Commit Graph

602090 Commits

Author SHA1 Message Date
Christoph Hellwig
70246286e9 block: get rid of bio_rw and READA
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces.  For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense.  Any check for READA is replaced with an
explicit check for REQ_RAHEAD.  Also remove the READA alias for
REQ_RAHEAD.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:37:01 -06:00
Christoph Hellwig
3f40bf2c89 block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
WRITE SAME is a data integrity operation and we can't simply ignore
errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:35:22 -06:00
Christoph Hellwig
e950fdf71c block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
Currently blkdev_issue_zeroout cascades down from discards (if the driver
guarantees that discards zero data), to WRITE SAME and then to a loop
writing zeroes.  Unfortunately we ignore run-time EOPNOTSUPP errors in the
block layer blkdev_issue_discard helper to work around DM volumes that
may have mixed discard support underneath.

This patch intoroduces a new BLKDEV_DISCARD_ZERO flag to
blkdev_issue_discard that indicates we are called for zeroing operation.
This allows both to ignore the EOPNOTSUPP hack and actually consolidating
the discard_zeroes_data check into the function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-20 17:35:20 -06:00
NeilBrown
b09dcf585d NVMe: don't allocate unused nvme_major
When alloc_disk(0) is used, the ->major number is ignored.  All device
numbers are allocated with a major of BLOCK_EXT_MAJOR.

So remove all references to nvme_major.

[akpm@linux-foundation.org: one unregister_blkdev() was missed]
Link: http://lkml.kernel.org/r/20160602064318.4403.93301.stgit@noble
Signed-off-by: NeilBrown <neilb@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-14 08:52:56 -07:00
Masayoshi Mizuma
2fa843512b nvme: avoid crashes when node 0 is memoryless node.
When CONFIG_NUMA is enabled and node 0 is memoryless, the system
crashes because nvme_probe() sets the device->numa_node to 0 by
set_dev_node(&pdev->dev, 0), so it tries to allocate memory from node 0.
To avoid the crash, we should change the 0 to first_memory_node.

Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-13 09:17:55 -07:00
Keith Busch
f80ec966c1 nvme: Limit command retries
Many controller implementations will return errors to commands that will
not succeed, but without the DNR bit set. The driver previously retried
these commands an unlimited number of times until the command timeout
has exceeded, which takes an unnecessarilly long period of time.

This patch limits the number of retries a command can have, defaulting
to 5, but is user tunable at load or runtime.

The struct request's 'retries' field is used to track the number of
retries attempted. This is in contrast with scsi's use of this field,
which indicates how many retries are allowed.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 16:20:31 -07:00
Minfei Huang
7a6497378a loop: Make user notify for adding loop device failed
There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to make
user notify in this case.

Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 16:17:18 -07:00
Arnd Bergmann
6eae8c4520 nvme-loop: fix nvme-loop Kconfig dependencies
I ran into the same problem on NVME_TARGET_RDMA now,
which otherwise needs dependencies on both CONFIG_BLOCK and
CONFIGFS_FS:

    warning: (NVME_TARGET_LOOP && NVME_TARGET_RDMA) selects NVME_TARGET which has unmet direct dependencies (BLOCK && CONFIGFS_FS)
    0xA002B368 Mon Jul 11 18:00:45 CEST 2016 failed
    In file included from ../drivers/nvme/target/core.c:16:0:
    drivers/nvme/target/nvmet.h:222:14: error: field 'inline_bio' has incomplete type
      struct bio  inline_bio;
                  ^~~~~~~~~~
    drivers/nvme/target/core.c: In function 'nvmet_async_event_work':
    drivers/nvme/target/core.c:98:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
       kfree(aen);
       ^~~~~
    ../drivers/nvme/target/core.c: In function 'nvmet_ns_enable':
    ../drivers/nvme/target/core.c:269:13: error: implicit declaration of function 'blkdev_get_by_path' [-Werror=implicit-function-declaration]
      ns->bdev = blkdev_get_by_path(ns->device_path, FMODE_READ | FMODE_WRITE,

