Commit Graph

85 Commits

Author SHA1 Message Date
Joe Perches
8e95a2026f drivers/net: Move && and || to end of previous line
Only files where David Miller is the primary git-signer.
wireless, wimax, ixgbe, etc are not modified.

Compile tested x86 allyesconfig only
Not all files compiled (not x86 compatible)

Added a few > 80 column lines, which I ignored.
Existing checkpatch complaints ignored.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03 13:18:01 -08:00
Simon Kagstrom
b06f78f4d0 via-velocity: Set tx checksum from ethtool instead of module parameter
Defaults to on (as before).

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:25 -08:00
Simon Kagstrom
c79992fdde via-velocity: Re-enable transmit scatter-gather support
The velocity hardware can handle up to 7 memory segments. This can be
turned on and off via ethtool. The support was removed in commit

  83c98a8cd0

but is re-enabled and cleaned up here. It's off by default.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:22 -08:00
Simon Kagstrom
2a5774f7d8 via-velocity: Change DMA_LENGTH_DEF (from the VIA driver)
The VIA driver has changed the default for the DMA_LENGTH_DEF parameter.
Together with adaptive interrupt supression and NAPI support, this
improves performance quite a bit

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:18 -08:00
Simon Kagstrom
dfff7144b1 via-velocity: Implement NAPI support
This patch adds NAPI support for VIA velocity. The new velocity_poll
function also pairs tx/rx handling twice which improves perforamance on
some workloads (e.g., netperf UDP_STREAM) significantly (that part is
from the VIA driver).

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:15 -08:00
Simon Kagstrom
6dfc4b95b2 via-velocity: Add ethtool interrupt coalescing support
(Partially from the upstream VIA driver). Tweaking the number of
frames-per-interrupt and timer-until-interrupt can reduce the amount of
CPU work quite a lot.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:10 -08:00
Simon Kagstrom
da95b2d422 via-velocity: Correct 64-byte alignment for rx buffers
(From the VIA driver). The current code does not guarantee 64-byte
alignment since it simply does

        int add = skb->data & 63;

        skb->data += add;

(via skb_reserve). So for example, if the skb->data address would be
0x10, this would result in 32-byte alignment (0x10 + 0x10).

Correct by adding

        64 - (skb->data & 63)

instead.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-26 15:51:06 -08:00
Julia Lawall
1ede9b52fa drivers/net/via-velocity.c: remove exceptional & on function name
In this file, function names are otherwise used as pointers without &.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f;
@@

f(...) { ... }

@@
identifier r.f;
@@

- &f
+ f
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18 10:48:50 -08:00
Ben Hutchings
516b4df1ce via-velocity: Remove private device list
via-velocity maintains a list of its devices in order to determine
whether a netdev notification applies to one of them.  That can be
determined simply by checking the netdev_ops pointer, so the list can
be removed.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28 04:01:46 -07:00
Eric Dumazet
89d71a66c4 net: Use netdev_alloc_skb_ip_align()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 11:48:18 -07:00
Ben Hutchings
7ab0f2736b netdev: Remove redundant checks for CAP_NET_ADMIN in MDIO implementations
dev_ioctl() already checks capable(CAP_NET_ADMIN) before calling the
driver's implementation of MDIO ioctls.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03 20:02:11 -07:00
David S. Miller
6cdee2f96a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/yellowfin.c
2009-09-02 00:32:56 -07:00
Stephen Hemminger
61357325f3 netdev: convert bulk of drivers to netdev_tx_t
In a couple of cases collapse some extra code like:
   int retval = NETDEV_TX_OK;
   ...
   return retval;
into
   return NETDEV_TX_OK;

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:14:07 -07:00
roel kluin
0527a1a844 via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULL
Test whether VELOCITY_DUPLEX_FULL bit is set in mii_status.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 16:30:37 -07:00
Dave Jones
2cf71d2e38 Remove unnecessary forward declarations from velocity NIC driver.
By moving functions to before their first call, we eliminate
the need to define forward references.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23 18:11:12 -07:00
Dave Jones
c40674001b Fix up CodingStyle problems in via-velocity.c
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23 18:01:53 -07:00
Dave Jones
83c98a8cd0 Remove unused zero-copy code from velocity NIC driver.
This code hasn't been enabled in forever.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-23 18:01:37 -07:00
Patrick McHardy
6ed106549d net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions
This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05 19:16:04 -07:00
Dave Jones
f6b24caaf9 via-velocity: Fix velocity driver unmapping incorrect size.
When a packet is greater than ETH_ZLEN, we end up assigning the
boolean result of a comparison to the size we unmap.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-21 22:42:30 -07:00
Séguier Régis
d3b238a03e via-velocity : fix no link detection on boot
on boot, link is always up.

