Commit Graph

4385 Commits

Author SHA1 Message Date
Thomas Gleixner
7edaeb6841 kernel/watchdog: Prevent false positives with turbo modes
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.

The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.

A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.

Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.

That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.

Fixes: 58687acba5 ("lockup_detector: Combine nmi_watchdog and softlockup detector")
Reported-and-tested-by: Kan Liang <Kan.liang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dzickus@redhat.com
Cc: prarit@redhat.com
Cc: ak@linux.intel.com
Cc: babu.moger@oracle.com
Cc: peterz@infradead.org
Cc: eranian@google.com
Cc: acme@redhat.com
Cc: stable@vger.kernel.org
Cc: atomlin@redhat.com
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1708150931310.1886@nanos
2017-08-18 12:35:02 +02:00
Akinobu Mita
9eeb52ae71 fault-inject: fix wrong should_fail() decision in task context
Commit 1203c8e6fb ("fault-inject: simplify access check for fail-nth")
unintentionally broke a conditional statement in should_fail().  Any
faults are not injected in the task context by the change when the
systematic fault injection is not used.

This change restores to the previous correct behaviour.

Link: http://lkml.kernel.org/r/1501633700-3488-1-git-send-email-akinobu.mita@gmail.com
Fixes: 1203c8e6fb ("fault-inject: simplify access check for fail-nth")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Tested-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:06 -07:00
Dan Carpenter
4e98ebe5f4 test_kmod: fix small memory leak on filesystem tests
The break was in the wrong place so file system tests don't work as
intended, leaking memory at each test switch.

[mcgrof@kernel.org: massaged commit subject, noted memory leak issue without the fix]
Link: http://lkml.kernel.org/r/20170802211450.27928-6-mcgrof@kernel.org
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:06 -07:00
Dan Carpenter
9c56771316 test_kmod: fix the lock in register_test_dev_kmod()
We accidentally just drop the lock twice instead of taking it and then
releasing it.  This isn't a big issue unless you are adding more than
one device to test on, and the kmod.sh doesn't do that yet, however this
obviously is the correct thing to do.

[mcgrof@kernel.org: massaged subject, explain what happens]
Link: http://lkml.kernel.org/r/20170802211450.27928-5-mcgrof@kernel.org
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:06 -07:00
Luis R. Rodriguez
434b06ae23 test_kmod: fix bug which allows negative values on two config options
Parsing with kstrtol() enables values to be negative, and we failed to
check for negative values when parsing with test_dev_config_update_uint_sync()
or test_dev_config_update_uint_range().

test_dev_config_update_uint_range() has a minimum check though so an
issue is not present there.  test_dev_config_update_uint_sync() is only
used for the number of threads to use (config_num_threads_store()), and
indeed this would fail with an attempt for a large allocation.

Although the issue is only present in practice with the first fix both
by using kstrtoul() instead of kstrtol().

Link: http://lkml.kernel.org/r/20170802211450.27928-4-mcgrof@kernel.org
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:06 -07:00
Colin Ian King
a4afe8cdec test_kmod: fix spelling mistake: "EMTPY" -> "EMPTY"
Trivial fix to spelling mistake in snprintf text

[mcgrof@kernel.org: massaged commit message]
Link: http://lkml.kernel.org/r/20170802211450.27928-3-mcgrof@kernel.org
Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-10 15:54:06 -07:00
Linus Torvalds
bc78d646e7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Handle notifier registry failures properly in tun/tap driver, from
    Tonghao Zhang.

 2) Fix bpf verifier handling of subtraction bounds and add a testcase
    for this, from Edward Cree.

 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.

 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
    from Cong Wang.

 5) Fix SElinux regression due to recent UDP optimizations, from Paolo
    Abeni.

 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
    paths, fix from Stefano Brivio.

 7) Fix some mem leaks in dccp, from Xin Long.

 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
    Bergmann.

 9) Mac address length check and buffer size fixes from Cong Wang.

10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.

11) Fix return value when copy_from_user() fails in
    bpf_prog_get_info_by_fd(), from Daniel Borkmann.

12) Handle PHY_HALTED properly in phy library state machine, from
    Florian Fainelli.

13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.

14) Fix truesize calculation in virtio_net which led to performance
    regressions, from Michael S Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  samples/bpf: fix bpf tunnel cleanup
  udp6: fix jumbogram reception
  ppp: Fix a scheduling-while-atomic bug in del_chan
  Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
  virtio_net: fix truesize for mergeable buffers
  mv643xx_eth: fix of_irq_to_resource() error check
  MAINTAINERS: Add more files to the PHY LIBRARY section
  ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
  net: phy: Correctly process PHY_HALTED in phy_stop_machine()
  sunhme: fix up GREG_STAT and GREG_IMASK register offsets
  bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
  tcp: avoid bogus gcc-7 array-bounds warning
  net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
  bpf: don't indicate success when copy_from_user fails
  udp6: fix socket leak on early demux
  net: thunderx: Fix BGX transmit stall due to underflow
  Revert "vhost: cache used event for better performance"
  team: use a larger struct for mac address
  net: check dev->addr_len for dev_set_mac_address()
  phy: bcm-ns-usb3: fix MDIO_BUS dependency
  ...
2017-07-31 22:36:42 -07:00
Phil Sutter
783692558a lib: test_rhashtable: Fix KASAN warning
I forgot one spot when introducing struct test_obj_val.

Fixes: e859afe1ee ("lib: test_rhashtable: fix for large entry counts")
Reported by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25 12:35:23 -07:00
Phil Sutter
e859afe1ee lib: test_rhashtable: fix for large entry counts
During concurrent access testing, threadfunc() concatenated thread ID
and object index to create a unique key like so:

| tdata->objs[i].value = (tdata->id << 16) | i;

This breaks if a user passes an entries parameter of 64k or higher,
since 'i' might use more than 16 bits then. Effectively, this will lead
to duplicate keys in the table.

Fix the problem by introducing a struct holding object and thread ID and
using that as key instead of a single integer type field.

Fixes: f4a3e90ba5 ("rhashtable-test: extend to test concurrency")
Reported by: Manuel Messner <mm@skelett.io>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 14:13:58 -07:00
Christoph Hellwig
d9cf484165 uuid: fix incorrect uuid_equal conversion in test_uuid_test
Fixes: df33767d ("uuid: hoist helpers uuid_equal() and uuid_copy() from xfs")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-07-21 09:38:30 +02:00
Linus Torvalds
52f6c588c7 Add wait_for_random_bytes() and get_random_*_wait() functions so that
callers can more safely get random bytes if they can block until the
 CRNG is initialized.
 
 Also print a warning if get_random_*() is called before the CRNG is
 initialized.  By default, only one single-line warning will be printed
 per boot.  If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
 warning will be printed for each function which tries to get random
 bytes before the CRNG is initialized.  This can get spammy for certain
 architecture types, so it is not enabled by default.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllqXNUACgkQ8vlZVpUN
 gaPtAgf/aUbXZuWYsDQzslHsbzEWi+qz4QgL885/w4L00pEImTTp91Q06SDxWhtB
 KPvGnZHS3IofxBh2DC+6AwN6dPMoWDCfYhhO6po3FSz0DiPRIQCTuvOb8fhKY1X7
 rTdDq2xtDxPGxJ25bMJtlrgzH2XlXPpVyPUeoc9uh87zUK5aesXpUn9kBniRexoz
 ume+M/cDzPKkwNQpbLq8vzhNjoWMVv0FeW2akVvrjkkWko8nZLZ0R/kIyKQlRPdG
 LZDXcz0oTHpDS6+ufEo292ZuWm2IGer2YtwHsKyCAsyEWsUqBz2yurtkSj3mAVyC
 hHafyS+5WNaGdgBmg0zJxxwn5qxxLg==
 =ua7p
 -----END PGP SIGNATURE-----

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

Pull random updates from Ted Ts'o:
 "Add wait_for_random_bytes() and get_random_*_wait() functions so that
  callers can more safely get random bytes if they can block until the
  CRNG is initialized.

