This new command is a wrapper on top of perf record and perf report to
make it easier to configure for memory access profiling.
To record loads:
$ perf mem -t load rec .....
To record stores:
$ perf mem -t store rec .....
To get the report:
$ perf mem -t load rep
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-15-git-send-email-eranian@google.com
[ Fixed minor conflict with 66857b5 "Sort command-list.txt alphabetically" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move them to util.c and simplify code a bit.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-6-git-send-email-bp@alien8.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This introduces the tools/lib/lk library, that will gradually have the
routines that now are used in tools/perf/ and other tools and that can
be shared.
Start by carving out debugfs routines for general use.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1361374353-30385-5-git-send-email-bp@alien8.de
[ committer note: Add tools/lib/lk/ to perf's MANIFEST so that its tarballs continue to build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some would just call exit() anyway right after calling die() and the
main routine doesn't have to call it, just return the exit value.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nzq0sdur6oq6lgkt2ipf4o8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add config option for launching GTK browser for the specified command by
default. Currently only 'report' command is supported.
Adding following line to the perfconfig file will have a same effect of
specifying --gtk option on command line (unless other related options
are not given).
$ cat ~/.perfconfig
[gtk]
report = true
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352688617-25570-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idea is run perf session with kidnapping sys_perf_event_open
function. For each sys_perf_event_open call we store the perf_event_attr
data to the file to be checked later against what we expect.
You can run this by:
$ python ./tests/attr.py -d ./tests/attr/ -p ./perf -v
v2 changes:
- preserve errno value in the hook
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121031145247.GB1027@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.
Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:
1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.
2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its such a common need that we might as well have a global with that
value.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mwfqji9f17k5j81l1404dk3q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For building perf without libaudit, we can set NO_LIBAUDIT=1 as a
argument of make. It then defines NO_LIBAUDIT_SUPPORT macro for C code
to do the proper handling. However it usually used in a negative
semantics - e.g. #ifndef - so we saw double negations which can be
misleading. Convert it to a positive form to make it more readable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For building perf without libelf, we can set NO_LIBELF=1 as a argument
of make. It then defines NO_LIBELF_SUPPORT macro for C code to do the
proper handling. However it usually used in a negative semantics -
e.g. #ifndef - so we saw double negations which can be misleading.
Convert it to a positive form to make it more readable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348824728-14025-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newly added trace command requires an external audit library.
However it can cause a build error because it's not checked whether the
libaudit is installed on system:
CC builtin-trace.o
builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory
compilation terminated.
make: *** [builtin-trace.o] Error 1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1348745018-21744-1-git-send-email-namhyung@kernel.org
[ committer note: Added ", disables 'trace tool' to the feature warning msg ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initially should look loosely like the venerable 'strace' tool, but
using the infrastructure in the perf tools to allow tracing extra
targets:
[acme@sandy linux]$ perf trace --hell
Error: unknown option `hell'
usage: perf trace <PID>
-p, --pid <pid> trace events on existing process id
--tid <tid> trace events on existing thread id
--all-cpus system-wide collection from all CPUs
--cpu <cpu> list of cpus to monitor
--no-inherit child tasks do not inherit counters
--mmap-pages <n> number of mmap data pages
--uid <user> user to profile
[acme@sandy linux]$
Those should have the same semantics as when using with 'perf record'.
It gets stuck sometimes, but hey, it works sometimes too!
In time it should support perf.data based workloads, i.e. it should have
a:
-o filename
Command line option that will produce a perf.data file that can then be
used with 'perf trace' or any of the other perf tools (script, report,
etc).
It will also eventually have the set of functionalities described in the
previous 'trace' prototype by Thomas Gleixner:
"Announcing a new utility: 'trace'"
http://lwn.net/Articles/415728/
Also planned is to have some of the features suggested in the comments
of that LWN article.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pthread variables are used in some files without explicitely including
pthread.h. This leads to compile errors on Android. e.g.: in annotate.h,
error: unknown type name 'pthread_mutex_t'
Including pthread.h explicitely in files that use it to have all definitions
included.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347065004-15306-8-git-send-email-irina.tirdea@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have isolated all ELF-specific stuff, it's possible to build
without libelf. The output binary can do most of jobs but lacks (user
level) symbol information - kernel symbols are still accessable thanks
to the kallsyms.