Signed-off-by: Seguier Regis <rseguier@e-teleport.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-18 00:29:11 -07:00
Eric Dumazet
553e233562 net: use netdev stats in b44, sundance, via-rhine and via-velocity
Use struct net_device_stats provided in struct net_device instead of
private ones.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27 15:47:07 -07:00
Séguier Régis
3ca17dfbdc via-velocity : fix compilation warning.
Fix this warning:
drivers/net/via-velocity.c:1924: warning: passing argument 2 of 'request_irq' from incompatible pointer type

Signed-off-by: Seguier Regis <rseguier@e-teleport.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-11 01:52:38 -07:00
Dave Jones
59f8e169e2 via-velocity: Fix DMA mapping length errors on transmit.
From: Dave Jones <davej@redhat.com>

The dma-debug changes caught that this driver uses the
wrong DMA mapping length when skb_padto() does something.

With suggestions from Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 13:37:46 -07:00
roel kluin
0d1cfd20cc via-velocity: fix hot spin
while(--j >= 0) keeps spinning when j is unsigned:

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-20 14:44:01 -08:00
Stephen Hemminger
fe96aaa14f netdev: add missing set_mac_address hook
Many drivers lost the ability to set ethernet address accidently
during the net_device_ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:36 -08:00
Stephen Hemminger
008298231a netdev: add more functions to netdevice ops
This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
Stephen Hemminger
39a11bd910 via-velocity: convert to net_device_ops
Convert this driver to network device ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:42:51 -08:00
David S. Miller
198d6ba4d7 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/isdn/i4l/isdn_net.c
	fs/cifs/connect.c
2008-11-18 23:38:23 -08:00
Joey Zhuo
5f5c4bdb14 via-velocity: enable perfect filtering for multicast packets
Signed-off-by: Joey Zhuo <joeyzhuo@via.com.tw>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-16 00:39:35 -08:00
David S. Miller
babcda74e9 drivers/net: Kill now superfluous ->last_rx stores.
The generic packet receive code takes care of setting
netdev->last_rx when necessary, for the sake of the
bonding ARP monitor.

Drivers need not do it any more.

Some cases had to be skipped over because the drivers
were making use of the ->last_rx value themselves.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 21:11:17 -08:00
Sven Hartge
07b5f6a6fd via-velocity: use driver string instead of dev->name before register_netdev()
This patch corrects a message bug in the via-velocity driver which
bothered me for some time.

The messages printed during device init look like the following:

[    8.486422] eth%d: set value of parameter Wake On Lan options to 0
                  ^^!
[    8.487340] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter

Note the unresolved format string.

dev->name is unavailable before register_netdev, so use
dev_driver_string(&pdev->dev), which is also consistent with other
drivers.

"char *devname" parameters had to be converted to "const char *devname" to
be consistent with dev_driver_string return value.

Signed-off-by: Sven Hartge <sven@svenhartge.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27 15:12:02 -04:00
Alan Cox
113aa838ec net: Rationalise email address: Network Specific Parts
Clean up the various different email addresses of mine listed in the code
to a single current and valid address. As Dave says his network merges
for 2.6.28 are now done this seems a good point to send them in where
they won't risk disrupting real changes.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13 19:01:08 -07:00
Francois Romieu
822f1a57d2 via-velocity: Fix warnings on sparc64.
As reported by Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 15:55:15 -07:00
Francois Romieu
3c4dc7115d via-velocity: velocity_init_{rd/tx}_ring use kcalloc(..., GFP_KERNEL).
Allocate and free everyting outside of the locked section.

Spotted-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Seguier Regis <rseguier@e-teleport.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-31 23:08:06 +02:00
Francois Romieu
0fe9f15ee8 via-velocity: separated struct allow wholesale copy during MTU changes.
It should help people fix the bugs in my code :o)

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-31 23:08:04 +02:00
Francois Romieu
9088d9a426 via-velocity: add velocity_set_rxbufsize helper
It removes a dependancy from velocity_init_rd_ring to dev->mtu.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:10:15 -04:00
Francois Romieu
2813317608 via-velocity: move residual free rx descriptors count register update
Updates of the RBRDU have two different meanings depending on their
context:
1. the receiving process has not started - the value which is written
   into the RBRDU register is supposed to be the free rx descriptors
   count (rounded to a multiple of 4)
2. the receiving process is running - the value increments the count
   above (sic)

The update is currently issued deep inside the rx replenish chain (see
velocity_give_many_rx_descs).

