Commit Graph

1135 Commits

Author SHA1 Message Date
Pete Zaitcev
4bc203d997 [PATCH] USB: io_edgeport touch-up
Al Borchers suggested to do this in his review of my previous patch.
I guess that I skipped this initially because of my visceral dislike
of sizeof(data). But in this case it seems well localized.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Timothy Sipples
34ab86e140 [PATCH] airprime.c: add Kyocera Wireless KPC650/Passport support
Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera
Wireless KPC650/Passport EV-DO/1xRTT PC Cards.

Signed-off-by: Timothy Sipples <Timothy.Sipples@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Alan Stern
c5e3b741a3 [PATCH] UHCI: Improve FSBR-off timing
This patch (as707) improves the FSBR operation in uhci-hcd by turning it
off more quickly when it isn't needed.  FSBR puts a noticeable load on a
computer's PCI bus, so it should be disabled as soon as possible when it
isn't in use.  The patch leaves it running for only 10 ms after the last
URB stops using it, on the theory that this should be long enough for a
driver to submit another URB if it wants keep FSBR going.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Alan Stern
e323de46e8 [PATCH] UHCI: remove hc_inaccessible flag
This patch (as706) removes the private hc_inaccessible flag from
uhci-hcd.  It's not needed because it conveys exactly the same
information as the generic HCD_FLAG_HW_ACCESSIBLE bit.

In its place goes a new flag recording whether the controller is dead.
The new code allows a complete device reset to resurrect a dead
controller (although usbcore doesn't yet implement such a facility).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
David Brownell
be3cbc5f87 [PATCH] UHCI: various updates
This patch (as705) contains a small set of updates for uhci-hcd written
mostly by Dave Brownell:

  * Root hub suspend messages come out labeled as root hub messages;
    PCI messages should only come out when the pci device suspends.

  * Rename the reset() method to better match its init() role

  * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub
    suspend/resume errors.

  * When an URB fails, associate the message with the usb device not
    the host controller (it still hides endpoint and direction)

From: David Brownell <david-b@pacbell.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Alan Stern
ae671813af [PATCH] usb-storage: unusual_devs entry for Nikon DSC D70s
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s,
which uses a different Product ID from the D70.  It also moves the entry
for the DSC E2000 up in the list, to preserve the numerical ordering.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Rene Rebe
5c218e3b86 [PATCH] USB: Add Apple MacBook product IDs to usbhid
This adds the Apple MacBook product IDs for the Fn translation
to the usbhid.

Signed-off-by: Rene Rebe <rene@exactcode.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Ralf Baechle
dfbaa7d8a4 [PATCH] USB: EHCI on non-Au1200 build fix
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw
an error is stupid.

From: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Chris Lund
bfd5df3c0c [PATCH] USB: free allocated memory on io_edgeport startup memory failure
While an Edgeport is allocating individual port structures, if kmalloc
returns NULL, the serial structure is freed and -ENOMEM, but the ports
allocated before the failure are not freed.  This patch addresses that
condition.

Signed-off-by: Christopher Lund <docmax@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Matthias Urlichs
14f76cc7ab [PATCH] USB: new devices for the Option driver
This patch extends the "option" driver with a few more devices, some of
which are actually connected to USB the "right" way -- as opposed to
doing it via PCMCIA and OHCI.

Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:16 -07:00
Philippe Retornaz
786dc1d3d7 [PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer
See http://bugzilla.kernel.org/show_bug.cgi?id=6617.

This function dereference a __user pointer.

Signed-off-by: Philippe Retornaz <couriousous@mandriva.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Alan Stern
6ad07129a8 [PATCH] usbcore: recovery from Set-Configuration failure
This patch (as703) improves the error handling when a Set-Configuration
request fails.  The old interfaces are all unregistered before the
request is sent, and if the request fails then we don't know what config
the device is using.  So it makes no sense to leave actconfig pointing
to the old configuration with its invalid interfaces.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Alan Stern
df9a1f482d [PATCH] usbhid: use usb_reset_composite_device
This patch (as702) makes usbhid use the new usb_reset_composite_device
API.  Now HID interfaces can coexist with other interfaces on the same
device, and a reset can safely be requested by any of the drivers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Alan Stern
47104b0dd3 [PATCH] usb-storage: use usb_reset_composite_device
This patch (as701) modifies usb-storage to take advantage of the new
usb_reset_composite_device() API.  Now we will be able to safely request
port resets even if other drivers are bound to a mass-storage device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Alan Stern
7de18d8bf4 [PATCH] USB hub: use usb_reset_composite_device
This patch (as700) modifies the hub driver to take advantage of the new
usb_reset_composite_device API.  The existing code had special-case
calls stuck into usb_reset_device, just before and after the reset.
With the new version there's no need for special-case stuff; it all
happens naturally in the form of pre_reset and post_reset notifications.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Alan Stern
79efa097e7 [PATCH] usbcore: port reset for composite devices
This patch (as699) adds usb_reset_composite_device(), a routine for
sending a USB port reset to a device with multiple interfaces owned by
different drivers.  Drivers are notified about impending and completed
resets through two new methods in the usb_driver structure.

The patch modifieds the usbfs ioctl code to make it use the new routine
instead of usb_reset_device().  Follow-up patches will modify the hub,
usb-storage, and usbhid drivers so they can utilize this new API.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
David Brownell
efcaa20525 [PATCH] USB: cdc_ether: recognize olympus r1000 (fix regression)
Earlier work splitting the "usbnet" driver out into a core plus driver
modules was missing a blacklist entry for the Olympus R-1000; it must
not use the CDC Ethernet driver, only the "zaurus" support works with
it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Eric Sesterhenn
d5ce1379be [PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.c
From: Eric Sesterhenn <snakebyte@gmx.de>

This fixes coverity Bug #390.

With the following code

	ret = ep->branch = balance(isp116x, ep->period, ep->load);
	if (ret < 0)
		goto fail;

the problem is that ret and balance are of the type int, and ep->branch is u16.
so the int balance() returns gets reduced to u16 and then converted to an int again,
which removes the sign. Maybe the following little c program can explain it better:
2006-06-21 15:04:15 -07:00
Jeremy Fitzhardinge
b10cee9d03 [PATCH] USB: Add Sierra Wireless MC5720 ID to airprime.c
Recognize the Sierra Wireless MC5720.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:15 -07:00
Stuart MacDonald
09fd6bc8b4 [PATCH] USB: Whiteheat: fix firmware spurious errors
Attached patch fixes spurious errors during firmware load.

Signed-off-by: Stuart MacDonald <stuartm@connecttech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
akpm@osdl.org
069e8a65cd [PATCH] Driver for Apple Cinema Display
This is a driver to control the brightness of an Apple Cinema Display over
USB.  It updates the local brightness value if the user presses a button on
the display.

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Ian Abbott
eb79b4fda4 [PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1
This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB
product to the ftdi_sio driver's device ID table.  The PID was supplied
by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list.  The
PID 0xE050 matches the Windows INF files for this device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Alan Stern
633a7ecf89 [PATCH] usbhid: Remove unneeded blacklist entries
Now that usbhid automatically applies HID_QUIRK_NOGET to keyboards and
mice, we no longer need the blacklist entries that were present for no
other purpose.  This patch (as698) removes them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Giridhar Pemmasani
3f8f4a18f4 [PATCH] usbcore: Fix broken RNDIS config selection
RNDIS devices don't get configured owing to a typo in
choose_configuration().  This patch from Giridhar Pemmasani fixes the
typo.

From: Giridhar Pemmasani <giri@lmc.cs.sunysb.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Daniel Drake
1fbe75e12f [PATCH] USB: print message when device is rejected due to insufficient power
2.6.16 introduces USB power budgeting in the Linux kernel, and since then, a
fair number of users have observed that some of their devices no longer work in
unpowered hubs (this is not a bug, the devices claim that they need more than
100mA).

