Commit Graph

579 Commits

Author SHA1 Message Date
Linus Torvalds
90f1e7481e Merge branch 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Use new irq_move functions
  xen: Convert genirq namespace
  xen: fix p2m section mismatches
  xen/p2m: Allocate p2m tracking pages on override
  xen-gntdev: unlock on error path in gntdev_mmap()
  xen-gntdev: return -EFAULT on copy_to_user failure
2011-03-29 11:36:52 -07:00
Randy Dunlap
b83c6e55ac xen: fix p2m section mismatches
Fix section mismatch warnings:
set_phys_range_identity() is called by __init xen_set_identity(),
so also mark set_phys_range_identity() as __init.
then:
__early_alloc_p2m() is called set_phys_range_identity(), so also mark
__early_alloc_p2m() as __init.

WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk()
The function __early_alloc_p2m() references
the function __init extend_brk().
This is often because __early_alloc_p2m lacks a __init
annotation or the annotation of extend_brk is wrong.

WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk()
The function set_phys_range_identity() references
the function __init extend_brk().
This is often because set_phys_range_identity lacks a __init
annotation or the annotation of extend_brk is wrong.

[v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-29 10:01:03 -04:00
Daniel De Graaf
b254244d26 xen/p2m: Allocate p2m tracking pages on override
It is possible to add a p2m override on pages that are currently mapped
to INVALID_P2M_ENTRY; in particular, this will happen when using
ballooned pages in gntdev. This means that set_phys_to_machine must be
used instead of __set_phys_to_machine.

Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-24 10:36:01 -04:00
Linus Torvalds
73d5a8675f Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  xen: update mask_rw_pte after kernel page tables init changes
  xen: set max_pfn_mapped to the last pfn mapped
  x86: Cleanup highmap after brk is concluded

Fix up trivial onflict (added header file includes) in
arch/x86/mm/init_64.c
2011-03-22 10:41:36 -07:00
Stefano Stabellini
d8aa5ec338 xen: update mask_rw_pte after kernel page tables init changes
After "x86-64, mm: Put early page table high" already existing kernel
page table pages can be mapped using early_ioremap too so we need to
update mask_rw_pte to make sure these pages are still mapped RO.
The reason why we have to do that is explain by the commit message of
fef5ba7979:

"Xen requires that all pages containing pagetable entries to be mapped
read-only.  If pages used for the initial pagetable are already mapped
then we can change the mapping to RO.  However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.

..SNIP..

the pagetable setup code early_ioremaps the pages to write their
entries, so we must make sure that mappings created in the early_ioremap
fixmap area are mapped RW.  (Those mappings are removed before the pages
are presented to Xen as pagetable pages.)"

We accomplish all this in mask_rw_pte by mapping RO all the pages mapped
using early_ioremap apart from the last one that has been allocated
because it is not a page table page yet (it has not been hooked into the
page tables yet).

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-03-19 11:58:28 -07:00
Stefano Stabellini
14988a4d35 xen: set max_pfn_mapped to the last pfn mapped
Do not set max_pfn_mapped to the end of the initial memory mappings,
that also contain pages that don't belong in pfn space (like the mfn
list).

Set max_pfn_mapped to the last real pfn mapped in the initial memory
mappings that is the pfn backing _end.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-03-19 11:58:25 -07:00
Linus Torvalds
f2e1fbb5f2 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Flush TLB if PGD entry is changed in i386 PAE mode
  x86, dumpstack: Correct stack dump info when frame pointer is available
  x86: Clean up csum-copy_64.S a bit
  x86: Fix common misspellings
  x86: Fix misspelling and align params
  x86: Use PentiumPro-optimized partial_csum() on VIA C7
2011-03-18 10:45:21 -07:00
Lucas De Marchi
0d2eb44f63 x86: Fix common misspellings
They were generated by 'codespell' and then manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-18 10:39:30 +01:00
Linus Torvalds
514af9f790 Merge branches 'stable/hvc-console', 'stable/gntalloc.v6' and 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/hvc-console' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.

* 'stable/gntalloc.v6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: gntdev: fix build warning
  xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override
  xen-gntdev: Add cast to pointer
  xen-gntdev: Fix incorrect use of zero handle
  xen: change xen/[gntdev/gntalloc] to default m
  xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings
  xen-gntdev: Avoid double-mapping memory
  xen-gntdev: Avoid unmapping ranges twice
  xen-gntdev: Use map->vma for checking map validity
  xen-gntdev: Fix unmap notify on PV domains
  xen-gntdev: Fix memory leak when mmap fails
  xen/gntalloc,gntdev: Add unmap notify ioctl
  xen-gntalloc: Userspace grant allocation driver
  xen-gntdev: Support mapping in HVM domains
  xen-gntdev: Add reference counting to maps
  xen-gntdev: Use find_vma rather than iterating our vma list manually
  xen-gntdev: Change page limit to be global instead of per-open

