Commit Graph

1719 Commits

Author SHA1 Message Date
Russell King
ba84be2338 remove linux/hardirq.h from asm-generic/local.h
While looking at reducing the amount of architecture namespace pollution
in the generic kernel, I found that asm/irq.h is included in the vast
majority of compilations on ARM (around 650 files.)

Since asm/irq.h includes a sub-architecture include file on ARM, this
causes a negative impact on the ccache's ability to re-use the build
results from other sub-architectures, so we have a desire to reduce the
dependencies on asm/irq.h.

It turns out that a major cause of this is the needless include of
linux/hardirq.h into asm-generic/local.h.  The patch below removes this
include, resulting in some 250 to 300 files (around half) of the kernel
then omitting asm/irq.h.

My test builds still succeed, provided two ARM files are fixed
(arch/arm/kernel/traps.c and arch/arm/mm/fault.c) - so there may be
negative impacts for this on other architectures.

Note that x86 does not include asm/irq.h nor linux/hardirq.h in its
asm/local.h, so this patch can be viewed as bringing the generic version
into line with the x86 version.

[kosaki.motohiro@jp.fujitsu.com: add #include <linux/irqflags.h> to acpi/processor_idle.c]
[adobriyan@gmail.com: fix sparc64]
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:13 -08:00
Rusty Russell
2fdf66b491 cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t
Impact: Reduce memory usage, use new API.

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

(Changes to powernow-k* by <travis>.)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-03 19:15:40 +01:00
Ingo Molnar
79a66b96c3 Merge branches 'x86/pat2' and 'x86/fpu'; commit 'v2.6.28' into x86/core 2008-12-25 11:50:41 +01:00
Ingo Molnar
be9a1d3c2e Merge branch 'x86/tsc' into x86/core 2008-12-23 16:30:20 +01:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Bjorn Helgaas
e76f427611 ACPI: fix 2.6.28 acpi.debug_level regression
acpi_early_init() was changed to over-write the cmdline param,
making it really inconvenient to set debug flags at boot-time.

Also,
This sets the default level to "info", which is what all the ACPI
drivers use.  So to enable messages from drivers, you only have to
supply the "layer" (a.k.a. "component").  For non-"info" ACPI core
and ACPI interpreter messages, you have to supply both level and
layer masks, as before.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19 04:38:32 -05:00
Venki Pallipadi
40fb17152c x86: support always running TSC on Intel CPUs
Impact: reward non-stop TSCs with good TSC-based clocksources, etc.

Add support for CPUID_0x80000007_Bit8 on Intel CPUs as well. This bit means
that the TSC is invariant with C/P/T states and always runs at constant
frequency.

With Intel CPUs, we have 3 classes
* CPUs where TSC runs at constant rate and does not stop n C-states
* CPUs where TSC runs at constant rate, but will stop in deep C-states
* CPUs where TSC rate will vary based on P/T-states and TSC will stop in deep
  C-states.

To cover these 3, one feature bit (CONSTANT_TSC) is not enough. So, add a
second bit (NONSTOP_TSC). CONSTANT_TSC indicates that the TSC runs at
constant frequency irrespective of P/T-states, and NONSTOP_TSC indicates
that TSC does not stop in deep C-states.

CPUID_0x8000000_Bit8 indicates both these feature bit can be set.
We still have CONSTANT_TSC _set_ and NONSTOP_TSC _not_set_ on some older Intel
CPUs, based on model checks. We can use TSC on such CPUs for time, as long as
those CPUs do not support/enter deep C-states.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-16 21:02:50 +01:00
Frederik Deweerdt
38aefbc585 ACPI toshiba: only register rfkill if bt is enabled
Part of the rfkill initialization was done whenever BT was on or not.  The
following patch checks for BT presence before registering the rfkill to
the input layer.  Some minor cleanups (> 80 char lines) were also added in
the process.