  Also print a warning if get_random_*() is called before the CRNG is
  initialized. By default, only one single-line warning will be printed
  per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
  warning will be printed for each function which tries to get random
  bytes before the CRNG is initialized. This can get spammy for certain
  architecture types, so it is not enabled by default"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: reorder READ_ONCE() in get_random_uXX
  random: suppress spammy warnings about unseeded randomness
  random: warn when kernel uses unseeded randomness
  net/route: use get_random_int for random counter
  net/neighbor: use get_random_u32 for 32-bit hash random
  rhashtable: use get_random_u32 for hash_rnd
  ceph: ensure RNG is seeded before using
  iscsi: ensure RNG is seeded before use
  cifs: use get_random_u32 for 32-bit lock random
  random: add get_random_{bytes,u32,u64,int,long,once}_wait family
  random: add wait_for_random_bytes() API
2017-07-15 12:44:02 -07:00
Theodore Ts'o
eecabf5674 random: suppress spammy warnings about unseeded randomness
Unfortunately, on some models of some architectures getting a fully
seeded CRNG is extremely difficult, and so this can result in dmesg
getting spammed for a surprisingly long time.  This is really bad from
a security perspective, and so architecture maintainers really need to
do what they can to get the CRNG seeded sooner after the system is
booted.  However, users can't do anything actionble to address this,
and spamming the kernel messages log will only just annoy people.

For developers who want to work on improving this situation,
CONFIG_WARN_UNSEEDED_RANDOM has been renamed to
CONFIG_WARN_ALL_UNSEEDED_RANDOM.  By default the kernel will always
print the first use of unseeded randomness.  This way, hopefully the
security obsessed will be happy that there is _some_ indication when
the kernel boots there may be a potential issue with that architecture
or subarchitecture.  To see all uses of unseeded randomness,
developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-07-15 12:19:28 -04:00
Luis R. Rodriguez
d9c6a72d6f kmod: add test driver to stress test the module loader
This adds a new stress test driver for kmod: the kernel module loader.
The new stress test driver, test_kmod, is only enabled as a module right
now.  It should be possible to load this as built-in and load tests
early (refer to the force_init_test module parameter), however since a
lot of test can get a system out of memory fast we leave this disabled
for now.

Using a system with 1024 MiB of RAM can *easily* get your kernel OOM
fast with this test driver.

The test_kmod driver exposes API knobs for us to fine tune simple
request_module() and get_fs_type() calls.  Since these API calls only
allow each one parameter a test driver for these is rather simple.
Other factors that can help out test driver though are the number of
calls we issue and knowing current limitations of each.  This exposes
configuration as much as possible through userspace to be able to build
tests directly from userspace.

Since it allows multiple misc devices its will eventually (once we add a
knob to let us create new devices at will) also be possible to perform
more tests in parallel, provided you have enough memory.

We only enable tests we know work as of right now.

Demo screenshots:

 # tools/testing/selftests/kmod/kmod.sh
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0002_driver: OK! - loading kmod test
kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0002_fs: OK! - loading kmod test
kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0003: OK! - loading kmod test
kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0004: OK! - loading kmod test
kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
XXX: add test restult for 0007
Test completed

You can also request for specific tests:

 # tools/testing/selftests/kmod/kmod.sh -t 0001
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
Test completed

Lastly, the current available number of tests:

 # tools/testing/selftests/kmod/kmod.sh --help
Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ]
Valid tests: 0001-0009

0001 - Simple test - 1 thread  for empty string
0002 - Simple test - 1 thread  for modules/filesystems that do not exist
0003 - Simple test - 1 thread  for get_fs_type() only
0004 - Simple test - 2 threads for get_fs_type() only
0005 - multithreaded tests with default setup - request_module() only
0006 - multithreaded tests with default setup - get_fs_type() only
0007 - multithreaded tests with default setup test request_module() and get_fs_type()
0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module()
0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()

The following test cases currently fail, as such they are not currently
enabled by default:

 # tools/testing/selftests/kmod/kmod.sh -t 0008
 # tools/testing/selftests/kmod/kmod.sh -t 0009

To be sure to run them as intended please unload both of the modules:

  o test_module
  o xfs

And ensure they are not loaded on your system prior to testing them.  If
you use these paritions for your rootfs you can change the default test
driver used for get_fs_type() by exporting it into your environment.  For
example of other test defaults you can override refer to kmod.sh
allow_user_defaults().

Behind the scenes this is how we fine tune at a test case prior to
hitting a trigger to run it:

cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case
echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs
echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads
cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads

Finally to trigger:

echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config

The kmod.sh script uses the above constructs to build different test cases.

A bit of interpretation of the current failures follows, first two
premises:

a) When request_module() is used userspace figures out an optimized
   version of module order for us.  Once it finds the modules it needs, as
   per depmod symbol dep map, it will finit_module() the respective
   modules which are needed for the original request_module() request.

b) We have an optimization in place whereby if a kernel uses
   request_module() on a module already loaded we never bother userspace
   as the module already is loaded.  This is all handled by kernel/kmod.c.

A few things to consider to help identify root causes of issues:

0) kmod 19 has a broken heuristic for modules being assumed to be
   built-in to your kernel and will return 0 even though request_module()
   failed.  Upgrade to a newer version of kmod.

1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs",
   not for "xfs".  The optimization in kernel described in b) fails to
   catch if we have a lot of consecutive get_fs_type() calls.  The reason
   is the optimization in place does not look for aliases.  This means two
   consecutive get_fs_type() calls will bump kmod_concurrent, whereas
   request_module() will not.

This one explanation why test case 0009 fails at least once for
get_fs_type().

2) If a module fails to load --- for whatever reason (kmod_concurrent
   limit reached, file not yet present due to rootfs switch, out of
   memory) we have a period of time during which module request for the
   same name either with request_module() or get_fs_type() will *also*
   fail to load even if the file for the module is ready.

This explains why *multiple* NULLs are possible on test 0009.

3) finit_module() consumes quite a bit of memory.

4) Filesystems typically also have more dependent modules than other
   modules, its important to note though that even though a get_fs_type()
   call does not incur additional kmod_concurrent bumps, since userspace
   loads dependencies it finds it needs via finit_module_fd(), it *will*
   take much more memory to load a module with a lot of dependencies.

Because of 3) and 4) we will easily run into out of memory failures with
certain tests.  For instance test 0006 fails on qemu with 1024 MiB of RAM.
It panics a box after reaping all userspace processes and still not
having enough memory to reap.

[arnd@arndb.de: add dependencies for test module]
  Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14 15:05:13 -07:00
Akinobu Mita
1203c8e6fb fault-inject: simplify access check for fail-nth
The fail-nth file is created with 0666 and the access is permitted if
and only if the task is current.

This file is owned by the currnet user.  So we can create it with 0644
and allow the owner to write it.  This enables to watch the status of
task->fail_nth from another processes.

[akinobu.mita@gmail.com: don't convert unsigned type value as signed int]
  Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com
[akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth]
  Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com
Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14 15:05:13 -07:00
Michael Ellerman
ffba19ccae lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
atomic64_inc_not_zero() returns a "truth value" which in C is
traditionally an int.  That means callers are likely to expect the
result will fit in an int.

If an implementation returns a "true" value which does not fit in an
int, then there's a possibility that callers will truncate it when they
store it in an int.

In fact this happened in practice, see commit 966d2b04e0
("percpu-refcount: fix reference leak during percpu-atomic transition").

So add a test that the result fits in an int, even when the input
doesn't.  This catches the case where an implementation just passes the
non-zero input value out as the result.