* 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (24 commits)
  xen-gntdev: Use ballooned pages for grant mappings
  xen-balloon: Add interface to retrieve ballooned pages
  xen-balloon: Move core balloon functionality out of module
  xen/balloon: Remove pr_info's and don't alter retry_count
  xen/balloon: Protect against CPU exhaust by event/x process
  xen/balloon: Migration from mod_timer() to schedule_delayed_work()
  xen/balloon: Removal of driver_pages
2011-03-17 18:16:36 -07:00
Linus Torvalds
fc82e1d59a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (21 commits)
  PM / Hibernate: Reduce autotuned default image size
  PM / Core: Introduce struct syscore_ops for core subsystems PM
  PM QoS: Make pm_qos settings readable
  PM / OPP: opp_find_freq_exact() documentation fix
  PM: Documentation/power/states.txt: fix repetition
  PM: Make system-wide PM and runtime PM treat subsystems consistently
  PM: Simplify kernel/power/Kconfig
  PM: Add support for device power domains
  PM: Drop pm_flags that is not necessary
  PM: Allow pm_runtime_suspend() to succeed during system suspend
  PM: Clean up PM_TRACE dependencies and drop unnecessary Kconfig option
  PM: Remove CONFIG_PM_OPS
  PM: Reorder power management Kconfig options
  PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME)
  PM / ACPI: Remove references to pm_flags from bus.c
  PM: Do not create wakeup sysfs files for devices that cannot wake up
  USB / Hub: Do not call device_set_wakeup_capable() under spinlock
  PM: Use appropriate printk() priority level in trace.c
  PM / Wakeup: Don't update events_check_enabled in pm_get_wakeup_count()
  PM / Wakeup: Make pm_save_wakeup_count() work as documented
  ...
2011-03-16 09:24:44 -07:00
Linus Torvalds
181f977d13 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (93 commits)
  x86, tlb, UV: Do small micro-optimization for native_flush_tlb_others()
  x86-64, NUMA: Don't call numa_set_distanc() for all possible node combinations during emulation
  x86-64, NUMA: Don't assume phys node 0 is always online in numa_emulation()
  x86-64, NUMA: Clean up initmem_init()
  x86-64, NUMA: Fix numa_emulation code with node0 without RAM
  x86-64, NUMA: Revert NUMA affine page table allocation
  x86: Work around old gas bug
  x86-64, NUMA: Better explain numa_distance handling
  x86-64, NUMA: Fix distance table handling
  mm: Move early_node_map[] reverse scan helpers under HAVE_MEMBLOCK
  x86-64, NUMA: Fix size of numa_distance array
  x86: Rename e820_table_* to pgt_buf_*
  bootmem: Move __alloc_memory_core_early() to nobootmem.c
  bootmem: Move contig_page_data definition to bootmem.c/nobootmem.c
  bootmem: Separate out CONFIG_NO_BOOTMEM code into nobootmem.c
  x86-64, NUMA: Seperate out numa_alloc_distance() from numa_set_distance()
  x86-64, NUMA: Add proper function comments to global functions
  x86-64, NUMA: Move NUMA emulation into numa_emulation.c
  x86-64, NUMA: Prepare numa_emulation() for moving NUMA emulation into a separate file
  x86-64, NUMA: Do not scan two times for setup_node_bootmem()
  ...

Fix up conflicts in arch/x86/kernel/smpboot.c
2011-03-15 19:49:10 -07:00
Linus Torvalds
da849abeb8 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, binutils, xen: Fix another wrong size directive
  x86: Remove dead config option X86_CPU
  x86: Really print supported CPUs if PROCESSOR_SELECT=y
  x86: Fix a bogus unwind annotation in lib/semaphore_32.S
  um, x86-64: Fix UML build after adding CFI annotations to lib/rwsem_64.S
  x86: Remove unused bits from lib/thunk_*.S
  x86: Use {push,pop}_cfi in more places
  x86-64: Add CFI annotations to lib/rwsem_64.S
  x86, asm: Cleanup unnecssary macros in asm-offsets.c
  x86, system.h: Drop unused __SAVE/__RESTORE macros
  x86: Use bitmap library functions
  x86: Partly unify asm-offsets_{32,64}.c
  x86: Reduce back the alignment of the per-CPU data section
2011-03-15 18:59:56 -07:00
Linus Torvalds
76ca078328 Merge branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
  xen: suspend: remove xen_hvm_suspend
  xen: suspend: pull pre/post suspend hooks out into suspend_info
  xen: suspend: move arch specific pre/post suspend hooks into generic hooks
  xen: suspend: refactor non-arch specific pre/post suspend hooks
  xen: suspend: add "arch" to pre/post suspend hooks
  xen: suspend: pass extra hypercall argument via suspend_info struct
  xen: suspend: refactor cancellation flag into a structure
  xen: suspend: use HYPERVISOR_suspend for PVHVM case instead of open coding
  xen: switch to new schedop hypercall by default.
  xen: use new schedop interface for suspend
  xen: do not respond to unknown xenstore control requests
  xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
  xen: PV on HVM: support PV spinlocks and IPIs
  xen: make the ballon driver work for hvm domains
  xen-blkfront: handle Xen major numbers other than XENVBD
  xen: do not use xen_info on HVM, set pv_info name to "Xen HVM"
  xen: no need to delay xen_setup_shutdown_event for hvm guests anymore
2011-03-15 10:59:09 -07:00
Linus Torvalds
27d2a8b97e Merge branches 'stable/ia64', 'stable/blkfront-cleanup' and 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/ia64' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: ia64 build broken due to "xen: switch to new schedop hypercall by default."

