Commit Graph

201 Commits

Author SHA1 Message Date
Ingo Molnar
0b849ee888 Merge branch 'x86' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent 2010-10-25 19:17:32 +02:00
Robert Richter
4cafc4b8d7 Merge branch 'oprofile/core' into oprofile/x86
Conflicts:
	arch/x86/oprofile/op_model_amd.c

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-25 16:58:34 +02:00
Ingo Molnar
2c78ffeca9 x86/oprofile: Fix uninitialized variable use in debug printk
Stephen Rothwell reported this build warning:

  arch/x86/oprofile/op_model_amd.c: In function 'ibs_eilvt_valid':
  arch/x86/oprofile/op_model_amd.c:289: warning: 'offset' may be used uninitialized in this function

And correctly observed that indeed the variable is used uninitialized in
this function. The result of this bug can be a debug printk with a bogus
value.

Also fix a few more small details that made this function hard to read
and which probably contributed to the bug being introduced to begin with:

 - Use more symmetric error conditions

 - Remove the !0 obfuscation

 - Add newlines to the printk output

 - Remove bogus linebreaks in printk strings and elsewhere

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20101025115736.41d51abe.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-25 08:46:20 +02:00
Linus Torvalds
4a60cfa945 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
  apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
  apic, x86: Check if EILVT APIC registers are available (AMD only)
  x86: ioapic: Call free_irte only if interrupt remapping enabled
  arm: Use ARCH_IRQ_INIT_FLAGS
  genirq, ARM: Fix boot on ARM platforms
  genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
  x86: Switch sparse_irq allocations to GFP_KERNEL
  genirq: Switch sparse_irq allocator to GFP_KERNEL
  genirq: Make sparse_lock a mutex
  x86: lguest: Use new irq allocator
  genirq: Remove the now unused sparse irq leftovers
  genirq: Sanitize dynamic irq handling
  genirq: Remove arch_init_chip_data()
  x86: xen: Sanitise sparse_irq handling
  x86: Use sane enumeration
  x86: uv: Clean up the direct access to irq_desc
  x86: Make io_apic.c local functions static
  genirq: Remove irq_2_iommu
  x86: Speed up the irq_remapped check in hot pathes
  intr_remap: Simplify the code further
  ...

Fix up trivial conflicts in arch/x86/Kconfig
2010-10-21 14:11:46 -07:00
Robert Richter
27afdf2008 apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
We want the BIOS to setup the EILVT APIC registers. The offsets
were hardcoded and BIOS settings were overwritten by the OS.
Now, the subsystems for MCE threshold and IBS determine the LVT
offset from the registers the BIOS has setup. If the BIOS setup
is buggy on a family 10h system, a workaround enables IBS. If
the OS determines an invalid register setup, a "[Firmware Bug]:
" error message is reported.

We need this change also for upcomming cpu families.

Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1286360874-1471-3-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-20 04:42:13 +02:00
Robert Richter
b47fad3bfb oprofile, x86: Add support for IBS periodic op counter extension
The count value for IBS op sampling has been extended by 7 bits. The
feature is reflected in bit 6 (OpCntExt) of the IBS capability
register (CPUID Fn8000_001B_EAX).

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:43 +02:00
Robert Richter
25da695047 oprofile, x86: Add support for IBS branch target address reporting
This patch adds support for IBS branch target address reporting. A new
MSR (MSRC001_103B IBS Branch Target Address) has been added that
provides the logical address in canonical form for the branch
target. The size of the IBS sample that is transferred to the userland
has been increased.

For backward compatibility, the userland daemon must explicit enable
the feature by writing to the oprofilefs file

 ibs_op/branch_target

After enabling branch target address reporting, the userland daemon
must handle the extended size of the IBS sample.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:42 +02:00
Robert Richter
53b39e9480 oprofile, x86: Introduce struct ibs_state
This patch introduces struct ibs_state that will extended by additinal
members in follow-on patches.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:41 +02:00
Robert Richter
fc889aa23f oprofile, x86: Remove duplicate check for IBS_CAPS_OPCNT
Since oprofile is setting up ibs_op/dispatched_ops in the fs only if
the feature is available, its corresponding variable
ibs_config.dispatched_ops is only set, if the feature is
available. Thus the check is duplicate and can be removed.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:41 +02:00
Robert Richter
4ac945f002 oprofile, x86: Check IBS capability bits 1 and 2
There are IBS CPUID feature flags in CPUID Fn8000_001B to detect if
the cpu supports IBS fetch sampling (FetchSam) and/or IBS execution
sampling (OpSam). This patch adds checks if the both features are
available.

