Commit Graph

97 Commits

Author SHA1 Message Date
Ingo Molnar
3de352bbd8 Merge branch 'x86/mpparse' into x86/devel
Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/io_apic_32.c
	arch/x86/kernel/setup_64.c
	arch/x86/mm/init_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 11:14:58 +02:00
Ingo Molnar
896395c290 Merge branch 'linus' into tmp.x86.mpparse.new 2008-07-08 10:32:56 +02:00
Ingo Molnar
3c1ca43faf Merge branch 'x86/setup' into x86/devel 2008-07-08 09:43:01 +02:00
Ben Collins
6bcb13b35a x86: config option to disable info from decompression of the kernel
This patch allows the disabling of decompression messages during
x86 bootup.

Signed-off-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-03 14:34:02 +02:00
H. Peter Anvin
2ee2394b68 x86: fix regression: boot failure on AMD Elan TS-5500
Jeremy Fitzhardinge wrote:
>
> Maybe it really does require the far jump immediately after setting PE
> in cr0...
>
> Hm, I don't remember this paragraph being in vol 3a, section 8.9.1
> before.  Is it a recent addition?
>
>    Random failures can occur if other instructions exist between steps
>    3 and 4 above.  Failures will be readily seen in some situations,
>    such as when instructions that reference memory are inserted between
>    steps 3 and 4 while in system management mode.
>

I don't remember that, either.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-01 10:53:29 +02:00
H. Peter Anvin
908ec7afac x86: remove arbitrary ELF section limit in i386 relocatable kernel
Impact: build failure in maximal configurations

The 32-bit x86 relocatable kernel requires an auxilliary host program
to process the relocations.  This program had a hard-coded arbitrary
limit of a 100 ELF sections.  Instead of a hard-coded limit, allocate
the structures dynamically.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2008-06-30 20:22:58 -07:00
H. Peter Anvin
aa60d13fb0 x86: setup: issue a null command after enabling A20 via KBC
Apparently, DOS and possibly other legacy operating systems issued a
null command to the keyboard controller after toggling A20,
specifically "pulse output pins" with no output pins specified.  This
was presumably done for synchronization reasons.  This has made it
into at least the UHCI spec, and it has been found to cause
compatibility problems when "legacy USB" is enabled (which it almost
always is) to not have this byte sent.

It is *NOT* clear if any of these compatibility problems has any
effect on Linux.  However, for maximum compatibility, issue this null
command after togging A20 through the KBC.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-06-27 13:29:01 -07:00
Ingo Molnar
1791a78c0b Merge branch 'linus' into x86/cleanups 2008-06-16 11:17:50 +02:00
Manish Katiyar
52aaa12fbe x86: fix unused variable 'loops' warning in arch/x86/boot/a20.c
Following patch fixes the below warning message :
arch/x86/boot/a20.c:118: warning: unused variable 'loops'

Signed-off-by : Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12 21:27:05 +02:00
Yinghai Lu
d49c428840 x86: make generic arch support NUMAQ
... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.

NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:34:42 +02:00
Kristian Høgsberg
3b6b9293d0 x86: Honor 'quiet' command line option in real mode boot decompressor.
This patch lets the early real mode code look for the 'quiet' option
on the kernel command line and pass a loadflag to the decompressor.
When this flag is set, we suppress the "Decompressing Linux... Parsing
ELF... done." messages.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:00:47 -07:00
Kristian Høgsberg
23968f71b2 x86: Use structs instead of hardcoded offsets in x86 boot decompressor.
Replace hardcoded offsets embedded in macros in
arch/x86/boot/compressed with proper structure references.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-30 17:00:34 -07:00
Dave Jones
c7d624d1ee x86: Fix up silly i1586 boot message.
Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets
you an amusing message along the lines of.
"you need an x86-64, but you only have an i1586"
due to the P4 being family F.  Munge it to be 686.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-05-28 10:34:12 -07:00
Paul Jackson
c3965bd151 x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant
This patch is motivated by a subsequent patch which will allow for more
memory map entries on EFI supported systems than can be passed via the x86
legacy BIOS E820 interface.  The legacy interface is limited to E820MAX ==
128 memory entries, and that "E820MAX" manifest constant was used as the
size for several arrays and loops over those arrays.