To build perf without libelf (elfutils), give NO_LIBELF=1 to make.
For now, only 'perf probe' command is removed since it depends on
libelf/libdw heavily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to have two PATH_MAX char sized arrays holding it, just
one in util/debugfs.c will do.
Also rename debugfs_path to tracing_events_path, as it is not the path
to debugfs, that is debugfs_mountpoint. Both are now accessible.
This will allow accessing this code in the perf python binding without
having to drag in perf.c and util/parse-events.c.
The defaults for these variables are the canonical "/sys/kernel/debug"
and "/sys/kernel/debug/tracing/events/", removing the need for simple
tools to call debugfs_mount(NULL).
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ug9jvtjrsqbluuhqqxpvg30f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To do that we needed to stop using newtForm, as we don't want libnewt to
catch the xterm resize signal.
Remove some more newt calls and instead use the underlying libslang
directly. In time tools/perf will use just libslang.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-h1824yjiru5n2ivz4bseizwj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to defer calling perf_evsel_list__delete() till after atexit
registered routines, because we need to traverse the events being
recorded at that time at least on 'perf record'.
This fixes the problem reported by Thomas Renninger where cmd_record
called by cmd_timechart would not write the tracing data to the perf.data
file header because the evsel_list at atexit (control+C on 'perf timechart
record') time would be empty, being already deleted by run_builtin(),
and thus 'perf timechart' when trying to process such perf.data file would
die with:
"no trace data in the file"
Problem introduced in 70d544d.
Reported-by: Thomas Renninger <trenn@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Free the perf trace name space and rename the trace to 'script' which is a
better match for the scripting engine.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the ability to specify an alternate directory to store the
buildid cache (buildids, copy of binaries). By default, it is hardcoded to
$HOME/.debug. This directory contains immutable data. The layout of the
directory is such that no conflicts in filenames are possible. A modification
in a file, yields a different buildid and thus a different location in the
subdir hierarchy.
You may want to put the buildid cache elsewhere because of disk space
limitation or simply to share the cache between users. It is also useful for
remote collect vs. local analysis of profiles.
This patch adds a new config option to the perfconfig file. Under the tag
'buildid', there is a dir option. For instance, if you have:
$ cat /etc/perfconfig
[buildid]
dir = /var/cache/perf-buildid
All buildids and binaries are be saved in the directory specified. The perf
record, buildid-list, buildid-cache, report, annotate, and archive commands
will it to pull information out.
The option can be set in the system-wide perfconfig file or in the
$HOME/.perfconfig file.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the same scheme as for git's/perf's pager setup, i.e. if one
doesn't want to, on a newt enabled perf binary, to disable the TUI for
'perf report', its just a matter of doing:
[root@doppio linux-2.6-tip]# printf "[tui]\n\nreport = off\n" >
/root/.perfconfig
[root@doppio linux-2.6-tip]# cat /root/.perfconfig
[tui]
report = off
[root@doppio linux-2.6-tip]#
System wide settings are also possible, by editing /etc/perfconfig, etc,
i.e. the git machinery for config files applies to perf as well, so when
in doubt where to put your settings, consult the git documentation, if
it fails, please let us know.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Discussed-with: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First an example with the first internal test:
[acme@doppio linux-2.6-tip]$ perf test
1: vmlinux symtab matches kallsyms: Ok
So it run just one test, that is "vmlinux symtab matches kallsyms", and it was
successful.