Spec:

 http://support.amd.com/us/Processor_TechDocs/31116.pdf

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:40 +02:00
Robert Richter
e63414740e oprofile, x86: Add support for AMD family 14h
This patch adds support for AMD family 14h (Ontario/Zacate) cpus.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:39 +02:00
Robert Richter
3acbf0849b oprofile, x86: Add support for AMD family 12h
This patch adds support for AMD family 12h (Llano) cpus.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-15 12:50:39 +02:00
Robert Richter
5140434d5f oprofile, x86: Simplify init/exit functions
Now, that we only call the exit function if init succeeds with commit:

 979048e oprofile: don't call arch exit code from init code on failure

we can simplify the x86 init/exit functions too. Variable using_nmi
becomes obsolete.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01 17:05:47 +02:00
Jiri Olsa
f6dedecc37 oprofile, x86: Adding backtrace dump for 32bit process in compat mode
This patch implements the oprofile backtrace  generation for 32 bit
applications running in the 64bit environment (compat mode).

With this change it's possible to get backtrace for 32bits applications
under the 64bits environment using oprofile's callgraph options.

opcontrol --setup -c ...
opreport -l -cg ...

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01 16:07:18 +02:00
Jiri Olsa
40c6b3cb64 oprofile, x86: Using struct stack_frame for 64bit processes dump
Removing unnecessary struct frame_head and replacing it with
struct stack_frame.

The struct stack_frame is already defined and used in other places
in kernel, so there's no reason to define new structure.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-10-01 16:07:09 +02:00
Jiri Olsa
bb7ab785ad oprofile: Add Support for Intel CPU Family 6 / Model 29
This patch adds CPU type detection for dunnington processor (Family 6
/ Model 29) to be identified as core 2 family cpu type (wikipedia
source).

I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as
model 29, and it runs without an issue.

Spec:

 http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-21 12:22:48 +02:00
Patrick Simmons
c33f543d32 oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)
This patch adds CPU type detection for the Intel Celeron 540, which is
part of the Core 2 family according to Wikipedia; the family and ID pair
is absent from the Volume 3B table referenced in the source code
comments.  I have tested this patch on an Intel Celeron 540 machine
reporting itself as Family 6 Model 22, and OProfile runs on the machine
without issue.

Spec:

 http://download.intel.com/design/mobile/SPECUPDT/317667.pdf

Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-16 12:35:56 +02:00
Robert Richter
269f45c250 oprofile, x86: fix init_sysfs() function stub
The use of the return value of init_sysfs() with commit

 10f0412 oprofile, x86: fix init_sysfs error handling

discovered the following build error for !CONFIG_PM:

 .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’:
 .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’
 make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1
 make[1]: *** [arch/x86/oprofile] Error 2

This patch fixes this.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-09-01 21:23:01 +02:00
Robert Richter
10f0412f57 oprofile, x86: fix init_sysfs error handling
On failure init_sysfs() might not properly free resources. The error
code of the function is not checked. And, when reinitializing the exit
function might be called twice. This patch fixes all this.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-31 10:26:26 +02:00
Josh Hunt
a7c55cbee0 oprofile: add support for Intel processor model 30
Newer Intel processors identifying themselves as model 30 are not recognized by
oprofile.