Folding in my patch below should address that too.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:36:40 -07:00
Wei Yongjun
69555af2ce nvmet: fix return value check in nvmet_subsys_alloc()
In case of error, the function kstrndup() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:33:43 -07:00
Ming Lin
e76debd996 nvme-fabrics: add-remove ctrl repeat fix
Repeatedly adding then removing the same NVMe-over-Fabrics controller
over and over again (shown below) can cause a kernel crash (also shown
below).  This patch fixes that.

[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=lightside
-nqn,hostnqn=good-wins-nqn > /dev/nvme-fabrics
[nvmf]# ./remove_nvme_connections.sh 2
echo 1 > /sys/class/nvme/nvme0/delete_controller
echo 1 > /sys/class/nvme/nvme1/delete_controller
[nvmf]# ./setup_nvme_connections.sh
traddr=192.168.1.100,transport=rdma,trsvcid=4420,nqn=darkside
-nqn,hostnqn=evil-wins-nqn,nr_io_queues=16 > /dev/nvme-fabrics
Killed

[nvmf]# dmesg
[  313.416908] nvme nvme0: creating 16 I/O queues.
[  313.523908] nvme nvme0: new ctrl: NQN "darkside-nqn", addr
192.168.1.100:4420
[  313.524857] BUG: unable to handle kernel NULL pointer dereference at
0000000000000010
[  313.525262] IP: [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.525490] PGD 0
[  313.525726] Oops: 0000 [#1] SMP
[  313.525900] Modules linked in: nvme_rdma nvme_fabrics nvme_core
ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx4_en
mlx4_ib ib_core mlx4_core
[  313.527085] CPU: 15 PID: 5856 Comm: setup_nvme_conn Not tainted
4.7.0-rc2+ #2
[  313.527259] Hardware name: Supermicro X9DRT-F/IBQF/IBFF/X9DRT
-F/IBQF/IBFF, BIOS 1.0a 10/09/2012
[  313.527551] task: ffff88027646cd40 ti: ffff88025b980000 task.ti:
ffff88025b980000
[  313.527879] RIP: 0010:[<ffffffff8136c60e>]  [<ffffffff8136c60e>]
strcmp+0xe/0x30
[  313.528232] RSP: 0018:ffff88025b983db0  EFLAGS: 00010206
[  313.528403] RAX: 0000000000000000 RBX: ffff880471879880 RCX:
fffffffffffffff1
[  313.528594] RDX: 0000000000000000 RSI: ffff880474afa860 RDI:
0000000000000011
[  313.528778] RBP: ffff88025b983db0 R08: ffff880474afa860 R09:
ffff880471879058
[  313.528956] R10: 000000000000002c R11: ffff88047f415000 R12:
ffff880471879800
[  313.529129] R13: ffff880471879000 R14: ffff880474afa860 R15:
fffffffffffffff8
[  313.529303] FS:  00007f778f510700(0000) GS:ffff88047fbc0000(0000)
knlGS:0000000000000000
[  313.529629] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  313.529817] CR2: 0000000000000010 CR3: 0000000274174000 CR4:
00000000000406e0
[  313.529989] Stack:
[  313.530154]  ffff88025b983e48 ffffffffa0171c74 0000000000000001
0000000000000059
[  313.530621]  ffff880476f32400 ffff88047e8add80 0000010074b33aa0
ffff880471879059
[  313.531162]  ffff88047187904b ffff880471879058 0000000000000000
ffff88047736e000
[  313.531629] Call Trace:
[  313.531797]  [<ffffffffa0171c74>] nvmf_dev_write+0x674/0x840
[nvme_fabrics]
[  313.531974]  [<ffffffff81180b53>] __vfs_write+0x23/0x120
[  313.532146]  [<ffffffff8119daff>] ? __fd_install+0x1f/0xc0
[  313.532316]  [<ffffffff8119d97a>] ? __alloc_fd+0x3a/0x170
[  313.532487]  [<ffffffff811811f3>] vfs_write+0xb3/0x1b0
[  313.532658]  [<ffffffff8117e321>] ? filp_close+0x51/0x70
[  313.532845]  [<ffffffff811824e1>] SyS_write+0x41/0xa0
[  313.533016]  [<ffffffff8183055b>]
entry_SYSCALL_64_fastpath+0x13/0x8f
[  313.533188] Code: 80 3a 00 75 f7 48 83 c6 01 0f b6 4e ff 48 83 c2 01
84 c9 88 4a ff 75 ed 5d c3 0f 1f 00 55 48 89 e5 eb 04 84 c0 74 18 48 83
c7 01 <0f> b6 47 ff 48 83 c6 01 3a 46 ff 74 eb 19 c0 83 c8 01 5d c3 31
[  313.536563] RIP  [<ffffffff8136c60e>] strcmp+0xe/0x30
[  313.536815]  RSP <ffff88025b983db0>
[  313.536981] CR2: 0000000000000010
[  313.537151] ---[ end trace 3d952e590e7bc2d5 ]---

