Commit Graph

279 Commits

Author SHA1 Message Date
Dennis Zhou
6b4505352e blkcg: remove unused __blkg_release_rcu()
An earlier commit 7fcf2b033b ("blkcg: change blkg reference counting
to use percpu_ref") moved around the release call from blkg_put() to be
a part of the percpu_ref cleanup. Remove the additional unused code
which should have been removed earlier.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-21 08:47:58 -07:00
Ming Lei
3a762de55b block: save irq state in blkg_lookup_create()
blkg_lookup_create() may be called from pool_map() in which
irq state is saved, so we have to do that in blkg_lookup_create().

Otherwise, the following lockdep warning can be triggered:

[  104.258537] ================================
[  104.259129] WARNING: inconsistent lock state
[  104.259725] 4.20.0-rc6+ #545 Not tainted
[  104.260268] --------------------------------
[  104.260865] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  104.261727] swapper/49/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
[  104.262444] 00000000db365b5d (&(&pool->lock)->rlock#3){+.?.}, at: thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.263747] {SOFTIRQ-ON-W} state was registered at:
[  104.264417]   _raw_spin_unlock_irq+0x29/0x4c
[  104.265014]   blkg_lookup_create+0xdc/0xe6
[  104.265609]   bio_associate_blkg_from_css+0xd3/0x13f
[  104.266312]   bio_associate_blkg+0x15a/0x1bb
[  104.266913]   pool_map+0xe8/0x103 [dm_thin_pool]
[  104.267572]   __map_bio+0x98/0x29c [dm_mod]
[  104.268162]   __split_and_process_non_flush+0x29e/0x306 [dm_mod]
[  104.269003]   __split_and_process_bio+0x16a/0x25b [dm_mod]
[  104.269971]   __dm_make_request.isra.14+0xdc/0x124 [dm_mod]
[  104.270973]   generic_make_request+0x3f5/0x68b
[  104.271676]   process_prepared_mapping+0x166/0x1ef [dm_thin_pool]
[  104.272531]   schedule_zero+0x239/0x273 [dm_thin_pool]
[  104.273245]   process_cell+0x60c/0x6f1 [dm_thin_pool]
[  104.273967]   do_worker+0x60c/0xca8 [dm_thin_pool]
[  104.274635]   process_one_work+0x4eb/0x834
[  104.275203]   worker_thread+0x318/0x484
[  104.275740]   kthread+0x1d1/0x1e1
[  104.276203]   ret_from_fork+0x3a/0x50
[  104.276714] irq event stamp: 170003
[  104.277201] hardirqs last  enabled at (170002): [<ffffffff81bcc33e>] _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.278535] hardirqs last disabled at (170003): [<ffffffff81bcc1ad>] _raw_spin_lock_irqsave+0x20/0x55
[  104.280273] softirqs last  enabled at (169978): [<ffffffff810d13d4>] irq_enter+0x4c/0x73
[  104.281617] softirqs last disabled at (169979): [<ffffffff810d1479>] irq_exit+0x7e/0x11d
[  104.282744]
[  104.282744] other info that might help us debug this:
[  104.283640]  Possible unsafe locking scenario:
[  104.283640]
[  104.284452]        CPU0
[  104.284803]        ----
[  104.285150]   lock(&(&pool->lock)->rlock#3);
[  104.285762]   <Interrupt>
[  104.286130]     lock(&(&pool->lock)->rlock#3);
[  104.286750]
[  104.286750]  *** DEADLOCK ***
[  104.286750]
[  104.287564] no locks held by swapper/49/0.
[  104.288129]
[  104.288129] stack backtrace:
[  104.288738] CPU: 49 PID: 0 Comm: swapper/49 Not tainted 4.20.0-rc6+ #545