<cpuinfo snippet>
model           : 30
model name      : Intel(R) Xeon(R) CPU           X3470  @ 2.93GHz
</cpuinfo snippet>

Running oprofile on these machines gives the following:
+ opcontrol --init
+ opcontrol --list-events
oprofile: available events for CPU type "Intel Architectural Perfmon"

See Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3B (Document 253669) Chapter 18 for architectural perfmon events
This is a limited set of fallback events because oprofile doesn't know your CPU
CPU_CLK_UNHALTED: (counter: all)
        Clock cycles when not halted (min count: 6000)
INST_RETIRED: (counter: all)
        number of instructions retired (min count: 6000)
LLC_MISSES: (counter: all)
        Last level cache demand requests from this core that missed the LLC
(min count: 6000)
        Unit masks (default 0x41)
        ----------
        0x41: No unit mask
LLC_REFS: (counter: all)
        Last level cache demand requests from this core (min count: 6000)
        Unit masks (default 0x4f)
        ----------
        0x4f: No unit mask
BR_MISS_PRED_RETIRED: (counter: all)
        number of mispredicted branches retired (precise) (min count: 500)
+ opcontrol --shutdown

Tested using oprofile 0.9.6.

Signed-off-by: Josh Hunt <johunt@akamai.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-05 12:17:38 +02:00
Robert Richter
d8a382d266 Merge remote branch 'tip/perf/urgent' into oprofile/urgent 2010-06-04 11:33:10 +02:00
Linus Torvalds
4d7b4ac22f Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
  perf tools: Add mode to build without newt support
  perf symbols: symbol inconsistency message should be done only at verbose=1
  perf tui: Add explicit -lslang option
  perf options: Type check all the remaining OPT_ variants
  perf options: Type check OPT_BOOLEAN and fix the offenders
  perf options: Check v type in OPT_U?INTEGER
  perf options: Introduce OPT_UINTEGER
  perf tui: Add workaround for slang < 2.1.4
  perf record: Fix bug mismatch with -c option definition
  perf options: Introduce OPT_U64
  perf tui: Add help window to show key associations
  perf tui: Make <- exit menus too
  perf newt: Add single key shortcuts for zoom into DSO and threads
  perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
  perf newt: Fix the 'A'/'a' shortcut for annotate
  perf newt: Make <- exit the ui_browser
  x86, perf: P4 PMU - fix counters management logic
  perf newt: Make <- zoom out filters
  perf report: Report number of events, not samples
  perf hist: Clarify events_stats fields usage
  ...

Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
2010-05-18 08:19:03 -07:00
John Villalovos
45c34e05c4 Oprofile: Change CPUIDS from decimal to hex, and add some comments
Back when the patch was submitted for "Add Xeon 7500 series support to
oprofile", Robert Richter had asked for a followon patch that
converted all the CPU ID values to hex.

I have done that here for the "i386/core_i7" and "i386/atom" class
processors in the ppro_init() function and also added some comments on
where to find documentation on the Intel processors.

Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-10 15:08:33 +02:00
Robert Richter
bae663bc63 oprofile/x86: make AMD IBS hotplug capable
Current IBS code is not hotplug capable. An offline cpu might not be
initialized or deinitialized properly. This patch fixes this by
removing on_each_cpu() functions. The IBS init/deinit code is executed
in the per-cpu functions model->setup_ctrs() and model->cpu_down()
which are also called by hotplug notifiers. model->cpu_down() replaces
model->exit() that became obsolete.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-06 15:11:15 +02:00
Robert Richter
3de668ee8d oprofile/x86: notify cpus only when daemon is running
This patch moves the cpu notifier registration from nmi_init() to
nmi_setup(). The corresponding unregistration function is now in
nmi_shutdown(). Thus, the hotplug code is only active, if the oprofile
daemon is running.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-06 13:15:39 +02:00
Robert Richter
d30d64c6da oprofile/x86: reordering some functions
Reordering some functions. Necessary for the next patch. No functional
changes.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:40:11 +02:00
Robert Richter
de65464973 oprofile/x86: stop disabled counters in nmi handler
This patch adds checks to the nmi handler. Now samples are only
generated and counters reenabled, if the counters are running.
Otherwise the counters are stopped, if oprofile is using the nmi. In
other cases it will ignore the nmi notification.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:39:38 +02:00
Robert Richter
6ae56b55bc oprofile/x86: protect cpu hotplug sections
This patch reworks oprofile cpu hotplug code as follows:

Introduce ctr_running variable to check, if counters are running or
not. The state must be known for taking a cpu on or offline and when
switching counters during counter multiplexing.

Protect on_each_cpu() sections with get_online_cpus()/put_online_cpu()
functions. This is necessary if notifiers or states are
modified. Within these sections the cpu mask may not change.