On Tue, Oct 28, 2008 at 10:10:37PM +0300, Andrey Borzenkov wrote:
[...]
> [   66.633036] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
> [   66.633054] toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
> [   66.637764] input: Toshiba RFKill Switch as /devices/virtual/input/input3
[...]
> [  113.920753] ------------[ cut here ]------------
> [  113.920828] kernel BUG at /home/bor/src/linux-git/net/rfkill/rfkill.c:347!
> [  113.920845] invalid opcode: 0000 [#1]
> [  113.920877] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/host0/target0:0:0/0:0:0:0/block/sda/size
> [  113.920900] Dumping ftrace buffer:
> [  113.920919]    (ftrace buffer empty)
> [  113.920933] Modules linked in: af_packet irnet ppp_generic slhc ircomm_tty ircomm binfmt_misc loop dm_mirror dm_region_hash dm_log dm_round_robin dm_multipath dm_mod alim15x3 ide_core nvram toshiba cryptomgr aead crypto_blkcipher michael_mic crypto_algapi orinoco_cs orinoco hermes_dld hermes pcmcia firmware_class snd_ali5451 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device smsc_ircc2 snd_pcm_oss snd_pcm rtc_cmos irda snd_timer snd_mixer_oss rtc_core snd crc_ccitt yenta_socket rtc_lib rsrc_nonstatic i2c_ali1535 pcmcia_core pcspkr psmouse soundcore i2c_core evdev sr_mod snd_page_alloc alim1535_wdt cdrom fan sg video output toshiba_acpi rfkill thermal backlight ali_agp processor ac button input_polldev battery agpgart ohci_hcd usbcore reiserfs pata_ali libata sd_mod scsi_mod [last unloaded: scsi_wait_scan]
> [  113.921765]
> [  113.921785] Pid: 3272, comm: ipolldevd Not tainted (2.6.28-rc2-1avb #3) PORTEGE 4000
> [  113.921801] EIP: 0060:[<dfaa4683>] EFLAGS: 00010246 CPU: 0
> [  113.921854] EIP is at rfkill_force_state+0x53/0x90 [rfkill]
> [  113.921870] EAX: 00000000 EBX: 00000000 ECX: 00000003 EDX: 00000000
> [  113.921885] ESI: 00000000 EDI: ddd50300 EBP: d8d7af40 ESP: d8d7af24
> [  113.921900]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> [  113.921918] Process ipolldevd (pid: 3272, ti=d8d7a000 task=d8d93c90 task.ti=d8d7a000)
> [  113.921933] Stack:
> [  113.921945]  d8d7af38 00000246 dfb029d8 dfb029c0 dfb029d8 dfb029c0 ddd50300 d8d7af5c
> [  113.922014]  dfb018e2 01000246 01000000 ddd50300 ddd50314 ddabb8a0 d8d7af68 dfb381c1
> [  113.922098]  00000000 d8d7afa4 c012ec0a 00000000 00000002 00000000 c012eba8 ddabb8c0
> [  113.922240] Call Trace:
> [  113.922240]  [<dfb018e2>] ? bt_poll_rfkill+0x5c/0x82 [toshiba_acpi]
> [  113.922240]  [<dfb381c1>] ? input_polled_device_work+0x11/0x40 [input_polldev]
> [  113.922240]  [<c012ec0a>] ? run_workqueue+0xea/0x1f0
> [  113.922240]  [<c012eba8>] ? run_workqueue+0x88/0x1f0
> [  113.922240]  [<dfb381b0>] ? input_polled_device_work+0x0/0x40 [input_polldev]
> [  113.922240]  [<c012f047>] ? worker_thread+0x87/0xf0
> [  113.922240]  [<c0132b00>] ? autoremove_wake_function+0x0/0x50
> [  113.922240]  [<c012efc0>] ? worker_thread+0x0/0xf0
> [  113.922240]  [<c013280f>] ? kthread+0x3f/0x80
> [  113.922240]  [<c01327d0>] ? kthread+0x0/0x80
> [  113.922240]  [<c01040d7>] ? kernel_thread_helper+0x7/0x10
> [  113.922240] Code: 43 54 89 73 54 39 c6 74 11 89 d9 ba 01 00 00 00 b8 40 68 aa df e8 3e 35 69 e0 89 f8 e8 77 fd 85 e0 31 c0 83 c4 10 5b 5e 5f 5d c3 <0f> 0b eb fe 89 f6 8d bc 27 00 00 00 00 be f4 4d aa df bb 5f 01
> [  113.922240] EIP: [<dfaa4683>] rfkill_force_state+0x53/0x90 [rfkill] SS:ESP 0068:d8d7af24
> [  113.924700] ---[ end trace 0e404eb40cadd5f0 ]---

