Commit Graph

579 Commits

Author SHA1 Message Date
Zhenyu Wang
e6be8d9d17 drm: remove address mask param for drm_pci_alloc()
drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:15:50 +10:00
Arnd Bergmann
ed8b670409 drm: convert drm_ioctl to unlocked_ioctl
drm_ioctl is called with the Big Kernel Lock held,
which shows up very high in statistics on vfs_ioctl.

Moving the lock into the drm_ioctl function itself
makes sure we blame the right subsystem and it gets
us one step closer to eliminating the locked version
of fops->ioctl.

Since drm_ioctl does not require the lock itself,
we only need to hold it while calling the specific
handler. The 32 bit conversion handlers do not
interact with any other code, so they don't need
the BKL here either and can just call drm_ioctl.

As a bonus, this cleans up all the other users
of drm_ioctl which now no longer have to find
the inode or call lock_kernel.

[airlied: squashed the non-driver bits
of the second patch in here, this provides
the flag for drivers to use to select unlocked
ioctls - but doesn't modify any drivers].

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.sourceforge.net
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-18 11:22:31 +10:00
Dave Airlie
0b5e8db639 Merge remote branch 'anholt/drm-intel-next' into drm-linus
Pull more Intel changes in, especially one to init the GTT properly
2009-12-10 15:44:19 +10:00
Chris Wilson
4f8d619cc3 drm/i915: Remove a debugging printk from hangcheck
A residual bare printk survived the merger of the hang detector, remove
this debugging left-over.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08 23:40:47 -08:00
Andrew Lutomirski
7e8b60faea drm/i915: restore render clock gating on resume
Rather than restoring just a few clock gating registers on resume,
just reinitialize the whole thing.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
[anholt: Fixed up for RC6 support landed since the patch was written]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-08 06:32:51 -08:00
Dave Airlie
3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
Dave Airlie
1bd049fa89 Merge branch 'drm-core-next' into drm-linus
Bring all core drm changes into 2.6.32 tree and resolve
the conflict that occurs.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 13:52:41 +10:00
Chris Wilson
5618ca6abc drm/i915: Set the error code after failing to insert new offset into mm ht.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07 15:44:30 -08:00
Chris Wilson
fcffb94766 drm/i915: Report purgeable status in buffer lists.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07 15:39:32 -08:00
Dave Airlie
ab2c067298 drm/intel: refactor DP i2c support and DP common header to drm helper
Both radeon and nouveau can re-use this code so move it up a level
so they can. However the hw interfaces for aux ch are different
enough that the code to translate from mode, address, bytes
to actual hw interfaces isn't generic, so move that code into the
Intel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 09:24:23 +10:00
Adam Jackson
f2b115e69d drm/i915: Fix product names and #defines
IGD* isn't a useful name.  Replace with the codenames, as sourced from
pci.ids.

Signed-off-by: Adam Jackson <ajax@redhat.com>
[anholt: Fixed up for merge with pineview/ironlake changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07 14:55:56 -08:00
Chris Wilson
ffb4728095 drm/i915: Drop a some common DRM_ERROR()
These are handled by the error return being propagated to user-space and
do not any add any information to the original error, so are useless.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07 12:18:28 -08:00
Jesse Barnes
85364905f9 drm/i915: warn if Pineview CxSR can't be enabled
If we don't detect a supported memory configuration, we can't enable
CxSR.  Warn the user in this case so they can file a bug.
2009-12-07 12:11:52 -08:00
Jesse Barnes
22fd0fab3b drm/i915: pageflip fixes
This patch brings the tree up to date with some fixes that were in a
more recent version of the page flipping patch you applied.  It fixes
pre-965 flip support, removes a leftover hack that forced alignment,
and initializes the pipe & plane CRTC mappings.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-07 12:06:00 -08:00
Zhao Yakui
6e36595a21 drm/i915: Declare the new VBT parsing functions as static
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 23:27:20 -08:00
Zhao Yakui
652af9d74e drm/i915: Add the missing clonemask for display port on Ironlake
Add the missing clonemask for display port on Ironlake.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
cc: stable@kernel.org
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 23:26:36 -08:00
Zhao Yakui
f24bc39fac drm/i915: fix the incorrect condition judgement in dp_is_present_in_vbt
We were always looking for the PORT_IDPB entry.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 23:25:17 -08:00
Eric Anholt
f0217c42c9 drm/i915: Fix DDC on some systems by clearing BIOS GMBUS setup.
This is a sync of a fix I made in the old UMS code.  If the BIOS uses
the GMBUS and doesn't clear that setup, then our bit-banging I2C can
fail, leading to monitors not being detected.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 11:56:30 -08:00
Zhao Yakui
d09c23de9f drm/i915: Add 30ms delay to make SDVO TV detection reliable.
Without this, on some boots the TV wouldn't be detected.  Testing
showed 15ms to be insufficient.

https://bugs.freedesktop.org/show_bug.cgi?id=24290
https://bugs.freedesktop.org/show_bug.cgi?id=20785

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Yan Seiner <yan@seiner.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:33:12 -08:00
Li Peng
778c902640 drm/i915: Fix sync to vblank when VGA output is turned off
In current vblank-wait implementation, if we turn off VGA output,
drm_wait_vblank will still wait on the disabled pipe until timeout,
because vblank on the pipe is assumed be enabled. This would cause
slow system response on some system such as moblin.