[  104.289700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[  104.290858] Call Trace:
[  104.291204]  <IRQ>
[  104.291502]  dump_stack+0x9a/0xe6
[  104.291968]  mark_lock+0x56c/0x7a6
[  104.292442]  ? check_usage_backwards+0x209/0x209
[  104.293086]  __lock_acquire+0x400/0x15bf
[  104.293662]  ? check_chain_key+0x150/0x1aa
[  104.294236]  lock_acquire+0x1a6/0x1e3
[  104.294768]  ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.295444]  ? _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.296143]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.297031]  _raw_spin_lock_irqsave+0x46/0x55
[  104.297659]  ? thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.298335]  thin_endio+0xcf/0x2a3 [dm_thin_pool]
[  104.298997]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.299886]  ? check_flags+0x20a/0x20a
[  104.300408]  ? lock_acquire+0x1a6/0x1e3
[  104.300954]  ? process_prepared_discard_fail+0x36/0x36 [dm_thin_pool]
[  104.301865]  clone_endio+0x1bb/0x22d [dm_mod]
[  104.302491]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.303200]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.303836]  ? bio_endio+0x2b2/0x2da
[  104.304349]  clone_endio+0x1f3/0x22d [dm_mod]
[  104.304978]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.305709]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.306333]  ? bio_endio+0x2b2/0x2da
[  104.306853]  clone_endio+0x1f3/0x22d [dm_mod]
[  104.307476]  ? disable_write_zeroes+0x20/0x20 [dm_mod]
[  104.308185]  ? bio_disassociate_blkg+0xc6/0x15f
[  104.308817]  ? bio_endio+0x2b2/0x2da
[  104.309319]  blk_update_request+0x2de/0x4cc
[  104.309927]  blk_mq_end_request+0x2a/0x183
[  104.310498]  blk_done_softirq+0x16a/0x1a6
[  104.311051]  ? blk_softirq_cpu_dead+0xe2/0xe2
[  104.311653]  ? __lock_is_held+0x2a/0x87
[  104.312186]  __do_softirq+0x250/0x4e8
[  104.312705]  irq_exit+0x7e/0x11d
[  104.313157]  call_function_single_interrupt+0xf/0x20
[  104.313860]  </IRQ>
[  104.314163] RIP: 0010:native_safe_halt+0x2/0x3
[  104.314792] Code: 63 02 df f0 83 44 24 fc 00 48 89 df e8 cc 3f 7a ff 48 8b 03 a8 08 74 0b 65 81 25 9d 31 45 7e ff ff ff 7f 5b 5d 41 5c c3 fb f4 <c3> f4 c3 0f 1f 44 00 00 41 56 41 55 41 54 55 53 e8 a2 0d 5c ff e8
[  104.317339] RSP: 0018:ffff888106c9fdc0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
[  104.318390] RAX: 1ffff11020d92100 RBX: 0000000000000000 RCX: ffffffff81159ac7
[  104.319366] RDX: 1ffffffff05d5e69 RSI: 0000000000000007 RDI: ffff888106c90d1c
[  104.320339] RBP: 0000000000000000 R08: dffffc0000000000 R09: 0000000000000001
[  104.321313] R10: ffffed1025d57ba0 R11: ffffed1025d57b9f R12: 1ffff11020d93fbf
[  104.322328] R13: 0000000000000031 R14: ffff888106c90040 R15: 0000000000000000
[  104.323307]  ? lockdep_hardirqs_on+0x26b/0x278
[  104.323927]  default_idle+0xd9/0x1a8
[  104.324427]  do_idle+0x162/0x2b2
[  104.324891]  ? arch_cpu_idle_exit+0x28/0x28
[  104.325467]  ? mark_held_locks+0x28/0x7f
[  104.326031]  ? _raw_spin_unlock_irqrestore+0x44/0x6b
[  104.326719]  cpu_startup_entry+0x1d/0x1f
[  104.327261]  start_secondary+0x2cb/0x308
[  104.327806]  ? set_cpu_sibling_map+0x8a3/0x8a3
[  104.328421]  secondary_startup_64+0xa4/0xb0