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Acked-by: Len Brown <len.brown@intel.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-15 16:27:07 -08:00
Linus Torvalds
f10a3a32ae Revert "ACPI: battery: Convert discharge energy rate to current properly"
This reverts commit 558073dd56, along with
the failed try to fix the regression it caused ("ACPI: Fix ACPI battery
regression introduced by commit 558073"), which just made things worse.

Commit aaad077638 (that failed "Fix ACPI
battery regression") got the voltage conversion confused, and fixed the
problem with Rafael's battery monitor apparently just by mistake.

So revert them both, getting us back to the 2.6.27 state in this, and
let's revisit it when people understand what's going on.

Noted-by: Paul Martin <pm@debian.org>
Requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 13:30:03 -08:00
Rafael J. Wysocki
aaad077638 ACPI: Fix ACPI battery regression introduced by commit 558073
Commit 558073dd56 ("ACPI: battery: Convert
discharge energy rate to current properly") caused the battery subsystem
to report wrong values of the remaining time on battery power and the
time until fully charged on Toshiba Portege R500 (and presumably on
other boxes too).

Fix the issue by correcting the conversion from mW to mA.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-04 21:43:16 -08:00
Arjan van de Ven
23d0a65cf2 toshiba_acpi: close race in toshiba_acpi driver
the toshiba ACPI driver will, in a failure case, free the rfkill state
before stopping the polling timer that would use this state. More interesting,
in the same failure case handling, it calls the exit function, which also
frees the rfkill state, but after stopping the polling.

If the race happens, a NULL pointer is passed to rfkill_force_state()
which then causes a nice dereference.

Fix the race by just not doing the too-early freeing of the rfkill state.

This appears to be the cause of a hot issue on kerneloops.org; while I
have no solid evidence of that this patch will fix the issue, the race
appears rather real.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-28 14:21:53 -05:00
Len Brown
a6e0887f21 ACPI: delete OSI(Linux) DMI dmesg spam
Linux will continue to ignore OSI(Linux),
except for a white-list containing a few systems.

So delete the black-list,
and stop soliciting user-feedback on the console.

Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-27 01:55:21 -05:00
Len Brown
3bdca1b863 Revert "ACPI: don't enable control method power button as wakeup device when Fixed Power button is used"
This reverts commit faee816b15.

http://bugzilla.kernel.org/show_bug.cgi?id=12091

Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26 17:55:15 -05:00
Rafael J. Wysocki
65df78473f ACPI suspend: Blacklist boxes that require us to set SCI_EN directly on resume
Some Apple boxes evidently require us to set SCI_EN on resume
directly, because if we don't do that, they hung somewhere in the
resume code path.  Moreover, on these boxes it is not sufficient to
use acpi_enable() to turn ACPI on during resume.  All of this is
against the ACPI specification which states that (1) the BIOS is
supposed to return from the S3 sleep state with ACPI enabled
(SCI_EN set) and (2) the SCI_EN bit is owned by the hardware and we
are not supposed to change it.

For this reason, blacklist the affected systems so that the SCI_EN
bit is set during resume on them.

[NOTE: Unconditional setting SCI_EN for all system on resume doesn't
 work, because it makes some other systems crash (that's to be
 expected).  Also, it is not entirely clear right now if all of the
 Apple boxes require this workaround.]

