Commit Graph

172 Commits

Author SHA1 Message Date
Sascha Hauer
b5f3294f0b spi: add SPI driver for most known i.MX SoCs
This driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type
EEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:43 -07:00
Valentin Longchamp
4bd1527a64 mx31: define various GPIOs used on mx31moboard
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:09 +02:00
Sascha Hauer
7bc07ebc7d mx3x: Fixup USB base addresses
The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:41:01 +02:00
Valentin Longchamp
89829d5fe3 mx31: added one more pin definition
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:48 +02:00
Dmitriy Taychenachev
94da274b49 MXC: add iomux pins configuration support for MXC91231
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:47 +02:00
Dmitriy Taychenachev
fd6ac7bb9d MXC: add basic MXC91231 support
Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:46 +02:00
Lothar Waßmann
8e5be212cb i.MX25 iomux definitions (corrected version)
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:45 +02:00
Sascha Hauer
635baf6b40 Freescale i.MX25 PDK (3ds) board support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:43 +02:00
Sascha Hauer
8c25c36f33 Add i.MX25 support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:42 +02:00
Sascha Hauer
a058cbc179 mxc pwm: add mx25 support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:41 +02:00
Sascha Hauer
6134b2cbb0 iomux-v3: Allow for a runtime base address
also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:41 +02:00
Sascha Hauer
fc2a9f0bc7 MXC: i.MX25 timer support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:40 +02:00
Sascha Hauer
12b8eb8652 MXC: use variable for irq controller base in entry-macro.S
This allows us to determine the irq controller base address
on runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-14 12:40:39 +02:00
Eric Benard
a961bf380b Add support for Eukrea's MBIMX27
MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
Eric Benard
af5b1df713 Add support for Eukrea's CPUIMX27
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
Daniel Mack
88e29a8d21 MX3: add additional USB pins to iomux
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:12 +02:00
Sascha Hauer
5e63ff9a97 [ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:11 +02:00
Sascha Hauer
7dae1134cd [ARM] MXC: Switch MX1 to clkdev support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:10 +02:00
Sascha Hauer
6d73665f05 MXC PLL decoding: calculate mfn value with less magic
Also, use cpu_is_* macros rather than CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:10 +02:00
Sascha Hauer
5ef881bbec MXC: pwm driver fixes
- fix off-by-one error in divider calculation
- disable pwm in pwm_disable

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:10 +02:00
Sascha Hauer
494f22dddc MXC gpio interrupt support: move register definitions to .c file
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:10 +02:00
Sascha Hauer
8afaada2dc mxc gpio: CONFIG_ARCH_* -> cpu_is_*()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:11:09 +02:00
Sascha Hauer
343684ffb7 imxfb: Add support for multiple displays
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:56 +02:00
Sascha Hauer
f497d0153a imxfb: calculate bpix value from bits_per_pixel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:56 +02:00
Sascha Hauer
997d74b18a MXC iomux-v3: Fix defines for PAD_CTL registers
The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer
c5aa0ad0c5 mxc: turn to soc specific init_irq functions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer
12308dfe37 mxc: remove do not include directly
Everyone should be free to include the files he actually needs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:54 +02:00
Sascha Hauer
ccc1a6f8ee MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:52 +02:00
Sascha Hauer
d30c74a02f MXC uncompress macros: determine uart base by machine type
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:52 +02:00
Sascha Hauer
abae613056 mxc: remove ARCH_NR_GPIOS
Use the default value of 256 which is enough for all i.MX SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:52 +02:00
Sascha Hauer
be124c9427 system.c: runtime base address
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Sascha Hauer
8db5d1a64d MXC: pass base/irq to mxc_timer_init
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-08-07 12:10:51 +02:00
Guennadi Liakhovetski
32c1ad9ab2 pcm037: add MT9T031 camera support
Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037
board. Also add two I2C iomux pin definitions, needed for pcm037. Also
remove now unneeded #ifdef CONFIG_I2C_IMX.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 14:25:26 +02:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Fabian Godehardt
b6e4913834 imx: serial: add IrDA support to serial driver
Using the iMX serial driver with an IrDA device
needs extra peripheral settings and specific
timing depending on the transmitter circuitry used.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Oskar Schirmer <os@emlix.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:51:08 -07:00
Daniel Schaeffer
8c032ec337 mxc: Add i.MX27LITE board support
Sascha Hauer wrote:
> On Tue, Jun 02, 2009 at 04:18:42PM -0400, Daniel Schaeffer wrote:
>> Add basic support for the Logic i.MX27LITE board.
>>
>> Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com>
>
> Besides the comment made by Fabio this looks ok to me.
>
> Sascha
>
>

Fixed issues pointed out by Fabio and Magnus, and rebased to mxc-master head.