The primary change in this patch is to change code loop sizes over those
arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro
evaluated for the array being looped.  That way, a subsequent patch can
change the size of some of these arrays, without breaking this code.

This patch also adds a parameter to the sanitize_e820_map() routine,
which had an implicit size for the array passed it of E820MAX entries.
This new parameter explicitly passes the size of said array.  Once again,
this will allow a subsequent patch to change that array size for some
calls to sanitize_e820_map() without breaking the code.

As part of enhancing the sanitize_e820_map() interface this way, I further
combined the unnecessarily distinct x86_32 and x86_64 declarations for
this routine into a single, commonly used, declaration.

This patch in itself should make no difference to the resulting kernel
binary.

[ mingo@elte.hu: merged to -tip ]

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 10:55:11 +02:00
Miklos Vajna
2141261a11 x86: janitor work in video-vga.c
Just moved an open brace to the previous line.

Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 08:58:35 +02:00
Cyrill Gorcunov
e83e31f41a x86: compressed/head_64.S cleanup - use predefined flags from processor-flags.h
We should better use already defined flags from processor-flags.h instead
of defining own ones

[>>> object code check >>>]

original
md5sum: 129f24be6df396fb7d8bf998c01fc716  arch/x86/boot/compressed/head_64.o
   text    data     bss     dec     hex filename
    705      48   45056   45809    b2f1 arch/x86/boot/compressed/head_64.o

patched
md5sum: 129f24be6df396fb7d8bf998c01fc716  arch/x86/boot/compressed/head_64-new.o
   text    data     bss     dec     hex filename
    705      48   45056   45809    b2f1 arch/x86/boot/compressed/head_64-new.o

[<<< object code check <<<]

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 08:58:32 +02:00
Thomas Gleixner
535694f361 x86: boot/printfc use NULL instead 0
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25 08:58:25 +02:00
Harvey Harrison
7fafd91d85 x86: fix integer as NULL pointer warning
arch/x86/boot/printf.c:59:10: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-23 08:11:06 -07:00
Cyrill Gorcunov
8bd1796ded x86: relocs ELF handling - use SELFMAG instead of numeric constant
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: mingo@elte.hu
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-04 20:04:45 +02:00
Tim Gardner
8c4dd60682 edd: add default mode CONFIG_EDD_OFF=n, override with edd={on,off}
Add a kernel parameter option to 'edd' to enable/disable BIOS Enhanced Disk
Drive Services.  CONFIG_EDD_OFF disables EDD while still compiling EDD into
the kernel.  Default behavior can be forced using 'edd=on' or 'edd=off' as
a kernel parameter.

[akpm@linux-foundation.org: fix kernel-parameters.txt]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Huang, Ying
8b664aa66e x86, boot: add linked list of struct setup_data
This patch adds a field of 64-bit physical pointer to NULL terminated
single linked list of struct setup_data to real-mode kernel
header. This is used as a more extensible boot parameters passing
mechanism.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26 21:34:42 +02:00
Matthew Wilcox
2cfed60cc2 Update .gitignore files
Add some autogenerated files to various .gitignore files

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25 12:27:32 -07:00
Yinghai Lu
4a9f54cfd2 x86: cleanup: change _end to end_before_pgt
cleanup: change the _end in compressed vmlinux_64.lds.

also change _heap to _ebss that is not needed.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:55 +02:00
Alexander van Heukelum
7c53976404 x86: cleanup boot-heap usage
The kernel decompressor wrapper uses memory located beyond the
end of the image. This might lead to hard to debug problems,
but even if it can be proven to be safe, it is at the very
least unclean. I don't see any advantages either, unless you
count it not being zeroed out as an advantage. This patch
moves the boot-heap area to the bss segment.

Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
WANG Cong
cf9b111c17 x86: remove pointless comments
Remove old comments that include the old arch/i386 directory.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Pavel Machek
e44b7b7525 x86: move suspend wakeup code to C
Move wakeup code to .c, so that video mode setting code can be shared
between boot and wakeup. Remove nasty assembly code in 64-bit case by
re-using trampoline code. Stack setup was fixed to clear high 16bits
of %esp, maybe that fixes some machines.

.c code sharing and morse code was done H. Peter Anvin, Sam Ravnborg
reviewed kbuild related stuff, and it seems okay to him. Rafael did
some cleanups.