Fixes: b978962ad4 ("blkcg: update blkg_lookup_create() to do locking")
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-19 09:35:45 -07:00
Dennis Zhou
0273ac349f blkcg: handle dying request_queue when associating a blkg
Between v3 [1] and v4 [2] of the blkg association series, the
association point moved from generic_make_request_checks(), which is
called after the request enters the queue, to bio_set_dev(), which is when
the bio is formed before submit_bio(). When the request_queue goes away,
the blkgs supporting the request_queue are destroyed and then the
q->root_blkg is set to %NULL.

This patch adds a %NULL check to blkg_tryget_closest() to prevent the
NPE caused by the above. It also adds a guard to see if the
request_queue is dying when creating a blkg to prevent creating a blkg
for a dead request_queue.

[1] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[2] https://lore.kernel.org/lkml/20181126211946.77067-1-dennis@kernel.org/

Fixes: 5cdf2e3fea ("blkcg: associate blkg when associating a device")
Reported-and-tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-12 17:43:33 -07:00
Dennis Zhou
7754f669ff blkcg: rename blkg_try_get() to blkg_tryget()
blkg reference counting now uses percpu_ref rather than atomic_t. Let's
make this consistent with css_tryget. This renames blkg_try_get to
blkg_tryget and now returns a bool rather than the blkg or %NULL.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:38 -07:00
Dennis Zhou
7fcf2b033b blkcg: change blkg reference counting to use percpu_ref
Every bio is now associated with a blkg putting blkg_get, blkg_try_get,
and blkg_put on the hot path. Switch over the refcnt in blkg to use
percpu_ref.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:38 -07:00
Dennis Zhou
beea9da07d blkcg: convert blkg_lookup_create() to find closest blkg
There are several scenarios where blkg_lookup_create() can fail such as
the blkcg dying, request_queue is dying, or simply being OOM. Most
handle this by simply falling back to the q->root_blkg and calling it a
day.

This patch implements the notion of closest blkg. During
blkg_lookup_create(), if it fails to create, return the closest blkg
found or the q->root_blkg. blkg_try_get_closest() is introduced and used
during association so a bio is always attached to a blkg.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:36 -07:00
Dennis Zhou
b978962ad4 blkcg: update blkg_lookup_create() to do locking
To know when to create a blkg, the general pattern is to do a
blkg_lookup() and if that fails, lock and do the lookup again, and if
that fails finally create. It doesn't make much sense for everyone who
wants to do creation to write this themselves.

This changes blkg_lookup_create() to do locking and implement this
pattern. The old blkg_lookup_create() is renamed to
__blkg_lookup_create().  If a call site wants to do its own error
handling or already owns the queue lock, they can use
__blkg_lookup_create(). This will be used in upcoming patches.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:36 -07:00
Jens Axboe
344e9ffcbd block: add queue_is_mq() helper
Various spots check for q->mq_ops being non-NULL, but provide
a helper to do this instead.

Where the ->mq_ops != NULL check is redundant, remove it.

Since mq == rq-based now that legacy is gone, get rid of the
queue_is_rq_based() and just use queue_is_mq() everywhere.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-16 08:34:06 -07:00
Christoph Hellwig
0d945c1f96 block: remove the queue_lock indirection
With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Fixed floppy and blk-cgroup missing conversions and half done edits.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:17:28 -07:00
Christoph Hellwig
7fb1763de6 blk-cgroup: move locking into blkg_destroy_all
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:13:28 -07:00
Christoph Hellwig
04be60b5e4 blk-cgroup: consolidate error handling in blkcg_init_queue
Use a goto label to merge two identical pieces of error handling code.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:13:26 -07:00
Christoph Hellwig
b6676f653f block: remove a few unused exports
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:13:25 -07:00
Christoph Hellwig
8f4236d900 block: remove QUEUE_FLAG_BYPASS and ->bypass
Unused since the removal of the legacy request code.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-15 12:13:15 -07:00
Jens Axboe
db6d995235 block: remove request_list code
It's now dead code, nobody uses it.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:33 -07:00
Jens Axboe
2cdf2caecd blk-cgroup: remove legacy queue bypassing
We only support mq devices now.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Dennis Zhou
b5f2954d30 blkcg: revert blkcg cleanups series
This reverts a series committed earlier due to null pointer exception
bug report in [1]. It seems there are edge case interactions that I did
not consider and will need some time to understand what causes the
adverse interactions.

The original series can be found in [2] with a follow up series in [3].

[1] https://www.spinics.net/lists/cgroups/msg20719.html
[2] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/
[3] https://lore.kernel.org/lkml/20181020185612.51587-1-dennis@kernel.org/

This reverts the following commits:
d459d853c2, b2c3fa5467, 101246ec02, b3b9f24f5f, e2b0989954,
f0fcb3ec89, c839e7a03f, bdc2491708, 74b7c02a9b, 5bf9a1f3b4,
a7b39b4e96, 07b05bcc32, 49f4c2dc2b, 27e6fa996c

