Commit Graph

50 Commits

Author SHA1 Message Date
Stefan Richter
18e9b10fcd firewire: cdev: add closure to async stream ioctl
This changes the as yet unreleased FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
to generate an fw_cdev_event_response event just like the other two
ioctls for asynchronous request transmission do.  This way, clients get
feedback on successful or unsuccessful transmission.

This also adds input validation for length, tag, channel, sy, speed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00
Stefan Richter
664d8010b1 firewire: cdev: simplify FW_CDEV_IOC_SEND_REQUEST return value
This changes the ioctl() return value of FW_CDEV_IOC_SEND_REQUEST and of
the as yet unreleased FW_CDEV_IOC_SEND_BROADCAST_REQUEST.  They used to
return
	sizeof(struct fw_cdev_send_request *) + data_length

which is obviously a failed attempt to emulate the return value of
raw1394's respective interface which uses write() instead of ioctl().

However, the first summand, as size of a kernel pointer, is entirely
meaningless to clients and the second summand is already known to
clients.  And the result does not resemble raw1394's write() return
code anyway.

So simplify it to a constant non-negative value, i.e. 0.  The only
dangers here would be that future client implementations check for error
by ret != 0 instead of ret < 0 when running on top of an old kernel; or
that current clients interpret ret = 0 or more as failure.  But both are
hypothetical cases which don't justify to return irritating values.

While we touch this code, also remove "& 0x1f" from tcode in the call of
fw_send_request.  The tcode cannot be bigger than 0x1f at this point.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00
Stefan Richter
207fbefb18 firewire: cdev: fix race of ioctl_send_request with bus reset
The bus reset handler concurrently frees client->device->node.  Use
device->node_id instead.  This is equivalent to device->node->node_id
while device->generation is current.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00
Stefan Richter
de487da8ca firewire: cdev: secure add_descriptor ioctl
The access permissions and ownership or ACL of /dev/fw* character device
files will typically be set based on the device type of the respective
nodes, as obtained by firewire-core from descriptors in the device's
configuration ROM.  An example policy is to deny write permission by
default but grant write permission to files of AV/C video and audio
devices and IIDC video devices.

The FW_CDEV_IOC_ADD_DESCRIPTOR ioctl could be used to partly subvert
such a policy:  Find a device file with relaxed permissions, use the
ioctl to add a descriptor with AV/C marker to the local node's ROM, thus
gain access to the local node's character device file.  (This is only
possible if there are udev scripts installed which actively relax
permissions for known device types and if there is a device of such a
type connected.)

Accessibility of the local node's device file is relevant to host
security if the host contains two or more IEEE 1394 link layer
controllers which are plugged into a single bus.

Therefore change the ABI to deny FW_CDEV_IOC_ADD_DESCRIPTOR if the file
belongs to a remote node.  (This change has no impact on known
implementers of the ABI:  None of them uses the ioctl yet.)

Also clarify the documentation:  The ioctl affects all local nodes, not
just one local node.

Cc: stable@kernel.org
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:50 +01:00
Stefan Richter
c8a25900f3 firewire: cdev: amendment to "add ioctl to query maximum transmission speed"
The as yet unreleased FW_CDEV_IOC_GET_SPEED ioctl puts only a single
integer into the parameter buffer.  We can use ioctl()'s return value
instead.

(Also: Some whitespace change in firewire-cdev.h.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:49 +01:00
Jay Fenlason
f8c2287c65 firewire: implement asynchronous stream transmission
Allow userspace and other firewire drivers (fw-ipv4 I'm looking at
you!) to send Asynchronous Transmit Streams as described in 7.8.3 of
release 1.1 of the 1394 Open Host Controller Interface Specification.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (tweaks)
2009-03-24 20:56:49 +01:00
Stefan Richter
81610b8fbf firewire: cdev: simplify a schedule_delayed_work wrapper
The kernel API documentation says that queue_delayed_work() returns 0
(only) if the work was already queued.  The return codes of
schedule_delayed_work() are not documented but the same.

In init_iso_resource(), the work has never been queued yet, hence we
can assume schedule_delayed_work() to be a guaranteed success there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:46 +01:00
Stefan Richter
5d9cb7d276 firewire: cdev: add ioctls for iso resource management, amendment
Some fixes:
  - Remove stale documentation.
  - Fix a != vs. == thinko that got in the way of channel management.
  - Try bandwidth deallocation even if channel deallocation failed.

A simplification:
  - fw_cdev_allocate_iso_resource.channels is now ordered like
    libdc1394's dc1394_iso_allocate_channel() channels_allowed
    argument.

