Commit Graph

4048 Commits

Author SHA1 Message Date
Dan Williams
e105b8bfc7 sysfs: add /sys/dev/{char,block} to lookup sysfs path by major:minor
Why?:
There are occasions where userspace would like to access sysfs
attributes for a device but it may not know how sysfs has named the
device or the path.  For example what is the sysfs path for
/dev/disk/by-id/ata-ST3160827AS_5MT004CK?  With this change a call to
stat(2) returns the major:minor then userspace can see that
/sys/dev/block/8:32 links to /sys/block/sdc.

What are the alternatives?:
1/ Add an ioctl to return the path: Doable, but sysfs is meant to reduce
   the need to proliferate ioctl interfaces into the kernel, so this
   seems counter productive.

2/ Use udev to create these symlinks: Also doable, but it adds a
   udev dependency to utilities that might be running in a limited
   environment like an initramfs.

3/ Do a full-tree search of sysfs.

[kay.sievers@vrfy.org: fix duplicate registrations]
[kay.sievers@vrfy.org: cleanup suggestions]

Cc: Neil Brown <neilb@suse.de>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: SL Baur <steve@xemacs.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Mark Lord <lkml@rtr.ca>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:40 -07:00
Linus Torvalds
93ded9b8fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (100 commits)
  usb-storage: revert DMA-alignment change for Wireless USB
  USB: use reset_resume when normal resume fails
  usb_gadget: composite cdc gadget fault handling
  usb gadget: minor USBCV fix for composite framework
  USB: Fix bug with byte order in isp116x-hcd.c fio write/read
  USB: fix double kfree in ipaq in error case
  USB: fix build error in cdc-acm for CONFIG_PM=n
  USB: remove board-specific UP2OCR configuration from pxa27x-udc
  USB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx
  USB: Fix pointer/int cast in USB devio code
  usb gadget: g_cdc dependso on NET
  USB: Au1xxx-usb: suspend/resume support.
  USB: Au1xxx-usb: clean up ohci/ehci bus glue sources.
  usbfs: don't store bad pointers in registration
  usbfs: fix race between open and unregister
  usbfs: simplify the lookup-by-minor routines
  usbfs: send disconnect signals when device is unregistered
  USB: Force unbinding of drivers lacking reset_resume or other methods
  USB: ohci-pnx4008: I2C cleanups and fixes
  USB: debug port converter does not accept more than 8 byte packets
  ...
2008-07-21 15:42:53 -07:00
Alan Stern
86c57edf60 USB: use reset_resume when normal resume fails
This patch (as1109b) makes USB-Persist more resilient to errors.  With
the current code, if a normal resume fails, it's an unrecoverable
error.  With the patch, if a normal resume fails (and if the device is
enabled for USB-Persist) then a reset-resume is tried.

This fixes the problem reported in Bugzilla #10977.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:48 -07:00
David Brownell
61d8baea5d usb gadget serial: split out generic serial function
Split out the generic serial support into a "function driver".  This
closely mimics the ACM support, but with a MUCH simpler control model.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:07 -07:00
David Brownell
4d5a73dc39 usb gadget serial: split out CDC ACM function
Split out CDC ACM parts of "gadget serial" to a "function driver".
Some key structural differences from the previous ACM support, shared
with with the generic serial function (next patch):

 - As a function driver, it can be combined with other functions.
   One gadget configuration could offer both serial and network
   links, as an example.

 - One serial port can be exposed in multiple configurations;
   the /dev/ttyGS0 node could be exposed regardless of which
   config the host selected.

 - One configuration can expose multiple serial ports, such as
   ttyGS0, ttyGS1, ttyGS2, and ttyGS3.

This code should be a lot easier to understand than the previous
all-in-one-big-file version of the driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:06 -07:00
David Brownell
40982be52d usb gadget: composite gadget core
Add <linux/usb/composite.h> interfaces for composite gadget drivers, and
basic implementation support behind it:

  - struct usb_function ... groups one or more interfaces into a function
    managed as one unit within a configuration, to which it's added by
    usb_add_function().

  - struct usb_configuration ... groups one or more such functions into
    a configuration managed as one unit by a driver, to which it's added
    by usb_add_config().  These operate at either high or full/low speeds
    and at a given bMaxPower.