[rjw:
* Made the patch stop breaking compilation on x86-32
* Added arch/x86/kernel/acpi/sleep.h
* Got rid of compiler warnings in arch/x86/kernel/acpi/sleep.c
* Fixed 32-bit compilation on x86-64 systems
* Added include/asm-x86/trampoline.h and fixed the non-SMP
  compilation on 64-bit x86
* Removed arch/x86/kernel/acpi/sleep_32.c which was not used
* Fixed some breakage caused by the integration of smpboot.c done
  under us in the meantime]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:37 +02:00
Alexander van Heukelum
03056c88cf x86: remove superfluous initialisation in boot code.
In arch/x86/boot/compressed/misc.c, the variable vidmem is
the only variable that ends up in de data segment. It's also
superfluous, because the first thing the code does is:

	if (RM_SCREEN_INFO.orig_video_mode == 7) {
		vidmem = (char *) 0xb0000;
		vidport = 0x3b4;
	} else {
		vidmem = (char *) 0xb8000;
		vidport = 0x3d4;
	}

This patch removes the initialisation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:36 +02:00
Paolo Ciarrocchi
7030760ae5 x86: coding style fixes to arch/x86/boot/cpucheck.c
Before:
   total: 30 errors, 0 warnings, 262 lines checked
After:
   total: 0 errors, 0 warnings, 262 lines checked

No code changed:

arch/x86/boot/cpucheck.o:

   text	   data	    bss	    dec	    hex	filename
    989	      0	     96	   1085	    43d	cpucheck.o.before
    989	      0	     96	   1085	    43d	cpucheck.o.after

md5:
   06634cfefb8438fa284ff903b4cafbce  cpucheck.o.before.asm
   06634cfefb8438fa284ff903b4cafbce  cpucheck.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:50 +02:00
Paolo Ciarrocchi
023196a3be x86: coding style fix to arch/x86/boot/pm.c
Before:
   total: 1 errors, 0 warnings, 178 lines checked
After:
   total: 0 errors, 0 warnings, 178 lines checked

No code changed:

arch/x86/boot/pm.o:

   text	   data	    bss	    dec	    hex	filename
    351	      0	      6	    357	    165	pm.o.before
    351	      0	      6	    357	    165	pm.o.after

md5:
   81de3616bceb29691bf835bb62a84ff1  pm.o.before.asm
   81de3616bceb29691bf835bb62a84ff1  pm.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Ingo Molnar
1180e01de5 x86: more cleanups in arch/x86/boot/compressed/misc.c
Before:
   total: 7 errors, 8 warnings, 471 lines checked
After:
   total: 5 errors, 5 warnings, 479 lines checked

( the rest cannot be eliminated due to zlib interface cruftiness. )

No code changed:

arch/x86/boot/compressed/misc.o:

   text	   data	    bss	    dec	    hex	filename
  10716	      8	   2152	  12876	   324c	misc.o.before
  10716	      8	   2152	  12876	   324c	misc.o.after

md5:
   2c20c903986a3c9bca44306c6646067e  misc.o.before.asm
   2c20c903986a3c9bca44306c6646067e  misc.o.after.asm

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Paolo Ciarrocchi
fd77c7cabd x86: coding style fixes to arch/x86/boot/compressed/misc.c
Fix lots of style errors and warnings.

Before:
   total: 58 errors, 9 warnings, 469 lines checked
After:
   total: 7 errors, 8 warnings, 471 lines checked

No code changed:

arch/x86/boot/compressed/misc.o:

   text	   data	    bss	    dec	    hex	filename
  10716	      8	   2152	  12876	   324c	misc.o.before
  10716	      8	   2152	  12876	   324c	misc.o.after

md5:
   2c20c903986a3c9bca44306c6646067e  misc.o.before.asm
   2c20c903986a3c9bca44306c6646067e  misc.o.after.asm

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Ian Campbell
87253d1b4f x86: boot protocol updates
Also update field names to simply payload_{offset,length} so as to not rule
out uncompressed images.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:48 +02:00
Ingo Molnar
52b387197b x86: bump image header to version 2.08.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Ian Campbell
7d6e737c8d x86: add a crc32 checksum to the kernel image.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Ian Campbell
099e137726 x86: use ELF format in compressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17 17:40:46 +02:00
Peter Korsgaard
1722770f13 x86-boot: don't request VBE2 information
The new x86 setup code (4fd06960f1) broke booting on an old P3/500MHz
with an onboard Voodoo3 of mine. After debugging it, it turned out
to be caused by the fact that the vesa probing now asks for VBE2 data.