Link: http://lkml.kernel.org/r/1499775133-1231-1-git-send-email-mpe@ellerman.id.au
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14 15:05:13 -07:00
Nikolay Borisov
3e8f399da4 writeback: rework wb_[dec|inc]_stat family of functions
Currently the writeback statistics code uses a percpu counters to hold
various statistics.  Furthermore we have 2 families of functions - those
which disable local irq and those which doesn't and whose names begin
with double underscore.  However, they both end up calling
__add_wb_stats which in turn calls percpu_counter_add_batch which is
already irq-safe.

Exploiting this fact allows to eliminated the __wb_* functions since
they don't add any further protection than we already have.
Furthermore, refactor the wb_* function to call __add_wb_stat directly
without the irq-disabling dance.  This will likely result in better
runtime of code which deals with modifying the stat counters.

While at it also document why percpu_counter_add_batch is in fact
preempt and irq-safe since at least 3 people got confused.

Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:05 -07:00
Daniel Micay
6974f0c455 include/linux/string.h: add the option of fortified string.h functions
This adds support for compiling with a rough equivalent to the glibc
_FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer
overflow checks for string.h functions when the compiler determines the
size of the source or destination buffer at compile-time.  Unlike glibc,
it covers buffer reads in addition to writes.

GNU C __builtin_*_chk intrinsics are avoided because they would force a
much more complex implementation.  They aren't designed to detect read
overflows and offer no real benefit when using an implementation based
on inline checks.  Inline checks don't add up to much code size and
allow full use of the regular string intrinsics while avoiding the need
for a bunch of _chk functions and per-arch assembly to avoid wrapper
overhead.

This detects various overflows at compile-time in various drivers and
some non-x86 core kernel code.  There will likely be issues caught in
regular use at runtime too.

Future improvements left out of initial implementation for simplicity,
as it's all quite optional and can be done incrementally:

* Some of the fortified string functions (strncpy, strcat), don't yet
  place a limit on reads from the source based on __builtin_object_size of
  the source buffer.

* Extending coverage to more string functions like strlcat.

* It should be possible to optionally use __builtin_object_size(x, 1) for
  some functions (C strings) to detect intra-object overflows (like
  glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative
  approach to avoid likely compatibility issues.

* The compile-time checks should be made available via a separate config
  option which can be enabled by default (or always enabled) once enough
  time has passed to get the issues it catches fixed.

Kees said:
 "This is great to have. While it was out-of-tree code, it would have
  blocked at least CVE-2016-3858 from being exploitable (improper size
  argument to strlcpy()). I've sent a number of fixes for
  out-of-bounds-reads that this detected upstream already"

[arnd@arndb.de: x86: fix fortified memcpy]
  Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de
[keescook@chromium.org: avoid panic() in favor of BUG()]
  Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast
[keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help]
Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com
Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org
Signed-off-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Nicholas Piggin
05a4a95279 kernel/watchdog: split up config options
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split
HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR.

LOCKUP_DETECTOR implies the general boot, sysctl, and programming
interfaces for the lockup detectors.

An architecture that wants to use a hard lockup detector must define
HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH.

Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the
minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and
does not implement the LOCKUP_DETECTOR interfaces.

sparc is unusual in that it has started to implement some of the
interfaces, but not fully yet.  It should probably be converted to a full
HAVE_HARDLOCKUP_DETECTOR_ARCH.

[npiggin@gmail.com: fix]
  Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com
Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:02 -07:00
Dmitry Vyukov
e41d58185f fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

 "Write to this file of integer N makes N-th call in the current task
  fail (N is 0-based). Read from this file returns a single char 'Y' or
  'N' that says if the fault setup with a previous write to this file
  was injected or not, and disables the fault if it wasn't yet injected.
  Note that this file enables all types of faults (slab, futex, etc).
  This setting takes precedence over all other generic settings like
  probability, interval, times, etc. But per-capability settings (e.g.
  fail_futex/ignore-private) take precedence over it. This feature is
  intended for systematic testing of faults in a single system call. See
  an example below"

Why add a new setting:
1. Existing settings are global rather than per-task.
   So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
   which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
   of all of probability, interval, times, space, task-filter and
   unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
   types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
   stress testing better be done from an unprivileged user.
   Similarly, this would require opening the debugfs files to the
   unprivileged user, as he would need to reopen at least times file
   (not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

We want to integrate this into syzkaller fuzzer.  A prototype has found
10 bugs in kernel in first day of usage:

  https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

I've made the current interface work with all types of our sandboxes.
For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to
make /proc entries non-root owned.  So I am fine with the current
version of the code.

[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:01 -07:00
Luis R. Rodriguez
7c43a657a4 test_sysctl: test against int proc_dointvec() array support
Add a few initial respective tests for an array:

  o Echoing values separated by spaces works
  o Echoing only first elements will set first elements
  o Confirm PAGE_SIZE limit still applies even if an array is used

Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
2920fad3a5 test_sysctl: add simple proc_douintvec() case
Test against a simple proc_douintvec() case.  While at it, add a test
against UINT_MAX.  Make sure UINT_MAX works, and UINT_MAX+1 will fail
and that negative values are not accepted.

Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
eb965eda1c test_sysctl: add simple proc_dointvec() case
Test against a simple proc_dointvec() case.  While at it, add a test
against INT_MAX.  Make sure INT_MAX works, and INT_MAX+1 will fail.
Also test negative values work.

Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
9308f2f9e7 test_sysctl: add dedicated proc sysctl test driver
The existing tools/testing/selftests/sysctl/ tests include two test
cases, but these use existing production kernel sysctl interfaces.  We
want to expand test coverage but we can't just be looking for random
safe production values to poke at, that's just insane!

Instead just dedicate a test driver for debugging purposes and port the
existing scripts to use it.  This will make it easier for further tests
to be added.

Subsequent patches will extend our test coverage for sysctl.

The stress test driver uses a new license (GPL on Linux, copyleft-next
outside of Linux).  Linus was fine with this [0] and later due to Ted's
and Alans's request ironed out an "or" language clause to use [1] which
is already present upstream.

[0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com
[1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com

Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Sergey Senozhatsky
166a0f780a lib/bsearch.c: micro-optimize pivot position calculation
There is a slightly faster way (in terms of the number of instructions
being used) to calculate the position of a middle element, preserving
integer overflow safeness.

./scripts/bloat-o-meter lib/bsearch.o.old lib/bsearch.o.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function                                     old     new   delta
bsearch                                      122      98     -24

TEST

INT array of size 100001, elements [0..100000]. gcc 7.1, Os, x86_64.

a) bsearch() of existing key "100001 - 2":

BASE
====

$ perf stat ./a.out

 Performance counter stats for './a.out':

        619.445196      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               133      page-faults:u             #    0.215 K/sec
     1,949,517,279      cycles:u                  #    3.147 GHz                      (83.06%)
       181,017,938      stalled-cycles-frontend:u #    9.29% frontend cycles idle     (83.05%)
        82,959,265      stalled-cycles-backend:u  #    4.26% backend cycles idle      (67.02%)
     4,355,706,383      instructions:u            #    2.23  insn per cycle
                                                  #    0.04  stalled cycles per insn  (83.54%)
     1,051,539,242      branches:u                # 1697.550 M/sec                    (83.54%)
        15,263,381      branch-misses:u           #    1.45% of all branches          (83.43%)

       0.620082548 seconds time elapsed

PATCHED
=======

$ perf stat ./a.out

 Performance counter stats for './a.out':

        475.097316      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               135      page-faults:u             #    0.284 K/sec
     1,487,467,717      cycles:u                  #    3.131 GHz                      (82.95%)
       186,537,162      stalled-cycles-frontend:u #   12.54% frontend cycles idle     (82.93%)
        28,797,869      stalled-cycles-backend:u  #    1.94% backend cycles idle      (67.10%)
     3,807,564,203      instructions:u            #    2.56  insn per cycle
                                                  #    0.05  stalled cycles per insn  (83.57%)
     1,049,344,291      branches:u                # 2208.693 M/sec                    (83.60%)
             5,485      branch-misses:u           #    0.00% of all branches          (83.58%)