Signed-off-by: Daniel Schaeffer <daniel.schaeffer@timesys.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 09:34:23 +02:00
Fabio Estevam
aefa1c6e7b MX35: Add basic support for MX35PDK board
Add basic support for MX35PDK board (www.freescale.com/imx35pdk).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 11:44:50 +02:00
Daniel Mack
1bc34f7964 ARM: MX3: add skeleton for lilly-1131 development board
Support code for lilly-1131 is implemented in a module/baseboard
fashion. All code specific to peripherals found on the development board
will go to this file.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:40 +02:00
Daniel Mack
65b1aa13f2 ARM: MX3: basic support for lilly-1131 board
This patch adds basic support for INCO startec's LILLY-1131 iMX31 based
modules. The module needs a baseboard support to work which will be
added in the next patch.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-26 12:30:32 +02:00
Alberto Panizzo
5e9145edcc Atmark Armadillo 500 board support.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 11:24:57 +02:00
Magnus Lilja
135cad366b i.MX31: Add support for the CPLD on PDK Debug board.
The i.MX31 PDK consists of several boards, one of them is a debug
board containing a CPLD which controls some debug leds, switch
buttons, an interrupt chip and an Ethernet controller.
This patch adds support for detecting if the PDK board is present
(during boot) and adds the interrupt chip to the kernel.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-18 08:36:27 +02:00
Valentin Longchamp
c2e5307b90 mx31: changed CONSISTENT_DMA_SIZE to 8M for mx31 video
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:21:26 +02:00
Valentin Longchamp
ef754d6358 mx31: remove gpio_request calls from iomux code
Since iomux code is not directly related to gpio on mx31, the calls
to gpio_request are removed from iomux.c file.

These calls have to be done in platform initialization files. The
name of the singe pin call for iomux is also changed to
mxc_iomux_alloc_pin.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:20:40 +02:00
Sascha Hauer
81ec1f929f mxc: fix wrong register access in timer code
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:20:28 +02:00
Magnus Lilja
c133261631 i.MX31: Correct comments on CONFIG_DEBUG_LL.
Several comments in board config files stated "mandatory for
CONFIG_LL_DEBUG" but the correct name is CONFIG_DEBUG_LL.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:25 +02:00
Magnus Lilja
3b7b8db122 i.MX31: Removed unused items from board-mx31lite.h.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:18:16 +02:00
Valentin Longchamp
f801079b2b mx31: define various pins used on mx31moboard (v2)
As suggested by Sascha, I regroup them in a single patch so that the
other patches become more orthogonal.

changes since v1: changed I2C1 pin names

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:25 +02:00
Alan Carvalho de Assis
45001e92d0 i.MX31: Add hw-random for RNGA
This hw-random driver add support to RNGA hardware found
on some i.MX processors.

Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:17:16 +02:00
Fabio Estevam
ec9be0debd MX27: Add basic support to MX27PDK
This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ).

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:55 +02:00
Holger Schurig
c010dba89b imx: re-work of PWM, add i.MX21 support
* Kconfig enables now HAVE_PWM (this enables in turn the selection of
  CONFIG_BACKLIGHT_PWM)
* changes CONFIG_ARCH_MXyy to CONFIG_MACH_MXyy
* fix some register names to match those of the reference manual
* write a stub code so that the PWM can be used to program the
  LCD backlight
* convert from #ifdef CONFIG_ARCH_MXxx to cpu_is_mxXX()
* remove unneeded defines and fix 80-column "violations" of checkpatch.pl

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07 16:16:38 +02:00