This patch resolve the issue by adding a drm helper function
drm_vblank_off which explicitly clear vblank_enabled[crtc], wake up
any waiting queue and save last vblank counter before turning off
crtc. It also slightly change drm_vblank_get to ensure that we will
will return immediately if trying to wait on a disabled pipe.

Signed-off-by: Li Peng <peng.li@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: hand-applied for conflicts with overlay changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:27:40 -08:00
Adam Jackson
27dfaf4f58 drm/i915: disable the interrupt hotplug for integrated TV output
Otherwise, I'd get stuck in a loop where (afaict) output scan would
trigger a TV interrupt, which would trigger a scan, etc.  TV load
detection not being the fastest thing in the world, X would process
requests very slowly.

https://bugs.freedesktop.org/show_bug.cgi?id=24404

Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:49:36 -08:00
Chris Wilson
28cf798f5a drm/i915: Don't update the render-clock for every bo.
Only update the render-clock on transition from busy to idle and vice
versa, or else we burn a significant percentage of the cpu just rewriting
the register -- not quite as power-friendly as intended ;-)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:42:16 -08:00
Adam Jackson
38b3037ee4 drm/i915: Fix LVDS presence check
Assume that either the presence of an LVDS entry in the VBT or an ACPI
lid device indicates an LVDS device.  ACPI lid alone is not sufficient.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:28:58 -08:00
Eric Anholt
05dd8f973f drm/i915: Fix warning introduced with the page flipping ioctl.
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:25:23 -08:00
Jesse Barnes
e9560f7cb2 drm/i915: add GETPARAM request for page flipping
Add a GETPARAM request for checking if page flipping is supported.
Useful for the 2D driver to enable the flipping path.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:19:07 -08:00
Kristian Høgsberg
6b95a207c1 drm/i915: Add intel implementation of the pageflip ioctl
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Acked-by: Thomas Hellström <thomas@shipmail.org>
Review-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse "Orange Smoothie" Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:10:35 -08:00
Zhenyu Wang
103a196f42 drm/i915: PineView only has LVDS and CRT ports
PineView only has 2 ports for LVDS and CRT. Don't enable other
ports for it.

Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:00:04 -08:00
Zhao Yakui
c35614380d drm/i915: Don't set up the TV port if it isn't in the BIOS table.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:54:42 -08:00
Zhao Yakui
7cf4f69d3f drm/i915: Don't set up the LVDS if it isn't in the BIOS device table.
We not only check the device type, but also check the addin_offset. If the
addin_offset is zero, it won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: hand-applied due to conflicts]
2009-11-30 16:54:35 -08:00
Zhao Yakui
ae266c98f5 drm/i915: Don't set up DP ports that aren't in the BIOS device table.
Use the child device array to decide whether the given DP output should be
initialized. If the given DP port can't be found in child device array,
it is not present and won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:42:56 -08:00
Zhao Yakui
fc81665523 drm/i915: Don't set up HDMI ports that aren't in the BIOS device table.
Use the child device array to decide whether the given HDMI output should be
initialized. If the given HDMI port can't be found in child device array,
it is not present and won't be initialized.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:41:48 -08:00
Zhao Yakui
6363ee6f49 drm/i915: parse child device from VBT
On some laptops there is no HDMI/DP. But the xrandr still reports
several disconnected HDMI/display ports. In such case the user will be
confused.
 >DVI1 disconnected (normal left inverted right x axis y axis)
 >DP1 disconnected (normal left inverted right x axis y axis)
 >DVI2 disconnected (normal left inverted right x axis y axis)
 >DP2 disconnected (normal left inverted right x axis y axis)
 >DP3 disconnected (normal left inverted right x axis y axis)

This patch set is to use the child device parsed in VBT to decide whether
the HDMI/DP/LVDS/TV should be initialized.

Parse the child device from VBT.

The device class type is also added for LFP, TV, HDMI, DP output.

https://bugs.freedesktop.org/show_bug.cgi?id=22785

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:36:53 -08:00
Kristian Høgsberg
c1b5dea097 drm/i915: Disable pwrctx before unpin and free
Otherwise the chip may scribble over free memory.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:27:23 -08:00
Kristian Høgsberg
69341a5e01 drm/i915: Hold struct_mutex while unreffing pwrctx object
This also extends the mutex to cover fbc disabling, which is safe.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:27:07 -08:00
Kristian Høgsberg
33db679b4e drm/i915: Unregister i915_wedged debugfs entry using the right key
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 16:24:23 -08:00
Shaohua Li
29874f44fb drm/i915: fix gpio register detection logic for BIOS without VBT
if no VBT is present, crt_ddc_bus will be left at 0, and cause us
to use that for the GPIO register offset. That's never a valid register
offset, so let the "undefined" value be 0 instead of -1.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: clarified the commit message a bit]
2009-11-30 16:10:56 -08:00
Chris Wilson
d271817bae drm/i915: Avoid NULL dereference with component_only tv_modes
In commit d2d9f2324, the guard for a valid video mode was removed. This
caused the regression:

  kernel crash during kms graphic boot on Intel GM4500 platform
  https://bugzilla.redhat.com/show_bug.cgi?id=540218

