Commit Graph

45 Commits

Author SHA1 Message Date
Kirill A. Shutemov
09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Mel Gorman
2457aec637 mm: non-atomically mark page accessed during page cache allocation where possible
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:10 -07:00
Cong Wang
a3ac1414eb ntfs: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:25 +08:00
Anton Altaparmakov
45d95bcd7a NTFS: Do not dereference pointer before checking for NULL.
Found by Coverity software (http://scan.coverity.com).

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>
2012-02-22 11:15:43 +00:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Anton Altaparmakov
ebab89909e NTFS: Fix read regression.
The regression was caused by:
        commit[a32ea1e1f9] Fix read/truncate race

This causes ntfs_readpage() to be called for a zero i_size inode, which
failed when the file was compressed and non-resident.

Thanks a lot to Mike Galbraith for reporting the issue and tracking down
the commit that caused the regression.

Looking into it I found three bugs which the patch fixes.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Tested-by:  Mike Galbraith <efault@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-03 12:27:21 -07:00
Anton Altaparmakov
bfab36e816 NTFS: Fix a mount time deadlock.
Big thanks go to Mathias Kolehmainen for reporting the bug, providing
debug output and testing the patches I sent him to get it working.

The fix was to stop calling ntfs_attr_set() at mount time as that causes
balance_dirty_pages_ratelimited() to be called which on systems with
little memory actually tries to go and balance the dirty pages which tries
to take the s_umount semaphore but because we are still in fill_super()
across which the VFS holds s_umount for writing this results in a
deadlock.

We now do the dirty work by hand by submitting individual buffers.  This
has the annoying "feature" that mounting can take a few seconds if the
journal is large as we have clear it all.  One day someone should improve
on this by deferring the journal clearing to a helper kernel thread so it
can be done in the background but I don't have time for this at the moment
and the current solution works fine so I am leaving it like this for now.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 09:16:30 -07:00
Nick Piggin
6fe6900e1e mm: make read_cache_page synchronous
Ensure pages are uptodate after returning from read_cache_page, which allows
us to cut out most of the filesystem-internal PageUptodate calls.

I didn't have a great look down the call chains, but this appears to fixes 7
possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in
ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in
block2mtd.  All depending on whether the filler is async and/or can return
with a !uptodate page.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:51 -07:00
Robert P. J. Day
5c3bd438cc [PATCH] NTFS: rename incorrect check of NTFS_DEBUG with just DEBUG
Replace the incorrect debugging check of "#ifdef NTFS_DEBUG" with
just "#ifdef DEBUG".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:27 -08:00
Christoph Lameter
e6b4f8da3a [PATCH] slab: remove SLAB_NOFS
SLAB_NOFS is an alias of GFP_NOFS.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:23 -08:00
Richard Knutsson
c49c311150 [PATCH] fs/ntfs: Conversion to generic boolean
Conversion of booleans to: generic-boolean.patch (2006-08-23)

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:19 -07:00
Pekka Enberg
090d2b185d [PATCH] read_mapping_page for address space
Add read_mapping_page() which is used for callers that pass
mapping->a_ops->readpage as the filler for read_cache_page.  This removes
some duplication from filesystem code.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:02 -07:00
Anton Altaparmakov
f95c4018fd NTFS: Remove all the make_bad_inode() calls. This should only be called
from read inode and new inode code paths.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2006-03-23 15:59:32 +00:00
Anton Altaparmakov
a0646a1f04 NTFS: Add support for sparse files which have a compression unit of 0.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2006-03-23 15:53:03 +00:00
Anton Altaparmakov
3ccc7384db NTFS: Fix a buggette in an "should be impossible" case handling where we
continued the attribute lookup loop instead of aborting it.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2006-03-23 15:03:11 +00:00
Jes Sorensen
1b1dcc1b57 [PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_sem
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.