The very least we can do is print an informational message to the kernel log
when this happens, otherwise it is not at all clear why the device was not
accepted.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
David Brownell
955a260829 [PATCH] USB: more pegasus log spamming removed
Remove more log spamming from pegasus:  stop talking to the device once we
see ENODEV reported.  It may take a while before khubd notifies us.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Pete Zaitcev
2f8ad9a1b9 [PATCH] USB: rmmod pl2303 after -28
Wait for the scheduled work to finish before freeing memory, prevent oops.
http://bugzilla.kernel.org/show_bug.cgi?id=6596

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:14 -07:00
Dan Streetman
ba47f66bd9 [PATCH] improved TT scheduling for EHCI
This updates the EHCI driver by adding an improved scheduler for the
transaction translators, found in USB 2.0 hubs and used for low and
full speed devices.

 - adds periodic_tt_usecs() and some helper functions, which does
   the same thing that "periodic_usecs" does, except on the other
   side of the TT, i.e.  it calculates the low/fullspeed bandwidth
   usage instead of highspeed.

 - adds a tt_available() function which is the new implementation
   of what tt_no_collision() does ... while tt_no_collision() ensures
   that each TT handles only 1 periodic transfer at a time (a very
   pessimistic approach) this version instead tracks bandwidth and
   allows each TT to handle as many transfers as will fit on each TT's
   downstream bus (closer to best-case).

The new scheduler is selected by a config option, marked as EXPERIMENTAL
so it can be tested (and more broadly reviewed) for a while until it
seems safe to remove the original scheduler.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Franck Bui-Huu
3428cc43d2 [PATCH] usb-storage: get rid of the timer during URB submission
This patch uses completion timeout instead of a timer to implement
a timeout when submitting an URB.

It also put the task in interruptible state instead of an
uninterruptible one while waiting for the completion.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Pete Zaitcev
80b47853b1 [PATCH] USB: Syntax cleanup for pl2303 (trailing backslash)
Remove the silly trailing backslash.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Pete Zaitcev
6f065f70c0 [PATCH] USB: Improve Kconfig comment for mct_u232
Add a couple of supported devices into the help message.

It's a long story... I promised this comment changed to a user long ago,
so I'd like to have that promise kept. In reality though, nobody is
likely to read this anyway.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Pete Zaitcev
cf2c7481d2 [PATCH] USB serial: encapsulate schedule_work, remove double-calling
I'm going to throw schedule_work away, it's retarded. But for starters,
let's have it encapsulated.

Also, generic and whiteheat were both calling usb_serial_port_softint
and scheduled work. Only one was necessary.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Pete Zaitcev
ad93375a30 [PATCH] usb: io_edgeport, cleanup to unicode handling
Clean up the unicode handling in io_edgeport. Make get_string size-limited.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Alan Stern
9da2150f59 [PATCH] usbtest: report errors in iso tests
This patch (as693b) makes the usbtest driver report errors in the
isochronous bulk transfer tests instead of always returning 0.  As an
arbitrary cutoff, an error is returned if more than 10% of the packet
transfers fail.  It also stops a test immediately upon receiving an URB
submission error.

For a test harness, it's especially important to report when errors occur!

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Alan Stern
0ae4ea8092 [PATCH] gadgetfs: fix memory leaks
This patch (as692) fixes a few memory leaks in some unimportant error
pathways of the gadgetfs driver.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:13 -07:00
Alan Stern
83196b5205 [PATCH] gadgetfs: fix AIO interface bugs
This patch (as691) fixes a few errors in the AIO interface for the
gadgetfs driver.  Now requests will complete properly instead of hanging.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Vitja Makarov
212a4b4ed1 [PATCH] USB: new cp2101 device
By the way I have to ask you to add new (vid,pid) pair to cp2101 driver.

This device is argussoft's avr in-system programmer AS3M,
http://atmel.argussoft.ru/hard.htm
it's based on cp2101 chip and works pretty well with the linux driver.

It could be used with argussoft's `asisp1109.exe'
(http://atmel.argussoft.ru/download/software/as-tools.soft/asisp.zip)
tool run under wine.

Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Greg Kroah-Hartman
782a7a632e [PATCH] USB: add usb_interrupt_msg() function for api completeness.
Really just a wrapper around usb_bulk_msg() but now it's documented
much better.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Franck Bui-Huu
caa2a12267 [PATCH] Fix a deadlock in usbtest
ctrl_complete functions acquires ctx->lock and tries to unlink
all queued urbs in case of errors through usb_unlink_urb func.
In its turn usb_unlink_urb calls, through the hcd driver,
usb_hcd_giveback_urb which calls ctrl_complete again. At this
time, ctx->lock is already taken by the same function.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Alan Stern
c8155cc5d8 [PATCH] UHCI: remove ISO TDs as they are used
This patch (as690) does the same thing for ISO TDs as as680 did for
non-ISO TDs: free them as they are used rather than all at once when an
URB is complete.  At the same time it fixes a minor buglet (I'm not
aware of it ever affecting anyone): An ISO TD should be retired when its
frame is over, regardless of whether or not the hardware has marked it
inactive.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Alan Stern
caf3827a65 [PATCH] UHCI: store the period in the queue header
This patch (as689) stores the period for periodic transfers (interrupt
and ISO) in the queue header.  This is necessary for proper bandwidth
tracking (not yet implemented).  It also makes the scheduling of ISO
transfers a bit more rigorous, with checks for out-of-bounds frame
numbers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Alan Stern
10b8e47d6b [PATCH] UHCI: fix race in ISO dequeuing
This patch (as688) fixes a small race in uhci-hcd.  Because ISO queues
aren't controlled by queue headers, they can't be unlinked.  Only
individual URBs can.  So whenever multiple ISO URBs are dequeued, it's
necessary to make sure the hardware is done with each one.  We can't
assume that dequeuing the first URB will suffice to unlink the entire
queue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Alan Stern
c433472658 [PATCH] UHCI: use integer-sized frame numbers
This patch (as687) changes uhci-hcd to keep track of frame numbers as
full-sized integers rather than 11-bit values.  This makes them a lot
easier to handle and makes it possible to schedule beyond a 2-second
window, should anyone ever want to do so.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:12 -07:00
Micah Dowty
3612242e52 [PATCH] USB: Allow high-bandwidth isochronous packets via usbfs
This patch increases an arbitrary limit on the size of
individual isochronous packets submitted via usbfs. The
limit is still arbitrary, but it's now large enough to
support the maximum packet size used by high-bandwidth
isochronous transfers.

Signed-off-by: Micah Dowty <micah@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Micah Dowty
e016683d59 [PATCH] USB: Remove 4088-byte limit on usbfs control URBs
This patch removes the artificial 4088-byte limit that usbfs
currently places on Control transfers. The USB spec does not
specify a strict limit on the size of an entire control transfer.
It does, however, state that the data stage "follows the same
protocol rules as bulk transfers." (USB 2, 8.5.3)

The level of support for large control transfers in real host
controllers varies, but it's important to support at least 4K
transfers. Windows enforces a maximum control transfer size
of 4K, so there exists some hardware that requires a full 4096
byte data stage. Without this patch, we fall short of that by
8 bytes on architectures with a 4K page size, and it becomes
impossible to support such hardware with a user-space driver.

Since any limit placed on control transfers by usbfs would be
arbitrary, this patch replaces the PAGE_SIZE limit with the same
arbitrary limit used by bulk transfers.

