bad comparison
'!' has higher precedence than '&'.  CFGTBL_ChangeReq is 0x1 so the
original code is equivelent to if (!doorbell_value) {...

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:34:38 -06:00
Stephen M. Cameron
ba95e2ac6b [SCSI] hpsa: Do not attempt kdump if we detect resetting controller failed.
We can get completions left over from before the attempted reset which
will interfere with the kdump.  Better to just not make the attempt in
that case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:34:14 -06:00
Stephen M. Cameron
960a30e7a7 [SCSI] hpsa: Inform controller we are using 32-bit tags.
Controller will transfer only 32-bits on completion if it
knows we are only using 32-bit tags.  Also, some newer controllers
apparently (and erroneously) require that we only use 32-bit tags,
and that we inform the controller of this.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:33:52 -06:00
Stephen M. Cameron
745a7a25bc [SCSI] hpsa: Add transport_mode host attribute in /sys
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:33:06 -06:00
Stephen M. Cameron
a9a3a2739a [SCSI] hpsa: make hpsa.hpsa_simple_mode=1 module parameter actually work
It's not enough to simple avoid putting the board into performant
mode, as we have to set up the interrupts differently, etc.  When
I originally tested this module parameter, I tested it incorrectly
without realizing it, and the driver was running in performant mode
the whole time unbeknownst to me.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:32:30 -06:00
Stephen M. Cameron
9e0fc764ea [SCSI] hpsa: do not re-order commands in internal queues
Driver's internal queues should be FIFO, not LIFO.
This is a port of an almost identical patch from cciss by Jens Axboe.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18 12:31:19 -06:00
Vasiliy Kulikov
938abd8449 [SCSI] hpsa: avoid leaking stack contents to userland
memset arg64 to zero in the passthrough ioctls to avoid leaking contents
of kernel stack memory to userland via uninitialized padding fields
inserted by the compiler for alignment reasons.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:34:05 -06:00
Stephen M. Cameron
1d5e2ed080 [SCSI] hpsa: Fix problem that CMD_UNABORTABLE command status was treated as unknown
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:33:54 -06:00
Stephen M. Cameron
c4f8a299d0 [SCSI] hpsa: fix use of uninitialized variable in hpsa_add_msa2xxx_enclosure_device()
Thanks to Scott Teel for noticing this.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:33:32 -06:00
Stephen M. Cameron
94a136495a [SCSI] hpsa: Add a per controller commands_outstanding entry in /sys
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:31:10 -06:00
Stephen M. Cameron
60d3f5b068 [SCSI] hpsa: use usleep_range not msleep for small sleeps
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:56 -06:00
Stephen M. Cameron
02ec19c82e [SCSI] hpsa: allow driver to put controller in either simple or performant mode
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:43 -06:00
Stephen M. Cameron
6eaf46fdc7 [SCSI] hpsa: take the adapter lock in hpsa_wait_for_mode_change_ack
Need to take the lock while accessing the register to check to
see if config table changes have taken effect.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:26 -06:00
Stephen M. Cameron
25c1e56a04 [SCSI] hpsa: do not reset unknown boards on reset_devices
This is to prevent hpsa from resetting older boards
which the cciss driver may be controlling.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:30:11 -06:00
Stephen M. Cameron
72ceeaecb7 [SCSI] hpsa: limit commands allocated on reset_devices
This is to conserve memory in a memory-limited kdump scenario

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:58 -06:00
Stephen M. Cameron
270d05de2b [SCSI] hpsa: Use kernel provided PCI state save and restore functions
and use the doorbell reset method if available (which doesn't
lock up the controller if you properly save and restore all
the PCI registers that you're supposed to.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:46 -06:00
Stephen M. Cameron
fe5389c87f [SCSI] hpsa: fix board status waiting code
After a reset, we should first wait for the board to become "not ready",
and then wait for it to become "ready", instead of immediately
waiting for it to become "ready", and do this waiting *after*
restoring PCI config space registers.  Also, only wait 10 secs
for board to become "not ready" after a reset (it should quickly
become not ready.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:29:32 -06:00