Commit Graph

145 Commits

Author SHA1 Message Date
Guennadi Liakhovetski
5296b56d1b i.MX31: Image Processing Unit DMA and IRQ drivers
i.MX3x SoCs contain an Image Processing Unit, consisting of a Control
Module (CM), Display Interface (DI), Synchronous Display Controller (SDC),
Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter
(PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC).
CM contains, among other blocks, an Interrupt Generator (IG) and a Clock
and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are
supported over dmaengine and irq-chip APIs respectively.

IDMAC is a specialised DMA controller, its DMA channels cannot be used for
general-purpose operations, even though it might be possible to configure
a memory-to-memory channel for memcpy operation. This driver will not work
with generic dmaengine clients, clients, wishing to use it must use
respective wrapper structures, they also must specify which channels they
require, as channels are hard-wired to specific IPU functions.

Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-19 15:36:21 -07:00
Dan Williams
83436a0560 dmaengine: kill some dubious WARN_ONCEs
dma_find_channel and dma_issue_pending_all are good places to warn about
improper api usage.  However, warning correctly means synchronizing with
dma_list_mutex, i.e. too much overhead for these fast-path calls.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-19 14:39:10 -07:00
Peter Korsgaard
169d5f6637 fsldma: print correct IRQ on mpc83xx
The mpc83xx variant uses a shared IRQ for all channels, so the individual
channel nodes don't have an interrupt property. Fix the code to print the
controller IRQ instead if there isn't any for the channel.

Acked-by: Timur Tabi <timur@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-15 23:50:22 -07:00
Peter Korsgaard
6782dfe44a fsldma: check for NO_IRQ in fsl_dma_chan_remove()
There's no per-channel IRQ on mpc83xx, so only call free_irq if we have one.

Acked-by: Timur Tabi <timur@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-14 22:32:58 -07:00
Atsushi Nemoto
d86be86e9a dmatest: Use custom map/unmap for destination buffer
The dmatest driver should use DMA_BIDIRECTIONAL on the destination buffer
to ensure that the poison values are written to RAM and not just written
to cache and discarded.

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-13 09:22:20 -07:00
Dan Williams
6527de6d6d fsldma: use a valid 'device' for dma_pool_create
The dmaengine sysfs implementation was fixed to support proper
lifetime rules which means that the current:

new_fsl_chan->dev = &new_fsl_chan->common.dev->device;

...retrieves a NULL pointer because new_fsl_chan->common.dev has not
been allocated at this point.  So, set new_fsl_chan->dev to a valid
device.

Cc: Li Yang <leoli@freescale.com>
Cc: Zhang Wei <zw@zh-kernel.org>
Reported-by: Ira Snyder <iws@ovro.caltech.edu>
Tested-by: Ira Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12 15:20:42 -07:00
Yuri Tikhonov
dd59b8537f dmaengine: fix dependency chaining
In dmaengine we track the dependencies between the descriptors
using the 'next' pointers of the structure. These pointers are
set to NULL as soon as the corresponding descriptor has been
submitted to the channel (in dma_run_dependencies()).

But, the first 'next' in chain is still remaining set, regardless
the fact, that tx->next has been already submitted. This may lead to
multiple submissions of the same descriptor. This patch fixes this.

Actually, some previous implementation of the xxx_run_dependencies()
function already had this fix in place. The fdb..0eaf3 commit, beside the
correct things, broke this.

Cc: <stable@kernel.org>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-12 15:19:29 -07:00
Dan Williams
b9bdcbba01 ioat: fix self test for multi-channel case
In the multiple device case we need to re-arm the completion and protect
against concurrent self-tests.  The printk from the test callback is
removed as it can arbitrarily delay completion of the test.

Cc: <stable@kernel.org>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:22 -07:00
Dan Williams
652afc27b2 dmaengine: bump initcall level to arch_initcall
There are dmaengine users that would like to register dma devices at
subsys_initcall time to ensure channels are available by device_initcall
time.

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:22 -07:00
Dan Williams
e2346677af dmaengine: advertise all channels on a device to dma_filter_fn
Allow dma_filter_fn routines to disambiguate multiple channels on a device
rather than assuming that all channels on a device are equal.

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:21 -07:00
Dan Williams
864498aaa9 dmaengine: use idr for registering dma device numbers
This brings some predictability to dma device numbers, i.e. an rmmod/insmod
cycle may now result in /sys/class/dma/dma0chan0 being restored rather than
/sys/class/dma/dma1chan0 appearing.