By the way, I looked closer at cards from NEC, TI, and VIA, and noticed
that they all don't implement IEEE 1394a behaviour which is meant to
deviate from IEEE 1212's notion of lock compare-swap.  This means that
we have to do two lock transactions instead of one in many cases where
one transaction would already succeed on a fully 1394a compliant IRM.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:46 +01:00
Stefan Richter
36a755cfc3 firewire: cdev: shut down iso context before freeing the buffer
DMA must be halted before we DMA-unmap and free the DMA buffer.  Since
we cannot rely on the client to stop the context before it closes the
fd, we have to reorder fw_iso_buffer_destroy vs. fw_iso_context_destroy.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:46 +01:00
Stefan Richter
3ba949868a firewire: cdev: replace some spin_lock_irqsave by spin_lock_irq
All of these functions are entered with IRQs enabled.
Hence the unconditional spin_unlock_irq can be used.

Function:                  Caller context:
    dequeue_event()            client process, via read(2)
    fill_bus_reset_event()     fw-device.c update worqueue job
    release_client_resource()  client process, via ioctl(2)
    fw_device_op_release()     client process, via close(2)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:45 +01:00
Stefan Richter
5d3fd692a7 firewire: cdev: extend transaction payload size check
Make the size check of ioctl_send_request and
ioctl_send_broadcast_request speed dependent.  Also change the error
return code from -EINVAL to -EIO to distinguish this from other errors
concerning the ioctl parameters.

Another payload size limit for which we don't check here though is the
remote node's Bus_Info_Block.max_rec.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:45 +01:00
Stefan Richter
1566f3dc3e firewire: cdev: restrict broadcast write requests to Units Space
We don't want random users write to Memory Space (e.g. PCs with physical
DMA filters down) or to core CSRs like Reset_Start.

This does not protect SBP-2 target CSRs.  But properly behaving SBP-2
targets ignore broadcast write requests to these registers, and the
maximum damage which can happen with laxer targets is DOS.  But there
are ways to create DOS situations anyway if there are devices with weak
device file permissions (like audio/video devices) present at the same
bus as an SBP-2 target.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:45 +01:00
Jay Fenlason, Stefan Richter
acfe833357 firewire: cdev: add ioctl for broadcast write requests
Write transactions to the broadcast node ID are a convenient way to
trigger functions of multiple nodes at once.  IIDC is a protocol which
can make use of this if multiple cameras with same command_regs_base are
connected at the same bus.

Based on
    Date: Wed, 10 Sep 2008 11:32:16 -0400
    From: Jay Fenlason <fenlason@redhat.com>
    Subject: [patch] SEND_BROADCAST_REQUEST
Changes:  ioctl_send_request() and ioctl_send_broadcast_request() now
share code.  Broadcast speed corrected to S100.  Check for proper tcode.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:44 +01:00
Stefan Richter
33580a3ef5 firewire: cdev: add ioctl to query maximum transmission speed
While the speed of asynchronous transactions is automatically chosen by
the kernel, the speed of isochronous streams has to be chosen by the
initiating client.

In case of 1394a bus topologies, the maximum possible speed could be
figured out with some effort by evaluation of the remote node's link
speed field in the config ROM, the local node's link speed field, and
the PHY speeds and topologic information in the local node's or IRM's
topology map CSR.  However, this does not work in case of 1394b buses.

Hence add an ioctl to export the maximum speed which the kernel already
determined.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:44 +01:00
Stefan Richter
1ec3c0269d firewire: cdev: add ioctls for manual iso resource management
This adds ioctls for allocation and deallocation of a channel or/and
bandwidth without auto-reallocation and without auto-deallocation.

The benefit of these ioctls is that libraw1394-style isochronous
resource management can be implemented without write access to the IRM's
character device file.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:44 +01:00
Jay Fenlason, Stefan Richter
b1bda4cdc2 firewire: cdev: add ioctls for isochronous resource management
Based on
    Date: Tue, 18 Nov 2008 11:41:27 -0500
    From: Jay Fenlason <fenlason@redhat.com>
    Subject: [Patch V4] Add ISO resource management support
with several changes to the ABI and implementation.  Only the part of
the ABI which enables auto-reallocation and auto-deallocation is
included here.

This implements ioctls for kernel-assisted allocation of isochronous
channels and isochronous bandwidth.  The benefits are:
  - The client does not have to have write access to the /dev/fw* device
    corresponding to the IRM.
  - The client does not have to perform reallocation after bus resets.
  - Channel and bandwidth are deallocated by the kernel if the file is
    closed before the client deallocated the resources.  Thus resources
    are released even if the client crashes.