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-01 19:59:53 -06:00
Jens Axboe
c0aac682fa This is the 4.19-rc6 release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAluw4MIACgkQONu9yGCS
 aT7+8xAAiYnc4khUsxeInm3z44WPfRX1+UF51frTNSY5C8Nn5nvRSnTUNLuKkkrz
 8RbwCL6UYyJxF9I/oZdHPsPOD4IxXkQY55tBjz7ZbSBIFEwYM6RJMm8mAGlXY7wq
 VyWA5MhlpGHM9DjrguB4DMRipnrSc06CVAnC+ZyKLjzblzU1Wdf2dYu+AW9pUVXP
 j4r74lFED5djPY1xfqfzEwmYRCeEGYGx7zMqT3GrrF5uFPqj1H6O5klEsAhIZvdl
 IWnJTU2coC8R/Sd17g4lHWPIeQNnMUGIUbu+PhIrZ/lDwFxlocg4BvarPXEdzgYi
 gdZzKBfovpEsSu5RCQsKWG4IGQxY7I1p70IOP9eqEFHZy77qT1YcHVAWrK1Y/bJd
 UA08gUOSzRnhKkNR3+PsaMflUOl9WkpyHECZu394cyRGMutSS50aWkavJPJ/o1Qi
 D/oGqZLLcKFyuNcchG+Met1TzY3LvYEDgSburqwqeUZWtAsGs8kmiiq7qvmXx4zV
 IcgM8ERqJ8mbfhfsXQU7hwydIrPJ3JdIq19RnM5ajbv2Q4C/qJCyAKkQoacrlKR4
 aiow/qvyNrP80rpXfPJB8/8PiWeDtAnnGhM+xySZNlw3t8GR6NYpUkIzf5TdkSb3
 C8KuKg6FY9QAS62fv+5KK3LB/wbQanxaPNruQFGe5K1iDQ5Fvzw=
 =dMl4
 -----END PGP SIGNATURE-----

Merge tag 'v4.19-rc6' into for-4.20/block

Merge -rc6 in, for two reasons:

1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
   they aren't in the 4.20 branch.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

* tag 'v4.19-rc6': (780 commits)
  Linux 4.19-rc6
  MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
  cpufreq: qcom-kryo: Fix section annotations
  perf/core: Add sanity check to deal with pinned event failure
  xen/blkfront: correct purging of persistent grants
  Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
  selftests/powerpc: Fix Makefiles for headers_install change
  blk-mq: I/O and timer unplugs are inverted in blktrace
  dax: Fix deadlock in dax_lock_mapping_entry()
  x86/boot: Fix kexec booting failure in the SEV bit detection code
  bcache: add separate workqueue for journal_write to avoid deadlock
  drm/amd/display: Fix Edid emulation for linux
  drm/amd/display: Fix Vega10 lightup on S3 resume
  drm/amdgpu: Fix vce work queue was not cancelled when suspend
  Revert "drm/panel: Add device_link from panel device to DRM device"
  xen/blkfront: When purging persistent grants, keep them in the buffer
  clocksource/drivers/timer-atmel-pit: Properly handle error cases
  block: fix deadline elevator drain for zoned block devices
  ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
  drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
  ...

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-01 08:58:57 -06:00
Dennis Zhou (Facebook)
101246ec02 blkcg: rename blkg_try_get to blkg_tryget
blkg reference counting now uses percpu_ref rather than atomic_t. Let's
make this consistent with css_tryget. This renames blkg_try_get to
blkg_tryget and now returns a bool rather than the blkg or NULL.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:19 -06:00
Dennis Zhou (Facebook)
b3b9f24f5f blkcg: change blkg reference counting to use percpu_ref
Now that every bio is associated with a blkg, this puts the use of
blkg_get, blkg_try_get, and blkg_put on the hot path. This switches over
the refcnt in blkg to use percpu_ref.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:18 -06:00
Dennis Zhou (Facebook)
07b05bcc32 blkcg: convert blkg_lookup_create to find closest blkg
There are several scenarios where blkg_lookup_create can fail. Examples
include the blkcg dying, request_queue is dying, or simply being OOM. At
the end of the day, most handle this by simply falling back to the
q->root_blkg and calling it a day.

This patch implements the notion of closest blkg. During
blkg_lookup_create, if it fails to create, return the closest blkg
found or the q->root_blkg. blkg_try_get_closest is introduced and used
during association so a bio is always attached to a blkg.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:05 -06:00
Dennis Zhou (Facebook)
49f4c2dc2b blkcg: update blkg_lookup_create to do locking
To know when to create a blkg, the general pattern is to do a
blkg_lookup and if that fails, lock and then do a lookup again and if
that fails finally create. It doesn't make much sense for everyone who
wants to do creation to write this themselves.

This changes blkg_lookup_create to do locking and implement this
pattern. The old blkg_lookup_create is renamed to __blkg_lookup_create.
If a call site wants to do its own error handling or already owns the
queue lock, they can use __blkg_lookup_create. This will be used in
upcoming patches.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-21 20:29:03 -06:00
Jens Axboe
01c5f85aeb blk-cgroup: increase number of supported policies
After merging the iolatency policy, we potentially now have 4 policies
being registered, but only support 3. This causes one of them to fail
loading. Takashi reports that BFQ no longer works for him, because it
fails to load due to policy registration failure.

Bump to 5 policies, and also add a warning for when we have exceeded
the global amount. If we have to touch this again, we should switch
to a dynamic scheme instead.

Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-11 10:59:53 -06:00
Dennis Zhou (Facebook)
59b57717ff blkcg: delay blkg destruction until after writeback has finished
Currently, blkcg destruction relies on a sequence of events:
  1. Destruction starts. blkcg_css_offline() is called and blkgs
     release their reference to the blkcg. This immediately destroys
     the cgwbs (writeback).
  2. With blkgs giving up their reference, the blkcg ref count should
     become zero and eventually call blkcg_css_free() which finally
     frees the blkcg.

Jiufei Xue reported that there is a race between blkcg_bio_issue_check()
and cgroup_rmdir(). To remedy this, blkg destruction becomes contingent
on the completion of all writeback associated with the blkcg. A count of
the number of cgwbs is maintained and once that goes to zero, blkg
destruction can follow. This should prevent premature blkg destruction
related to writeback.

The new process for blkcg cleanup is as follows:
  1. Destruction starts. blkcg_css_offline() is called which offlines
     writeback. Blkg destruction is delayed on the cgwb_refcnt count to
     avoid punting potentially large amounts of outstanding writeback
     to root while maintaining any ongoing policies. Here, the base
     cgwb_refcnt is put back.
  2. When the cgwb_refcnt becomes zero, blkcg_destroy_blkgs() is called
     and handles destruction of blkgs. This is where the css reference
     held by each blkg is released.
  3. Once the blkcg ref count goes to zero, blkcg_css_free() is called.
     This finally frees the blkg.

It seems in the past blk-throttle didn't do the most understandable
things with taking data from a blkg while associating with current. So,
the simplification and unification of what blk-throttle is doing caused
this.

Fixes: 08e18eab0c ("block: add bi_blkg to the bio for cgroups")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-31 14:48:56 -06:00
Dennis Zhou (Facebook)
6b06546206 Revert "blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()"
This reverts commit 4c6994806f.

Destroying blkgs is tricky because of the nature of the relationship. A
blkg should go away when either a blkcg or a request_queue goes away.
However, blkg's pin the blkcg to ensure they remain valid. To break this
cycle, when a blkcg is offlined, blkgs put back their css ref. This
eventually lets css_free() get called which frees the blkcg.

The above commit (4c6994806f) breaks this order of events by trying to
destroy blkgs in css_free(). As the blkgs still hold references to the
blkcg, css_free() is never called.

The race between blkcg_bio_issue_check() and cgroup_rmdir() will be
addressed in the following patch by delaying destruction of a blkg until
all writeback associated with the blkcg has been finished.

Fixes: 4c6994806f ("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-31 14:48:54 -06:00
Josef Bacik
cc7ecc2585 blk-cgroup: hold the queue ref during throttling
The blkg lifetime is protected by the queue lifetime, so we need to put
the queue _after_ we're done using the blkg.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-01 09:16:03 -06:00
Tejun Heo
636620b66d blkcg: Track DISCARD statistics and output them in cgroup io.stat
Add tracking of REQ_OP_DISCARD ios to the per-cgroup io.stat.  Two
fields, dbytes and dios, to respectively count the total bytes and
number of discards are added.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18 08:44:23 -06:00
Josef Bacik
d706751215 block: introduce blk-iolatency io controller
Current IO controllers for the block layer are less than ideal for our
use case.  The io.max controller is great at hard limiting, but it is
not work conserving.  This patch introduces io.latency.  You provide a
latency target for your group and we monitor the io in short windows to
make sure we are not exceeding those latency targets.  This makes use of
the rq-qos infrastructure and works much like the wbt stuff.  There are
a few differences from wbt

 - It's bio based, so the latency covers the whole block layer in addition to
   the actual io.
 - We will throttle all IO types that comes in here if we need to.
 - We use the mean latency over the 100ms window.  This is because writes can
   be particularly fast, which could give us a false sense of the impact of
   other workloads on our protected workload.
 - By default there's no throttling, we set the queue_depth to INT_MAX so that
   we can have as many outstanding bio's as we're allowed to.  Only at
   throttle time do we pay attention to the actual queue depth.
 - We backcharge cgroups for root cg issued IO and induce artificial
   delays in order to deal with cases like metadata only or swap heavy
   workloads.

In testing this has worked out relatively well.  Protected workloads
will throttle noisy workloads down to 1 io at time if they are doing
normal IO on their own, or induce up to a 1 second delay per syscall if
they are doing a lot of root issued IO (metadata/swap IO).