Signed-off-by: Micah Dowty <micah@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
b761d9d867 [PATCH] UHCI: Work around old Intel bug
Some old Intel UHCI controllers have a bug that has shown up in a few
systems (the PIIX3 "Neptune" chip set).  Until now there has not been
any simple way to work around the bug, but the lastest changes in
uhci-hcd have made it easy.  This patch (as684) adds the work-around.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
84afddd7ac [PATCH] UHCI: Reimplement FSBR
This patch (as683) re-implements Full-Speed Bandwidth Reclamation (FSBR)
properly.  It keeps track of which endpoint queues have advanced, and
when none have advanced for a sufficiently long time, FSBR is turned
off.  The next TD on each of the non-moving queues is modified to
generate an interrupt on completion, so that FSBR can be re-enabled as
soon as the hardware starts to make some progress.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
04538a255a [PATCH] UHCI: Eliminate the TD-removal list
This patch (as682) gets rid of the TD-removal list in uhci-hcd.  It is
no longer needed because now TDs are not freed until we know the
hardware isn't using them.  It also simplifies the code for adding and
removing TDs to/from URBs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
a0b458b64b [PATCH] UHCI: Move code for cleaning up unlinked URBs
This patch (as681) moves some code for cleaning up after unlinked URBs
out of the general completion pathway into the unlinking pathway.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
59e29ed91c [PATCH] UHCI: Remove non-iso TDs as they are used
This patch (as680) frees non-isochronous TDs as they are used, rather
than all at once when an URB is complete.  Although not a terribly
important change in itself, it opens the door to a later enhancement
that will reduce storage requirements by allocating only a limited
number of TDs at any time for each endpoint queue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
b1869000a6 [PATCH] UHCI: Common result routine for Control/Bulk/Interrupt
This patch (as679) combines the result routine for Control URBs with the
routine for Bulk/Interrupt URBs.  Along the way I eliminated the
debugging printouts for Control transfers unless the debugging level is
set higher than 1.  I also eliminated a long-unused (#ifdef'ed-out)
section that works around some buggy old APC BackUPS devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:11 -07:00
Alan Stern
0f28b55db5 [PATCH] usbhid: automatically set HID_QUIRK_NOGET for keyboards and mice
It seems to be relatively common for USB keyboards and mice to dislike
being polled for reports.  Since there's no need to poll a keyboard or
a mouse, this patch (as685) automatically sets the HID_QUIRK_NOGET flag
for devices that advertise themselves as either sort of device with boot
protocol support.

This won't cure all the problems since some devices don't support the
boot protocol, but it's simple and easy and it should fix quite a few
problems.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Bart Massey
a82e49b8ae [PATCH] USB HID/HIDBP, INPUT DRIVERS: fix various usb/input/hid-input.c bugs that make Apple Mighty Mouse work poorly
Transposed lines of code in drivers/usb/input/hid-input.c causes the
capability bits for a new HID device to be set before quirks are applied
at configuration time.  When an HID event is then sent up to the input
layer, it may then be discarded as irrelevant because the wrong
capability bit is set.

Further, the quirks for the Apple Mighty Mouse are not quite right: the
horizontal scrolling needs its axis reversed, and the left and center
buttons are transposed.  Also, the mouse is labeled in the kernel with
its earlier name (I think) of Apple PowerMouse.

Steps to reproduce problem: Plug in an Apple Mighty Mouse.  Note that
horizontal scrolling doesn't work at all, and in fact doesn't generate
any input events on /dev/input/eventN.  Note also that pushing the
middle button performs the right button action, and vice versa.  Once
you have the horizontal scrolling working, note that it is backward WRT
both to vertical scrolling and to common sense.

This patch maybe should be broken up, as it does address two problems.
The transposed code in hidinput_configure_usage() probably creates bugs
beyond just the Mighty Mouse.  The rest of the patch renames POWERMOUSE
to MIGHTYMOUSE everywhere (which I *believe* is correct), fixes the
MIGHTYMOUSE quirk to swap the center and right mouse buttons, and adds a
new quirk HID_QUIRK_INVERT_HWHEEL also assigned to the MIGHTYMOUSE with
code in hidinput_hid_event() to implement it.

Signed-off-by: Bart Massey <bart@cs.pdx.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Alan Stern
2775562ad2 [PATCH] USB: UHCI: fix obscure bug in enqueue()
This patch (as676) fixes a small bug in uhci-hcd's enqueue routine.  When
an URB is unlinked or gets an error and the completion handler queues
another URB for the same endpoint, the queue shouldn't be allowed to start
up again until the handler returns.  Not even if the new URB is the only
one on its queue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Alan Stern
4de7d2c231 [PATCH] USB: UHCI: store the endpoint type in the QH structure
This patch (as675) simplifies uhci-hcd slightly by storing each endpoint's
type in the corresponding Queue Header structure.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Alan Stern
2d61bde7a0 [PATCH] USB: net2280: add a shutdown routine
The net2280 board has an annoying habit of surviving soft reboots with
interrupts enabled.  This patch (as674) adds a shutdown routine to the
driver so that the board can be put in a quiescent state.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Daniel Drake
b383539e04 [PATCH] USB: usb-storage alauda: Fix transport info mismerge
Unfortunately it looks like the transport entry for this subdriver was merged
into the protocol section, making this driver unusable :(

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Daniel Drake
f9347c5234 [PATCH] USB shuttle_usbat: hardcode flash detection for now
After some further testing with my flash device I realised that our current
probe doesn't always work (e.g. when no media is inserted).

Now that Peter Chubb's patch has simplified the detection of 99% of the HP CD
writers out there, we have a much smaller range of hardware to work with on
the shared device ID, so it should be possible to try some of the previous
probe options again: we just need to find another tester with a USBAT2-based HP
CD writer.

This patch hardcodes the flash detection until someone comes along with one of
these obscure CD drives. Note that these devices are extremely rare, so even if
we can't ever find a decent probe method, at least we will be supporting almost
all of the USBAT-based hardware out there.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Peter Chubb
bdcfd9e349 [PATCH] USB: shuttle_usbat: Hardcode detection of HP CDRW devices
Use USB vendor and product IDs to determine whether the attached
device is a CDROM or a Flash device.  Daniel Drake says that the
*same* vendor and product IDs for non-HP vendor ID could be either
flash or cdrom, so try to probe for them.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Peter Chubb
141804d401 [PATCH] USB: shuttle_usbat: Fix handling of scatter-gather buffers
I've worked out what's going wrong.  The scsi layer is now much
more likely to pass down scatterlists instead of plain buffers.  So
you have to make sure that they're handled correctly.  In one of the
changes along the way, usbat_write_block and friends stopped obeying
the srb->use_sg flag.

Anyway, with the appended patch, and the one I'm putting in the next email, it
all seems to work for the HP cd4e.  Of course, someone's going to have
to test it with the flash drives as well....

This patch teaches the usbat_{read,write}_block functions to
obey the use_sg flag in the scsi-request.

Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Sean Young
69165c29bb [PATCH] USB Phidget InterfaceKit: make inputs pollable and new device support
Make inputs pollable using sysfs_notify and add support for the Phidget
InterfaceKit 0/16/16. Various cleanups.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Saakes <daniel@saakes.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:10 -07:00
Duncan Sands
a01c4ef1cc [PATCH] USBATM: remove no-longer needed #include
We #include <linux/netdevice.h> only because <linux/etherdevice.h>
needed it, but didn't #include it itself.  But that's been fixed now.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Duncan Sands
fcf4830a52 [PATCH] USBATM: remove pointless inline
Remove pointless inline.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Alan Stern
4489a5712b [PATCH] USB: usbcore: always turn on hub port power
Some hubs claim not to support port-power switching, and right now the
hub driver believes them and does not enable power to their ports.
However it turns out that even though they don't actually switch power,
they do ignore all events on a port until told to turn on the power!
This problem has been reported by several users.

This revised patch (as672b) makes the hub driver always try to turn on
port power to all hubs, regardless of what the hub descriptor says.  It
also adds a comment explaining the need for this.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Nicolas Boichat
9effa978f1 [PATCH] USB: MacBook Pro touchpad support
Add support for MacBook touchpad in appletouch driver.
Thanks to Alex Harper for the informations.

Use u16 instead of int16_t in atp_is_geyser* functions.

Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Guennadi Liakhovetski
73e487fdb7 [PATCH] USB console: fix disconnection issues
Prevent sending further output to a USB-serial console after the dongle is
disconnected, take care not to leak kref.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Paul Fulghum
ca85485c1f [PATCH] USB: console: prevent ENODEV on node
Prevent ENODEV on a /dev/ttyUSBx, used as a USB-serial console.

From: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Guennadi Liakhovetski
57845bd104 [PATCH] USB: console: fix oops
Prevent NULL dereference when used as a USB-serial console.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Paul Fulghum
c10746dbb3 [PATCH] USB: console: fix cr/lf issues
Append Carriage-Returns after Line-Feeds, analogous to the serial driver.

