Commit Graph

1304 Commits

Author SHA1 Message Date
Linus Torvalds
574c3fdae3 Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6:
  UBI: fix checkpatch.pl warnings
  UBI: simplify PEB protection code
  UBI: prepare for protection tree improvements
  UBI: return -ENOMEM upon failing vmalloc
  UBI: document UBI ioctls
  UBI: handle write errors in WL worker
  UBI: fix error path
  UBI: some code re-structuring
  UBI: fix deadlock
  UBI: fix warnings when debugging is enabled
2009-01-02 15:57:26 -08:00
Artem Bityutskiy
f2863c54f3 UBI: fix checkpatch.pl warnings
Just minor indentation and "over 80 characters" fixes.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-28 12:20:51 +02:00
Sascha Hauer
cb96cf1ad6 [ARM] MX3: add NAND support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16 14:58:02 +01:00
Xiaochuan-Xu
7b6c32daec UBI: simplify PEB protection code
UBI has 2 RB-trees to implement PEB protection, which is too
much for simply prevent PEB from being moved for some time.
This patch implements this using lists. The benefits:

1. No need to allocate protection entry on each PEB get.
2. No need to maintain balanced trees and walk them.

Signed-off-by: Xiaochuan-Xu <xiaochuan-xu@cqu.edu.cn>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-16 10:09:58 +02:00
Russell King
7e1548a597 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2008-12-15 22:13:26 +00:00
Xiaochuan-Xu
23553b2c08 UBI: prepare for protection tree improvements
This patch modifies @struct ubi_wl_entry and adds union which
contains only one element so far. This is just a preparation
for further changes which will kill the protection tree and
make UBI use a list instead.

Signed-off-by: Xiaochuan-Xu <xiaochuan-xu@cqu.edu.cn>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-15 19:34:50 +02:00
Russell King
72aaf09fda Merge git://git.marvell.com/orion into devel 2008-12-13 09:12:51 +00:00
Russell King
70d13e083c [ARM] netwinder: clean up GPIO naming
Netwinder was using gpio_xxx names which could clash with the GPIO
layer.  Add a 'nw_' prefix to ensure that these remain separate.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13 09:12:07 +00:00
David Brownell
15f74b0335 ARM: OMAP: use gpio_to_irq
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead.
Calls used for table initialization are left alone, at least
this time around.

(This patch is for code in both the OMAP tree and mainline.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:35:26 -08:00
David Brownell
40e3925ba1 ARM: OMAP: switch to gpio_direction_input
More switchover to the cross-platform GPIO interface:
use gpio_direction_input(), not an OMAP-specific call.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:35:26 -08:00
David Brownell
0b84b5ca43 ARM: OMAP: switch to standard gpio get/set calls
This patch replaces some legacy OMAP GPIO calls with the "new" (not
really, any more!) calls that work on most platforms.

The calls addressed by this patch are the simple ones to get and set
values ... for code that's in mainline, including the implementations
of those calls.

Except for the declarations and definitions of those calls, all of
these changes were performed by a simple SED script.  Plus, a few
"if() set() else set()" branches were merged by hand.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:35:25 -08:00
Stefan Roese
ad5942bad6 UBI: return -ENOMEM upon failing vmalloc
Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
failing vmalloc().

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-10 14:28:48 +02:00
Linus Torvalds
4d9c6a21be Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA
  [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put
  [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2
  [MTD] physmap: fix memory leak on physmap_flash_remove by using devres
  [MTD] m25p80: chip erase != block erase != sector erase
  [MTD] m25p80: fix detection of m25p16 flashes
  [MTD] m25p80: fix detection of SPI parts
  [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2)
  [MTD] [NAND] OMAP: OneNAND: header file relocation
2008-12-09 08:28:36 -08:00
Artem Bityutskiy
6fa6f5bbc3 UBI: handle write errors in WL worker
When a PEB is moved and a write error happens, UBI switches
to R/O mode, which is wrong, because we just copy the data
and may select a different PEB and re-try this. This patch
fixes WL worker's behavior.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-05 13:46:50 +02:00
Artem Bityutskiy
3c98b0a043 UBI: fix error path
Make sure the resources had not already been freed before
freeing them in the error path of the WL worker function.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-05 13:46:50 +02:00
Artem Bityutskiy
6a8f483f33 UBI: some code re-structuring
Minor code re-structuring and commentaries fixes to improve readability.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-05 13:46:49 +02:00
Artem Bityutskiy
4df581f3dc UBI: fix deadlock
We cannot call 'ubi_wl_get_peb()' with @ubi->buf_mutex locked,
because 'ubi_wl_get_peb()' may force erasure, which, in turn,
may call 'torture_peb()' which also locks the @ubi->buf_mutex
and deadlocks.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-05 13:46:49 +02:00
Artem Bityutskiy
ed45819f31 UBI: fix warnings when debugging is enabled
The 'ubi_io_read_vid_hdr()' and 'ubi_io_read_ec_hdr()' function
have the 'verbose' argument which controls whether they should
print a warning if the VID/EC header was not found or was corrupted.
Some callers require the headers to be OK, and pass 1. Some allow
a corrupted/not present header, and pass 0.

       if (UBI_IO_DEBUG)
               verbose = 1;

And UBI_IO_DEBUG is 1 if CONFIG_MTD_UBI_DEBUG_MSG_BLD is true. So in
this case the warning is printed all the time. This confuses people.