* 'stable/blkfront-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: Union the blkif_request request specific fields

* 'stable/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: annotate functions which only call into __init at start of day
  xen p2m: annotate variable which appears unused
  xen: events: mark cpu_evtchn_mask_p as __refdata
2011-03-15 10:49:16 -07:00
Linus Torvalds
397fae0818 Merge branches 'stable/irq.rework' and 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/irq.rework' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
  xen: Use IRQF_FORCE_RESUME
  xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
  xen: Fix compile error introduced by "switch to new irq_chip functions"
  xen: Switch to new irq_chip functions
  xen: Remove stale irq_chip.end
  xen: events: do not free legacy IRQs
  xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
  xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
  xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
  xen: handled remapped IRQs when enabling a pcifront PCI device.
  genirq: Add IRQF_FORCE_RESUME

* 'stable/pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code.
  pci/xen: Cleanup: convert int** to int[]
  pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq
  xen-pcifront: Sanity check the MSI/MSI-X values
  xen-pcifront: don't use flush_scheduled_work()
2011-03-15 10:47:16 -07:00
Linus Torvalds
c7146dd009 Merge branches 'stable/p2m-identity.v4.9.1' and 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/p2m-identity.v4.9.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/m2p: Check whether the MFN has IDENTITY_FRAME bit set..
  xen/m2p: No need to catch exceptions when we know that there is no RAM
  xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
  xen/debugfs: Add 'p2m' file for printing out the P2M layout.
  xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
  xen/mmu: WARN_ON when racing to swap middle leaf.
  xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
  xen/mmu: Add the notion of identity (1-1) mapping.
  xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.

* 'stable/e820' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/e820: Don't mark balloon memory as E820_UNUSABLE when running as guest and fix overflow.
  xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps.
2011-03-15 10:32:15 -07:00
Ingo Molnar
8460b3e5bc Merge commit 'v2.6.38' into x86/mm
Conflicts:
	arch/x86/mm/numa_64.c

Merge reason: Resolve the conflict, update the branch to .38.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-15 08:29:44 +01:00
Rafael J. Wysocki
1eb208aea3 PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME)
From the users' point of view CONFIG_PM is really only used for
making it possible to set CONFIG_SUSPEND, CONFIG_HIBERNATION,
CONFIG_PM_RUNTIME and (surprisingly enough) CONFIG_XEN_SAVE_RESTORE
(CONFIG_PM_OPP also depends on CONFIG_PM, but quite artificially).
However, both CONFIG_SUSPEND and CONFIG_HIBERNATION require platform
support (independent of CONFIG_PM) and it is not quite obvious that
CONFIG_PM has to be set for CONFIG_XEN_SAVE_RESTORE to be available.
Thus, from the users' point of view, it would be more logical to
automatically select CONFIG_PM if any of the above options depending
on it are set.

Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME),
which will cause it to be selected when any of CONFIG_SUSPEND,
CONFIG_HIBERNATION, CONFIG_PM_RUNTIME, CONFIG_XEN_SAVE_RESTORE is
set and will clarify its meaning.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-15 00:43:15 +01:00
Daniel Kiper
06f521d5d6 xen/balloon: Removal of driver_pages
Removal of driver_pages (I do not have seen any references to it).

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:34:19 -04:00
Konrad Rzeszutek Wilk
fc25151d9a xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set.
Only enabled if XEN_DEBUG is enabled. We print a warning
when:

 pfn_to_mfn(pfn) == pfn, but no VM_IO (_PAGE_IOMAP) flag set
	(and pfn is an identity mapped pfn)
 pfn_to_mfn(pfn) != pfn, and VM_IO flag is set.
	(ditto, pfn is an identity mapped pfn)

[v2: Make it dependent on CONFIG_XEN_DEBUG instead of ..DEBUG_FS]
[v3: Fix compiler warning]

Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:17:12 -04:00
Konrad Rzeszutek Wilk
2222e71bd6 xen/debugfs: Add 'p2m' file for printing out the P2M layout.
We walk over the whole P2M tree and construct a simplified view of
which PFN regions belong to what level and what type they are.

Only enabled if CONFIG_XEN_DEBUG_FS is set.

[v2: UNKN->UNKNOWN, use uninitialized_var]
[v3: Rebased on top of mmu->p2m code split]
[v4: Fixed the else if]
Reviewed-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:17:11 -04:00
Konrad Rzeszutek Wilk
68df0da7f4 xen/setup: Set identity mapping for non-RAM E820 and E820 gaps.
We walk the E820 region and start at 0 (for PV guests we start
at ISA_END_ADDRESS) and skip any E820 RAM regions. For all other
regions and as well the gaps we set them to be identity mappings.