       0.475760235 seconds time elapsed

b) bsearch() of un-existing key "100001 + 2":

BASE
====

$ perf stat ./a.out

 Performance counter stats for './a.out':

        499.244480      task-clock:u (msec)       #    0.999 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               132      page-faults:u             #    0.264 K/sec
     1,571,194,855      cycles:u                  #    3.147 GHz                      (83.18%)
        13,450,980      stalled-cycles-frontend:u #    0.86% frontend cycles idle     (83.18%)
        21,256,072      stalled-cycles-backend:u  #    1.35% backend cycles idle      (66.78%)
     4,171,197,909      instructions:u            #    2.65  insn per cycle
                                                  #    0.01  stalled cycles per insn  (83.68%)
     1,009,175,281      branches:u                # 2021.405 M/sec                    (83.79%)
             3,122      branch-misses:u           #    0.00% of all branches          (83.37%)

       0.499871144 seconds time elapsed

PATCHED
=======

$ perf stat ./a.out

 Performance counter stats for './a.out':

        399.023499      task-clock:u (msec)       #    0.998 CPUs utilized
                 0      context-switches:u        #    0.000 K/sec
                 0      cpu-migrations:u          #    0.000 K/sec
               134      page-faults:u             #    0.336 K/sec
     1,245,793,991      cycles:u                  #    3.122 GHz                      (83.39%)
        11,529,273      stalled-cycles-frontend:u #    0.93% frontend cycles idle     (83.46%)
        12,116,311      stalled-cycles-backend:u  #    0.97% backend cycles idle      (66.92%)
     3,679,710,005      instructions:u            #    2.95  insn per cycle
                                                  #    0.00  stalled cycles per insn  (83.47%)
     1,009,792,625      branches:u                # 2530.660 M/sec                    (83.46%)
             2,590      branch-misses:u           #    0.00% of all branches          (83.12%)

       0.399733539 seconds time elapsed

Link: http://lkml.kernel.org/r/20170607150457.5905-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Thomas Meyer
a94c33dd1f lib/extable.c: use bsearch() library function in search_extable()
[thomas@m3y3r.de: v3: fix arch specific implementations]
  Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.de
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Michal Hocko
12e8fd6fd3 lib/rhashtable.c: use kvzalloc() in bucket_table_alloc() when possible
bucket_table_alloc() can be currently called with GFP_KERNEL or
GFP_ATOMIC.  For the former we basically have an open coded kvzalloc()
while the later only uses kzalloc().  Let's simplify the code a bit by
the dropping the open coded path and replace it with kvzalloc().

Link: http://lkml.kernel.org/r/20170531155145.17111-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
c46ecce431 lib/interval_tree_test.c: allow full tree search
...  such that a user can specify visiting all the nodes in the tree
(intersects with the world).  This is a nice opposite from the very
basic default query which is a single point.

Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
a8ec14d4f6 lib/interval_tree_test.c: allow users to limit scope of endpoint
Add a 'max_endpoint' parameter such that users may easily limit the size
of the intervals that are randomly generated.

Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
a54dae0338 lib/interval_tree_test.c: make test options module parameters
Allows for more flexible debugging.

Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Davidlohr Bueso
0f789b6764 lib/interval_tree_test.c: allow the module to be compiled-in
Patch series "lib/interval_tree_test: some debugging improvements".

Here are some patches that update the interval_tree_test module allowing
users to pass finer grained options to run the actual test.

This patch (of 4):

It is a tristate after all, and also serves well for quick debugging.

Link: http://lkml.kernel.org/r/20170518174936.20265-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:35 -07:00
Alexey Dobriyan
be5f3c7774 lib/kstrtox.c: use "unsigned int" more
gcc does generates stupid code sign extending data back and forth.  Help
by using "unsigned int".

	add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-61 (-61)
	function                                     old     new   delta
	_parse_integer                               128     123      -5

It _still_ does generate useless MOVSX but I don't know how to delete it:

0000000000000070 <_parse_integer>:
			...
  a0:   89 c2                   mov    edx,eax
  a2:   83 e8 30                sub    eax,0x30
  a5:   83 f8 09                cmp    eax,0x9
  a8:   76 11                   jbe    bb <_parse_integer+0x4b>
  aa:   83 ca 20                or     edx,0x20
  ad:   0f be c2      ===>      movsx  eax,dl         <===
			useless
  b0:   8d 50 9f                lea    edx,[rax-0x61]
  b3:   83 fa 05                cmp    edx,0x5

Patch also helps on embedded archs which generally only like "int".  On
arm "and 0xff" is generated which is waste because all values used in
comparisons are positive.

Link: http://lkml.kernel.org/r/20170514194720.GB32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Alexey Dobriyan
512750ef8b lib/kstrtox.c: delete end-of-string test
Standard "while (*s)" test is unnecessary because NUL won't pass
valid-digit test anyway.  Save one branch per parsed character.

Link: http://lkml.kernel.org/r/20170514193756.GA32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Matthew Wilcox
e5af323c9b bitmap: optimise bitmap_set and bitmap_clear of a single bit
We have eight users calling bitmap_clear for a single bit and seventeen
calling bitmap_set for a single bit.  Rather than fix all of them to
call __clear_bit or __set_bit, turn bitmap_clear and bitmap_set into
inline functions and make this special case efficient.

Link: http://lkml.kernel.org/r/20170628153221.11322-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Matthew Wilcox
3cc78125a0 lib/test_bitmap.c: add optimisation tests
Patch series "Bitmap optimisations", v2.

These three bitmap patches use more efficient specialisations when the
compiler can figure out that it's safe to do so.  Thanks to Rasmus's
eagle eyes, a nasty bug in v1 was avoided, and I've added a test case
which would have caught it.

This patch (of 4):

This version of the test is actually a no-op; the next patch will enable
it.

Link: http://lkml.kernel.org/r/20170628153221.11322-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10 16:32:34 -07:00
Linus Torvalds
2ceedf97ae dmaengine updates for 4.13-rc1
- removal of AVR32 support in dw driver as AVR32 is gone
  - new driver for Broadcom stream buffer accelerator (SBA) RAID driver
  - add support for Faraday Technology FTDMAC020 in amba-pl08x driver
  - IOMMU support in pl330 driver
  - updates to bunch of drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZYG73AAoJEHwUBw8lI4NH+DoP/1f0TsYrQFCjNqa4nybjU1Sd
 bbqnpouuJscwt8Qk2LGuSimi0QG91gQOLvrmueFbXtEg86nPOfa0RnWGNF4qwYFK
 oliDlXF2PnV65J5kl7CvqXCj6bFiXCULVdO9JD2HFoFB1+lzXN9JQqOG5ne29BQ6
 g3HNRlUTXNzQXWisgbAOLxuuvyfv68Zo3wCLYLkd4vC/C4zmxM+KXUG8+s0hS7t3
 AOUpYW6F/C+y1Ax+SiACm0QGNZ4rc6/+ZUIIXUO5CfTYGjv6QUdzxiLHtc4br25l
 2CoN9IP4V/OxHaW9T1jA61TeAAFr63oXYfDMBBzclzVryZRAIU72ups31uRQXpFz
 99zUQ0OsdOCvy0oPInhNd8u+cpyh/4e2RDgSZ9rxw3xVaKFh8lsw5OtcCBQzCMeI
 xgFCUBHsLjEi4uafJcl6n2T7+Y4Y0KgOmxPHZo3tpq/2a5M6tVy8k68m3afCQylF
 1SOxzVZdDRUutPpviQWop6RgP0EcVuzaUJ0vO4nat4j77vuimaPqdk+oLV46XP2d
 5I52kcvbVI4BbJavTjVs3FRdcez0pW37iOw+5MOxHE3dnBp4X/3btFzBY4aOsdg0
 wVut3B+9U4WHDBF2ConBxxMvGqMYmcssOQ096GdC6oBHHS7x6n7tEVPiZ5iUacn5
 LB8k9AZtpBC7nUWPH7FS
 =srPZ
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...
2017-07-08 12:36:50 -07:00
Linus Torvalds
6a37e94009 Merge branch 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter hardening from Al Viro:
 "This is the iov_iter/uaccess/hardening pile.