Our testing has revolved mostly around our production web servers where
we have hhvm (the web server application) in a protected group and
everything else in another group.  We see slightly higher requests per
second (RPS) on the test tier vs the control tier, and much more stable
RPS across all machines in the test tier vs the control tier.

Another test we run is a slow memory allocator in the unprotected group.
Before this would eventually push us into swap and cause the whole box
to die and not recover at all.  With these patches we see slight RPS
drops (usually 10-15%) before the memory consumer is properly killed and
things recover within seconds.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Josef Bacik
d09d8df3a2 blkcg: add generic throttling mechanism
Since IO can be issued from literally anywhere it's almost impossible to
do throttling without having some sort of adverse effect somewhere else
in the system because of locking or other dependencies.  The best way to
solve this is to do the throttling when we know we aren't holding any
other kernel resources.  Do this by tracking throttling in a per-blkg
basis, and if we require throttling flag the task that it needs to check
before it returns to user space and possibly sleep there.

This is to address the case where a process is doing work that is
generating IO that can't be throttled, whether that is directly with a
lot of REQ_META IO, or indirectly by allocating so much memory that it
is swamping the disk with REQ_SWAP.  We can't use task_add_work as we
don't want to induce a memory allocation in the IO path, so simply
saving the request queue in the task and flagging it to do the
notify_resume thing achieves the same result without the overhead of a
memory allocation.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Josef Bacik
903d23f0a3 blk-cgroup: allow controllers to output their own stats
blk-iolatency has a few stats that it would like to print out, and
instead of adding a bunch of crap to the generic code just provide a
helper so that controllers can add stuff to the stat line if they want
to.

Hide it behind a boot option since it changes the output of io.stat from
normal, and these stats are only interesting to developers.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-09 09:07:54 -06:00
Jiang Biao
901932a3f9 blkcg: init root blkcg_gq under lock
The initializing of q->root_blkg is currently outside of queue lock
and rcu, so the blkg may be destroied before the initializing, which
may cause dangling/null references. On the other side, the destroys
of blkg are protected by queue lock or rcu. Put the initializing
inside the queue lock and rcu to make it safer.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Tejun Heo <tj@kernel.org>
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-19 08:51:59 -06:00
Jiang Biao
bea548831b blkcg: small fix on comment in blkcg_init_queue
The comment before blkg_create() in blkcg_init_queue() was moved
from blkcg_activate_policy() by commit ec13b1d6f0, but
it does not suit for the new context.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Tejun Heo <tj@kernel.org>
CC: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-19 08:51:57 -06:00
Jiang Biao
946b81da11 blkcg: don't hold blkcg lock when deactivating policy
As described in the comment of blkcg_activate_policy(),
*Update of each blkg is protected by both queue and blkcg locks so
that holding either lock and testing blkcg_policy_enabled() is
always enough for dereferencing policy data.*
with queue lock held, there is no need to hold blkcg lock in
blkcg_deactivate_policy(). Similar case is in
blkcg_activate_policy(), which has removed holding of blkcg lock in
commit 4c55f4f9ad.

Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-18 08:37:18 -06:00
Joseph Qi
4c6994806f blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()
We've triggered a WARNING in blk_throtl_bio() when throttling writeback
io, which complains blkg->refcnt is already 0 when calling blkg_get(),
and then kernel crashes with invalid page request.
After investigating this issue, we've found it is caused by a race
between blkcg_bio_issue_check() and cgroup_rmdir(), which is described
below:

writeback kworker               cgroup_rmdir
                                  cgroup_destroy_locked
                                    kill_css
                                      css_killed_ref_fn
                                        css_killed_work_fn
                                          offline_css
                                            blkcg_css_offline
  blkcg_bio_issue_check
    rcu_read_lock
    blkg_lookup
                                              spin_trylock(q->queue_lock)
                                              blkg_destroy
                                              spin_unlock(q->queue_lock)
    blk_throtl_bio
    spin_lock_irq(q->queue_lock)
    ...
    spin_unlock_irq(q->queue_lock)
  rcu_read_unlock

Since rcu can only prevent blkg from releasing when it is being used,
the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule
blkg release.
Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING.
And then the corresponding blkg_put() will schedule blkg release again,
which result in double free.
This race is introduced by commit ae11889636 ("blkcg: consolidate blkg
creation in blkcg_bio_issue_check()"). Before this commit, it will
lookup first and then try to lookup/create again with queue_lock. Since
revive this logic is a bit drastic, so fix it by only offlining pd during
blkcg_css_offline(), and move the rest destruction (especially
blkg_put()) into blkcg_css_free(), which should be the right way as
discussed.