The reasons we do not want to set the identity mapping from 0->
ISA_END_ADDRESS when running as PV is b/c that the kernel would
try to read DMI information and fail (no permissions to read that).
There is a lot of gnarly code to deal with that weird region so
we won't try to do a cleanup in this patch.

This code ends up calling 'set_phys_to_identity' with the start
and end PFN of the the E820 that are non-RAM or have gaps.
On 99% of machines that means one big region right underneath the
4GB mark. Usually starts at 0xc0000 (or 0x80000) and goes to
0x100000.

[v2: Fix for E820 crossing 1MB region and clamp the start]
[v3: Squshed in code that does this over ranges]
[v4: Moved the comment to the correct spot]
[v5: Use the "raw" E820 from the hypervisor]
[v6: Added Review-by tag]

Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:17:10 -04:00
Konrad Rzeszutek Wilk
c761779877 xen/mmu: WARN_ON when racing to swap middle leaf.
The initial bootup code uses set_phys_to_machine quite a lot, and after
bootup it would be used by the balloon driver. The balloon driver does have
mutex lock so this should not be necessary - but just in case, add
a WARN_ON if we do hit this scenario. If we do fail this, it is OK
to continue as there is a backup mechanism (VM_IO) that can bypass
the P2M and still set the _PAGE_IOMAP flags.

[v2: Change from WARN to BUG_ON]
[v3: Rebased on top of xen->p2m code split]
[v4: Change from BUG_ON to WARN]
Reviewed-by: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:17:09 -04:00
Konrad Rzeszutek Wilk
fb38923ead xen/mmu: Set _PAGE_IOMAP if PFN is an identity PFN.
If we find that the PFN is within the P2M as an identity
PFN make sure to tack on the _PAGE_IOMAP flag.

Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:17:08 -04:00
Konrad Rzeszutek Wilk
f4cec35b0d xen/mmu: Add the notion of identity (1-1) mapping.
Our P2M tree structure is a three-level. On the leaf nodes
we set the Machine Frame Number (MFN) of the PFN. What this means
is that when one does: pfn_to_mfn(pfn), which is used when creating
PTE entries, you get the real MFN of the hardware. When Xen sets
up a guest it initially populates a array which has descending
(or ascending) MFN values, as so:

 idx: 0,  1,       2
 [0x290F, 0x290E, 0x290D, ..]

so pfn_to_mfn(2)==0x290D. If you start, restart many guests that list
starts looking quite random.

We graft this structure on our P2M tree structure and stick in
those MFN in the leafs. But for all other leaf entries, or for the top
root, or middle one, for which there is a void entry, we assume it is
"missing". So
 pfn_to_mfn(0xc0000)=INVALID_P2M_ENTRY.

We add the possibility of setting 1-1 mappings on certain regions, so
that:
 pfn_to_mfn(0xc0000)=0xc0000

The benefit of this is, that we can assume for non-RAM regions (think
PCI BARs, or ACPI spaces), we can create mappings easily b/c we
get the PFN value to match the MFN.

For this to work efficiently we introduce one new page p2m_identity and
allocate (via reserved_brk) any other pages we need to cover the sides
(1GB or 4MB boundary violations). All entries in p2m_identity are set to
INVALID_P2M_ENTRY type (Xen toolstack only recognizes that and MFNs,
no other fancy value).

On lookup we spot that the entry points to p2m_identity and return the identity
value instead of dereferencing and returning INVALID_P2M_ENTRY. If the entry
points to an allocated page, we just proceed as before and return the PFN.
If the PFN has IDENTITY_FRAME_BIT set we unmask that in appropriate functions
(pfn_to_mfn).

The reason for having the IDENTITY_FRAME_BIT instead of just returning the
PFN is that we could find ourselves where pfn_to_mfn(pfn)==pfn for a
non-identity pfn. To protect ourselves against we elect to set (and get) the
IDENTITY_FRAME_BIT on all identity mapped PFNs.

This simplistic diagram is used to explain the more subtle piece of code.
There is also a digram of the P2M at the end that can help.
Imagine your E820 looking as so:

                   1GB                                           2GB
/-------------------+---------\/----\         /----------\    /---+-----\
| System RAM        | Sys RAM ||ACPI|         | reserved |    | Sys RAM |
\-------------------+---------/\----/         \----------/    \---+-----/
                              ^- 1029MB                       ^- 2001MB

[1029MB = 263424 (0x40500), 2001MB = 512256 (0x7D100), 2048MB = 524288 (0x80000)]

And dom0_mem=max:3GB,1GB is passed in to the guest, meaning memory past 1GB
is actually not present (would have to kick the balloon driver to put it in).

When we are told to set the PFNs for identity mapping (see patch: "xen/setup:
Set identity mapping for non-RAM E820 and E820 gaps.") we pass in the start
of the PFN and the end PFN (263424 and 512256 respectively). The first step is
to reserve_brk a top leaf page if the p2m[1] is missing. The top leaf page
covers 512^2 of page estate (1GB) and in case the start or end PFN is not
aligned on 512^2*PAGE_SIZE (1GB) we loop on aligned 1GB PFNs from start pfn to
end pfn.  We reserve_brk top leaf pages if they are missing (means they point
to p2m_mid_missing).