Reported-and-tested-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <mlin@kernel.org>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:32:19 -07:00
Sagi Grimberg
6a92967ccb nvme-fabrics: Remove tl_retry_count
The timeout before error recovery logic kicks in is
dictated by the nvme keep-alive, so we don't really need
a transport layer retry count. transports can retry for
as much as they like.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:31:11 -07:00
Sagi Grimberg
2ac17c283a nvme-rdma: Don't use tl_retry_count
Always use the maximum qp retry count as the
error recovery timeout is dictated from the nvme
keep-alive.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:31:10 -07:00
Wei Yongjun
458a9632ad nvme-rdma: fix the return value of nvme_rdma_reinit_request()
PTR_ERR should be applied before its argument is reassigned, otherwise the
return value will be set to 0, not error code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:27:03 -07:00
vchannaiah
bf294e833b cdrom: support read sub-channel command in LBA format
userspace application can send READ_SUB_CHANNEL command with time bit
enabled and disabled. The time bit allows selection of address reporting
format. If the time bit is disabled the response is in logical block
address(CDROM_LBA) format, represented as a 32-bit integer with ms-byte
first. If the time bit is enabled the response is in time format i.e.,
minutes, second, frame (CDROM_MSF) format.

Signed-off-by: vchannaiah <vanitha.channaiah@in.bosch.com>
Signed-off-by: Mahendran Kuppusamy <mahendran.kuppusamy@in.bosch.com>
[veeraiyan.chidambaram@in.bosch.com: updated Documentation/ioctl/cdrom.txt]
Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:24:50 -07:00
Guilherme G. Piccoli
54adc01055 nvme/quirk: Add a delay before checking for adapter readiness
When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.

After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.

Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-12 08:23:00 -07:00
Jens Axboe
41d512e51b Merge branch 'for-4.8/block' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm into for-4.8/drivers
Dan writes:

"The removal of ->driverfs_dev in favor of just passing the parent
device in as a parameter to add_disk().  See below, it has received a
"Reviewed-by" from Christoph, Bart, and Johannes.

It is also a pre-requisite for Fam Zheng's work to cleanup gendisk
uevents vs attribute visibility [1].  We would extend device_add_disk()
to take an attribute_group list.

This is based off a branch of block.git/for-4.8/drivers and has
received a positive build success notification from the kbuild robot
across several configs.