Switch only between counters in nmi_cpu_switch(), if counters are
running. Otherwise the switch may restart a counter though they are
disabled.

Add nmi_cpu_setup() and nmi_cpu_shutdown() to cpu hotplug code. The
function must also be called to avoid uninitialzed counter usage.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:37:56 +02:00
Robert Richter
216f3d9b4e oprofile/x86: remove CONFIG_SMP macros
CPU notifier register functions also exist if CONFIG_SMP is
disabled. This change is part of hotplug code rework and also
necessary for later patches.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:37:56 +02:00
Robert Richter
2623a1d55a oprofile/x86: fix uninitialized counter usage during cpu hotplug
This fixes a NULL pointer dereference that is triggered when taking a
cpu offline after oprofile was initialized, e.g.:

 $ opcontrol --init
 $ opcontrol --start-daemon
 $ opcontrol --shutdown
 $ opcontrol --deinit
 $ echo 0 > /sys/devices/system/cpu/cpu1/online

See the crash dump below. Though the counter has been disabled the cpu
notifier is still active and trying to use already freed counter data.

This fix is for linux-stable. To proper fix this, the hotplug code
must be rewritten. Thus I will leave a WARN_ON_ONCE() message with
this patch.

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/online
CPU 1
Modules linked in:

Pid: 0, comm: swapper Not tainted 2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16 Anaheim/Anaheim
RIP: 0010:[<ffffffff8132ad57>]  [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
RSP: 0018:ffff880001843f28  EFLAGS: 00010006
RAX: 0000000000000000 RBX: 0000000000000000 RCX: dead000000200200
RDX: ffff880001843f68 RSI: dead000000100100 RDI: 0000000000000000
RBP: ffff880001843f48 R08: 0000000000000000 R09: ffff880001843f08
R10: ffffffff8102c9a5 R11: ffff88000184ea80 R12: 0000000000000000
R13: ffff88000184f6c0 R14: 0000000000000000 R15: 0000000000000000
FS:  00007fec6a92e6f0(0000) GS:ffff880001840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 000000000163b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff88042fcd8000, task ffff88042fcd51d0)
Stack:
 ffff880001843f48 0000000000000001 ffff88042e9f7d38 ffff880001843f68
<0> ffff880001843f58 ffffffff8132a602 ffff880001843f98 ffffffff810521b3
<0> ffff880001843f68 ffff880001843f68 ffff880001843f88 ffff88042fcd9fd8
Call Trace:
 <IRQ>
 [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20
 <EOI>
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2
Code: 89 e5 41 55 49 89 fd 41 54 45 31 e4 53 31 db 48 83 ec 08 89 df e8 be f8 ff ff 48 98 48 83 3c c5 10 67 7a 81 00 74 1f 49 8b 45 08 <42> 8b 0c 20 0f 32 48 c1 e2 20 25 ff ff bf ff 48 09 d0 48 89 c2
RIP  [<ffffffff8132ad57>] op_amd_stop+0x2d/0x8e
 RSP <ffff880001843f28>
CR2: 0000000000000000
---[ end trace 679ac372d674b757 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G      D    2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16
Call Trace:
 <IRQ>  [<ffffffff813ebd6a>] panic+0x9e/0x10c
 [<ffffffff810474b0>] ? up+0x34/0x39
 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c
 [<ffffffff813eeff1>] oops_end+0x81/0x8e
 [<ffffffff8101efee>] no_context+0x1f3/0x202
 [<ffffffff8101f1b7>] __bad_area_nosemaphore+0x1ba/0x1e0
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff810264dc>] ? activate_task+0x42/0x53
 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284
