Commit Graph

244 Commits

Author SHA1 Message Date
Bill Nottingham
88f5774b07 [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout
iterations is unsigned, so it is impossible to get out of the loop
and return -ETIMEDOUT.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Acked-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-30 10:15:32 -05:00
Linus Torvalds
0c23664ee8 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Optimize fault kprobe handling just like powerpc.
  [SPARC]: Wire up utimensat syscall.
  [SPARC64]: Fix request_irq() ignored result warnings in PCI controller code.
  [SPARC64]: Kill asm-sparc64/pbm.h
  [ATYFB]: Fix sparc includes.
  [QLA2XXX]: Fix build on sparc.
  [SPARC64]: Removal of trivial pci_controller_info uses.
  [SPARC64]: Move index info pci_pbm_info.
  [SPARC64]: Move {setup,teardown}_msi_irq into pci_pbm_info.
  [SPARC64]: Move pci_ops into pci_pbm_info.
  [SPARC64] SBUS: Error interrupt registry cleanups.
  [SPARC64] PCI: Use root list of pbm's instead of pci_controller_info's
  [SPARC64] PCI: Kill PROM_PCIRNG_MAX and PROM_PCIIMAP_MAX.
  [SPARC64] PCI: Use common routine to fetch PBM properties.
2007-05-08 20:32:43 -07:00
David S. Miller
15576bc8ad [QLA2XXX]: Fix build on sparc.
We now use pci_device_to_OF_node() to get properties
and of_get_property() returns const pointers.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-08 16:41:49 -07:00
Andrew Vasquez
d24f8e8fef [SCSI] qla2xxx: Update version number to 8.01.07-k7.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:21:59 -05:00
Andrew Vasquez
cbedb60186 [SCSI] qla2xxx: Add MSI support.
Supported ISP types include ISP2422 and revision-2 type
ISP2432 chips.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:21:45 -05:00
Andrew Vasquez
a157b1014f [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:21:29 -05:00
Andrew Vasquez
75edf81d33 [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:21:07 -05:00
Andrew Vasquez
a7b6184225 [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
Hardcoding the qlport_down_retry module-parameter
effectively disallowed any user-defined NVRAM setting to go
into effect.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:20:52 -05:00
Andrew Vasquez
765140bf22 [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
Remove a stale check against ha->device_flags
(DFLG_NO_CABLE) as topology scanning is performed within the
DPC-thread context.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-08 11:20:39 -05:00
David Miller
4e08df3f91 [SCSI] qla2xxx: fix regression on sparc64
Some sparc64 boxes don't have a valid NVRAM (from which the driver
takes its WWPN) try to extract this from open firmware instead and if
that fails, fall back to a default, which would be invalid if more
than one machine on the same SAN does this, since two machines with
the same WWPN would be illegal, so warn when taking this potentially
invalid default.

Tested on SunBlade-1000:

Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-30 09:58:52 -05:00
Bernhard Walle
665db93b8a [SCSI] qla2xxx: Remove duplicate pci_disable_device() call
On the path qla2x00_probe_one() -> probe_failed -> qla2x00_free_device(),
pci_disable_device() is executed twice, once in qla2x00_free_device()
and once in qla2x00_probe_one().

This patch removes the unnecessary call.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 10:27:29 -05:00
Richard Lary
1196ae025b [SCSI] qla2xxx: fix for byteswap in fc_host fabric_name
This patch fixes byte swap issue in qla2xxx driver
to fix corrupted fabric_name passed to
/sys/class/fc_host/host*/fabric_name.

Signed-off-by: Richard Lary <rlary@us.ibm.com>
Acked-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01 10:03:00 -05:00
Andrew Vasquez
457620b47a [SCSI] qla2xxx: Update version number to 8.01.07-k6.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:51:36 -05:00
Andrew Vasquez
27d9403528 [SCSI] qla2xxx: Allow the extended-error-logging flag to be dynamic.
The module parameter, ql2xextended_error_logging, can now be
set dynamically by writing to the following sysfs entry:

	/sys/module/qla2xxx/parameters/ql2xextended_error_logging

This alleviates the need for the driver to be unloaded and
reloaded in order to enable logging.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:51:20 -05:00
Andrew Vasquez
fecf97882a [SCSI] qla2xxx: Drop acquisition of hardware_lock during flash manipulations.
There's no need given, I/O has been quiesced, RISC
interrupts have been disabled, and finally the RISC has been
paused.  Flash manipulation on ISP21xx, ISP22xx, and ISP23xx
parts requires the RISC to go through a full reset to
recover.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:50:50 -05:00
Andrew Vasquez
40a2e34a94 [SCSI] qla2xxx: Add cond_resched() calls during HBA flash manipulation.
We're observing soft lockups during HBA FLASH retrieval and
update.  Add cond_resched() each time around the tight-loops
during flash read()s/write()s.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:50:30 -05:00
Andrew Vasquez
ed67708639 [SCSI] qla2xxx: Add scan_[start|finish]() callbacks for ISP24xx HBAs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:50:05 -05:00
Malahal Naineni
b889d531b6 [SCSI] qla2xxx: fix RSCN handling on big-endian systems
qla2xxx driver fails to handle RSCN events affecting area or domain due
to an endian issue on big endian systems.  This fixes the port_id_t
structure on big endian systems.

Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Acked-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20 10:49:40 -05:00
Andrew Vasquez
7b3b921163 [SCSI] qla2xxx: Update version number to 8.01.07-k5.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:26:43 -06:00
James Bottomley
30716e07ef Merge branch 'linus' 2007-01-31 11:24:00 -06:00
Seokmann Ju
03c79cc56e [SCSI] qla2xxx: Remove unnecessary spinlock primitive - mbx_reg_lock.
Since, mailbox commands are executed in a synchronous
manner, there is no need to have a separate spinlock
primitive to protect data/register access shared by callers.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:15:09 -06:00
Andrew Vasquez
7c98a046b7 [SCSI] qla2xxx: Fixup printk() with proper new-line character.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:14:52 -06:00
Andrew Vasquez
26b8d34808 [SCSI] qla2xxx: Allow NVRAM updates to immediately go into effect.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:14:32 -06:00
Andrew Vasquez
ffec28a3e9 [SCSI] qla2xxx: Enable queue-full throttling when UNDERRUN detected.
As ISP24xx firmware can return a CS_DATA_UNDERRUN completion
status when the storage has returned a
SAM_STAT_TASK_SET_FULL scsi-status.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:13:45 -06:00
Andrew Vasquez
7aef45ac92 [SCSI] qla2xxx: Fail initialization when inconsistent NVRAM detected.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:13:24 -06:00
Andrew Vasquez
178779a6ca [SCSI] qla2xxx: Check loop-state before reading host statistics.
Non-ISP24xx cards must have a loop-id in order to query host
statistics.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:13:07 -06:00
Andrew Vasquez
9bb9fcf2f2 [SCSI] qla2xxx: Refactor set-HBA-model/description code.
Limit assignments via qla2x00_model_name[] array to HBA
subsystem vendor IDs equal to QLogic.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:12:30 -06:00
Andrew Vasquez
2603221a28 [SCSI] qla2xxx: Set correct cabling state during initialization.
Previous work to add asynchronous-scsi-scanning support
(d19044c32b) caused peculiar
semantic changes when no cabling was attached to the HBA
whereby unneeded and intrusive 'error-handling' would take
place due to the initial link state being unset.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:08:02 -06:00
Lalit Chandivade
b1372bc90f [SCSI] qla2xxx: Perform implicit LOGO during fabric logout request.
Similarly to previous LOGO requests on non-24xx hardware,
perform an implicit-LOGO as to avoid the potential 2 *
R_A_TOV delay which can result during an explicit-LOGO
request.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:07:32 -06:00
Andrew Vasquez
30c4766213 [SCSI] qla2xxx: Export OptionROM boot-codes version information.
This includes BIOS, EFI, FCODE and firmware versions.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:06:38 -06:00
Andrew Vasquez
d88021a671 [SCSI] qla2xxx: Handle IRQ-0 assignments by the system.
No restriction should be placed on the IRQ number assigned
to a given ISP.  Original code incorrectly assumed a
non-zero IRQ number assignment by the system.  In these
circumstances the proper freeing of the IRQ (via free_irq())
would not take place.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:06:12 -06:00
Andrew Vasquez
a8488abefa [SCSI] qla2xxx: Add MSI-X support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:05:20 -06:00
Andrew Vasquez
3c60612368 [SCSI] qla2xxx: Correct sector-erase issues while writing flash.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-31 11:04:44 -06:00
Seokmann Ju
befede3dab [SCSI] qla2xxx: correct locking while call starget_for_each_device()
Removed spin_unlock_irq()/spin_lock_irq() pairs surrounding
starget_for_each_device() calls.
As Matthew W. pointed out, starget_for_each_device() can be called under
a spinlock being held.
The change has been tested and verified on qla2xxx.ko module.
Thanks Matthew W. and Hisashi H. for help.