Disassembing the video BIOS shows that it overflows the vesa_general_info
structure when VBE2 data is requested because the source addresses for the
information strings which get strcpy'ed to the buffer lie outside the 32K
BIOS code (and hence contain long sequences of 0xff's).

E.G.:

get_vbe_controller_info:
00002A9C  60                pushaw
00002A9D  1E                push ds
00002A9E  0E                push cs
00002A9F  1F                pop ds
00002AA0  2BC9              sub cx,cx
00002AA2  6626813D56424532  cmp dword [es:di],0x32454256 ; "VBE2"
00002AAA  7501              jnz .1
00002AAC  41                inc cx
.1:
00002AAD  51                push cx
00002AAE  B91400            mov cx,0x14
00002AB1  BED47F            mov si, controller_header
00002AB4  57                push di
00002AB5  F3A4              rep movsb ; copy vbe1.2 header

00002AB7  B9EC00            mov cx,0xec
00002ABA  2AC0              sub al,al
00002ABC  F3AA              rep stosb ; zero pad remainder

00002ABE  5F                pop di
00002ABF  E8EB0D            call word get_memory
00002AC2  C1E002            shl ax,0x2
00002AC5  26894512          mov [es:di+0x12],ax ; total memory
00002AC9  26C745040003      mov word [es:di+0x4],0x300 ; VBE version
00002ACF  268C4D08          mov [es:di+0x8],cs
00002AD3  268C4D10          mov [es:di+0x10],cs
00002AD7  59                pop cx
00002AD8  E361              jcxz .done ; VBE2 requested?
00002ADA  8D9D0001          lea bx,[di+0x100]
00002ADE  53                push bx
00002ADF  87DF              xchg bx,di ; di now points to 2nd half
00002AE1  26C747140001      mov word [es:bx+0x14],0x100 ; sw rev

00002AE7  26897F06          mov [es:bx+0x6],di		; oem string
00002AEB  268C4708          mov [es:bx+0x8],es
00002AEF  BE5280            mov si,0x8052 ; oem string
00002AF2  E87A1B            call word strcpy

00002AF5  26897F0E          mov [es:bx+0xe],di ; video mode list
00002AF9  268C4710          mov [es:bx+0x10],es
00002AFD  B91E00            mov cx,0x1e
00002B00  BEE87F            mov si,vidmodes
00002B03  F3A5              rep movsw

00002B05  26897F16          mov [es:bx+0x16],di ; oem vendor
00002B09  268C4718          mov [es:bx+0x18],es
00002B0D  BE2480            mov si,0x8024 ; oem vendor
00002B10  E85C1B            call word strcpy

00002B13  26897F1A          mov [es:bx+0x1a],di ; oem product
00002B17  268C471C          mov [es:bx+0x1c],es
00002B1B  BE3880            mov si,0x8038 ; oem product
00002B1E  E84E1B            call word strcpy

00002B21  26897F1E          mov [es:bx+0x1e],di ; oem product rev
00002B25  268C4720          mov [es:bx+0x20],es
00002B29  BE4580            mov si,0x8045 ; oem product rev
00002B2C  E8401B            call word strcpy

00002B2F  58                pop ax
00002B30  B90001            mov cx,0x100
00002B33  2BCF              sub cx,di
00002B35  03C8              add cx,ax
00002B37  2AC0              sub al,al
00002B39  F3AA              rep stosb ; zero pad
.done:
00002B3B  1F                pop ds
00002B3C  61                popaw
00002B3D  B84F00            mov ax,0x4f
00002B40  C3                ret

(The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin
if interested).

The old setup code didn't ask for VBE2 info, and the new code doesn't
actually do anything with the extra information, so the fix is to simply
not request it. Other BIOS'es might have the same problem.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 16:39:14 +01:00
H. Peter Anvin
829157be59 x86: handle BIOSes which terminate e820 with CF=1 and no SMAP
The proper way to terminate the e820 chain is with %ebx == 0 on the
last legitimate memory block.  However, several BIOSes don't do that
and instead return error (CF = 1) when trying to read off the end of
the list.  For this error return, %eax doesn't necessarily return the
SMAP signature -- correctly so, since %ah should contain an error code
in this case.