With the E820 example above, 263424 is not 1GB aligned so we allocate a
reserve_brk page which will cover the PFNs estate from 0x40000 to 0x80000.
Each entry in the allocate page is "missing" (points to p2m_missing).

Next stage is to determine if we need to do a more granular boundary check
on the 4MB (or 2MB depending on architecture) off the start and end pfn's.
We check if the start pfn and end pfn violate that boundary check, and if
so reserve_brk a middle (p2m[x][y]) leaf page. This way we have a much finer
granularity of setting which PFNs are missing and which ones are identity.
In our example 263424 and 512256 both fail the check so we reserve_brk two
pages. Populate them with INVALID_P2M_ENTRY (so they both have "missing" values)
and assign them to p2m[1][2] and p2m[1][488] respectively.

At this point we would at minimum reserve_brk one page, but could be up to
three. Each call to set_phys_range_identity has at maximum a three page
cost. If we were to query the P2M at this stage, all those entries from
start PFN through end PFN (so 1029MB -> 2001MB) would return INVALID_P2M_ENTRY
("missing").

The next step is to walk from the start pfn to the end pfn setting
the IDENTITY_FRAME_BIT on each PFN. This is done in 'set_phys_range_identity'.
If we find that the middle leaf is pointing to p2m_missing we can swap it over
to p2m_identity - this way covering 4MB (or 2MB) PFN space.  At this point we
do not need to worry about boundary aligment (so no need to reserve_brk a middle
page, figure out which PFNs are "missing" and which ones are identity), as that
has been done earlier.  If we find that the middle leaf is not occupied by
p2m_identity or p2m_missing, we dereference that page (which covers
512 PFNs) and set the appropriate PFN with IDENTITY_FRAME_BIT. In our example
263424 and 512256 end up there, and we set from p2m[1][2][256->511] and
p2m[1][488][0->256] with IDENTITY_FRAME_BIT set.

All other regions that are void (or not filled) either point to p2m_missing
(considered missing) or have the default value of INVALID_P2M_ENTRY (also
considered missing). In our case, p2m[1][2][0->255] and p2m[1][488][257->511]
contain the INVALID_P2M_ENTRY value and are considered "missing."

This is what the p2m ends up looking (for the E820 above) with this
fabulous drawing:

   p2m         /--------------\
 /-----\       | &mfn_list[0],|                           /-----------------\
 |  0  |------>| &mfn_list[1],|    /---------------\      | ~0, ~0, ..      |
 |-----|       |  ..., ~0, ~0 |    | ~0, ~0, [x]---+----->| IDENTITY [@256] |
 |  1  |---\   \--------------/    | [p2m_identity]+\     | IDENTITY [@257] |
 |-----|    \                      | [p2m_identity]+\\    | ....            |
 |  2  |--\  \-------------------->|  ...          | \\   \----------------/
 |-----|   \                       \---------------/  \\
 |  3  |\   \                                          \\  p2m_identity
 |-----| \   \-------------------->/---------------\   /-----------------\
 | ..  +->+                        | [p2m_identity]+-->| ~0, ~0, ~0, ... |
 \-----/ /                         | [p2m_identity]+-->| ..., ~0         |
        / /---------------\        | ....          |   \-----------------/
       /  | IDENTITY[@0]  |      /-+-[x], ~0, ~0.. |
      /   | IDENTITY[@256]|<----/  \---------------/
     /    | ~0, ~0, ....  |
    |     \---------------/
    |
    p2m_missing             p2m_missing
/------------------\     /------------\
| [p2m_mid_missing]+---->| ~0, ~0, ~0 |
| [p2m_mid_missing]+---->| ..., ~0    |
\------------------/     \------------/

where ~0 is INVALID_P2M_ENTRY. IDENTITY is (PFN | IDENTITY_BIT)

Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
[v5: Changed code to use ranges, added ASCII art]
[v6: Rebased on top of xen->p2m code split]
[v4: Squished patches in just this one]
[v7: Added RESERVE_BRK for potentially allocated pages]
[v8: Fixed alignment problem]
[v9: Changed 1<<3X to 1<<BITS_PER_LONG-X]
[v10: Copied git commit description in the p2m code + Add Review tag]
[v11: Title had '2-1' - should be '1-1' mapping]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-14 11:16:41 -04:00
Konrad Rzeszutek Wilk
86b32122fd xen/e820: Don't mark balloon memory as E820_UNUSABLE when running as guest and fix overflow.
If we have a guest that asked for:

memory=1024
maxmem=2048

Which means we want 1GB now, and create pagetables so that we can expand
up to 2GB, we would have this E820 layout:

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000080800000 (usable)

Due to patch: "xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps."
we would mark the memory past the 1GB mark as unusuable resulting in:

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000040000000 (usable)
[    0.000000]  Xen: 0000000040000000 - 0000000080800000 (unusable)

which meant that we could not balloon up anymore. We could
balloon the guest down. The fix is to run the code introduced
by the above mentioned patch only for the initial domain.