Let's propagate enough information to the caller so that the rx
replenish functions do not depend on hardware any more.

It is needed to perform the Rx/Tx buffers housekeeping when MTU changes.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:10:15 -04:00
Francois Romieu
8ac53afccf via-velocity: lean and clean velocity_init_rings
- PCI consistent areas need no memset
- use dev_err instead of plain printk
- avoid a few casts

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:10:14 -04:00
Francois Romieu
580a690208 via-velocity: remove the bounce buffers
Executive summary: the bounce buffers are in my way

- they use something like a 64 * 1500 bytes area of PCI
  consistent area
- they are not resized when the MTU changes
- they are used
  - to hand-pad undersized packets. skb_pad anyone ?
  - to linearize fragmented skbs whose fragment count
    goes beyond the 7 fragments hardware limit in order
    to claim scatter-gather support

Actually the SG code is commented out and I wonder if it
could not be implemented (ab-)using the large send feature
of the chipset since the latter should support some
multi-descriptor packet transmitting.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Séguier Régis <rseguier@e-teleport.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11 01:10:13 -04:00
Stephen Hemminger
c03571a3e2 via-velocity: use memmove
Use memmove to handle overlapping copy of data.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 14:12:55 -04:00
Stephen Hemminger
c73d2589b7 via-velocity: use netdev_alloc_skb
Use netdev_alloc_skb for rx buffer allocation. This sets skb->dev
and can be overriden for NUMA machines.

Change code to return new buffer rather than call by reference.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 14:12:50 -04:00
Francois Romieu
d4f73c8e45 via-velocity: fix vlan receipt
- vlans were using a single CAM register (see mac_set_vlan_cam)
- setting the address filtering registers for vlans is not
  needed when there is no vlan

The non-tagged interface is filtered out as soon as a tagged
(!= 0) interface is created. Its traffic appears again when an
zero-tagged interface is created.

Tested on Via Epia SN (VT6130 chipset) with several vlans whose
tag was above or beyond 255.

Signed-off-by: Séguier Régis <rseguier@e-teleport.net>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25 02:45:23 -04:00
YOSHIFUJI Hideaki
c346dca108 [NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.
Introduce per-net_device inlines: dev_net(), dev_net_set().
Without CONFIG_NET_NS, no namespace other than &init_net exists.
Let's explicitly define them to help compiler optimizations.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26 04:39:53 +09:00
Denis V. Lunev
6133fb1aa1 [NETNS]: Disable inetaddr notifiers in namespaces other than initial.
ip_fib_init is kept enabled. It is already namespace-aware.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 20:46:17 -08:00
Denis V. Lunev
a337499f66 [IPV4]: Remove ifa != NULL check.
This is a callback registered to inet address notifier chain.
The check is useless as:
- ifa is always != NULL
- similar checks are abscent in all other notifiers.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28 20:44:27 -08:00
Andrew Morton
4f14b92f45 via-velocity: section fix
From: Andrew Morton <akpm@linux-foundation.org>

gcc-3.4.4 on powerpc:

drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict

on this one I had to remove the __devinitdata too.  Don't know why.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09 23:41:40 -08:00
Al Viro
4a51c0d02c big-endian support for via-velocity
* kill bitfields
* annotate
* add missing conversions
* fix a couple of brainos in zerocopy stuff (fortunately, it's ifdef'ed out)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:27 -08:00
Stephen Hemminger
48f6b05361 via-velocity: don't oops on MTU change (resend)
The VIA veloicty driver needs the following to allow changing MTU when down.
The buffer size needs to be computed when device is brought up, not when
device is initialized.  This also fixes a bug where the buffer size was
computed differently on change_mtu versus initial setting.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01 16:35:51 -05:00
Stephen Hemminger
bd7b3f3419 [VIA_VELOCITY]: Don't oops on MTU change.
Simple mtu change when device is down.
Fix http://bugzilla.kernel.org/show_bug.cgi?id=9382.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 19:47:27 -08:00
Robert P. J. Day
3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00