  For one thing, it trims the inline part of copy_to_user/copy_from_user
  to the minimum that *does* need to be inlined - object size checks,
  basically. For another, it sanitizes the checks for iov_iter
  primitives. There are 4 groups of checks: access_ok(), might_fault(),
  object size and KASAN.

   - access_ok() had been verified by whoever had set the iov_iter up.
     However, that has happened in a function far away, so proving that
     there's no path to actual copying bypassing those checks is hard
     and proving that iov_iter has not been buggered in the meanwhile is
     also not pleasant. So we want those redone in actual
     copyin/copyout.

   - might_fault() is better off consolidated - we know whether it needs
     to be checked as soon as we enter iov_iter primitive and observe
     the iov_iter flavour. No need to wait until the copyin/copyout. The
     call chains are short enough to make sure we won't miss anything -
     in fact, it's more robust that way, since there are cases where we
     do e.g. forced fault-in before getting to copyin/copyout. It's not
     quite what we need to check (in particular, combination of
     iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
     cause to skip checks), but that's for later series. For now let's
     keep might_fault().

   - KASAN checks belong in copyin/copyout - at the same level where
     other iov_iter flavours would've hit them in memcpy().

   - object size checks should apply to *all* iov_iter flavours, not
     just iovec-backed ones.

  There are two groups of primitives - one gets the kernel object
  described as pointer + size (copy_to_iter(), etc.) while another gets
  it as page + offset + size (copy_page_to_iter(), etc.)

  For the first group the checks are best done where we actually have a
  chance to find the object size. In other words, those belong in inline
  wrappers in uio.h, before calling into iov_iter.c. Same kind as we
  have for inlined part of copy_to_user().

  For the second group there is no object to look at - offset in page is
  just a number, it bears no type information. So we do them in the
  common helper called by iov_iter.c primitives of that kind. All it
  currently does is checking that we are not trying to access outside of
  the compound page; eventually we might want to add some sanity checks
  on the page involved.

  So the things we need in copyin/copyout part of iov_iter.c do not
  quite match anything in uaccess.h (we want no zeroing, we *do* want
  access_ok() and KASAN and we want no might_fault() or object size
  checks done on that level). OTOH, these needs are simple enough to
  provide a couple of helpers (static in iov_iter.c) doing just what we
  need..."

* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: saner checks on copyin/copyout
  iov_iter: sanity checks for copy to/from page primitives
  iov_iter/hardening: move object size checks to inlined part
  copy_{to,from}_user(): consolidate object size checks
  copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
2017-07-07 20:39:20 -07:00
Linus Torvalds
088737f44b Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXhmCAAoJEAAOaEEZVoIVpRkP/1qlYn3pq6d5Kuz84pejOmlL
 5jbkS/cOmeTxeUU4+B1xG8Lx7bAk8PfSXQOADbSJGiZd0ug95tJxplFYIGJzR/tG
 aNMHeu/BVKKhUKORGuKR9rJKtwC839L/qao+yPBo5U3mU4L73rFWX8fxFuhSJ8HR
 hvkgBu3Hx6GY59CzxJ8iJzj+B+uPSFrNweAk0+0UeWkBgTzEdiGqaXBX4cHIkq/5
 hMoCG+xnmwHKbCBsQ5js+YJT+HedZ4lvfjOqGxgElUyjJ7Bkt/IFYOp8TUiu193T
 tA4UinDjN8A7FImmIBIftrECmrAC9HIGhGZroYkMKbb8ReDR2ikE5FhKEpuAGU3a
 BXBgX2mPQuArvZWM7qeJCkxV9QJ0u/8Ykbyzo30iPrICyrzbEvIubeB/mDA034+Z
 Z0/z8C3v7826F3zP/NyaQEojUgRq30McMOIS8GMnx15HJwRsRKlzjfy9Wm4tWhl0
 t3nH1jMqAZ7068s6rfh/oCwdgGOwr5o4hW/bnlITzxbjWQUOnZIe7KBxIezZJ2rv
 OcIwd5qE8PNtpagGj5oUbnjGOTkERAgsMfvPk5tjUNt28/qUlVs2V0aeo47dlcsh
 oYr8WMOIzw98Rl7Bo70mplLrqLD6nGl0LfXOyUlT4STgLWW4ksmLVuJjWIUxcO/0
 yKWjj9wfYRQ0vSUqhsI5
 =3Z93
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull Writeback error handling updates from Jeff Layton:
 "This pile represents the bulk of the writeback error handling fixes
  that I have for this cycle. Some of the earlier patches in this pile
  may look trivial but they are prerequisites for later patches in the
  series.

  The aim of this set is to improve how we track and report writeback
  errors to userland. Most applications that care about data integrity
  will periodically call fsync/fdatasync/msync to ensure that their
  writes have made it to the backing store.

  For a very long time, we have tracked writeback errors using two flags
  in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
  writeback error occurs (via mapping_set_error) and are cleared as a
  side-effect of filemap_check_errors (as you noted yesterday). This
  model really sucks for userland.

  Only the first task to call fsync (or msync or fdatasync) will see the
  error. Any subsequent task calling fsync on a file will get back 0
  (unless another writeback error occurs in the interim). If I have
  several tasks writing to a file and calling fsync to ensure that their
  writes got stored, then I need to have them coordinate with one
  another. That's difficult enough, but in a world of containerized
  setups that coordination may even not be possible.

  But wait...it gets worse!

  The calls to filemap_check_errors can be buried pretty far down in the
  call stack, and there are internal callers of filemap_write_and_wait
  and the like that also end up clearing those errors. Many of those
  callers ignore the error return from that function or return it to
  userland at nonsensical times (e.g. truncate() or stat()). If I get
  back -EIO on a truncate, there is no reason to think that it was
  because some previous writeback failed, and a subsequent fsync() will
  (incorrectly) return 0.

  This pile aims to do three things:

   1) ensure that when a writeback error occurs that that error will be
      reported to userland on a subsequent fsync/fdatasync/msync call,
      regardless of what internal callers are doing

   2) report writeback errors on all file descriptions that were open at
      the time that the error occurred. This is a user-visible change,
      but I think most applications are written to assume this behavior
      anyway. Those that aren't are unlikely to be hurt by it.

   3) document what filesystems should do when there is a writeback
      error. Today, there is very little consistency between them, and a
      lot of cargo-cult copying. We need to make it very clear what
      filesystems should do in this situation.

  To achieve this, the set adds a new data type (errseq_t) and then
  builds new writeback error tracking infrastructure around that. Once
  all of that is in place, we change the filesystems to use the new
  infrastructure for reporting wb errors to userland.

  Note that this is just the initial foray into cleaning up this mess.
  There is a lot of work remaining here:

   1) convert the rest of the filesystems in a similar fashion. Once the
      initial set is in, then I think most other fs' will be fairly
      simple to convert. Hopefully most of those can in via individual
      filesystem trees.

   2) convert internal waiters on writeback to use errseq_t for
      detecting errors instead of relying on the AS_* flags. I have some
      draft patches for this for ext4, but they are not quite ready for
      prime time yet.