This patch fixes the recent regression tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12038

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Tino Keitel <tino.keitel@gmx.de>
Tested-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26 17:53:13 -05:00
Pavel Machek
40599072dc ACPI: scheduling in atomic via acpi_evaluate_integer ()
Now I know why I had strange "scheduling in atomic" problems:
acpi_evaluate_integer() does malloc(..., irqs_disabled() ? GFP_ATOMIC
: GFP_KERNEL)... which is (of course) broken.

There's no way to reliably tell if we need GFP_ATOMIC or not from
code, this one for example fails to detect spinlocks held.

Fortunately, allocation seems small enough to be done on stack.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26 17:39:06 -05:00
Alexey Starikovskiy
558073dd56 ACPI: battery: Convert discharge energy rate to current properly
ACPI battery interface reports its state either in mW or in mA, and
discharge rate in your case is reported in mW. power_supply interface
does not have such a parameter, so current_now parameter is used
for all cases. But in case of mW, reported discharge should
be converted into mA.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26 17:23:10 -05:00
Alexey Starikovskiy
7b4d469228 ACPI: EC: count interrupts only if called from interrupt handler.
fix 2.6.28 EC interrupt storm regression

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-26 17:16:45 -05:00
Linus Torvalds
77fb61a04a acpi: fix oops in acpi_system_wakeup_device_seq_show
Commit 0794469da3: ("ACPI: struct device -
replace bus_id with dev_name(), dev_set_name()") introduced a bug by
testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing
out the bus information.

So if ldev->bus was NULL, we'd oops.

Reported-and-tested-by: Bruno Prmont <bonbons@linux-vserver.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-16 10:09:34 -08:00
Len Brown
d1876ba4de Merge branch 'ec' into release 2008-11-11 21:17:26 -05:00
Len Brown
547f784747 Merge branch 'processor-256' into release 2008-11-11 21:17:03 -05:00
Len Brown
f398778aa3 Merge branch 'video' into release
Conflicts:
	Documentation/kernel-parameters.txt

Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 21:15:50 -05:00
Len Brown
9b5a56ddfd Merge branch 'sysfs' into release 2008-11-11 21:14:49 -05:00
Len Brown
f613984902 Merge branch 'power' into release 2008-11-11 21:14:15 -05:00
Len Brown
3e0fe36483 Merge branch 'misc' into release 2008-11-11 21:14:11 -05:00
Len Brown
e911d27af4 Merge branch 'bugzilla-11917' into release 2008-11-11 21:14:01 -05:00
Len Brown
50f19e37c3 Merge branch 'bugzilla-11539' into release 2008-11-11 21:13:55 -05:00
Bjorn Helgaas
32836259ff ACPI: pci_link: remove acpi_irq_balance_set() interface
This removes the acpi_irq_balance_set() interface from the PCI
interrupt link driver.

x86 used acpi_irq_balance_set() to tell the PCI interrupt link
driver to configure links to minimize IRQ sharing.  But the link
driver can easily figure out whether to turn on IRQ balancing
based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of
that external interface.

It's better for the driver to figure this out at init-time.  If
we set it externally via the x86 code, the interface reduces
modularity, and we depend on the fact that acpi_process_madt()
happens before we process the kernel command line.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 21:12:05 -05:00
Alexey Starikovskiy
8517934ef6 ACPI: EC: Don't do transaction from GPE handler in poll mode.
Referencies: http://bugzilla.kernel.org/show_bug.cgi?id=12004

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:35:58 -05:00
Alexey Starikovskiy
06cf7d3c7a ACPI: EC: lower interrupt storm treshold
http://bugzilla.kernel.org/show_bug.cgi?id=11892

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:35:50 -05:00
Alexey Starikovskiy
0b7084ac67 ACPICA: Use spinlock for acpi_{en|dis}able_gpe
Disabling gpe might interfere with gpe detection/handling,
thus producing "interrupt not handled" errors.
Ironically, disabling of GPE from interrupt context is already
under spinlock, so only userspace needs to start using it.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:35:42 -05:00
Alexey Starikovskiy
a2f93aeadf ACPI: EC: restart failed command
Restart current transaction if we recieved unexpected GPEs instead
of needed ones.

http://bugzilla.kernel.org/show_bug.cgi?id=11896

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:34:41 -05:00
Alexey Starikovskiy
dd15f8c42a ACPI: EC: wait for last write gpe
There is a possibility that EC might break if next command is
issued within 1 us after write or burst-disable command.