We will have to revisit this once we start introducing a modified
E820 for PCI passthrough so that we can utilize the P2M identity code.

We also fix an overflow by having UL instead of ULL on 32-bit machines.

[v2: Ian pointed to the overflow issue]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-11 11:01:45 -05:00
Andrea Arcangeli
a79e53d856 x86/mm: Fix pgd_lock deadlock
It's forbidden to take the page_table_lock with the irq disabled
or if there's contention the IPIs (for tlb flushes) sent with
the page_table_lock held will never run leading to a deadlock.

Nobody takes the pgd_lock from irq context so the _irqsave can be
removed.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <201102162345.p1GNjMjm021738@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-10 09:41:57 +01:00
Ian Campbell
f611f2da99 xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
The patches missed an indirect use of IRQF_NO_SUSPEND pulled in via
IRQF_TIMER. The following patch fixes the issue.

With this fixlet PV guest migration works just fine. I also booted the
entire series as a dom0 kernel and it appeared fine.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 12:00:31 -05:00
Konrad Rzeszutek Wilk
6eaa412f27 xen: Mark all initial reserved pages for the balloon as INVALID_P2M_ENTRY.
With this patch, we diligently set regions that will be used by the
balloon driver to be INVALID_P2M_ENTRY and under the ownership
of the balloon driver. We are OK using the __set_phys_to_machine
as we do not expect to be allocating any P2M middle or entries pages.
The set_phys_to_machine has the side-effect of potentially allocating
new pages and we do not want that at this stage.

We can do this because xen_build_mfn_list_list will have already
allocated all such pages up to xen_max_p2m_pfn.

We also move the check for auto translated physmap down the
stack so it is present in __set_phys_to_machine.

[v2: Rebased with mmu->p2m code split]
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-03 11:52:48 -05:00
Stratos Psomadakis
7bf04be8f4 x86, asm: Cleanup unnecssary macros in asm-offsets.c
PAGE_SIZE_asm, PAGE_SHIFT_asm, THREAD_SIZE_asm can be safely removed from 
asm-offsets.c, and be replaced by their non-'_asm' counterparts in the code 
that uses them, since the _AC macro defined in include/linux/const.h makes
PAGE_SIZE/PAGE_SHIFT/THREAD_SIZE work with as.

Signed-off-by: Stratos Psomadakis <psomas@cslab.ece.ntua.gr>
LKML-Reference: <1298666774-17646-2-git-send-email-psomas@cslab.ece.ntua.gr>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-02-25 16:37:32 -08:00
Ian Campbell
03c8142bd2 xen: suspend: add "arch" to pre/post suspend hooks
xen_pre_device_suspend is unused on ia64.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-25 16:43:12 +00:00
Stefano Stabellini
e057a4b6e0 xen: fix compile issue if XEN is enabled but XEN_PVHVM is disabled
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2011-02-25 16:43:06 +00:00
Stefano Stabellini
99bbb3a84a xen: PV on HVM: support PV spinlocks and IPIs
Initialize PV spinlocks on boot CPU right after native_smp_prepare_cpus
(that switch to APIC mode and initialize APIC routing); on secondary
CPUs on CPU_UP_PREPARE.

Enable the usage of event channels to send and receive IPIs when
running as a PV on HVM guest.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2011-02-25 16:43:06 +00:00
Stefano Stabellini
cff520b9c2 xen: do not use xen_info on HVM, set pv_info name to "Xen HVM"
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
2011-02-25 16:43:04 +00:00
Yinghai Lu
d1b19426b0 x86: Rename e820_table_* to pgt_buf_*
e820_table_{start|end|top}, which are used to buffer page table
allocation during early boot, are now derived from memblock and don't
have much to do with e820.  Change the names so that they reflect what
they're used for.

This patch doesn't introduce any behavior change.

-v2: Ingo found that earlier patch "x86: Use early pre-allocated page
     table buffer top-down" caused crash on 32bit and needed to be
     dropped.  This patch was updated to reflect the change.

-tj: Updated commit description.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-02-24 14:52:18 +01:00
Zhang, Fengzhe
2f14ddc3a7 xen/setup: Inhibit resource API from using System RAM E820 gaps as PCI mem gaps.
With the hypervisor argument of dom0_mem=X we iterate over the physical
(only for the initial domain) E820 and subtract the the size from each
E820_RAM region the delta so that the cumulative size of all E820_RAM regions
is equal to 'X'. This sometimes ends up with E820_RAM regions with zero size
(which are removed by e820_sanitize) and E820_RAM that are smaller
than physically.