  - struct usb_composite_driver ... groups one or more such configurations
    into a gadget driver, which may be registered or unregistered.

  - struct usb_composite_dev ... a usb_composite_driver manages this; it
    wraps the usb_gadget exposed by the controller driver.

This also includes some basic kerneldoc.

How to use it (the short version):  provide a usb_composite_driver with a
bind() that calls usb_add_config() for each of the needed configurations.
The configurations in turn have bind() calls, which will usb_add_function()
for each function required.  Each function's bind() allocates resources
needed to perform its tasks, like endpoints; sometimes configurations will
allocate resources too.

Separate patches will convert most gadget drivers to this infrastructure.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:16:01 -07:00
David Brownell
a7707adf9e usb gadget: use new serial core
Teach "gadget serial" to use the new abstracted (and bugfixed) TTY glue,
and remove all the orignal tangled-up code.  Update the documentation
accordingly.  This is a net object code shrink and cleanup; it should
make it a lot easier to see how the TTY glue should accomodate updates
to the TTY layer, be bugfixed, etc.

Notable behavior changes include:  it can now support getty even when
there's no USB connection; it fits properly into the mdev/udev world;
and RX handling is better (throttling works, and low latency).

Configurations with scripts setting up the /dev/ttygserial device node
(with "experimental" major number) may want to change that to be a
symlink pointing to the /dev/ttyGS0 file, as a migration aid; else,
just switch entirely over to mdev/udev.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:59 -07:00
Adrian Bunk
baad4119a3 USB: remove Documentation/usb/uhci.txt
The driver was removed before kernel 2.6.0

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:55 -07:00
Linus Torvalds
eb4225b2da Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (25 commits)
  mmtimer: Push BKL down into the ioctl handler
  [IA64] Remove experimental status of kdump
  [IA64] Update ia64 mmr list for SGI uv
  [IA64] Avoid overflowing ia64_cpu_to_sapicid in acpi_map_lsapic()
  [IA64] adding parameter check to module_free()
  [IA64] improper printk format in acpi-cpufreq
  [IA64] pv_ops: move some functions in ivt.S to avoid lack of space.
  [IA64] pvops: documentation on ia64/pv_ops
  [IA64] pvops: add to hooks, pv_time_ops, for steal time accounting.
  [IA64] pvops: add hooks, pv_irq_ops, to paravirtualized irq related operations.
  [IA64] pvops: add hooks, pv_iosapic_ops, to paravirtualize iosapic.
  [IA64] pvops: define initialization hooks, pv_init_ops, for paravirtualized environment.
  [IA64] pvops: paravirtualize NR_IRQS
  [IA64] pvops: paravirtualize entry.S
  [IA64] pvops: paravirtualize ivt.S
  [IA64] pvops: paravirtualize minstate.h.
  [IA64] pvops: define paravirtualized instructions for native.
  [IA64] pvops: preparation for paravirtulization of hand written assembly code.
  [IA64] pvops: introduce pv_cpu_ops to paravirtualize privileged instructions.
  [IA64] pvops: add an early setup hook for pv_ops.
  ...
2008-07-21 14:55:23 -07:00
Linus Torvalds
e89970aa93 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: nf_conntrack_sctp: fix sparse warnings