It is anticipated that future in-kernel code (firewire-core IRM code;
the firewire port of firedtv), will use the fw-iso.c portions of this
code too.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: David Moore <dcm@acm.org>
2009-03-24 20:56:43 +01:00
Stefan Richter
be5bbd6756 firewire: cdev: sort includes
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:43 +01:00
Stefan Richter
97c18b7fd6 firewire: cdev: unify names of struct types and of their instances
to indicate that they are specializations of struct event or of struct
client_resource, respectively.

struct response was both an event and a client_resource; it is now split
into struct outbound_transaction_resource and ~_event in order to
document more explicitly which types of client resources exist.

struct request and struct_request_event are renamed to struct
inbound_transaction_resource and ~_event because requests and responses
occur in outbound and in inbound transactions.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:43 +01:00
Stefan Richter
fb4430367b firewire: cdev: reference-count client instances
The lifetime of struct client instances must be longer than the lifetime
of any client resource.

This fixes a possible race between fw_device_op_release and transaction
completions.  It also prepares for new ioctls for isochronous resource
management which will involve delayed processing of client resources.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Reviewed-by: David Moore <dcm@acm.org>
2009-03-24 20:56:42 +01:00
Stefan Richter
a459b8ab9c firewire: cdev: use list_first_entry
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:41 +01:00
Stefan Richter
53dca51175 firewire: remove line breaks before function names
type
    function_name(parameters);

is nice to look at but was not used consistently.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:40 +01:00
Stefan Richter
2dbd7d7e23 firewire: standardize a variable name
"ret" is the new "retval".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:39 +01:00
Stefan Richter
3e0b5f0d7c firewire: cdev: address handler input validation
Like before my commit 1415d9189e,
fw_core_add_address_handler() does not align the address region now.
Instead the caller is required to pass valid parameters.

Since one of the callers of fw_core_add_address_handler() is the cdev
userspace interface, we now check for valid input.  If the client is
buggy, we give it a hint with -EINVAL.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:38 +01:00
Jay Fenlason
45ee3199eb firewire: cdev: use an idr rather than a linked list for resources
The current code uses a linked list and a counter for storing
resources and the corresponding handle numbers.  By changing to an idr
we can be safe from counter wrap-around giving two resources the same
handle.

Furthermore, the deallocation ioctls now check whether the resource to
be freed is of the intended type.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>

Some rework by Stefan R:
  - The idr API documentation says we get an ID within 0...0x7fffffff.
    Hence we can rest assured that idr handles fit into cdev handles.
  - Fix some races.  Add a client->in_shutdown flag for this purpose.
  - Add allocation retry to add_client_resource().
  - It is possible to use idr_for_each() in fw_device_op_release().
  - Fix ioctl_send_response() regression.
  - Small style changes.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:38 +01:00
Stefan Richter
97811e3473 firewire: cdev: fix race of fw_device_op_release with bus reset
Unlink the client from the fw_device earlier in order to prevent bus
reset events being added to client->event_list during shutdown.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:38 +01:00
Stefan Richter
1f3125af8e firewire: cdev: tcodes input validation
The behaviour of fw-transaction.c::fw_send_request is ill-defined for
any other tcodes than read/ write/ lock request tcodes.  Therefore
prevent requests with wrong tcodes from entering the transaction layer.

Maybe fw_send_request should check them itself, but I am not inclined to
change it and fw_fill_request from void-valued functions to ones which
return error codes and pass those up.  Besides, maybe fw_send_request is
going to support one more tcode than ioctl_send_request in the future
(TCODE_STREAM_DATA).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:37 +01:00
Stefan Richter
d67cfb9613 firewire: convert client_list_lock to mutex
So far it is only taken in non-atomic contexts.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:37 +01:00
Jay Fenlason
cf417e5494 firewire: add a client_list_lock
This adds a client_list_lock, which only protects the device's
client_list, so that future versions of the driver can call code that
takes the card->lock while holding the client_list_lock.  Adding this
lock is much simpler than adding __ versions of all the functions that
the future version may need.  The one ordering issue is to make sure
code never takes the client_list_lock with card->lock held.  Since
client_list_lock is only used in three places, that isn't hard.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>