Later on the PCI API looks at the E820 and attempts to set up an
resource region for the "PCI mem". The E820 (assume dom0_mem=1GB is
set) compared to the physical looks as so:

 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  Xen: 0000000000000000 - 0000000000097c00 (usable)
 [    0.000000]  Xen: 0000000000097c00 - 0000000000100000 (reserved)
-[    0.000000]  Xen: 0000000000100000 - 00000000defafe00 (usable)
+[    0.000000]  Xen: 0000000000100000 - 0000000040000000 (usable)
 [    0.000000]  Xen: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS)
 [    0.000000]  Xen: 00000000defb1ea0 - 00000000e0000000 (reserved)
 [    0.000000]  Xen: 00000000f4000000 - 00000000f8000000 (reserved)
..
And we get
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:9efafe00)

while it should have started at e0000000 (a nice big gap up to
f4000000 exists). The "Allocating PCI" is part of the resource API.

The users that end up using those PCI I/O regions usually supply their
own BARs when calling the resource API (request_resource, or allocate_resource),
but there are exceptions which provide an empty 'struct resource' and
expect the API to provide the 'struct resource' to be populated with valid values.
The one that triggered this bug was the intel AGP driver that requested
a region for the flush page (intel_i9xx_setup_flush).

Before this patch, when running under Xen hypervisor, the 'struct resource'
returned could have (depending on the dom0_mem size) physical ranges of a 'System RAM'
instead of 'I/O' regions. This ended up with the Hypervisor failing a request
to populate PTE's with those PFNs as the domain did not have access to those
'System RAM' regions (rightly so).

After this patch, the left-over E820_RAM region from the truncation, will be
labeled as E820_UNUSABLE. The E820 will look as so:

 [    0.000000] BIOS-provided physical RAM map:
 [    0.000000]  Xen: 0000000000000000 - 0000000000097c00 (usable)
 [    0.000000]  Xen: 0000000000097c00 - 0000000000100000 (reserved)
-[    0.000000]  Xen: 0000000000100000 - 00000000defafe00 (usable)
+[    0.000000]  Xen: 0000000000100000 - 0000000040000000 (usable)
+[    0.000000]  Xen: 0000000040000000 - 00000000defafe00 (unusable)
 [    0.000000]  Xen: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS)
 [    0.000000]  Xen: 00000000defb1ea0 - 00000000e0000000 (reserved)
 [    0.000000]  Xen: 00000000f4000000 - 00000000f8000000 (reserved)

For more information:
http://mid.gmane.org/1A42CE6F5F474C41B63392A5F80372B2335E978C@shsmsx501.ccr.corp.intel.com

BugLink: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1726

Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-22 12:48:50 -05:00
Ian Campbell
44b46c3ef8 xen: annotate functions which only call into __init at start of day
Both xen_hvm_init_shared_info and xen_build_mfn_list_list can be
called at resume time as well as at start of day but only reference
__init functions (extend_brk) at start of day. Hence annotate with
__ref.

    WARNING: arch/x86/built-in.o(.text+0x4f1): Section mismatch in reference
        from the function xen_hvm_init_shared_info() to the function
        .init.text:extend_brk()
    The function xen_hvm_init_shared_info() references
    the function __init extend_brk().
    This is often because xen_hvm_init_shared_info lacks a __init
    annotation or the annotation of extend_brk is wrong.

xen_hvm_init_shared_info calls extend_brk() iff !shared_info_page and
initialises shared_info_page with the result. This happens at start of
day only.

    WARNING: arch/x86/built-in.o(.text+0x599b): Section mismatch in reference
        from the function xen_build_mfn_list_list() to the function
        .init.text:extend_brk()
    The function xen_build_mfn_list_list() references
    the function __init extend_brk().
    This is often because xen_build_mfn_list_list lacks a __init
    annotation or the annotation of extend_brk is wrong.

(this warning occurs multiple times)

xen_build_mfn_list_list only calls extend_brk() at boot time, while
building the initial mfn list list

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:34 -05:00
Ian Campbell
6b08cfebd3 xen p2m: annotate variable which appears unused
CC      arch/x86/xen/p2m.o
arch/x86/xen/p2m.c: In function 'm2p_remove_override':
arch/x86/xen/p2m.c:460: warning: 'address' may be used uninitialized in this function
arch/x86/xen/p2m.c: In function 'm2p_add_override':
arch/x86/xen/p2m.c:426: warning: 'address' may be used uninitialized in this function

In actual fact address is inialised in one "if (!PageHighMem(page))"
statement and used in a second and so is always initialised before
use.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-11 14:46:25 -05:00
Stefano Stabellini
23febeddbe xen/setup: Route halt operations to safe_halt pvop.
With this patch, the cpuidle driver does not load and
does not issue the mwait operations. Instead the hypervisor
is doing them (b/c we call the safe_halt pvops call).

This fixes quite a lot of bootup issues wherein the user had
to force interrupts for the continuation of the bootup.

Details are discussed in:

http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00535.html

[v2: Wrote the commit description]

Reported-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-27 12:00:24 -05:00
Stefano Stabellini
7cb31b752c xen/e820: Guard against E820_RAM not having page-aligned size or start.
Under Dell Inspiron 1525, and Intel SandyBridge SDP's the
BIOS e820 RAM is not page-aligned:

[   0.000000]  Xen: 0000000000100000 - 00000000df66d800 (usable)

We were not handling that and ended up setting up a pagetable
that included up to df66e000 with the disastrous effect that when

        memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));

tried to clear the page it would crash at the 2K mark.