If we run it in verbose mode, we'll see details about errors and extra warnings
for non-fatal problems:
[acme@doppio linux-2.6-tip]$ perf test -v
1: vmlinux symtab matches kallsyms:
--- start ---
Looking at the vmlinux_path (5 entries long)
No build_id in vmlinux, ignoring it
No build_id in /boot/vmlinux, ignoring it
No build_id in /boot/vmlinux-2.6.34-rc4-tip+, ignoring it
Using /lib/modules/2.6.34-rc4-tip+/build/vmlinux for symbols
Maps only in vmlinux:
ffffffff81cb81b1-ffffffff81e1149b 0 [kernel].init.text
ffffffff81e1149c-ffffffff9fffffff 0 [kernel].exit.text
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2
Maps in vmlinux with a different name in kallsyms:
ffffffffff600000-ffffffffff6000ff 0 [kernel].vsyscall_0 in kallsyms as [kernel].0
ffffffffff600100-ffffffffff6003ff 0 [kernel].vsyscall_fn in kallsyms as:
*ffffffffff600100-ffffffffff60012f 0 [kernel].2
ffffffffff600400-ffffffffff6007ff 0 [kernel].vsyscall_1 in kallsyms as [kernel].6
ffffffffff600800-ffffffffffffffff 0 [kernel].vsyscall_2 in kallsyms as [kernel].8
Maps only in kallsyms:
ffffffffff600130-ffffffffff6003ff 0 [kernel].4
---- end ----
vmlinux symtab matches kallsyms: Ok
[acme@doppio linux-2.6-tip]$
In the above case we only know the name of the non contiguous kernel ranges in
the address space when reading the symbol information from the ELF symtab in
vmlinux.
The /proc/kallsyms file lack this, we only notice they are separate because
there are modules after the kernel and after that more kernel functions, so we
need to have a module rbtree backed by the module .ko path to get symtabs in
the vmlinux case.
The tool uses it to match by address to emit appropriate warning, but don't
considers this fatal.
The .init.text and .exit.text ines, of course, aren't in kallsyms, so I left
these cases just as extra info in verbose mode.
The end of the sections also aren't in kallsyms, so we the symbols layer does
another pass and sets the end addresses as the next map start minus one, which
sometimes pads, causing harmless mismatches.
But at least the symbols match, tested it by copying /proc/kallsyms to
/tmp/kallsyms and doing changes to see if they were detected.
This first test also should serve as a first stab at documenting the
symbol library by providing a self contained example that exercises it
together with comments about what is being done.
More tests to check if actions done on a monitored app, like doing mmaps, etc,
makes the kernel generate the expected events should be added next.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show an OK message box with the last message sent via pr_err,
etc.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1269274229-20442-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The use_browser needs to be in a file that is always built and
also we need a browser__show_help stub in that case.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268438710-32697-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Newt has widespread availability and provides a rather simple
API as can be seen by the size of this patch.
The work needed to support it will benefit other frontends too.
In this initial patch it just checks if the output is a tty, if
not it falls back to the previous behaviour, also if
newt-devel/libnewt-dev is not installed the previous behaviour
is maintaned.
Pressing enter on a symbol will annotate it, ESC in the
annotation window will return to the report symbol list.
More work will be done to remove the special casing in
color_fprintf, stop using fmemopen/FILE in the printing of
hist_entries, etc.
Also the annotation doesn't need to be done via spawning "perf
annotate" and then browsing its output, we can do better by
calling directly the builtin-annotate.c functions, that would
then be moved to tools/perf/util/annotate.c and shared with perf
top, etc
But lets go by baby steps, this patch already improves perf
usability by allowing to quickly do annotations on symbols from
the report screen and provides a first experimentation with
libnewt/TUI integration of tools.
Tested on RHEL5 and Fedora12 X86_64 and on Debian PARISC64 to
browse a perf.data file collected on a Fedora12 x86_64 box.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268349164-5822-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adding new subcommand "perf lock" to perf.