Fixes: ae11889636 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()")
Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 10:35:12 -06:00
Jan Kara
9df6c29912 genhd: Add helper put_disk_and_module()
Add a proper counterpart to get_disk_and_module() -
put_disk_and_module(). Currently it is opencoded in several places.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-26 09:48:42 -07:00
weiping zhang
e840107322 blkcg: add sanity check for blkcg policy operations
blkcg policy should keep cpd/pd's alloc_fn and free_fn in pairs,
otherwise policy would register fail.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04 12:31:15 -06:00
weiping zhang
58a9edce0a blkcg: check pol->cpd_free_fn before free cpd
check pol->cpd_free_fn() instead of pol->cpd_alloc_fn() when free cpd.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-10 09:04:47 -06:00
weiping zhang
4c18c9e962 blkcg: avoid free blkcg_root when failed to alloc blkcg policy
this patch fix two errors, firstly avoid kfree blk_root, secondly not
free(blkcg) ,if blkcg alloc fail(blkcg == NULL), just unlock that mutex;

Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-25 13:51:07 -06:00
Bart Van Assche
b425e50492 block: Avoid that blk_exit_rl() triggers a use-after-free
Since the introduction of .init_rq_fn() and .exit_rq_fn() it is
essential that the memory allocated for struct request_queue
stays around until all blk_exit_rl() calls have finished. Hence
make blk_init_rl() take a reference on struct request_queue.

This patch fixes the following crash:

general protection fault: 0000 [#2] SMP
CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G      D         4.12.0-rc2-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
task: ffff88013a108040 task.stack: ffffc9000071c000
RIP: 0010:free_request_size+0x1a/0x30
RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003
RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418
RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009
R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8
R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a
FS:  0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0
Call Trace:
 mempool_destroy.part.10+0x21/0x40
 mempool_destroy+0xe/0x10
 blk_exit_rl+0x12/0x20
 blkg_free+0x4d/0xa0
 __blkg_release_rcu+0x59/0x170
 rcu_process_callbacks+0x260/0x4e0
 __do_softirq+0x116/0x250
 smpboot_thread_fn+0x123/0x1e0
 kthread+0x109/0x140
 ret_from_fork+0x31/0x40

Fixes: commit e9c787e65c ("scsi: allocate scsi_cmnd structures as part of struct request")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01 13:07:55 -06:00
Tahsin Erdogan
457e490f2b blkcg: allocate struct blkcg_gq outside request queue spinlock
blkg_conf_prep() currently calls blkg_lookup_create() while holding
request queue spinlock. This means allocating memory for struct
blkcg_gq has to be made non-blocking. This causes occasional -ENOMEM
failures in call paths like below:

  pcpu_alloc+0x68f/0x710
  __alloc_percpu_gfp+0xd/0x10
  __percpu_counter_init+0x55/0xc0
  cfq_pd_alloc+0x3b2/0x4e0
  blkg_alloc+0x187/0x230
  blkg_create+0x489/0x670
  blkg_lookup_create+0x9a/0x230
  blkg_conf_prep+0x1fb/0x240
  __cfqg_set_weight_device.isra.105+0x5c/0x180
  cfq_set_weight_on_dfl+0x69/0xc0
  cgroup_file_write+0x39/0x1c0
  kernfs_fop_write+0x13f/0x1d0
  __vfs_write+0x23/0x120
  vfs_write+0xc2/0x1f0
  SyS_write+0x44/0xb0
  entry_SYSCALL_64_fastpath+0x18/0xad

In the code path above, percpu allocator cannot call vmalloc() due to
queue spinlock.

A failure in this call path gives grief to tools which are trying to
configure io weights. We see occasional failures happen shortly after
reboots even when system is not under any memory pressure. Machines
with a lot of cpus are more vulnerable to this condition.

Do struct blkcg_gq allocations outside the queue spinlock to allow
blocking during memory allocations.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-29 11:27:19 -06:00
Jens Axboe
d708f0d502 Revert "blkcg: allocate struct blkcg_gq outside request queue spinlock"
I inadvertently applied the v5 version of this patch, whereas
the agreed upon version was v5. Revert this one so we can apply
the right one.