Thus, do not print the messages as warnings if UBI_IO_DEBUG is true,
but print them as debugging messages instead.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-12-03 13:24:48 +02:00
Denis V. Lunev
e93f1be503 [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA
STM 2Gb flash is a large-page NAND flash.  Set operations accordingly.
This field is dereferenced without a check in several places resulting in
OOPS.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Eric Miao <ymiao3@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-03 10:47:20 +00:00
Russell King
c5b84b3bb0 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Conflicts:

	arch/arm/mach-pxa/pxa25x.c
2008-12-02 22:07:40 +00:00
Julia Lawall
d947629891 [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put
pci_get_device increments a reference count that should be decremented
using pci_dev_put.

The semantic patch that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S,S1;
position p1,p2,p3;
expression E,E1;
type T,T1;
expression *ptr != NULL;
@@

(
 if ((x@p1 = pci_get_device(...)) == NULL) S
|
 x@p1 = pci_get_device(...);
)
 ... when != pci_dev_put(...,(T)x,...)
     when != if (...) { <+... pci_dev_put(...,(T)x,...) ...+> }
     when != true x == NULL || ...
     when != x = E
     when != E = (T)x
     when any
(
 if (x == NULL || ...) S1
|
 if@p2 (...) {
  ... when != pci_dev_put(...,(T1)x,...)
      when != if (...) { <+... pci_dev_put(...,(T1)x,...) ...+> }
      when != x = E1
      when != E1 = (T1)x
(
  return \(0\|<+...x...+>\|ptr\);
|
  return@p3 ...;
)
}
)

@ script:python @
p1 << r.p1;
p3 << r.p3;
@@

print "* file: %s pci_get_device: %s return: %s" % (p1[0].file,p1[0].line,p3[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-02 10:45:19 +00:00
Eric Miao
afb5b5c9ad [ARM] pxa: explicit #include <mach/dma.h> in various drivers
Where 'pxa_dma_desc' and 'pxa_{request,free}_dma' are referenced.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:42:26 +08:00
Linus Torvalds
e2a2444a90 Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6:
  UBI: Don't exit from ubi_thread until kthread_should_stop() is true
  UBI: fix EBADMSG handling
2008-11-30 11:34:17 -08:00
Russell King
fba670013d Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2008-11-29 19:35:07 +00:00
Russell King
e902be56cb Merge branches 'core' and 'clks' into devel 2008-11-27 12:39:14 +00:00
Russell King
e0d8b13ae1 [ARM] pxa: don't pass a consumer clock name for devices with unique clocks
Where devices only have one consumer, passing a consumer clock ID
has no real benefit.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:23 +00:00
Russell King
59f0cb0fdd [ARM] remove memzero()
As suggested by Andrew Morton, remove memzero() - it's not supported
on other architectures so use of it is a potential build breaking bug.
Since the compiler optimizes memset(x,0,n) to __memzero() perfectly
well, we don't miss out on the underlying benefits of memzero().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:37:59 +00:00
Wolfgang Grandegger
29b65861fb [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2
The patch fixes following build error:

  CC      drivers/mtd/nand/fsl_upm.o
drivers/mtd/nand/fsl_upm.c: In function 'fun_chip_init':
drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 2 of 'of_mtd_parse_partitions' from incompatible pointer type
drivers/mtd/nand/fsl_upm.c:168: warning: passing argument 3 of 'of_mtd_parse_partitions' from incompatible pointer type
drivers/mtd/nand/fsl_upm.c:168: error: too many arguments to function 'of_mtd_parse_partitions'
make[1]: *** [drivers/mtd/nand/fsl_upm.o] Error 1

The breakage was introduced in 69fd3a8d09
("[MTD] remove unused mtd parameter in of_mtd_parse_partitions()").

While at it, also add a check for the of_mtd_parse_partitions() return
value.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-27 09:46:13 +00:00
Atsushi Nemoto
3136e903fa [MTD] physmap: fix memory leak on physmap_flash_remove by using devres
physmap_flash_remove releases only last memory region.  This causes
memory leak if multiple resources were provided.

This patch fixes this leakage by using devm_ functions.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26 10:26:29 +00:00
Chen Gong
7854643a91 [MTD] m25p80: chip erase != block erase != sector erase
This fixes broken terminology added in the "m25p80.c erase enhance" patch,
which added a chip erase command but called it "block erase".  There are
already two block erase commands; blocks are 4KiB or 32KiB.  There's also
a sector erase (usually 64 KiB).  Chip erase typically covers Megabytes.