From: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Kumar Gala
01cced2507 [PATCH] USB: allow multiple types of EHCI controllers to be built as modules
In some systems we may have both a platform EHCI controller and PCI EHCI
controller.  Previously we couldn't build the EHCI support as a module due
to conflicting module_init() calls in the code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:09 -07:00
Adrian Bunk
df47e5330b [PATCH] USB: sisusbvga: possible cleanups
This patch contains the following possible cleanups:
- make needlessly global functions static
- function and struct declarations belong into header files
- make SiS_VCLKData const
- #if 0 the following unused global functions:
  - sisusb.c: sisusb_writew()
  - sisusb.c: sisusb_readw()
  - sisusb_init.c: SiSUSB_GetModeID()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Arjan van de Ven
2682d27c58 [PATCH] USB: convert the semaphores in the sisusb driver to mutexes
From: Arjan van de Ven <arjan@infradead.org>

Convert the semaphores-used-as-mutex to mutexes in the sisusb video driver;
this required manual checking due to the "return as locked" stuff in this
driver, but the ->lock semaphore is still used as mutex in the end.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Cc: Thomas Winischhofer <winischhofer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Eduard Warkentin
7327413c74 [PATCH] USB: added support for ASIX 88178 chipset USB Gigabit Ethernet adaptor
Add support for detection and dworking with a ASIX 88178 based USB-Gigabit
adaptor.  With the patch, it is detected and handled correctly by the asix
module.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
David Brownell
f44f725f7d [PATCH] USB: usbnet, zaurus mtu fixup
This includes an MTU fixup which could affect larger packets with newer
Zaurii, described as http://bugzilla.kernel.org/show_bug.cgi?id=6286;
plus minor whitespace cleanup.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Oliver Neukum
86478944eb [PATCH] USB: cdc-acm: add a new special case for modems with buggy firmware
this fixes the "duplicated text" bug. There's a modem that cannot cope
with large transfers and more than one urb in flight. This patch adds a
special case to the driver.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Henk Vergonet
5cd330f4f3 [PATCH] USB: add YEALINK phones to the HID_QUIRK_IGNORE blacklist
Keys on Yealink based phones will not function properly when using the
generic HID driver. This patch prevents the generic HID code from
grabbing the device before the regular yealink driver can get a grip on
it.

Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Paul Serice
c32ba30f76 [PATCH] USB: EHCI works again on NVidia controllers with >2GB RAM
From: Paul Serice <paul@serice.net>

The workaround in commit f7201c3dcd
broke.  The work around requires memory for DMA transfers for some
NVidia EHCI controllers to be below 2GB, but recent changes have
caused some DMA memory to be allocated before the DMA mask is set.

Signed-off-by: Paul Serice <paul@serice.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 15:04:08 -07:00
Linus Torvalds
28e4b22495 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)
2006-06-21 11:18:25 -07:00
Trond Myklebust
d59bf96cdd Merge branch 'master' of /home/trondmy/kernel/linux-2.6/ 2006-06-20 08:59:45 -04:00
David S. Miller
c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
Jeff Garzik
b5ed7639c9 Merge branch 'master' into upstream 2006-06-13 20:29:04 -04:00
James Bottomley
f0cd91a68a Merge ../linux-2.6 2006-06-10 13:47:26 -05:00
Trond Myklebust
1f5ce9e93a VFS: Unexport do_kern_mount() and clean up simple_pin_fs()
Replace all module uses with the new vfs_kern_mount() interface, and fix up
simple_pin_fs().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-06-09 09:34:16 -04:00
Richard Purdie
0c27c5d5b9 [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget
Patch from Richard Purdie

Add a power budget variable to the PXA OHCI platform data and add a
default value for the spitz platform(s) which prevents known failures
with certain USB devices.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08 22:44:07 +01:00
Christoph Hellwig
5d5ff44fe6 [SCSI] fix up request buffer reference in various scsi drivers
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their
queuecommand functions.  Those fields are internal storage for the
midlayer only and are used to restore the original payload after
request_buffer and request_bufflen have been overwritten for EH.  Using
the buffer and bufflen fields means they do very broken things in error
handling.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06 11:07:25 -04:00
Pavel Machek
5c601d0c94 [PATCH] wireless: move zd1201 where it belongs
zd1201 is wifi adapter, yet it is hiding in drivers/usb/net where
noone can find it. This moves Kconfig/Makefile zd1201 to the right
place.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05 16:13:30 -04:00
Pavel Machek
2a80634031 [PATCH] usb wifi: zd1201 cleanups
Cleanup coding style and other small stuff in zd1201. No real code
changes.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05 15:34:18 -04:00
Anssi Hannula
3cbd5b32cb Input: fix accuracy of fixp-arith.h
Add the value of cos(90) = 0 to the table.  This also moves the results so
that sin(x) == sin(180-x) is true as expected.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-05 00:18:43 -04:00
Micon, David
48d705522d [PATCH] HID read busywait fix
Make a read of a HID device block until data is available.  Without it, the
read goes into a busy-wait loop until data is available.

Cc: Greg KH <greg@kroah.com>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-21 12:59:17 -07:00
Greg Kroah-Hartman
df3fccb14a [PATCH] USB: fix omninet driver bug
I introduced this way back in 2.6.13 when adding the port lock logic.
This device talks out through different "ports" all at the same time, so
the lock logic was wrong, preventing any data from ever being sent
properly.

Thanks a lot to Bernhard Reiter <bernhard@intevation.de> for being
patient and helping with debugging this.

Cc: Bernhard Reiter <bernhard@intevation.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:10 -07:00
Greg Kroah-Hartman
815ddc99dd [PATCH] USB: add ark3116 usb to serial driver
Based on Simon's original driver, with some minor code cleanups and
tidying by me.

Cc: Simon Schulz <simon@auctionant.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:09 -07:00
Luiz Fernando Capitulino
71a84163ca [PATCH] usbserial: Fixes leak in serial_open() error path.
If serial_open() fails at the port assignment or mutex_lock_interruptible()
is interrupted, the 'serial' object will never be freed.

We should call kref_put() when those errors happens.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:09 -07:00
Luiz Fernando Capitulino
704936a25b [PATCH] usbserial: Fixes use-after-free in serial_open().
If the device is disconnected while serial_open() is executing and
either try_module_get() or the device specific open function fails, the
kref_put() call in the 'bailout_kref_put' label will free the memory
pointed out by 'port'.

The subsequent dereferences in the 'bailout_kref_put' label will be
invalid.

The fix is just to assure kref_put() is called after any 'port' usage.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:09 -07:00
Monty
16c23f7d88 [PATCH] USB: Emagic USB firmware loading fixes
It's become apparent as machines get faster that the emagic kernel firmware
loaders (based on the ezusb loader) have a reset race.  a 400MHz TiBook
never tripped it, but a 2GHz Pentium M seems to hit it about 30% of the
time.  The bug is seen as a hung USB box and the kernel error:

drivers/usb/misc/emi62.c: emi62_load_firmware - error loading firmware:
error = -110

The patch below inserts a delay after deasserting reset to allow the box to
settle before a new command is issued.  This affects only device startup.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:09 -07:00
Olaf Hering
332bbf6138 [PATCH] USB: add an IBM USB keyboard to the HID_QUIRK_NOGET blacklist
After recent changes, the USB keyboard as shipped with IBM pSeries systems
does not work anymore, unless the keyboard is replugged after reboot.
Adding this model to the blacklist fixes it.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:09 -07:00
Ken Brush
b68f7de02a [PATCH] USB: Add Sieraa Wireless 580 evdo card to airprime.c
This adds the Sierra Wireless card to airprime.c.

I tested this on my laptop.

Signed-off-by: Ken Brush <ken@cgi101.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-12 11:58:08 -07:00
Razvan Gavril
72a9f95842 [PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interface
Signed-off-by: Razvan Gavril <razvan.g@plutohome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:56 -07:00
Ian Abbott
20a0f47e18 [PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID Reader
This patch adds support for ACG Identification Technologies GmbH's HF
Dual ISO Reader (an RFID tag reader) to the ftdi_sio driver's device ID
table.  The product ID was supplied by anotonios (anton at goto10 dot
org) on the ftdi-usb-sio-devel list and subsequently verified by myself
(Ian Abbott).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:55 -07:00
Alan Stern
436f5762bc [PATCH] USB: usbcore: don't check the device's power source
The choose_configuration() routine contains code the determine the
device's power source, so that configurations requiring external power
can be ruled out if the device is running on bus power.  Unfortunately
it turns out that some devices have errors in their config descriptors
and other devices don't like the GET_DEVICE_STATUS request.