  This was a discussion topic this year at LSF/MM too. If you're
  interested in the gory details, LWN has some good articles about this:

      https://lwn.net/Articles/718734/
      https://lwn.net/Articles/724307/"

* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  btrfs: minimal conversion to errseq_t writeback error reporting on fsync
  xfs: minimal conversion to errseq_t writeback error reporting
  ext4: use errseq_t based error handling for reporting data writeback errors
  fs: convert __generic_file_fsync to use errseq_t based reporting
  block: convert to errseq_t based writeback error tracking
  dax: set errors in mapping when writeback fails
  Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
  mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
  fs: new infrastructure for writeback error handling and reporting
  lib: add errseq_t type and infrastructure for handling it
  mm: don't TestClearPageError in __filemap_fdatawait_range
  mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
  jbd2: don't clear and reset errors after waiting on writeback
  buffer: set errors in mapping at the time that the error occurs
  fs: check for writeback errors after syncing out buffers in generic_file_fsync
  buffer: use mapping_set_error instead of setting the flag
  mm: fix mapping_set_error call in me_pagecache_dirty
2017-07-07 19:38:17 -07:00
Linus Torvalds
dd6ec12f3b DeviceTree for 4.13:
- vsprintf format specifier %pOF for device_node's. This will enable us
   to stop storing the full node names. Conversion of users will happen
   next cycle.
 
 - Update documentation to point to DT specification instead of ePAPR.
 
 - Split out graph and property functions to a separate file.
 
 - New of-graph functions for ALSA
 
 - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
   Itead, and BananaPi.
 
 - Improve dtx_diff utility filename printing.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJZXpNsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcO2gg//
 VxhXDs6+oTkBCUzVtEHue/yv44q8Sa7M3jY3/VqVSLa3Eopp/4dmDgBAtWYYX2ou
 KfUl0+yD4cSKhw6oxycwsaS61zf8JkM4sbXYQTphty/5lwxq0/i3OGj98Uk9w9JH
 kM+b1Wi7Z6GBzqh1GuS4E+ADSktMadxd0LugXZvDEMVQZusv/nzWxzq/bdMUqW19
 0nvBL9ABRAPirhBuMSWpYlEEkwQn7JF3LO3i8IBDhhFzMsvbfR7cTp+ydt6I2pk8
 h8DxlsaPIOWH5KePNEmzsd1VlV/HcNl7/vZb0ev0Eb94TLHJRJ7V0ZMQxc5vxHgN
 x6aMlBLHGzG6LI5CV30pWAD/qrrtXNbqmlj1Qjd+FXen6NuQSngSfo5aXzXrM6X5
 ZUD7ou9KzYObraOarU6w2qSICok85bGQHOiBQDVTmE4E/4AVscnc1VQi/rTHrt2O
 Yt3AV8iwaum8q2PVOVKdy8tu7x/7BzBdSObYtjjMIuWcrInnlIyUkmehtCl38kqV
 fd6OIVEOhTJTr0CYDiXEbKtG81j7JhoREdVZvzcEhWFGt/98Rjc9tkTihhFzky4m
 D6lpzpf8mvemrBiMegyQbhVcfHyo0fJe+6giV7cssf2Xhe1QkC15UXywbccO7xFJ
 nf3yqCl8YVEPG0l1MrR+YEHHcnr4ZIEZpejOv+SzZeg=
 =DNwf
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - vsprintf format specifier %pOF for device_node's. This will enable us
   to stop storing the full node names. Conversion of users will happen
   next cycle.

 - Update documentation to point to DT specification instead of ePAPR.

 - Split out graph and property functions to a separate file.

 - New of-graph functions for ALSA

 - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull,
   Itead, and BananaPi.

 - Improve dtx_diff utility filename printing.

* tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits)
  of: document /sys/firmware/fdt
  dt-bindings: Add RISC-V vendor prefix
  vsprintf: Add %p extension "%pOF" for device tree
  of: find_node_by_full_name rewrite to compare each level
  of: use kbasename instead of open coding
  dt-bindings: thermal: add file extension to brcm,ns-thermal
  of: update ePAPR references to point to Devicetree Specification
  scripts/dtc: dtx_diff - Show real file names in diff header
  of: detect invalid phandle in overlay
  of: be consistent in form of file mode
  of: make __of_attach_node() static
  of: address.c header comment typo
  of: fdt.c header comment typo
  of: make of_fdt_is_compatible() static
  dt-bindings: display-timing.txt convert non-ascii characters to ascii
  Documentation: remove overlay-notes reference to non-existent file
  dt-bindings: usb: exynos-usb: Add missing required VDD properties
  dt-bindings: Add vendor prefix for Linksys
  MAINTAINERS: add device tree ABI documentation file
  of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd
  ...
2017-07-07 10:37:54 -07:00
Linus Torvalds
b6ffe9ba46 libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
   for persistent memory write operations on x86. The _flushcache()
   semantic indicates that the cache is either bypassed for the copy
   operation (movnt) or any lines dirtied by the copy operation are
   written back (clwb, clflushopt, or clflush).
 
 * Extend dax_operations with ->copy_from_iter() and ->flush()
   operations. These operations and other infrastructure updates allow
   all persistent memory specific dax functionality to be pushed into
   libnvdimm and the pmem driver directly. It also allows dax-specific
   sysfs attributes to be linked to a host device, for example:
       /sys/block/pmem0/dax/write_cache
 
 * Add support for the new NVDIMM platform/firmware mechanisms introduced
   in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
   label format, extensions to the address-range-scrub command set, new
   error injection commands, and a new BTT (block-translation-table)
   layout. These updates support inter-OS and pre-OS compatibility.
 
 * Fix a longstanding memory corruption bug in nfit_test.
 
 * Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
   capable.
 
 * Miscellaneous fixes and small updates across libnvdimm and the nfit
   driver.
 
 Acknowledgements that came after the branch was pushed:
 
 commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
   sysfs_get_dirent() reference lifetime"
 Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXsUtAAoJEB7SkWpmfYgCOXcP/06bncqTEvtgrOF2b7O8w+8e
 mTySD51RUn6UpkFd37SMRch+rmbojuqj465TAE7XIXgyLgIOJixKaTlHYUoEnP3X
 rC4Q/g5mN0nittMDwL+vQaa1lQWd2kbjOlrqCgnLHVEEJpHmiQussunjvir4G1U7
 5ROooP8W+qMK5y5XPLJAg/gyGhYkjpRSlDg3Eo5meZZ0IdURbI7+WCLKrPcQUERT
 WmDc9gLhJdSQVxBV/0m2gdAER4ADmFjcrlm8kjXRBhdlUmEFjM0zpvlHJutHTkks
 rNZWCmCJs0Sas+DmRKszFmvVFHRHqUVA3dWK4P6PJEX+tl7BwlPcxpbfacHTG2EZ
 btArFc584DZ+EIrim1cXXRvLFlxnKOFBtBeteFs7l2kZjEcN6S4I5OZgTyeDpe/i
 2WDpHWLQWibkcIzH9y1EuMBkYnQjTJl1pecHzJoTaC+jAQ+opLiY7EecjLmCmQS6
 MBYUeQZNufLGfT5b8KXfpKeiXhpFkYrAGp+ErfoH/6RKy2zqTdagN1yVhos2y+a7
 JJu/Weetpn8qv+KTGUShO8TGyWv3wU46YkG2rKWl0FL1+C+6LMMw1/L0A97lwVlg
 BpypVVyaNu1D22ifZ8O5wbqPIYghoZ5akA0CiduhX19cpl5rTeTd8EvLjvcYhZEZ
 pMHuMAqIcIyLhIe2/sRF
 =xKQB
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "libnvdimm updates for the latest ACPI and UEFI specifications. This
  pull request also includes new 'struct dax_operations' enabling to
  undo the abuse of copy_user_nocache() for copy operations to pmem.

  The dax work originally missed 4.12 to address concerns raised by Al.

  Summary:

   - Introduce the _flushcache() family of memory copy helpers and use
     them for persistent memory write operations on x86. The
     _flushcache() semantic indicates that the cache is either bypassed
     for the copy operation (movnt) or any lines dirtied by the copy
     operation are written back (clwb, clflushopt, or clflush).