  OPCODE_BE   ==> OPCODE_CHIP_ERASE
  erase_block ==> erase_chip

[dbrownell@users.sourceforge.net: update sector erase comments too ]

Signed-off-by: Chen Gong <clumsycg@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26 10:24:27 +00:00
Mike Frysinger
9168ab861a [MTD] m25p80: fix detection of m25p16 flashes
Commit d0e8c47c58 ("m25p80.c extended jedec
support") added support for extended ids but seems to break on flashes
which don't have an extended id defined.  If the table does not have an
extid defined, then we should ignore it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26 10:23:35 +00:00
Mike Frysinger
a3d3f73ccb [MTD] m25p80: fix detection of SPI parts
Commit d0e8c47c58 ("m25p80.c extended jedec
support") added support for extended ids but in the process managed to
break detection of all flashes.

The ext jedec id check was inserted into an if statement that lacked
braces, and it did not add the required braces.  As such, the detection
routine always returns the first entry in the SPI flash list.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26 10:23:25 +00:00
Adrian Hunter
cbbd695687 [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2)
Include <linux/dma-mapping.h> and <linux/io.h>, not files from <asm/*>

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-26 10:08:13 +00:00
Adrian Hunter
fe875358a6 [MTD] [NAND] OMAP: OneNAND: header file relocation
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-24 11:37:26 +00:00
Russell King
8959dabdf2 [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13 15:05:03 +00:00
Russell King
d9a682a592 [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-13 15:04:52 +00:00
Linus Torvalds
c361948712 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [JFFS2] fix race condition in jffs2_lzo_compress()
  [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)
  [JFFS2] Fix lack of locking in thread_should_wake()
  [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER
  [MTD] [NAND] OMAP2: remove duplicated #include
2008-11-06 15:43:13 -08:00
Vitaliy Gusev
2ad4988715 UBI: Don't exit from ubi_thread until kthread_should_stop() is true
If ubi_thread() exits but kthread_should_stop() is not true
then kthread_stop() will never return and cleanup thread
will forever stay in "D" state.

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-11-06 11:13:04 +02:00
Zoltan Sogor
b77bcb0789 UBI: fix EBADMSG handling
'ubi_io_read_data()' may return EBADMSG in case of an ECC error,
and we should not panic because of this. We have CRC32 checksum
and may check the data. So just ignore the EBADMSG error.

This patch also fixes a minor spelling error at the same time.

Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-11-06 11:13:02 +02:00
Eric W. Biederman
467622ef2a [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4)
For "unlock" cycles to 16bit devices in 8bit compatibility mode we need
to use the byte addresses 0xaaa and 0x555. These effectively match
the word address 0x555 and 0x2aa, except the latter has its low bit set.

Most chips don't care about the value of the 'A-1' pin in x8 mode,
but some -- like the ST M29W320D -- do. So we need to be careful to
set it where appropriate.

cfi_send_gen_cmd is only ever passed addresses where the low byte
is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are
affected by this patch, by masking in the extra low bit when the device
is known to be in compatibility mode.

[dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa]
v4: Fix  stupid typo in cfi_build_cmd_addr that failed to compile
    I'm writing this patch way to late at night.
v3: Bring all of the work back into cfi_build_cmd_addr
    including calling of map_bankwidth(map) and cfi_interleave(cfi)
    So every caller doesn't need to.
v2: Only modified the address if we our device_type is larger than our
    bus width.

Cc: stable@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-11-05 14:40:25 +01:00
Jianjun Kong
54074d5932 drivers: remove duplicated #include
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-04 08:18:19 -08:00
Ben Dooks
7926b5a325 [ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/plat
Move nand headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30 10:17:13 +00:00
Huang Weiyi
0f0254fa8d [MTD] [NAND] OMAP2: remove duplicated #include
Removed duplicated #include <asm/arch/gpmc.h> in
drivers/mtd/onenand/omap2.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-21 13:37:33 +01:00
Al Viro
30c40d2c01 [PATCH] propagate mode through open_bdev_excl/close_bdev_excl
replace open_bdev_excl/close_bdev_excl with variants taking fmode_t.
superblock gets the value used to mount it stored in sb->s_mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:00 -04:00
Al Viro
af0e2a0a87 [PATCH] switch mtd_blkdevs
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:38 -04:00
Al Viro
d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro
aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Linus Torvalds
2be508d847 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...
2008-10-20 09:03:12 -07:00
David Woodhouse
8a1a627205 Revert "[MTD] m25p80.c code cleanup"
This reverts commit 75d0ee2202.

Although it seems ObviouslyCorrect™, the spi_write() call uses DMA,
while spi_write_then_read() does not. Since our buffer is on the stack,
we must use the latter even though we don't actually want to read
anything back.

Pointed out by David Brownell <david-b@pacbell.net>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-20 09:28:09 +01:00
David Woodhouse
7d28e0d1e5 [MTD] [NAND] GPIO driver depends on ARM... for now.
Not all architectures provide readsb(). We should probably move to using
ioread8_rep() instead.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-10-20 09:24:43 +01:00