Since that information wasn't used for anything else, this patch (as673)
removes the code, leaving only a comment.  It fixes bugzilla entry
#6448.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:55 -07:00
David Brownell
db4cefaaea [PATCH] USB: fix OHCI PM regression
This fixes a small regression in USB controller power usage for many
OHCI controllers, notably including every non-PCI version of OHCI:  on
those systems, the runtime autosuspend mechanism is no longer enabled.

The change moves to saner defaults.  All root hubs are expected to handle
remote wakeup (and hence autosuspend), although drivers for buggy silicon
may override that default.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:55 -07:00
David Brownell
7e713b8256 [PATCH] USB: pegasus fixes (logstorm, suspend)
Teach "pegasus" to handle a few of the disconnect fault paths
without hundreds of usless syslog messages.

Handle the carrier check workqueue entry even if the driver has
not been opened.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:55 -07:00
Duncan Sands
6275cdfa0f [PATCH] USBATM: fix modinfo output
Because of the way stringify works, using an expression
like 64 * 1024 for UDSL_MAX_BUF_SIZE results in 64 * 1024
turning up in the modinfo output instead of 65536.  So use
65536 directly (this was the only way I found of fixing this).

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
Duncan Sands
67c752b41a [PATCH] USBATM: change the default speedtouch iso altsetting
The maximum possible bandwidth for a speedtouch modem is about 7Mbaud.
You can only get this by using isochronous urbs (enable_isoc=1) and
altsetting 3.  With the current default altsetting of 2, the modem
maxes out at about 4Mbaud.  So change the default altsetting to 3
when using isochronous urbs.  It would be nice to base the altsetting
on the detected line speed, but that's hard given the current design.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
David Brownell
839ab1d4ce [PATCH] USB: fix bug in ohci-hcd.c ohci_restart()
A loop on a power-lost resume path used the wrong index.
I suspect khubd has been working around such bugs.
Noticed by Andreas Mohr <andi@rhlx01.fht-esslingen.de>.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-08 23:43:54 -07:00
Ian Abbott
7e0258fd28 [PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card reader
This patch adds support for an ASK RDR 400 series contactless card
reader <http://www.ask.fr/uk/products_and_services/terminals.html> to
the ftdi_sio driver's device ID table.  The product ID was supplied by
Adriano Couto on the ftdi-usb-sio-devel list.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:59 -07:00
Luiz Fernando N. Capitulino
69737dfaac [PATCH] USB: ftdi_sio: Adds support for iPlus device.
Adds support in ftdi_sio usbserial driver for USB modems sold by
Plus GSM Company in Poland.

Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:59 -07:00
Nathan Bronson
cdd3b1565a [PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB
This patch adds recognition of the RR-CirKits LocoBuffer USB
to the existing FTDI driver.  http://www.rr-cirkits.com

Signed-off-by: Nathan Bronson <ngb@sns-usa.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:59 -07:00
Jean Delvare
c67808eee6 [PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* defines
We could use the recently added PCI_CLASS_SERIAL_USB_UHCI,
PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in
more places, for slightly shorter and clearer code.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:59 -07:00
Alan Stern
9fb81ce636 [PATCH] USB: net2280: set driver data before it is used
This patch (as671) fixes a bug in the error pathway for the net2280
probe routine.  A failure during probe will cause the driver to call
pci_get_drvdata before the corresponding pci_set_drvdata has been set.
The patch also does a kzalloc conversion.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:58 -07:00
Alan Stern
658ad5e001 [PATCH] USB: net2280: check for shared IRQs
This patch (as670) adds a check for whether a shared IRQ was actually
generated by the net2280 device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:58 -07:00
Alan Stern
317e83b842 [PATCH] USB: net2280: send 0-length packets for ep0
This patch (as669) fixes a bug in the net2280 driver.  Now it will
properly send zero-length packets on ep0 until the control status stage
occurs.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:58 -07:00
Alan Stern
a29fccd799 [PATCH] USB: net2280: Handle STALLs for 0-length control-IN requests
This patch (as668) fixes a typo in net2280.  The handler for 0-length
control-IN requests should check that the endpoint _isn't_ halted before
sending a 0-length packet.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:58 -07:00
Olivier Blondeau
f430c405ca [PATCH] USB: storage: atmel unusual dev update
Originally submitted by Olivier Blondeau <zeitoun@gmail.com>, with re-diffing
by me. Adds a new atmel unusual_dev entry.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
2006-04-27 10:28:58 -07:00
Phil Dibowitz
2120638354 [PATCH] USB: Storage: unusual devs update
This patch removes the Protocol portion of the Iomega Click! device as it's not
needed. Not-needed message reported by Kenneth Crudup <kenny@panix.com>

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:57 -07:00
Wang Jun
5838171984 [PATCH] USB: add new iTegno usb CDMA 1x card support for pl2303
Add new iTegno usb CDMA 1x card (usbid '0eba:2080') support to pl2303 driver

Signed-off-by: Wang Jun <wangjun1974@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:57 -07:00
Jesper Juhl
67ca0284f6 [PATCH] USB: Resource leak fix for whiteheat driver
We may return from drivers/usb/serial/whiteheat.c::whiteheat_attach()
without freeing `result' if we leave via the no_firmware: label.

Spotted by the coverity checker as #670

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27 10:28:57 -07:00
Al Viro
c82ffb07cd [PATCH] fix leak in activate_ep_files()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-26 07:52:21 -07:00
Randy Dunlap
66e0a9888b [PATCH] isd200: limit to BLK_DEV_IDE
Limit USB_STORAGE_ISD200 to whatever BLK_DEV_IDE and USB_STORAGE
are set to (y, m) since isd200 calls ide_fix_driveid() in the
BLK_DEV_IDE code.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-17 14:24:57 -07:00
Linus Torvalds
754a264c42 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (158 commits)
  commit 4f705ae3e9
  Author: Bjorn Helgaas <bjorn.helgaas@hp.com>
  Date:   Mon Apr 3 17:09:22 2006 -0700
  
      [PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/
      
      dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64.
      Currently all three arches compile it from arch/i386, which means that ia64
      and x86_64 depend on things in arch/i386 that they wouldn't otherwise care
      about.
      
      This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing
      trailing whitespace) and the associated Makefile changes.  All three
      architectures already set CONFIG_DMI in their top-level Kconfig files.
      
      Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
      Cc: Andi Kleen <ak@muc.de>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Andrey Panin <pazke@orbita1.ru>
      Signed-off-by: Andrew Morton <akpm@osdl.org>
  ...
2006-04-14 17:07:57 -07:00
Andrew Morton
0266949205 [PATCH] pm: print name of failed suspend function
Print more diagnostic info to help identify the source of power management
suspend failures.

Example:

usb_hcd_pci_suspend(): pci_set_power_state+0x0/0x1af() returns -22
pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x11b() returns -22
suspend_device(): pci_device_suspend+0x0/0x34() returns -22

Work-in-progress.  It needs lots more suspend_report_result() calls sprinkled
everywhere.

Cc: Patrick Mochel <mochel@digitalimplant.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:41:25 -07:00
Greg Kroah-Hartman
f9814802df [PATCH] USB: add driver for funsoft usb serial device
Cc: David Clare <david@funsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:27 -07:00
Paul Fulghum
69a4bf7c95 [PATCH] USB: remove __init from usb_console_setup
This prevents an Oops if booted with "console=ttyUSB0" but without a
USB-serial dongle, and plugged one in afterwards.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:27 -07:00
Tomasz Kazmierczak
e853bf4af3 [PATCH] USB: pl2303: added support for OTi's DKU-5 clone cable
This patch adds support for a clone of Nokia DKU-5 cable made by
Ours Technology Inc for Nokia phones with PopPort (Nokia 3100 and others).
The cable uses PL2303 USB-to-serial converter from Prolific Technology Inc.