 [<ffffffff8101f1eb>] bad_area_nosemaphore+0xe/0x10
 [<ffffffff813f0f3f>] do_page_fault+0x1c8/0x37c
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff813ee55f>] page_fault+0x1f/0x30
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e
 [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e
 [<ffffffff8132a602>] nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] call_function_single_interrupt+0x13/0x20
 <EOI>  [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] start_secondary+0x1ae/0x1b2
------------[ cut here ]------------
WARNING: at /local/rrichter/.source/linux/arch/x86/kernel/smp.c:118 native_smp_send_reschedule+0x27/0x53()
Hardware name: Anaheim
Modules linked in:
Pid: 0, comm: swapper Tainted: G      D    2.6.34-rc5-oprofile-x86_64-standard-00210-g8c00f06 #16
Call Trace:
 <IRQ>  [<ffffffff81017f32>] ? native_smp_send_reschedule+0x27/0x53
 [<ffffffff81030ee2>] warn_slowpath_common+0x77/0xa4
 [<ffffffff81030f1e>] warn_slowpath_null+0xf/0x11
 [<ffffffff81017f32>] native_smp_send_reschedule+0x27/0x53
 [<ffffffff8102634b>] resched_task+0x60/0x62
 [<ffffffff8102653a>] check_preempt_curr_idle+0x10/0x12
 [<ffffffff8102c8ea>] try_to_wake_up+0x1f5/0x284
 [<ffffffff8102c986>] default_wake_function+0xd/0xf
 [<ffffffff810a110d>] pollwake+0x57/0x5a
 [<ffffffff8102c979>] ? default_wake_function+0x0/0xf
 [<ffffffff81026be5>] __wake_up_common+0x46/0x75
 [<ffffffff81026ed0>] __wake_up+0x38/0x50
 [<ffffffff81031694>] printk_tick+0x39/0x3b
 [<ffffffff8103ac37>] update_process_times+0x3f/0x5c
 [<ffffffff8104dc63>] tick_periodic+0x5d/0x69
 [<ffffffff8104dc90>] tick_handle_periodic+0x21/0x71
 [<ffffffff81018fd0>] smp_apic_timer_interrupt+0x82/0x95
 [<ffffffff81002853>] apic_timer_interrupt+0x13/0x20
 [<ffffffff81030cb5>] ? panic_blink_one_second+0x0/0x7b
 [<ffffffff813ebdd6>] ? panic+0x10a/0x10c
 [<ffffffff810474b0>] ? up+0x34/0x39
 [<ffffffff81031ccc>] ? kmsg_dump+0x112/0x12c
 [<ffffffff813eeff1>] ? oops_end+0x81/0x8e
 [<ffffffff8101efee>] ? no_context+0x1f3/0x202
 [<ffffffff8101f1b7>] ? __bad_area_nosemaphore+0x1ba/0x1e0
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff810264dc>] ? activate_task+0x42/0x53
 [<ffffffff8102c967>] ? try_to_wake_up+0x272/0x284
 [<ffffffff8101f1eb>] ? bad_area_nosemaphore+0xe/0x10
 [<ffffffff813f0f3f>] ? do_page_fault+0x1c8/0x37c
 [<ffffffff81028d24>] ? enqueue_task_fair+0x16d/0x17a
 [<ffffffff813ee55f>] ? page_fault+0x1f/0x30
 [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff8132ad57>] ? op_amd_stop+0x2d/0x8e
 [<ffffffff8132ad46>] ? op_amd_stop+0x1c/0x8e
 [<ffffffff8132a602>] ? nmi_cpu_stop+0x21/0x23
 [<ffffffff810521b3>] ? generic_smp_call_function_single_interrupt+0xdf/0x11b
 [<ffffffff8101804f>] ? smp_call_function_single_interrupt+0x22/0x31
 [<ffffffff810029f3>] ? call_function_single_interrupt+0x13/0x20
 <EOI>  [<ffffffff8102c9a5>] ? wake_up_process+0x10/0x12
 [<ffffffff81008701>] ? default_idle+0x22/0x37
 [<ffffffff8100896d>] ? c1e_idle+0xdf/0xe6
 [<ffffffff813f1170>] ? atomic_notifier_call_chain+0x13/0x15
 [<ffffffff810012fb>] ? cpu_idle+0x4b/0x7e
 [<ffffffff813e8a4e>] ? start_secondary+0x1ae/0x1b2
---[ end trace 679ac372d674b758 ]---

Cc: Andi Kleen <andi@firstfloor.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:37:56 +02:00
Robert Richter
5bdb7934ca oprofile/x86: remove duplicate IBS capability check
The check is already done in ibs_exit().