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:21 -07:00
Dan Williams
41d5e59c12 dmaengine: add a release for dma class devices and dependent infrastructure
Resolves:
WARNING: at drivers/base/core.c:122 device_release+0x4d/0x52()
Device 'dma0chan0' does not have a release() function, it is broken and must be fixed.

The dma_chan_dev object is introduced to gear-match sysfs kobject and
dmaengine channel lifetimes.  When a channel is removed access to the
sysfs entries return -ENODEV until the kobject can be released.

The bulk of the change is updates to existing code to handle the extra
layer of indirection between a dma_chan and its struct device.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:21 -07:00
Dan Williams
4fac7fa57c ioat: do not perform removal actions at shutdown
Unregistering services should only happen at "remove" time.  This prevents
the device from being unregistered while dmaengine clients are still
active.  Also, the comment on ioat_remove is stale since removal is prevented
while a channel may be in use.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:20 -07:00
Dan Williams
630738b9a5 iop-adma: enable module removal
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:20 -07:00
Dan Williams
0d603f611d iop-adma: kill debug BUG_ON
This BUG_ON caught problems in early development but now it is in the
way as it invalidly triggers when trying to remove the module.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:20 -07:00
Dan Williams
f38822033d iop-adma: let devm do its job, don't duplicate free
No need to free stuff that the devm infrastructure will take care of...

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:19 -07:00
Dan Williams
7dd6025101 dmaengine: kill enum dma_state_client
DMA_NAK is now useless.  We can just use a bool instead.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:19 -07:00
Dan Williams
f27c580c36 dmaengine: remove 'bigref' infrastructure
Reference counting is done at the module level so clients need not worry
that a channel will leave while they are actively using dmaengine.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:18 -07:00
Dan Williams
aa1e6f1a38 dmaengine: kill struct dma_client and supporting infrastructure
All users have been converted to either the general-purpose allocator,
dma_find_channel, or dma_request_channel.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:17 -07:00
Dan Williams
209b84a88f dmaengine: replace dma_async_client_register with dmaengine_get
Now that clients no longer need to be notified of channel arrival
dma_async_client_register can simply increment the dmaengine_ref_count.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:17 -07:00
Dan Williams
74465b4ff9 atmel-mci: convert to dma_request_channel and down-level dma_slave
dma_request_channel provides an exclusive channel, so we no longer need to
pass slave data through dmaengine.

Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:16 -07:00
Dan Williams
33df8ca068 dmatest: convert to dma_request_channel
Replace the client registration infrastructure with a custom loop to
poll for channels.  Once dma_request_channel returns NULL stop asking
for channels.  A userspace side effect of this change if that loading
the dmatest module before loading a dma driver will result in no
channels being found, previously dmatest would get a callback.  To
facilitate testing in the built-in case dmatest_init is marked as a
late_initcall.  Another side effect is that channels under test can not
be used for any other purpose.

Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:15 -07:00
Dan Williams
59b5ec2144 dmaengine: introduce dma_request_channel and private channels
This interface is primarily for device-to-memory clients which need to
search for dma channels with platform-specific characteristics.  The
prototype is:

struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
                                     dma_filter_fn filter_fn,
                                     void *filter_param);

When the optional 'filter_fn' parameter is set to NULL
dma_request_channel simply returns the first channel that satisfies the
capability mask.  Otherwise, when the mask parameter is insufficient for
specifying the necessary channel, the filter_fn routine can be used to
disposition the available channels in the system. The filter_fn routine
is called once for each free channel in the system.  Upon seeing a
suitable channel filter_fn returns DMA_ACK which flags that channel to
be the return value from dma_request_channel.  A channel allocated via
this interface is exclusive to the caller, until dma_release_channel()
is called.

To ensure that all channels are not consumed by the general-purpose
allocator the DMA_PRIVATE capability is provided to exclude a dma_device
from general-purpose (memory-to-memory) consideration.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:15 -07:00
Dan Williams
2ba05622b8 dmaengine: provide a common 'issue_pending_all' implementation
async_tx and net_dma each have open-coded versions of issue_pending_all,
so provide a common routine in dmaengine.

The implementation needs to walk the global device list, so implement
rcu to allow dma_issue_pending_all to run lockless.  Clients protect
themselves from channel removal events by holding a dmaengine reference.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
bec085134e dmaengine: centralize channel allocation, introduce dma_find_channel
Allowing multiple clients to each define their own channel allocation
scheme quickly leads to a pathological situation.  For memory-to-memory
offload all clients can share a central allocator.