  netfilter: nf_nat_sip: c= is optional for session
  netfilter: xt_TCPMSS: collapse tcpmss_reverse_mtu{4,6} into one function
  netfilter: nfnetlink_log: send complete hardware header
  netfilter: xt_time: fix time's time_mt()'s use of do_div()
  netfilter: accounting rework: ct_extend + 64bit counters (v4)
  netlink: add NLA_PUT_BE64 macro
  netfilter: nf_nat_core: eliminate useless find_appropriate_src for IP_NAT_RANGE_PROTO_RANDOM
  hdlcdrv: Fix CRC calculation.
  Revert "pkt_sched: Make default qdisc nonshared-multiqueue safe."
  net: In __netif_schedule() use WARN_ON instead of BUG_ON
  net: Improve simple_tx_hash().
  pkt_sched: Remove unused variable skb in dev_deactivate_queue function.
  sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.
  ucc_geth: do not touch net queue in adjust_link phylib callback
  gianfar: do not touch net queue in adjust_link phylib callback
  atl1: Do not wake queue before queue has been started.
2008-07-21 11:29:52 -07:00
Linus Torvalds
72a73693aa Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (160 commits)
  x86: remove extra calling to get ext cpuid level
  x86: use setup_clear_cpu_cap() when disabling the lapic
  KVM: fix exception entry / build bug, on 64-bit
  x86: add unknown_nmi_panic kernel parameter
  x86, VisWS: turn into generic arch, eliminate leftover files
  x86: add ->pre_time_init to x86_quirks
  x86: extend and use x86_quirks to clean up NUMAQ code
  x86: introduce x86_quirks
  x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
  Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
  x86: remove arch_get_ram_range
  x86: Add a debugfs interface to dump PAT memtype
  x86: Add a arch directory for x86 under debugfs
  x86: i386: reduce boot fixmap space
  i386/xen: add proper unwind annotations to xen_sysenter_target
  x86: reduce force_mwait visibility
  x86: reduce forbid_dac's visibility
  x86: fix two modpost warnings
  x86: check function status in EDD boot code
  x86_64: ia32_signal.c: remove signal number conversion
  ...
2008-07-21 10:34:25 -07:00
Linus Torvalds
8a392625b6 Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md: (52 commits)
  md: Protect access to mddev->disks list using RCU
  md: only count actual openers as access which prevent a 'stop'
  md: linear: Make array_size sector-based and rename it to array_sectors.
  md: Make mddev->array_size sector-based.
  md: Make super_type->rdev_size_change() take sector-based sizes.
  md: Fix check for overlapping devices.
  md: Tidy up rdev_size_store a bit:
  md: Remove some unused macros.
  md: Turn rdev->sb_offset into a sector-based quantity.
  md: Make calc_dev_sboffset() return a sector count.
  md: Replace calc_dev_size() by calc_num_sectors().
  md: Make update_size() take the number of sectors.
  md: Better control of when do_md_stop is allowed to stop the array.
  md: get_disk_info(): Don't convert between signed and unsigned and back.
  md: Simplify restart_array().
  md: alloc_disk_sb(): Return proper error value.
  md: Simplify sb_equal().
  md: Simplify uuid_equal().
  md: sb_equal(): Fix misleading printk.
  md: Fix a typo in the comment to cmd_match().
  ...
2008-07-21 10:29:12 -07:00
Krzysztof Piotr Oledzki
584015727a netfilter: accounting rework: ct_extend + 64bit counters (v4)
Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.