To deal with some particularly broken BIOSes, we clear the entire e820
chain if the SMAP signature is missing in the middle, indicating a
plain insane e820 implementation.  However, we need to make the test
for CF = 1 before the SMAP check.

This fixes at least one HP laptop (nc6400) for which none of the
memory-probing methods (e820, e801, 88) functioned fully according to
spec.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26 12:55:52 +01:00
Linus Torvalds
0b6ca82af8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
  x86: cpa, strict range check in try_preserve_large_page()
  x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit
  x86: cpa, use page pool
  x86: introduce page pool in cpa
  x86: DEBUG_PAGEALLOC: enable after mem_init()
  brk: help text typo fix
  lguest: accept guest _PAGE_PWT page table entries
  x86 PM: update stale comments
  x86 PM: consolidate suspend and hibernation code
  x86 PM: rename 32-bit files in arch/x86/power
  x86 PM: move 64-bit hibernation files to arch/x86/power
  x86: trivial printk optimizations
  x86: fix early_ioremap pagetable ops
  x86: construct 32-bit boot time page tables in native format.
  x86, core: remove CONFIG_FORCED_INLINING
  x86: avoid unused variable warning in mm/init_64.c
  x86: fixup more paravirt fallout
  brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:
  x86: fix sparse warnings in acpi/bus.c
  x86: fix sparse warning in topology.c
  ...
2008-02-09 23:29:57 -08:00
S.Çağlar Onur
3b35632973 Update arch/x86/boot/.gitignore with new auto-generated files
Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09 23:27:01 -08:00
Denys Vlasenko
9b706aee7d x86: trivial printk optimizations
In arch/x86/boot/printf.c gets rid of unused tail of digits: const char
*digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f
only)

Uses smaller/faster lowercasing (by ORing with 0x20)
if we know that we work on numbers/digits. Makes
strtoul smaller, and also we are getting rid of

  static const char small_digits[] = "0123456789abcdefx";
  static const char large_digits[] = "0123456789ABCDEFX";

since this works equally well:

  static const char digits[16] = "0123456789ABCDEF";

Size savings:

$ size vmlinux.org vmlinux
   text    data     bss     dec     hex filename
 877320  112252   90112 1079684  107984 vmlinux.org
 877048  112252   90112 1079412  107874 vmlinux

It may be also a tiny bit faster because code has less
branches now, but I doubt it is measurable.

[ hugh@veritas.com: uppercase pointers fix ]

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Andi Kleen
31422c51e0 x86: rename LARGE_PAGE_SIZE to PMD_PAGE_SIZE
Fix up all users.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:08 +01:00
H. Peter Anvin
f0be6c6a69 x86 setup: print missing CPU features in cleartext
Instead of obscure numbers, print the list of missing CPU features in
cleartext.  To conserve space, use a host program (mkcpustr.c) to
produce a compact list of mandatory features only.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-04 16:48:00 +01:00
Ian Campbell
1622ac23bd x86: define OBJCOPYFLAGS explicitly for each target.
Do this rather than defining a global version and overriding it in
almost all cases in order to make subsequent patches simpler.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-04 16:47:56 +01:00
Yinghai Lu
32ed937d05 x86: fix comments in vmlinux_64.lds
for bzImage, the vmlinux_64.lds still have s32 bit code, and startup_32
should be 0. fix the comment.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-01 17:49:41 +01:00
Ian Campbell
778cb929ad x86: unify arch/x86/boot/compressed/misc_??.c
Remainder of unification can occur inplace.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
4c83d6536e x86: unify variable names in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
8751f97486 x86: unify headers in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
818a08f8a5 x86: unify whitespace and comments in arch/x86/boot/compressed/misc_??.c
size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
6b3c0426a7 x86: unify strings in arch/x86/boot/compressed/misc_??.c
There seems to be a preference for the 64 bit version so use that on 32 bit and
drop the stray leading "."

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00
Ian Campbell
f18c0e7920 x86: unify arch/x86/boot/compressed/vmlinux_??.scr
The files are now identical so merge them.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:38 +01:00