Signed-off-by: Tomasz Kazmierczak <tomek.fizyk@op.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:27 -07:00
Ben Dooks
3799c40189 [PATCH] USB: S3C2410: use clk_enable() to ensure 48MHz to OHCI core
Get the "usb-bus" clock and ensure it is enabled
when the OHCI core is in use.

It seems that a few bootloaders do not enable the
UPLL at startup, which stops the OHCI core having
a 48MHz bus clock. The improvements to the clock
framework for the s3c24xx now allow the USB PLL
to be started and stopped when being used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:26 -07:00
Jeffrey Vandenbroucke sign
bfb25849f0 [PATCH] hid-core.c: fix "input irq status -32 received" for Silvercrest USB Keyboard
When not using this patch, the kernel will continuously return "input irq
status -32 received", while making the keyboard unusable.  This can be
easely resolved using HID_QUIRK_NOGET.  Vendor-ID and Device-ID should be
applied to hid-core.c, and making an entry to make use of it.

Signed-off-by: Jeffrey Vandenbroucke <jeffrey@wirehead.be>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:26 -07:00
Alan Stern
8e32640672 [PATCH] USB: UHCI: don't track suspended ports
Someone recently posted a bug report where it turned out that uhci-hcd
was disagreeing with the UHCI controller over whether or not a port was
suspended: The driver thought it wasn't and the hardware thought it was.
This patch (as665) fixes the problem and simplifies the driver by
removing the internal state-tracking completely.  Now the driver just
asks the hardware whether a port is suspended.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:26 -07:00
Michael Downey
01e8950635 [PATCH] USB: keyspan-remote bugfix
Signed-off-by: Michael Downey <downey@zymeta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:26 -07:00
David Hollis
48b1be6ac0 [PATCH] USB: Rename ax8817x_func() to asix_func() and add utility functions to reduce bloat
Now that the ASIX code is supporting more than just the AX88172 devices,
make the utility function names more generic: ax8817x_func -> asix_func.
Functions that are chip specific now indicate as such: ax88772_func.

Additionally, pull some common routines used in initialization and such
into simple functions to reduce the verbosity of certain functions such
as
the bind() routines and to make the error handling consistent across the
board.

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:25 -07:00
Pete Zaitcev
9fc4831cc3 [PATCH] USB: linux/usb/net2280.h common definitions
Move common definitions for NET2280 to <linux/usb/net2280.h>, so that I can
use them in prism54usb (it is not merged yet, but I plan to do it soon).

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:25 -07:00
David Brownell
e1394b49ee [PATCH] USB: g_ether, highspeed conformance fix
Be sure to record the peripheral's ep0 maxpacket size BEFORE using
that to initialize the (high speed) device qualifier; that helps a
lot with USBCV testing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:25 -07:00
David Brownell
8b52490193 [PATCH] USB: usbtest: scatterlist OUT data pattern testing
Previously, scatterlist tests didn't write patterned data.  Given how many
corner cases are addresed by them, this was a significant gap in Linux-USB
test coverage.  Moreover, when peripherals checked for correct data patterns,
false error reports would drown out the true ones.

This adds the pattern on the way OUT from the host, so scatterlist tests can
now be used to uncover bugs like host TX or peripheral RX paths failing for
back-to-back short packets.  It's easy enough to get an error there with at
least one of the {DMA,PIO}{RX,TX} code paths, or run into hardware races
that need to be defended against.

Note this patch doesn't add checking for correct data patterns on the way
IN from peripherals, just a FIXME for later.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:25 -07:00
David Brownell
68ba61b89c [PATCH] USB: at91 usb driver supend/resume fixes
AT91: the two USB drivers (OHCI, UDC) got out of sync with various
usbcore and driver model PM updates; fix.

Also minor fixes to ohci:  whitespace/style, MODULE_ALIAS so coldplug works
using /sys/.../modalias, and turn off _both_ clocks during suspend.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:25 -07:00
David Brownell
35fcca442a [PATCH] USB: gadget zero poisons OUT buffers
Fill OUT buffers with 0x55 before RX, so that controller driver
bugs that mangle data can be more readily detected during testing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
984163338a [PATCH] USB: gadgetfs highspeed bugfix
This catches up to a change in the Kconfig support for highspeed modes;
the change predated 2.6.10, and anyone using gadgetfs on a highspeed
device would see the kernel wrongly reject the alternate descriptors.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
51400f1d6e [PATCH] USB: rndis_host whitespace/comment updates
This adds a "avoid proprietary protocols" warnoff, identifying several
of the known deficiencies in Microsoft's excuse-for-specification, and
fixes some whitespace bugs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
68dcc688d1 [PATCH] USB: net2280 short rx status fix
Some patch broke short-OUT packet handling for net2280, making it report
illegal status values.  This updates the status code so it's correct.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
42795410c3 [PATCH] USB: fix gadget_is_musbhdrc()
I submitted the wrong version of the patch teaching about the driver
for Mentor's Highspeed Dual Role Controller (HDRC), whoops!  This
uses the right name for that driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:24 -07:00
David Brownell
89ccbdc91b [PATCH] USB: otg hub support is optional
USB OTG devices are not required to support external hubs.  This adds a
configuration option to disable that support.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:23 -07:00
matthieu castet
4d45e21867 [PATCH] USB: UEAGLE : memory leack fix
this patch fix leak of memory allocated to intr if allocation of
sc->urb_int fails.
Found by the Coverity checker.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:23 -07:00
matthieu castet
584958c3d2 [PATCH] USB: UEAGLE : null pointer dereference fix
this patch fix potential null pointer dereference.  Found by the
Coverity checker.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:23 -07:00
matthieu castet
22fcceb546 [PATCH] USB: UEAGLE : support geode
- increase ack timeout for slow system (geode 233MHz where HZ=100)
- reset the cmv ack flag when rebooting

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:23 -07:00
matthieu castet
2a99b50719 [PATCH] USB: UEAGLE : cosmetic
- improve debug trace in order to make easy to solve user problems.
- indent some code
- increase version number

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:23 -07:00
Adrian Bunk
87ed0aeba8 [PATCH] USB: drivers/usb/core/: remove unused exports
This patch removes the following unused EXPORT_SYMBOL's:
- hub.c: usb_set_device_state
- usb.c: usb_alloc_dev
- usb.c: usb_disconnect

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:22 -07:00
Petko Manolov
016534cffc [PATCH] USB: pegasus driver bugfix
Attached is a patch that fixes nasty bug, which i am afraid was there
for a long time.  It was spotted by Andre Draszik <kernel@andred.net>.

From: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:22 -07:00
Ping Cheng
999a6a6a2a [PATCH] USB: add new wacom devices to usb hid-core list
This patch adds support for DTF 521, Intuos3 12x12 and 12x19

Signed-off-by: Ping Cheng <pingc@wacom.com>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:22 -07:00
Ping Cheng
7d3fe085f9 [PATCH] USB: wacom tablet driver update
This patch adds support for DTF 521, Intuos3 12x12, and 12x19;
           fixes minor data report bugs.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:22 -07:00
Alan Stern
aafe5bd6ec [PATCH] USB: g_file_storage: use module_param_array_named macro
Randy Dunlap pointed out that there now is a module_param_array_named
macro available.  This patch (as666) updates g_file_storage to make use of
it.  It also adds a comment listing the specifications documents used in
the design of the driver's SCSI operation (at Pat LaVarre's request).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:21 -07:00
Daniel Ritz
5e32b5767f [PATCH] usb/input: remove Kconfig entries of old touchscreen drivers in favour of usbtouchscreen
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:21 -07:00
Daniel Ritz
1d3e20236d [PATCH] USB: usbtouchscreen: unified USB touchscreen driver
A new single driver for various USB touchscreen devices. It currently
supports:
- eGalax TouchKit
- PanJit TouchSet
- 3M/Microtouch
- ITM Touchscreens

Support for the diffent devices can be enabled/disable when CONFIG_EMBEDDED
is set.