This simply moves the existing async_tx allocator to dmaengine with
minimal fixups:
* async_tx.c:get_chan_ref_by_cap --> dmaengine.c:nth_chan
* async_tx.c:async_tx_rebalance --> dmaengine.c:dma_channel_rebalance
* split out common code from async_tx.c:__async_tx_find_channel -->
  dma_find_channel

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
6f49a57aa5 dmaengine: up-level reference counting to the module level
Simply, if a client wants any dmaengine channel then prevent all dmaengine
modules from being removed.  Once the clients are done re-enable module
removal.

Why?, beyond reducing complication:
1/ Tracking reference counts per-transaction in an efficient manner, as
   is currently done, requires a complicated scheme to avoid cache-line
   bouncing effects.
2/ Per-transaction ref-counting gives the false impression that a
   dma-driver can be gracefully removed ahead of its user (net, md, or
   dma-slave)
3/ None of the in-tree dma-drivers talk to hot pluggable hardware, but
   if such an engine were built one day we still would not need to notify
   clients of remove events.  The driver can simply return NULL to a
   ->prep() request, something that is much easier for a client to handle.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-06 11:38:14 -07:00
Dan Williams
07f2211e4f dmaengine: remove dependency on async_tx
async_tx.ko is a consumer of dma channels.  A circular dependency arises
if modules in drivers/dma rely on common code in async_tx.ko.  It
prevents either module from being unloaded.

Move dma_wait_for_async_tx and async_tx_run_dependencies to dmaeninge.o
where they should have been from the beginning.

Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-01-05 18:10:19 -07:00
Dan Williams
a06d568f7c async_xor: dma_map destination DMA_BIDIRECTIONAL
Mapping the destination multiple times is a misuse of the dma-api.
Since the destination may be reused as a source, ensure that it is only
mapped once and that it is mapped bidirectionally.  This appears to add
ugliness on the unmap side in that it always reads back the destination
address from the descriptor, but gcc can determine that dma_unmap is a
nop and not emit the code that calculates its arguments.

Cc: <stable@kernel.org>
Cc: Saeed Bishara <saeed@marvell.com>
Acked-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-08 13:46:00 -07:00
Dan Williams
b0b42b16ff dmaengine: protect 'id' from concurrent registrations
There is a possibility to have two devices registered with the same id.

Cc: <stable@kernel.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-03 17:25:36 -07:00
Dan Williams
532d3b1f86 ioat: wait for self-test completion
As part of the ioat_dma self-test it performs a printk from a completion
callback.  Depending on the system console configuration this output can
take longer than a millisecond causing the self-test to fail.  Introduce a
completion with a generous timeout to mitigate this failure.

Cc: <stable@kernel.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-12-03 17:16:55 -07:00
Kay Sievers
06190d8415 dmaengine: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-11 13:12:33 -07:00
Dan Williams
65e503814d iop-adma: use iop_paranoia() for debug BUG_ONs
Now that the critical read back to flush the next descriptor address is
fixed we can downgrade some BUG_ONs that need only be enabled when testing
changes to the driver.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-11 13:12:33 -07:00
Dan Williams
137cb55c6d iop-adma: add a dummy read to flush next descriptor update
The current dummy read references the wrong address allowing the next
descriptor address update to linger in the store buffer and get passed
by an 'append' event.

This issue was uncovered by the change from strongly-ordered to device
memory for the adma registers.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-11-11 13:12:33 -07:00
Maciej Sosnowski
12ccea24e3 [3/4] I/OAT: fix async_tx.callback checking
async_tx.callback should be checked for the first
not the last descriptor in the chain.

Cc: <stable@kernel.org>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 15:01:00 -08:00
Maciej Sosnowski
c2c0b4c543 [2/4] I/OAT: fix dma_pin_iovec_pages() error handling
Error handling needs to be modified in dma_pin_iovec_pages().
It should return NULL instead of ERR_PTR
(pinned_list is checked for NULL in tcp_recvmsg() to determine
if iovec pages have been successfully pinned down).
In case of error for the first iovec,
local_list->nr_iovecs needs to be initialized.

Cc: <stable@kernel.org>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 15:00:56 -08:00
Maciej Sosnowski
c3d4f44f50 [1/4] I/OAT: fix channel resources free for not allocated channels
If the ioatdma driver is loaded but not used it does not allocate descriptors.
Before it frees channel resources it should first be sure
that they have been previously allocated.

Cc: <stable@kernel.org>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Tested-by: Tom Picard <tom.s.picard@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10 15:00:51 -08:00
Len Brown
9fb3c5ca3d Merge branch 'i7300_idle' into release 2008-10-25 04:07:44 -04:00
Venki Pallipadi
f371be6352 i7300_idle: Fix compile warning CONFIG_I7300_IDLE_IOAT_CHANNEL not defined
When I7300_idle driver is not configured, there is a compile time
warning about IDLE_IOAT_CHANNEL not defined. Fix it.