[1]: "gendisk: Generate uevent after attribute available"
http://marc.info/?l=linux-virtualization&m=146725201522201&w=2"
2016-07-08 16:04:11 -06:00
Christoph Hellwig
7110230719 nvme-rdma: add a NVMe over Fabrics RDMA host driver
This patch implements the RDMA host (initiator in SCSI speak) driver.  It
can be used to connect to remote NVMe over Fabrics controllers over
Infiniband, RoCE or iWarp, and uses the existing NVMe core driver as well
a the new fabrics library.

To connect to all NVMe over Fabrics controller reachable on a given taget
port using RDMA/CM use the following command:

	nvme connect-all -t rdma -a $IPADDR

This requires the latest version of nvme-cli with Fabrics support.

Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Christoph Hellwig
8f000cac6e nvmet-rdma: add a NVMe over Fabrics RDMA target driver
This patch implements the RDMA transport for the NVMe over Fabrics target,
which allows exporting NVMe over Fabrics functionality over RDMA fabrics
(Infiniband, RoCE, iWARP).

All NVMe logic is in the generic target and this module just provides a
small glue between it and the generic code in the RDMA subsystem.

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>,
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Sagi Grimberg
931a6de4d7 nvme-rdma.h: Add includes for nvme rdma_cm negotiation
NVMe over Fabrics RDMA transport defines a connection establishment
protocol over the RDMA connection manager. This header will be used by
both the host and target drivers to negotiate the connection
establishment parameters.

Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Christoph Hellwig
def61eca96 nvme: add new reconnecting controller state
The nvme fabric (RDMA, FC, etc...) can introduce port, link or node
failures that may require a reconnect to re-establish the connection.

Add a new reconnecting state that will initially be used by the RDMA
driver.

Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Sagi Grimberg
486cf9899e blk-mq: Introduce blk_mq_reinit_tagset
The new nvme-rdma driver will need to reinitialize all the tags as part of
the error recovery procedure (realloc the tag memory region). Add a helper
in blk-mq for it that can iterate over all requests in a tagset to make
this easier.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Stephen Bates <Stephen.Bates@pmcs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-08 08:38:49 -06:00
Matias Bjørling
d9e46d5d7c lightnvm: make __nvm_submit_ppa static
The __nvm_submit_ppa() function is not used outside lightnvm core.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
8680f165ea lightnvm: make ppa_list const in nvm_set_rqd_list
The passed by reference ppa list in nvm_set_rqd_list() is updated when
multiple planes are available. In that case, each PPA plane is
incremented when the device side PPA list is created. This prevents the
caller to rely on the PPA list to be unmodified after a call.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
24d4a7d721 lightnvm: fix lun offset calculation for mark blk
The gen_mark_blk_bad function marks the wrong block when a block is on
a different channel. Fix the index calculation, so that it updates the
correct block.

Reported-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
855cdd2c0b lightnvm: make rrpc_map_page call nvm_get_blk outside locks
The nvm_get_blk() function is called with rlun->lock held. This is ok
when the media manager implementation doesn't go out of its atomic
context. However, if a media manager persists its metadata, and
guarantees that the block is given to the target, this is no longer
a viable approach. Therefore, clean up the flow of rrpc_map_page,
and make sure that nvm_get_blk() is called without any locks acquired.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
41285fad51 lightnvm: remove _unlocked variant of [get/put]_blk
The [get/put]_blk API enables targets to get ownership of blocks at
runtime. This information is currently not recorded on disk, and the
information is therefore lost on power failure. To restore the
metadata, the [get/put]_blk must persist its metadata. In that case,
we need to control the outer lock, so that we can disable them while
updating the on-disk metadata. Fortunately, the _unlocked versions can
be removed, which allows us to move the lock into the [get/put]_blk
functions.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
8c39eddbf2 lightnvm: remove unused lists from struct rrpc_block
The ->list, ->open_list, and ->closed_list lists were previously used
for statistics. However, their usage have been removed, and thus these
can safely be removed.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
5cd907853d lightnvm: remove nested lock conflict with mm
If a media manager tries to initialize it targets upon media manager
initialization, the media manager will need to know which target types
are available in LightNVM. The lists of which managers and target types
are available shares the same lock.