This patch:
 - reimplements accounting with respect to the extension infrastructure,
 - makes one global version of seq_print_acct() instead of two seq_print_counters(),
 - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
 - makes it possible to enable/disable it at runtime by sysctl or sysfs,
 - extends counters from 32bit to 64bit,
 - renames ip_conntrack_counter -> nf_conn_counter,
 - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
 - set initial accounting enable state based on CONFIG_NF_CT_ACCT
 - removes buggy IPCT_COUNTER_FILLING event handling.

If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".

Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-21 10:10:58 -07:00
Ingo Molnar
acee709cab Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', 'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus 2008-07-21 16:37:17 +02:00
Dmitry Torokhov
908cf4b925 Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 into next 2008-07-21 00:55:14 -04:00
Neil Brown
d7027458d6 md: Tidy up rdev_size_store a bit:
- used strict_strtoull in place of simple_strtoull
 - use my_mddev in place of rdev->mddev (they have the same value)
and more significantly,
 - don't adjust mddev->size to fit, rather reject changes which make
   rdev->size smaller than mddev->size

Adjusting mddev->size is a hangover from bind_rdev_to_array which
does a similar thing.  But it really is a better design to insist that
mddev->size is set as required, then the rdev->sizes are set to allow
for that.  The previous way invites confusion.

Signed-off-by: NeilBrown <neilb@suse.de>
2008-07-21 14:22:18 +10:00
Linus Torvalds
14b395e35d Merge branch 'for-2.6.27' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits)
  nfsd: nfs4xdr.c do-while is not a compound statement
  nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c
  lockd: Pass "struct sockaddr *" to new failover-by-IP function
  lockd: get host reference in nlmsvc_create_block() instead of callers
  lockd: minor svclock.c style fixes
  lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
  lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
  lockd: nlm_release_host() checks for NULL, caller needn't
  file lock: reorder struct file_lock to save space on 64 bit builds
  nfsd: take file and mnt write in nfs4_upgrade_open
  nfsd: document open share bit tracking
  nfsd: tabulate nfs4 xdr encoding functions
  nfsd: dprint operation names
  svcrdma: Change WR context get/put to use the kmem cache
  svcrdma: Create a kmem cache for the WR contexts
  svcrdma: Add flush_scheduled_work to module exit function
  svcrdma: Limit ORD based on client's advertised IRD
  svcrdma: Remove unused wait q from svcrdma_xprt structure
  svcrdma: Remove unneeded spin locks from __svc_rdma_free
  svcrdma: Add dma map count and WARN_ON
  ...
2008-07-20 21:21:46 -07:00
Linus Torvalds
f894d18380 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits)
  V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms.
  V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups
  V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels
  V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings
  V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on
  V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C
  V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c
  V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places
  V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF
  V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on"
  V4L/DVB (8390): videodev: add comment and remove magic number.
  V4L/DVB (8389): videodev: simplify get_index()
  V4L/DVB (8387): Some cosmetic changes
  V4L/DVB (8381): ov7670: fix compile warnings
  V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name.
  V4L/DVB (8379): saa7127: Make device detection optional
  V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup
  V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct
  V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup
  V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver.
  ...
2008-07-20 21:14:42 -07:00
Linus Torvalds
db6d8c7a40 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits)
  iucv: Fix bad merging.
  net_sched: Add size table for qdiscs
  net_sched: Add accessor function for packet length for qdiscs
  net_sched: Add qdisc_enqueue wrapper
  highmem: Export totalhigh_pages.
  ipv6 mcast: Omit redundant address family checks in ip6_mc_source().
  net: Use standard structures for generic socket address structures.
  ipv6 netns: Make several "global" sysctl variables namespace aware.
  netns: Use net_eq() to compare net-namespaces for optimization.
  ipv6: remove unused macros from net/ipv6.h
  ipv6: remove unused parameter from ip6_ra_control
  tcp: fix kernel panic with listening_get_next
  tcp: Remove redundant checks when setting eff_sacks
  tcp: options clean up
  tcp: Fix MD5 signatures for non-linear skbs
  sctp: Update sctp global memory limit allocations.
  sctp: remove unnecessary byteshifting, calculate directly in big-endian
  sctp: Allow only 1 listening socket with SO_REUSEADDR
  sctp: Do not leak memory on multiple listen() calls
  sctp: Support ipv6only AF_INET6 sockets.
  ...
2008-07-20 17:43:29 -07:00
Linus Torvalds
f7df406dce Merge branch 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6
* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6:
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
2008-07-20 17:17:52 -07:00
Haavard Skinnemoen
6bb0e3a59a Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops
Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:34 -07:00
Jean-Francois Moine
c91256c27b V4L/DVB (8371): gspca: Webcam 08ca:2050 added.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:27:37 -03:00
Hans de Goede
3647fea840 V4L/DVB (8356): gspca: 352x288 mode fix and source clean-up for Sonix bridges.
sonixb:   Bad initialization of sensor for 352x288 mode.
                (from Hans de Goede)
sonixj:   Clean-up source.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:26:33 -03:00
Hermann Pitton
0b17d0edbc V4L/DVB (8319): saa7134: Add support for analog only ASUSTeK P7131
saa7134: add a separate entry for the ASUSTeK P7131 analog only
         and do some eeprom detection to escape from the TVFM7135
         with the same PCI subsystem on auto detection.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:24:45 -03:00
Massimo Piccioni
e2fc00c211 V4L/DVB (8244): saa7134: add support for AVerMedia M103
The following patch updates saa7134 driver to add support for AVerMedia
M103 MiniPCI DVB-T Hybrid card.

Signed-off-by: Massimo Piccioni <alsa@piccio.org>
[mchehab@infradead.org: fixed merge conflicts and a small codingstyle]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:18:29 -03:00
Douglas Schilling Landgraf
69b28b1109 V4L/DVB (8184): spca508: Add Clone Digital Webcam 11043
Added ID vendor/product for Clone Digital Webcam 11043.
Thanks to Ivan Brasil Fuzzer <ivan@fuzzer.com.br> for testing and data collection.