Update fill_bus_reset_event() accordingly.  Include linux/spinlock.h.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24 20:56:36 +01:00
Stefan Richter
99692f71ee firewire: fix ioctl() return code
Reported by Jay Fenlason:  ioctl() did not return as intended
  - the size of data read into ioctl_send_request,
  - the number of datagrams enqueued by ioctl_queue_iso.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:10 +02:00
Stefan Richter
7a1003449c firewire: fix setting tag and sy in iso transmission
Reported by Jay Fenlason:
The iso packet control accessors in fw-cdev.c had bogus masks.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-10-15 22:21:10 +02:00
David Moore
8401d92ba4 firewire: Preserve response data alignment bug when it is harmless
Recently, a bug having to do with the alignment of transaction response
data was fixed.  However, some apps such as libdc1394 relied on the
presence of that bug in order to function correctly.  In order to stay
compatible with old versions of those apps, this patch preserves the bug
in cases where it is harmless to normal operation (such as the single
quadlet read) due to a simple duplication of data.  This guarantees
maximum compatability for those users who are using the old app with the
fixed kernel.

Signed-off-by: David Moore <dcm@acm.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-08-02 20:03:49 +02:00
JiSheng Zhang
f9543d0ab6 firewire: queue the right number of data
There will be 4 padding bytes in struct fw_cdev_event_response on some platforms
The member:__u32 data will point to these padding bytes. While queue the
response and data in complete_transaction in fw-cdev.c, it will queue like this:
|response(excluding padding bytes)|4 padding bytes|4 padding bytes|data.
It queue 4 extra bytes. That is to say it use "&response + sizeof(response)"
while other place of kernel and userspace library use "&response + offsetof
(typeof(response), data)". So it will lost the last 4 bytes of data. This patch
can fix it while not changing the struct definition.

Signed-off-by: JiSheng Zhang <jszhang3@mail.ustc.edu.cn>

This fixes responses to outbound block read requests on 64bit architectures.
Tested on i686, x86-64, and x86-64 with i686 userland, using firecontrol and
gscanbus.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-20 15:25:03 +02:00
Stefan Richter
5cb84067d6 firewire: fill_bus_reset_event needs lock protection
Callers of fill_bus_reset_event() have to take card->lock.  Otherwise
access to node data may oops if node removal is in progress.

A lockless alternative would be

-	event->local_node_id = card->local_node->node_id;
+	tmp = fw_node_get(card->local_node);
+	event->local_node_id = tmp->node_id;
+	fw_node_put(tmp);

and ditto with the other node pointers which fill_bus_reset_event()
accesses.  But I went the locked route because one of the two callers
already holds the lock.  As a bonus, we don't need the memory barrier
anymore because device->generation and device->node_id are written in
a card->lock protected section.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2008-06-19 00:12:35 +02:00
Jay Fenlason
551f4cb9de firewire: prevent userspace from accessing shut down devices
If userspace ignores the POLLERR bit from poll(), and only attempts to
read() the device when POLLIN is set, it can still make ioctl() calls on
a device that has been removed from the system.  The node_id and
generation returned by GET_INFO will be outdated, but INITIATE_BUS_RESET
would still cause a bus reset, and GET_CYCLE_TIMER will return data.
And if you guess the correct generation to use, you can send requests to
a different device on the bus, and get responses back.

This patch prevents open, ioctl, compat_ioctl, and mmap against shutdown
devices.

Signed-off-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-05-20 18:24:17 +02:00
Stefan Richter
c9755e14a0 firewire: reread config ROM when device reset the bus
When a device changes its configuration ROM, it announces this with a
bus reset.  firewire-core has to check which node initiated a bus reset
and whether any unit directories went away or were added on this node.

Tested with an IOI FWB-IDE01AB which has its link-on bit set if bus
power is available but does not respond to ROM read requests if self
power is off.  This implements
  - recognition of the units if self power is switched on after fw-core
    gave up the initial attempt to read the config ROM,
  - shutdown of the units when self power is switched off.

Also tested with a second PC running Linux/ieee1394.  When the eth1394
driver is inserted and removed on that node, fw-core now notices the
addition and removal of the IPv4 unit on the ieee1394 node.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:36 +02:00
Stefan Richter
fae6031214 firewire: fix NULL pointer deref. and resource leak
By supplying ioctl()s in the wrong order, a userspace client was able to
trigger NULL pointer dereferences.  Furthermore, by calling
ioctl_create_iso_context more than once, new contexts could be created
without ever freeing the previously created contexts.

Thanks to Anders Blomdell for the report.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-21 19:05:56 +01:00
Stefan Richter
96b19062e7 firewire: fix "kobject_add failed for fw* with -EEXIST"
There is a race between shutdown and creation of devices:  fw-core may
attempt to add a device with the same name of an already existing
device.  http://bugzilla.kernel.org/show_bug.cgi?id=9828

Impact of the bug:  Happens rarely (when shutdown of a device coincides
with creation of another), forces the user to unplug and replug the new
device to get it working.