Suggestd-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:34:19 -05:00
Alan Jenkins
f8248434e6 ACPI: EC: make kernel messages more useful when GPE storm is detected
Make sure we can tell if the GPE storm workaround gets activated,
and avoid flooding the logs afterwards.

http://bugzilla.kernel.org/show_bug.cgi?id=11841
"plenty of line "ACPI: EC: non-query interrupt received,
 switching to interrupt mode" in dmesg"

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:34:06 -05:00
Alexey Starikovskiy
1cfe62c801 ACPI: EC: revert msleep patch
With the better solution for EC interrupt storm issue,
there is no need to use msleep over udelay.

References:
	http://bugzilla.kernel.org/show_bug.cgi?id=11810
	http://bugzilla.kernel.org/show_bug.cgi?id=10724

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-11 18:33:57 -05:00
Thomas Renninger
c3d6de698c ACPI video: if no ACPI backlight support, use vendor drivers
If an ACPI graphics device supports backlight brightness functions (cmp. with
latest ACPI spec Appendix B), let the ACPI video driver control backlight and
switch backlight control off in vendor specific ACPI drivers (asus_acpi,
thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi).

Currently it is possible to load above drivers and let both poke on the
brightness HW registers, the video and vendor specific ACPI drivers -> bad.

This patch provides the basic support to check for BIOS capabilities before
driver loading time. Driver specific modifications are in separate follow up
patches.

"acpi_backlight=vendor"
	Prever vendor driver over ACPI driver for backlight.
"acpi_backlight=video" (default)
	Prever ACPI driver over vendor driver for backlight.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 23:57:55 -05:00
Thomas Renninger
22c13f9d81 ACPI: video: Ignore devices that aren't present in hardware
This is a reimplemention of commit
0119509c4f
from Matthew Garrett <mjg59@srcf.ucam.org>

This patch got removed because of a regression: ThinkPads with a
Intel graphics card and an Integrated Graphics Device BIOS implementation
stopped working.
In fact, they only worked because the ACPI device of the discrete, the
wrong one, got used (via int10). So ACPI functions were poking on the wrong
hardware used which is a sever bug.
The next patch provides support for above ThinkPads to be able to
switch brightness via the legacy thinkpad_acpi driver and automatically
detect when to use it.

Original commit message from Matthew Garrett:
    Vendors often ship machines with a choice of integrated or discrete
    graphics, and use the same DSDT for both. As a result, the ACPI video
    module will locate devices that may not exist on this specific platform.
    Attempt to determine whether the device exists or not, and abort the
    device creation if it doesn't.

http://bugzilla.kernel.org/show_bug.cgi?id=9614

Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 23:49:23 -05:00
Lin Ming
a1a8d334f9 Delete an unwanted return statement at evgpe.c
Len's tree branch release-2.6.27, found an unwanted return statement at
evgpe.c.

(git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
release-2.6.27)

Signed-of-by Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 22:21:33 -05:00
Bjorn Helgaas
a0d84a92df ACPI: update debug parameter documentation
Reformat acpi.debug_layer and acpi.debug_level documentation so it's
more readable, add some clues about how to figure out the mask bits that
enable a specific ACPI_DEBUG_PRINT statement, and include some useful
examples.

Move the list of masks to Documentation/acpi/debug.txt (these are
copies of the authoritative values in acoutput.h and acpi_drivers.h).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:45:29 -05:00
Bjorn Helgaas
87b586088e ACPI: turn off all debug output by default
When CONFIG_ACPI_DEBUG=y, the default acpi_dbg_layer and acpi_dbg_level
values built into the ACPI CA have some debug output enabled.  We'd
rather be quiet unless the user actually specified the acpi.debug_level
argument.