   - Extend dax_operations with ->copy_from_iter() and ->flush()
     operations. These operations and other infrastructure updates allow
     all persistent memory specific dax functionality to be pushed into
     libnvdimm and the pmem driver directly. It also allows dax-specific
     sysfs attributes to be linked to a host device, for example:
     /sys/block/pmem0/dax/write_cache

   - Add support for the new NVDIMM platform/firmware mechanisms
     introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
     namespace label format, extensions to the address-range-scrub
     command set, new error injection commands, and a new BTT
     (block-translation-table) layout. These updates support inter-OS
     and pre-OS compatibility.

   - Fix a longstanding memory corruption bug in nfit_test.

   - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
     capable.

   - Miscellaneous fixes and small updates across libnvdimm and the nfit
     driver.

  Acknowledgements that came after the branch was pushed: commit
  6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
  sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
  <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
  libnvdimm, namespace: record 'lbasize' for pmem namespaces
  acpi/nfit: Issue Start ARS to retrieve existing records
  libnvdimm: New ACPI 6.2 DSM functions
  acpi, nfit: Show bus_dsm_mask in sysfs
  libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
  acpi, nfit: Enable DSM pass thru for root functions.
  libnvdimm: passthru functions clear to send
  libnvdimm, btt: convert some info messages to warn/err
  libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
  libnvdimm: fix the clear-error check in nsio_rw_bytes
  libnvdimm, btt: fix btt_rw_page not returning errors
  acpi, nfit: quiet invalid block-aperture-region warnings
  libnvdimm, btt: BTT updates for UEFI 2.7 format
  acpi, nfit: constify *_attribute_group
  libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
  libnvdimm, pmem, dax: export a cache control attribute
  dax: convert to bitmask for flags
  dax: remove default copy_from_iter fallback
  libnvdimm, nfit: enable support for volatile ranges
  libnvdimm, pmem: fix persistence warning
  ...
2017-07-07 09:44:06 -07:00
Al Viro
09fc68dc66 iov_iter: saner checks on copyin/copyout
* might_fault() is better checked in caller (and e.g. fault-in + kmap_atomic
codepath also needs might_fault() coverage)
* we have already done object size checks
* we have *NOT* done access_ok() recently enough; we rely upon the
iovec array having passed sanity checks back when it had been created
and not nothing having buggered it since.  However, that's very much
non-local, so we'd better recheck that.

So the thing we want does not match anything in uaccess - we need
access_ok + kasan checks + raw copy without any zeroing.  Just define
such helpers and use them here.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-07 05:18:09 -04:00
Linus Torvalds
dc502142b6 Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull user access str* updates from Al Viro:
 "uaccess str...() dead code removal"

* 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  s390 keyboard.c: don't open-code strndup_user()
  mips: get rid of unused __strnlen_user()
  get rid of unused __strncpy_from_user() instances
  kill strlen_user()
2017-07-06 22:07:44 -07:00
Linus Torvalds
f72e24a124 This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
 code related to dma-mapping, and will further consolidate arch code
 into common helpers.
 
 This pull request contains:
 
  - removal of the DMA_ERROR_CODE macro, replacing it with calls
    to ->mapping_error so that the dma_map_ops instances are
    more self contained and can be shared across architectures (me)
  - removal of the ->set_dma_mask method, which duplicates the
    ->dma_capable one in terms of functionality, but requires more
    duplicate code.
  - various updates for the coherent dma pool and related arm code
    (Vladimir)
  - various smaller cleanups (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlldmw0LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOiKA/+Ln1mFLSf3nfTzIHa24Bbk8ZTGr0B8TD4Vmyyt8iG
 oO3AeaTLn3d6ugbH/uih/tPz8PuyXsdiTC1rI/ejDMiwMTSjW6phSiIHGcStSR9X
 VFNhmMFacp7QpUpvxceV0XZYKDViAoQgHeGdp3l+K5h/v4AYePV/v/5RjQPaEyOh
 YLbCzETO+24mRWdJxdAqtTW4ovYhzj6XsiJ+pAjlV0+SWU6m5L5E+VAPNi1vqv1H
 1O2KeCFvVYEpcnfL3qnkw2timcjmfCfeFAd9mCUAc8mSRBfs3QgDTKw3XdHdtRml
 LU2WuA5cpMrOdBO4mVra2plo8E2szvpB1OZZXoKKdCpK3VGwVpVHcTvClK2Ks/3B
 GDLieroEQNu2ZIUIdWXf/g2x6le3BcC9MmpkAhnGPqCZ7skaIBO5Cjpxm0zTJAPl
 PPY3CMBBEktAvys6DcudOYGixNjKUuAm5lnfpcfTEklFdG0AjhdK/jZOplAFA6w4
 LCiy0rGHM8ZbVAaFxbYoFCqgcjnv6EjSiqkJxVI4fu/Q7v9YXfdPnEmE0PJwCVo5
 +i7aCLgrYshTdHr/F3e5EuofHN3TDHwXNJKGh/x97t+6tt326QMvDKX059Kxst7R
 rFukGbrYvG8Y7yXwrSDbusl443ta0Ht7T1oL4YUoJTZp0nScAyEluDTmrH1JVCsT
 R4o=
 =0Fso
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping infrastructure from Christoph Hellwig:
 "This is the first pull request for the new dma-mapping subsystem

  In this new subsystem we'll try to properly maintain all the generic
  code related to dma-mapping, and will further consolidate arch code
  into common helpers.

  This pull request contains:

   - removal of the DMA_ERROR_CODE macro, replacing it with calls to
     ->mapping_error so that the dma_map_ops instances are more self
     contained and can be shared across architectures (me)

   - removal of the ->set_dma_mask method, which duplicates the
     ->dma_capable one in terms of functionality, but requires more
     duplicate code.

   - various updates for the coherent dma pool and related arm code
     (Vladimir)

   - various smaller cleanups (me)"

* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
  ARM: dma-mapping: Remove traces of NOMMU code
  ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
  ARM: NOMMU: Introduce dma operations for noMMU
  drivers: dma-mapping: allow dma_common_mmap() for NOMMU
  drivers: dma-coherent: Introduce default DMA pool
  drivers: dma-coherent: Account dma_pfn_offset when used with device tree
  dma: Take into account dma_pfn_offset
  dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
  dma-mapping: remove dmam_free_noncoherent
  crypto: qat - avoid an uninitialized variable warning
  au1100fb: remove a bogus dma_free_nonconsistent call
  MAINTAINERS: add entry for dma mapping helpers
  powerpc: merge __dma_set_mask into dma_set_mask
  dma-mapping: remove the set_dma_mask method
  powerpc/cell: use the dma_supported method for ops switching
  powerpc/cell: clean up fixed mapping dma_ops initialization
  tile: remove dma_supported and mapping_error methods
  xen-swiotlb: remove xen_swiotlb_set_dma_mask
  arm: implement ->dma_supported instead of ->set_dma_mask
  mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
  ...
2017-07-06 19:20:54 -07:00
Linus Torvalds
a4c20b9a57 Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "These are the percpu changes for the v4.13-rc1 merge window. There are
  a couple visibility related changes - tracepoints and allocator stats
  through debugfs, along with __ro_after_init markings and a cosmetic
  rename in percpu_counter.

  Please note that the simple O(#elements_in_the_chunk) area allocator
  used by percpu allocator is again showing scalability issues,
  primarily with bpf allocating and freeing large number of counters.
  Dennis is working on the replacement allocator and the percpu
  allocator will be seeing increased churns in the coming cycles"

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix static checker warnings in pcpu_destroy_chunk
  percpu: fix early calls for spinlock in pcpu_stats
  percpu: resolve err may not be initialized in pcpu_alloc
  percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
  percpu: add tracepoint support for percpu memory
  percpu: expose statistics about percpu memory via debugfs
  percpu: migrate percpu data structures to internal header
  percpu: add missing lockdep_assert_held to func pcpu_free_area
  mark most percpu globals as __ro_after_init
2017-07-06 08:59:41 -07:00
Jeff Layton
84cbadadc6 lib: add errseq_t type and infrastructure for handling it
An errseq_t is a way of recording errors in one place, and allowing any
number of "subscribers" to tell whether an error has been set again
since a previous time.