Modified-by: Ingo Molnar <mingo@elte.hu>

(finished the conversion)

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:24 -08:00
Anton Altaparmakov
dda65b941f NTFS: Fix compilation warnings with gcc-4.0.2 on SUSE 10.0.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-24 08:57:59 +01:00
Anton Altaparmakov
7d0ffdb279 NTFS: $EA attributes can be both resident non-resident.
Minor tidying.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-19 12:21:19 +01:00
Anton Altaparmakov
29b8990513 NTFS: In attrib.c::ntfs_attr_set() call balance_dirty_pages_ratelimited()
and cond_resched() in the main loop as we could be dirtying a lot of
      pages and this ensures we play nice with the VM and the system as a
      whole.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-11 14:54:42 +01:00
Anton Altaparmakov
2d86829b84 NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_extend_allocation(), a function to
extend the allocation of an attributes.  Optionally, the data size,
      but not the initialized size can be extended, too.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 15:18:56 +01:00
Anton Altaparmakov
2a6fc4e1b0 NTFS: Fix ntfs_attr_make_non_resident() to update the vfs inode i_blocks
which is zero for a resident attribute but should no longer be zero
      once the attribute is non-resident as it then has real clusters
      allocated.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 14:57:15 +01:00
Anton Altaparmakov
8925d4f0d3 NTFS: Change ntfs_attr_make_non_resident to take the attribute value size
as an extra parameter.  This is needed since we need to know the size
      before we can map the mft record and our callers always know it.  The
      reason we cannot simply read the size from the vfs inode i_size is
      that this is not necessarily uptodate.  This happens when
      ntfs_attr_make_non_resident() is called in the ->truncate call path.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 14:48:20 +01:00
Anton Altaparmakov
fc0fa7dc7d NTFS: - Change ntfs_cluster_alloc() to take an extra boolean parameter
specifying whether the cluster are being allocated to extend an
        attribute or to fill a hole.
      - Change ntfs_attr_make_non_resident() to call ntfs_cluster_alloc()
        with @is_extension set to TRUE and remove the runlist terminator
        fixup code as this is now done by ntfs_cluster_alloc().

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 14:36:56 +01:00
Anton Altaparmakov
69b41e3c02 NTFS: Change ntfs_attr_find_vcn_nolock() to also take an optional attribute
search context as argument.  This allows calling it with the mft
      record mapped.  Update all callers.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 14:01:14 +01:00
Anton Altaparmakov
fd9d63678d NTFS: Change ntfs_map_runlist_nolock() to also take an optional attribute
search context.  This allows calling it with the mft record mapped.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-10-04 13:44:48 +01:00
Anton Altaparmakov
807c453de7 NTFS: Fix handling of sparse attributes in ntfs_attr_make_non_resident().
Also, add BUG() checks to ntfs_attr_make_non_resident() and
      ntfs_attr_set() to ensure that these functions are never called
      for compressed or encrypted attributes.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-08 21:01:17 +01:00
Anton Altaparmakov
2983d1bd1a NTFS: Fix several bugs in fs/ntfs/attrib.c.
- Fix a bug in ntfs_map_runlist_nolock() where we forgot to protect
  access to the allocated size in the ntfs inode with the size lock.
- Fix ntfs_attr_vcn_to_lcn_nolock() and ntfs_attr_find_vcn_nolock() to
  return LCN_ENOENT when there is no runlist and the allocated size is
  zero.
- Fix load_attribute_list() to handle the case of a NULL runlist.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-08 20:56:09 +01:00
Anton Altaparmakov
0aacceacf3 NTFS: Add fs/ntfs/attrib.[hc]::ntfs_resident_attr_value_resize().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-09-08 20:40:32 +01:00
Anton Altaparmakov
af859a42d7 NTFS: Prepare for 2.1.23 release: Update documentation and bump version.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-06-25 21:07:27 +01:00
Anton Altaparmakov
4757d7dff6 NTFS: Change ntfs_map_runlist_nolock() to only decompress the mapping pairs
if the requested vcn is inside it.  Otherwise we get into problems
      when we try to map an out of bounds vcn because we then try to map
      the already mapped runlist fragment which causes
      ntfs_mapping_pairs_decompress() to fail and return error.  Update
      ntfs_attr_find_vcn_nolock() accordingly.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-06-25 17:24:08 +01:00
Anton Altaparmakov
fa3be92317 NTFS: Add an extra parameter @last_vcn to ntfs_get_size_for_mapping_pairs()
and ntfs_mapping_pairs_build() to allow the runlist encoding to be
      partial which is desirable when filling holes in sparse attributes.
      Update all callers.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-06-25 17:15:36 +01:00
Anton Altaparmakov
1d58b27b8d NTFS: Change the runlist terminator of the newly allocated cluster(s) to
LCN_ENOENT in ntfs_attr_make_non_resident().  Otherwise the runlist
      code gets confused.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-06-25 17:04:55 +01:00
Anton Altaparmakov
442d207eb0 NTFS: Use C99 style structure initialization after memory allocation where
possible (fs/ntfs/{attrib.c,index.c,super.c}).  Thanks to Al Viro and
      Pekka Enberg.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-27 16:42:56 +01:00
Anton Altaparmakov
bb3cf33509 NTFS: Update attribute definition handling.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:46:17 +01:00
Anton Altaparmakov
53d59aad93 NTFS: Fix compilation when configured read-only.
- Add ifdef NTFS_RW around write specific code if fs/ntfs/runlist.[hc] and
  fs/ntfs/attrib.[hc].
- Minor bugfix to fs/ntfs/attrib.c::ntfs_attr_make_non_resident() where the
  runlist was not freed in all error cases.
- Add fs/ntfs/runlist.[hc]::ntfs_rl_find_vcn_nolock().