This enables distros to ship with CONFIG_ACPI_DEBUG=y without
inundating users with debug output.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:45:16 -05:00
Bjorn Helgaas
bdd7279919 ACPI: add driver component definitions to sysfs debug_layers
/sys/module/acpi/parameters/debug_layers used to contain only the
debug layers defined by the ACPI CA.  This patch adds the additional
layer definitions for ACPI drivers.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:45:04 -05:00
Bjorn Helgaas
89595b8f28 ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h
Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 21:44:37 -05:00
Alexey Starikovskiy
d21cf3c16b ACPI EC: Fix regression due to use of uninitialized variable
breakage introduced by following patch
commit 27663c5855
Author: Matthew Wilcox <willy@linux.intel.com>
Date:   Fri Oct 10 02:22:59 2008 -0400

acpi_evaluate_integer() does not clear passed variable if
there is an error at evaluation.
So if we ignore error, we must supply initialized variable.

http://bugzilla.kernel.org/show_bug.cgi?id=11917

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-07 14:45:00 -05:00
Peter Gruber
4feba70a2c ACPI: avoid empty file name in sysfs
Since commit bc45b1d39a acpi tables are
allowed to have an empty signature and /sys/firmware/acpi/tables uses the
signature as filename.  Applications using naive recursion through /sys
loop forever.  A possible solution would be: (replacing the zero length
filename with the string "NULL")

http://bugzilla.kernel.org/show_bug.cgi?id=11539

Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 22:09:52 -05:00
Yinghai Lu
14a63ba821 ACPI: use macro to replace hard number
Impact: cleanup

Use MACRO for rev 3 fadt id instead of 3 directly.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 21:51:02 -05:00
Kay Sievers
0794469da3 ACPI: struct device - replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 21:37:19 -05:00
Len Brown
d17cb18a07 Revert "ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanism"
This reverts commit 8fd145917f.

http://bugzilla.kernel.org/show_bug.cgi?id=11942

Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 20:51:59 -05:00
Myron Stowe
5b53ed6915 ACPI: 80 column adherence and spelling fix (no functional change)
Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 20:15:00 -05:00
Myron Stowe
b26e9286fb ACPI: Behave uniquely based on processor declaration definition type
Associating a Local SAPIC with a processor object is dependent upon the
processor object's definition type.  CPUs declared as "Processor" should
use the Local SAPIC's 'processor_id', and CPUs declared as "Device"
should use the 'uid'.  Note that for "Processor" declarations, even if a
'_UID' child object exists, it has no bearing with respect to mapping
Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced
Configuration and Power Interface Specification", Revision 3.0b).

This patch changes the lsapic mapping logic to rely on the distinction of
how the processor object was declared - the mapping can't just try both
types of matches regardless of declaration type and rely on one failing
as is currently being done.

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 20:14:41 -05:00
Myron Stowe
ad93a765c1 ACPI: Disambiguate processor declaration type
Declaring processors in ACPI namespace can be done using either a
"Processor" definition or a "Device" definition (see section 8.4 -
Declaring Processors; "Advanced Configuration and Power Interface
Specification", Revision 3.0b).  Currently the two processor
declaration types are conflated.

This patch disambiguates the processor declaration's definition type
enabling subsequent code to behave uniquely based explicitly on the
declaration's type.

Signed-off-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 20:11:15 -05:00
Bjorn Helgaas
8950d89aca ACPI: remove CONFIG_ACPI_EC
Remove CONFIG_ACPI_EC.  It was always set the same as CONFIG_ACPI,
and it had no menu label, so there was no way to set it to anything
other than "y".

Per section 6.5.4 of the ACPI 3.0b specification,

    OSPM must make Embedded Controller operation regions, accessed
    via the Embedded Controllers described in ECDT, available before
    executing any control method.

The ECDT table is optional, but if it is present, the above text
means that the EC it describes is a required part of the ACPI
subsystem, so CONFIG_ACPI_EC=n wouldn't make sense.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-11-06 15:52:28 -05:00