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:29 +02:00
Robert Richter
da759fe5be oprofile/x86: move IBS code
Moving code to make future changes easier. This groups all IBS code
together.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:28 +02:00
Robert Richter
8617f98c00 oprofile/x86: return -EBUSY if counters are already reserved
In case a counter is already reserved by the watchdog or perf_event
subsystem, oprofile ignored this counters silently. This case is
handled now and oprofile_setup() now reports an error.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:28 +02:00
Robert Richter
83300ce0df oprofile/x86: moving shutdown functions
Moving some code in preparation of the next patch.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:27 +02:00
Robert Richter
d0e4120fda oprofile/x86: reserve counter msrs pairwise
For AMD's and Intel's P6 generic performance counters have pairwise
counter and control msrs. This patch changes the counter reservation
in a way that both msrs must be registered. It joins some counter
loops and also removes the unnecessary NUM_CONTROLS macro in the AMD
implementation.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:26 +02:00
Robert Richter
8f5a2dd83a oprofile/x86: rework error handler in nmi_setup()
This patch improves the error handler in nmi_setup(). Most parts of
the code are moved to allocate_msrs(). In case of an error
allocate_msrs() also frees already allocated memory. nmi_setup()
becomes easier and better extendable.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-05-04 11:35:07 +02:00
Robert Richter
948b1bb89a perf, x86: Undo some some *_counter* -> *_event* renames
The big rename:

 cdd6c48 perf: Do the big rename: Performance Counters -> Performance Events

accidentally renamed some members of stucts that were named after
registers in the spec. To avoid confusion this patch reverts some
changes. The related specs are MSR descriptions in AMD's BKDGs and the
ARCHITECTURAL PERFORMANCE MONITORING section in the Intel 64 and IA-32
Architectures Software Developer's Manuals.

This patch does:

 $ sed -i -e 's:num_events:num_counters:g' \
   arch/x86/include/asm/perf_event.h \
   arch/x86/kernel/cpu/perf_event_amd.c \
   arch/x86/kernel/cpu/perf_event.c \
   arch/x86/kernel/cpu/perf_event_intel.c \
   arch/x86/kernel/cpu/perf_event_p6.c \
   arch/x86/kernel/cpu/perf_event_p4.c \
   arch/x86/oprofile/op_model_ppro.c

 $ sed -i -e 's:event_bits:cntval_bits:g' -e 's:event_mask:cntval_mask:g' \
   arch/x86/kernel/cpu/perf_event_amd.c \
   arch/x86/kernel/cpu/perf_event.c \
   arch/x86/kernel/cpu/perf_event_intel.c \
   arch/x86/kernel/cpu/perf_event_p6.c \
   arch/x86/kernel/cpu/perf_event_p4.c

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1269880612-25800-2-git-send-email-robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 19:52:02 +02:00
Robert Richter
bb1165d688 perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE
For consistency reasons this patch renames
ARCH_PERFMON_EVENTSEL0_ENABLE to ARCH_PERFMON_EVENTSEL_ENABLE.

The following is performed:

 $ sed -i -e s/ARCH_PERFMON_EVENTSEL0_ENABLE/ARCH_PERFMON_EVENTSEL_ENABLE/g \
   arch/x86/include/asm/perf_event.h arch/x86/kernel/cpu/perf_event.c \
   arch/x86/kernel/cpu/perf_event_p6.c \
   arch/x86/kernel/cpu/perfctr-watchdog.c \
   arch/x86/oprofile/op_model_amd.c arch/x86/oprofile/op_model_ppro.c

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-03-01 14:21:23 +01:00
Robert Richter
a163b1099d perf, x86: add some IBS macros to perf_event.h
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-03-01 11:23:15 +01:00
Robert Richter
1d6040f17d perf, x86: make IBS macros available in perf_event.h
This patch moves code from oprofile to perf_event.h to make it also
available for usage by perf.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-03-01 11:23:15 +01:00
Robert Richter
cfc9c0b450 oprofile/x86: fix msr access to reserved counters
During switching virtual counters there is access to perfctr msrs. If
the counter is not available this fails due to an invalid
address. This patch fixes this.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:28:16 +01:00
Robert Richter
c17c8fbf34 oprofile/x86: use kzalloc() instead of kmalloc()
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:20:03 +01:00
Robert Richter
68dc819ce8 oprofile/x86: fix perfctr nmi reservation for mulitplexing
Multiple virtual counters share one physical counter. The reservation
of virtual counters fails due to duplicate allocation of the same
counter. The counters are already reserved. Thus, virtual counter
reservation may removed at all. This also makes the code easier.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:19:03 +01:00
Naga Chumbalkar
8588d10671 oprofile/x86: add comment to counter-in-use warning
Currently, oprofile fails silently on platforms where a non-OS entity
such as the system firmware "enables" and uses a performance
counter. There is a warning in the code for this case.