Initially reported by Michael Young @
http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00108.html

The fix is to page-align the size and also take into consideration
the start of the E820 (in case that is not page-aligned either). This
fixes the bootup failure on those affected machines.

This patch is a rework of the Micheal A Young initial patch and
considers the case if the start is not page-aligned.

Reported-by: Michael A Young <m.a.young@durham.ac.uk>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Michael A Young <m.a.young@durham.ac.uk>
2011-01-27 10:49:35 -05:00
Stefan Bader
cf04d120d9 xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.
In case the mfn_list does not have enough entries to fill
a p2m page we do not want the entries from max_pfn up to
the boundary to be filled with unknown values. Hence
set them to INVALID_P2M_ENTRY.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-27 10:49:34 -05:00
Linus Torvalds
cfd74486ea Merge branch 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: p2m: correctly initialize partial p2m leaf
  xen: fix non-ANSI function warning in irq.c
2011-01-21 13:35:10 -08:00
Stefan Bader
8e1b4cf210 xen: p2m: correctly initialize partial p2m leaf
After changing the p2m mapping to a tree by

  commit 58e05027b5
    xen: convert p2m to a 3 level tree

and trying to boot a DomU with 615MB of memory, the following crash was
observed in the dump:

kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0107397>] xen_set_pte+0x27/0x60
*pdpt = 0000000000000000 *pde = 0000000000000000

Adding further debug statements showed that when trying to set up
pfn=0x26700 the returned mapping was invalid.

pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003)
pfn=0x26700 calling set_pte(0xc1fe7800, 0x3)

Although the last_pfn obtained from the startup info is 0x26700, which
should in turn not be hit, the additional 8MB which are added as extra
memory normally seem to be ok. This lead to looking into the initial
p2m tree construction, which uses the smaller value and assuming that
there is other code handling the extra memory.

When the p2m tree is set up, the leaves are directly pointed to the
array which the domain builder set up. But if the mapping is not on a
boundary that fits into one p2m page, this will result in the last leaf
being only partially valid. And as the invalid entries are not
initialized in that case, things go badly wrong.

I am trying to fix that by checking whether the current leaf is a
complete map and if not, allocate a completely new page and copy only
the valid pointers there. This may not be the most efficient or elegant
solution, but at least it seems to allow me booting DomUs with memory
assignments all over the range.

BugLink: http://bugs.launchpad.net/bugs/686692
[v2: Redid a bit of commit wording and fixed a compile warning]

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-21 11:24:14 -05:00
Randy Dunlap
7d81c3b9e2 xen: fix non-ANSI function warning in irq.c
Fix sparse warning for non-ANSI function declaration:

arch/x86/xen/irq.c:129:30: warning: non-ANSI function declaration of function 'xen_init_irq_ops'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-20 14:52:13 -05:00
Tejun Heo
2ce802f62b lockdep: Move early boot local IRQ enable/disable status to init/main.c
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-20 13:32:33 +01:00
Stephen Rothwell
de23be5f35 xen: export arbitrary_virt_to_machine
Fixes this build error:

 ERROR: "arbitrary_virt_to_machine" [drivers/xen/xen-gntdev.ko] undefined!

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 16:11:12 -08:00
Linus Torvalds
9c4bc1c2be Merge branch 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Fix module linking error.
  xen p2m: clear the old pte when adding a page to m2p_override
  xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
  xen: introduce gnttab_map_refs and gnttab_unmap_refs
  xen p2m: transparently change the p2m mappings in the m2p override
  xen/gntdev: Fix circular locking dependency
  xen/gntdev: stop using "token" argument
  xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
  xen: add m2p override mechanism
  xen: move p2m handling to separate file
  xen/gntdev: add VM_PFNMAP to vma
  xen/gntdev: allow usermode to map granted pages
  xen: define gnttab_set_map_op/unmap_op

Fix up trivial conflict in drivers/xen/Kconfig
2011-01-13 18:46:48 -08:00
Konrad Rzeszutek Wilk
e1b478e4ec xen/p2m: Fix module linking error.
Fixes:
ERROR: "m2p_find_override_pfn" [drivers/block/xen-blkfront.ko] undefined!

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 15:09:16 -05:00
Jeremy Fitzhardinge
87f1d40a70 xen p2m: clear the old pte when adding a page to m2p_override
When adding a page to m2p_override we change the p2m of the page so we
need to also clear the old pte of the kernel linear mapping because it
doesn't correspond anymore.

When we remove the page from m2p_override we restore the original p2m of
the page and we also restore the old pte of the kernel linear mapping.

Before changing the p2m mappings in m2p_add_override and
m2p_remove_override, check that the page passed as argument is valid and
return an error if it is not.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:32:14 -05:00
Stefano Stabellini
9b705f0e98 xen p2m: transparently change the p2m mappings in the m2p override
In m2p_add_override store the original mfn into page->index and then
change the p2m mapping, setting mfns as FOREIGN_FRAME.

In m2p_remove_override restore the original mapping.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11 14:31:53 -05:00