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:39:30 +01:00
Anton Altaparmakov
1ef334d372 NTFS: Include linux/swap.h in fs/ntfs/attrib.c for mark_page_accessed().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:27:45 +01:00
Anton Altaparmakov
905685f68f NTFS: - Modify ->readpage and ->writepage (fs/ntfs/aops.c) so they detect
and handle the case where an attribute is converted from resident
        to non-resident by a concurrent file write.
      - Reorder some operations when converting an attribute from resident
        to non-resident (fs/ntfs/attrib.c) so it is safe wrt concurrent
        ->readpage and ->writepage.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:26:01 +01:00
Anton Altaparmakov
2bfb4fff3e NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_make_non_resident().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:22:07 +01:00
Anton Altaparmakov
c0c1cc0e46 NTFS: - Fix bug in fs/ntfs/attrib.c::ntfs_find_vcn_nolock() where after
dropping the read lock and taking the write lock we were not checking
        whether someone else did not already do the work we wanted to do.
      - Rename ntfs_find_vcn_nolock() to ntfs_attr_find_vcn_nolock().
      - Tidy up some comments in fs/ntfs/runlist.c.
      - Add LCN_ENOMEM and LCN_EIO definitions to fs/ntfs/runlist.h.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:20:49 +01:00
Anton Altaparmakov
271849a988 NTFS: Add fs/ntfs/attrib.[hc]::ntfs_attr_vcn_to_lcn_nolock() used by the new
write code.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:18:43 +01:00
Anton Altaparmakov
7e693073a9 NTFS: Add AT_EA in addition to AT_DATA to whitelist for being allowed to be
non-resident in fs/ntfs/attrib.c::ntfs_attr_can_be_non_resident().

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 11:17:08 +01:00
Anton Altaparmakov
b6ad6c52fe NTFS: - Split ntfs_map_runlist() into ntfs_map_runlist() and a non-locking
helper ntfs_map_runlist_nolock() which is used by ntfs_map_runlist().
	This allows us to map runlist fragments with the runlist lock already
	held without having to drop and reacquire it around the call.  Adapt
	all callers.
      - Change ntfs_find_vcn() to ntfs_find_vcn_nolock() which takes a locked
	runlist.  This allows us to find runlist elements with the runlist
	lock already held without having to drop and reacquire it around the
	call.  Adapt all callers.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-05 10:56:31 +01:00
Anton Altaparmakov
da28438cae NTFS: Use i_size_read() in fs/ntfs/attrib.c::ntfs_attr_set().
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-05-04 14:24:16 +01:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00