Therefore, on initialization, the nvm_lock is taken by LightNVM core,
which later leads to a deadlock when target types are enumerated by the
media manager.

Add an exclusive lock for target types to resolve this conflict.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
b76eb20bb0 lightnvm: move target mgmt into media mgr
To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.

Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
5e60edb7dc lightnvm: rename gennvm and update description
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
077d238999 lightnvm: remove open/close statistics for gennvm
The responsibility of the media manager is not to keep track of
open/closed blocks. This is better maintained within a target,
that already manages this information on writes.

Remove the statistics and merge the states NVM_BLK_ST_OPEN and
NVM_BLK_ST_CLOSED.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
12624af26e lightnvm: fix checkpatch terse errors
A couple of small checkpatch fixups to stop it from complaining.

./drivers/lightnvm/core.c:360: WARNING: line over 80 characters
./drivers/lightnvm/core.c:360: ERROR: trailing statements should be on
next line
./drivers/lightnvm/core.c:503: WARNING: Block comments use a trailing */
on a separate line

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling
5114e2773a lightnvm: remove checkpatch warning for unsigned ints
Checkpatch found two incidents where the type was preferred to be
written out in full.

./drivers/lightnvm/rrpc.h:184: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.h:209: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.c:51: WARNING: Prefer 'unsigned int' to bare use
of 'unsigned'

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Johannes Thumshirn
58eaaf9b6c lightnvm: Make functions not used by ouside static
Mark functions not used by ouside of thier implementing file as static.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Johannes Thumshirn
6f92970219 nvme: lightnvm: make MLC num_pairs little endian
According to the OpenChannel SSD interface specification the NAND flash
MLC page pairing information's number of page page pairings field is the
first two bytes in the MLC Page Pairing data structure. The hardware's
data structure itself is little endian so annotate it as such, like the
rest of lighnvm's data structures.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Javier González
5389a1dfb3 lightnvm: initialize ppa_addr in dev_to_generic_addr()
The ->reserved bit is not initialized when allocated on stack.
This may lead targets to misinterpret the PPA as cached.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Javier González
529435e818 lightnvm: add media manager mark_blk helper
Expose media manager mark_blk() to targets, as done for the rest of the
media manager callback functions.

Signed-off-by: Javier González <javier@cnexlabs.com>
Updated description
Signed-off-by: Matias Bjørling <m@bjorling.me>

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Wenwei Tao
0de2415bb7 lightnvm: break the loop when rqd is not null
Break the loop when rqd is not null to reduce
an unnecessary schedule.

Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Dan Carpenter
f98d9ca17f nvmet: fix an error code
We accidentally return zero here when ERR_PTR(-ENOMEM) is intended.

Fixes: a07b4970f4 ('nvmet: add a generic NVMe target')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:37:36 -06:00
Arnd Bergmann
1fb4704084 nvme-loop: add configfs dependency
CONFIG_NVME_TARGET has a correct CONFIG_CONFIGFS_FS dependency, but the
newly added NVME_TARGET_LOOP is missing this, resulting in a link
failure:

drivers/nvme/built-in.o: In function `nvmet_init_configfs':
loop.c:(.init.text+0x2a0): undefined reference to `config_group_init'
loop.c:(.init.text+0x2c0): undefined reference to `config_group_init_type_name'
loop.c:(.init.text+0x318): undefined reference to `configfs_register_subsystem'
drivers/nvme/built-in.o: In function `nvmet_exit_configfs':
loop.c:(.exit.text+0x9c): undefined reference to `configfs_unregister_subsystem'

This adds the same dependency here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 3a85a5de29 ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:34:45 -06:00
Yijing Wang
89b920e003 bcache: Remove redundant block_size assignment
We have assigned sb->block_size before the switch,
so remove the redundant one.

Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Eric Wheeler <bcache@lists.ewheeler.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:50 -06:00
Yijing Wang
7abc70d700 bcache: update document info
There is no return in continue_at(), update the documentation.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:49 -06:00
Yijing Wang
c50d4d5dd3 bcache: Remove redundant parameter for cache_alloc()
Cache_sb is not used in cache_alloc, and we have copied
sb info to cache->sb already, remove it.

Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:34:47 -06:00
Christoph Hellwig
3a85a5de29 nvme-loop: add a NVMe loopback host driver
This patch implements adds nvme-loop which allows to access local devices
exported as NVMe over Fabrics namespaces. This module can be useful for
easy evaluation, testing and also feature experimentation.

To createa nvme-loop device you need to configure the NVMe target to
export a loop port (see the nvmetcli documentaton for that) and then
connect to it using

	nvme connect-all -t loop

which requires the very latest nvme-cli version with Fabrics support.

Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:30:36 -06:00
Christoph Hellwig
a07b4970f4 nvmet: add a generic NVMe target
This patch introduces a implementation of NVMe subsystems,
controllers and discovery service which allows to export
NVMe namespaces across fabrics such as Ethernet, FC etc.

The implementation conforms to the NVMe 1.2.1 specification
and interoperates with NVMe over fabrics host implementations.

Configuration works using configfs, and is best performed using
the nvmetcli tool from http://git.infradead.org/users/hch/nvmetcli.git,
which also has a detailed explanation of the required steps in the
README file.

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>
Signed-off-by: Anthony Knapp <anthony.j.knapp@intel.com>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:30:33 -06:00
Sagi Grimberg
9645c1a233 block: Export blk_poll
The new NVMe over fabrics target will make use of this outside from a
module.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:30:31 -06:00
Sagi Grimberg
038bd4cb67 nvme: add keep-alive support
Periodic keep-alive is a mandatory feature in NVMe over Fabrics, and
optional in NVMe 1.2.1 for PCIe.  This patch adds periodic keep-alive
sent from the host to verify that the controller is still responsive
and vice-versa.  The keep-alive timeout is user-defined (with
keep_alive_tmo connection parameter) and defaults to 5 seconds.

In order to avoid a race condition where the host sends a keep-alive
competing with the target side keep-alive timeout expiration, the host
adds a grace period of 10 seconds when publishing the keep-alive timeout
to the target.

In case a keep-alive failed (or timed out), a transport specific error
recovery kicks in.

For now only NVMe over Fabrics is wired up to support keep alive, but
we can add PCIe support easily once controllers actually supporting it
become available.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@chelsio.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:20 -06:00
Sagi Grimberg
7b89eae29e nvme.h: Add keep-alive opcode and identify controller attribute
KAS: keep-alive support and granularity of kato in units of 100 ms
nvme_admin_keep_alive opcode: 0x18

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:18 -06:00
Christoph Hellwig
07bfcd09a2 nvme-fabrics: add a generic NVMe over Fabrics library
The NVMe over Fabrics library provides an interface for both transports
and the nvme core to handle fabrics specific commands and attributes
independent of the underlying transport.

In addition, the fabrics library adds a misc device interface that allow
actually creating a fabrics controller, as we can't just autodiscover
it like in the PCI case.  The nvme-cli utility has been enhanced to use
this interface to support fabric connect and discovery.

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>,
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>,
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:16 -06:00
Christoph Hellwig
eb793e2c92 nvme.h: add NVMe over Fabrics definitions
The NVMe over Fabrics specification defines a protocol interface and
related extensions to NVMe that enable operation over network protocols.
The NVMe over Fabrics specification has an NVMe Transport binding for
each NVMe Transport.

This patch adds the fabrics related definitions:
- fabric specific command set and error codes
- transport addressing and binding definitions
- fabrics sgl extensions
- controller identification fabrics enhancements
- discovery log page definition

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:14 -06:00