I have a lot of remaining ToDos, but for now perf lock can
already provide minimal functionality for analyzing lock
statistics.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-12-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Checked with:
./../scripts/checkpatch.pl --terse --file perf.c
perf.c: 51: ERROR: open brace '{' following function declarations go on the next line
perf.c: 73: ERROR: "foo*** bar" should be "foo ***bar"
perf.c:112: ERROR: space prohibited before that close parenthesis ')'
perf.c:127: ERROR: space prohibited before that close parenthesis ')'
perf.c:171: ERROR: "foo** bar" should be "foo **bar"
perf.c:213: ERROR: "(foo*)" should be "(foo *)"
perf.c:216: ERROR: "(foo*)" should be "(foo *)"
perf.c:217: ERROR: space required before that '*' (ctx:OxV)
perf.c:452: ERROR: do not initialise statics to 0 or NULL
perf.c:453: ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <1264633557-17597-7-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For now it just has operations to examine a given file, find its
build-id and add or remove it to/from the cache.
Useful, for instance, when adding binaries sent together with a
perf.data file, so that we can add them to the cache and have
the tools find it when resolving symbols.
It'll also manage the size of the cache like 'ccache' does.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264008525-29025-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mount debugfs filesystem under '/sys/kernel/debug', if it's not
mounted.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <4B387090.7080407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With this we can list the buildids in a perf.data file so that
we can pipe them to other, distro specific tools that from the
buildids can figure out separate packages (foo-debuginfo) where
we can find the matching symtabs so that perf report can do its
job.
E.g:
[acme@doppio linux-2.6-tip]$ perf buildid-list | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869
520c2387a587cc5acfcf881e27dba1caaeab4b1f
ec8dd400904ddfcac8b1c343263a790f977159dc
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f
379bb828fd08859dbea73279f04abefabc95a6a3
[acme@doppio linux-2.6-tip]$ perf buildid-list -v | head -5
8e08b117e5458ad3f85da16d42d0fc5cd21c5869 /sbin/init
520c2387a587cc5acfcf881e27dba1caaeab4b1f /lib64/ld-2.10.1.so
ec8dd400904ddfcac8b1c343263a790f977159dc /lib64/libc-2.10.1.so
7caedbca5a6d8ab39a7fe44bd28c07d3e14a3f3f /sbin/udevd
379bb828fd08859dbea73279f04abefabc95a6a3 /lib64/libdl-2.10.1.so
[acme@doppio linux-2.6-tip]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1258396365-29217-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()
modify util/parse-events.c to use debugfs_valid_mountpoint().
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use strlen & macros instead of manually counting string lengths as
this is error prone and may lend to bugs.
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Cc: Linus Torvalds <torvalds@osdl.org>
LKML-Reference: <4727185d0910130118m5387058dndb02ac9b384af9f0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Enables 'perf probe' even if libdwarf is not installed. If libdwarf is
not found, 'perf probe' just disables dwarf support. Users can use
'perf probe' to set up new events by using kprobe_events format.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222830.1684.25665.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add perf probe subcommand that implements a kprobe-event setup helper
to the perf command.
This allows user to define kprobe events using C expressions (C line
numbers, C function names, and C local variables).
Usage
-----
perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...]
-k, --vmlinux <file> vmlinux/module pathname
-P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]>
probe point definition, where
p: kprobe probe
r: kretprobe probe
GRP: Group name (optional)
NAME: Event name
FUNC: Function name
OFFS: Offset from function entry (in byte)
SRC: Source code path
LINE: Line number
ARG: Probe argument (local variable name or
kprobe-tracer argument format is supported.)
Changes in v4:
- Add _GNU_SOURCE macro for strndup().
Changes in v3:
- Remove -r option because perf always be used for online kernel.
- Check malloc/calloc results.
Changes in v2:
- Check synthesized string length.
- Rename perf kprobe to perf probe.
- Use spaces for separator and update usage comment.
- Check error paths in parse_probepoint().
- Check optimized-out variables.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
timechart is a tool to visualize what is going on in the system.
The user makes a trace of what is going on with
> perf record --timechart /usr/bin/some_command
and then can turn the output of this into an svg file
> perf timechart
which then can be viewed with any SVG view; inkscape works well
enough for me.
The idea behind timechart is to create a "infinitely zoomable"
picture; something that has high level information on a 1:1 zoom
level, but which exposes more details every time you zoom into a
specific area.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130713.6a77bbc0@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