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:16:10 -03:00
Hans Verkuil
1a3932e0ed V4L/DVB (8168): cx18: Upgrade to newer firmware & update cx18 documentation.
Conexant graciously gave us permission to redistribute the
firmware. Update the documentation where the firmware can be
downloaded.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:15:30 -03:00
Hans Verkuil
86d674a132 V4L/DVB (8168a): cx18: Update cx18 documentation.
Update the documentation, providing an updated list of supported boards.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:15:25 -03:00
Jean-Francois Moine
6a7eba24e4 V4L/DVB (8157): gspca: all subdrivers
- remaning subdrivers added
- remove the decoding helper and some specific frame decodings

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:14:49 -03:00
Jean-Francois Moine
63eb9546dc V4L/DVB (8152): Initial release of gspca with only one driver.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:14:28 -03:00
Daniel Gimpelevich
bfda3a0b32 V4L/DVB (8124): Add LifeVideo To-Go Cardbus PCI ID
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:12:53 -03:00
Devin Heitmueller
a9fc52bcbe V4L/DVB (8123): Add support for em2860 based PointNix Intra-Oral Camera
em28xx-cards.c
em28xx-input.c
em28xx-video.c
em28xx.h
 - Add support for the PointNix Intra-Oral Camera, which required addition of
   a construct for reading the "snapshot" button (provided on the em2860 and
   em2880 chips, but this is the first case where I have seen it actually used
   in a product). The button is wired to pin 56 on the em2880.

   http://www.pointnix.com/ENG/dental/product_02.asp

   Thanks to Roberto Mantovani <rmantovani@libero.it> for testing the changes

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:12:48 -03:00
Dmitry Belimov
878cf2a5d8 V4L/DVB (8021): Beholder's cards description
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63
has chip with AC3 codec, M6 Extra has other type of HF module.
Add correct data for support MPEG encoder.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:09:08 -03:00
Devin Heitmueller
17d9d558e8 V4L/DVB (8006): em28xx: Split HVR900 into two separate entries
- Separate the newer variant of the HVR-900 into its own device profile
   because it has a Micronas DRX397 instead of the Zarlink demod.  This
   doesn't make the device work, but at least we don't try to initialize it
   as though it had the Zarlink device.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
[mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:08:49 -03:00
Devin Heitmueller
4fd305b2a2 V4L/DVB (7992): Add support for Pinnacle PCTV HD Pro stick (the older variant 2304:0227)
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:08:19 -03:00
Michael Krufky
335377b73d V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual Express
Only one frontend is enabled right now. The second frontend can lock,
but transport doesn't work yet.  The device will be supported as a
single tuner device until the second frontend is working.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:08:09 -03:00
Simon Arlott
e3a61b0a8c x86: add unknown_nmi_panic kernel parameter
It's not possible to enable the unknown_nmi_panic sysctl option
until init is run. It's useful to be able to panic the kernel
during boot too, this adds a parameter to enable this option.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:10:31 +02:00
Yinghai Lu
caadbdce24 x86: enable memory tester support on 32-bit
only supports memory below max_low_pfn.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 14:11:58 +02:00
David S. Miller
49997d7515 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c
2008-07-18 02:39:39 -07:00
David S. Miller
09e83b5d7d netdev: Kill NETIF_F_MULTI_QUEUE.
There is no need for a feature bit for something that
can be tested by simply checking the TX queue count.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17 19:21:03 -07:00
Joel Becker
a6795e9ebb configfs: Allow ->make_item() and ->make_group() to return detailed errors.
The configfs operations ->make_item() and ->make_group() currently
return a new item/group.  A return of NULL signifies an error.  Because
of this, -ENOMEM is the only return code bubbled up the stack.

Multiple folks have requested the ability to return specific error codes
when these operations fail.  This patch adds that ability by changing the
->make_item/group() ops to return ERR_PTR() values.  These errors are
bubbled up appropriately.  NULL returns are changed to -ENOMEM for
compatibility.

Also updated are the in-kernel users of configfs.

This is a rework of reverted commit 11c3b79218.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-17 15:21:29 -07:00
Joel Becker
f89ab8619e Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
This reverts commit 11c3b79218.  The code
will move to PTR_ERR().