This reverts commit 7fc6b87a9f.
2017-03-29 11:25:48 -06:00
Tahsin Erdogan
7fc6b87a9f blkcg: allocate struct blkcg_gq outside request queue spinlock
blkg_conf_prep() currently calls blkg_lookup_create() while holding
request queue spinlock. This means allocating memory for struct
blkcg_gq has to be made non-blocking. This causes occasional -ENOMEM
failures in call paths like below:

  pcpu_alloc+0x68f/0x710
  __alloc_percpu_gfp+0xd/0x10
  __percpu_counter_init+0x55/0xc0
  cfq_pd_alloc+0x3b2/0x4e0
  blkg_alloc+0x187/0x230
  blkg_create+0x489/0x670
  blkg_lookup_create+0x9a/0x230
  blkg_conf_prep+0x1fb/0x240
  __cfqg_set_weight_device.isra.105+0x5c/0x180
  cfq_set_weight_on_dfl+0x69/0xc0
  cgroup_file_write+0x39/0x1c0
  kernfs_fop_write+0x13f/0x1d0
  __vfs_write+0x23/0x120
  vfs_write+0xc2/0x1f0
  SyS_write+0x44/0xb0
  entry_SYSCALL_64_fastpath+0x18/0xad

In the code path above, percpu allocator cannot call vmalloc() due to
queue spinlock.

A failure in this call path gives grief to tools which are trying to
configure io weights. We see occasional failures happen shortly after
reboots even when system is not under any memory pressure. Machines
with a lot of cpus are more vulnerable to this condition.

Update blkg_create() function to temporarily drop the rcu and queue
locks when it is allowed by gfp mask.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28 15:59:04 -06:00
Ingo Molnar
174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Hou Tao
9b54d816e0 blkcg: fix double free of new_blkg in blkcg_init_queue
If blkg_create fails, new_blkg passed as an argument will
be freed by blkg_create, so there is no need to free it again.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-03 07:52:35 -07:00
Jan Kara
dc3b17cc8b block: Use pointer to backing_dev_info from request_queue
We will want to have struct backing_dev_info allocated separately from
struct request_queue. As the first step add pointer to backing_dev_info
to request_queue and convert all users touching it. No functional
changes in this patch.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-02 08:20:48 -07:00
Jens Axboe
38dbb7dd4d blk-cgroup: don't quiesce the queue on policy activate/deactivate
There's no potential harm in quiescing the queue, but it also doesn't
buy us anything. And we can't run the queue async for policy
deactivate, since we could be in the path of tearing the queue down.
If we schedule an async run of the queue at that time, we're racing
with queue teardown AFTER having we've already torn most of it down.

Reported-by: Omar Sandoval <osandov@fb.com>
Fixes: 4d199c6f1c ("blk-cgroup: ensure that we clear the stop bit on quiesced queues")
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-18 15:37:27 -07:00
Jens Axboe
4d199c6f1c blk-cgroup: ensure that we clear the stop bit on quiesced queues
If we call blk_mq_quiesce_queue() on a queue, we must remember to
pair that with something that clears the stopped by on the
queues later on.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-18 07:43:26 -07:00
Jens Axboe
bd166ef183 blk-mq-sched: add framework for MQ capable IO schedulers
This adds a set of hooks that intercepts the blk-mq path of
allocating/inserting/issuing/completing requests, allowing
us to develop a scheduler within that framework.

We reuse the existing elevator scheduler API on the registration
side, but augment that with the scheduler flagging support for
the blk-mq interfce, and with a separate set of ops hooks for MQ
devices.

We split driver and scheduler tags, so we can run the scheduling
independently of device queue depth.

Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
2017-01-17 10:04:20 -07:00
Tejun Heo
e00f4f4d0f block,blkcg: use __GFP_NOWARN for best-effort allocations in blkcg
blkcg allocates some per-cgroup data structures with GFP_NOWAIT and
when that fails falls back to operations which aren't specific to the
cgroup.  Occassional failures are expected under pressure and falling
back to non-cgroup operation is the right thing to do.

Unfortunately, I forgot to add __GFP_NOWARN to these allocations and
these expected failures end up creating a lot of noise.  Add
__GFP_NOWARN.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Marc MERLIN <marc@merlins.org>
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-22 08:59:49 -07:00
Bart Van Assche
bbb427e342 blkcg: Unlock blkcg_pol_mutex only once when cpd == NULL
Unlocking a mutex twice is wrong. Hence modify blkcg_policy_register()
such that blkcg_pol_mutex is unlocked once if cpd == NULL. This patch
avoids that smatch reports the following error:

block/blk-cgroup.c:1378: blkcg_policy_register() error: double unlock 'mutex:&blkcg_pol_mutex'

Fixes: 06b285bd11 ("blkcg: fix blkcg_policy_data allocation bug")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-30 10:31:20 +02:00
Bart Van Assche
e1f3b9412e block/blk-cgroup.c: Declare local symbols static
Detected by sparse.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14 09:09:33 -06:00