Sizes for comparision:
   text    data     bss     dec     hex filename
   2942     724       4    3670     e56 touchkitusb.ko
   2647     660       0    3307     ceb mtouchusb.ko
   2448     628       0    3076     c04 itmtouch.ko
   4145    1012      12    5169    1431 usbtouchscreen.ko

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:21 -07:00
Folkert van Heusden
62a13db346 [PATCH] USB: add support for Papouch TMU (USB thermometer)
This patch adds support for new vendor (papouch) and one of their
devices - TMU (a USB thermometer).

More information:
vendor homepage:
	http://www.papouch.com/en/
product homepage (Polish):
	http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188

This patch is based on the submission from Folkert van Heusden [1].
Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert.

[1]	http://article.gmane.org/gmane.linux.kernel/392970
[2]	http://article.gmane.org/gmane.linux.kernel/393386

Signed-off-by: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:21 -07:00
Adrian Bunk
fb9ac9bda9 [PATCH] USB: input/: proper prototypes
This patch adds proper prototypes in a header file for some global
functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:20 -07:00
Adrian Bunk
75e2df603d [PATCH] USB: pci-quirks.c: proper prototypes
This patch adds a header file with proper prototypes for two functions
in drivers/usb/host/pci-quirks.c.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:20 -07:00
Luiz Fernando Capitulino
1ce7dd26e0 [PATCH] USB serial: Converts port semaphore to mutexes.
The usbserial's port semaphore used to synchronize serial_open()
and serial_close() are strict mutexes, convert them to the mutex
implementation.

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:20 -07:00
Alan Stern
14cd5f8e85 [PATCH] USB: g_file_storage: add comment about buffer allocation
This patch (as664) adds a comment to file_storage.c, noting that the
driver is slightly non-portable because it assumes that a buffer
allocated for a bulk-in endpoint will also be useable for a bulk-out
endpoint.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:20 -07:00
Alan Stern
70ffe6e14d [PATCH] USB: g_file_storage: Set short_not_ok for bulk-out transfers
I'm told that some UDC hardware may work better if it knows that
receiving a short packet should always cause an error.  Accordingly,
this patch (as663) sets the short_not_ok flag for bulk-out transfers in
g_file_storage.  Oddly enough, there are no circumstances where that
driver can legally receive a shorter-than-expected bulk-out packet.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:20 -07:00
Ian Abbott
7e1c0b86ac [PATCH] USB: ftdi_sio: add support for Eclo COM to 1-Wire USB adapter
This patch adds support for the Eclo COM to 1-Wire USB adapter
<http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the
ftdi_sio driver's device ID table.  Details were provided by Martin
Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott)
confirmed it matched the INF file in the Eclo's Windows driver package.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:19 -07:00
Ben Dooks
f096e0434c [PATCH] USB: cleanups for ohci-s3c2410.c
Fix compile errors due to functions not being
defined static

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:12:19 -07:00
Guennadi Liakhovetski
950ee4c8f0 [PATCH] USB: net2282 and net2280 software compatibility
Below is a patch to gadgets/net2280.[ch] which adds support for the
net2282 controller. The original code was kindly provided by PLX
Technology, I just merged it with the current net2280 driver in the
kernel. Tested on 2.6.15.6, but only with 2282. I did the merge, so
that the behaviour for the 2280 is unaffected (except for short delays
for extra checks).

Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Support for net2282 in net2280 driver.
2006-04-14 11:12:19 -07:00
Matthias Urlichs
6dde432553 [PATCH] Overrun in option-card USB driver
Since the arrays are declared as in_urbs[N_IN_URB]
and out_urbs[N_OUT_URB], both for loops go one
over the end of the array. This fixes coverity id #555.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:24:15 -07:00
Linus Torvalds
86dca4f8e6 Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (33 commits)
  [PATCH] pcmcia: declare pccard_iodyn_ops (fix m8xx_pcmcia.c compilation error)
  [PATCH] pcmcia: fix pcmcia_device_remove oops
  [PATCH] pcmcia: Add support for Possio GCC AKA PCMCIA Siemens MC45
  [PATCH] pcmcia: pseudo device handling update
  [PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present
  [PATCH] pcmcia: use bitfield instead of p_state and state
  [PATCH] pcmcia: remove unused p_dev->state flags
  [PATCH] pcmcia: make pcmcia_release_{io,irq} static
  [PATCH] pcmcia: add return value to _config() functions
  [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
  [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
  [PATCH] pcmcia: rename pcmcia_device.state
  [PATCH] pcmcia: remove unneeded Vcc pseudo setting
  [PATCH] pcmcia: remove export of pcmcia_release_configuration
  [PATCH] pcmcia: default suspend and resume handling
  [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
  [PATCH] pcmcia: add pcmcia_disable_device
  [PATCH] serial_cs: add Merlin U630 IDs
  [PATCH] pcmcia: AT91RM9200 Compact Flash driver
  [PATCH] pcmcia: socket.functions starts with 1
  ...
2006-04-02 12:49:59 -07:00
Dmitry Torokhov
95d465fd75 Manual merge with Linus.
Conflicts:
	arch/powerpc/kernel/setup-common.c
	drivers/input/keyboard/hil_kbd.c
	drivers/input/mouse/hil_ptr.c
2006-04-02 00:08:05 -05:00
Dominik Brodowski
e2d4096365 [PATCH] pcmcia: use bitfield instead of p_state and state
Instead of the two status values struct pcmcia_device->p_state and state,
use descriptive bitfields. Most value-checking in drivers was invalid, as
the core now only calls the ->remove() (a.k.a. detach) function in case the
attachement _and_ configuration was successful.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:33 +02:00
Dominik Brodowski
15b99ac172 [PATCH] pcmcia: add return value to _config() functions
Most of the driver initialization isn't done in the .probe function, but in
the internal _config() functions. Make them return a value, so that .probe
can properly report whether the probing of the device succeeded or not.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:26:06 +02:00
Dominik Brodowski
fba395eee7 [PATCH] pcmcia: remove dev_link_t and client_handle_t indirection
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now.
Therefore, remove all such indirections.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:21:06 +02:00
Dominik Brodowski
fd238232cd [PATCH] pcmcia: embed dev_link_t into struct pcmcia_device
Embed dev_link_t into struct pcmcia_device(), as they basically address the
same entity. The actual contents of dev_link_t will be cleaned up step by step.
This patch includes a bugfix from and signed-off-by Andrew Morton.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:57 +02:00
Dominik Brodowski
70294b4683 [PATCH] pcmcia: remove unneeded Vcc pseudo setting
As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:55 +02:00
Dominik Brodowski
8661bb5b4a [PATCH] pcmcia: default suspend and resume handling
In all but one case, the suspend and resume functions of PCMCIA drivers
contain mostly of calls to pcmcia_release_configuration() and
pcmcia_request_configuration(). Therefore, move this code out of the
drivers and into the core.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:52 +02:00
Dominik Brodowski
50db3fdbbc [PATCH] pcmcia: convert remaining users of pcmcia_release_io and _irq
Convert the remaining drivers which use pcmcia_release_io or
pcmcia_release_irq, and remove the EXPORT of these symbols.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 17:15:51 +02:00
Jeff Garzik
e21a2b0cc5 Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2006-03-29 17:30:19 -05:00
Paul Mackerras
bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Alexey Dobriyan
7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Arjan van de Ven
99ac48f54a [PATCH] mark f_ops const in the inode
Mark the f_ops members of inodes as const, as well as fix the
ripple-through this causes by places that copy this f_ops and then "do
stuff" with it.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:05 -08:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Alan Stern
e041c68341 [PATCH] Notifier chain update: API changes
The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Jean Tourrilhes
0073602544 [PATCH] zd1201 wireless stat update
The "dev->get_wireless_stats" field is deprecated and slowly
be surely going away. Most drivers have been updated months
ago. Actually, there is an annoying message for driver still using it,
but it seems that user of zd1201 were not annoyed enough ;-)

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-27 11:39:15 -05:00
Linus Torvalds
1e8c573933 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits)
  BUG_ON() Conversion in drivers/video/
  BUG_ON() Conversion in drivers/parisc/
  BUG_ON() Conversion in drivers/block/
  BUG_ON() Conversion in sound/sparc/cs4231.c
  BUG_ON() Conversion in drivers/s390/block/dasd.c
  BUG_ON() Conversion in lib/swiotlb.c
  BUG_ON() Conversion in kernel/cpu.c
  BUG_ON() Conversion in ipc/msg.c
  BUG_ON() Conversion in block/elevator.c
  BUG_ON() Conversion in fs/coda/
  BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
  BUG_ON() Conversion in input/serio/hil_mlc.c
  BUG_ON() Conversion in md/dm-hw-handler.c
  BUG_ON() Conversion in md/bitmap.c
  The comment describing how MS_ASYNC works in msync.c is confusing
  rcu: undeclared variable used in documentation
  fix typos "wich" -> "which"
  typo patch for fs/ufs/super.c
  Fix simple typos
  tabify drivers/char/Makefile
  ...
2006-03-25 08:41:09 -08:00
Mauro Carvalho Chehab
9f6933be66 V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video
Because of historic reasons, there are two separate directories with
V4L stuff. Most drivers are located at driver/media/video. However, some
code for USB Webcams were inserted under drivers/usb/media.