Signed-off-by: Andrew Vasquez <Andrew.vasquez@qlogic.com>
Signed-off-by: Seokmann Ju <Seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 13:59:10 -06:00
Andrew Vasquez
03c1c39680 [SCSI] qla2xxx: Update version number to 8.01.07-k4.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:58:13 -06:00
Andrew Vasquez
96ca5cad09 [SCSI] qla2xxx: Use generic isp_ops.fw_dump() function.
Rather than a direct call, as was done in the case of a
RISC-paused state within the ISP24xx interrupt handler.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:58:09 -06:00
Andrew Vasquez
07f31805e1 [SCSI] qla2xxx: Perform a fw-dump when an ISP23xx RISC-paused state is detected.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:58:05 -06:00
Andrew Vasquez
0c8c39af16 [SCSI] qla2xxx: Correct reset handling logic.
- honor ISP24XX NVRAM settings for lip-reset, full-login-lip, and
  device-reset.
- correct LIP_FULL_LOGIN mailbox command issuance.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:58:01 -06:00
Andrew Vasquez
8bc69e7dc3 [SCSI] qla2xxx: Correct IOCB queueing mechanism for ISP54XX HBAs.
Original code would incorrectly use non-24xx code-paths.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:58 -06:00
Andrew Vasquez
4346b14942 [SCSI] qla2xxx: Detect GPSC capabilities within a fabric.
Disable subsequent GPSC queries if Fabric Management services do
not support the operation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:54 -06:00
Andrew Vasquez
71ea9949a3 [SCSI] qla2xxx: Use proper prep_ms_iocb() function during GFPN_ID.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:50 -06:00
Andrew Vasquez
cdfc82ade6 [SCSI] qla2xxx: Correct endianess issue while interrogating MS status.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:46 -06:00
Andrew Vasquez
87b2380fcc [SCSI] qla2xxx: Don't log trace-control async-events.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:42 -06:00
Adrian Bunk
23be331d9e [SCSI] qla2xxx: make qla2x00_reg_remote_port() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:27 -06:00
Christoph Lameter
e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Randy Dunlap
46ddab7b1c [SCSI] qla2xxx: use NULL instead of 0
Use NULL instead of 0 for pointers (sparse warning):
drivers/scsi/qla2xxx/qla_attr.c:393:4: warning: Using plain integer as NULL pointer

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03 09:24:01 -06:00
Andrew Vasquez
1e99e33ad9 [SCSI] qla2xxx: add asynchronous scsi scanning support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 16:43:28 -06:00
Andrew Vasquez
d19044c32b [SCSI] qla2xxx: defer topology discovery to DPC thread during initialization.
Modify intialization semantics:

- perform basic hardware configuration only (as usual)
  - allocate resources
  - load and execute firmware

- defer link (transport) negotiations to the DPC thread
  - again the code in qla2x00_initialize_adapter() to stall probe()
    completion was needed for legacy-style scanning.
  - DPC thread stalls until probe() complete.

- before probe() completes, set DPC flags to perform loop-resync logic
  (similar to what's done during cable-insertion/removal).

Benefits: user does not have to wait 20+ seconds in case the FC cable
is unplugged during driver load, code consolidation (removal of
redundant link negotiation logic during initialize_adaoter()), and
finilly, the driver no longer needs to defer the fc_remote_port_add()
calls to hold off lun-scanning prior to returning from the probe()
function.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22 16:43:16 -06:00
James Bottomley
0bd2af4683 Merge ../scsi-rc-fixes-2.6 2006-11-22 12:06:44 -06:00
Adrian Bunk
e5f82ab834 [SCSI] qla2xxx: make some functions static
This patch makes some needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-15 16:42:35 -06:00