The warning indicates an already running counter. If oprofile doesn't
collect data, then try using a different performance counter on your
platform to monitor the desired event. Delete the counter from the
desired event by editing the

 /usr/share/oprofile/<cpu_type>/<cpu>/events

file. If the event cannot be monitored by any other counter, contact
your hardware or BIOS vendor.

Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:34 +01:00
Robert Richter
98a2e73a06 oprofile/x86: warn user if a counter is already active
This patch generates a warning if a counter is already active.

Implemented for AMD and P6 models. P4 is not supported.

Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:03 +01:00
Robert Richter
ba52078e19 oprofile/x86: implement randomization for IBS periodic op counter
IBS selects an op (execution operation) for sampling by counting
either cycles or dispatched ops. Better statistical samples can be
produced by adding a software generated random offset to the periodic
op counter value with each sample.

This patch adds software randomization to the IBS periodic op
counter. The lower 12 bits of the 20 bit counter are
randomized. IbsOpCurCnt is initialized with a 12 bit random value.

There is a work around if the hw can not write to IbsOpCurCnt. Then
the lower 8 bits of the 16 bit IbsOpMaxCnt [15:0] value are randomized
in the range of -128 to +127 by adding/subtracting an offset to the
maximum count (IbsOpMaxCnt).

The linear feedback shift register (LFSR) algorithm is used for
pseudo-random number generation to have low impact to the memory
system.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Suravee Suthikulpanit
f125be1469 oprofile/x86: implement lsfr pseudo-random number generator for IBS
This patch implements a linear feedback shift register (LFSR) for
pseudo-random number generation for IBS.

For IBS measurements it would be good to minimize memory traffic in
the interrupt handler since every access pollutes the data
caches. Computing a maximal period LFSR just needs shifts and ORs.

The LFSR method is good enough to randomize the ops at low
overhead. 16 pseudo-random bits are enough for the implementation and
it doesn't matter that the pattern repeats with a fairly short
cycle. It only needs to break up (hard) periodic sampling behavior.

The logic was designed by Paul Drongowski.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Robert Richter
64683da664 oprofile/x86: implement IBS cpuid feature detection
This patch adds IBS feature detection using cpuid flags. An IBS
capability mask is introduced to test for certain IBS features. The
bit mask is the same as for IBS cpuid feature flags (Fn8000_001B_EAX),
but bit 0 is used to indicate the existence of IBS.

The patch also changes the handling of the IbsOpCntCtl bit (periodic
op counter count control). The oprofilefs file for this feature
(ibs_op/dispatched_ops) will be only exposed if the feature is
available, also the default for the bit is set to count clock cycles.

In general, the userland can detect the availability of a feature by
checking for the corresponding file in oprofilefs. If it exists, the
feature also exists. This may lead to a dynamic file layout depending
on the cpu type with that the userland has to deal with. Current
opcontrol is compatible.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:02 +01:00
Robert Richter
89baaaa98a oprofile/x86: remove node check in AMD IBS initialization
Standard AMD systems have the same number of nodes as there are
northbridge devices. However, there may kernel configurations
(especially for 32 bit) or system setups exist, where the node number
is different or it can not be detected properly. Thus the check is not
reliable and may fail though IBS setup was fine. For this reason it is
better to remove the check.

Cc: stable <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:14:01 +01:00
Robert Richter
013cfc5067 oprofile/x86: remove OPROFILE_IBS config option
OProfile support for IBS is now for several versions in the
kernel. The feature is stable now and the code can be activated
permanently.

As a side effect IBS now works also on nosmp configs.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:13:55 +01:00