This makes difficult for module authors to know were things should be.
Also, makes Kconfig menu confusing for normal users.

This patch moves all V4L content under drivers/usb/media to
drivers/media/video, and fixes Kconfig/Makefile entries.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-25 09:29:04 -03:00
Uwe Zeisberger
c30fe7f731 fix typos "wich" -> "which"
Signed-off-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-24 18:23:14 +01:00
Alexey Dobriyan
53b3531bbb [PATCH] s/;;/;/g
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:24 -08:00
Linus Torvalds
2bf2154c6b Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (81 commits)
  [PATCH] USB: omninet: fix up debugging comments
  [PATCH] USB serial: add navman driver
  [PATCH] USB: Fix irda-usb use after use
  [PATCH] USB: rtl8150 small fix
  [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids
  [PATCH] USB: cp2101: add new device IDs
  [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS
  [PATCH] USB: vicam.c: fix a NULL pointer dereference
  [PATCH] USB: ZC0301 driver bugfix
  [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard
  [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader
  [PATCH] USB: storage: unusual_devs.h entry 0420:0001
  [PATCH] USB: storage: another unusual_devs.h entry
  [PATCH] USB: storage: sandisk unusual_devices entry
  [PATCH] USB: fix initdata issue in isp116x-hcd
  [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)
  [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces
  [PATCH] USB: ub 03 drop stall clearing
  [PATCH] USB: ub 02 remove diag
  [PATCH] USB: ub 01 remove first_open
  ...
2006-03-21 09:25:47 -08:00
Greg Kroah-Hartman
71a8924bee [PATCH] USB: omninet: fix up debugging comments
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:03 -08:00
Greg Kroah-Hartman
e9a66c64bb [PATCH] USB serial: add navman driver
Thanks to Warren Lewis <wlewis@scn.org> for the information needed to
write the driver and for testing it out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:03 -08:00
Petko Manolov
09abfa8048 [PATCH] USB: rtl8150 small fix
This one is about announcing the device registration after the last check
has been made.

From: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:02 -08:00
A. Maitland Bottoms
bf58fbd5e8 [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids
The Icom ID-1 1.2 GHz band digital transceiver is a new radio
that has a USB interface. With this patch, the ftdi_sio driver
will report "Detected FT8U232AM" and provide a serial device
interface.

Signed-off-by: "A. Maitland Bottoms" <bottoms@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:02 -08:00
Craig Shelley
59224f5352 [PATCH] USB: cp2101: add new device IDs
This patch adds a new device ID to the cp2101 driver

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:02 -08:00
Horst Schirmeier
24f8b116c4 [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS
check_ctrlrecip() disallows any control transfers if the device is
deconfigured (in configuration 0, ie.  state ADDRESS).  This for example
makes it impossible to read the device descriptors without configuring the
device, although most standard device requests are allowed in this state by
the spec.  This patch allows control transfers for the ADDRESS state, too.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:02 -08:00
Adrian Bunk
f88f8295d8 [PATCH] USB: vicam.c: fix a NULL pointer dereference
This patch fixes a NULL pointer dereference spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:02 -08:00
Luca Risolia
6e0755a4b2 [PATCH] USB: ZC0301 driver bugfix
ZC0301 driver bugfix.

Use correct PID/VID USB entries.

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Wolfgang Rohdewald
2e56222ed5 [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard
Signed-off-by: Wolfgang Rohdewald <wolfgang@rohdewald.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Rodolfo Quesada
9d5847bc1a [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader
This patch (as661) adds an unusual_devs entry for the Mitsumi 7in1 Card
Reader.

From: Rodolfo Quesada <rquesada@roqz.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Pete Zaitcev
23b7885d50 [PATCH] USB: storage: unusual_devs.h entry 0420:0001
Ref
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=176584

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Pete Zaitcev
c713c973fb [PATCH] USB: storage: another unusual_devs.h entry
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Phil Dibowitz
1e7a5a84e4 [PATCH] USB: storage: sandisk unusual_devices entry
The following adds an unusual_devs entry for the SanDisk ImageMate CompactFlash
USB drive, for the US_FL_FIX_CAPACITY flag. Additionally, it removes trailing
whitespace from the previous entry. It's based on the patch sent by Roman Hodek
<roman@hodek.net>.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Greg Kroah-Hartman
b712548c5d [PATCH] USB: fix initdata issue in isp116x-hcd
As found by Sam's scripts.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Horst Schirmeier
f48219db93 [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)
When trying to deconfigure a device via usb_set_configuration(dev, 0),
2.6.16-rc kernels after 55c527187c oops
with "Unable to handle NULL pointer dereference at...". This is due to
an unchecked dereference of cp in the power budget part.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Alan Stern
6aa35675bb [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces
In a couple of places, usbcore assumes that a USB device configuration
will have a nonzero number of interfaces.  Having no interfaces may or
may not be allowed by the USB spec; in any event we shouldn't die if we
encounter such a thing.  This patch (as662) removes the assumptions.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:01 -08:00
Alan Stern
ae55717584 [PATCH] USB: UHCI: Increase port-reset completion delay for HP controllers
This patch (as657) increases the port-reset completion delay in uhci-hcd
for HP's embedded controllers.  Unlike other UHCI controllers, the HP
chips can take as long as 250 us to carry out the processing associated
with finishing a port reset.

This fixes Novell bug #148761.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:00 -08:00
Dick Streefland
491b04ce1c [PATCH] USB: support for USB-to-serial cable from Speed Dragon Multimedia
The USB data cable for my Samsung GSM phone contains the USB-to-serial
converter chip MS3303H from Speed Dragon Multimedia, Inc.  that appears to
be compatible with the PL2303 chip.  The following patch adds support for
this chip to the pl2303 driver.

Signed-off-by: Dick Streefland <dick@streefland.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:00 -08:00
Julian Bradfield
96050b11f6 [PATCH] USB: PL2303 and TIOCMIWAIT
A while ago, I posted about TIOCMIWAIT not working with the PL2303
USB-serial adapter.

After a brief exchange with Greg, I tracked this to a missing wake-up
in the USB interrupt procedures. I got our systems staff to install
the enclosed very simple patch to our 2.6.12 kernels, and it all works
fine as expected. I guess this should also apply to the latest version
and go into the mainstream.

Apologies for the long delay in posting the result.

The routine being patched is pl2303_update_line_status

Signed-off-by: Julian Bradfield <jcb+luu@inf.ed.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:00 -08:00
Lonnie Mendez
a5c44e29e5 [PATCH] USB: cypress_m8: add support for the Nokia ca42-version 2 cable
This patch adds support for the Nokia ca42 version 2 cable to the
cypress_m8 driver.  The device was tested by others with this patch and
found to be compatible with the cypress_m8 driver.  A special note
should be taken that this cable seems to vary in the type of chipset
used.  This patch supports the cable with product id 0x4101.

Signed-off-by: Lonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-20 14:50:00 -08:00