The fix is obvious:  Free the minor number *after* instead of *before*
device_unregister().  This requires to take an additional reference of
the fw_device as long as the IDR tree points to it.

And while we are at it, we fix an additional race condition:
fw_device_op_open() took its reference of the fw_device a little bit too
late, hence was in danger to access an already invalid fw_device.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-16 15:40:33 +01:00
Stefan Richter
b5d2a5e04e firewire: enforce access order between generation and node ID, fix "giving up on config rom"
fw_device.node_id and fw_device.generation are accessed without mutexes.
We have to ensure that all readers will get to see node_id updates
before generation updates.

Fixes an inability to recognize devices after "giving up on config rom",
https://bugzilla.redhat.com/show_bug.cgi?id=429950

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Reviewed by Nick Piggin <nickpiggin@yahoo.com.au>.

Verified to fix 'giving up on config rom' issues on multiple system and
drive combinations that were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2008-01-30 22:22:27 +01:00
Stefan Richter
cf5a56ac80 firewire: fw-cdev: use device generation, not card generation
We have to use the fw_device.generation here, not the fw_card.generation,
because the generation must never be newer than the node ID when we emit
a transaction.  This cannot be guaranteed with fw_card.generation.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Verified in concert with subsequent memory barriers patch to fix 'giving
up on config rom' issues on multiple system and drive combinations that
were previously affected.

Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-01-30 22:22:27 +01:00
Jay Fenlason
83431cba3d firewire: fw-cdev: reorder wakeup vs. spinlock
Signed-off-by: Jay Fenlason <fenlason@redhat.com>

Prompted by https://bugzilla.redhat.com/show_bug.cgi?id=323411

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:10 +02:00
Stefan Richter
a64408b96b firewire: adopt read cycle timer ABI from raw1394
This duplicates the read cycle timer feature of raw1394 (added in Linux
2.6.21) in firewire-core's userspace ABI.  The argument to the ioctl is
reordered though to ensure 32/64 bit compatibility.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-10-17 00:00:08 +02:00
Stefan Richter
930e4b7fe3 firewire: fw-core: local variable shadows a global one
Sparse warned about it although it was apparently harmless:

drivers/firewire/fw-cdev.c:624:23: warning: symbol 'interrupt' shadows an earlier one
include/asm/hw_irq.h:29:13: originally declared here

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-17 00:00:01 +02:00
Al Viro
1ccc9147f6 fw-cdev __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:51 -07:00
Stefan Richter
f139749001 firewire: support S100B...S400B and link slower than PHY
Use a speed probe to determine the speed over 1394b buses and of nodes
which report a link speed less than their PHY speed.

Log the effective maximum speed of newly created nodes in dmesg.

Also, read the config ROM (except bus info block) at the maximum speed
rather than S100.  This isn't a real optimization though because we
still only use quadlet read requests for the entire ROM.

The patch also adds support for S1600 and S3200, although such hardware
does not exist yet.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
2007-07-10 00:07:43 +02:00
Kristian Høgsberg
24315c5e6f firewire: Only set client->iso_context if allocation was successful.
This patch fixes an OOPS on cdev release for an fd where iso context
creation failed.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-06-21 00:09:41 +02:00
Kristian Høgsberg
1ca31ae7cf firewire: Change struct fw_cdev_iso_packet to not use bitfields.
The struct is part of the userspace interface and can not use
bitfields.  This patch replaces the bitfields with a __u32 'control'
word and provides access macros to set the bits.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-31 21:40:15 +02:00
Jeff Garzik
350958f984 firewire: fix return code
Fix this warning on x86-64

drivers/firewire/fw-cdev.c:798: warning: initialization from incompatible pointer type

by making the return code of ioctl_send_request() the same as all the
other ioctl_xxx() return codes.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-27 23:21:01 +02:00
Kristian Høgsberg
2d826cc5c7 firewire: Always use parens with sizeof.
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-05-10 18:24:14 +02:00
Kristian Høgsberg
c781c06d11 firewire: Clean up comment style.
Drop filenames from file preamble, drop editor annotations and
use standard indent style for block comments.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed typo)
2007-05-10 18:24:13 +02:00
Kristian Høgsberg
9640d3d775 firewire: Rename fw-device-cdev.c to fw-cdev.c and move header to include/linux.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-04-30 23:08:13 +02:00