It's implemented as an unsigned 32-bit value that is managed with atomic
operations. The low order bits are designated to hold an error code
(max size of MAX_ERRNO). The upper bits are used as a counter.

The API works with consumers sampling an errseq_t value at a particular
point in time. Later, that value can be used to tell whether new errors
have been set since that time.

Note that there is a 1 in 512k risk of collisions here if new errors
are being recorded frequently, since we have so few bits to use as a
counter. To mitigate this, one bit is used as a flag to tell whether the
value has been sampled since a new value was recorded. That allows
us to avoid bumping the counter if no one has sampled it since it
was last bumped.

Later patches will build on this infrastructure to change how writeback
errors are tracked in the kernel.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 07:02:24 -04:00
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
Linus Torvalds
eed1fc8779 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:

 - Store printk() messages into the main log buffer directly even in NMI
   when the lock is available. It is the best effort to print even large
   chunk of text. It is handy, for example, when all ftrace messages are
   printed during the system panic in NMI.

 - Add missing annotations to calm down compiler warnings

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  printk: add __printf attributes to internal functions
  printk: Use the main logbuf in NMI when logbuf_lock is available
2017-07-05 11:11:26 -07:00
Linus Torvalds
650fc870a2 There has been a fair amount of activity in the docs tree this time
around.  Highlights include:
 
  - Conversion of a bunch of security documentation into RST
 
  - The conversion of the remaining DocBook templates by The Amazing
    Mauro Machine.  We can now drop the entire DocBook build chain.
 
  - The usual collection of fixes and minor updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZWkGAAAoJEI3ONVYwIuV6rf0P/0B3JTiVPKS/WUx53+jzbAi4
 1BN7dmmuMxE1bWpgdEq+ac4aKxm07iAojuntuMj0qz/ZB1WARcmvEqqzI5i4wfq9
 5MrLduLkyuWfr4MOPseKJ2VK83p8nkMOiO7jmnBsilu7fE4nF+5YY9j4cVaArfMy
 cCQvAGjQzvej2eiWMGUSLHn4QFKh00aD7cwKyBVsJ08b27C9xL0J2LQyCDZ4yDgf
 37/MH3puEd3HX/4qAwLonIxT3xrIrrbDturqLU7OSKcWTtGZNrYyTFbwR3RQtqWd
 H8YZVg2Uyhzg9MYhkbQ2E5dEjUP4mkegcp6/JTINH++OOPpTbdTJgirTx7VTkSf1
 +kL8t7+Ayxd0FH3+77GJ5RMj8LUK6rj5cZfU5nClFQKWXP9UL3IelQ3Nl+SpdM8v
 ZAbR2KjKgH9KS6+cbIhgFYlvY+JgPkOVruwbIAc7wXVM3ibk1sWoBOFEujcbueWh
 yDpQv3l1UX0CKr3jnevJoW26LtEbGFtC7gSKZ+3btyeSBpWFGlii42KNycEGwUW0
 ezlwryDVHzyTUiKllNmkdK4v73mvPsZHEjgmme4afKAIiUilmcUF4XcqD86hISFT
 t+UJLA/zEU+0sJe26o2nK6GNJzmo4oCtVyxfhRe26Ojs1n80xlYgnZRfuIYdd31Z
 nwLBnwDCHAOyX91WXp9G
 =cVjZ
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.13' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "There has been a fair amount of activity in the docs tree this time
  around. Highlights include:

   - Conversion of a bunch of security documentation into RST

   - The conversion of the remaining DocBook templates by The Amazing
     Mauro Machine. We can now drop the entire DocBook build chain.

   - The usual collection of fixes and minor updates"

* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
  scripts/kernel-doc: handle DECLARE_HASHTABLE
  Documentation: atomic_ops.txt is core-api/atomic_ops.rst
  Docs: clean up some DocBook loose ends
  Make the main documentation title less Geocities
  Docs: Use kernel-figure in vidioc-g-selection.rst
  Docs: fix table problems in ras.rst
  Docs: Fix breakage with Sphinx 1.5 and upper
  Docs: Include the Latex "ifthen" package
  doc/kokr/howto: Only send regression fixes after -rc1
  docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
  doc: Document suitability of IBM Verse for kernel development
  Doc: fix a markup error in coding-style.rst
  docs: driver-api: i2c: remove some outdated information
  Documentation: DMA API: fix a typo in a function name
  Docs: Insert missing space to separate link from text
  doc/ko_KR/memory-barriers: Update control-dependencies example
  Documentation, kbuild: fix typo "minimun" -> "minimum"
  docs: Fix some formatting issues in request-key.rst
  doc: ReSTify keys-trusted-encrypted.txt
  doc: ReSTify keys-request-key.txt
  ...
2017-07-03 21:13:25 -07:00
Linus Torvalds
f4dd029ee0 Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1.
 
 Lots of stuff in here, a large thunderbolt update, w1 driver header
 reorg, the new mux driver subsystem, google firmware driver updates, and
 a raft of other smaller things.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with the only reported
 issue being a merge problem with this tree and the jc-docs tree in the
 w1 documentation area.  The fix should be obvious for what to do when it
 happens, if not, we can send a follow-up patch for it afterward.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO
 EMi60UXWqAFJbtVMS9Aj
 =yrSq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...
2017-07-03 20:55:59 -07:00
Linus Torvalds
974668417b driver core patches for 4.13-rc1
Here is the big driver core update for 4.13-rc1.
 
 The large majority of this is a lot of cleanup of old fields in the
 driver core structures and their remaining usages in random drivers.
 All of those fixes have been reviewed by the various subsystem
 maintainers.  There's also some small firmware updates in here, a new
 kobject uevent api interface that makes userspace interaction easier,
 and a few other minor things.
 
 All of these have been in linux-next for a long while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p
 kEeISGpHPYP9f8PBh9FO
 =Hfqt
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core update for 4.13-rc1.

  The large majority of this is a lot of cleanup of old fields in the
  driver core structures and their remaining usages in random drivers.
  All of those fixes have been reviewed by the various subsystem
  maintainers. There's also some small firmware updates in here, a new
  kobject uevent api interface that makes userspace interaction easier,
  and a few other minor things.

  All of these have been in linux-next for a long while with no reported
  issues"

* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
  arm: mach-rpc: ecard: fix build error
  zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
  driver-core: remove struct bus_type.dev_attrs
  powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
  powerpc: vio: use dev_groups and not dev_attrs for bus_type
  USB: usbip: convert to use DRIVER_ATTR_RW
  s390: drivers: convert to use DRIVER_ATTR_RO/WO
  platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
  pcmcia: ds: convert to use DRIVER_ATTR_RO
  wireless: ipw2x00: convert to use DRIVER_ATTR_RW
  net: ehea: convert to use DRIVER_ATTR_RO
  net: caif: convert to use DRIVER_ATTR_RO
  TTY: hvc: convert to use DRIVER_ATTR_RW
  PCI: pci-driver: convert to use DRIVER_ATTR_WO
  IB: nes: convert to use DRIVER_ATTR_RW
  HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
  arm: ecard: fix dev_groups patch typo
  tty: serdev: use dev_groups and not dev_attrs for bus_type
  sparc: vio: use dev_groups and not dev_attrs for bus_type
  hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
  ...
2017-07-03 20:27:48 -07:00
Dan Williams
9d92573fff Merge branch 'for-4.13/dax' into libnvdimm-for-next 2017-07-03 16:54:58 -07:00