Reported-by: Suresh Siddha <suresh.b.siddha@intel.com>
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24 12:59:47 -04:00
Venki Pallipadi
3ad0b02e4c i7300_idle: Disable ioat channel only on platforms where ile driver can load
Based on input from Andi Kleen:
share the platform detection code with ioat_dma and disable the channel in
dma engine only for specific platforms.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24 12:54:18 -04:00
Len Brown
057316cc6a Merge branch 'linus' into test
Conflicts:
	MAINTAINERS
	arch/x86/kernel/acpi/boot.c
	arch/x86/kernel/acpi/sleep.c
	drivers/acpi/Kconfig
	drivers/pnp/Makefile
	drivers/pnp/quirks.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23 00:11:07 -04:00
Andy Henroid
27471fdb32 i7300_idle driver v1.55
The Intel 7300 Memory Controller supports dynamic throttling of memory which can
be used to save power when system is idle. This driver does the memory
throttling when all CPUs are idle on such a system.

Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet
for the config space description.

Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
2008-10-21 23:58:41 -04:00
Linus Torvalds
b91385236c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  fsldma: allow Freescale Elo DMA driver to be compiled as a module
  fsldma: remove internal self-test from Freescale Elo DMA driver
  drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL
  dmatest: properly handle duplicate DMA channels
  drivers/dma/ioat_dma.c: drop code after return
  async_tx: make async_tx_run_dependencies() easier to read
2008-10-20 12:54:30 -07:00
Haavard Skinnemoen
7fe7b2f4ec dw_dmac: fix copy/paste bug in tasklet
The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is
obviously wrong, and could theoretically cause the driver to hang.

Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03 18:22:18 -07:00
Timur Tabi
77cd62e808 fsldma: allow Freescale Elo DMA driver to be compiled as a module
Modify the Freescale Elo / Elo Plus DMA driver so that it can be compiled as
a module.

The primary change is to stop treating the DMA controller as a bus, and the
DMA channels as devices on the bus.  This is because the Open Firmware (OF)
kernel code does not allow busses to be removed, so although we can call
of_platform_bus_probe() to probe the DMA channels, there is no
of_platform_bus_remove().  Instead, the DMA channels are manually probed,
similar to what fsl_elbc_nand.c does.

Cc: Scott Wood <scottwood@freescale.com>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-26 17:00:11 -07:00
Timur Tabi
59f647c25a fsldma: remove internal self-test from Freescale Elo DMA driver
The Freescale Elo DMA driver runs an internal self-test before registering
the channels with the DMA engine.  This self-test has a fundemental flaw in
that it calls the DMA engine's callback functions directly before the
registration.  However, the registration initializes some variables that the
callback functions uses, namely the device struct.

The code works today because there are two device structs: the one created
by the DMA engine, and one created by the Open Firmware (OF) subsystem.  The
self-test currently uses the device struct created by OF.  However, in the
future, some of the device structs created by OF will be eliminated.
This means that the self-test will only have access to the device struct
created by the DMA engine.  But this device struct isn't initialized when
the self-test runs, and this causes a kernel panic.

Since there is already a DMA test module (dmatest), the internal self-test
code is not useful anyway.  It is extremely unlikely that the test will fail
in normal usage.  It may have been helpful during development, but not any more.

Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-23 15:55:56 -07:00
Andrew Morton
6fdb8bd471 drivers/dma/dmatest.c: switch a GFP_ATOMIC to GFP_KERNEL
It was needlessly using the unreliable GFP_ATOMIC.

Cc: Timur Tabi <timur@freescale.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-19 04:16:23 -07:00
Timur Tabi
6b3141962d dmatest: properly handle duplicate DMA channels
Update the the dmatest driver so that it handles duplicate DMA channels
properly.

When a DMA client is notified of an available DMA channel, it must check if it
has already allocated resources for that channel.  If so, it should return
DMA_DUP.  This can happen, for example, if a DMA driver calls
dma_async_device_register() more than once.

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-19 04:16:19 -07:00
Julia Lawall
89f72a0633 drivers/dma/ioat_dma.c: drop code after return
The break after the return serves no purpose.

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-09-13 20:05:34 -07:00
Russell King
492c71dd54 Merge branch 'for-rmk' of git://git.marvell.com/orion 2008-08-09 18:03:13 +01:00
Lennert Buytenhek
6f088f1d21 [ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat
This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09 13:44:58 +02:00