Signed-off-by: Joel Becker <joel.becker@oracle.com>
2008-07-17 14:53:48 -07:00
Linus Torvalds
5b664cb235 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] ocfs2: fix oops in mmap_truncate testing
  configfs: call drop_link() to cleanup after create_link() failure
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  configfs: Fix failing mkdir() making racing rmdir() fail
  configfs: Fix deadlock with racing rmdir() and rename()
  configfs: Make configfs_new_dirent() return error code instead of NULL
  configfs: Protect configfs_dirent s_links list mutations
  configfs: Introduce configfs_dirent_lock
  ocfs2: Don't snprintf() without a format.
  ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
  ocfs2/net: Silence build warnings on sparc64
  ocfs2: Handle error during journal load
  ocfs2: Silence an error message in ocfs2_file_aio_read()
  ocfs2: use simple_read_from_buffer()
  ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
  [PATCH 2/2] ocfs2: Instrument fs cluster locks
  [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option
2008-07-17 10:55:51 -07:00
Tony Luck
fca515fbfa Pull pvops into release branch 2008-07-17 10:53:37 -07:00
Linus Torvalds
dc7c65db28 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.
2008-07-16 17:25:46 -07:00
Linus Torvalds
9c1be0c471 Merge branch 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6
* 'for_linus' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: include to compilation
  UBIFS: add new flash file system
  UBIFS: add brief documentation
  MAINTAINERS: add UBIFS section
  do_mounts: allow UBI root device name
  VFS: export sync_sb_inodes
  VFS: move inode_lock into sync_sb_inodes
2008-07-16 15:02:57 -07:00
Linus Torvalds
42fdd144a4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (76 commits)
  IDE: Report errors during drive reset back to user space
  Update documentation of HDIO_DRIVE_RESET ioctl
  IDE: Remove unused code
  IDE: Fix HDIO_DRIVE_RESET handling
  hd.c: remove the #include <linux/mc146818rtc.h>
  update the BLK_DEV_HD help text
  move ide/legacy/hd.c to drivers/block/
  ide/legacy/hd.c: use late_initcall()
  remove BLK_DEV_HD_ONLY
  ide: endian annotations in ide-floppy.c
  ide-floppy: zero out the whole struct ide_atapi_pc on init
  ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open
  ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path
  ide-cd: move request prep from cdrom_start_rw_cont to rq issue path
  ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path
  ide-cd: fold cdrom_start_seek into ide_cd_do_request
  ide-cd: simplify request issuing path
  ide-cd: mv ide_do_rw_cdrom ide_cd_do_request
  ide-cd: cdrom_start_seek: remove unused argument block
  ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block
  ...
2008-07-16 14:53:54 -07:00
Zhao Yakui
da5e09a1b3 ACPI : Create "idle=nomwait" bootparam
"idle=nomwait" disables the use of the MWAIT
instruction from both C1 (C1_FFH) and deeper (C2C3_FFH)
C-states.

When MWAIT is unavailable, the BIOS and OS generally
negotiate to use the HALT instruction for C1,
and use IO accesses for deeper C-states.

This option is useful for power and performance
comparisons, and also to work around BIOS bugs
where broken MWAIT support is advertised.

http://bugzilla.kernel.org/show_bug.cgi?id=10807
http://bugzilla.kernel.org/show_bug.cgi?id=10914

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Li Shaohua <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Zhao Yakui
c1e3b377ad ACPI: Create "idle=halt" bootparam
"idle=halt" limits the idle loop to using
the halt instruction.  No MWAIT, no IO accesses,
no C-states deeper than C1.

If something is broken in the idle code,
"idle=halt" is a less severe workaround
than "idle=poll" which disables all power savings.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:05 +02:00
Zhang Rui
71b58cbb0c ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from user-space
Allow users to enable/disable/clear a specific & valid GPE/Fixed Event
in user space.

This is useful for debugging, especially for some
interrupt storm issues.

All wakeup GPEs are disabled and they can not be enabled at runtime,
and we mark them as invalid.

All GPEs that don't have a _Lxx/_Exx method are marked as invalid.

All Fixed Events that don't have an event handler are marked as invalid
and they can't be enabled until an event handler is registered.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ling Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-07-16 23:27:04 +02:00