This patches changes the logic slightly not to rely on a coupled
variable, but to just check whether the video_modes is valid before
dereferencing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Zhenyu Wang <zhenyu.z.wang@intel.com>
[ickle: Actually reference the correct bug report]
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 15:16:32 -08:00
Daniel Vetter
9bedb9743f drm/i915: fixup interrupted overlay switch off calls
When switching to interruptible sleeps in the overlay code, I've
forgotten to recover from interruptions at one site.  This
resulted in the overlay still running when it should have been
switched off. This in turn caused a hang on resume because it
tried to disable the (not-running) overlay in preparation for the
resume modeset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24980
Tested-by: maximlevitsky@gmail.com

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 09:50:57 -08:00
Daniel Vetter
12ca45fea9 drm/i915: overlay: extract some duplicated code
I've suspected some bug there wrt to suspend, but that was not
the case. Clean up the code anyway.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 09:44:23 -08:00
Shaohua Li
2644487781 drm/i915: remove Pineview EOS protection support
HW guys have an evaluation about the impact about EOS, and say the impact
is quite small, so they have removed EOS detection support. This patch
removes EOS feature.

revert commit 0430296558
directly reverting it gives a hunk error, so please use this one.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
[anholt: fixed up commit message for update that the feature's really gone]
2009-11-30 09:42:12 -08:00
Shaohua Li
311089d3d3 drm/i915: use msleep for intel_wait_for_vblank
20ms delay is quite big and the routine isn't called in atomic context.
better use msleep to let other tasks run. This can reduce cpu time used
by Xorg, so potentially boost boot.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-30 09:39:57 -08:00
Shaohua Li
1991bdfaf5 drm/i915: handle failure path correctly for lvds
In failure path, make sure encoder is cleaned up, otherwise there
is a kernel oops.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 13:45:55 -08:00
Zhenyu Wang
1b3c7a47f9 drm/i915: Fix LVDS stability issue on Ironlake
In disable sequence, all output ports on PCH have to be disabled
before PCH transcoder, but LVDS port was left always enabled. This
one fixes that by disable LVDS port properly during pipe disable
process, and resolved stability issue seen on Ironlake. Also move
panel fitting disable time just after pipe disable to align with
the spec.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 13:09:35 -08:00
Zhao Yakui
4215866059 drm/i915: Restore the DPLL calculation logic for 9xx platform
The DPLL calculation logic for 9xx platform is changed in:
commit 652c393a33
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Mon Aug 17 13:31:43 2009 -0700

    drm/i915: add dynamic clock frequency control

Maybe we will get the different M/N/P combination with that by using the
previous dpll calculation logic.

So restore the DPLL calculation logic for 9xx platform.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 13:03:12 -08:00
Zhao Yakui
d1fcea6a52 drm/i915: Check whether the LVDS downclock is found in VBT
Enumerate the LVDS panel timing info entry list in VBT to check whether
the LVDS downclock is found. If found, the downclock is also used to switch
dynamically between low and high frequency for LVDS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 13:02:33 -08:00
Zhao Yakui
18f9ed12f8 drm/i915: Enable LVDS downclock feature through EDID.
If more than one mode with the same resolution defined in EDID has different
refresh rate, it is thought that the downclock is found for LVDS.
We will program the different FPx0/1 register so that we can select dynamically
between the low and high frequency.

On the g4x platform we will use the CxSR feature to switch the different
refresh rate if the LVDS downclock feature is supported.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 12:46:41 -08:00
Zhenyu Wang
8e9e0eea99 drm/i915: Fix CRT hotplug detect by checking really no channels attached
For CRT hotplug detect status, we have four test results as blue
channel only, green channel only, both blue and green channel, and
no channel attached. Origin code only marks both blue and green channel
case as connected, but ignore other possible connected states. This one
trys to detect CRT by checking no channel attached case instead.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 12:10:18 -08:00
Eric Anholt
c8e0f93a38 drm/i915: Replace a calloc followed by copying data over it with malloc.
Execbufs involve quite a bit of payload, to the extent that cache misses
show up in the profiles here, and a suspicion that some of those cachelines
may get evicted and then reloaded in the subsequent copy.

This is still abstracted like drm_calloc_large since we want to check for
size overflow, and because we want to choose between kmalloc and vmalloc
on the fly.  cairo's interface for malloc-with-calloc's-args was used as
the model.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 06:36:21 -08:00
Kristian Høgsberg
c9a9c5e02a drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:47 +10:00
Zhenyu Wang
5586c8bc93 drm/i915: Add more registers save/restore for Ironlake suspend
Add more display registers save/restore to fix unstable issues
during S4 testing on Ironlake. And DPLL_B_MD should not be restored
on Ironlake.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-12 11:21:14 -08:00